Upload
buitram
View
246
Download
4
Embed Size (px)
Citation preview
FIXED STEEL LADDERS
Cotterman Co.Division of Material Control, Inc.
P.O. BOX 168130 SELTZER RD.
CROSWELL, MI 48422
NOW• FOUR MANUFACTURING
LOCATIONS TO SERVE YOUCALIFORNIA, MICHIGAN,
GEORGIA AND TEXAS• 8 A.M. - 5 P.M., MON. THRU FRI.
(eastern standard time)• 810-679-4400 • FAX 810-679-4510
• TOLL FREE 800-5-LADDER
BULLETIN FL-219
SIDE-STEP AND WALK-THRU
WELDED STEELDOCK LADDERS
SEE PAGE 4
NEW!
MODULAR SERIES M
• Easier to Install
• Reduces Freight Damage
* ***
POWDERCOATEDTOUGHTM
FIXED STEEL LADDERS – SERIES F AND SERIES Mwithout safety cages. OSHA requires safety cages on ladder heightsexceeding 20'. Separate cages are offered for updating older ladders tocurrent safety standards. All Cotterman fixed ladders meet or exceedOSHA 1910.27 and 1926.1053 standards.
Cotterman fixed steel ladders are designed for use where safe, solid verti-cal climbing access is required. Series F and Series M modular fixed steelladders are available with and without walk-thru handrails at the top land-ing surface. Standard fixed and walk-thru models can be used up to 20'
SERIES F FIXED LADDERS: Ladders are heavyduty one-piece welded assemblies.SERIES M MODULAR FIXED LADDERS:Ladders are heavy duty sub-assemblies, nosection is greater than 7' in length.
CONSTRUCTION FEATURES:• Side members are 1/4"x2"x2" steel angle.
Climbing rungs are 3/4" corrugated steelround rungs space on 12" centers. Stand-offbrackets are 7".
• Gray powder coat finish is standard color,yellow available.
FIXED LADDERS WITH SAFETY CAGES:Standard fixed steel ladders are combined withsafety cage protection. They are available in 10'through 29' sizes and are ideal for hatch-way orside step landing access.
CAGE FEATURES:• OSHA design safety cages have flared bot-
tom opening for easy entry.• Left or right side step access cage designs
are available at no charge.• Cage begins 7' from bottom of ladder.• Gray powder coat finish, yellow available.
FIXED LADDER WITH WALK-THRU HANDRAILS:Ladders are designed for applications where safelanding access is required. They are one-piecewelded assemblies for use in applications lessthan 20' in vertical height.
CONSTRUCTION FEATURES:• Side members are 1/4"x2"x2" steel angle. 3/4"
corrugated steel round climbing rungs on 12"centers. Stand-off mounting brackets are 7".
• Walk-thru handrails extend 42" above landingsurface. Mounting brackets included.
• Welded one-piece, gray powder coat finish,yellow available.
FIXED LADDER WITH WALK-THRU HANDRAILSAND SAFETY CAGES:Designed for safe landing access and availablefrom 10' to 29'. Cages and walk-thru handrailsextend 42" above landing surface.
CAGE FEATURES:• Safety cages are designed to OSHA specifi-
cations with flared bottom opening for easyentry.
• Cage begins 7' from bottom of ladder.• Gray powder coat finish, yellow available.
2. 3.
Cotterman fixed steel ladder acces-sories are designed to provide anadditional measure of safety orsecurity for any fixed steel ladder.
STANDOFF LANDINGPLATFORM: Standoff land-ing platforms with offset cagedladders are required by OSHAStandard 1910.27 at 30' maxi-mum height intervals. Theserugged, pre-engineered plat-forms are constructed with leftor right entries as required.
OPTION SP . . . . . . . .Shipping wt. 153 lbs.
SECURITY LADDERGUARD: The ladder guard ismounted directly over the lad-der climbing rungs to preventunauthorized use. It is avail-able in either 6' or 8' lengths.The guard ha a one piecepiano hinge, and is furnishedwith lock-open and lock-closed hasps.OPTION LG-6 . . .Shipping wt. 130 lbs.OPTION LG-8 . . .Shipping wt. 148 lbs.
SECURITY CAGEENTRY GATE:The cage security gateis designed to preventunauthorized entry intothe bottom of the laddercage. Doors have lock-able hasp for completesecurity.
