2
REV-7/14 DIMENSIONS 4” VERTICAL IC COMPACT FLUORESCENT NEW CONSTRUCTION HOUSING 26W COMPACT FLUORESCENT LAMP ICPL426E, ICPL426EN G5.1.31 Project: Fixture Type: Location: Contact/Phone: 7 3/4" 9 1/8" 15 1/2" 18 1/2" 13 1/2" Will expand to 25" (Reduces to 9 1/8" with breakaway feature) PRODUCT CODES Catalog Number Input Voltage Lamp Rating (max.) Ballast ICPL426E 120V 26W Triple Tube (4-pin) CFL HPF ICPL426EN 120V 26W Triple Tube (4-pin) CFL NPF ICPL426EN-DB120 120V 26W Triple Tube (4-pin) CFL NPF This product is T24 compliant 4 1/2” CEILING CUTOUT PRODUCT DESCRIPTION ICPL, Air-Loc ® new construction housing • Can be completely covered with insulation • Energy efficient sealed housing does not require separate ALG gasket • Air-Loc housing stops infiltration and exfiltration of air, reducing heating and cooling costs • Easy access ballast • 2 year warranty. PRODUCT SPECIFICATIONS Lamp One 26W triple tube (4-pin) CFL lamp. Socket Fixed mounted socket attaches to top of housing. Ballast 120V HPF or NPF Rapid Start Electronic with end-of-life lamp protection • Optional dimming ballast available • UL listed/ CSA certified • Mounted inside housing on a removable J-box cover for ease of maintenance. Trims Trim selection shown on reverse. Trim gasket provided with housing. Labels UL listed for through-branch wiring and damp locations • Meets Washington State Air Tight Requirements, IECC • Complies with FCC Part 18 consumer use limits • Product mechanically protected against improper use of lamps • Union made • UL and C-UL Listed • Complies with California’s Title 24 energy code • Trims 11, 12, 4101 and 4102 are wet location approved for covered ceiling applications. Testing All reports are based on published industry procedures; field performance may differ from laboratory performance. Product specifications subject to change without notice. INSTALLATION Real Nail ® 3 Bar Hangers Telescoping Real Nail ® 3 system covered under Patent D552,969 permits quick placement of housing anywhere within 24” O.C. joists or suspended ceilings • Integral T-bar notch and clip secures housing in suspended ceiling grid – no accessory clips required • 24” expansion stop allows quick placement of fixture in standard grid spacing • Bars scored in two locations for fast, clean breaking, allowing housing installation in tight applications • Bar hangers may be repositioned 90˚ • Bars captive to mounting frame • Edge-mounted for extra strength • Captive bugle-headed ring shank nail for quick one- step installation and easy removal with claw hammer for fixture relocation • Quick-Loc slot and oversized locking set screw lock fixture in position • Bar hanger foot contoured to align to bottom of construction joist • Alternate mounting holes included. Junction Box Pre-wired junction box provided with (6) 1 /2” and (1) 3 /4” knockouts, (4) Non-metallic sheathed cable connectors and ground wire, UL and C-UL Listed for through-branch wiring, maximum (6) No. 12 AWG 90˚ C branch circuit conductors (3 in, 3 out) • Junction box provided with removable access plate • Knockouts equipped with pryout slots. Mounting Frame 22-gauge die-formed galvanized steel mounting frame • Rough-in section (junction box, mounting frame, housing, ballast and bar hangers) fully assembled for ease of installation. Housing Air-Loc IC housing, .032” aluminum • Access door for junction box accessibility • Removable inner housing is vertically adjustable to accommodate up to a 1” ceiling thickness.

