Firmware Matrix

  • Upload
    sts100

  • View
    254

  • Download
    0

Embed Size (px)

DESCRIPTION

sun

Citation preview

  • 6/13/2014 Document 1380260.1

    https://support.oracle.com/epmos/faces/DocumentDisplay?_adf.ctrl-state=7pe8kyj59_46&id=1380260.1 1/15

    SPARC Enterprise M3000/M4000/M5000/M8000/M9000 - XCP Firmware to Defect Cross Reference (Doc ID 1380260.1)

    Modified: 01-Apr-2014 Type: REFERENCE

    In this Document

    Purpose

    Details

    XCP 1117 Released 26 February 2014 ( All M-Series )

    XCP 1116 Released 27 August 2013 ( All M-Series )

    XCP 1115 Removed from Recommended List ( All M-Series )

    XCP 1114 Not Available - See document 1538391.1 from more information on issues with this release.

    XCP 1113 Released 21 July 2012 ( All M-Series )

    XCP 1112 Released 07 May 2012 ( All M-Series )

    XCP 1111 Released 06 Apr 2012 ( All M-series )

    XCP 1110 EOL

    XCP 1102 EOL

    XCP 1101 EOL

    XCP 1100 EOL

    XCP 1093 DO NOT USE See Alert 1220873.1

    XCP 1092 DO NOT USE See Alert 1220873.1

    XCP 1091 EOL 02 Dec 2009 ( All M-series )

    XCP 1090 EOL Released 28 Aug 2009 ( All M-series )

    XCP 1082 EOL Released 29 May 2009 All Platforms ( All M-series )

    XCP 1081 EOL

    XCP 1080 EOL

    XCP 1072 EOL ( M4000, M5000, M8000, M9000-32 and M9000-64 Only )

    XCP 1071 EOL

    XCP 1070 EOL

    XCP 1061 EOL - To obtain XCP1061 open a Service Request in My Oracle Support

    XCP 1060 EOL

    XCP 1050 EOL

    XCP 1041 EOL

    References

    APPLIES TO:

    Sun SPARC Enterprise M3000 Server - Version All Versions and laterSun SPARC Enterprise M5000 Server - Version All Versions and laterSun SPARC Enterprise M8000 Server - Version All Versions and laterSun SPARC Enterprise M9000-32 Server - Version All Versions and laterSun SPARC Enterprise M4000 Server - Version All Versions and laterInformation in this document applies to any platform.

    PURPOSE

    This document can be used to cross reference bugs to the XCP versions containing the fix.

    To view the available versions of the Sun SPARC(R) Enterprise M3000, M4000, M5000, M8000, and M9000 XCP Firmware Image software (XCP), and to find out where and how to obtain the appropriate images, please read "M4000, M5000, M8000, M9000 XSCF Control Package (XCP) Firmware Image Software Version Matrix Information (Doc ID 1002631.1)" .

    To view the table with supported hardware, firmware and operating system (OS) combinations, as well as required software patches for M-series servers, please read "SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Server Matrix for Hardware, Firmwareand Software (Doc ID 1145383.1)" .

    To discuss this information further with Oracle experts and industry peers, we encourage you to review, join or start a discussion in the My Oracle Support Community - M Series Servers

    DETAILS

    XCP 1117 Released 26 February 2014 ( All M-Series )

    CR # Synopsis

    17337119 DST change in timezone Asia//Tel_Aviv needs to be updated in OPL XCP firmware

    17348428 THE CMEM_UNUSABLE_SYS_DOMAIN BIT GETS SET, BUT ISN'T CLEARED

    18164678 XSCF changes to call patroldiag after fork() and exec() are executed

    18183768 rsyncd cannot synchronize regularly after XSCF is switched by XSCF failure

  • 6/13/2014 Document 1380260.1

    https://support.oracle.com/epmos/faces/DocumentDisplay?_adf.ctrl-state=7pe8kyj59_46&id=1380260.1 2/15

    XCP 1116 Released 27 August 2013 ( All M-Series )

    CR # Synopsis

    16011251 sethttps should generate 2048 (or greater) bits keys and not use MD

    16825834 snapshot -l accepts argument

    16978703 XSCF detects a file system corruption incorrectly

    17062578 Confirmation request regarding message change of sethttps

    17179848 Fix of WatchDog Timeout by JFFS2 write-error processing that releases a memory t

    17179990 XSCF WDT occurred by the recovery processing of JFFS2.

    17193451 sethttps should generate 2048 (or greater) bits keys ... (restoreconfig changes)

    17284889 XSCF process down might be occurred during power-on processing.

    XCP 1115 Removed from Recommended List ( All M-Series )

    CR # Synopsis

    16447982 XSCF supports new CLI to reset oneself forcibly.

    16457527 fieldeng privilege no longer supported by clearfault

    15891122 snapshot collect username/password combo in readable format

    15818191 Area length shortage in showsnmpvacm CLI was found

    15818189 Change request regarding the description of OPL-SP-MIB.mib file.

    15807140 Trap of Fault Management MIB is not reported.

    15789531 Enable audit and trace logging of clearfault and remove from service

    15757233 The lifetime of F20cards are not displayed by ioxadm -v lifetime.

    15921263 CMEM_STATUS_SHUTDOWN_REQUEST not cleared if a 'reset'follows a 'poweroff'

    15820827 Introduce an I2c read retry on FF as has been done on DC

    16006105 Regular tzdata update

    16242988 FF - cannot clear MBU Degraded status

    16247278 Confirmation request about FMA message class - patrol_diagnosis

    XCP 1114 Not Available - See document 1538391.1 from more information on issues with this release.

    CR # Synopsis

    7072870 Modify set-ascii-security-password to optionally prompt for values

    7142507 OPL OBP Failure to configure an IO Box via cfgadm

    7147503 OBP fails when multiple iSCSI targets on a single transport address

    7193189 Need a way to download XCP images from a domain for non-networked XSCFs

    CR # Synopsis

    6750732 DR trap payload is incorrect

    6931105 Typo, "Achive", in the inline alert message by the Archive button on Audit page

    7032793 libfrustatus may truncate the last character of part_number, serial_number, version

    7048572 xcp_transfer verbose output does not take into consideration the direction of the transfer

    7058986 CMEM_STATUS_WARNING can be erroneously cleared after power cycling the FRU

    7081753 setldap -p with the specific character ended abnormally

    7154759 7187556 Check-LED issue

    CR # Synopsis

    7187299 Add diagnostic messaging to help root cause a picld issue

    7189317 Additional logging request for the delaying of telnet/ssh connection

    7203054 Add diagnostic messaging to help root cause a WDT

    XCP 1113 Released 21 July 2012 ( All M-Series )

    CR # Synopsis

    71591717180251

    BDB corruption (page header + data are zeroed)

    7166651 DB_LOCK_DEADLOCK was returned by scdb_get()

    70876857167659

    Incorrect IOBOX error log with "---" msg was filed.

