FROM £7499 · Glass Inductor - removes direct glazed windows Bolt Inductor - releases mechanical part Hail Dent Reduction Inductor - can remove soft hail type dents Power: 2400W

GYSPRESS 8T ref: 053861• 8 tonnes• Quick arm change design• Arm rotates 360 degrees

£2802.00Reference: 053861

SPECIAL PROMO PRICE EX VAT

GYS - WHY SETTLE FOR LESS?

EQUIPMENT

Valid until 31/12/16

MIG WELDING /BRAZINGFROM £1249 EX VAT

SPOT WELDINGmeets Manufacturer & Insurer Standards

FROM £7499

DENT PULLING SYSTEMS FROM £549

• D E N T P U L L I N G • S P O T W E L D I N G • M I G W E L D I N G • B R A Z I N G • R I V E T I N G

Bodyshop @GYSLtd

EX VAT

EX VAT

GYS - WHY SETTLE FOR LESS?GYS - WHY SETTLE FOR LESS?2

POPLINER DENT PULLING SYSTEM ref: U55353

Dent pulling and straightening

• Welding of stars and washers for panel pulling• Wavy wire welding, ideal for curved surfaces• Contact shrinking, to work on light

impacts and for the highest quality finish• Able to use a graphite pencil

KIT INCLUDES:

Gyspot 2700 2600A/13A Spot Inertia Hammer Automatic Spot Accessories Trolley

£638.41

£549.00Reference: U55353


List Price Ex VAT

£2884.32

£2799.00Reference: U35044/U35043


List Price Ex VAT

SPEEDLINER PRO 230 Steel Dent Pulling Workstation Single Phase/3 Phase ref: U35044/U35043

Complete Dent Pulling Workstation for Steel Body Panels

• Automatic welding and multi tool operations

• Easy operation with microprocessor control panel

• Steel panel shrinking capabilities, slide hammer, stud welding and wavy wire welding

• Triggered gun option for precision welding

• 2m earth cable and 8m power cable

EASYLINER 39.02 Single Phase ref: U53018

The complete solution for dent pulling essential for repairing small, medium and large dents in sills, wings, doors and bonnets.

• Remove dents without disassembling

• Repair without replacing• Reduce down-time

KIT INCLUDES:Gyspot 39.02 Trolley Levelling Bar Auto gun with slide hammer Dent Box3 Phase versions also available

EASYLINER PLUS ref: U53618

As per Easyliner 39.02 with manuliner and upgraded levelling bar included.

KIT INCLUDES: Trolley Gyspot 39.02 Levelling Bar Manuliner Dent Box 3 Phase versions also available

£1375.42



List Price Ex VAT £1769.49



List Price Ex VAT

STEEL DENT PULLING

www.gys-welding.com 3

ALUMINIUM & STEEL DENT PULLING

PROLINER ALU PRO E.FV Aluminium Dent Pulling Workstation ref: U35065

SPEEDLINER COMBI 230 E.PRO Steel & Aluminium Dent Pulling Workstation ref: U35073



List Price Ex VAT

Complete dent pulling workstation for Steel and Aluminium body panels

• Automatic welding and multi tool operations• Easy operation with microprocessor

control panel• Steel panel shrinking capabilities, slide hammer, stud

welding and wavy wire welding• Triggered gun option for precision welding • 2m earth cable and 8m power cable

Dent pulling workstation for Aluminium Body Panels

• Automatic power optimisation• Max welding current of 7500A• Microprocessor control for easy operation• Digital display and adjustment • Pre-set parameters• Earth attachment for gun

KIT INCLUDES:

Gyspot Alu PO FV Aluminium hook 2 for manuliner Aluminium clamp Cable hanger for dent pulling work station 4 Aluminium hammers Manuliner Trolley

ALUMINIUM STEEL

ALUMINIUM

£4662.71


SPECIAL PROMO PRICE EX VAT£1950.00List Price Ex VAT

KIT INCLUDES: 4 & 6 Gripping multihook head Consumables box Accessory kit Levelling lever without hook Levelling bar 0.85m without hook 3 Lifting rods 150/300/500mm Inertia hammer 2 Extension joints 55mm Magnetic earth 4 Aluminium hammers Manuspot Aluminium puller Ringmatic Manuliner Trolley

T1 GYS Auto kit: Three Phase/15-200A Ref U17623

£1456.21

£1249.00SPECIAL PROMO PRICE EX VAT

List Price Ex VAT


MIG/MAG WELDING/BRAZING

M1 GYS KIT SINGLE TORCH SYSTEM Single phase ref: U32903

MIG/MAG Welding/Brazing Machine

• Perfect for Car Body Repair (including Brazing)

• Amperage range (15-160A) welding• Suitable for thin sheet welding, MIG

Brazing & aluminium welding• Synergic control offers optimal wire speed

selection• Suitable for 200mm, 300mm wire reels• Available in single phase or three phase

KIT INCLUDES:

3m Euro torch 0 0.8 mm 5kg Steel MIG wire 1 x regulator 35L/min Earth clamp Consumables box

