Upload
vudung
View
218
Download
0
Embed Size (px)
Citation preview
Fusion UV Systems Inc. Gaithersburg, Md.
Guspro Inc. Chatham, Ont.
Fusion UV Systems Inc. will be showing the F600S for UV-cur- able powder coating. The F600S irradiator instantly cures UV powder coatings on temperature- sensitive substrates. The first two commercially successful ultravio- let WV) powder coating pro- cesses, Baldor’s electric motor and Valeo Engine Cooling’s aluminum radiator, incorporate Fusion UV’s high-power F600S microwave- powdered ultraviolet lamps. In both applications the powder is melted and flows at about 230°F and is then UV cured without fur- ther increasing the temperature of the motor or radiator assembly. Circle 656 on the reader service card
General Fabrications Corp. Sandusky, Ohio
General Fabrications Corp. will have information available on a complete line of system compo- nents including monorail and belt spray washers, convection and in- frared ovens, conveyor systems, and environmental containment rooms. Circle 657 on the reader service card
Govesan America Corp. Woodbury, Minn.
Govesan America Corp. will fea- ture powder coatings. Circle 658 on the reader service card
Guspro Inc. will be showing the GO-Series Heat Cleaning Ovens, which are designed to clean elec- trostatic coating line components, hooks, baskets, trays, trees, line fixtures, racks, grates, hangers, and reject parts for powder coat- ing operations. The heat source of the GO-Series ovens is in the re- fractory firebox under the load cart, protecting the parts from temperature distortion. Fast- cleaning cycles assure increased productivity. A rapid-response, heavy-duty thermal oxidizer burns off hydrocarbon emissions, smoke, and odor. Circle 659 on the reader service card
Geon Formulators Group Sussex, Wis.
Geon Formulators Group excels in the custom compounding and manufacturing of PVC powder for fluid bed, electrostatic spray, slush, and rotational molding ap- plications. The powders are used to coat various metal forms as
well as mold automotive IP skins and other interior automotive parts. Fluid-bed powders are de- signed to give good edge coverage and uniform coating thickness when applied from 6 to 30 mil. For the promotion of adhesion to metal Geon has a full line of wa- ter-based and solvent-based prim- ers. Circle 660 on the reader service card
Henkel Surface Technologies Madison Heights, Mich.
Henkel Surface Technologies will present specialty chemicals, ad- hesives, and coatings used in the treatment of plastics and metal surfaces, featuring the dried-in- place posttreatment of plastics and metal surfaces. Also shown will be autophoretic chemical coatings as a primer for UV- curable powder coating applica- tions. Circle 661 on the reader service card
Herr Industrial Inc. Lancaster, Pa.
Herr Industrial Inc. provides cus- tom designs, both gas and electric infrared ovens, that increase cure-time in a fraction of the floor
26 Metal Finishing