    CR # Synopsis

  • 6/13/2014 Document 1380260.1

    https://support.oracle.com/epmos/faces/DocumentDisplay?_adf.ctrl-state=7pe8kyj59_46&id=1380260.1 3/15

    7132774 Memory exhaustion on XSCF

    71121737160215

    Commonize DIMM-PCE behavior for Oracle & FJ brand system

    XCP 1112 Released 07 May 2012 ( All M-Series )

    CR # Synopsis

    7162656 BDB corruption (page header + data are zeroed)

    XCP 1111 Released 06 Apr 2012 ( All M-series )

    CR # Synopsis

    7150657 sshd problem in XCP1110

    XCP 1110 EOL

    CR # Synopsis

    CR # Synopsis

    6877010 SSH version on XSCF should be upgraded

    7012224 XSCF sends Rst packets without AH header when dscp service is restarted on domain.

    7025452 fmd process down caused the messages for XSCFU hang-up and XSCF process down

    7041570 Securing ssh communication

    7046697 'setsnmp' gives segmentation fault

    7051222 Errorneous setldapssl command arg

    CR # Synopsis

    7022369 FMA needs to list IOU as a secondary suspect in CLK failures on FF

    7031894 Watchdog timeout occurred.

    7038672 FMA needed changes to support DC IOU3

    7069669 A broken IOU can be not reported by showstatus - Partner's part of the change

    7072071 setldap command execution resulted in the display of error message.

    7082602 scp '-Z' option does not work properly

    CR # Synopsis

    7043769 e-mail address validation is not compliant with RFC 5322

    7058615 Bad blocks on /scf/setup resulting in watchdog timeout and running domains got reset

    7067503 showsnmp cannot be executed by the account with a field engineer privilege.

    7078677 2048 ssh host key support for 'dumpconfig' CLI

    7080011 setldapssl CLI does not identify "usermap" as key word.

    7088671 UNLOCKED permits can't be deleted in absence of any LOCKED permit, even if some of them are free.

    7090809 IOUA3 support: SNMP changes

    7098709 'setssh -c enable/disable' stores active host keys into wrong DB field

    CR # Synopsis

    709683170824467114369711348071475037142507

    OBP / Fcode fixes

    7092822 Doing a DR of LSB on FF or DC causes bus error

    7113201 setdefaults/restoredefaults command cannot remove some of log files.

    XCP 1102 EOL

    CR # Synopsis

    6914034 Problem with some command line args logging

    7042804 Adding message to console command

    7042939 SNAPSHOT MSG: Command exited with 1: Operation not permitted

    CR # Synopsis

    6818189 setpasswordpolicy shows wrong error message "Invalid expiration date" for invalid Expiry Days entry

    6907290 scfSystemState, scfHardwareState and scfDomainErrorStatus are not updated immediately.

    6923186 snapshot should collect IPSec key inforamtion of DSCP

    6971172 XSCF snapshot should default to collecting the full log set

  • 6/13/2014 Document 1380260.1

    https://support.oracle.com/epmos/faces/DocumentDisplay?_adf.ctrl-state=7pe8kyj59_46&id=1380260.1 4/15

    6982845 snapshot should collect 'ioxadm -v lifetime'

    6999483 Change ESM EOL alarm threshold for F20 1.0 in M-series

    7003451 resetra coredumping due to scdb lock not held

    7006542 fmdsyncd down during a firmup running in the system test.

    7013075 BUI: Replace links to docs.sun.com with links to Oracle Technology Network in HTML pages

    7018096 COD: Remove headroom feature

    7019526 viewconfig can no longer be built on Solaris

    7020161 Ikkaku-E systems exceeding single PSU power output limit.

    7020683 COD: Relocate source code for verifycodactivationhistory tool

    7021241 "cfgdevice -l" is needed to add to snapshot.

    CR # Synopsis

    7020939 Problem with XSCF connection

    XCP 1101 EOL

    CR # Synopsis

    7010894 setemailreport does not accept an email address having underscore(_)

    7013390 Remove user-interface changes for 1.1 F20

    CR # Synopsis

    6815259 Setting LDAP bind name value more than 128 characters gets truncated in BUI

    6923191 BUI: Script error occurred on LDAP page.

    6940532 iomgr faults power supply which is turned off for 5 minutes

    6982003 Add support for 1.1 version of F20 card

    6983908 XSCF needs to get up to date on DST rules changes

    6986188 Support change in current COD licensing model (LPS to edelivery)

    6995112 Diagnosability of SCDB disk full/consistency/missing files condition could be improved

    CR # Synopsis

    6791431 opl:setting wrong date in "User account" will take the date as next month date

    6883796 restoreconfig does not restrict the size of configuration file that is downloaded to XSCF

    6931093 BUI: Audit log page checks the input(Date) that is not indispensable.

    6931096 BUI: SMTP settings page checks email address with different rule with CLI.

    6939949 Problem with BUI

    6946029 XSCF BUI Oracle rebranding

    6988801 Processes descending from scf_init are started with fd=0,1,2 closed

    6993151 XSCF FMSP rebranding - removing references to Sun

    6994665 Ctrl-Z should be masked by the XSCF

    7000103 BUI: Update AD and LDAP/SSL cert proxy type to use select box widget

    7002609 COD: Log records in activation history after restoreconfig and when history db first initialized

    7003622 setemailreport error message has misspelled text and missing newline.

    CR # Synopsis

    7007416 Enable ioxadm CLI on M3000 to support 1.1 (M2) F20 card

    7008908 COD: Enable edelivery licensing model for Partner brandid

    7009226 Need to change the browser BUI title on standby XSCF

    7010255 Need to change the browser BUI title on standby XSCF (Partner owned)

    XCP 1100 EOL

    CR # Synopsis

    6946028 XSCF CLI Oracle rebranding

    6946490 RASDB failed to identify CLKU as primary suspect, M9000 did not recover domains on redundant CLKU

    6996000 When both RCIs cannot be communicated, the inquiry from cluster becomes a time-out.

    7002314 SPARC Enterprise M8000/M9000 Servers Installation Guide needs better wording around power redundancy

    6845317 ./sun/var/opt/SUNWsymon/cfg/platform-opl.dat" above file fragment very much. ( JFFS Fragmentation )

    CR # Synopsis

    6908805 dbdump is not aware of the ad_ldapssl database

    6913284 Mail utility command for XSCF platform

    6918829 Alternate server number should accept only numerical values for setad and setldapssl

    6921574 Cannot terminate setad CLI.

    6927116 scfHardwareState is not updated after some faults

    6939537 https feature turns to disable after XSCF reboot

    6940073 Failed logins of one AD user affects the other user's logins and locks him out

    CR # Synopsis

    2193754 SNMP missing information for downlink (and F20)

  • 6/13/2014 Document 1380260.1

    https://support.oracle.com/epmos/faces/DocumentDisplay?_adf.ctrl-state=7pe8kyj59_46&id=1380260.1 5/15

    2193937 COD: Change terminology/language in CLIs and BUI to conform to Oracle product naming conventions

    2194039 ioxadm failed to show lifetime.

    2194051 XCP1092 setnetwork command failing

    2194335 M8000 and M9000 PSU erroneously indicate "Breaker off" status in showhardconf

    6670662 When CR6600214 happens in Partner mode, nothing is marked degraded

    6791410 opl:giving irrelevant values to 'setsumc' at CLI will give "script error"

    6933792 OPL-E (J++) changes in SNMP

    6941944 XSCF is wrongly executing scdb_put() from Standby side every 2 seconds

    6946487 BUI: Incorrect/invalid error on Active Directory and LDAP/SSL screens when "-" specified for server

    6952619 OPL-E (J++) changes in prtfru (libipmi)

    CR # Synopsis

    2194446 XSCF may generates a storm of arp broadcast when the link was down for a long period of time

    2195170 CLI hung up on the system with F20+IOBOX after xscfreboot execution.

    2195421 monitorlog gives a message containing 'license' when headroom is reduced by adding the permit-key

    6927721 BUI: Buttons are not spaced correctly in IE7/IE8

    6940535 BUI does not parse cookies correctly ... leading to session expired message when FQDN is used

    6942144 servicetags upgrade to version 1.1.5

    6960111 Duplicate privileges should not be accepted by AD/LDAP_SSL defaultrole or custom group role

    6961919 BUI does not parse cookies correctly ... leading to session expired message (Oracle-owned changes)

    6966764 SNMP returns invalid value for scfBoardSubType.iou.0 with XCP1902.

    CR # Synopsis

    6905441 scdb_open returned error during system off state.