SINGLE TORCH SYSTEM

£1390.00



List Price Ex VAT

THREE PHASE VERSION

T3 AUTO kit: Three Phase/15-200ARef U17211

M3 GYS AUTO TRIPLE TORCH SYSTEM Single phase ref: U32880

1

2

3

X3 TORCH SYSTEM

£2768.56



List Price Ex VAT

£2887.74

£2599.00SPECIAL PROMO PRICE EX VAT

List Price Ex VAT


MIG/MAG WELDING/BRAZING

MIG/MAG Welding/Brazing Machine

• Perfect for Car Body Repair (including Brazing)

• 3 torch system enables instantaneous switching between use in Steel, Aluminium or Brazing, saving time on the repair process

• Suitable for thin sheet welding, MIG Brazing & aluminium welding

• Synergic control offers optimal wire speed selection

• Suitable for 100mm (1kg), 200mm (5kg) and 300mm (15kg) diameter reels

• Available in single phase or three phase

KIT INCLUDES: 2x 3m Euro torch 1x Spool gun for Aluminium 2x regulators 35L/min Automatic welding helmet 0.5kg Aluminium AlSi5 wire Wire reel adaptor 5kg Steel MIG wire 5kg CuSi 3 Brazing wire Adaptor 5kg wire reels Consumables box

THREE PHASE VERSION

Bolt Induc tor


INDUCTION HEATING

GYSDUCTION AUTO

A powerful instantaneous induction heater. Designed specifically for car body repair. Gysduction is supplied as a powerful generator and accessories of your choice (see table below)Modular systemBody Inductor - removes adhesives, logos, side mouldings.Glass Inductor - removes direct glazed windows Bolt Inductor - releases mechanical part Hail Dent Reduction Inductor - can remove soft hail type dents

Power: 2400WInstant heating, no flame.Only heats metal parts with accuracy whilst protecting the adjacent parts (no need to remove engine parts).Remove parts without using solvent.

Plastic Wedge Remote Control

Hail Dent Reduc tion Induc torGlass Induc tor

Body Induc tor

PRODUCT REFERENCE GYSDUCTION AUTO GENERATOR

PLASTIC WEDGE

GLASS INDUCTOR

BODY INDUCTOR

BOLT INDUCTOR

DENT INDUCTOR

REMOTE CONTROL

TROLLEY SPOT 800

CABLE SUPPORT PRICE

PROLINER GYSDUCTION AUTO 048775 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ £1899.00

GYSDUCTION AUTO COMPLETE 053380 ✓ ✓ ✓ ✓ ✓ ✓ £1697.00

GYSDUCTION AUTO MECA 048812 ✓ ✓ ✓ £1349.00

GYSDUCTION AUTO GLASS 048805 ✓ ✓ ✓ £1349.00

GYSDUCTION AUTO BODY SHOP 048799 ✓ ✓ ✓ ✓ ✓ ✓ £1548.00

GYSDUCTION AUTO PDR 054981 ✓ ✓ £1349.00

SPOTLIFT ref: 052864

• Lifts vehicles up to 2.5 tonnes• Lifts front or back of vehicle up to 1.5m• Use two lifts to raise entire vehicle• Max vehicle height 60cm• Min vehicle height 14cm• Fully pneumatic - no electric supply needed• Directional wheels• Articulated arm• 140 x 55 x 14/120kg

£1835.00

£1599.00Reference: 053557


List Price Ex VAT

£1578.00

£1349.00Reference: 052864


List Price Ex VAT


LIFTING

• Lifts vehicles up to 2.5 tonnes to a height of 70cm

• Hydro-pneumatic pump• Forks for lifting - no electric supply needed• Base wheels for easy movement• Features handle and trigger guard• WxHxD: 129x105x73cm/85kg

SPOTLIFT PRO ref: 053557

SPOT WELDING

PORTASPOT 230 ref: 022256

£749.00Reference: 022256


240VSingle phaseIdeal for thin steel sheets 2mm + 2mmContinuous or pulse spot weldingClamping force 30daN - 120daNThermal protectionDelivered with PX1 arms as shown 10kg

GYSPOT 32 DX ref: 019881

Three phase X clamp spot welderClamping force upto 500daNWelding current 7,500ASingle sided spot gun for dent pulling and spot welding2.5m cableCable support bracket

£4020.00Reference: 019881



Meets manufacturer & insurer standardsFully automatic mode GYS EDC systemEquipped with C-gun500 daN pressureMax welding current 13000ATraceability - SD card for recording spot welding historySingle spot gun for dent pulling and spot welding

£12651.38



List Price Ex VAT

GYSPOT BP-LC-S7 C CLAMP SPOT WELDER ref: U19640

KIT INCLUDES:5 x C Arms (C1,C2,C3, C4, C6) Accessory kit for Spotter 12 x round caps (6 x A Type /6 x F Type) Cap removing wrench Tube of contact grease Inertia short hammer Monopoint electrode for the gun, with 1 cap type F 10L Special welding liquid cooling 20L De-ionized water Protective cover

