Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
For sa
les us
e only
Not for crane operations
N3P01381 of 244HTC---8690
SERIAL NUMBER:
CRANE RATINGMANUAL
HTC---86905---Section Boom
For Replacement, Order Part Number: N3P0137
(012805)
R Link-Belt is a registered trademark.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
For sa
les us
e only
Not for crane operations
N3P0138 2 of 244 HTC---8690
Table Of ContentsPage Contents3---4 Operating Instructions4 Patent Information5 General Dimensions5 Tire Inflation5 Pontoon Loadings6 Boom Extend Modes7 Boom Mode Performance --- General Reference Guide8 Winch Performance8 Wire Rope Capacity Chart8 Hydraulic Circuit Pressure Settings9 Working Areas9 Capacity Deductions10 Allowable Crane Configuration --- Main Boom10 Wind Speed Restrictions11 Allowable Crane Configuration --- Main Boom + Attachments11 Backward Stability --- Maximum Boom Angle12 Working Range Diagram
Tab 1 Fully Extended Outriggers13---18 Lifting Capacities, 0 lb CTWT19---24 Lifting Capacities, 2,500 lb CTWT25---32 Lifting Capacities, 5,500 lb CTWT33---40 Lifting Capacities, 8,500 lb CTWT41---50 Lifting Capacities, 11,500 lb CTWT51---62 Lifting Capacities, 14,500 lb CTWT63---74 Lifting Capacities, 17,500 lb CTWT75---86 Lifting Capacities, 20,500 lb CTWT87---98 Lifting Capacities, 23,500 lb CTWT99---110 Lifting Capacities, 26,500 lb CTWT111---122 Lifting Capacities, 29,500 lb CTWT123---134 Lifting Capacities, 32,500 lb CTWT135---146 Lifting Capacities, 39,500 lb CTWT
Tab 2 Intermediate Extended Outriggers147---150 Lifting Capacities, 0 lb CTWT151---154 Lifting Capacities, 2,500 lb CTWT155---158 Lifting Capacities, 5,500 lb CTWT159---162 Lifting Capacities, 8,500 lb CTWT163---166 Lifting Capacities, 11,500 lb CTWT167---170 Lifting Capacities, 14,500 lb CTWT171---174 Lifting Capacities, 17,500 lb CTWT175---178 Lifting Capacities, 20,500 lb CTWT179---182 Lifting Capacities, 23,500 lb CTWT183---188 Lifting Capacities, 26,500 lb CTWT189---196 Lifting Capacities, 29,500 lb CTWT197---204 Lifting Capacities, 32,500 lb CTWT205---212 Lifting Capacities, 39,500 lb CTWT
Tab 3 Fully Retracted Outriggers213---214 Lifting Capacities, 2,500 lb CTWT215---216 Lifting Capacities, 5,500 lb CTWT217---218 Lifting Capacities, 8,500 lb CTWT219---220 Lifting Capacities, 11,500 lb CTWT
Tab 4 On Tires221---222 Lifting Capacities, 0 lb CTWT223---224 Lifting Capacities, 2,500 lb CTWT225---226 Lifting Capacities, 5,500 lb CTWT227---228 Lifting Capacities, 8,500 lb CTWT229---230 Lifting Capacities, 11,500 lb CTWT231---232 Lifting Capacities, 14,500 lb CTWT233---234 Lifting Capacities, 17,500 lb CTWT235---236 Lifting Capacities, 20,500 lb CTWT237---238 Lifting Capacities, 23,500 lb CTWT239---240 Lifting Capacities, 26,500 lb CTWT241---242 Lifting Capacities, 29,500 lb CTWT243---244 Lifting Capacities, 32,500 lb CTWT
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
For sa
les us
e only
Not for crane operations
N3P01383 of 244HTC---8690
WARNINGREAD AND UNDERSTAND THE OPERATORS AND SAFETY MANUALS AND THE
FOLLOWING INSTRUCTIONS AND RATED LIFTING CAPACITIES BEFORE OPERATING
THE CRANE. OPERATION WHICH DOES NOT FOLLOW THESE INSTRUCTIONS MAY
RESULT IN AN ACCIDENT.
Operating InstructionsGeneral:1. Rated lifting capacities in pounds as shown on lift
charts pertain to this crane as originallymanufactured and normally equipped.Modifications to the crane or use of optionalequipment other than that specified can result in a
reduction in capacity.2. Construction equipment can be dangerous if
improperly operated or maintained. Operation and
maintenance of this crane must be in compliancewith the information in the Operator’s, Parts, andSafety Manuals supplied with this crane. If these
manuals are missing, order replacements throughthe distributor.
3. The operator and other personnel associated with
this crane shall read and fully understand the latestapplicable American National Standards ASME
B30.5 safety standards for cranes.4. The rated lifting capacities are based on crane
standing level on firm supporting surface.
Set Up:1. The crane shall be leveled on a firm supporting
surface. Depending on the nature of the supporting
surface, it may be necessary to have structuralsupports under the outrigger pontoons or tires tospread the load to a larger bearing surface.
2. When making lifts on outriggers, all tires must befree of supporting surface. All outrigger beamsmust be extended to the same length; fully
retracted, intermediate extended, or fully extended.The front bumper outrigger must be properly
extended.3. When making lifts on tires, they must be inflated to
the recommended pressure. (See Tire Inflation.)
4. When on tires or retracted outriggers, with counter-weight combinations of 20,500 lb or less, maintain40û boom angle with fully retracted boom beforeswinging to over side position. Do not swing to overside position with counterweight combinations over
20,500 lb unless boom angle is less than maximumboom angle shown on Backward Stability chart.When on tires, do not swing to over side position with
counterweight combinations 32,500 lb and 39,500lb.
5. For required parts of line, see Wire Rope Capacity
Chart and Winch Performance.6. Before setting up the crane, refer to Allowable
Crane Configuration and rated lifting capacities todetermine allowable crane configurations.
Operation:1. Rated lifting capacities at rated radius shall not be
exceeded. Do not tip the crane to determineallowable loads.
2. Rated lifting capacities shall be reduced for
repetitive lift applications. For concrete bucketoperation, weight of bucket and load shall not
exceed 80% of rated load. For duty cycleoperation, such as loading and unloading,maximum allowable load shall not exceed 70% of
rated load. For clamshell and magnet operation,weight of bucket, or magnet, and load shall notexceed 70% of rated load. Lifts with fly erected are
prohibited for clamshell and magnet operation.3. Rated lifting capacities shown on fully extended
outriggers do not exceed 85% of the tipping loads.Rated lifting capacities shown on intermediateextended or fully retracted outriggers aredetermined by the formula, rated load = (tippingload --- 0.1 X load factor)/1.25. Rated liftingcapacities shown on tires do not exceed 75% of thetipping loads. Tipping loads are determined bySAE crane stability test code J---765.
4. Rated lifting capacities in the shaded areas arebased on structural strength or hydrauliclimitations and have been tested to meetminimum requirements of SAE J---1063cantilevered boom crane structures --- methodof test. Rated lifting capacities in non---shadedareas are based on stability ratings.
5. Rated lifting capacities include the weight of thehook block, hook ball, slings, bucket, magnet,auxiliary lifting devices, etc. Their weights must besubtracted from the listed rated capacity to obtainthe net load which can be lifted. Rated liftingcapacities include the deduct for either fly stowedon the base of the boom. For deducts of any flyerected, but not used, see Capacity Deductions.
6. Rated lifting capacities are based on freelysuspended loads. No attempt shall be made to
move a load horizontally on the ground in anydirection.
7. Rated lifting capacities are for lift crane service only.8. Do not operate at radii or boom lengths (minimum
or maximum) where capacities are not listed. At
these positions, the crane can tip or cause boomfailure.
9. The maximum loads which can be telescoped are
not definable because of variation in loadings andcrane maintenance, but it is permissible to attempt
retraction and extension within the limits of theapplicable load rating chart.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
For sa
les us
e only
Not for crane operations
N3P0138 4 of 244 HTC---8690
10. Boom extend mode EM5 is a fixed boom length
load rating chart. Rated lifting capacities are basedon sections pinned together. When in EM5, do not
attempt to extend or retract loads greater than10,000 lb unless sections are pinned.
11. For main boom capacities when either boom length
or radius, or both are between values listed,proceed as follows:a. For boom lengths not listed, use rating for next
longer boom length or next shorter boomlength, whichever is smaller.
b. For load radii not listed, use rating for next larg-er radius.
12. The user shall operate at reduced ratings to allow
for adverse job conditions such as: soft or unevenground, out of level conditions, wind, side loads,pendulum action, jerking or sudden stopping of
loads, hazardous conditions, experience ofpersonnel, traveling with loads, electrical wires, etc.
Side load on boom or fly is dangerous and shall beavoided.
13. Rated lifting capacities do not account for the
effects of wind on a suspended load or boom.Lifting capacities should be considered acceptablefor wind speeds up to 20 mph and appropriately
reduced for wind speeds greater than 20 mph. (SeeWind Speed Restrictions.)
14. For cold weather operation, rated capacities shouldbe reduced by the following rule: a 1% reduction inrated capacity should be taken for each 1_F below
0_F. Example: if the temperature is ---10_F a 10%reduction in rated capacities should be taken, at---40_F a 40% reduction.
15. For auxiliary lifting sheave capacities, use mainboom charts minus auxiliary lifting sheave deduct.
(See Capacity Deductions.) The effective length ofthe boom increases by 2 ft.
16. Rated lifting capacities are based on correct
reeving. Deduction must be made for excessivereeving. Any reeving over minimum required isconsidered excessive and must be accounted for
when making lifts. Use Working Range Diagram toestimate the extra feet of rope, then deduct the
required rope weight (listed on the Wire RopeCapactiy Chart) for each extra foot of wire ropebefore attempting to lift a load.
17. The loaded boom angle combined with the boomlength give only an approximation of the operating
radius. The boom angle, before loading, should begreater to account for deflection. Some capacitiesare limited by a maximum obtainable 80_ boom
angle. For main boom capacities, the loaded boomangle is for reference only. For fly capacities, theload radius is for reference only.
18. For fly capacities with main boom length less than
fully extended, the rated capacities are determinedby the boom angle. For angles not shown use the
next lower boom angle to determine the ratedcapacity.
