Upload
vukhanh
View
232
Download
0
Embed Size (px)
Citation preview
World Class Filtration Solutions
Filtration Catalogue Product Range 2017
Porvair Filtration Group
Filtration Catalogue Product Range 2017
www.porvairfiltration.com
4
Co
nte
nts
by
Pro
duc
tPo
rva
ir Fi
ltra
tion
Gro
up
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
INTRODUCTION
Introduction to Porvair Filtration Group
6-7
Our Locations 8-9
Product Innovation, Manufacturing, Testing and Quality
10-11
PRODUCTS
CLEANABLE FILTER ELEMENTS AND CARTRIDGES
12-13
Sinterflo® F Sintered Metal Fibre
Cylindrical 14-15
Pleated 16-17
Sinterflo® P Sintered Metal Powder
Cylindrical 18-19
Sinterflo® M Metal Mesh
Cylindrical 20-21
Pleated 22-23
Sinterflo®MCSinteredMetalComposite
Cylindrical 24-25
Candle Filters
Candle Filters (forpolymermelt) 26
Rempak™CandleFilters(forpolymermelt) 27
PleatedFilterElements(Aerospace)
PleatedFilterElements(Aerospace) 28
LEAF DISC AND SOLID PLATE FILTERS 30-31
Leaf Discs (forpolymermelt) 32
Solid Plate Leaf Disc Filters (forpolymermelt) 33
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
34-35
PleatedFilterElements(Aerospace)
PleatedFilterElements(Aerospace) 37
Pre-Filters
Carbofil™ 38-39
Cryptofil™ 40-41
Klearfil™ 42-43
Microfll™ 44-45
Polyfil™II 46-47
Tekfil™ 48-49
Tekfil™GV 50-51
Trapfil™ 52-53
MembraneFilters
Aquafil™ 54-55
Biofil™II 56-57
BiofilPlus™ 58-59
Chemifil™ 60-61
Fluorofil™ 62-63
Fluorofil™Plus 64-65
Fluorofil™F100 66-67
Hydrofil™ 68-69
Hydrofil™Plus 70-71
Vinofil™ 72-73
Junior Pre-Filters
Microfil™Junior 74-75
Polyfil™Junior 76-77
JuniorMembraneFilters
Biofil™Junior 78-79
Fluorofil™Junior 80-81
Ventafil™ 82-83
FILTER ELEMENT AND CARTRIDGE HOUSINGS
84-85
Filter Housings 86-87
High Pressure Filter Housings 88-89
5
IN-LINE AND LAST CHANCE FILTERS 90-91
Metallic In-Line and Last Chance Filters
Metal Mesh Filter Discs 92
Metal Fibre Filter Discs 93
Metal Powder Filter Discs 94
In-LineElementsandScreens 95
Union Filters and Miniature Housings 96
In-line Filter Housings 97
FinalInkFilters 98
In-Line Filters (30mm,StainlessSteel) 99
PleatedUnrimmedDiscFilters 100
Microdisc™3SS 101
Microdisc™4SS 102
Grid Filter and O-Ring 103
GasPro™GasketFilters 104-105
GasPro™Sinterflo® P Powder Filters 106-107
GasPro™Sinteflo®FFibreandPVFilters 108-109
PolymericIn-LineandLastChanceFilters
GasPro™HighPurityTeflonFilters 110-111
Microdisc™1PA(15mmS-VentDiscFilter) 112
Microdisc™2PA(25mmS-VentDiscFilter) 113
Microdisc™3PS(33mmDiscFilter) 114
Microdisc™4PS(45mmStandardDiscFilter) 115
Microdisc™4PV(45mmPre-PumpDiscFilter) 116
Microdisc™7PS(74mmDiscFilter) 117
Bullet Filters 118
In-Line Filters (PEEK) 119
In-LineUVFilters(PEEK) 120
LastChanceInkjetFilters 121
DISPOSABLE CAPSULE FILTERS 122-123
Microcap™ 124
Microprint™ 125
Microjet™ 126
FLUIDISATION AND POWDER HANDLING UNITS 128-129
Sinterflo® P Metal Powder Aeration Units
130-131
Sinterflo® MC Fluidising Media 132-133
Vyon®PorousPolymerFluidisingMedia 134-135
FLOW AND SOUND CONTROL 136-137
Sinterflo® MC Filter Plates 138-139
GasPro™ Restrictive Flow Products 140-141
GasPro™ChamberVentDiffuserFilters 142-143
BatteryVentsandFlameArrestors 144
Sinterflo® P Porous Powder Cylinders 145
Porous Cups and Bushings 146
Spargers 147
Vyon® Silencers 148-149
DISPOSABLE DIFFUSED AERATION UNITS 150-151
Vyon® Disc Diffusers 152
Vyon® Tubular Diffusers 153
SPECIALITY PRODUCTS 154-155
StabifilTM 156-157
AUXILIARY PRODUCTS 158-159
Differential Pressure Indicators 161
MEDIA AND MATERIALS 162-163
Metals
Sinterflo® F Metal Fibre 164
Sinterflo® P Metal Powder 165
Sinterflo® M Metal Mesh 166
Sinterflo®MCMetalMeshComposite 167
Polymers
Vyon® 168-169
BioVyon™ 170-171
ORDERING GUIDE
Sinterflo®CleanableFilterElementsandCartridges
174-176
Cartridge Filter End Cap Adapters 178-179
CartridgePre-filtersandMembraneFilters 180-181
Junior Cartridge Filters 182
FilterElementandCartridgeHousings 184-185
Metallic In-Line and Last Chance Filters 186-187
PolymericIn-LineandLastChanceFilters
188-189
Disposable Capsule Filters 190-191
INDEX 192-200
TheCompany
6
Intr
od
uctio
nPo
rva
ir Fi
ltra
tion
Gro
up
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Porvair Filtration Group is an international leader in the developmentandsupplyofmaterialsandproductsforapplicationsinfiltrationandseparation.
