Upload
vuongdiep
View
214
Download
0
Embed Size (px)
Citation preview
Page 1 of 9
Item Body Capacity Separation between supports
Radius uppersupports , mm
Flexural Fixtures 3 Points
PFb-3P-150/2.5 Aluminum 2.5 kN 4-150 mm
1 support of 1 - 1.5 - 2 - 3.2
ó 5 mm de radius to chooser *
PFb-3P-300/10 Steel 10 kN 4-190 mm
PFb-3P-420/10 Steel 10 kN 4-420 mm PFb-4P/2.5 Aluminum 2.5 kN 4-150 mm PFb-4P/10 Steel 10 kN 4-150 mm PFb-4P-300/10 Steel 10 kN 4-300 mm
Flexure Bending Fixtures PFb 3 & 4 Points - 2,5 kN y 10 kN (low capacity)
2,5 kN Aluminum 10 kN Steel
Flexural Fixtures 4 Points
The 3 Point Bending Test Devices are supplied including 1 set of 3 supports of the chosen radius (see specifications below) The 4 Point Bending Test Devices are supplied including 1 set of 4 supports of the chosen radius (see specifications below)
Radius lowersupports, mm
Combinations 2 radiuss p/support (R1,5 y R2,5 mm), (R2 y r3 mm)(R3,2 y R5 mm)**
* The upper supports have individual radios
** The lower supports have 2 radius, are reversible with different radius of support on each side
The sample to be tested is placed on the supports of the lower area of the bending test device and then the 3 or 4 point flexural strength test is carried out.
- RTemperature range -70ºC to 180ºC
PFb-FU 2-3
PFb-FOR2
PFb-AR1.5-R2.5 -AR2-R3 -AR,.3-R5 -R4-R5
Suitable for accurate bending tests of small samples
10 kN 4-290 mm
PFb-3P-150/10 Steel
TECHLAB SYSTEMS, S.L.Head Office: Txatxamendi 10, Pol. 110 – 20100 Lezo – SPAIN
US Office: 1549 Ardmore Ave. –Itasca, Illinois 60143 USA www.metrotec.es
Elements: Item. Length Scope of supply
PFb/B200 200mm 1
PFb/B300 300mm 1
PFb/430 430mm 1
Item.
Lower bar support for:
Upper bar supportfor :
Radios, mmAlcance suministro
PFb/AR…
Combinations Radius (AR - R): 1.5 y 2.5, 2.0 y 3.0 2.0 y 5.0 3.2 y 5.0 4.0 y 5.0
1 Par
PFb/CR….
0.5 1 2 3.2 5 10
1 Par
PFb/AX 1.5-2.5, 2.0-3.0 2.0-5.0 3.2-5.0 4.0-5.0
1 Par
PFb/CX 4 Point Flexural Fixtures
Only 1 Radius (AR): 0.5 1 2 3.2 5 10
1 Par
PFb/CWX Articulated Rollers Only upper anvil for
the 3 Points Flexure Fixtures
1.0 1.5 2.0 3.2 5.0
1 Par
PFb/CN Smooth support for glass testing
For Rollers of Ø 1- 3.2mm 1 Par
PFb/CWM Flat moveable for glas 1 Par
PFb/CWN Plain bearing with rocker shaft and stop support 3
mm high 1 Par
Page 2 of 9
Lower support:
3 point device
4 point device
4 Point Flexural Fixtures
Only 1 Radius (FOR):
Suitable for: 3 Points Flexural Fixtures 4 Points Flexural Fixtures
Flexure Bending Fixtures PFb 3 & 4 Points - 2,5 kN y 10 kN (low capacity)
TECHLAB SYSTEMS, S.L.Head Office: Txatxamendi 10, Pol. 110 – 20100 Lezo – SPAIN
US Office: 1549 Ardmore Ave. –Itasca, Illinois 60143 USA www.metrotec.es
3 point device
4 point device
Suitable for: 3 Points Flexural Fixtures 4 Points Flexural Fixtures
Additional anvil for the 3 Points Flexure
Fixtures
Combinations Radius(AR):
Combinations Radius (AR - R):
Rollers for PFb/X:
Yunques superiores Item Radios, mm Alcance del suministro
PFb/OR..
Un solo Radio (FR):
1.0 1.5 2.0 3.2 5.0
1 Pieza
PFb/oX2 For rollers of Ø 1- 3.2mm 1 Pieza
PFb/oX8 For rollers of Ø 4- 12.7mm 1 Pieza
PFb/oWXAxis with
interchangeable roller balance
For rollers of: 1,2,3,4,5,6, 6.35, 8, 10, 12, 12.7 mm Ø
1 Pieza
Item Description Scope of supply:
PFb/D…-3P
1 additional set of 3 rollers withX= 1,2,3,4,5,6, 6.35, 8, 10, 12, 12.7 mm Ø 3 Rollers
PFb/D…-4P
1 additional set of 4 rollers withX= 1,2,3,4,5,6, 6.35, 8, 10, 12, 12.7 mm Ø
4 Rollers
Page 3 of 9
Only upper anvil for the 3 Points Flexure
Fixtures
Only upper anvil for the 3 Points Flexure
Fixtures with interchangeable rollers
Only upper anvil for the 3 Points Flexure
Fixtures with interchangeable rollers
Flexure Bending Fixtures PFb 3 & 4 Points - 2,5 kN y 10 kN (low capacity)
TECHLAB SYSTEMS, S.L.Head Office: Txatxamendi 10, Pol. 110 – 20100 Lezo – SPAIN
US Office: 1549 Ardmore Ave. –Itasca, Illinois 60143 USA www.metrotec.es
PFb/CWXD5Flexure Fixture wit interchangeable rollersand aticulated bearings.