19. The 38 ft boom length structural lifting capacities
are based on boom fully retracted. If the boom isnot fully retracted, do not exceed capacities shownfor the 50 ft boom length.
20. Rated lifting capacities on tires depend on tirecapacity, condition of tires, and tire air pressure. On
tire capacities require lifting from main boom headonly on a smooth and level surface. The boom mustbe centered over the rear of the crane with two
position travel swing lock engaged and the loadmust be restrained from swinging. Pick and carryoperations are restricted to maximum speed of 1
mph. For correct tire pressure, see Tire Inflation.21. When operating with the 3,000 lb pin---on
counterweight, use the rated lifting capacities for2,500 lb counterweight.
Definitions:1. Loaded Boom Angle In Degrees: (
The angle
between the boom base section and horizontal with
freely suspended load at the rated radius.2. Load Radius: Horizontal distance from a projection
of the axis of rotation to the supporting surface,
before loading, to the center of the vertical hoist lineor tackle with load applied.
3. Working Area: Area measured in a circular arc
about the centerline of rotation as shown on theWorking Areas Diagram.
4. Freely Suspended Load: Load hanging free with nodirect external force applied except by the hoist line.
5. Side Load: Horizontal side force applied to the
lifted load either on the ground or in the air.6. No Load Stability Limit: The radius or boom angle
beyond which it is not permitted to position the
boom because the crane can overturn without anyload on the hook.
7. Load Factor: Load applied at the boom tip whichgives the same moment effect as the boom mass.
Patents:1. This crane is covered by one or more of the
following patents:
6,131,750 6,357,773
6,499,612 6,601,719
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
For sa
les us
e only
Not for crane operations
N3P01385 of 244HTC---8690
General Dimensions
10’ 11”(3.33m)
7”(17.78cm)
17û
7’ 0”(2.13m)
38’ 0”(11.58m)
45’ 7”(13.89m)
CL Of Rotation
9’ 6”(2.90m)
11’ 0”(3.35m)
14’ 8”(4.47m)
10.75”(0.27m)Ground
Clearance
5’ 9”(1.75m)
34”(0.86m)
16û
6’ 2.50”(1.89m)
11’ 6.50”(3.52m)
5’ 0”(1.52m)
4’ 2”(1.27m)
8’ 0.50”(2.44m)
4.50”(114mm)
5’ 1”(1.55m)
7’ 9” (2.36m)Fully Retracted
9’ 8” (2.95m)Fully Retracted
14’ 7” (4.45m)Intermediate Extended
16’ 7” (5.05m)Intermediate Extended
24’ 0” (7.32m)Fully Extended
26’ 0” (7.92m)Fully Extended
22.75”(0.58m)
Ground LevelWith CraneOn Outriggers
8.50”(0.22m)
14.25”(0.36m)
14.25”(0.36m)
13’---8” (4.17m) Tailswing
8’ 6” (2.60m)Overall Width
5’ 1.50”(1.56m)
Tire InflationTire Size Operation Tire Pressure (psi)
12 R 22.51 mph
Stationary120120
Pontoon LoadingsMaximum Pontoon Load (lb) Maximum Pontoon Ground Bearing Pressure (psi)
Front --- 97,400 199
Rear --- 106,000 217
Bumper --- 51,000 262
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
For sa
les us
e only
Not for crane operations
N3P0138 6 of 244 HTC---8690
Boom Extend Modes
BoomLength
Boom Telescope Length (ft)Length
(ft) T4 T3 T2 T1 38 ft (11.6m)50 12.0
38 ft (11.6m)
60 22.0 Extend Base70 24.2 7.8
Extend Base
80 24.2 17.8140 ft (42 7m)90 24.2 25.1 2.7 140 ft (42.7m)
100 24.2 25.1 12.7 BaseT4 T3 T2 T1110 24.2 25.1 22.7
BaseT4 T3 T2 T1
120 24.2 25.1 25.9 6.8
130 24.2 25.1 25.9 16.8
140 24.2 25.1 25.9 26.8
BoomLength
Boom Telescope Length (ft)
38 ft (11 6 )Length
(ft) T4 T3 T2 T138 ft (11.6m)
50 11.5 0.5 Extend Base60 11.5 10.5
Extend Base
70 11.5 20.5127 3 ft (38 8 )80 11.5 25.1 5.4 127.3 ft (38.8m)
90 11.5 25.1 15.4 BaseT4 T3 T2 T1100 11.5 25.1 25.4
BaseT4 T3 T2 T1
110 11.5 25.1 25.9 9.5
120 11.5 25.1 25.9 19.5
127.3 11.5 25.1 25.9 26.8
BoomLength
Boom Telescope Length (ft)38 ft (11 6m)Length
(ft) T4 T3 T2 T1
E d B
38 ft (11.6m)
50 12.0 Extend Base
60 22.0
70 25.1 6.9 115.8 ft (35.3m)80 25.1 16.9
115.8 ft (35.3m)
90 25.1 25.9 1.0 BaseT3 T2 T1100 25.1 25.9 11.0
BaseT3 T2 T1
115.8 25.1 25.9 26.8
BoomLength
Boom Telescope Length (ft)38 ft (11.6m)Length
(ft) T4 T3 T2 T1Extend Base
38 ft (11.6m)
50 11.5 0.5Extend Base
60 11.5 10.5102 ft (31 1m)
70 11.5 12.7 7.8102 ft (31.1m)
80 11.5 12.7 13.0 4.8T4 T3 BaseT2 T1
90 11.5 12.7 13.0 14.8T4 T3 BaseT2 T1
102 11.5 12.7 13.0 26.8
BoomLength
Boom Fixed Length (ft) 38 ft (11.6m)Length
(ft) T4 T3 T2 T1 Extend Base
50.7 12.7 76.5 ft (23.3m)
63.7 12.7 13.0BaseT3 T2 T1
( )
76.5 12.7 13.0 12.8
BaseT3 T2 T1
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
For sa
les us
e only
Not for crane operations
N3P01387 of 244HTC---8690
Boom Mode Performance --- General Reference GuideShaded areas reflect maximum capacity at radius, based on boom modes and boom lengths.
11,500 (lb) Counterweight 32,500 (lb) Counterweight
Rad (ft) Boom Length (ft) Rad (ft) Boom Length (ft)
50 50.7 50 50.7
10 10
30 30
40 40
60 63.7 60 63.7
10 10
30 30
50 50
70 70
10 10
30 30
50 50
60 60
80 76.5 80 76.5
12 12
30 30
50 50
70 70
90 90
15 15
40 40
60 60
80 80
100 102 100 102
20 20
40 40
60 60
80 80
90 90
110 115.8 110 115.8
20 20
40 40
60 60
80 80
100 100
120 120
25 25
50 50
70 70
90 90
110 110
130 127.3 130 127.3
25 25
50 50
70 70
90 90
120 120
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
For sa
les us
e only
Not for crane operations
N3P0138 8 of 244 HTC---8690
Winch PerformanceWinch Line Pulls
Drum Rope Capacity (ft)Wire Rope Two Speed Winch
Drum Rope Capacity (ft)Wire Rope
Layer Low Speed High Speed
Available (lb*) Available (lb) Layer Total
1 16,880 7,595 114 114
2 15,519 6,982 124 238
3 14,362 6,461 134 372
4 13,365 6,013 144 516
5 12,497 5,623 154 670
6 N/A N/A 164 834
*Maximum lifting capacity: Type RB Rope=12,920 lb Type ZB Rope=15,600 lb
Wire Rope Capacity ChartMaximum Lifting Capacities Based On Wire Rope Strength
Partsof
3/4” 3/4”Notesof
Line Type RB Type ZBNotes
1 12,920 15,600 S Capacities shown are in pounds and workingl d t t d th ti th2 25,840 31,200
p p gloads must not exceed the ratings on thecapacity charts in the Crane Rating Manual
3 38,760 46,800capacity charts in the Crane Rating Manual.
S Capacity deducts for auxiliary lifting devices4 51,680 62,400
S Capacity deducts for auxiliary lifting devicesdo not apply for wire rope strength capacities.
5 64,600 78,000do not apply for wire rope strength capacities.
S Capacities over 129,200 lb require special6 77,520 93,600
S Capacities over 129,200 lb require specialreeving and/or higher strength rope.
7 90,440 109,200
g / g g p
S Study Operator’s Manual for wire ropei ti d i l t f li8 103,360 124,800
y p pinspection procedures, single part of lineapplications and reeving diagrams
9 116,280 140,400applications, and reeving diagrams.
10 129,200 156,000
11 142,120 171,600
12 155,040 187,200
Rope Weight---Pounds Per Foot 1.2 1.3
LBCE Description
Type RB18 X 19 Rotation Resistant --- Compacted Strand --- High Strength Preformed,Right Regular Lay
Type ZB 36 X 7 Non---Rotating --- Extra Improved Plow Steel --- Right Regular Lay
Hydraulic Circuit Pressure SettingsFunction Pressure (psi)
Front And Rear Winch 3,500
Outriggers 3,000
Boom Hoist 4,300
Telescope 4,300
Swing 2,000
Steering 2,000
Bumper Outrigger 675
Pilot Control 475
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
For sa
les us
e only
Not for crane operations
N3P01389 of 244HTC---8690
Working Areas
Center OfRotation
Note: These Lines Determine The Limiting Position Of Any Load For Operation Within Working Areas Indicated.