    6913987 setssh/showssh CLIs treat AD users incorrectly as 'proxyuser'

    6914053 fix scf_error_log data generated by iomgr to indicate fault details instead of ereport details

    6914377 setssh allows upload of public keys to reserved accounts

    6921571 logarc misjudge platform model.

    6929944 Timeout condition due to interrupt handled by the UART driver.

    6967001 Partner update "showlogs error" output to match Oracle-changes to scf_error_log

    6971514 Enhancement request for snapshot.

    6984765 setting 2+ default routes will render the XSCF unusable (BDB corrupted)

    CR # Synopsis

    6797558 Dual process get SCDB error on Standby.

    XCP 1093 DO NOT USE See Alert 1220873.1

    CR # Synopsis

    2195194 Some components are marked degraded on Sun branded systems, but not on Partner branded systems.

    6896055 M8000 and M9000 PSU erroneously indicate "Breaker off" status in showhardconf

    6940544 XSCF may generates a storm of arp broadcast when the link was down for a long period of time

    6962007 monitorlog gives a message containing 'license' when headroom is reduced by adding the permit-key

    6962929 CLI hung up on the system with F20+IOBOX after xscfreboot execution.

    CR # Synopsis

    6930008 SNMP missing information for downlink (and F20)

    6938653 COD: Change terminology/language in CLIs and BUI to conform to Oracle product naming conventions

    6940788 ioxadm failed to show lifetime.

    6952185 XCP1092 setnetwork command failing

    XCP 1092 DO NOT USE See Alert 1220873.1

    CR # Synopsis

    6929639 fmdsyncd downed.

    6935346 dumpconfig/restoreconfig broken due to BDB addition of setup_packet_filter_info_t

    6936544 Change F20 ESM EOL Warning threshold to 30 days before EOL Exceeded

    CR # Synopsis

    6693778 output of showhardconf command is incorrect during IOBox operations

    6771052 Email notifications violate RFC2822 and RFC2046

    6794232 setdualpowerfeed enabled leaves FF2 hardware deconfigured when running at 100VAC power with 2 IOU's

    6796931 BUI sends too many queries to the Directory Server when logging in as a LDAP user

    6819296 The number of characters which can be set to the LDAP Server field is inconsistent

    6861630 setnetwork does not set appropriate network mask in specific case.

    6862682 Dynamic FRUID data on some link cards in IO box does not get updated properly

    6868683 ioxadm displays incorrect linkcard partnumber revision

    6870490 On OPL FF and DC, changes in fan alarm conditions while XSCF is down are ignored on XSCF boot.

  • 6/13/2014 Document 1380260.1

    https://support.oracle.com/epmos/faces/DocumentDisplay?_adf.ctrl-state=7pe8kyj59_46&id=1380260.1 6/15

    6875462 MIB definition and header definition is inconsistent.

    6882249 setad loadcert" needs -u -p -t options

    6885085 Some backup Flash memory segments of M4000/M5000 for POST/OBP are not initialized for Quad-XSB mode.

    6885581 BUI: Add support for viewing Active Directory and LDAP over SSL log files

    6888497 Script error occurred on AD/LDAP over SSL Group Properties pop-up.

    6888970 setad server returns only usage, when invalid port number is specified.

    6888976 "setad timeout", "setad group" and "setad defaultrole" return

    6888979 "setad dnslocatormode" allows to enable, even though dnslocatorquery is not set.

    6889884 pop up got Internal Server Error

    6890817 There are some inappropriate description on BUI Active Directory pages.

    6891316 setad does not check multi byte character.

    6893578 showconsolepath command return "proxyuser" for username, when user login to XSCF

    6894238 BUI: Disable/gray-out login button after submit to indicate login is in process

    6894382 setldap: Invalid hostname and port number can be set

    6894410 XSCF local userids above 65535 causes process down and XSCF reboot

    6896929 BUI: Move AD/LDAPSSL primary server and certificate configuration from Servers table to main page

    6897059 Description of console option is missing from setad /setldapssl loadcert

    6898758 Cannot be defined the host route to XSCF.

    6898759 Duplicated DNS settings might not be able to delete.

    6900533 Incorrect behavior for "setad log" and "setldapssl log"

    6902766 Non Standard UPN user can be logged in when dnslocatormode is enabled but expsearchmode is disabled.

    6902772 replacefru for the faulted FAN failed.

    6904626 Serial number of some specific SSL certificate can not be shown by XSCF BUI.

    6905442 Cannot see how to specify the usermap operand of setldapssl.

    6907182 Man page of setldapssl describe UPN,NT and DN as userdomain format

    6907184 the reader is hard to understand the feature of usermapmode.

    6911309 WDT improvement.

    CR # Synopsis

    6693778 output of showhardconf command is incorrect during IOBox operations

    6771052 Email notifications violate RFC2822 and RFC2046

    6794232 setdualpowerfeed enabled leaves FF2 hardware deconfigured when running at 100VAC power with 2 IOU's

    6796931 BUI sends too many queries to the Directory Server when logging in as a LDAP user

    6819296 The number of characters which can be set to the LDAP Server field is inconsistent

    6861630 setnetwork does not set appropriate network mask in specific case.

    6862682 Dynamic FRUID data on some link cards in IO box does not get updated properly

    6868683 ioxadm displays incorrect linkcard partnumber revision

    6870490 On OPL FF and DC, changes in fan alarm conditions while XSCF is down are ignored on XSCF boot.

    6875462 MIB definition and header definition is inconsistent.

    6882249 setad loadcert" needs -u -p -t options

    6885085 Some backup Flash memory segments of M4000/M5000 for POST/OBP are not initialized for Quad-XSB mode.

    6885581 BUI: Add support for viewing Active Directory and LDAP over SSL log files

    6888497 Script error occurred on AD/LDAP over SSL Group Properties pop-up.

    6888970 setad server returns only usage, when invalid port number is specified.

    6888976 "setad timeout", "setad group" and "setad defaultrole" return

    6888979 "setad dnslocatormode" allows to enable, even though dnslocatorquery is not set.

    6889884 pop up got Internal Server Error

    6890817 There are some inappropriate description on BUI Active Directory pages.

    6891316 setad does not check multi byte character.

    6893578 showconsolepath command return "proxyuser" for username, when user login to XSCF

    6894238 BUI: Disable/gray-out login button after submit to indicate login is in process

    6894382 setldap: Invalid hostname and port number can be set

    6894410 XSCF local userids above 65535 causes process down and XSCF reboot

    6896929 BUI: Move AD/LDAPSSL primary server and certificate configuration from Servers table to main page

    6897059 Description of console option is missing from setad /setldapssl loadcert

    6898758 Cannot be defined the host route to XSCF.

    6898759 Duplicated DNS settings might not be able to delete.

    6900533 Incorrect behavior for "setad log" and "setldapssl log"

    6902766 Non Standard UPN user can be logged in when dnslocatormode is enabled but expsearchmode is disabled.

    6902772 replacefru for the faulted FAN failed.

