PRODUCT CATALOGUE

FLUID CONTROL

1FLUID CONTROL

With a rich legacy spanning over 116 years, we are immensely proud of

our status as leading manufacturer, merchandiser and distributor of

steel and value added steel products.

Our extensive product portfolio, robust infrastructure and technical

competencies, combined with our continuous improvement initiatives

has solidified our reputation as the pre-eminent supplier of steel on the

African continent.

At Macsteel, we operate through a strategic network of over 40 service

centres, branches and warehouses, enabling us to provide our valued

customers with exceptional levels of personalised service throughout

the entire steel supply chain.

1FLUID CONTROL

Niche focussed business supplying a comprehensive range of fluid control systems.

Macsteel Fluid Control is a key niche focused business which operates throughout various industry sectors. It supplies a comprehensive range of valves, actuators, fluid level gauges, filter systems, valve interlock systems and a full range of steam products including traps, strainers and control valves. Valves supplied range from basic brass gate valves to advanced technical control systems. It supplies carbon and stainless steel pipes, fittings and flanges, steel and secondary piping products and associated products.

Macsteel Fluid Control is the sole franchise holder for Southern Africa of a wide range of well-known product brands.

A major step towards import substitution has been the establishment of a local valve assembly operation.

This Macsteel Business Unit assembles Bermad control valves, Igema liquid and magnetic level gauges and Smith interlock systems.

Macsteel Fluid Control employs highly skilled technical personnel with the expertise, skills and a detailed knowledge of product design and specifications. Its reputable branded products are found in diverse markets, ranging from irrigation and agriculture to petrochemical and nuclear energy.

Macsteel Fluid Control is ISO 9001 certified.