LongitudinalC of HTCL
LongitudinalC of HTCL
HTC On Tires
Boom Centered Over Rear
Center OfRotation
HTC On Outriggers
C BoomL
C Rear AxleL
Side
Side
Rear
360_Chart
C Front AxleL
Front
C OutriggerPontoon
L
See Note
See Note
Capacity DeductionsLoad Handling Equipment Weight (lb)
40 Ton Quick Reeve 4 Sheave Hook Block (See Hook Block For Actual Weight) 900
60 Ton Quick Reeve 4 Sheave Hook Block (See Hook Block For Actual Weight) 1,100
90 Ton Quick Reeve 6 Sheave Hook Block (See Hook Block For Actual Weight) 1,554
8.5 Ton Hook Ball (See Hook Ball For Actual Weight) 360
Auxiliary Lifting Devices Weight (lb)
Auxiliary Head Attached 100
Lifting From Main Boom With:
35 ft Or 58 ft Fly Stowed On Boom Base (See Operation Note 5) 0
35 ft Offset Fly Erected But Not Used 8,300
58 ft Offset Fly Erected But Not Used 17,900
74 ft or 90 ft Offset Fly Erected But Not Used Prohibited
16 ft Fly Extension Erected But Not Used 2,900
Lifting From 35 ft Offset Fly With:
23 ft Fly Tip Erected But Not Used Prohibited
23 ft Fly Tip Stowed On 35 ft Offset Fly Prohibited
Note: Capacity deductions are for Link-Belt supplied equipment only.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
For sa
les us
e only
Not for crane operations
N3P0138 10 of 244 HTC---8690
Allowable Crane Configuration --- Main Boom
Boom Length (ft)
Outrigger Position Counterweight (lb)
0
2,500
5,500
8,500
11,500
14,500
Full 17,500 38---140 38---127.3 38---115.8 38---102 38---76.5Full20,500
38 140 38 127.3 38 115.8 38 102 38 76.5
23,500
26,500
29,500
32,500
39,500
0 38---110 38---100 38---90 38---90
2,500 38---120 38---100 38---100
Intermediate 5,500 38---120 38---110 38---10038 102
38---76.5Intermediate8,500 38---130 38---120
38 115 8
38---10238 76.5
11,500 --- 39,500 38---140 38---127.338---115.8
0
2,500 38---80
Retracted5,500 38---90
Not AllowedRetracted8,500 38---100
Not Allowed
11,500 38---100
14,500---39,500
0---2,500 38---80
On Tires 5,500---32,500 38---100 Not AllowedOn Tires39,500
Not Allowed
On tire capacities are based on over the rear position only, outrigger capacities are based on 360û rotation.
Wind Speed RestrictionsIf The Speed Is: Rated Lifted Capacities Must Be Reduced By At Least:
0---20 mph Normal Lifting Operations (See Capacity Charts)
21---29 mph 40%
30---39 mph 70%
40 mph or Greater Crane operation must be shutdown and the boom retractedand lowered to horizontal.
S Additional reductions are required for loads with large wind sail area.S These restrictions are based on crane on fully extended outriggers.S During high winds, the operator shall add 10_ to all minimum boom angles due to no load stability and
shall not boom down below that angle.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
15460 (supersedes 5424)---0506---N3
HTC-8690Link-Belt Cranes
Technical DataSpecifications & Capacities
Telescopic Boom Truck Crane90 ton (81.6 metric ton)
CAUTION: This material is supplied forreference use only. Operator must refer toin---cab Crane RatingManual andOperator’sManual to determine allowable crane liftingcapacities and assembly and operatingprocedures.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
5460 (supersedes 5424)---0506---N3
HTC-8690Link-Belt Cranes
Table Of ContentsBoom, Attachments, and Upper Structure 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Boom 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Boom Wear Pads 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Boom Head 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Boom Elevation 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Auxiliary Lifting Sheave --- Optional 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Hook Blocks and Balls --- Optional 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Fly --- Optional 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Fly Extensions --- Optional 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Upper Operator’s Cab and Controls 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Swing 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Electrical 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Additional Equipment 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Load Hoist System 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Load Hoist Performance 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2M Main and Optional Auxiliary Winches 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Hydraulic System 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Counterweight 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Carrier 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .General 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Outriggers 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Steering and Axles 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Suspension 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Tires and Wheels 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Brakes 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Electrical 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Engine 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Transmission 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Carrier Speeds and Gradeability 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Fuel Tank 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Hydraulic System 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pump Drive 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Lower Cab and Controls 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Additional Equipment 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Axle Loads 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Axle Loads with 2--Axle or 3--Axle Boom Dolly 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .General Dimensions 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Working Range Diagram 12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Boom Extend Modes 13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Main Boom Lift Capacity Charts -- Standard 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8,500 lb Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 14. . . . . . . . . . . . . . . . . . . . . . . . . . . .8,500 lb Counterweight --- On Tires --- Stationary --- Boom Centered Over Rear 15. . . . . . . . . . . . . . . . . . . .8,500 lb Counterweight --- On Tires --- Pick & Carry (1 mph) --- Boom Centered Over Rear 15. . . . . . . . . .11,500 lb Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 16. . . . . . . . . . . . . . . . . . . . . . . . . . .11,500 lb Counterweight --- On Tires --- Stationary --- Boom Centered Over Rear 17. . . . . . . . . . . . . . . . . . .11,500 lb Counterweight --- On Tires --- Pick & Carry (1 mph) --- Boom Centered Over Rear 17. . . . . . . . .
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
5460 (supersedes 5424)---0506---N3
HTC---8690 Link---Belt Cranes
Main Boom Lift Capacity Charts -- Optional 18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32,500 lb Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 18. . . . . . . . . . . . . . . . . . . . . . . . . . .32,500 lb Counterweight --- On Tires --- Stationary --- Boom Centered Over Rear 19. . . . . . . . . . . . . . . . . . .32,500 lb Counterweight --- On Tires --- Pick & Carry (1 mph) --- Boom Centered Over Rear 19. . . . . . . . .39,500 lb Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 20. . . . . . . . . . . . . . . . . . . . . . . . . . .Fly Attachment Lift Capacity Charts -- Optional 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8,500 lb Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 21. . . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 2˚ Fly Offset 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 15˚ Fly Offset 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 30˚ Fly Offset 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 45˚ Fly Offset 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11,500 lb Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 23. . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 2˚ Fly Offset 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 15˚ Fly Offset 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 30˚ Fly Offset 24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 45˚ Fly Offset 24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32,500 lb Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 25. . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 2˚ Fly Offset 25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 15˚ Fly Offset 25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 30˚ Fly Offset 26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 45˚ Fly Offset 26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39,500 lb Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 27. . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 2˚ Fly Offset 27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 15˚ Fly Offset 27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 30˚ Fly Offset 28. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 45˚ Fly Offset 28. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Main Boom Lift Capacity Charts -- Optional (Metric) 29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 856kg Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 29. . . . . . . . . . . . . . . . . . . . . . . . . . . .3 856kg Counterweight --- On Tires --- Stationary --- Boom Centered Over Rear 30. . . . . . . . . . . . . . . . . . . .3 856kg Counterweight --- On Tires --- Pick & Carry (1.6 km/h) --- Boom Centered Over Rear 30. . . . . . . .5 216kg Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 31. . . . . . . . . . . . . . . . . . . . . . . . . . . .5 216kg Counterweight --- On Tires --- Stationary --- Boom Centered Over Rear 32. . . . . . . . . . . . . . . . . . . .5 216kg Counterweight --- On Tires --- Pick & Carry (1.6 km/h) --- Boom Centered Over Rear 32. . . . . . . .14 742kg Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 33. . . . . . . . . . . . . . . . . . . . . . . . . .14 742kg Counterweight --- On Tires --- Stationary --- Boom Centered Over Rear 34. . . . . . . . . . . . . . . . . . .14 742kg Counterweight --- On Tires --- Pick & Carry (1.6 km/h) --- Boom Centered Over Rear 34. . . . . . .17 917kg Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 35. . . . . . . . . . . . . . . . . . . . . . . . . .Fly Attachment Lift Capacity Charts -- Optional (Metric) 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 856kg Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 36. . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 2˚ Fly Offset 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 15˚ Fly Offset 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 30˚ Fly Offset 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 45˚ Fly Offset 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 216kg Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 37. . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 2˚ Fly Offset 37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 15˚ Fly Offset 37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 30˚ Fly Offset 37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 45˚ Fly Offset 37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
5460 (supersedes 5424)---0506---N3
HTC-8690Link-Belt Cranes
14 742kg Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 38. . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 2˚ Fly Offset 38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 15˚ Fly Offset 38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 30˚ Fly Offset 39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 45˚ Fly Offset 39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 917kg Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 40. . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 2˚ Fly Offset 40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 15˚ Fly Offset 40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 30˚ Fly Offset 41. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 45˚ Fly Offset 41. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
15460 (supersedes 5424)---0506---N3
HTC-8690Link-Belt Cranes
Boom, Attachments, and Upper StructureJ BoomDesign --- Five section, formed construction of extra hightensile steel consisting of one base section and four tele-scoping sections. The two plate design of each sectionhas multiple longitudinal bends for superior strength. Eachtelescoping section extends independently by means ofone double---acting, single stage hydraulic cylinder withintegrated holding valves.BoomS 38---140 ft (11.6 ---42.7m) five section boomS Integral boom dolly connectionS Five boom extend modes (EM1 through EM5), controlledfrom the operator’s cab, provide superior capacities byvarying the extension of the telescoping sections:S EM1 extends to 140.0 ft (42.7m)S EM2 extends to 127.3 ft (38.8m)S EM3 extends to 115.8 ft (35.3m)S EM4 extends to 102.0 ft (31.1m)S EM5 extends to 76.5 ft (23.3m)
S Mechanical boom angle indicatorS Maximum tip height for each extend mode is:S EM1 is 148 ft (45.1m)S EM2 is 135 ft (41.1m)S EM3 is 124 ft (37.8m)S EM4 is 110 ft (33.5m)S EM5 is 84 ft (25.6m)Boom Wear PadsS Wear pads with Teflon inserts that self ---lubricate theboom sections
S Bottom wear pads are universal for all boom sectionsS Top wear pads are universal for all boom sectionsBoom HeadS Five 16.5 in (41.9cm) root diameter nylon sheaves to han-dle up to ten parts of line
S Easily removable wire rope guardsS Rope dead end lugs on each side of the boom headS Boom head is designed for quick---reeve of the hookblock
Boom ElevationS One double acting hydraulic cylinder with integral hold-ing valve
S Boom elevation: ---3˚ to 80˚Auxiliary Lifting Sheave --- OptionalS Single 16.5 in (41.9m) root diameter nylon sheaveS Easily removable wire rope guardsS Does not affect erection of the fly or use of the main headsheavesHook Blocks and Balls --- OptionalS 40 ton (36.3mt) 4 sheave quick---reeve hook block withsafety latch
S 60 ton (54.4mt) 4 sheave quick---reeve hook block withsafety latch
S 90 ton (81.6mt) 6 sheave quick---reeve hook block withsafety latch
S 8.5 ton (7.7mt) swivel and non---swivel hook balls withsafety latch
S 10 ton (9.1mt) swivel and non---swivel hook balls withsafety latchFly --- OptionalS 35 ft (10.7m) one piece lattice fly, stowable, offsettable to2˚, 15˚, 30˚, and 45˚. Maximum tip height is 182 ft(55.5m).
