Upload
vuthuan
View
221
Download
0
Embed Size (px)
Citation preview
Framed Art by Kris McIntosh, www.stampingwithkris.com Page 1
Framed Art
Merry & Bright Panel
Step 1
Punch along one short edge of Whisper White card
9.5cm x 11.3cm using the Confetti Stars Border
Punch.
Step 1
Step 2
Attach the punched Whisper White card to Real
Red card 10cm x 11.8cm.
Step 2
Step 3
Cut the word “merry” from Mossy Meadow card.
Step 3
Step 4
Attach the word to the punched Whisper White
card.
Framed Art by Kris McIntosh, www.stampingwithkris.com Page 2
Step 4
Step 5
Stamp “& bright” using Real Red ink.
Step 5
Christmas Tree Panel
Step 1
Emboss Whisper White card 9.5cm x 16.5cm using
the Stylish Stripes Embossing Folder.
Step 1
Step 2
Attach the embossed Whisper White card to Mossy
Meadow card 10cm x 17cm.
Step 2
Step 3
Cut out the section of Curvy Keepsakes Box which
has the long narrow end from Early Expresso card.
Step 3
Step 4
Trim off any of the outside piece along the score
line. See photo.
Step 4
Step 5
Trim down the bottom section of the box where it
has one round corner to 3cm.
Step 5
Framed Art by Kris McIntosh, www.stampingwithkris.com Page 3
Step 6
Attach the “tree base” to the centre of the
embossed Whisper White card.
Step 6
Step 7
Punch out 9 clouds from Mossy Meadow card
using the Tree Builder Punch.
Step 7
Step 8
Sponge around all the edges of each cloud using
Mossy Meadow ink making sure that you sponge
them all on the same side.
Step 8
Step 9
Attach the clouds over the Curvy Keepsake base –
first row; two clouds,
second row; one cloud,
third row; two clouds,
fourth row; one cloud,
fifth row; two clouds,
sixth row; one cloud. Make sure that each time
you have a row of 2 clouds, that the width is
slightly decreased. Make sure to cover the Curvy
Framed Art by Kris McIntosh, www.stampingwithkris.com Page 4
Keepsake base, so that no brown shows through
the clouds.
Step 9
Step 10
Cut a star from Gold Glimmer Paper using the star
framelit from the Circle Card Die.
Step 10
Step 11
Attach the star to the top of the tree.
Step 11
Step 12
Use the smallest Square Framelit Die to cut Real
Red, Smoky Slate and Old Olive card.
Step 12
Step 13
Cut a bow from each of the three colours.
Step 13
Step 14
Attach the Smoky Slate bow to the Real Red
square. Attach the Old Olive bow to the Smoky
Slate square. Attach the Real Red bow to the Old
Olive square.
Step 14
Step 15
Attach the Smoky Slate square to the bottom of the
tree on the right hand side. Attach the Old Olive
square to the bottom of the tree on the left hand
side.
Step 15
Step 16
Attach the Real Red square to the centre of the
tree using dimensionals.
Step 16
Framed Art by Kris McIntosh, www.stampingwithkris.com Page 5
Step 17
Punch 9 circles from Gold Glimmer Paper using the
2nd largest circles on the Bird Builder Punch. Attach
to the tree using Glue Dots.
Step 17
Christmas Bauble Panel
Step 1
Cut one each of the intricate baubles from Red
Foil. You may need an extra shim to make sure the
framelits cut through this card as it is a little
thicker.
Sep 1
Step 2
Cut two bauble hangers from Gold Foil.
Step 2
Step 3
Using the two shortest lengths of Gold Cording
Trim, tie one piece through each of the bauble
hangers.
Step 3
Step 4
Trim off the excess Cording Trim and attach the
bauble hanger with the shortest length of Cording
Trim to the longer narrower ornament. Attach the
bauble hander with the longer length of Cording
Trim to the shorter wider ornament.
Step 4
Step 5
Attach the Baubles to Whisper White card 9.5cm x
16.5cm.
Framed Art by Kris McIntosh, www.stampingwithkris.com Page 6
Step 5
Step 6
Attach the Whisper White card to Mossy Meadow
card 10cm x 17cm, making sure that the ends of
the Cording Trim are secured at the back. See
photo.
Step 6
Step 7
Tie the two remaining pieces of Cording Trim into
bows and attach over the top of the knot on the
Bauble Hanger for each ornament.
Step 7
Santa in the Sky panel
Step 1
Cut the trees from the top section of Old Olive card
9.5cm x 8cm.
Step 1
Step 2
Attach to the bottom of Whisper White card 9.5cm
x 11.3cm.
Step 2
Step 3
Cut the houses from Smoky Slate card 9.5cm x 5m.
Step 3
Framed Art by Kris McIntosh, www.stampingwithkris.com Page 7
Step 4
Attach the houses over the top of the Old Olive
trees making sure that they are aligned at the
bottom.
Step 4
Step 5
Cut the horse and sleigh from Smoky Slate card
7cm x 3.5cm.
Step 5
Step 6
Cut the excess card away from the horse and
sleigh. See photo.
Step 6
Step 7
Attach horse and sleigh above the trees.
Step 7
Step 8
Attach the Whisper White panel to Real Red card
10cm x 11.8cm.
Step 8
Assembling your Framed Art.
Step 1
Attach the Merry & Bright panel to the top left
hand corner of thick A4 Whisper White card.
Step 1
Step 2
Attach the Christmas Tree Panel to the lower left
hand corner of the thick A4 Whisper White card.
Step 2
Framed Art by Kris McIntosh, www.stampingwithkris.com Page 8
Step 3
Attach the Christmas Baubles to the top right hand
corner of the thick A4 Whisper White card.
Step 3
Step 4
Attach the Santa Sleigh panel to the lower right
hand corner of the thick A4 Whisper White card.
Step 4
Step 5
Place into frame of your choice when you get
home.
I hope you have enjoyed making your Framed Art piece today. If you made one last year you can now update
your frame for this year or by a new frame and have two Framed Art pieces. I hope that you find the
instructions useful in the future.
Kris Kristine McIntosh Independent Stampin' Up! Demonstrator Brisbane, Australia 0429668535 [email protected] Blog: www.stampingwithkris.com Web: www.krismcintosh.stampinup.net Facebook: http://www.facebook.com/pages/Stamping-With-Kris/187579114586591