Macsteel Fluid Control

11FLUID CONTROL

ContentsL&T VALVES 1

BUTTERFLY VALVES AND ACTUATORS 2

AMRI BOAX B 2

AMRI ISORIA 2

AMRI KE 2

AMRI DANAIS MT II & DANAIS 150 2

AMRI ACTUATORS MANUAL AND PNEUMATIC 3

NATCO BUTTERFLY VALVES 3

NATCO PNEUMATIC ACTUATORS 3

NATCO ELECTRO PNEUMATIC POSITIONERS 4

NATCO SWITCH PACKS 4

GATE, GLOBE, CHECK & PISTON VALVES 5

AMRI, NATCO WAFER CHECK VALVES 5

BRANDED BRASS AND GUNMETAL VALVES 5

TEROFOX, ANSI GATE, GLOBE & CHECK VALVES 5

NATCO CAST IRON GATE & GLOBE VALVES 5

CYL KNIFE GATE VALVES 6

NATCO RESILIENT SEALED GATE VALVES 6

CONTROL VALVES 7

BERMAD CONTROL VALVES 7

SCHUBERT & SALZER CONTROL SYSTEMS 8

BALL VALVES 10

ENOGAS & NATCO BRASS AND NYLON BALL VALVES 10

NATCO BALL VALVES 10

FIRE SAFE BALL VALVES 10

LEVEL GAUGES 11

IGEMA LIQUID LEVEL GAUGES AND GLASS 11

IGEMA LEVEL GAUGE 11

NATCO LEVEL GAUGES STAINLESS STEEL OR BRASS 11

SPECIALISED EQUIPMENT 12

SMITH FLEXI DRIVE 12

SMITH EASI DRIVE 12

STRAINERS 12

NATCO SIGHT FLOW INDICATORS, CONICAL STRAINERS 12

RUBBER BELLOWS 13

SPECIALISED VALVES (OTHERS) 14

NATCO DIAPHRAGM VALVES 14

STRAHMAN MG LINE BLINDS & SPECIALISED VALVES 14

BALANCING VALVES 14

SAFETY VALVES AND EQUIPMENT 15

SMITH FLOW CONTROL, CASTELL & ELLIS INTERLOCK

SYSTEMS 15

SMITH FLOW CONTROL SPECIAL EQUIPMENT 15

ELMAC FLAME ARRESTERS 15

MOTHERWELL STORAGE TANK SAFETY 15

NATCO SAFETY & RELIEF VALVES 16

ELFAB BURSTING DISCS 16

EXPANDING PLUG VALVES 16

EXPANDING PLUG VALVE 16

STEAM/CONDENSATE 17

ARMSTRONG TRAP MANIFOLDS 17

ARMSTRONG STEAM TRAP 17

ARMSTRONG LIQUID DRAINERS 17

ARMSTRONG AIR VENTS 17

YOSHITAKE PRESSURE/TEMPERATURE REGULATION 17

HUMIDIFIERS 18

HOT WATER SYSTEMS 18

INDUSTRIAL HOT WATER SYSTEMS 18

FILTRATION 19

AMIAD SELF CLEANING FILTERS AND FILTRATION

SOLUTIONS 19

SYNERGY 20

MAC SHOULDER PIPE SYSTEM 21

MAC GROOVE-END PIPE SYSTEM 21

MAC RING-JOINT SYSTEM 22

CABLE-LOCK™ PIPE SYSTEM 22

LULA/LULA-LOCK™ PIPE SYSTEM 23

MAC FLANGED PIPE SYSTEM 23

HVAC PIPING SYSTEM 24

PIPES 25

FITTINGS 26

FLANGES 27

1FLUID CONTROL

L&T VALVES

L&T ValvesGATE, GLOBE & CHECK VALVES

ASME Class 150 - 2500, 15mm - 1800mmAPI 600 | API 623 | API 594 | ASME B16.34 | API 602 | API 603

Application: Process industries: Oil, chemical, petrochemical, refining, pulp and paper, pharmaceutical, mining, food processing and water treatment.

Power Industries: nuclear, fossil fuel (coal and gas), and renewable and district heating.

Upstream and midstream industries: offshore production platforms, LNG Liquefaction and regasification terminals, tankers carriers and tank farms, and ship-building.

BUTTERFLY VALVES AND ACTUATORS

Butterfly Valves and Actuators

AMRI BOAX B

Application: Heating, ventilation, air conditioning, irrigation, industrySize range: 40mm to 200mm - 16 bar 250mm to 1000mm - 10 barConstruction: Disc: Ductile iron or stainless steel Liner: EPDM, high content nitrile Body: Ductile iron Shaft: 13% chromium, stainless steel

AMRI ISORIA

Application: General process industry, water systems, etcSize range: 40mm to 3200mmPressure range: From industry vacuum to 25 barConstruction: Disc: Various including stainless steel, ductile iron, norihard, noridur and others Liner: Various including EPDM, nitrile, carboxylated nitrile, hypalon, viton and others Body: Cast iron, ductile iron and cast steel Shaft: Stainless steel

AMRI KE

Application: Chemical plants with high corrosion and/or erosion applicationsSize range: 40mm to 300mm - Wafer pattern / lugged 350mm to 600mm - U-sectionPressure range: From industry vacuum to 10 barConstruction: Disc, Shaft: Stainless steel and PFA-teflon coated stainless steel Liner: PFA-teflon with elastomer backup, EPDM, nitrile, carboxylated nitrile, hypalon, viton or high temperature silicone rubber Body: Cast iron, ductile iron, cast steel

AMRI DANAIS MT II & DANAIS 150

Application: High performance applications where higher temperatures and pressures are requiredSize range: 50mm to 900mmPressure range: Class 150 (PN20) and Class 300 (PN50)Construction: Disc: Cast iron or stainless steel Body: Cast iron or stainless steel Seats: Metallic, PTFE or elastomer

2FLUID CONTROL

AMRI ACTUATORS MANUAL AND PNEUMATIC

Application: All quarter turn actuator needsSize range: Up to 9000 NmPressure range: Up to 10 bar to operateTemperature range: -40°C to 120°CConstruction: Alloys with various coatingsMounting: ISO base with Namur solenoid connectionsSpecial features: A full complementary range of switches, positioners and auxiliaries available

3FLUID CONTROL

BUTTERFLY VALVES AND ACTUATORS

NATCO BUTTERFLY VALVES

Application: General industry, HVAC and agricultureSize range: 50mm to 1200mmPressure range: 10 bar to 16 barTemperature range: -15°C to 130°CConstruction: Disc: Coated ductile iron or stainless steel Liner: EPDM or NBR Body: Ductile iron Shaft: Stainless steel

NATCO PNEUMATIC ACTUATORS

Application: All quarter turn actuator needsSize range: 16 Nm to 2500 Nm nominalPressure range: Max 10 bar air to operateTemperature range: -150°C to 130°CConstruction: Coated aluminium with coated steel pinionMounting: ISO base and top with Namur solenoid connections

BUTTERFLY VALVES AND ACTUATORS

NATCO ELECTRO PNEUMATIC POSITIONERS

Application: For all modulating control requirementsRange: Suitable for 20-100kPa or 4-20mA signalOptions: Four feedback options Either single or double actingFeatures: Field reversible No pipework changes No extra parts required