OPTION CG . .Shipping wt. 31 lbs.
SAFETY CHAINATTACHMENT:The safety chain attach-ment is used on thewalk-thru handrails toprevent accidental exitfrom the top landingsurface.
OPTION D3 . . .
SERIES M - Modular Fixed LadderConstruction
7"
6"
13/32"HOLES (4)3" APART
1" DIA.11 GA.TUBING
6"
123/4"
32"
28"
40°
321/2"
SERIES Fconstruction
features
32"
28"
40°
321/2"
16"
191/4"24"
SAFETYCHAINOPTIONAL
9/16"DIA.
HOLE
40"123/4"
42"
28" 7"
ACCESSORIES
SPECIFICATIONS STANDARD WITH CAGE
OVERALLLENGTH
LENGTH:TOP TOBOTTOM
RUNGNO.
RUNGS
SERIES“F”
MODELNO.
SHPG.WT. PRICE
SERIES “M”
MODELNO.
SERIES “F”
MODELNO.
SHPG. WT. PRICE
OSHA NOTE:Although not required by OSHA, safety caging is
offered on 11 thru 20 rung models.
OSHA NOTE:Fixed ladder heights
exceeding 20' arerequired to
have safety caging.
OSHA NOTE: Heights exceeding 30' require a standoff platform (see option model SP)
3'3"4'3"5'3"6'3"7'3"8'8"9'3"10'3"11'3"12'3"13'3"14'3"15'3"16'3"17'3"18'3"19'3"20'3"
21'3"22'3"23'3"24'3"25'3"26'3"27'3"28'3"29'3"
SHIPPING NOTE: All 15 thru 28 rung Series F models with cages ship in 2 sections. All 29 and 30 rungmodels ship in 3 sections.
HOT DIP GALVANIZED FINISH OR STAINLESS STEEL CONTSTRUCTION CAN BE QUOTED.
3'4'5'6'7'8'9'10'11'12'13'14'15'16'17'18'19'20'
21'22'23'24'25'26'27'28'29'
456789101112131415161718192021
222324252627282930
F4SF5SF6SF7SF8SF9SF10SF11SF12SF13SF14SF15SF16SF17SF18SF19SF20S
-
3543526068778896105113122130139150158167175
-
M11SCM12SCM13SCM14SCM15SCM16SCM17SCM18SCM19SCM20SCM21SC
M22SCM23SCM24SCM25SCM26SCM27SCM28SCM29SCM30SC
F11SCF12SCF13SCF14SCF15SCF16SCF17SCF18SCF19SCF20SCF21SC
F22SCF23SCF24SCF25SCF26SCF27SCF28SCF29SCF30SC
156182197213268282298316342357373
388414429444471486501559575
SPECIFICATIONS WALK-THRU RAIL WITH WALK THRU & CAGE
OVERALLLENGTH
LENGTH:TOP TOBOTTOM
RUNGNO.
RUNGS
SERIES“F”
MODELNO.
SHPG.WT. PRICE
SERIES “M”
MODELNO.
SERIES “F”
MODELNO.
SHPG. WT. PRICE
OSHA NOTE:Although not required by OSHA, safety caging is
offered on 8 thru 20 rung models.
OSHA NOTE:Fixed ladder heights
exceeding 20' arerequired to
have safety caging.
OSHA NOTE: Heights exceeding 30' require a standoff platform (see option model SP)SHIPPING NOTE: All 15 thru 25 rung Series F models with cages ship in 2 sections. All 26 thru 30 rung
models ship in 3 sections.HOT DIP GALVANIZED FINISH OR STAINLESS STEEL CONTSTRUCTION CAN BE QUOTED.