S 35 ft---58 ft (10.7 ---17.7m) two piece bi---fold lattice fly,stowable, offsettable to 2˚, 15˚, 30˚, and 45˚. Maximumtip height is 205 ft (62.5m).Fly Extensions --- OptionalS One 16 ft (4.9m) lattice extension, equipped with two 16.5in (41.9cm) root diameter nylon sheaves, to be mountedbetween the boom head and fly options. Maximum tipheight is 221 ft (67.4m).
S Two 16 ft (4.9m) lattice extensions, one equipped withtwo 16.5 in (41.9cm) root diameter nylon sheaves, to bemounted between the boom head and fly options. Maxi-mum tip height is 237 ft (72.2m). Minimum of 14,500 lb(6 577.1kg) of counterweight required.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
2 5460 (supersedes 5424)---0506---N3
HTC-8690 Link-Belt Cranes
J Upper Operator’s Cab and ControlsEnvironmental Cab --- Fully enclosed, one person cab ofgalvaneal steel structure with acoustical insulation.Equipped with:S Tinted and tempered glass windowsS Extra---large fixed front window with windshield wiper andwasher
S Swing up roof window with windshield wiperS Sliding left side door with large fixed windowS Sliding rear and right side windows for ventilationS Six way adjustable, cushioned seat with seat belt andstorage compartment
S Engine dependent warm---water heater with air ducts forfront windshield defroster and cab floor
S Defroster fan for the front windowS Bubble levelS Circulating fanS Adjustable sun visorS Dome lightS Cup holderS Fire extinguisherS Left side viewing mirrorS Pull ---out cabwalkS Two position travel swing lock
Air Conditioning --- Optional --- Integral with cab heatingsystem utilizing the same ventilation outlets
Armrest Controls --- Two dual axis hydraulic joystick con-trollers or optional single axis hydraulic controllers for:S SwingS Boom hoistS Main rear winchS Auxiliary front winch --- optionalS Drum rotation indicationS Drum rotation indicator activation switchS Winch high/low speed and disable switch(es)S Third wrap selector switch --- optionalS Counterweight handling switchS Telescopic override switchesS Warning horn button
Outrigger Controls --- Hand held control box with umbilicalcord gives the operator the freedom to view operation whilesetting the outriggers.
Foot ControlsS Boom telescopeS Swing brakeS Engine throttle
Right Front Console --- Controls and indicators for:S Engine ignition S Heating controlsS Engine throttle lock S Console dimmer switchS Pump enable S Bubble levelS Function disable S 12 volt power connectionS Swing park brake S Air conditioning --- optionalS Front windshield wiper S Boom floodlight --- optionaland washer S Rotating beacon/Strobe
S Cab floodlights light --- optionalS Warning hornCab Instrumentation --- Ergonomically positioned, analoginstrumentation for crane operation including:S Check and stop engine indicatorsS Engine coolant temperature with warning indicatorS Hydraulic oil temperature with warning indicatorS Low air pressure warning indicatorS Fuel level with warning indicatorS Tachometer
Rated Capacity Limiter --- Microguard 540 color graphicaudio---visual warning system integrated into the dash withanti ---two block and function limiter. Operating data avail-able includes:S Crane configurationS Boom length and angleS Boom head heightS Allowed load and % of allowed loadS Boom angleS Radius of loadS Actual loadS Counterweight removalS Operator settable alarms (include):S Maximum and minimum boom anglesS Maximum and minimum tip heightS Maximum boom lengthS Left/right swing positionsS Operator defined area (imaginary plane)
Integrated Third Wrap Indicator --- Optional --- Micro-guard color display visually and audibly warns the operatorwhen the wire rope is on the first/bottom layer and whenthe wire rope is down to the last three wraps.
Internal RCL Light Bar --- Optional --- Visually informs theoperator when crane is approaching maximum load capac-ity with a series of green, yellow, and red lights.
External RCL Light Bar --- Optional --- Visually informs theground crew when crane is approaching maximum loadcapacity with a series of green, yellow, and red lights.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
35460 (supersedes 5424)---0506---N3
HTC-8690Link-Belt Cranes
J SwingMotor/Planetary --- Bi ---directional hydraulic swing motormounted to a planetary reducer for 360˚ continuoussmooth swing at 1.7 rpm.
Swing Park Brake --- 360˚, electric over hydraulic, (springapplied/hydraulic released) multi ---disc brake mounted onthe speed reducer. Operated by a switch from the opera-tor’s cab.
Swing Brake --- 360˚, foot operated, hydraulic applied discbrake mounted to the speed reducer.
Swing Lock --- Two---position swing lock (boom over frontor rear) operated from the operator’s cab.
360˚ Positive Swing Lock --- Optional --- Meets New YorkCity requirement.
J ElectricalSwing Alarm --- Audio warning device signals when theupper is swinging.
LightsS Two working lights on front of the cabS One rotating amber beacon on top of the cab --- optionalS One amber strobe beacon on top of the cab --- optionalS Boom floodlight --- optional
J Additional EquipmentS Left side aluminum storage box
J Load Hoist SystemLoad Hoist Performance
Main (Rear) and Auxiliary (Front) Winches --- 3/4 in (19mm) RopeMaximum Line Pull Normal Line Speed High Line Speed Layer Total
Layer lb kg ft/min m/min ft/min m/min ft m ft m1 16,880 7 656.6 179 54.6 356 108.5 114 34.7 114 34.72 15,519 7 039.3 195 59.4 387 118.0 124 37.8 238 72.53 14,362 6 514.5 211 64.3 418 127.4 134 40.8 372 113.44 13,365 6 062.3 226 68.9 449 136.9 144 43.9 516 157.35 12,497 5 668.5 242 73.8 480 146.3 154 46.9 670 204.26 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 164 50.0 834 254.2
Wire Rope ApplicationDiameter
TypeMaximum
Permissible Loadin mm lb kg
Main (Rear) WinchStandard 3/4 19 18x19 rotation resistant --- right regular lay (Type RB) 12,920 5 860.5Optional 3/4 19 36x7 rotation resistant --- right regular lay (Type ZB) 15,600 7 076.2
Auxiliary (Front) WinchStandard 3/4 19 18x19 rotation resistant --- right regular lay (Type RB) 12,920 5 860.5Optional 3/4 19 36x7 rotation resistant --- right regular lay (Type ZB) 15,600 7 076.2
2M Main and Optional Auxiliary WinchesS Axial piston, full and half displacement (2---speed) motorsdriven through planetary reduction unit for positive con-trol under all load conditions.
S Grooved laggingS Power up/down mode of operationS Hoist drum cable follower --- optional
S Drum rotation indicatorS Drum diameter: 16 in (40.6cm)S Rope length:S Main: 730 ft (222.5m)S Auxiliary: 600 ft (182.9m) or 730 ft (222.5m)
S Maximum rope storage: 834 ft (254.2m)S Terminator style socket and wedgeThird wrap indicator --- optional --- Visually and audiblywarns the operator when the wire rope is on the bottomlayer and when the wire rope is down to the last threewraps.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
4 5460 (supersedes 5424)---0506---N3
HTC-8690 Link-Belt Cranes
J Hydraulic SystemAll circuits of the hydraulic system are pressure compen-sated.
Counterbalance Valves --- All hoist motors, boom extendcylinders, and boom hoist cylinders are equipped withcounterbalance valves to provide load lowering and to pre-vent accidental load drop if hydraulic power is suddenlyreduced.
Hydraulic Oil Coolers --- Two carrier mounted coolers re-move heat from the hydraulic oil. One is integral to the en-gine radiator/charge air cooler and the other is mounted inleft side access ladder.
Boom Hoist Float Valves (Optional) --- For transportingthe boom over the rear of the crane with a boom dolly. Al-lows hydraulic oil within the boom hoist cylinder to flowbetween piston side and case side, allowing the boom tofloat while on the boom dolly.
Swing Brake Release --- For transporting the boom overthe rear of the crane with a boom dolly. Holds the 360ºswing park brake in the released position allowing freerotation of the upper structure.
J CounterweightStandard --- Total of 11,500 lb (5 216kg) of total counter-weight consisting of three, hydraulically removable counter-weights. Assembled and disassembled by hydraulic cylin-ders controlled from the operator’s cab with capacities for:S 0 lb (0kg) counterweightS 2,500 lb (1 134.0kg) counterweightS 5,500 lb (2 494.8kg) counterweightS 8,500 lb (3 855.5kg) counterweightS 11,500 lb (5 216.3kg) counterweightOptional --- 15,000 lb (6 803.9kg) in addition to standardcounterweight for a total of 26,500 lb (12 020.2kg) withadditional capacities for:S 14,500 lb (6 577.1kg) counterweightS 20,500 lb (9 298.6kg) counterweightS 23,500 lb (10 659.4kg) counterweightS 26,500 lb (12 020.2kg) counterweightOptional --- 21,000 lb (9 525.4kg) in addition to standardcounterweight for a total of 32,500 lb (14 741.8kg) withadditional capacities for:S 14,500 lb (6 577.1kg) counterweightS 17,500 lb (7 937.9kg) counterweightS 20,500 lb (9 298.6kg) counterweightS 23,500 lb (10 659.4kg) counterweightS 26,500 lb (12 020.2kg) counterweightS 29,500 lb (13 381.0kg) counterweightS 32,500 lb (14 741.8kg) counterweightOptional --- 28,000 lb (12 700.6kg) in addition to stan-dard counterweight for a total of 39,500 lb (17 916.9kg)with additional capacities for:S 14,500 lb (6 577.1kg) counterweightS 17,500 lb (7 937.9kg) counterweightS 20,500 lb (9 298.6kg) counterweightS 23,500 lb (10 659.4kg) counterweightS 26,500 lb (12 020.2kg) counterweightS 29,500 lb (13 381.0kg) counterweightS 32,500 lb (14 741.8kg) counterweightS 39,500 lb (17 916.9kg) counterweight*Low speed jobsite travel is offered for these optional counter-weight configurations and a boom dolly or boom trailer maybe required for on ---highway travel.