NATCO SWITCH PACKS

Application: Mechanical or proximity switches with feedback signalsFeatures: Metal or Plastic coversOptions: Retrofit mounting to suit most quarter-turn actuators

4FLUID CONTROL

5FLUID CONTROL

NATCO BRASS AND GUNMETAL VALVES

Application: Shut off and control in general industry where gates, globes and check valves are usedSize range: 8mm to 100mmPressure range: Up to 40 barConstruction: Brass, bronze (gunmetal)End connections: Screwed or flanged

GATE, GLOBE, CHECK & PISTON VALVES

Gate, Globe, Check & Piston Valves

AMRI, NATCO WAFER CHECK VALVES

Application: Industrial, mining, irrigation, process, chemical, petrochemical industries and municipalitiesSize range: 50mm to 600mmPressure range: Up to PN 250 / ANSI 1500 depending on size and valve selectionTemperature range: -250°C to 538°C

TEROFOX, ANSI GATE, GLOBE & CHECK VALVES

Application: Petrochemical, steam and other high pressure applicationsSize range: 8mm to 600mmPressure range: Up to ANSI 2500Construction: Cast steel, forged steel, cast iron, stainless steel, special alloysEnd connections: Screwed, socket weld, butt weld or flanged

NATCO DUCTILE IRON GATE, GLOBE & CHECK VALVES

Application: Industrial, agricultural, mining and robust applicationsSize range: 50mm to 300mmPressure range: Gate and Check - PN 10 Globe - PN 16Temperature range: -15°C to 130°CConstruction: Body: Cast iron Gate Valves Seat: Cast bronze Globe Valves Seats: Stainless steelOptions: Rising and non-rising spindlesEnd connection: Flanged

GATE, GLOBE, CHECK & PISTON VALVES

CYL KNIFE GATE VALVES

Application: Water, sewage, slurry, paper and pulpSize range: 50mm to 600mm with larger sizes on requestConstruction: Body: Cast iron, cast steel, stainless steel Seals: Metal to metal, metal to elastomer, elastomer to elastomer Blade: Stainless steel or customer requirementsEnd connections: Wafer to suit customer flanges

NATCO RESILIENT SEALED GATE VALVES

Application: Civils and water reticulationSize range: 50mm to 350mmPressure range: 16 barConstruction: Cast iron, SG ironEnd connection: Flanged, spigot, shouldered

6FLUID CONTROL

7FLUID CONTROL

CONTROL VALVES

Control Valves

BERMAD CONTROL VALVES:

Use: Automatic Hydraulic Control valve for; pressure reducing, pressure sustaining, pressure relief, pump control, level control, flow control, Burst control, Solenoid control and Electronic control Air release valves for; potable water, irrigation water, sewage and wastewater.Sizes available: Waterworks/Building and Mining: 40mm - 1200mm (dependent on the series) Irrigation: 15mm - 1200mm (dependent on the series) Fire Protection: 40mm - 300mm (dependent on the series)Pressure range: Varies per series, PN10, PN16, PN25 and PN40 (10 to 40bar)Construction: Varies per Series; Reinforced Nylon, Cast iron, Ductile/SG iron, Cast Steel (WCB), Stainless steel, Exotic materials and Composite MaterialsEnd connections: Flanged, screwed and Victaulic, dependant on the series

CONTROL VALVES

MODEL 7010

Application: Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Angle seat on/off valve 7010Nominal size: DN 8 - 80Nominal pressure: PN 16, PN 40Media temperature: -30°C to +200°C, optional -100°C to +220°CMaterial: Bronze and stainless steel

8FLUID CONTROL

MODEL 7210

Application: Motor valve for on/off- and modulating operation for neutral and aggressive media. Angle seat motor valve 7210Nominal size: DN 8 - 80Nominal pressure: PN 16, PN 40Media temperature: -30°C to +200°C, optional -100°C to +220°CMaterial: Bronze and stainless steelActuation: on/off and control actuation, optional position control and position feedback plus limit switch

MODEL 8038

Application: Fast and high resolution motor valve for control and switching of neutral through to highly aggressive media in process engineering, chemical industries and for plant equipment. Sliding gate motor valve 8038Nominal size: DN 15 - 250Nominal pressure: PN 10 - 100, ANSI # 150 - 600Media temperature: -60°C to +350°C optional -196°C to 530°CMaterial: carbon steel, stainless steel, Hastelloy, special materialPositioner: pneumatic, analogue electro-pneumatic, digital electro-pneumatic, Ex-i version, AS-i bus connectionDead band: ± 0.2%Repeatability: ± 0.1%Stroking speed: adjustable between 4,7 and 35 secondsActuator: high resolution motor actuator for control and switching with stroke monitoring, limit switches and optional fail safe unit

Schubert & Salzer Control Systems’ products can be found in a wide variety of areas within the process industry. Whether it is in the production of chemical or pharmaceutical products, food processing, bottle filling or the production of steel, polymers, paper or solar cells and tires – in short, wherever liquid or gaseous flows need to be controlled.

