Embed Size (px)
Citation preview
Dacon Inspection Services Co.,Ltd. 78/4 Moo 6, Sukhumvit Road, Ban Chang, Rayong, 21130 THAILANDPhone: +66 38 880788 I Fax: +66 38 880727 I Email. [email protected]
www.dacon-inspection.com
FOR ALL YOUR INSPECTION NEEDS
FLARE STACK INSPECTION
Dacon Inspection Services is a pioneer in providing
approved Level 3 and Level 2 personnel who are
Dacon Inspection Services the no.1 choice for many of the plant operators here in the region.
a Flare of maximum height of 250 meter.
Typical Scope of Work for High and Low Pressure Flare
• 100 % Visual Inspection of Flare Tip and Flare stack by using Rope Acess.• • Visual Inspection for CUI for the insulated piping.• Bolt Torque Testing at random locations.• UT Flaw detection for the weld joints at selected locations.• ernals if access point is available.• on.• Hardness measurements at the random locations.• MPI of T Joints at random location for the weldments on the Flare stack• Metallographic Replica Test for the Flare Tips at random locations• Inspection of Guy wires to identify the ropes for Tensioning, Creeped and Elongated.• DPT of selected brackets, tie rods and buck stays.• 100 % DPT of weld joint at the Flare Tip.• Job Safety Analysis for each method.• personnel under the supervision of IRATA level 3.
www.dacon-inspection.com
