Upload
vunhi
View
218
Download
0
Embed Size (px)
Citation preview
B E N E F I T S A N D C U S T O M E R V A L U E
Benefits • 3o angle on each coupling
• Quicker to assemble than alternative fittings
Customer value • Cost efficient curving of the pipeline• Minimized construction & design work
Areas of use • Commonly used for water, irrigation, pressure sewer, penstocks and many other applications.
Other couplings from Flowtite
• Pressure Coupling• Biaxial Lockjoint• Sewer Coupling
T E C H N I C A L D ATA
Operating pressure Up to 16 bar
Main Materials Glassfibre Reinforced Plastic (GRP)
Estimated lifetime More than 150 years
Operating temperature -50 oC - +50 oC
Gasket design Reka
Gasket material EPDM
Estimated gasket lifetime 150 years
Diameter range (DN) Up to 4000 mm
Assesment of conformity CEN TS 14632
International Pipe Standards ASTM D3262, ASTM D3754, ASTM D3517 AWWA C950ISO 10639, ISO 10467EN 1796, EN 14634
FLOWTITEANGLED COUPLINGCOUPLING FOR INCREASED ANGULAR DEFLECTIONS UP TO 3ο, WITHOUT THE USE OF THRUSTBLOCKS.
The Angled Coupling is designed for pressure mains up to 16 bar. It is based on the design of the trusted Flowtite Pressure Coupling, a design that have been used on all five continents of the world for more than 40 years. The expected lifetime of Flowtite Angled Couplings is more than 150 years.
www.flowtite.com
F L O W T I T E A N G L E D C O U P L I N G
2 0 1 5 - 0 8 - 1 9 R e v 3
Reduces amount of bends and thrustblocks•
Reduced cost on fittings and bends• Fits the following pipes Pressure pipe and sewer pipe
Note! DN 1300 upwards requires adjustment of the pipe spigots.
Minimum radius of curvature 57 m at 3 m pipe lengths
Radius of Curvature at Standard Pipe Lengths
Pipe Length
Radius of curvature
3 m 6 m 12 m
57 m 115 m 229 m