CONTROL VALVES

9FLUID CONTROL

MODEL 8021

Application: Pneumatic control valve for the control of neutral and aggressive fluids with integrated positioner. Sliding gate control valve 8021Nominal size: DN 15 - 250Nominal pressure: PN 10 - 160, ANSI # 150 - 900Media temperature: -60°C to +350°C, optional -196°C to +650°CMaterial: carbon steel, stainless steel, Hastelloy, special materialPositioner: pneumatic, analogue electro-pneumatic, digital electro-pneumatic, Ex-i version, AS-i bus connection

MODEL 6051

Application: Pneumatic control valve in right angle design with integrated microprocessor positioner type 8049 or as a shut-off valve for applications in pharmaceutic and food industry. Aseptic angle control valve 6051Nominal size: DN 15 - 65Nominal pressure: PN 16Media temperature: -20°C to +135°CMaterial: Stainless steelDiaphragm material: EPDM with PTFE-foilPositioner: pneumatic, analogue electro-pneumatic, digital electro-pneumatic, Ex-i version, AS-i bus connection. Available with pneumatic on/off actuator

MODEL 4040

Application: The ball sector valve especially designed to handle arduous duties, slurries and viscous fluids is suitable for control and isolation. Ball sector valve 4040Nominal size: DN 25 - 300Nominal pressure: PN 10 – 40, ANSI # 150 - 300Media temperature: -60°C to +350°C optional -196°C to 530°CMaterial: stainless steel 1.4408 (CF8M) and 1.4404 (316L) Various seat material combinationsPositioner: pneumatic, analogue electro pneumatic, digital electro-pneumatic, Ex-i version, Motorized

MODEL 7079

Application: Pneumatically operated pinch control valves for the control of granulated, viscous, doughy and aggressive media in demanding applications. Pinch control valve 7079Nominal size: DN 15 - 50Operating pressure: to 6 barMedia temperature: -30°C to +130°CTube material: NBR and EPDM (conforming to FDA), FKM, and morePositioner: pneumatic, analogue electro-pneumatic, digital electro-pneumatic, Ex-i version, AS-i bus connectionType 7078 with pneumatic on/off actuator

10FLUID CONTROL

BALL VALVES

Ball Valves

ENOLGAS & NATCO BRASS AND NYLON BALL VALVES

Application: Water, compressed air, oils, non corrosive fluids and hydrocarbons in generalSize range: 8mm to 100mmPressure range: Up to 50 bar depending on the sizeConstruction: Nickel plated brassTemperature range: -20°C to 150°C

NATCO BALL VALVES

Application: General and process industrySize range: 8mm to 250mmPressure range: 1 piece up to 70 bar 2 piece up to 50 bar 3 piece up to 80 bar Note: pressure depends on size and temperature

Construction: Body: Carbon steel, stainless steel Seats: PTFE 1 piece: screwed 2 piece: flanged 3 piece: screwed and/or socket weld ends 3 way: T port and L port

FIRE SAFE BALL VALVES

Application: Process, chemical, natural gas and petrochemical where firesafe operation is really importantSize range: 15mm to 750mmPressure range: ANSI 150 up to ANSI 1500 DIN PN16 to PN40Construction: Body: Carbon steel, stainless steel, Exotic Materials Ball: Stainless Steel or Exotic Materials Seats: PTFE and other special material on requestEnd connections: Flanged

11FLUID CONTROL

LEVEL GAUGES

Level Gauges

IGEMA LIQUID LEVEL GAUGES AND GLASS

Application: Most applications are catered for in our wide range of liquid level gaugesSize range: Unlimited length as per customer requirementsPressure range: Glass Tube Gauges: Non-hazardous media up to 32 bar Reflex Gauges: Steam (saturated) up to 32 bar Other media up to 160 bar Bi-colour Gauges: Steam (saturated) up to 180 bar. Other media up to 250 bar Transparent Gauges: Steam (saturated) up to 120 bar. Other media up to 250 barEnd connections: As per application requirements