    6904626 Serial number of some specific SSL certificate can not be shown by XSCF BUI.

    6905442 Cannot see how to specify the usermap operand of setldapssl.

    6907182 Man page of setldapssl describe UPN,NT and DN as userdomain format

    6907184 the reader is hard to understand the feature of usermapmode.

    6911309 WDT improvement.

  • 6/13/2014 Document 1380260.1

    https://support.oracle.com/epmos/faces/DocumentDisplay?_adf.ctrl-state=7pe8kyj59_46&id=1380260.1 7/15

    CR # Synopsis

    6693778 output of showhardconf command is incorrect during IOBox operations

    6771052 Email notifications violate RFC2822 and RFC2046

    6794232 setdualpowerfeed enabled leaves FF2 hardware deconfigured when running at 100VAC power with 2 IOU's

    6796931 BUI sends too many queries to the Directory Server when logging in as a LDAP user

    6819296 The number of characters which can be set to the LDAP Server field is inconsistent

    6861630 setnetwork does not set appropriate network mask in specific case.

    6862682 Dynamic FRUID data on some link cards in IO box does not get updated properly

    6868683 ioxadm displays incorrect linkcard partnumber revision

    6870490 On OPL FF and DC, changes in fan alarm conditions while XSCF is down are ignored on XSCF boot.

    6875462 MIB definition and header definition is inconsistent.

    6882249 setad loadcert" needs -u -p -t options

    6885085 Some backup Flash memory segments of M4000/M5000 for POST/OBP are not initialized for Quad-XSB mode.

    6885581 BUI: Add support for viewing Active Directory and LDAP over SSL log files

    6888497 Script error occurred on AD/LDAP over SSL Group Properties pop-up.

    6888970 setad server returns only usage, when invalid port number is specified.

    6888976 "setad timeout", "setad group" and "setad defaultrole" return

    6888979 "setad dnslocatormode" allows to enable, even though dnslocatorquery is not set.

    6889884 pop up got Internal Server Error

    6890817 There are some inappropriate description on BUI Active Directory pages.

    6891316 setad does not check multi byte character.

    6893578 showconsolepath command return "proxyuser" for username, when user login to XSCF

    6894238 BUI: Disable/gray-out login button after submit to indicate login is in process

    6894382 setldap: Invalid hostname and port number can be set

    6894410 XSCF local userids above 65535 causes process down and XSCF reboot

    6896929 BUI: Move AD/LDAPSSL primary server and certificate configuration from Servers table to main page

    6897059 Description of console option is missing from setad /setldapssl loadcert

    6898758 Cannot be defined the host route to XSCF.

    6898759 Duplicated DNS settings might not be able to delete.

    6900533 Incorrect behavior for "setad log" and "setldapssl log"

    6902766 Non Standard UPN user can be logged in when dnslocatormode is enabled but expsearchmode is disabled.

    6902772 replacefru for the faulted FAN failed.

    6904626 Serial number of some specific SSL certificate can not be shown by XSCF BUI.

    6905442 Cannot see how to specify the usermap operand of setldapssl.

    6907182 Man page of setldapssl describe UPN,NT and DN as userdomain format

    6907184 the reader is hard to understand the feature of usermapmode.

    6911309 WDT improvement.

    CR # Synopsis

    6906738 XSCF needs to provide management for F20 PCIe card (code name Aura)

    6909448 BUI: Enhance AD and LDAP over SSL load certificate page to support user, proxy, and proxy_type

    6911218 Need new fault rule for OBP boot failure

    6913019 AD user does not properly display privileges of non-AD user

    6913991 request for scftrace region for fmdsyncd in support of CR 6582835

    6916641 BUI session cache changes need additional checks

    XCP 1091 EOL 02 Dec 2009 ( All M-series )

    CR # Synopsis

    6890816 "setad timeout 0" results rejecting loging in.

    6891763 When "setad log" is executed, segmentation fault happens.

    6896076 Privileges assigned to AD Administrator and Operator group are not accurate

    6897898 When AD ldap bind call returns 0x31, no further bind shall be attempted with additional AD servers

    CR # Synopsis

    6477057 RFE: DNS information recorded during initial install does not provide for a "search" directive

    6666297 "Internal Server Error" returned from bui after firmware upgrade is complete.

    6741770 Trap host config change is not valid untile setsnmp disable and setsnmp enable are done

    6793146 description of the scfSPFailover notification is wrong.

    6794811 OPL: M9000-64 The XBU faulted does not match the certainty reported by FMA

    6804816 M-series: setdualpowerfeed & showdualpowerfeed confuse customers and have no beneficial function

    6808531 Cannot be logged in to XSCF with ldap after switchover happened once.

    6810902 BUI User Accounts table shows the corrupted strings

    6818718 Range of input Integer values needs to be corrected in "man setpasswordpolicy"

    6828477 dumpconfig needs to manage LDAP Certificates

    6830790 XSCF needs to provide ILOM-like AD support for M-Series

    6838671 Can not login to xscf with ldap authetication via ssh

  • 6/13/2014 Document 1380260.1

    https://support.oracle.com/epmos/faces/DocumentDisplay?_adf.ctrl-state=7pe8kyj59_46&id=1380260.1 8/15

    6847019 Password policy is not cleared by setdefaults all command.

    6847963 https/ssl webserver config on xscf allows SSLv2 connects

    6851009 XSCF lost NTP server when any change to NTP server, even rebootxscf failed to recover it

    6852765 Login to standby XSCF BUI fails

    6858201 BUI: Provide Active Directory (AD) and LDAP/SSL configuration support for M-Series

    6858203 BUI: Add user role/privilege info to session state to support ? and LDAP/SSL

    6864416 snapshot entry for showdateoffset needs to be corrected

    6867706 snmpd down occurred after domain pon/poff operation on the system that connected IOBOX.

    6867707 snapshot enhance request for XCP1091.

    6869796 Add Active Directory/LDAP over SSL configuration data backup to BDB support

    6869800 Add Active Directory/LDAP over SSL configuration data backup to panel support

    6870846 passwd command accepts "_", even though it is not listed in users' guide.

    6871640 Update showdevices man page re procedure following DR and domain power cycle

    6875469 On OPL M3000 Ikkaku, fan speed is set to level 4 upon domain power up, regardless of conditions.

    6882322 BUI: Enable Active Directory and LDAP over SSL for non-Sun brand

    CR # Synopsis

    6852845 fmd replays IO faults unexpectedly when XSCF ssh is configured.

    6862966 There is inaccuracy in http://www.sun.com/msg/SCF-8006-3J

    6865485 sethttps fails with "internal error" if the total number of characters.

    6875804 prtfru changes needed to support Ikakku 48v dc PSU

    6879471 audit log shows AD/LDAPSSL users as "proxyuser"

    6880064 Login to standby XSCF BUI fails (Sun Brand)

    6882256 allow user to display AD/etc troubleshooting log

    6882309 BUI: Active Directory and LDAP over SSL load certificate must suppport local file upload

    6882313 AD/LDAPSSL: setad/setldapssl loadcert needs to mount/unmount USB device

    6885007 BUI: Data Collector fails on Standby XSCF

    6889382 When AD has root account, root permission can be used on XSCF.

    6889875 inappropriate certificate file loaded, active directory page get internal error

    6893981 The XCP commands "showenvironment air" and "showenvironment power" should be turned off for XCP1091

    6899517 Update sethttps man page to show 100-char max for self-signed web server

    XCP 1090 EOL Released 28 Aug 2009 ( All M-series )

    CR # Synopsis

    6693088 XSCF User's guide example incorectly states command is for ISN network

    6723884 how to import a certificate chain for LDAP server

    6741855 The expiration date format for passwd CLI does not follow that of the locale.

    6768750 The last update time on the masthead is not updated by "REFRESH" button

    6819859 XSCF User?s Guide figure 8-1 - flush memory, should be flash memory

    6867325 no snmp trap for deleteboard with disconnect option

    CR # Synopsis

    2174505 missing DB files results in SCF unbootable.