* Overall width of the crane increases to 11 ft (3.4m) forthis counterweight configuration
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
55460 (supersedes 5424)---0506---N3
HTC-8690Link-Belt Cranes
11,500 lb (5 216.3kg) 26,500 lb (12 020.2kg)
32,500 lb (14 741.8kg) 39,500 lb (17 916.9kg)
2,500 lb(1 134.0kg)Tray
6,000 lb(2 721.6kg)Piece
3,000 lb(1 360.8kg)Top 3,000 lb
(1 360.8kg)Piece
12,000 lb(5 443.1kg)Piece
7,000 lb(3 175.2kg)2---Pieces
2,500 lb(1 134.0kg)Tray
6,000 lb(2 721.6kg)Piece
3,000 lb(1 360.8kg)Top
3,000 lb(1 360.8kg)Piece
12,000 lb(5 443.1kg)Piece
2,500 lb(1 134.0kg)Tray
6,000 lb(2 721.6kg)Piece
3,000 lb(1 360.8kg)Top
6,000 lb(2 721.6kg)Piece
2,500 lb(1 134.0kg)Tray
6,000 lb(2 721.6kg)Piece
3,000 lb(1 360.8kg)Top
3,000 lb(1 360.8kg)Piece
12,000 lb(5 443.1kg)Piece
6,000 lb(2 721.6kg)Piece
CounterweightPackages
11,500 lb (5 216.3kg) --- Standard
26,500 (12 020.2kg) --- Optional
32,500 (14 741.8kg) --- Optional
39,500 (17 916.9kg) --- Optional
CounterweightModules
2,500 lb(1 134.0kg)Tray
6,000 lb(2 721.6kg)Piece
3,000 lb(1 360.8kg)Top
3,000 lb(1 360.8kg)Piece
12,000 lb(5 443.1kg)Piece
6,000 lb(2 721.6kg)Piece
7,000 lb(3 175.2kg)2---Pieces
CounterweightUsage
Configurations
0 lb(0kg)
2,500 lb(1 134.0kg) X5,500 lb(2 494.8kg) X X8,500 lb(3 855.5kg) X X11,500 lb(5 216.3kg) X X X14,500 lb(6 577.1kg) X X X X17,500 lb(7 937.9kg) X X X X20,500 lb(9 298.6kg) X X X X X23,500 lb(10 659.4kg) X X X X26,500
(12 020.2kg) X X X X X29,500 lb(13 381.0kg) X X X X X32,500
(14 741.8kg) X X X X X X39,500
(17 916.9kg) X X X X X X X
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
6 5460 (supersedes 5424)---0506---N3
HTC-8690 Link-Belt Cranes
CarrierJ GeneralS 8 ft 6 in (2.6 m) wideS 23 ft 10 in (7.26m) wheelbase (centerline of first axle tocenterline of fourth axle)
S Frame --- Box---type, torsion resistant, welded construc-tion made of high tensile steel. Equipped with front andrear towing and tie---down lugs, tow connections, andaccess ladders.
J OutriggersBoxes --- Two double box, front and rear welded to the car-rier frame
Beams and Jacks --- Four dual stage beams with ConfinedArea Lifting Capacities (CALC) provide selectable outriggerextensions of full, intermediate, and retracted positions.Jacks with integral check valves, hydraulically controlledfrom the operator’s cab and on both sides of carrier. A fifthfront bumper outrigger with integral check valves is hydrau-lically controlled from the operator’s cab and at the frontbumper of carrier.
Pontoons --- Four lightweight, stow’n go, 23.5” x 27.25”(59.7 x 69.2cm) hexagonal steel pontoons with a contactarea of 485 in2 (3 129cm2) can be stored for road travel ineither the storage racks on the carrier or under the outrig-ger boxes.
Main Jack Reaction --- 106,000 lb (48 080.8kg) force and217 psi (1 496.2kPa) ground bearing pressure
J Steering and AxlesS Sheppard full integral master gear/slave gear steeringsystem provides hydraulic assisted steering with me-chanical link between steering wheel and wheels
S Drive --- 8 x 4 for on/off ---highway travelS Axle 1 & 2 --- Tandem steered, non---drivenS Axle 3 & 4 --- Tandem non---steered, driven with reduc-tion: 5.38 to 1
S Inter---Axle Differential Lock --- Traction adding devicethat locks axle 3 with axle 4. Operated by a switch fromthe carrier cab.
J SuspensionFront --- Raydan Air Link walking beam air suspension
Rear --- Raydan Air Link walking beam air suspensionS Axle Lift System --- Optional --- Improves rear tireground clearance when the crane is up on outriggers.The rear tandem axles are raised and lowered with aswitch in the carrier cab. The axle lift system can be con-trolled with a switch on both sides of the carrier.
J Tires and WheelsFront --- Four (single) 445/65R22.5 tires on aluminum discwheels
Rear --- Eight (dual) 12R22.5 tires on aluminum disc wheelsS Spare tires and wheels --- optionalS Tire inflation kit --- optional
J BrakesService --- Full air anti ---lock (ABS) brakes on all wheelends. Dual circuit compressed air system with air dryer.
Parking/Emergency --- Spring loaded type, acting on 3rdand 4th axles automatically apply when air pressure dropsbelow 40 psi (275.8kPa) in both circuits.
J ElectricalBattery --- Three batteries provide 12 volt starting and op-eration
LightsS Front lighting includes two main headlights, two highbeam lights, two parking/directional indicators, and threecab marker lights.
S Side lighting includes three parking/directional indicatorsper side.
S Rear lighting includes two parking/directional indicators,two parking/brake lights, two reverse lights, three markerlights, and a license plate light.
S Other equipment includes hazard/warning system, cablight, instrument panel light, and signal horn.
S One amber strobe beacon on top of the cab --- optionalS Daytime running lights --- optional
J EngineSpecification Detroit Diesel Series 60
Numbers of cylinders 6Cycle 4Bore and Stroke: inch (mm) 5.12 x 6.30 (130x160)Piston Displacement: in3 (L) 778 (12.7)
Max. Brake Horsepower: hp (kW) 445 (331.8) @ 1,800 rpm430 (320.7) @ 2,100 rpmPeak Torque: ft lb (J) 1,450 (1 966.1) @ 1,200 rpmAlternator: volts --- amps 12 --- 130Crankcase Capacity: qt (L) 32 (30.3)S Cruise controlS Three---stage engine compression brakeS Thermostatically controlled, hydraulically driven radiator fanS 120 volt engine block heaterS Ether injection system --- optional
J TransmissionAutomated --- ZF AS---TRONIC (no clutch pedal) manualtransmission with 12 forward gears and 2 reverse gears.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
75460 (supersedes 5424)---0506---N3
HTC-8690Link-Belt Cranes
J Carrier Speeds and Gradeability
ZF Astronic Governed SpeedGradeability(@ Peak Torque
Except Creep @ Idle)
Gear Ratio mph km/h % Grade
12th 0.778 62.3 100.3 2.1
11th 1.000 48.5 78.1 3.1
10th 1.267 38.3 61.6 4.2
9th 1.629 29.8 48.0 5.8
8th 2.101 23.1 37.2 7.8
7th 2.700 18.0 29.0 10.2
6th 3.552 13.7 22.0 13.7
5th 4.565 10.6 17.1 17.8
4th 5.784 8.4 13.5 22.8
3rd 7.435 6.5 10.5 29.5
2nd 9.590 5.1 8.2 38.2
1st 12.326 3.9 6.3 49.3
Reverse (Low) 11.413 4.3 6.9 45.6
Reverse (High) 8.880 5.5 8.9 35.3
1st @ 700 rpm 12.326 1.3 2.1 20.9
Rev. (Low) @ 700 rpm 11.413 1.4 2.3 19.3
Rev. (High) @ 700 rpm 8.880 1.8 2.9 14.9
Based on a gross vehicle weight of 95,000 lb (43 091.3kg)
J Fuel TankOne 95 gal (359.6L) capacity tank
J Hydraulic SystemAll functions are hydraulically powered allowing positive,precise control with independent or simultaneous operationof all functions.
Main PumpsS Three fixed displacement gear pumps with automaticdisconnect for the main and auxiliary winches, swing,boom hoist, control circuit, and telescope for use whenpick & carry switch is in travel mode.
S One fixed displacement gear pump for steering and thefront bumper outrigger
S Two fixed displacement gear pumps for engine coolingfan and main outriggers. These pumps also provide flowto the winches and boom hoist for “pick & carry” mode.Operated by a switch in the carrier cab.
S Combined pump capacity of 188 gpm (711.7Lpm)
Hydraulic Reservoir --- 144 gal (545.1L) capacity equippedwith sight level gauge. Diffusers built in for deaeration.
Filtration --- One 10 micron, full flow, return line filter. All oilis filtered prior to return to reservoir. Accessible for easyfilter replacement.