IGEMA MAGNETIC LEVEL GAUGE

Application: These gauges are ideally suited for robust applications where clear indication is required as a result of the media being contained in a sealed chamberSize range: Unlimited length as per customer requirementsPressure range: Up to 150 barTemperature range: Up to 400°CConstruction: Stainless or high nickel alloys, PVDF, PP, PVC as well as PVDF/PFA lined gaugesEnd connections: As per application requirements

NATCO LEVEL GAUGES STAINLESS STEEL OR BRASS

Application: Non-hazardous mediaSize range: Unlimited length as per customer requirementsPressure range: Up to 16 barConstruction: Stainless steel / brassEnd connections: Screwed or flanged

SPECIALISED EQUIPMENT

Specialised Equipment

SMITH FLEXI DRIVE

Application: Problem valve locations which may be in hazardous areas, below water, in confined spaces or in pits and in areas where noxious fugitive emissions prevail, or in out of reach positionsConfigurations: Every Flexi Drive system is designed and assembled according to specific application requirements

SMITH EASI DRIVE

Application: The low-cost alternative to permanent dedicated actuatorsPower options: Electrical Pneumatic HydraulicTorque range: 100Nm to 100 000Nm

STRAINERS

Application: All strainer requirements including Y and T strainersSize range: 6mm to 600mmPressure range: Up to ANSI 900Construction: Carbon steel, stainless steel, bronze and exotic materialsEnd connections: Flanged, butt weld, socket weld and screwed

NATCO SIGHT FLOW INDICATORS, CONICAL STRAINERS

Application: VariousSize range: 15mm to 100mmPressure range: Up to Class 150Construction: Carbon steel and stainless steelEnd connections: Screwed or flanged

12FLUID CONTROL

SPECIALISED EQUIPMENT

RUBBER BELLOWSApplication: The Flexible Rubber Expansion joint is mainly used in the pipeline of water pumps, oil pumps, blowers existing in the field of drainage, petroleum and chemical industry, mineral mountain and heating supply. It can decrease vibration and noise, repair the deformation of piping system with convenient installation.Size: 25mm - 300mm, 300mm - 600mmPressure rating: 16/10 barTemperature range: -20°C - 120°C

13FLUID CONTROL

BALANCING VALVESApplication: For installation on heating and cooling systems. They allow a correct balance between the different branches of a heating/cooling system.Size: 15mm - 300mmPressure rating: 16/20/25 Bar (depending on the model)Temperature range: -10°C - 130°CConstruction: Brass and cast ironEnd connection: Screwed or flanged

SPECIALISED VALVES

Specialised Valves (others)

NATCO DIAPHRAGM VALVES

Application: ‘Weir’ type valves are available for control purposes and ‘straight through’ valves are used for slurries and abrasive applications. With the wide variety of linings and diaphragms available, these valves provide economical solutions in a wide range of corrosive and/or abrasive applicationsSize range: 8mm to 350mmPressure range: Up to 16 barTemperature range: Up to 175°CConstruction: Body: Cast iIron, cast steel or stainless steel Diaphragm: A wide range Body Lining: A wide rangeEnd connections: Screwed, flanged

STRAHMAN MG LINE BLINDS & SPECIALISED VALVESApplication: Chemical, petrochemical and related industries where tight shutoff, zero leakage, free-flowing and non-clogging valves are required with visible proof from blind linesSize range: As per customer specificationsPressure range: Valves: Industrial vacuum to 380 bar Blinds: 25mm to 750mmTemperature range: -200°C to 800°CConstruction: As per customer requirements including special materials

14FLUID CONTROL

15FLUID CONTROL

SAFETY VALVES AND EQUIPMENT

Safety Valves and Equipment

SMITH FLOW CONTROL, CASTELL & ELLIS INTERLOCK SYSTEMS

Application: These unique products provide tangible protection to any client’s investment in plant and equipment as well as enhancing safety thresholds of employee welfare by ensuring that correct operating procedures are followed. The process management system for improved safety in the working environment is based on ‘coded-card’ key interlocks

SMITH FLOW CONTROL SPECIAL EQUIPMENT

Application: Safe remote and local operation with interlocks on actuated motorized, electric, hydraulic and pneumatic valves using: • Key Management Systems with an easy to identify key permit system in a cabinet • Anti Tamper Locks which allow the valve to be locked in any position for manual flow control • Chains, ISO-Loks, Car Seals provide simple non-sequential locking • Explosion Proof Switches • Sequence Control units permit complex variations • Pneumatic Control Valves

