Embed Size (px)
its contaminants and keeps it reusable or recyclable. The blow-molded liner has an ultrathin lip, which prevents leakage between the insert and drum, while providing easy drum-lid closure.
Circle 405 on the reader service card
Presence and Thickness Tester EC/ Technology Inc. fast Rutherford, NJ.
The EC1 Model QC-100 Surface- Scan measures presence and thickness of difficult-to-detect finishes such as organic solderability preservative (OSP) coatings for plated thru-holes and surface-mount pads. The Surface- Scan uses a SERA-based technology that can detect presence and differ- ences in specific OSPs on a surface as well as measure their thickness.
Circle 406 on the reader service card
HVLP Spray Gun ITW DeVilbiss, An Illinois Tool Works Co. Maumee, Ohio
The EGHV Touch-Up Maximum Performer spray gun features a long, tapered fluid needle and a top-mounted trigger. The gun weighs only 7.5 ounces and is ideal for spraying both waterborne and solvent-based coat- ings. Optional accessories include an 8-oz solvent-resistant polyethylene cup and 2-quart remote cups in aluminum or stainless steel.
Circle 407 on the reader servlce card
Flow Transmitters George Fischer Inc. Tustin, Calif.
Signet 8510/8511 Compak flow transmitters can be easily integrated with Roto-X style insertion paddle
r MARCH SEAL=LES MAGNETlC DRIV
SELF-PRIMING CENTRIFUGAL PUMP
For applications where graviky feed is not availa.ble
H SUCTION LIFT CAPABILITY Suction capability of ‘/Cl fet?t OF 10 FEET, 57 FOOT HEAD with all the advantages of 3
n SELF-PRIMING CHAMBER seal-less magnetic &uolecl centrifugal pump: wlcie open
fl NO OPENINGS IN SIDE OF clearances, no surface-to-
TANK OR OTHER FLUID surface contact, no seal wear,
CONTAINER NECESSARY power robbing friction, or leakage through the seal.
n ALL POLYPROPYLENE CONSTRUCTION
The March line includes over 200 standard pumps with capacities from 2 to 270 GPM. Write, phone, or fax for catalog.
1819 Pickwick Avenue Glenview, Illinois 60025 1847 729-5300 Fax 1847 729-7062
Circle 058 on reader information card
wheel flow sensors for a complete stand-alone system. The transmitters provide a 4 to 20 mA signal from a range of Signet flow sensors. Fully sealed, NEMA 4X electronics elimi- nates the need for potentiometers or test equipment and allows for simple set-up and calibration. The 8510 can be used for any flow range from 1.0 to 20 fps and the 85 11 for any flow range from 0.3 to 20 fps.
Circle 408 on the reader service card
METAL FINISHING l JANUARY 1997 77