3'4'5'6'7'8'9'10'11'12'13'14'15'16'17'18'19'20'
21'22'23'24'25'26'27'28'29'
456789101112131415161718192021
222324252627282930
F4WF5WF6WF7WF8WF9WF10WF11WF12WF13WF14WF15WF16WF17WF18WF19WF20W
-
M11WCM12WCM13WCM14WCM15WCM16WCM17WCM18WCM19WCM20WCM21WC
M22WCM23WCM24WCM25WCM26WCM27WCM28WCM29WCM30WC
F11WCF12WCF13WCF14WCF15WCF16WCF17WCF18WCF19WCF20WCF21WC
F22WCF23WCF24WCF25WCF26WCF27WCF28WCF29WCF30WC
6170788795104115123132140148157165176185193202
-
F8WCF9WCF10WC
167194211226242268284327353369384401428443458485500515571586601619634
6'8"7'8"8'8"9'8"10'8"11'8"12'8"13'8"14'8"15'8"16'8"17'8"18'8"19'8"20'8"21'8"22'8"23'8"
24'8"25'8"26'8"27'8"28'8"29'8"30'8"31'8"32'8"
14 RUNGSTANDARD
F14S
11 RUNGWITH WALK-THRU
F11W
11 RUNG WITHWALK-THRU AND
CAGE: F11WC
14 RUNGWITH CAGE
F14SC
A MINIMUMOF 11' DIA.
SURFACE REQUIREDFOR MOUNTING
RIGHT SIDEENTRY SHOWN
SPCG
LGD3
POWDERCOATEDTOUGHTM
FIXED STEEL LADDERS – SERIES F AND SERIES Mwithout safety cages. OSHA requires safety cages on ladder heightsexceeding 20'. Separate cages are offered for updating older ladders tocurrent safety standards. All Cotterman fixed ladders meet or exceedOSHA 1910.27 and 1926.1053 standards.
Cotterman fixed steel ladders are designed for use where safe, solid verti-cal climbing access is required. Series F and Series M modular fixed steelladders are available with and without walk-thru handrails at the top land-ing surface. Standard fixed and walk-thru models can be used up to 20'
SERIES F FIXED LADDERS: Ladders are heavyduty one-piece welded assemblies.SERIES M MODULAR FIXED LADDERS:Ladders are heavy duty sub-assemblies, nosection is greater than 7' in length.
CONSTRUCTION FEATURES:• Side members are 1/4"x2"x2" steel angle.
Climbing rungs are 3/4" corrugated steelround rungs space on 12" centers. Stand-offbrackets are 7".
• Gray powder coat finish is standard color,yellow available.
FIXED LADDERS WITH SAFETY CAGES:Standard fixed steel ladders are combined withsafety cage protection. They are available in 10'through 29' sizes and are ideal for hatch-way orside step landing access.
CAGE FEATURES:• OSHA design safety cages have flared bot-
tom opening for easy entry.• Left or right side step access cage designs
are available at no charge.• Cage begins 7' from bottom of ladder.• Gray powder coat finish, yellow available.
FIXED LADDER WITH WALK-THRU HANDRAILS:Ladders are designed for applications where safelanding access is required. They are one-piecewelded assemblies for use in applications lessthan 20' in vertical height.
CONSTRUCTION FEATURES:• Side members are 1/4"x2"x2" steel angle. 3/4"
corrugated steel round climbing rungs on 12"centers. Stand-off mounting brackets are 7".
• Walk-thru handrails extend 42" above landingsurface. Mounting brackets included.
• Welded one-piece, gray powder coat finish,yellow available.
FIXED LADDER WITH WALK-THRU HANDRAILSAND SAFETY CAGES:Designed for safe landing access and availablefrom 10' to 29'. Cages and walk-thru handrailsextend 42" above landing surface.
CAGE FEATURES:• Safety cages are designed to OSHA specifi-
cations with flared bottom opening for easyentry.
• Cage begins 7' from bottom of ladder.• Gray powder coat finish, yellow available.
2. 3.
Cotterman fixed steel ladder acces-sories are designed to provide anadditional measure of safety orsecurity for any fixed steel ladder.
STANDOFF LANDINGPLATFORM: Standoff land-ing platforms with offset cagedladders are required by OSHAStandard 1910.27 at 30' maxi-mum height intervals. Theserugged, pre-engineered plat-forms are constructed with leftor right entries as required.
OPTION SP . . . . . . . .Shipping wt. 153 lbs.
SECURITY LADDERGUARD: The ladder guard ismounted directly over the lad-der climbing rungs to preventunauthorized use. It is avail-able in either 6' or 8' lengths.The guard ha a one piecepiano hinge, and is furnishedwith lock-open and lock-closed hasps.OPTION LG-6 . . .Shipping wt. 130 lbs.OPTION LG-8 . . .Shipping wt. 148 lbs.