ELMAC FLAME ARRESTERS

Application: The accidental ignition of flammable gases or vapours in pipelines and from vent pipes presents a constant threat to plant and personnel. The use of the external measures taken to avoid or minimise the possible consequences.Size range: 15mm to 1200mmConstruction: Housing: Aluminium, carbon steel, stainless steel Elements: Stainless steel 316

MOTHERWELL STORAGE TANK SAFETY

Application: Petrochemical, oil, gas, biogas and water industries tank environment protection equipmentProducts: Pressure relief valves, vacuum relief valves, emergency vents, gauge hatches, tank blankets, floating suction units, slot dip gatches, gas purifiers, flame trap

16FLUID CONTROL

SAFETY VALVES AND EQUIPMENT | EXPANDING PLUG VALVES

Expanding Plug Valves

NATCO SAFETY & RELIEF VALVES

Application: Safety and relief valves for general industrySize range: 15mm to 80mmPressure range: Up to 20 barConstruction: Bronze, stainless steel or ductile ironEnd connections: Flanged or screwed

ELFAB BURSTING DISCS

Application: Bursting disc technology extends from pressure relief in the process industry through to mechanical switching in rocket fuel systemsSize range: 15mm to 600mmPressure range: 0.03 bar to 185 barTemperature range: -200°C to 600°C

EXPANDING PLUG VALVE

Application: All Petrochemical plants, fuel storage or transfer DOUBLE BLOCK and BLEED isolationSize/Pressure range: 2 inch to 24 inch for ANSI 150# rated 2 inch to 14 inch for ANSI 300# rated 2 inch to 12 inch for ANSI 600# ratedMaterials of construction: Body: Carbon steel ASTM-A-216 WCB, Chrome Plated Bore Plug: Carbon steel ASTM-A-216-WCB, electroless nickel plated Stem: Carbon steel ASTM-A-216 WCB, nickel plated Slips: Ductile Iron ASTM-A-536 Slip Seals and O Rings: To suit the media / temp and pressure per application: • Viton, Nitrile, Epichlorohydrin, Ethylenepropylene and Fluorosilicone

17FLUID CONTROL

STEAM / CONDENSATION

Steam / Condensation

ARMSTRONG TRAP MANIFOLDS

Application: The modular answer for drip and tracer line applications which reduces installation costs by including all components - including steam trap, valve and fittings - in an easily filled, centrally located assemblyTypes: Steam distribution Concentrate collectionSizes: 4, 8 and 12 stage units

ARMSTRONG STEAM TRAP

Application: All steam systemsTypes: Inverted bucket, controlled disc, thermostatic, bimetallic, differential condensate, controller, float and thermostatic, thermostatic water, clean steam thermostatic, superheated

ARMSTRONG LIQUID DRAINERS

Application: Draining of heavy liquids from gases or light liquids (dual gravity drainers)Pressure range: 0-1800 psig (0-124 Bar) or specific gravity down to 0.40Types: See available types in air vents below

ARMSTRONG AIR VENTS

Application: Remove gases from liquids and noncondensable gases from steam systemsPressure range: 0-1800 psig (0-124 Bar) or specific gravity down to 0.40Types: Pulysulfone see-through, free floating lever, high leverage, thermostatic, fixed pivot

YOSHITAKE PRESSURE/TEMPERATURE REGULATION

Application: Safe efficient management of steam, air and liquid systems by pressure reducing valves and temperature regulators which maintain constant pressure or temperature for process controlTypes: Direct acting, pilot operated

18FLUID CONTROL

STEAM / CONDENSATION

HUMIDIFIERS

Application: All industries that require controlled humidityTypical industries: Hospitals, bottling plants, fruit or tobacco drying plantsTypes: Electric and pneumaticSizes: To suit the control conditions of the customerAccessories: Temperature control

INDUSTRIAL HOT WATER SYSTEMS

Application: Leading -edge equipment and technology to fulfill your most exacting demands for performance, efficiency, safety, compliance and energy savings Hot water for industry mobile thermal utilitly pods for process industry. Water temperature control. Hose stations.

