Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Jöst GmbH · Beerfeldener Straße 77
D-69483 Wald-Michelbach / Affolterbach
Tel. +49 (0)62 07 94 10-0 · Fax +49 (0)62 07 24 63
[email protected] · www.joest-abrasives.com Unlimited Uses - Patented Technology - Flexible Handling
MADE-TO-MEASURE...For a Lasting Luster!
-Superfinishing-Pad SG
suitable for all hole systems
Parquet
Laminate
Plasticoverlays
GFRP/GRP (Fiberglass/plastic materials)
Paints and varnishes
ADAPTABILITY PURE
Reduce your warehousing costs!
Jöst abrasives designed and constructed the Superfinishing Pad to be used with all types of abrasive plates. A made-to-measure
fit is guaranteed , in spite of different configurations and perforation combinations.
Delivery just in time!
Whether you require discs, pads, drums, belts or brushes – the Superfinishing Pad is available in
almost any shape and size and fits on all conventional sanders made by companies such as Bosch,
AEG, Kress, Festo, Fein, Flex and many more.
Just ask us… we have the right solution, even for your specialized requirements - and that’s a promise.
SG
2
SG
1
Superfinishing Pads SG are available in the following grades:
Superpad SG
2 4 0
3 2 0
6 0 0
8 0 0
1 2 0 0
1 5 0 0
Superpad SG2
8 0 0
1 6 0 0
1 8 0 0
2 0 0 0
2 5 0 0
3 0 0 0
Reduce your labor costs by up to 90%!
The perfect surface for every material, thanks to a new generation of unique, high-performance abrasives - the SG and SG2 Superfinishing Pads.
These pads offer the highest processing quality, even for the most demanding applications like ultra-sensitive surfaces and materials. Compared to traditional abrasives, the Superfinishing
Pad will give you up to 6 times more performance at the final polishing stage when used with a hand-operated sanding machine.
The pad’s innovative and new open structure also enables you to work continuously in a dust-free environment - the dust is extracted over the entire surface.The performance of our will totally convince you!
EFFECTIVE
Smooth as glass – without changing pressure!The Superfinishing Pad carries on where other abrasives reach their limit – giving you the desired effect every
time. The multi-layered construction of the Superfinishing Pad evens out variations in the pressure applied and irregularities on the work surface and the abrasive plate.
Polishing, matt-finishing and refining almost any kind of surface is fast and simple – and the process results in a surface quality second to none. Dust inclusions and scratches can also be completely ground or polished out
by means of full surface or targeted spot processing – without damaging the surface of the work piece. This is sensational technology at its best – now lengthy grinding procedures are a thing of the past!
SHEER VERSATILITYCOARSE & FINE
One pad - unlimited possibilities!The special design and production technology of the Superfinishing Pads offers you globally unique processing of a vast range of materials. Mineral materials like, for example Corian®, Varicor®, Wilsonart®, GFK, paints, varnishes, acrylic glass and high gloss surfaces can be specifi-cally sanded - in the shortest possible time and with a minimum of abrasive material use.
Even without paste, the Superfinishing Pad can create high gloss and matt surfaces on stainless steel and other metals – quickly and efficiently. The pads also open up a wealth of options for polishing and treating synthetic, laminate and parquet flooring smoothly and easily. In the automotive industry, the Superfinishing Pad is ideal for the Smart-Repair procedure and for removing paint runs, dust inclusions and overspray effects.
Brilliant results - and dust-free! The SG has a fine grinding net – but the new -Superfinishing-
Pad SG2 has a grit carrier made of fabric. This more stable surface makes the Superfinishing Pad SG2 ideal for final smoothing jobs, removing
paint runs and dust inclusions, processing and smoothing orange peel skin, Smart-Repair jobs, leveling out border areas between differing
surfaces, preparing vehicles for further processing and finishing stainless steel and nonferrous metals.
Both pads are ideal for wet and dry sanding.When materials which produce a high concentration of dust
have to be dry sanded, we recommend the Superfi-
nishing Pad SG – the open structure of its grinding surface (the net) guarantees the continuous removal
of dust through the pad.