SECURITY CAGEENTRY GATE:The cage security gateis designed to preventunauthorized entry intothe bottom of the laddercage. Doors have lock-able hasp for completesecurity.
OPTION CG . .Shipping wt. 31 lbs.
SAFETY CHAINATTACHMENT:The safety chain attach-ment is used on thewalk-thru handrails toprevent accidental exitfrom the top landingsurface.
OPTION D3 . . .
SERIES M - Modular Fixed LadderConstruction
7"
6"
13/32"HOLES (4)3" APART
1" DIA.11 GA.TUBING
6"
123/4"
32"
28"
40°
321/2"
SERIES Fconstruction
features
32"
28"
40°
321/2"
16"
191/4"24"
SAFETYCHAINOPTIONAL
9/16"DIA.
HOLE
40"123/4"
42"
28" 7"
ACCESSORIES
SPECIFICATIONS STANDARD WITH CAGE
OVERALLLENGTH
LENGTH:TOP TOBOTTOM
RUNGNO.
RUNGS
SERIES“F”
MODELNO.
SHPG.WT. PRICE
SERIES “M”
MODELNO.
SERIES “F”
MODELNO.
SHPG. WT. PRICE
OSHA NOTE:Although not required by OSHA, safety caging is
offered on 11 thru 20 rung models.
OSHA NOTE:Fixed ladder heights
exceeding 20' arerequired to
have safety caging.
OSHA NOTE: Heights exceeding 30' require a standoff platform (see option model SP)
3'3"4'3"5'3"6'3"7'3"8'8"9'3"10'3"11'3"12'3"13'3"14'3"15'3"16'3"17'3"18'3"19'3"20'3"
21'3"22'3"23'3"24'3"25'3"26'3"27'3"28'3"29'3"
SHIPPING NOTE: All 15 thru 28 rung Series F models with cages ship in 2 sections. All 29 and 30 rungmodels ship in 3 sections.
HOT DIP GALVANIZED FINISH OR STAINLESS STEEL CONTSTRUCTION CAN BE QUOTED.
3'4'5'6'7'8'9'10'11'12'13'14'15'16'17'18'19'20'
21'22'23'24'25'26'27'28'29'
456789101112131415161718192021
222324252627282930
F4SF5SF6SF7SF8SF9SF10SF11SF12SF13SF14SF15SF16SF17SF18SF19SF20S
-
3543526068778896105113122130139150158167175
-
M11SCM12SCM13SCM14SCM15SCM16SCM17SCM18SCM19SCM20SCM21SC
M22SCM23SCM24SCM25SCM26SCM27SCM28SCM29SCM30SC
F11SCF12SCF13SCF14SCF15SCF16SCF17SCF18SCF19SCF20SCF21SC
F22SCF23SCF24SCF25SCF26SCF27SCF28SCF29SCF30SC
156182197213268282298316342357373
388414429444471486501559575
SPECIFICATIONS WALK-THRU RAIL WITH WALK THRU & CAGE
OVERALLLENGTH
LENGTH:TOP TOBOTTOM
RUNGNO.
RUNGS
SERIES“F”
MODELNO.
SHPG.WT. PRICE
SERIES “M”
MODELNO.
SERIES “F”
MODELNO.
SHPG. WT. PRICE
OSHA NOTE:Although not required by OSHA, safety caging is
offered on 8 thru 20 rung models.
OSHA NOTE:Fixed ladder heights
exceeding 20' arerequired to
have safety caging.
OSHA NOTE: Heights exceeding 30' require a standoff platform (see option model SP)SHIPPING NOTE: All 15 thru 25 rung Series F models with cages ship in 2 sections. All 26 thru 30 rung
models ship in 3 sections.HOT DIP GALVANIZED FINISH OR STAINLESS STEEL CONTSTRUCTION CAN BE QUOTED.