C CLAMP5 C Arms included

SPOT WELDING

BODYPROTECT - Fully compliant with EU EMF standardsMeets manufacturer & insurer standardsMax welding current 13,000A550DanSingle sided gun for dent pulling & weldingTraceability - SD card for recording spot welding history

INCLUDED:

£9337.61



List Price Ex VAT

KIT INCLUDES:Set of 6 arms (X4A (2), X4B, X4C, X2 (2))Accessory kit for Spotter2 x Bronze x 1 arms - LG120mm with 2 caps12 x Round Caps (6 x A Type /6 x F Type)Cap Removing Wrench 6 x Bevelled Caps Tube of Contact Grease2x Bronze inclined arms - LG220mm with 2 bevelled capsInertia short hammer Monopoint electrode for the gun, with 1 cap type F10L Special welding liquid cooling 20L De-ionized water


GYSPOT INVERTER BP-LX X CLAMP SPOT WELDER 13,000A 3 Phase Spot Welder ref: U19638

X CLAMP

6 X Arms included

GYSPOT INVERTER EVOLUTION PTI-s7 C CLAMP SPOT WELDER 14,500A 3 Phase Spot Welder ref: U19644

Complete Dent Pulling Workstation for Steel Body Panels

Specifically approved by Ford, GM and Mercedes, meets other manufacturer & insurer standards• Fully Automatic - no user input required • Max welding current of 14,500A• Traceability - SD card for recording spot welding

history• 550 daN of tip pressure• Optional 6m cable

£11,963.88



List Price Ex VAT

GYSPOT INVERTER BP-LCX-s7 13,000A 3 Phase Spot Welder ref: U19643

£14142.16

£10999.00Reference: U19643


List Price Ex VAT

Meets manufacturer & insurer standardsFully Automatic - no user input requiredBODYPROTECT - Fully compliant with EU EMF standardsSingle sided gun for dent pulling and weldingMax welding current 13,000ASD card processing - Storage of spot welding history Comes with 4 C arms and 2 X arms

SPOT WELDING

INCLUDED:

X & C CLAMP

KIT INCLUDES:5 x C Arms (C1,C2,C3, C4 & C6) Protective Cover Accessory kit for Spotter 10L of Special Welding Liquid 12 x Round Caps (6 x A Type /6 x F Type) Cap removing Wrench 20L De-ionised Water

KIT INCLUDES:4 x C Arms (C1,C2,C3, C4) 2 x X Arms Protective CoverAccessory kit for Spotter12 x Round Caps (6 x A Type /6 x F Type)6 x Bevelled Caps Cap removing WrenchInertia short hammerMonopoint electrode10L Special welding liquid cooling20L De-ionised Water

10 GYS - WHY SETTLE FOR LESS?

C CLAMP

INCLUDED:

4 C Arms & 2 X Armsincluded

5 C Arms included

HR3053885

PRESSURE CONTROL

SPEED CONTROL

DISCHARGE LEVER

OPTIONAL ADDITIONS

GYSPRESS STAND OPTIONAL ARMS

HR2053878

WORKSTATION

Meets manufacturer & insurer standardsFully Automatic - no user input requiredBODYPROTECT - Fully compliant with EU EMF standardsSingle sided gun for dent pulling and weldingMax welding current 13,000ASD card processing - Storage of spot welding history Comes with 4 C arms and 2 X arms


RIVETING SYSTEM

GYSPRESS 8T ref: 053861

Maximum pressure of 8 tonnes with integrated pressure gauge.

• Fast and easy arm change.

• C-arm swivels 360° around the riveting machine axle.

• Selection of arms available for difficult access situations.

• Easy to use ergonomic handle and trigger.

• Magnetic die makes rivet positioning easy.

KIT INCLUDES:2 die keys Strap HR1S arm Handle for arm 1 box of rivets Standard die kit for extraction and rivet positioning Centre punch Carry case

£2802.00Reference: 053861


BATTERY CHARGING

GYS - WHY SETTLE FOR LESS?12

Distributed by

£479.00EX VAT

Unit 3Great Central Way Rugby CV21 3XHEmail: [email protected]: www.gys-welding.com

E & O.E Prices until 31.12.2016. All prices ex VAT

STARTIUM 480E ADVANCED STARTER CHARGER ref: 026483

Startium is a revolution in products of its type - the Startium uniquely offers the charging functionality of the Batium chargers, combined with the convenience of a powerful starter with the safety features needed for modern vehicles. A complex product that is designed to solve all charging and starting problems in one simple to use unit.

The Startium offers:

• Protection for vehicle electronics• SOS recovery (sulphated battery recovery)• Auto Start - current will be activated when the ignition is switched on• Charges deeply discharged batteries as low as 1V• Alternator test function

THE GYS - - TESTPASSED

DOES YOUR EQUIPMENT PASS THE TEST?

SAFETY Does it provide protection for the vehicle’s electronics?

ALL BATTERY TYPESIs it compatible with all battery types?

UNIVERSAL MODEIs it safe to charge when the battery type is unknown?

Documents

FROM £7499 · Glass Inductor - removes direct glazed windows Bolt Inductor - releases mechanical part Hail Dent Reduction Inductor - can remove soft hail type dents Power: 2400W