J Pump DriveAll pumps are mechanically driven by the diesel engine.Main and auxiliary winches, swing, boom hoist, control cir-cuit, and telescope pumps are mounted to an automaticpump disconnect on the rear of the transmission to aid incold weather starting as well as to reduce pump wear whiletraveling.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
8 5460 (supersedes 5424)---0506---N3
HTC-8690 Link-Belt Cranes
J Lower Cab and ControlsEnvironmental Cab --- Fully enclosed, one person cab ofcomposite structure with acoustical insulation. Equippedwith:S Tinted and tempered glass windowsS Roll down left side window for ventilationS Sliding rear and right side windows for ventilationS Windshield wiper and washerS Six way adjustable and air suspended driver’s seat withseat belt
S Two adjustable rear view mirrorsS Engine dependent warm---water heater with air ducts forwindshield defroster and cab floor
S Adjustable sun visorS Dome lightS 12 volt connectionS Fire extinguisherAir Conditioning --- Optional --- Integral with cab heatingsystem utilizing the same ventilation outlets
Cab Instrumentation --- Ergonomically positioned analoginstrumentation for driving including:S Speedometer with odometer, hourmeter, trip odometer,and clock
S Front and rear air pressure with warning indicatorS Engine coolant temperature with warning indicatorS Engine oil pressure with warning indicatorS Voltage indicator with warning indicatorS Fuel levelS TachometerRight Side Console --- Controls and indicators for:S Transmission gear shiftingS Transmission digital readoutS Cruise controlsS Engine compression brake controls
Dash Mounted Controls For:S Windshield wiper and washerS Carrier lightsS Carrier/upper throttle controlS Engine cooling fan overrideS Cab heater/air conditioningS Console dimmer switchS Engine diagnostic switchS Park brakeS Engine ignitionS Pick & carry switchDash Mounted Indicator For:S Check and stop engineS Turn signal indicationS Park brakeS Cruise activationS High beam headlightsS Check anti ---lock brake system
Foot Controls For:S Carrier service brakesS Engine throttle
J Additional EquipmentStandard:S Aluminum full deck fenders with mud flapsS Left and right bubble levelsS Air hose connection portsS Clearance flags
Optional:S Pneumatic and electrical quick disconnect connectorsmounted on the rear for trailer or boom dolly brakes andlights
S Left side aluminum storage boxS Rear mounted pintle hook
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
95460 (supersedes 5424)---0506---N3
HTC-8690Link-Belt Cranes
Axle LoadsBase crane with full tank of fuel
and no counterweight
Gross Vehicle Weight(1) Front Axles Rear Axles
lb kg lb kg lb kg79,206 35 927 34,938 15 848 44,268 20 080
Driver in carrier cab 250 113 315 143 ---65 ---29Rear pintle hook 13 6 ---6 ---3 19 8Pneumatic and electrical connectors for trailer or boom dolly 11 5 ---4 ---2 15 7Carrier aluminum storage box 59 27 28 13 31 14Air ride lift system --- rear axles 48 22 0 0 48 22Ether injection 13 6 12 5 1 1Air conditioning --- carrier 45 20 55 25 ---10 ---4Hoist drum follower --- main 69 31 ---35 ---16 104 47Auxiliary winch with 600 ft (182.9m) of 3/4” (19mm) type “RB” rope 731 332 ---239 ---108 970 440Hoist drum follower --- auxiliary 69 31 ---21 ---10 90 41Substitute 600 ft (182.9m) of rope with 730 ft (222.5m) of rope ---auxiliary 163 74 ---54 ---24 217 98
Remove 730 ft (222.5m) of rope from rear (main) winch ---931 ---422 373 169 ---1,304 ---591Remove 600 ft (182.9m) of rope from front (auxiliary) winch ---768 ---348 252 114 ---1,020 ---463Upper aluminum storage box 42 19 ---4 ---2 46 21Air conditioner --- operator’s cab 220 100 ---7 ---3 227 103360˚ mechanical swing lock 140 64 21 9 119 542,500 lb (1 134.0kg) counterweight tray on upper 2,544 1 154 ---1,255 ---569 3,799 1 7233,000 lb (1 360.8kg) counterweight on upper 2,981 1 352 ---1,471 ---667 4,452 2 0196,000 lb (2 721.6kg) counterweight on upper 6,000 2 722 ---2,961 ---1 343 8,961 4 0656,000 lb (2 721.6kg) counterweight on upper 6,000 2 722 ---2,961 ---1 343 8,961 4 06512,000 lb (5 443.1kg) counterweight on upper 12,050 5 466 ---5,947 ---2 697 17,997 8 1633,000 lb (1 360.8kg) top counterweight on upper 3,009 1 365 ---1,485 ---674 4,494 2 038Floodlight to the front of boom base section 7 3 6 3 1 1Fly mounting brackets to boom base section for fly options 176 80 136 62 40 1835 ft (10.7m) offsettable, one---piece lattice fly --- stowed 1,591 722 1,539 698 52 2435---58 ft (10.7---17.7m) offsettable, two---piece (bi--- fold) lattice fly ---stowed 2,263 1 026 1,886 855 377 171
Auxiliary lifting sheave 110 50 200 91 ---90 ---4140 ton (36.3mt) 4---sheave hook block at front bumper 900 408 1,570 712 ---670 ---30460 ton (54.4mt) 4---sheave hook block at front bumper 1,109 503 1,935 878 ---826 ---37590 ton (81.6mt) 6---sheave hook block at front bumper 1,554 705 2,711 1 230 ---1,157 ---5258.5 ton (7.7mt) hook ball at front bumper 360 163 628 285 ---268 ---12210 ton (9.1mt) hook ball at front bumper 580 263 1,012 459 ---432 ---196
Counterweight Load TransferFront Axles Rear Axles
lb kg lb kgTransfer 2,500 lb (1 134.0kg) counterweight tray to carrier deck 3,194 1 449 ---3,194 ---1 449Transfer 3,000 lb (1 360.8kg) counterweight to carrier deck 3,742 1 697 ---3,742 ---1 697Transfer 6,000 lb (2 721.6kg) counterweight to carrier deck 7,532 3 416 ---7,532 ---3 416Transfer 6,000 lb (2 721.6kg) counterweight to carrier deck 7,532 3 416 ---7,532 ---3 416Transfer 12,000 lb (5 443.1kg) counterweight to carrier deck 15,128 6 862 ---15,128 ---6 862Transfer 3,000 lb (1 360.8kg) top counterweight to carrier deck 3,778 1 714 ---3,778 ---1 714
Axle Maximum Load @ 65 mph (105km/h)Front 46,400 lb (21 047kg) --- aluminum disc wheels with 445/65R22.5 tiresRear 52,000 lb (23 587kg) --- aluminum disc wheels with 12R22.5 tires
(1) Adjust gross vehicle weight and axle loading according to component weight. All weights are ±3%.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
10 5460 (supersedes 5424)---0506---N3
HTC-8690 Link-Belt Cranes
Axle Loads with 2--Axle or 3--Axle Boom DollyBase crane with full tank of fuel
and no counterweight
Gross VehicleWeight (1) Front Axles Rear Axles Dolly Axles
lb kg lb kg lb kg lb kg79,206 35 927 29,457 13 361 35,680 16 184 14,069 6 382
Nelson 2---axle boom dolly 6,000 2 722 0 0 0 0 6,000 2 722Nelson 3---axle boom dolly 9,000 4 082 0 0 0 0 9,000 4 082Driver in carrier cab 250 113 315 143 ---65 ---29 0 0Rear pintle hook 13 6 ---6 ---3 19 8 0 0Pneumatic and electrical connectors for trailer or boom dolly 11 5 ---4 ---2 15 7 0 0Carrier aluminum storage box 59 27 28 13 31 14 0 0Air ride lift system --- rear axles 48 22 0 0 48 22 0 0Ether injection 13 6 12 5 1 1 0 0Air conditioning --- carrier 45 20 55 25 ---10 ---4 0 0Hoist drum follower --- main 69 31 53 24 16 7 0 0Auxiliary winch with 600 ft (182.9m) of 3/4” (19mm) type “RB” rope 731 332 435 197 296 134 0 0Hoist drum follower --- auxiliary 69 31 40 18 29 13 0 0Substitute 600 ft (182.9m) of rope with 730 ft (222.5m) of rope ---auxiliary 163 74 97 44 66 30 0 0
Remove 730 ft (222.5m) of rope from rear (main) winch ---931 ---422 ---623 ---282 ---308 ---140 0 0Remove 600 ft (182.9m) of rope from front (auxiliary) winch ---768 ---348 ---458 ---208 ---310 ---140 0 0Upper aluminum storage box 42 19 15 7 27 12 0 0Air conditioner --- operator’s cab 220 100 66 30 154 70 0 0360˚ mechanical swing lock 140 64 17 8 123 56 0 02,500 lb (1 134.0kg) counterweight tray on carrier deck 2,544 1 154 1,938 879 606 275 0 03,000 lb (1 360.8kg) counterweight on carrier deck 2,981 1 352 2,271 1 030 710 322 0 06,000 lb (2 721.6kg) counterweight on carrier deck 6,000 2 722 4,571 2 074 1,429 648 0 06,000 lb (2 721.6kg) counterweight on carrier deck 6,000 2 722 4,571 2 074 1,429 648 0 012,000 lb (5 443.1kg) counterweight on carrier deck 12,050 5 466 9,181 4 164 2,869 1 301 0 03,000 lb (1 360.8kg) top counterweight on upper 3,009 1 365 2,293 1 040 716 325 0 0Flood light to the front of boom base section 7 3 1 1 1 1 5 2Fly mounting brackets to boom base section for fly options 176 80 30 14 30 14 116 5335 ft (10.7m) offsettable, one---piece lattice fly --- stowed 1,591 722 168 76 170 77 1,253 56835---58 ft (10.7---17.7m) offsettable, two---piece (bi--- fold) lattice fly ---stowed 2,263 1 026 339 154 342 155 1,583 718