G5.1.31 4” VERTICAL IC COMPACT FLUORESCENT NEW Fixture ...€¦ · g5.1.31 4” vertical ic compact fluorescent new construction housing 26w compact fluorescent lamp icpl426e, icpl426en

  • Upload
    others

  • View
    6

  • Download
    0

Embed Size (px)

Citation preview

Page 1: G5.1.31 4” VERTICAL IC COMPACT FLUORESCENT NEW Fixture ...€¦ · g5.1.31 4” vertical ic compact fluorescent new construction housing 26w compact fluorescent lamp icpl426e, icpl426en

REV-7/14

DIMENSIONS

4” VERTICAL IC COMPACT FLUORESCENT NEW

CONSTRUCTION HOUSING26W COMPACT FLUORESCENT LAMP

ICPL426E, ICPL426EN

G5.1.31

Project:

Fixture Type:

Location:

Contact/Phone:

7 3/4"

9 1/8"

15 1/2"18 1/2"

13 1/2"Will expand

to 25"(Reduces to 9 1/8"

with breakawayfeature)

PRODUCT CODES

Catalog Number Input Voltage Lamp Rating (max.) Ballast

ICPL426E 120V 26W Triple Tube (4-pin) CFL HPFICPL426EN 120V 26W Triple Tube (4-pin) CFL NPFICPL426EN-DB120 120V 26W Triple Tube (4-pin) CFL NPFThis product is T24 compliant

4 1/2” CEILING CUTOUT

PRODUCT DESCRIPTIONICPL, Air-Loc® new construction housing • Can be completely covered with insulation • Energy efficient sealed housing does not require separate ALG gasket • Air-Loc housing stops infiltration and exfiltration of air, reducing heating and cooling costs • Easy access ballast • 2 year warranty.

PRODUCT SPECIFICATIONSLamp One 26W triple tube (4-pin) CFL lamp.

Socket Fixed mounted socket attaches to top of housing.

Ballast 120V HPF or NPF Rapid Start Electronic with end-of-life lamp protection • Optional dimming ballast available • UL listed/CSA certified • Mounted inside housing on a removable J-box cover for ease of maintenance.

Trims Trim selection shown on reverse. Trim gasket provided with housing.

Labels UL listed for through-branch wiring and damp locations • Meets Washington State Air Tight Requirements, IECC • Complies with FCC Part 18 consumer use limits • Product mechanically protected against improper use of lamps • Union made • UL and C-UL Listed • Complies with California’s Title 24 energy code • Trims 11, 12, 4101 and 4102 are wet location approved for covered ceiling applications.

Testing All reports are based on published industry procedures; field performance may differ from laboratory performance.

Product specifications subject to change without notice.

INSTALLATIONReal Nail® 3 Bar Hangers Telescoping Real Nail® 3 system covered under Patent D552,969 permits quick placement of housing anywhere within 24” O.C. joists or suspended ceilings • Integral T-bar notch and clip secures housing in suspended ceiling grid – no accessory clips required • 24” expansion stop allows quick placement of fixture in standard grid spacing • Bars scored in two locations for fast, clean breaking, allowing housing installation in tight applications • Bar hangers may be repositioned 90˚ • Bars captive to mounting frame • Edge-mounted for extra strength • Captive bugle-headed ring shank nail for quick one-step installation and easy removal with claw hammer for fixture relocation • Quick-Loc slot and oversized locking set screw lock fixture in position • Bar hanger foot contoured to align to bottom of construction joist • Alternate mounting holes included.

Junction Box Pre-wired junction box provided with (6) 1/2” and (1) 3/4” knockouts, (4) Non-metallic sheathed cable connectors and ground wire, UL and C-UL Listed for through-branch wiring, maximum (6) No. 12 AWG 90˚ C branch circuit conductors (3 in, 3 out) • Junction box provided with removable access plate • Knockouts equipped with pryout slots.

Mounting Frame 22-gauge die-formed galvanized steel mounting frame • Rough-in section (junction box, mounting frame, housing, ballast and bar hangers) fully assembled for ease of installation.

Housing Air-Loc IC housing, .032” aluminum • Access door for junction box accessibility • Removable inner housing is vertically adjustable to accommodate up to a 1” ceiling thickness.