HOT WATER SYSTEMS

Application: All hot water temperature conditioning applicationsTypes: Flo-Rite-Temp instantaneous water heaters Rada thermostatic mixing valves Heat transfer packages Dynafluid 2000 - steam & water mixing valve Dynafluid 3000 - hot & cold water mixing valve

19FLUID CONTROL

FILTRATION

FiltrationAMIAD SELF CLEANING FILTERS AND FILTRATION SOLUTIONS

Application: Oil and gas, waste water, general industry, municipal and marine, cooling water, injection water, process water, pre-filtration to membranes, water polishing, potable water, desalination and ballast waterFiltration degree: From 3500 micron to 2 micronSize / flow / pressure rating & materials of construction: Customised Solutions Tailor made to meet and Challenge and suit the onsite requirements and working conditions as per system design

20FLUID CONTROL

The unification of Synergies augmenting Macsteel Fluid Control’s already extensive range of carbon and stainless steel pipes, fittings and flanges to encompass our full range of piping systems in various coatings and linings including galvanising, painting, rubber lining, cement mortar lining, denso wrapping, etc to meet customers’ needs.

• Mac Shoulder pipe system• Mac Groove-ended pipe system/Klambon System• Mac Ring-joint system• Cable-Lock™ pipe system• Lula/Lula-Lock™ pipe system• Mac flanged pipe system• HVAC piping system

Fluid Control

21FLUID CONTROL

MAC SHOULDER PIPE SYSTEM | MAC GROOVE-END PIPE SYSTEM

Mac Shoulder Pipe SystemShoulder-ended steel pipes, fittings and couplings to SANS 815-1

• The shoulder-ended system is considered flexible, where certain angular and axial movement takes place within the jointing mechanism• Pipe size range: 50NB to 300NB• Maximum working pressure: up to 25 Bar• Light and easy to install• SATAS permit number: 221.6/1 to apply 815-1 mark• Full range of fabricated steel fittings - Bends 45º, 90º - Equal Tees 45º, 90º - Unequal Tees 45º, 90º - Elbows 45º, 90º - Blank ends - Adjustable bends - Adaptors - Reducers - Setting pieces 5º, 10º, 22.5º

Mac Groove-Ended Pipe System/Klambon System

Groove-ended steel pipes, fittings and couplings to SANS 815-2

• The groove-ended system will allow for controlled lateral pipe movement, including expansion, contraction and limited deflection• Pipe size range: 50NB to 300NB• Pressure ratings up to 69 Bar depending on joint configuration• Three to five times faster to install than welding on site• Full range of fabricated steel fittings - Bends 45º, 90º - Equal Tees 45º, 90º - Unequal Tees 45º, 90º - Elbows 45º, 90º - Blank ends - Adjustable bends - Adaptors - Reducers - Setting pieces 5º, 10º, 22.5º

Ring-ended fabricated pipes and fittings

Roll groove-ended fabricated pipes and fittings

Full range of fabricated roll and cut groove-ended pipes and fittings available

Mac Shoulder cast couplings

Stub-ended fabricated pipes and fittings

Cut groove-ended fabricated pipes and fittings

• Cable-Lock™ uses the same tried and tested socket system used in the plastic pipe systems, with the addition of the retaining or ‘flex wire’ incorporated in front of the seal to ‘lock’ the two pipes together• Cable-Lock™ pipe is suitable for above and below ground installations• Pipe size range: 50NB to 250NB• Maximum working pressure: up to 25 Bar

Easy to assemble and dis-assembly. Use pullingtool for big OD pipes

Full range of fabricated fittings available

22FLUID CONTROL

MAC RING-JOINT SYSTEM | CABLE-LOCK™ PIPE SYSTEM

Mac Ring-joint SystemRing Joint System: pipes, fittings and couplings

The Shurjoint® R88 ring joint piping system is a non-grooved mechanical pipe joining method and an excellent alternative where pipe is difficult to groove or when grooving, flanges or welding is not the preferred method.• Pipe size range: 350NB to 650NB• Maximum working pressure: up to 28 Bar, depending on the joint configuration• Wall thickness and pipe integrity not compromised on ring joint system as with roll grooving• Round steel rings: SAE J403 / ANSI 1020 or stainless steel• Ductile iron housings: ASTM A536 Gr. 65-45-12 / A395 Gr. 65-45-15• Rubber gasket: EPDM pr Nitrite• Heavy duty bolts and nuts: Zinc plated ASTM A183 Gr. 2 / ASTM A563• Full range of fabricated ring joint fittings are available• The pipe is supplied with a factory welded ring into each pipe end, galvanised or coated as per requirements

Cable-lock™ Pipe System

Factory suppliedweld rings

Gasket

Housing segment

Weld ring

Bolts & nuts

For installation, mount the rubber gasket over the pipe ends, place coupling segments overthe gasket and fasten the bolts and nut.

