Upload
others
View
24
Download
2
Embed Size (px)
Citation preview
100
Framed formwork Alu-Framax Xlife | Framed formwork | Doka Wall Systems
Alu-Framax Xlife framed formwork is a complete system that
includes high-performing safety and workplace accessories.
Its lightweight panels can also be set up by hand, and fi t into
the logical grid of the Framax Xlife system.
Detached home in Weyregg, AustriaContractors: Redl
Framed formwork Alu-Framax XlifeThe crane-independent variant of Framax Xlife
101
Doka Wall Systems | Framed formwork | Framed formwork Alu-Framax Xlife
Framed form
work Alu-Framax Xlife
Form economically with no need for a crane
With its low weight, Alu-Framax Xlife brings all the benefi ts of Framax Xlife framed formwork to craneless jobsites as well – also seamlessly combined with Framax Xlife, of course.
Extra light and super-strongwith torsion-proof hollow aluminium profi les
Framed formwork Alu-Framax Xlife
delivers fl at, plane concrete faces thanks to its sturdy aluminium frames•
can be repositioned quickly, with or without crane assistance•
Reduced close-out coststhanks to superior product quality
Extremely long service life is ensured by
the plastic-coated Xlife sheet•
the rugged, powder-coated aluminium frame•
Easy handling and planningthanks to the logical system-grid
The 15 cm grid, with only 5 diJ erent widths of panel, results in
optimum adaptability to every layout•
easy planning and logistics•
a neat joint pattern•
Alu-Framax Xlife and Framax Xlife are fully compatibleAll accessories fi t both systems
Optimise your site
by dividing it up into man-handled and crane-handled zones•
with simplifi ed site logistics•
High safetyfor your site
The accident risk is reduced, and legally compliant working conditions are ensured, by
the safe ladderways of the Ladder system XS•
combining the formwork with the Platform system Xsafe•
15 cm grid
Permissible fresh-concrete pressure 60 kN/m²
Xlife sheet
Lightweight aluminium
102
Framed formwork Alu-Framax Xlife | Framed formwork | Doka Wall Systems
System
Alu-Framax Xlife
Ingeniously co-ordinated panel formats for maximising • utilisation of the formwork
15 cm grid, with only fi ve widths and two heights, simplifi es • planning, forming and logistics on the site
The high-grade powder-coating on the Alu-Framax Xlife • panels reliably prevents concrete adhesion
Integrated waling system: the connection profi les make it • easy to attach accessories – with no obligatory fi xing points
Framax Xlife sheet
Extremely high numbers of re-use cycles with superla-• tive concreting results, for unparalleled cost eV ciency and fewer changes of form-facing
No burst-oJ plywood chips, and less water absorbed • through nail-holes, for longer service life
Special surface structure for less touching-up and reduced • close-out costs
Timber-plastic composite sheet that can also be cleaned • using a high-pressure washer
Alu-Framax palletsThe practical Alu-Framax pallets make light work of oL oading
the panels at the site.
30 45 60 75 90270
90
103
Doka Wall Systems | Framed formwork | Framed formwork Alu-Framax Xlife
Framed form
work Alu-Framax Xlife
Framax circular forming plateBy combining Framax circular
forming plates and Alu-Framax
Xlife panels, it is possible to
form polygonal curves.
Combining with Framax XlifeCombining Framax Xlife with Alu-Framax Xlife makes it possible
to divide up the site into crane-handled and man-handled zones,
making for more fl exible logistics and a faster workfl ow on the site.
Universal panelThe Alu-Framax Xlife system also has a universal panel: with a
width of 75cm, this is ideal for columns, stop-ends and corners.