    6636243 Injected kdue error on domain caused DC1 XSCF version 2910 to panic and stucked at uboot prom

    6669346 showhardconf says DIMM degraded, replacefru says DIMM normal

    6704911 M4000 XSCF should not indicate "Power recovery" or put the PSU DC LED on until the PSU has recovered

    6729779 Power redundancy testing on FF systems causes components to be marked faulty

    6751151 The help statement of '-c' option of 'setdumphost' is misleading.

    6756464 OPL Ikkaku:During OPS MPQT test 2 systems had not reproducebale poweron fails

    6773905 Request for new CLI which clear IOBox fault state with fieldeng priv

    6789847 setnetwork allows IP addresses to be set to invalid addresses that break the ISN network

    6802613 adduser CLI does not accept user names with CAPS

    6804977 Document a login timeout's affect on account lockout feature

    6808532 Cannot be obtained MIB information after switchover happened.

    6814729 SunMC will be supported o Partner Branded system

    6823219 libdca change needed for showdevices ecache size

    6828180 5.5MB L2 Cache support for Jupiter+

    6829233 SNMP returns NIC status of DSCP wrongly.

    6829718 Messages needed when main power is cut off during power loss recovery

    6831733 SNMP Jupiter+ support

    6835875 Cannot enable https when a blank has been set to the organizationalunit

    CR # Synopsis

    6581684 ipsec_check_inbound_policy mesages after SP failover

    6639445 Device Status summary output needed at the end of POST testing

    6757614 BUI supports the fixing of network CLIs which was changed in XCP1984.

  • 6/13/2014 Document 1380260.1

    https://support.oracle.com/epmos/faces/DocumentDisplay?_adf.ctrl-state=7pe8kyj59_46&id=1380260.1 9/15

    6801549 Due to fix for 6704911(INCS3-080719-001), we need to handle more sysevent of Power failure

    6827259 M3000 XSCF MIB does not report the value for the serial number of psu with an AC failure.

    6849208 Trace enhancement for IOManager

    6849663 Please change audit header and snapshot, due to change of INCF3-090526-002.

    CR # Synopsis

    6635693 OPL should notify the user when components are configured wrongly

    6783961 lan#0 (XSCF failover IP-inteface) IP-address cannot be resolved locally

    6829469 Misconfigured CMU / IOU in M5000 not logging fix from CR 6635693

    6845285 Add new CLI to show date offset of Domain.

    6845781 setntp and setsnmp require DNS resolution,but this restriction is not documented anywhere.

    6856272 OPL-SP-MIB.mib has syntax errors

    XCP 1082 EOL Released 29 May 2009 All Platforms ( All M-series )

    CR # Synopsis

    6757473 OPL User Guide should included information about log rotation on log archive host.

    6765468 When the timezone other than three characters has been set, the error logs cannot be displayed

    6789806 XSCF User?s Guide (819-6202-14) contains misleading information on Dual Power Feed Administration

    6797555 Telnet service stops without XSCF resetting after "settelnet -c disable"

    6857944 setroute -m for -n 0.0.0.0 is unclear

    CR # Synopsis

    6548602 When XSCF release number does not end in nn.mm.0000, an event messages needs to be printed at login

    6735711 setemailreport behaviour is wierd.

    6744013 Date indicated by email report is incorrect when DST is enabled.

    6805455 arp_announce should be set to 2 in sysctl.conf

    6814728 fmd initialization takes longer. It result in losing error log.

    6816465 Script error occurred on User Manager page.

    6821960 OPL-SP-MIB.mib has inverted order in scfModeSwitchEvent

    CR # Synopsis

    6584843 Email Reporting: Some text strings are out of position in IE vs Firefox

    6589414 Audit Properties: Narrowed the Event Class at Audit Event Settings

    6608959 frudump utility does not recognize XSCFU_B#1 in DC system

    6614835 Standby always shows "execute S99tmp_login -- exited(1,0)"

    6623945 Community String Username on SNMP Properties page can be specified only up

    6623949 User Manager page stores the 9999999999 input as 2147483647 or -1 for

    6626187 USM/VACM/VACM view/VACM view access on SNMP Security page can be set the different max characters

    6633118 fmtopo which is called by snapshot does not balance scdb_open and scdb_close.

    6652700 'prtfru -x -M xxxx' cause Segmentation fault (core dumped)

    6667077 Sun brand masthead on standby XSCF does not fill out the background image

    6698356 'shownvram' shows non-existant CPUM and MEMB info on FF2 having only one system board present.

    6713810 setsmtp asks for mail server name but accepts only IP addresses if a name service is not running.

    6714850 setupplatform should not request a platform power cycle after setting the altitude.

    6717438 need "showplatform -p mac" function in xscf to get domain system mac without go to obp

    6723305 BUI cannot correctly display the summer time.

    6734322 'flashupdate -c check' needs improvement

    6742395 SNMP trap is not issued when power failure or power recovery happens.

    6742502 Non-audit log size limit value in BUI displays only last two digits of the value.

    6745289 panel_seeprom_restore always returns the return code from panel_seeprom_close

    6745304 inconsistency in the length of ldap bind name field in the BUI

    6749184 erasenvram doesnot erase top 128 byte of DIMM SPD, and cannot repair by copynvram command.

    6756052 BUI Panic Log page cannot be displayed the panic message portion.

    6763349 A confusing warning message of "Domain Mode Configuration" page

    6765466 The information related to the defined LSB cannot be displayed on bui

    6767612 Although warning error log been taken by PCI access error, it cannot be taken on the monitor

    6772115 SNMP trap enchancement

    6775239 rebootxscf manpage should have a note that domains keep running

    6775857 BUI: Implement comprehensive fix for browser caches external javascript/css files

    6778132 DB sync time out may still happen (in XCP1072 and above) during replacefru XSCF

    6784775 OPL POST needs to correctly handle Reserved DLLPs vs Oberon/FLP

    6786707 Loss of a single PSU on a M4000 resulted in domain shutdown & system poweroff

    6786770 NPT prefer setting should be configurable by customer.

    6789113 Trace enhancement on Sun's module for DSCP and SCDB.

    6790005 Add SNMP Trap host does not give user chance to re-enter the missed required (*) field

    6793901 power management enhancements: Air Flow and Power Source

  • 6/13/2014 Document 1380260.1

    https://support.oracle.com/epmos/faces/DocumentDisplay?_adf.ctrl-state=7pe8kyj59_46&id=1380260.1 10/15

    6799922 clearfault does not work for MBU_A

    6801476 snapshot needs to use "showdomainmode -v" to collect showdomainmode output

    6804324 showdomainmode manpage needs to reflect changes in CR 6717438

    CR # Synopsis

    6797557 DBS downs during domain poweron poweroff running test.

    6801356 /scf/init/scf_initrc/10cmemready/S21daemons generates a corrupted root crontab file

    6812005 trap enhancement correction

    XCP 1081 EOL

    CR # Synopsis

    2163631 man pages for new CLIs (setloginlock, showloginlock) should be added

    6635040 SSH to XSCFU via DSCP should be customer controllable

    6788348 OPL-SP-MIB.mib contains duplicate OIDs

    6793898 update setaltitude man page to indicate XSCF reboot is required, but not platform power cycle

    CR # Synopsis

    6585331 IOUA is not programmed with Sun and Partner part number

    6601940 clearfault needs better description when FRU belongs to an active domain.