Two 16 ft (4.9m) lattice inserts (stowed on 3---axle boom dolly) 1,584 718 0 0 0 0 1,584 718Auxiliary lifting sheave 110 50 ---19 ---9 ---19 ---9 149 6740 ton (36.3mt) 4---sheave hook block at boom head 900 408 ---134 ---61 ---135 ---61 1,169 53060 ton (54.4mt) 4---sheave hook block at boom head 1,109 503 ---165 ---75 ---167 ---76 1,441 65490 ton (81.6mt) 6---sheave hook block at boom head 1,554 705 ---231 ---105 ---233 ---106 2,019 9168.5 ton (7.7mt) hook ball at boom head 360 163 ---54 ---24 ---54 ---25 468 21210 ton (9.1mt) hook ball at boom head 580 263 ---87 ---39 ---87 ---39 754 342
Counterweight Load TransferFront Axles Rear Axles Dolly Axleslb kg lb kg lb kg
Transfer 3,000 lb (1 360.8kg) counterweight to the boom dolly ---2,271 ---1 030 ---710 ---322 2,981 1 352Transfer 6,000 lb (2 721.6kg) counterweight to the boom dolly ---4,571 ---2 074 ---1,429 ---648 6,000 2 722Transfer 6,000 lb (2 721.6kg) counterweight to the boom dolly ---4,571 ---2 074 ---1,429 ---648 6,000 2 722Transfer 12,000 lb (5 443.1kg) counterweight to the boom dolly ---9,181 ---4 164 ---2,869 ---1 301 12,050 5 466Transfer 3,000 lb (1 360.8kg) top counterweight to the boom dolly ---2,293 ---1 040 ---716 ---325 3,009 1 365
Axle Maximum Load @ 65 mph (105km/h)Front 46,400 lb (21 047kg) --- aluminum disc wheels with 445/65R22.5 tiresRear 52,000 lb (23 587kg) --- aluminum disc wheels with 12R22.5 tires
(1) Adjust gross vehicle weight and axle loading according to component weight. All weights are ±3%.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
115460 (supersedes 5424)---0506---N3
HTC-8690Link-Belt Cranes
General Dimensions
Not To Scale
10’ 11”(3.33m)
7”(17.78cm)
17˚
7’ 0”(2.13m)
38’ 0”(11.58m)
45’ 7”(13.89m)
CL OF ROTATION
9’ 6”(2.90m)
11’ 0”(3.35m)
14’ 8”(4.47m)
10.75”(0.27m)GroundClearance
5’ 9”(1.75m)
34”(0.86m)
16˚
6’ 2.50”(1.89m)
5’ 1.50”(1.56m)
11’ 6.50”(3.52m)
7’ 9” (2.36m)FULLY RETRACTED
9’ 8” (2.95m)FULLY RETRACTED
14’ 7” (4.45m)INTERMEDIATE EXTENDED
16’ 7” (5.05m)INTERMEDIATE EXTENDED
24’ 0” (7.32m)FULLY EXTENDED
26’ 0” (7.92m)FULLY EXTENDED
22.75”(0.58m)
GROUND LEVELWITH CRANE
ON OUTRIGGERS
8.50”(0.22m)
14.25”(0.36m)
14.25”(0.36m)
5’ 0”(1.52m)
4’ 2”(1.27m)
Turning Radius English MetricWall to wall over carrier 48’ 4” 14.7mWall to wall over boom 49’ 2” 15.0mWall to wall over boom attachment 51’ 0” 15.5mCurb to curb 44’ 1” 13.4mCenterline of tire 43’ 4” 13.2m
Tail Swing English MetricWith counterweight 13’ 8” 4.2mWithout counterweight 13’ 1” 4.0m
8’ 0.50”(2.44m)
4.50”(114mm)
Overall Width English MetricWith up to 32,500 lb (14 741.8kg) counterweight 8’ 6” 2.6mWith 39,500 lb (17 916.9kg) counterweight 11’ 0” 3.4m
5’ 1”(1.55m)
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
12 5460 (supersedes 5424)---0506---N3
HTC-8690 Link-Belt Cranes
Working Range Diagram
180(54.9)
190(57.9)
170(51.8)
160(48.8)
150(45.7)
140(42.7)130(39.6)120(36.6)
110(33.5)
100(30.5)90
(27.4)
80(24.4)70
(21.3)
60(18.3)
50(15.2)40
(12.2)30(9.1)20(6.1)
10(3.0)
0
200(61.0)
210(64.0)
220(67.1)
230(70.1)
240(73.2)
250(76.2)
10(3.0)
20(6.1)
30(9.1)
40(12.2)
50(15.2)
60(18.3)
70(21.3)
80(24.4)
90(27.4)
100(30.5)
110(33.5)
120(36.6)
130(39.6)
140(42.7)
150(45.7)
160(48.8)
170(51.8)
180(54.9)
190(57.9)
200(61.0)
210(64.0)
220(67.1)
230(70.1)
CL
RotationOf
Operating Radius From Axis Of Rotation In Feet (Meters)
HeightInFeet(Meters)AboveGround
10’(3.0m)
9’ 1”(2.8m)
45_Offset 30_
Offset
15_Offset
80˚ MaxBoom Angle
38’ (11.6m)
50’ (15.2m)
10_
20_
30_
40_
50_
60_
70_
60’ (18.3m)
70’ (21.3m)
80’ (24.4m)
90’ (27.4m)
100’ (30.5m)
110’ (33.5m)
120’ (36.6m)
130’ (39.6m)
140’ (42.7m)
115.8’ + 35’(35.3m + 10.7m)
115.8’ + 58’(35.3m + 17.7m)
140’ + 35’(42.7m + 10.7m)
140’ + 58’(42.7m + 17.7m)
140’ + 90’(42.7m + 27.4m)
BoomLength
Boom+FlyLength
140’ + 74’(42.7m + 22.6m)
2_ Offset
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
135460 (supersedes 5424)---0506---N3
HTC-8690Link-Belt Cranes
Boom Extend ModesBoom Length Section Lengthft m T4 T3 T2 T150 15.2 50%60 18.3 91%70 21.3 100% 31%80 24.4 100% 71%90 27.4 100% 100% 11%100 30.5 100% 100% 49%110 33.5 100% 100% 88%120 36.6 100% 100% 100% 25%130 39.6 100% 100% 100% 63%140 42.7 100% 100% 100% 100%Boom Length Section Lengthft m T4 T3 T2 T150 15.2 48% 2%60 18.3 48% 42%70 21.3 48% 82%80 24.4 48% 100% 21%90 27.4 48% 100% 60%100 30.5 48% 100% 98%110 33.5 48% 100% 100% 35%120 36.6 48% 100% 100% 73%127.3 38.8 48% 100% 100% 100%Boom Length Section Lengthft m T4 T3 T2 T150 15.2 0% 48%60 18.3 0% 88%70 21.3 0% 100% 27%80 24.4 0% 100% 65%90 27.4 0% 100% 100% 4%100 30.5 0% 100% 100% 41%115.8 35.3 0% 100% 100% 100%Boom Length Section Lengthft m T4 T3 T2 T150 15.2 48% 2%60 18.3 48% 42%70 21.3 48% 51% 30%80 24.4 48% 51% 50% 18%90 27.4 48% 51% 50% 55%102 31.1 48% 51% 50% 100%
Boom Length Section Length
ft m T4 T3 T2 T1
50.7 15.5 0% 51%
63.7 19.4 0% 51% 50%
76.5 23.3 0% 51% 50% 48%
BaseT4 T3 T2 T1
Extend Base
38 ft (11.6m)
140 ft (42.7m)
BaseT4 T3 T2 T1
Extend Base
38 ft (11.6m)
127.3 ft (38.8m)
BaseT3 T2 T1
Extend Base
38 ft (11.6m)
115.8 ft (35.3m)
T4 T3 BaseT2 T1
Extend Base
38 ft (11.6m)
102 ft (31.1m)
BaseT3 T2 T1
Extend Base38 ft (11.6m)
76.5 ft (23.3m)
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
14 5460 (supersedes 5424)---0506---N3
HTC-8690 Link-Belt Cranes
Main Boom Lift Capacity Charts -- Standard8,500 lb Counterweight -- Fully Extended Outriggers -- 360˚ Rotation
(All Capacities Are Listed In Pounds)
Radius(ft)
Boom Length (ft) Radius(ft)38 50 60 70 76.5/80 90 100 110 120 130 140
9 164,400* 9
10 154,600* 152,100* 117,900 89,700 10
12 129,300* 131,300* 108,800 85,000 85,100** 12
15 102,500 104,600 104,900 78,800 78,400** 57,700 15
20 74,700 77,000 77,400 70,300 76,500** 56,200 49,100 42,500 20
25 54,700 57,900 59,400 60,100 59,700 55,300 45,800 42,500 33,700 29,700 25
30 39,600 43,300 44,400 44,600 44,300 43,800 43,200 38,300 31,200 29,400 24,400 30
35 33,100 34,100 34,900 34,100 35,000 33,500 34,500 30,900 29,100 24,100 35
40 26,100 27,200 27,900 28,100 28,000 28,000 27,500 28,100 26,900 24,000 40
45 22,800 23,500 23,900 23,300 24,000 23,800 23,500 23,100 22,700 45
50 18,900 19,600 20,000 20,200 20,100 19,900 19,600 19,100 18,800 50
55 16,500 16,900 17,100 16,900 16,800 16,400 16,000 15,700 55
60 14,000 14,400 14,600 14,500 14,300 14,000 13,600 13,200 60
65 12,500 12,700 12,500 12,400 12,100 11,700 11,400 65
70 10,800 11,000 10,900 10,800 10,400 10,100 9,700 70
75 9,600 9,500 9,400 9,100 8,700 8,400 75
80 8,400 8,300 8,200 7,900 7,500 7,200 80
85 7,300 7,200 6,800 6,500 6,200 85
90 6,300 6,300 6,000 5,600 5,300 90
95 5,500 5,200 4,800 4,500 95
100 4,800 4,500 4,100 3,800 100
105 3,900 3,500 3,200 105
110 3,300 3,000 2,700 110
115 2,500 2,200 115
120 2,000 1,700 120
125 1,300 125
130 900 130
* Special Conditions Or Wire Rope Required** 76.5 EM5 mode
This information is not for crane operation. Operator must refer to the in---cab information for crane operation. Rated lifting capaci-ties shown on fully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
155460 (supersedes 5424)---0506---N3
HTC-8690Link-Belt Cranes
8,500 lb Counterweight -- On Tires -- Stationary -- Boom Centered Over Rear(All Capacities Are Listed In Pounds)
Radius(ft)
Boom Length (ft) Radius(ft)38 50 60 70 80 90 100
10 32,200 10
12 29,000 30,400 12
15 25,000 26,500 22,300 15
20 19,700 21,400 22,300 17,700 20
25 13,100 15,700 17,100 17,700 13,600 25
30 8,800 11,400 12,700 13,300 13,600 10,800 8,900 30
35 8,400 9,600 10,200 10,600 10,800 8,900 35
40 6,100 7,400 8,000 8,400 8,600 8,500 40
45 5,600 6,200 6,600 6,800 6,800 45
50 4,300 4,900 5,200 5,400 5,400 50
55 3,800 4,100 4,300 4,300 55
60 2,900 3,200 3,400 3,400 60
65 2,400 2,600 2,600 65
70 1,800 2,000 1,900 70
75 1,400 1,400 75
80 900 900 80
8,500 lb Counterweight -- On Tires -- Pick & Carry (1 mph) -- Boom Centered Over Rear(All Capacities Are Listed In Pounds)
Radius(ft)