Includes 1 set of rollers the standard supply
Here with rollers of 5mm
Accessories for PFb-XW:
Item Body Capacity Separa.supports Roller diameters, mm
Flexural Fixture3 Points
PFb/XW Aluminum 2.5 kN 4-150 mm
1, 2, 3, 4, 5, 6, 6.35, 8, 10, 12, 12.7
PFb/XW-St Steel 10 kN 4-150 mm PFb/XW-300-St Steel 10 kN 4-300 mm PFb/XW-4P Aluminum 2.5 kN 4-150 mm PFb/XW-4P-St Steel 10 kN 4-150 mm PFb/XW-300-4P-St Steel 10 kN 4-300 mm
Item. Lower bar support for:
Upper bar support for :
Supply
PFb-CWXFor:3 Point Bending Device or3 Point Bending Device
4 Point Flexure FixtureFor the rollers with 1,2,3,4,5,6, 6.35, 8, 10, 12, 12.7 mm Ø
1 Par
Page 4 of 9
Radius, mm
PFb/FWX
PFb/CWX
TECHLAB SYSTEMS, S.L.Head Office: Txatxamendi 10, Pol. 110 – 20100 Lezo – SPAIN
US Office: 1549 Ardmore Ave. –Itasca, Illinois 60143 USA www.metrotec.es
Flexural Fixture4 Points
Flexure Bending Fixtures PFb 3 & 4 Points - 2,5 kN y 10 kN (low capacity)
PFb/AX-F5x150
Wide support rollers, to test
samples easy to bend
PFb/AX
Interchangeable rollers, to test
samples 2 sizes prisms
PFb/CWR1Z -S3
Smooth supports, for small distances,
with rolling
PFb/CWR1Z-H80-S3
Smooth support for small distances with rollingHere it is possible the installation of a small displacement transducer inductive, in the area underneath rocker
PFb/CWXD4-GAf159
Devices with interchangeable rollers.
For example for testing of Flex 4 points
on test pieces of glass-ceramic
PFb/DF-AL (Aluminio)PFb/DF-ST (Acero)
1 EXTRA - Bending beam including 2xPFb/AR Convert an existing 3-point bending device to a 4-point bending device.
Available in aluminium or steel
PFb-DF-ALPFb-DF-ST
Page 5 of 9 TECHLAB SYSTEMS, S.L.
Head Office: Txatxamendi 10, Pol. 110 – 20100 Lezo – SPAIN US Office: 1549 Ardmore Ave. –Itasca, Illinois 60143 USA
www.metrotec.es
Flexure Bending Fixtures PFb 3 & 4 Points - 2,5 kN y 10 kN (low capacity)
Soluciones especiales a medida
PFb/4P-CWL-D5
Device Fexion to 4 points with rocker wheels and swivel(needle bearings)
PFb/4P-CWXDx180
Page 6 of 9
Flexure Bending Fixtures PFb 3 & 4 Points - 2,5 kN y 10 kN (low capacity)
TECHLAB SYSTEMS, S.L.Head Office: Txatxamendi 10, Pol. 110 – 20100 Lezo – SPAIN
US Office: 1549 Ardmore Ave. –Itasca, Illinois 60143 USA www.metrotec.es
PFb
PFb/B300--4P-CWR5x170
PFb/4P-CWXD8-iTH1-AfDP10s iTH1
Camera adaptor thermal tests at
different temperatures, with
inductive sensor
Page 7 of 9
Flexure Bending Fixtures PFb 3 & 4 Points - 2,5 kN y 10 kN (low capacity)
TECHLAB SYSTEMS, S.L.Head Office: Txatxamendi 10, Pol. 110 – 20100 Lezo – SPAIN
US Office: 1549 Ardmore Ave. –Itasca, Illinois 60143 USA www.metrotec.es
PFb
PFb/4P-CWXD15x180
PFb/CWXD4 iTH1 Support piece for installing an internal extensometer 8mm
Page 8 of 9
Flexure Bending Fixtures PFb 3 & 4 Points - 2,5 kN y 10 kN (low capacity)
TECHLAB SYSTEMS, S.L.Head Office: Txatxamendi 10, Pol. 110 – 20100 Lezo – SPAIN
US Office: 1549 Ardmore Ave. –Itasca, Illinois 60143 USA www.metrotec.es
PFb
PFb/CWXD4-iTH2 Part support for balancing, to adapt an external extensometer
PFb/CR01 Small Radio Supports 0.1mm
Page 9 of 9
Code 2848Adapter (with balancing) for the placement of LVDT to Flexure Bending Test Device according to ISO 178 standards...
Flexure Bending Fixtures PFb 3 & 4 Points - 2,5 kN y 10 kN (low capacity)
TECHLAB SYSTEMS, S.L.Head Office: Txatxamendi 10, Pol. 110 – 20100 Lezo – SPAIN
US Office: 1549 Ardmore Ave. –Itasca, Illinois 60143 USA www.metrotec.es