3'4'5'6'7'8'9'10'11'12'13'14'15'16'17'18'19'20'
21'22'23'24'25'26'27'28'29'
456789101112131415161718192021
222324252627282930
F4WF5WF6WF7WF8WF9WF10WF11WF12WF13WF14WF15WF16WF17WF18WF19WF20W
-
M11WCM12WCM13WCM14WCM15WCM16WCM17WCM18WCM19WCM20WCM21WC
M22WCM23WCM24WCM25WCM26WCM27WCM28WCM29WCM30WC
F11WCF12WCF13WCF14WCF15WCF16WCF17WCF18WCF19WCF20WCF21WC
F22WCF23WCF24WCF25WCF26WCF27WCF28WCF29WCF30WC
6170788795104115123132140148157165176185193202
-
F8WCF9WCF10WC
167194211226242268284327353369384401428443458485500515571586601619634
6'8"7'8"8'8"9'8"10'8"11'8"12'8"13'8"14'8"15'8"16'8"17'8"18'8"19'8"20'8"21'8"22'8"23'8"
24'8"25'8"26'8"27'8"28'8"29'8"30'8"31'8"32'8"
14 RUNGSTANDARD
F14S
11 RUNGWITH WALK-THRU
F11W
11 RUNG WITHWALK-THRU AND
CAGE: F11WC
14 RUNGWITH CAGE
F14SC
A MINIMUMOF 11' DIA.
SURFACE REQUIREDFOR MOUNTING
RIGHT SIDEENTRY SHOWN
SPCG
LGD3
POWDERCOATEDTOUGHTM
Cotterman
PRICES SUBJECT TO CHANGE WITHOUT NOTICE • TAX NOT INCLUDED • TERMS: NET 30 DAYS • F.O.B. FACTORY810-679-4400 • FAX 810-679-4510 • TOLL FREE 800-5-LADDERCotterman®
®
COTTERMAN SERIES C WELDED STEEL CAGES are one-piece welded assemblies designed for attachment to existing fixed laddersup to 20" wide. A wide range of standard lengths is offered with custom sizesavailable. To determine the proper length, the cage should begin 7' to 8' fromthe floor and extend 42" above the landing surface (except for hatchways).
FEATURES:• Series C cages are designed in compliance with OSHA Standards
1910.27• Standard cage lengths are available from 7'6" to 27'6".• Cages are crated for shipping protection.• Wider bottom flare openings are provided for easy entry.• One-piece all welded steel with gray powder coat finish.• Hot dip galvanized finish or stainless steel construction can be
quoted.
7'6"8'6"9'6"10'6"11'6"12'6"13'6"14'6"15'6"16'6"17'6"18'6"19'6"20'6"21'6"22'6"23'6"24'6"25'6"26'6"27'6"
C075C085C095C105C115C125C135C145C155C165C175C185C195C205C215C225C235C245C255C265C275
229255291316340365401426451476512536561586622646671696732756781
MODEL SHPG.LENGTH PRICE
SERIES C WELDED STEEL CAGES
FEATURES:• Constructed of 11/4" tube with 3/4" non-slip solid
round rungs.• 18" wide steps on side step models and 24" on
walk-thru models, spaced on 12" centers.• Walk-thru models have flat supports for easy
mounting.• Gray powder coat is standard finish.
D2WTD3WTD4WTD5WTD6WTD7WTD8WTD9WTD10WT
343945505561667177
1'6"2'6"3'6"4'6"5'6"6'6"7'6"8'6"9'6"
2345678910
32"
28"
40°
321/2"
©COPYRIGHT COTTERMAN CO. 1986
POWDERCOATEDTOUGHTM
WELDED STEEL DOCK LADDERSOne-piece welded assemblies that provide safeaccess to docks and mezzanines. Walk-thru modelshave 42" high handrails. Side step models have steprungs plus 4 additional hand rungs.
SIDE-STEP7 RUNG - D3SS
WALK-THRU4 RUNG - D4WT
25/64" HOLES3" APART
25/64" HOLES3" APART
SAFETYCHAINOPT.
25/64" HOLES
3" APART
25/64" HOLES3" APART
B
12"
12"
10"
24"
42"
A
211/2"271/2"
“CHARGE IT”
NO.STEP
RUNGS2345678910
NO.STEP
RUNGS67891011121314
TOTALRUNGS
DIM.A
6'7'8'9'10'11'12'13'14'
DIM.B
SHPG.WT.
333842475156616570
SHPG.WT.
MODELNO.
D2SSD3SSD4SSD5SSD6SSD7SSD8SSD9SSD10SS
MODELNO. PRICEPRICE SERIES D