Boom Length (ft) Radius(ft)38 50 60 70 80 90 100
10 22,200 10
12 19,800 21,100 12
15 16,600 18,100 18,900 15
20 12,500 14,200 15,100 15,500 20
25 9,300 11,200 12,200 12,600 12,800 25
30 6,800 8,800 9,800 10,300 10,600 10,800 8,900 30
35 6,900 7,900 8,400 8,800 8,900 8,900 35
40 5,300 6,400 6,900 7,200 7,400 7,400 40
45 5,100 5,600 6,000 6,100 6,100 45
50 3,900 4,500 4,900 5,100 5,000 50
55 3,600 3,900 4,100 4,100 55
60 2,700 3,100 3,300 3,300 60
65 2,400 2,600 2,500 65
70 1,800 2,000 1,900 70
75 1,400 1,400 75
80 900 900 80
This information is not for crane operation. Operator must refer to the in---cab information for crane operation. Rated lifting capaci-ties shown on fully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
16 5460 (supersedes 5424)---0506---N3
HTC-8690 Link-Belt Cranes
11,500 lb Counterweight -- Fully Extended Outriggers -- 360˚ Rotation(All Capacities Are Listed In Pounds)
Radius(ft)
Boom Length (ft) Radius(ft)38 50 60 70 76.5/80 90 100 110 120 130 140
9 165,000* 9
10 155,400* 152,100* 117,900 89,700 10
12 131,900* 133,900* 108,800 85,000 85,100** 12
15 104,600 106,700 106,500 78,800 78,400** 57,700 15
20 76,400 78,600 79,000 70,300 76,500** 56,200 49,100 42,500 20
25 57,800 61,000 61,500 63,000 62,700 55,300 45,800 42,500 33,700 29,700 25
30 42,300 46,000 47,100 47,300 47,000 46,500 45,200 38,300 31,200 29,400 24,400 30
35 35,300 36,300 36,500 36,300 36,200 35,700 35,100 30,900 29,100 24,100 35
40 27,900 29,000 29,700 29,900 29,900 29,800 29,300 28,800 28,700 24,000 40
45 23,900 24,500 25,100 24,700 24,900 25,400 25,000 24,600 23,800 45
50 20,300 21,100 21,500 21,400 21,500 21,400 21,000 20,600 20,300 50
55 17,900 18,300 18,500 18,400 18,200 17,900 17,500 17,100 55
60 15,300 15,700 15,900 15,700 15,600 15,300 14,900 14,500 60
65 13,600 13,700 13,600 13,500 13,100 12,700 12,500 65
70 11,800 12,100 11,900 11,800 11,500 11,100 10,800 70
75 10,600 10,500 10,400 10,000 9,700 9,300 75
80 9,300 9,200 9,100 8,800 8,400 8,100 80
85 8,100 8,000 7,700 7,300 7,000 85
90 7,100 7,100 6,700 6,400 6,100 90
95 6,200 5,900 5,600 5,200 95
100 5,500 5,200 4,800 4,500 100
105 4,500 4,200 3,900 105
110 3,900 3,600 3,300 110
115 3,100 2,800 115
120 2,600 2,300 120
125 1,800 125
130 1,400 130
* Special Conditions Or Wire Rope Required** 76.5 EM5 mode
This information is not for crane operation. Operator must refer to the in---cab information for crane operation. Rated lifting capaci-ties shown on fully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
175460 (supersedes 5424)---0506---N3
HTC-8690Link-Belt Cranes
11,500 lb Counterweight -- On Tires -- Stationary -- Boom Centered Over Rear(All Capacities Are Listed In Pounds)
Radius(ft)
Boom Length (ft) Radius(ft)38 50 60 70 80 90 100
10 31,600 10
12 28,500 29,900 12
15 24,600 26,100 21,900 15
20 19,400 21,100 21,900 18,600 20
25 14,600 17,200 18,100 18,600 14,800 25
30 10,000 12,600 13,800 14,400 14,800 11,800 9,400 30
35 9,400 10,600 11,200 11,600 11,800 9,400 35
40 7,000 8,200 8,800 9,200 9,400 9,400 40
45 6,400 7,000 7,400 7,600 7,500 45
50 5,000 5,600 5,900 6,100 6,100 50
55 4,400 4,800 4,900 4,900 55
60 3,400 3,800 4,000 3,900 60
65 3,000 3,200 3,100 65
70 2,300 2,500 2,400 70
75 1,900 1,800 75
80 1,400 1,300 80
11,500 lb Counterweight -- On Tires -- Pick & Carry (1 mph) -- Boom Centered Over Rear(All Capacities Are Listed In Pounds)
Radius(ft)
Boom Length (ft) Radius(ft)38 50 60 70 80 90 100
10 21,600 10
12 19,300 20,600 12
15 16,200 17,700 18,400 15
20 12,100 13,800 14,700 15,100 20
25 9,000 10,900 11,800 12,300 12,600 25
30 6,500 8,500 9,500 10,000 10,300 10,500 8,600 30
35 6,600 7,700 8,200 8,500 8,700 8,600 35
40 5,000 6,100 6,700 7,000 7,200 7,100 40
45 4,800 5,400 5,700 5,900 5,900 45
50 3,700 4,300 4,700 4,800 4,800 50
55 3,400 3,700 3,900 3,900 55
60 2,600 2,900 3,100 3,100 60
65 2,200 2,400 2,400 65
70 1,600 1,800 1,800 70
75 1,300 1,200 75
80 800 700 80
This information is not for crane operation. Operator must refer to the in---cab information for crane operation. Rated lifting capaci-ties shown on fully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
18 5460 (supersedes 5424)---0506---N3
HTC-8690 Link-Belt Cranes
Main Boom Lift Capacity Charts -- Optional32,500 lb Counterweight -- Fully Extended Outriggers -- 360˚ Rotation
(All Capacities Are Listed In Pounds)
Radius(ft)
Boom Length (ft) Radius(ft)38 50 60 70 76.5/80 90 100 110 120 130 140
8 180,000* 8
9 167,100* 9
10 158,300* 152,100* 117,900 89,700 10
12 142,700* 138,700* 108,800 85,000 85,100** 12
15 119,300 121,400 106,500 78,800 78,400** 57,700 15
20 87,600 89,800 90,200 70,300 76,500** 56,200 49,100 42,500 20
25 68,000 70,300 70,800 63,600 70,300** 55,300 45,800 42,500 33,700 29,700 25
30 54,700 57,100 57,600 58,100 58,700 54,500 45,200 38,300 31,200 29,400 24,400 30
35 47,500 49,100 49,400 49,200 48,800 42,500 35,500 30,900 29,100 24,100 35
40 40,500 41,600 41,800 41,600 41,100 38,200 33,400 30,600 28,800 24,000 40
45 34,600 34,900 34,600 34,200 33,700 30,300 29,900 28,600 23,800 45
50 29,300 29,600 29,400 28,900 28,800 27,900 27,800 26,800 23,700 50
55 25,500 25,300 26,000 24,800 24,700 25,300 24,800 23,600 55
60 22,500 22,400 22,800 21,500 22,300 22,000 21,900 22,100 60
65 20,000 20,100 20,000 19,600 19,300 20,000 19,600 65
70 17,700 17,800 17,800 17,700 18,100 17,700 17,400 70
75 15,800 16,500 16,500 16,200 15,800 15,500 75
80 14,200 14,900 14,800 14,500 14,100 13,800 80
85 13,500 13,400 13,100 12,700 12,500 85
90 12,200 12,200 11,900 11,600 11,300 90
95 11,100 10,800 10,500 10,200 95
100 10,100 9,800 9,500 9,200 100
105 8,900 8,600 8,300 105
110 8,100 7,800 7,500 110
115 7,100 6,800 115
120 6,400 6,100 120
125 5,500 125
130 5,000 130
* Special Conditions Or Wire Rope Required** 76.5 EM5 mode
This information is not for crane operation. Operator must refer to the in---cab information for crane operation. Rated lifting capaci-ties shown on fully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
195460 (supersedes 5424)---0506---N3
HTC-8690Link-Belt Cranes
32,500 lb Counterweight -- On Tires -- Stationary -- Boom Centered Over Rear(All Capacities Are Listed In Pounds)
Radius(ft)
Boom Length (ft) Radius(ft)38 50 60 70 80 90 100
10 28,300 10
12 25,400 26,900 12
15 21,800 23,400 24,300 15
20 16,700 18,000 19,300 20,100 20
25 13,000 14,900 15,700 16,100 16,300 25
30 10,100 12,100 13,100 13,500 13,800 13,900 13,800 30
35 9,900 10,900 11,400 11,800 11,900 11,800 35
40 8,000 9,100 9,600 10,000 10,100 10,100 40
45 7,600 8,100 8,500 8,700 8,600 45
50 6,300 6,900 7,200 7,400 7,300 50
55 5,700 6,100 6,300 6,200 55
60 4,800 5,200 5,300 5,300 60
65 4,300 4,500 4,500 65
70 3,600 3,800 3,700 70
75 3,100 3,100 75
80 2,500 2,500 80
85 1,900 85
90 1,500 90
32,500 lb Counterweight -- On Tires -- Pick & Carry (1 mph) -- Boom Centered Over Rear(All Capacities Are Listed In Pounds)
Radius(ft)
Boom Length (ft) Radius(ft)38 50 60 70 80 90 100
10 18,200 10
12 16,000 17,500 12
15 13,200 14,800 15,600 15
20 9,500 11,300 12,200 12,700 20
25 6,700 8,600 9,600 10,000 10,400 25
30 4,400 6,500 7,500 8,000 8,300 8,500 8,500 30
35 4,700 5,800 6,300 6,700 6,900 6,800 35
40 3,300 4,400 5,000 5,300 5,500 5,500 40
45 3,300 3,900 4,200 4,400 4,400 45
50 2,300 2,800 3,200 3,400 3,300 50
55 2,000 2,400 2,600 2,500 55
60 1,300 1,700 1,900 1,800 60
65 1,100 1,200 1,200 65
This information is not for crane operation. Operator must refer to the in---cab information for crane operation. Rated lifting capaci-ties shown on fully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads.
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
20 5460 (supersedes 5424)---0506---N3
HTC-8690 Link-Belt Cranes
39,500 lb Counterweight -- Fully Extended Outriggers -- 360˚ Rotation(All Capacities Are Listed In Pounds)
Radius(ft)
Boom Length (ft) Radius(ft)38 50 60 70 76.5/80 90 100 110 120 130 140
8 180,000* 8
9 167,600* 9
10 158,800* 152,100* 117,900 89,700 10
12 143,600* 138,700* 108,800 85,000 85,100** 12
15 123,700 122,600 106,500 78,800 78,400** 57,700 15
20 91,300 93,500 93,800 70,300 76,500** 56,200 49,100 42,500 20
25 71,000 73,300 73,8