    6619590 libumem hook does not work properly when thread is being forked.

    6635059 multiple failed login attempts to the XSCF should lockout the account

    6644971 clearfru prints incorrect message when it cannot clear a fault

    6668290 snmpd downed due to libumem issue.

    6675409 If COD license was increased during DR operation, CPU might become

    6713881 Incorrect flashupdate error message leading to unnecessary HW replacement

    6716495 times() function may not be used appropriately.

    6722798 XSCF reset during flashupdate allows wrong OBP/POST to be applied to XSB and running domains

    6722810 cleaning up hcp temporary space (/hcpcommon/tmp) should be automated

    6732712 fmtopo -V shows wrong information for ddc_b on FF.

    6742457 Case insensitive string to change audit log limit to "unLImited" in BUI is failing.

    6743183 OPL SC FMA DE fails to report expected ereport, fault-event in response to the power failure event.

    6743842 password requires [user] argument

    6747279 BUI logarchiving page's 'Recent Error Messages' should not be a editable text box

    6749980 SNMP-Enable/Disable pop-up window doesn't give user chance to re-do if missed the required field.

    6749997 XSCF needs to get up to date on DST rules changes

    6754066 'restoreconfig' CLI usage output in Service/Escalation mode should include '-f' option.

    6754071 The error message should be re-phrased when '-f' option of 'restoreconfig' used in 'normal' mode.

    6754508 scfSystemPowerLED value on OPL-MIB is not correct.

    6755112 showstatus indicates CPU/MEM as deconfigured state

    6755113 XSCF panic might happen in flashupdate processing.

    6755986 BUI: Session Error on Add Audit Policy popup screen after Reset button is clicked with IE6/7

    6757064 Flashupdate failed by the repeated flashupdating between XCP1983 and XCP1984

    6757776 Snapshot collects only partial Sun MC data due to a permission problem

    6759468 'setdumphost' can't succeed in service mode.

    6759532 snapshot should take a log for the iptables information along with the fix of INCF3-080711-001

    6759987 Running 'showdumphost' in service mode clears dumphost setting set in escalation mode.

    6760521 The cached page might be displayed on BUI pages.

    6762110 Add "showloginlockout" to snapshot

    6764855 Attempt to clone a user with already existing username results in "Internal Server Error" in BUI.

    6767417 Simple Diagnostic Engine files do not include SPARC64-VII entries

    6769868 Add fault rule for IOUA i2c failures

    6772968 snapshot should collect a 'showroute -a -n' output

    6773750 SNMP power management

    6773810 older Partner Ultra 320 SCSI Card Fcode Aborted issue

    6786026 man page enhancement of dumpconfig '-c' option is needed.

    CR # Synopsis

    6644091 core.ce-warn should not subscribed by domain. (QA-DC-0932)

    6743341 ping/telnet connection can be established to XSCF-LAN#0 I/F by using DSCP ip address

    6744839 Partner side code fix for SSH to XSCFU via DSCP should be customer controllable

    6775856 BUI: Implement temporary fix for browser caches external javascript/css files

    6776532 login failure messages are always displayed on SCF console

    XCP 1080 EOL

    CR # Synopsis

    6545088 There is no indication of "warmup" in the event log...

  • 6/13/2014 Document 1380260.1

    https://support.oracle.com/epmos/faces/DocumentDisplay?_adf.ctrl-state=7pe8kyj59_46&id=1380260.1 11/15

    6689852 NTP communication between domain fails after DSCP network configuration changes until SCF reboots.

    6696502 Workaround put in place for FPGA scrubbing due to 6566540 should be removed.

    6705870 LDAP login schema does not require homeDirectory or loginShell

    6718820 Frequent occurrence of /OPNL#0,/SNSU,*:SCF:TWI access error- despite multiple component replacement

    6735710 Message "A_pprcir.so to test host 'host name' failed" might be displayed

    6740203 Ikkaku OBE: Install doc provides no guidance on need for serial port(male DB9)and USB serial adapter

    CR # Synopsis

    6579253 FF/DC power line failure does not send SNMP notification/trap

    6618498 setsunmc -s "" - gives Script failed error

    6644490 fmtopo missing output for new cores to support Jupiter

    6687545 SCF FMA IK misc bug fixes

    6687663 M3000 support is to be added to servicetag

    6694376 Sun MC needs to support OPL IK model

    6695866 New fault rules need to be added to fix INCS1-080221-001

    6699196 Create a new scf_trace region for dbs to improve diagnosibility

    6700019 setupplatform needs to support M3000 system

    6700025 getflashimage needs to support M3000 system

    6700779 SNMP needs to support OPL IK model

    6703402 "restoredefaults -c xscf" can be executed on standby.

    CR # Synopsis

    6681287 DBS got an error(QA-DC-0973)

    6698396 Logarc unit tests are failing

    6702492 setsunmc should use host ip from database when takeover ip is disabled

    6706213 Update SCF.dict and SCF.po files for 'serious' I/O errors and overvoltage fault.

    6706348 show_scf_trace should report information about begin and end date/time of each region and trace file

    6712009 BUI User Manager screen issues setprivileges CLI with improper argument

    6723546 the new command restoredefaults needs to be documented in the XSCF reference guide

    CR # Synopsis

    2161838 Executing shownvram w/ /MBU_B/FPGA" on FF system shows OBP instead of FPGA.

    2164613 The BUI Domain Operation page mistakes the operation demand for DID#08

    6523740 Need ability to do off-platform backup and restore of XSCF configuration.

    6664134 "fmadm faulty -a" on SCF is not reporting a fault when showstatus displays the faulty component

    6682929 Two BUI sessions has the same session index number

    6688868 snapshot conf file must be updated for M3000 unsupported CLIs

    6695841 snapshot needs to change timeout for fmtopo command

    6695890 snapshot does not collect all information without escallation mode.

    6701659 auditd unit tests are unstable

    6702356 libcurl needs to be upgraded to 7.17.1

    6708053 introduce libcurlhelper.so helper library

    6709255 "nvflag_check disable" returns incorrect response for installed/factory

    6711370 scdb_read() error occurred during domain power-on.

    6714164 update libetmfilter to recognize Ikkaku MEM format

    6716494 some ereports are not diagnosed correctly.

    6716864 Unable to build Ikkaku gate for DC

    6718189 audit.h update request

    6718649 libfrustatus using wrong DB entries to look up PN and SN

    6721895 In IK MB fru data must be retrieved from XSCFU fru info; voltage sensors need to conform to showenv

    6723773 Fix iou/ddc fault rule for Ikkaku

    CR # Synopsis

    2162599 DB sync time out happened during replace FRU.

    2164611 Configuring of SAS card failed by OS rebooting.

    2164612 The /var/log/messages file gets filled up with ntp debug messages.

    2165373 Sequence process submitted the RCI event notification in incorrect timing.

    2165579 log archiving limits are still disabled in 1071

    2165840 104x incorrectly routing for lan#0 will cause takeover ip to not work in XCP105x or later (106x, etc

    2166682 XSCF should shutdown platform by exceeded temperatures rather than fan loss

    6596993 applynetwork outputs confusing info when there are no updates to be made

    6614427 prtfru displays incorrect IPMI date field

    6627865 IO related fault log which is reported by Solaris via ETM, does not contain

    6653783 applynetwork should return an error if hostname=localhost and IP address is not 127.0.0.1

    6665174 DR deleteboard/addboard degrades IOU

    6669369 XCP applynetwork says variables not set when they are

  • 6/13/2014 Document 1380260.1

    https://support.oracle.com/epmos/faces/DocumentDisplay?_adf.ctrl-state=7pe8kyj59_46&id=1380260.1 12/15

    6678956 Exec replacefru on M8000 BP_A's DDCs results in their check LED in maintenance mode

    6679286 "Segmentation fault" occurs when giving less than 8 characters passwd after 'setsnmpusm passwd' cli.

