Upload
aliali
View
215
Download
2
Embed Size (px)
DESCRIPTION
FPSNE-100
Citation preview
Baker Oil Tools PRODUCT REPORTPRODUCT REPORT
2001 Baker Hughes Incorporated. All rights reserved. PR/SCS/12-01
NE-100Emulsion Preventing SurfactantProduct Family No. H490390100
DESCRIPTION/APPLICATION:NE-100 is a very effective frac fluid and acid nonemulsifier. Prevents emulsion formation in most crudes up to 380F (193C). The addition of NE-100 leads to increased effectiveness of stimulation and workover fluids, and helps eliminate formation damage due emulsion blocks. It can be used in both sandstone and carbonate reservoirs, and is compatible with amphoteric, cationic, and anionic additives.
FEATURES/BENEFITS: Highly effective emulsion preventing surface active agent Clear nonionic surfactant Can be used in brines and acids Applicable in a wide ranges of fluids Prevents emulsions in most crude/condensate wells Very cost effective
APPLICATION AND DOSAGE:The recommended dosage for NE-100 is 0.1 to 0.7% by volume in brines, acids, and fracturing fluids. NE-100 may be added in batch mix or on the fly applications. NE-100 is compatible with most emulsion preventing and preferential wetting surfactants, as well as clay stabilizers and mutual solvents.
AVAILABILITY:NE-100 is available in 55 gallon (208.2 liter) nonreturnable drums.SHIPPING AND HANDLING:NE-100 Nonemulsifying Surfactant is incompatible with strong oxidizing agents. A Material Safety Data Sheet outlining recommended safe handling of NE-100 is available upon request, or will be forwarded upon the purchase of NE-100.
SPECIFICATIONS: Form @ 70F (21C) Amber Liquid
Density @ 60 F (16C) 7.4 lb/gal (0.887 g/ml)Flash Point, TCC >100F (>38C)
Boiling Point 153F (67C)pH NA
Charge NonionicWetting Tendency on Sandstone Water wetsWetting Tendency on Limestone Water wets
Solubility in water, acid, and brine Soluble
December 2001 SAND CONTROL SYSTEMSFluid Pumping Services
Main MenuProduct Catalog MenuProduct Report MenuFluid Pumping Services Product Reports
Tech Facts