23FLUID CONTROL

LULA/LULA-LOCK™ PIPE SYSTEM | MAC FLANGED PIPE SYSTEM

Lula/Lula-Lock™ Pipe SystemSteel pipes rolled to plastic pipe sizes with integral locked socket

• Lula pipe system is totally interchangeable• Lula-Lock™ pipe system is the same socket with the addition of the retaining wire incorporated in front of the seal to ‘lock’ the two pipes together• Lula/Lula-Lock™ pipe systems can be laid above or below the ground - no special backfill required• Ideal for rocky areas, river or bridge crossings - no damage through exposure to UV• Less likely to be subjected to illegal connections• Full range of fabricated Lula fittings available, including reduction adaptors between Lula and Cable-Lock™ male and female ends• Pipe size range: 63mm to 200mm OD• Maximum working pressure: up to 25 Bar

Fabricated steel pipes and fittings to SANS 1476

Mac Flanged Pipe System

• Pipe size range: 50NB to 100NB• Maximum working pressure of system is that of max working pressure of flange

A

A

R Rubber lined flanged pipes

24FLUID CONTROL

HVAC PIPING SYSTEM

Supply of Steel Pipe Systems for Heating, ventilation, and air conditioning (HVAC)

Together with Shurjoint, we can offer systems to meet your needsin building service piping. The basic systems include chilled water, condenser water, hot water, potable water and compressed air.

Shurjoint Grooved Piping Systems are a proven alternative to welded systems which offer significant savings on installation time and provide a consistent connection quality. No flame is needed for joining pipe and this results in improved jobsite safety.

HVAC Piping System

Grooved couplings Grooved fittings

HDPE couplings Grooved valves

Plain ended uncoated Black screwed and socketed Red screwed and socketed

Galvanised screwedand socketed

Galvanised exacts

Stand pipesGalvanised screwedand capped

25FLUID CONTROL

PIPES

SANS 62 - Carbon Steel

SANS 719 - Welded Carbon Steel

Stainless Steel PipeWelded and seamless - ASTM A312 304L and 316L

Other sizes, schedule/wall thickness and lengths available on application or request

Seamless Carbon SteelASTM A106, API 5LB, ASTM A53, ASME SA106

Other sizes, schedule/wall thickness and lengths available on application or request

26FLUID CONTROL

FITTINGS

EN10241 - Wrought Steel Screwed Fittings EN10242 - Malleable Cast Screwed Fittings

JIS B2311-C - Carbon Steel Welded Butt-Weld Fittings ASTM A234 WPB - Carbon Steel Seamless Butt-Weld Fittings

Grooved Fittings and Couplings (low pressure)

ASTM A403 WPB - Stainless SteelWelded Butt-Weld Fittings

ANSI: B16.11 Threads to ANSI B1-20-1 Forged Carbon Steel Fittings

ISO 4144Stainless Steel 316 150lb Screwed Fittings

Other sizes, schedule/wall thickness and lengths available on application or request

27FLUID CONTROL

FLANGES

Wrought Steel, Mild Steel and Galvanised Backing Flange are to dimension specs EN1092-1: 2018, SANS 1123: 2011, BS10: 1962

ASTM / ASME A/SA240Plate Flanges - Stainless Steel Plate Flanges

Forged Flanges to ANSI B16.5

August 2021

BOKSBURG (Divisional Head Office)

7 Brook Rd, Lilianton, BoksburgPO Box 14585, Wadeville, 1422

Tel: 011 383 4000Fax: 086 679 0023

BETHAL

13 Vuyisele Mini St, 5 Brasslink, BethalPO Box 929, Bethal, 2310

Tel: 017 647 9340Fax: 017 647 5653

CAPE TOWN

Unit A2-A3 Steel Park, Symphony Way,Belville South, Cape Town

PO Box 582, Kasselvlei, 7533Tel: 021 959 7960Fax: 086 679 0327

DURBAN

Unit 6, Travertine Crescent, BriardenePO Box 201729, Durban North, 4016

Tel: 031 581 7803Fax: 086 644 3752

RICHARDS BAY

Unit 3A, Umiton Park, Brasslink, Richards BayPO Box 1549, Richards Bay, 3900

Tel: 035 751 3900Fax: 035 751 3905

PIPES, FITTINGS & FLANGES

3 Tielman Roos St, Germiston SouthPO Box 14252, Wadeville, 1422

Tel: 011 383 4000

info@macsteel.co.zawww.macsteel.co.za