    6689632 showtimezone -c dst should display standard as well as custom DST settings

    6704043 scf_trace_analyze causes segmentation fault in proc_cmd.trc

    6709441 Both XSCFs on DC system might be detected the reboot retry-out

    6712056 Spelling mistake in the help message during "restoredefaults" execution

    6713429 additional enhancements for dumpconfig/restoreconfig CLI

    6713787 restoredefault -c factory does not clear the dcl / restore dcl to one domain including all hardware

    6716551 SCF command to read DIMM serial number fails.

    6717594 XSCF reboot gets into a loop with "process down [/scf/sbin/ttyd] (pid=710, term=6)".

    6723419 prtfru shows almost all 0 on IK system

    6725315 enablecodboard can be executed on IK in Partner brand with fieldeng privilege.

    6725809 DVD#1 is not diagnosed appropriately.

    6728737 When two fan failures on the different fan-trays which belong to the same

    6729224 Restoring configuration database fails on SP due to can't find "/scf/private/reloadconfig".

    6729758 Add and modify some ereports for IKKAKU

    6729773 Reboot after site-wide power failure causes numerous DC1 components to be marked faulty

    6729776 Site-wide power failure causes many DC3 components to be marked faulty/voltage warnings on reboot

    6729856 Initial data set by setdomparam set-defualts option is different with

    6730225 Seen a lot of BUI html errors through Firefox html validator

    6734057 Unsupported CLIs are available with service mode.

    6737740 BUI displays "No Response" alert error and is non-functional using Firefox 3 web browser.

    CR # Synopsis

    2166507 XCP man page for setdomparam as typo errors

    6620681 shownvram does not show Group B memory

    6674742 FMA and DR stress can cause the fma commands to fail on SCF

    6716103 fmd: event-transport request to create an auxiliary thread exceeds module thread limit (8)

    6723195 raidctl does not work for Mx000 platforms

    6738494 BUI: Pop-up setting/confirmation windows fail to display with IE6

    6738503 BUI: Session Error on LDAP page with IE6

    6739070 Error message while entering negative value in BUI setcod is misleading

    6739071 BUI does not accept headroom value '-0' whereas CLI accepts it

    6740099 restoreconfig -f option does not work

    6741074 dbdump does not handle multiple arguments

    6742279 'M3000' is not mentioned under "Using the XSCF Web" on BUI main page.

    6742337 Provide NVRAM Scrubber support for M3000 platform

    6743116 Spelling mistake in output of 'man setarchiving'

    6747138 Workaround for INCS3-080625-001(OPNL access error) is necessary.

    XCP 1072 EOL ( M4000, M5000, M8000, M9000-32 and M9000-64 Only )

    CR # Synopsis

    2162561 FF/DC power line failure does not send SNMP notification/trap

    2162783 New fault rules need to be added to fix INCS1-080221-001

    2162874 Update SCF.dict and SCF.po files for 'serious' I/O errors and overvoltage fault.

    2163001 Change I/O ereports from 'fatal error' to 'serious error'

    2163491 Both XSCFs on DC system might be detected the reboot retry-out

    2164098 Create a new scf_trace region for dbs to improve diagnosibility

    2166681 XSCF should shutdown platform by exceeded temperatures rather than fan loss

    6667692 DB sync time out happened during replace FRU.

    6680705 Clearfault manpage needs to have examples for use on the iobox.

    6700185 The /var/log/messages file gets filled up with ntp debug messages.

    6700222 Configuring of SAS card failed by OS rebooting.

    6705272 The BUI Domain Operation page mistakes the operation demand for DID#08

    6705415 XCP man page for setdomparam as typo errors

    6709701 log archiving limits are still disabled in 1071

    6722617 Sequence process submitted the RCI event notification in incorrect timing.

    6723549 The man page of the new command restoredefaults needs to be improved

    XCP 1071 EOL

    CR # Synopsis

    2161616 DBS got an error(QA-DC-0973)

    2162988 show_scf_trace should report information about begin and end date/time of each region and trace file

    6545482 XSCF archiving generates a huge amount of data

  • 6/13/2014 Document 1380260.1

    https://support.oracle.com/epmos/faces/DocumentDisplay?_adf.ctrl-state=7pe8kyj59_46&id=1380260.1 13/15

    6566540 Executing shownvram w/ /MBU_B/FPGA" on FF system shows OBP instead of FPGA.

    6571840 panel_dongle status needs to be logged

    6615720 Customers are requesting ability to restore a system to factory default state

    6630959 BUI changes for user name restricted to less than 32 characters

    6645828 "Could not write FRU-ID status" is detected

    6654373 Man page should designate when sendbreak won't work

    6655686 XCP updates needed to support new FF I2C fan controller chip

    6660264 There needs to be two types of XSCFU serial I/F ereport.

    6661840 Description of setdscp/showdscp is unclear

    6663500 showhardconf shows incorrect part number of IOX PS and Link card

    6664046 snapshot should collect 'getflashimage -l'

    6666291 Snapshot needs to collect the Sun MC logs for trouble shooting.

    6667079 solution for OBP environment variables corruption issue

    6667083 IOUA information can not be displayed with cfgdevice -l.

    6667088 check xscf#0-if's IP and xscf#1-if 's ip are on same subnet

    6667626 adduser man page should change the maximum user name length to 31 characters

    6668614 Undocumented platform power cycle is required before SPARC64-VII can be added.

    6670773 No specific document for OPL products regarding RMK Slide Rail movement range

    6671232 There is a case that following message is displayed to the domain console.

    6677063 RFE: Add "fmstat -a -m emailprv" to snapshot

    6677958 FMA-'showlogs error' discrepancy reg degraded component

    6679354 XSCFU_B#1 is degraded wrongly with the follwoing errorlog.

    6683763 missing DB files results in SCF unbootable.