Solid surface material
Acryl
Stainless Steel& NF metals
A PERFECTLY EVEN FINISH
SG
2
SG
1
Superfinishing Pads SG are available in the following grades:
Superpad SG
2 4 0
3 2 0
6 0 0
8 0 0
1 2 0 0
1 5 0 0
Superpad SG2
8 0 0
1 6 0 0
1 8 0 0
2 0 0 0
2 5 0 0
3 0 0 0
Reduce your labor costs by up to 90%!
The perfect surface for every material, thanks to a new generation of unique, high-performance abrasives - the SG and SG2 Superfinishing Pads.
These pads offer the highest processing quality, even for the most demanding applications like ultra-sensitive surfaces and materials. Compared to traditional abrasives, the Superfinishing
Pad will give you up to 6 times more performance at the final polishing stage when used with a hand-operated sanding machine.
The pad’s innovative and new open structure also enables you to work continuously in a dust-free environment - the dust is extracted over the entire surface.The performance of our will totally convince you!
EFFECTIVE
Smooth as glass – without changing pressure!The Superfinishing Pad carries on where other abrasives reach their limit – giving you the desired effect every
time. The multi-layered construction of the Superfinishing Pad evens out variations in the pressure applied and irregularities on the work surface and the abrasive plate.
Polishing, matt-finishing and refining almost any kind of surface is fast and simple – and the process results in a surface quality second to none. Dust inclusions and scratches can also be completely ground or polished out
by means of full surface or targeted spot processing – without damaging the surface of the work piece. This is sensational technology at its best – now lengthy grinding procedures are a thing of the past!
SHEER VERSATILITYCOARSE & FINE
One pad - unlimited possibilities!The special design and production technology of the Superfinishing Pads offers you globally unique processing of a vast range of materials. Mineral materials like, for example Corian®, Varicor®, Wilsonart®, GFK, paints, varnishes, acrylic glass and high gloss surfaces can be specifi-cally sanded - in the shortest possible time and with a minimum of abrasive material use.
Even without paste, the Superfinishing Pad can create high gloss and matt surfaces on stainless steel and other metals – quickly and efficiently. The pads also open up a wealth of options for polishing and treating synthetic, laminate and parquet flooring smoothly and easily. In the automotive industry, the Superfinishing Pad is ideal for the Smart-Repair procedure and for removing paint runs, dust inclusions and overspray effects.
Brilliant results - and dust-free! The SG has a fine grinding net – but the new -Superfinishing-
Pad SG2 has a grit carrier made of fabric. This more stable surface makes the Superfinishing Pad SG2 ideal for final smoothing jobs, removing
paint runs and dust inclusions, processing and smoothing orange peel skin, Smart-Repair jobs, leveling out border areas between differing
surfaces, preparing vehicles for further processing and finishing stainless steel and nonferrous metals.
Both pads are ideal for wet and dry sanding.When materials which produce a high concentration of dust
have to be dry sanded, we recommend the Superfi-
nishing Pad SG – the open structure of its grinding surface (the net) guarantees the continuous removal
of dust through the pad.
Solid surface material
Acryl
Stainless Steel& NF metals
A PERFECTLY EVEN FINISH
Jöst GmbH · Beerfeldener Straße 77
D-69483 Wald-Michelbach / Affolterbach
Tel. +49 (0)62 07 94 10-0 · Fax +49 (0)62 07 24 63
[email protected] · www.joest-abrasives.com Unlimited Uses - Patented Technology - Flexible Handling
MADE-TO-MEASURE...For a Lasting Luster!
-Superfinishing-Pad SG
suitable for all hole systems
Parquet
Laminate
Plasticoverlays
GFRP/GRP (Fiberglass/plastic materials)
Paints and varnishes
ADAPTABILITY PURE
Reduce your warehousing costs!
Jöst abrasives designed and constructed the Superfinishing Pad to be used with all types of abrasive plates. A made-to-measure
fit is guaranteed , in spite of different configurations and perforation combinations.
Delivery just in time!
Whether you require discs, pads, drums, belts or brushes – the Superfinishing Pad is available in
almost any shape and size and fits on all conventional sanders made by companies such as Bosch,
AEG, Kress, Festo, Fein, Flex and many more.
Just ask us… we have the right solution, even for your specialized requirements - and that’s a promise.