Page 2: G5.1.31 4” VERTICAL IC COMPACT FLUORESCENT NEW Fixture ...€¦ · g5.1.31 4” vertical ic compact fluorescent new construction housing 26w compact fluorescent lamp icpl426e, icpl426en

G5.1.31

4” VERTICAL IC COMPACT FLUORESCENT NEW CONSTRUCTION HOUSING

26W COMPACT FLUORESCENT LAMP

ICPL426E, ICPL426EN

1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 220 Chrysler Drive • Brampton, Ontario • Canada L6S 6B6 • Phone (905) 792-7335 • Fax (905) 792-0064 Visit us at www.junolightinggroup.com Printed in U.S.A. ©2014 Juno Lighting, LLC.

ROUND TRIMS/LAMPS

Trim Size: 5” O.D. Trim Finish: ABZ - Classic Aged Bronze, BL -Black, SC - Satin Chrome, WH - White. Alzak is a registered trademark of Alcoa Corp. Note: In Canada when insulation is present, Type IC fixtures must be used.

◆ UL Listed for use in wet location.

JUNO IC housings meet IECC Energy Code requirements per ASTM E283.Air-Loc® rated trims are pre-gasketed for minimum air leakage with IC housings.

Cat. No. Description Max. Lamp Rating

4101-WH ◆ Beveled Dome Shower 26W Triple Tube 4101-SC ◆ Beveled Dome Shower (4-pin) CFL lamp 4101-ABZ ◆ Beveled Dome Shower

4102-WH ◆ Beveled Shower 26W Triple Tube 4102-SC ◆ Beveled Shower (4-pin) CFL lamp 4102-ABZ ◆ Beveled Shower

4103FROST-WH Beveled Cylinder 26W Triple Tube 4103FROST-SC Beveled Cylinder (4-pin) CFL lamp

4104HZ-SC Beveled Cone 26W Triple Tube 4104WHZ-ABZ Beveled Cone (4-pin) CFL lamp

4150MESH-SC Cylinder 26W Triple Tube (4-pin) CFL lamp

Cat. No. Description Max. Lamp Rating

11-WH ◆ Drop Opal 26W Triple Tube (4-pin) CFL lamp

13-WH 2” Pinhole with Integral Shield 26W Triple Tube (4-pin) CFL lamp

14B-WH Black Baffle 14B-SC Black Baffle 26W Triple Tube 14B-ABZ Black Baffle (4-pin) CFL lamp 14B-BL Black Baffle 14W-WH White Baffle

17CLI-WH Cone - Clear Low Iridescent Alzak® 17G-WH Cone - Gold Alzak® 17B-WH Cone - Black Alzak® 26W Triple Tube 17PT-SC Cone - Pewter Alzak® (4-pin) CFL lamp 17W-WH Cone - Gloss White 17HZ-WH Cone - Haze 17WHZ-WH Cone - Wheat Haze 17WHZ-ABZ Cone - Wheat Haze

170CLI-WH Cone - Clear Low Iridescent Alzak® 26W Triple Tube 170HZ-WH Cone - Haze (4-pin) CFL lamp 170WHZ-WH Cone - Wheat Haze Optimized for CFL

140B-WH Black Baffle 26W Triple Tube 140W-WH White Baffle (4-pin) CFL lamp Optimized for CFL

12W-WH ◆ Shower Trim, frosted perimter lens 26W Triple Tube 12W-SC ◆ Shower Trim, frosted perimter lens (4-pin) CFL lamp 12W-ABZ ◆ Shower Trim, frosted perimter lens

SQUARE TRIMS/LAMPS

Cat. No. Description Max. Lamp Rating

17SQ-HZ-WH Square Downlight 26W Triple Tube 17SQ-W-WH (4-pin) CFL lamp 17SQ-B-WH 17SQ-WHZ-WH

13SQ--WH Square Pinhole 26W Triple Tube (4-pin) CFL lamp

12SQ-W-WH ◆ Square Frosted Lens 26W Triple Tube with Clear Center (4-pin) CFL lamp