    6685374 Power-on failed after XCP was updated to XCP1070 and Jupiter CPU was installed

    6685376 Serial hangs when LAN cable is connected with NETDEV WATCHDOG happened.

    6685379 XSCF changed from XCP1050 so that console logs out from Solaris

    6685382 showdomainstatus -a displays "PowerOFF" even though the target SB is not assigned

    6685384 System degradation by DIMM error was not performed even if config-policy

    6687734 XBU failure causes XSCFU reboot loop

    CR # Synopsis

    6473379 POST Test Sequence names need to printed along with the sequence numbers

    6528600 snapshot needs configuration file restucturing

    6543189 OPL DC Fans report "High speed" when off

    6559060 XCP inaccurate timeout estimate for diagnostic test when executing XSCF command "replacefru".

    6574841 Nothing is shown about trouble info area by prtfru for XSCFU

    6583053 104x incorrectly routing for lan#0 will cause takeover ip to not work in XCP105x or later (106x, etc

    6588200 potential deadlock due to lock ordering in user management code

    6589870 User accont consist of 32 characters results in the incorrect permission

    6590866 syslogd must be started earlier in 00startup to collect DBS messages

    6598444 DB error and memory leak happened during 24 domain p-on/off running test.

    6612827 libpartconf does not check Active before CMEM recovery (QA-DC-0882)

    6618833 Need to Modify Some Display on Partner BUI page

    6622856 showhardconf always shows "Cabinet Power Off" for System_Phase

    6626181 BUI COD page displayed the different data with CLI. (QA-DC-0907)

    6626183 License key deletion could not be executed on BUI COD page. (QA-DC-0908)

    6626779 auditd downs on XCP1961

    6626912 The confdidr command should not be available on Sun brand system

    6628419 IOX access error is detected.

    6632063 Pop-up alert message is spelt incorrectly on the 'Time' page of the BUI.

    6635895 audit.h update request

    6641765 Manpages for setdomainmode and showdomainmode need to be updated for SPARC64-VII support

    6641768 Manpages for setprefetchmode and showprefetchmode need to be added for SPARC64-VII support

    XCP 1070 EOL

    CR # Synopsis

    6570300 deletefru requires grammatical changes

    6593942 Faulted XSCFU is not being reported by showstatus

    6623867 'setupplatform -p timezone' does not return correct message with timezone '559'

    6623887 manual page needs to be updated for 'setupplatform'

    6623941 MSG-ID for Jupiter is not appropriate.

    6625938 clean up entries in classes-unapproved.sde after portfolio approval

    6629876 Update FMA SCF.dict and SCF.po files for misc bug fixes

    6636985 When audit trail is full and audit policy is set as suspend,

  • 6/13/2014 Document 1380260.1

    https://support.oracle.com/epmos/faces/DocumentDisplay?_adf.ctrl-state=7pe8kyj59_46&id=1380260.1 14/15

    6639839 Certain errors detected by OBP should not mark an IOU as degraded

    6639902 change SCF fault rules: boot failures should not mark fru faulty

    6641007 dualprocess should check for conflicting IP before using the default values for eth2 (ISN)

    6641149 XCP README Changes Requested

    6642805 Docs should describe how to upgrade stand-by SCF

    6649341 showstatus indicates no failure, but Check LED(on OPNL) is lit

    6649793 snapshot config file needs to add 'showprefetchmode'

    6652686 PS becomes Degraded after disconnect one of the AC cable

    6654344 update fma msg content based on FMA portfolio review

    6659707 An XSCF HTTPS certificate expiration is 10 years

    6661123 Update POST to XSCF notification to prevent CMU from being incorrectly "Degraded"

    6661837 Jupiter CPU Module DDCs came loose after Z-Axis vibration test.

    6667026 off-platform dbdump is not backward-compatible

    6667393 viewauditapp does not use snapshot timezone

    6668110 "* XSCFU_B#0 Status:Degraded;" occurred after issuing rebootxscf or xscf upgrade.

    6672389 ability to examine logs in snapshot dumps on x86-Solaris machines is required

    6677338 Document how to resume XSCF when audit trail is full

    XCP 1061 EOL - To obtain XCP1061 open a Service Request in My Oracle Support

    CR # Synopsis

    2157293 change SCF fault rules: boot failures should not mark fru faulty

    2157791 Certain errors detected by OBP should not mark an IOU as degraded

    6577801 showdomainstatus still shows "Running" after sendbreak to domain and domain is at OBP prompt

    6645560 CLI might be hung if showhardconf CLI competed with IOMGR processing

    6645572 OBP environment variables corrupted during domain boot

    XCP 1060 EOL

    CR # Synopsis

    6496324 Can not login by telnet by the 20 users.

    6544855 Warm-Up Time admin commnet in XSCF User's Guid is not correct description for FF system

    6544899 No comments about between shutdowndelay function and UPC port one in XSCF user's guide

    6580502 FMA does not recognize "PSU shortage", classifies undiagnosable_problem

    6590678 showsunmc/setsunmc will have platop, fieldng priv added, man pages must match

    6608374 Fault cleared at NFB-on when the keyswitch is in the Service position

    6616244 iomgr reports errors if slot is powered off during fru discovery

    6618876 Remove recommendation to use OPL SC as the NTP server for domains

    6623652 Communication failure between XSCFUs (LAN interface re-link) after rebootxscf

    6632311 High risk of customer fails for slow fan speed if upgrade to XCP1050 on OPL-FF1

    XCP 1050 EOL

    CR # Synopsis

    6526186 DC IOUA hot-plug does not work

    6536105 Man pages for getflashimage and Intro need to be put back to build, inlcluded in ref man

    6557379 Message about AC redundancy for DC (M8000/M9000) must be enhanced in the documentation

    6557927 Request to deliver FFx with IEC320 C20 / IEC320 C19 AC cables instead of IEC320 C20 /

    6573007 how to update to dual XSCF(XCP 1050) on customer DC machines running XCP 1040 and 1041 ?

    6580476 power cord AC input fail on dual-grid DC1 prevents system power on

    6584888 clearfault: OPNL wrong for M9000

    6588092 System CHECK LED not set, even though frustatus_check_sun_system_led_status returns "on"

    6589301 'ereport.chassis.i2c.intr-fail' shown after scf failover

    6589382 Log Archiving page does not take counter-measures for CSRF (QA-DC-0789)

    6589635 configure on io slots fails when "Oberon leaf reset is not completed"

    6590395 XSCF hang is detected, because /scf/private/um_restore_configs takes long, and hold dualprocess.

    6591423 Sequence process down occurred during p-off/on and switchover test. (QA-DC-0816)

    6598863 Autologout Administration: Setting timeout to non-Integer renders BUI unusable (Session ID expired).

    6599088 DB sync T.O happened during switchscf running.

    6600184 setdefault does not clear root account.

    6606873 BUI allows login as 'admin' user

    6638790 FMD-8000-11 generic error message generated for serious CPU CE

    XCP 1041 EOL

    CR # Synopsis

    2148354 COD error message(Headroom/VIOLATION/Overcommitment) output to the XSCF console only.

    2148355 CODD thinks FAILED CPUs are in use

  • 6/13/2014 Document 1380260.1

    https://support.oracle.com/epmos/faces/DocumentDisplay?_adf.ctrl-state=7pe8kyj59_46&id=1380260.1 15/15

    2148356 "moveboard" command fail in the following case.

    2148357 When bring up domain with COD CMU, I2C dead lock occurred.

    2148746 intr-fail was reported under high temperature environment

    2148747 'ereport.chassis.device.fan.tooslow' seen when remove/insert the ps

    2148748 Force to poweroff both PSs in IO box shows confused error message

    2148856 RFE Partner would like to Sun to change error level of IO Erorr

    6537025 reboot counter must be cleared when platform is power-cycled

    6537996 closing bui browser window while downloading xcp image, will result in very large XCP image on XSCF

    6538022 Oops: Exception in kernel mode, sig: 5 [#2]

    6538035 download a very large file result in system error

    6538319 snmpd log file rotation doesn't work correctly

    6538965 prtfru not displaying iobox SN (Label=IOX@???)

    6542577 XSCF reboots with process down [/scf/sbin/cmd] during DR testing.

    6548177 Linux daemons restart causes XSCF reinitialization then panic/reboot.

    6550011 XSCF provides to solaris the serial number/part number of CMU#0's dimms for ALL CMUs

    REFERENCES

    NOTE:1393702.1 - Sun SPARC(R) Enterprise M3000/M4000/M5000/M8000/M9000 (OPL): XCP FAQs