PorvairmanufactureintheUK,USAandChinaandhaveanextensivenetworkofsalesofficesanddistribution channels throughout the world. Our expertise is wide and varied, with products used in marketssuchas:
• Aerospace and Defence • Food and Beverage • Gasification • LifeSciencesandScientific • Microelectronics • Nuclear • Pharmaceutical • Porous Media and OEM Materials • Printing • Process • Transportation • Water
Our ongoing success is based on a dedication to technicalexcellenceandsuperiorcustomerservice.Ourfuturewillbebuiltonourinvestmentinresearchanddevelopmenttoprovideinnovativenewproductsthatexceedtheexpectationsofourcustomersinsolving the challenges that they face.
Aerospace and Defence
Porvair Filtration Groupdesignsandmanufacturesspecialistfiltrationequipmenttomeettheexceptionaltechnical challenges of the aerospace and defence industry,forcontaminationcontrolandconditionmonitoringinhydraulic,fuel,lubrication,coolantandairsystems.
Ourfiltersprotectvitalsub-systemsinaircraft,helicopters,militaryvehicles,missilesandspacecraftsuchasflightcontrols,fuelmanagementandinertingsystems,thrustreversers,coolantsystems,brakingandsteering,powergenerationandairintakes.
Food and Beverage
Porvair Filtration Group’srangeoffiltersareinstalledtoeffectivelyremoveparticulates,yeast,mouldsporesandbacteriaforuseinapplicationssuchas:wineries,breweries,cider,mineralwater,softdrinks,foodanddairy,culinarysteamsterilisationandsanitisation,powder handling and sparging.
Ourproductsaremanufacturedunderstrictqualityprocess controls and are fully validated and technicallysupportedbyourqualifiedscientistsandlaboratoryservices.Ourpolymericfiltercartridges,manufacturedfromFDA-approvedmediaundercleanroomconditions,includeawiderangeofendadaptorstoenableeasyretrofittingintoneworexistingcompetitorhousingsandallmembranefiltercartridgesare 100% integrity tested during production.
Gasification
Porvair Filtration Groupisactiveinanumberofareasconcerning the generation and safeguarding of energy production. We are leading innovations in gasificationtechnologiestoenabletheproductionofsyntheticnaturalgas(syngasorbiogas)aspartofalternative clean energy techniques.
Life Sciences and Scientific
Porvair Filtration GroupmanufacturearangeofBioVyonTMsinteredporousplasticmaterialsandproductsforthebioscienceandscientificindustries.Manufacturedtocurrentgoodmanufacturingpractices(cGMP),theBioVyonTMrangeismadetodemandingregulatorystandardsasrequiredbytheWRAS, FDA and USP.
7
Microelectronics
Porvair Filtration Group offer a range of high purity gas filtrationproductstothesemiconductormarket,aswellastoOEMsuppliersinthemicroelectronicsindustry.Applications for this product range include gas safety management,exhaustventingsystems,flowcontrol,massflowcontrol,needlevalvereplacement,laminarflowdiffusing,pressuresnubbingandflamearresting.
Nuclear
Porvair Filtration Group has over 35 years experience in supplyinghighqualityfiltrationsolutionstothenuclearindustry.Workingacrossthefuelcycle,weoffersolutions to the power generation, fuel production, reprocessing,decontamination,decommissioningandwastepackagingsectors.
Pharmaceutical
Themanufacturingofourhighperformancecost-effective products is underpinned by our quality assuranceprogramme,cGMPpracticesandcleanroomenvironmenttoensureproductsmeetthestringentrequirementsofthepharmaceutical,genericsandveterinarymedicineindustries.ApplicationsfortheseproductsincludesterilefiltrationforLVPandIV’s,sterileairforfermenterfeeds,sterileventfilters,solventextraction,veterinaryproducts,ophthalmicsolutions,sterilegrowthmediaandseraproducts.
Porous Media and OEM Materials
Porvair Filtration Groupmanufactureanextensiverangeofporousmaterialstoprovideoptimumsolutionsforawidevarietyofapplications.Thesematerialscanbe purchased for OEM products or integrated and packagedintofinishedproducts.
Printing
InprintaistheInkjetsalesdivisionof Porvair Filtration Group. Inprinta design andmanufactureawiderangeofin-
lineandlastchancefilterstooffersolutionsforinkjetfiltrationthroughoutthebodyoftheprinter.Theseself-containedfilterassembliesareprovidedforvariedtypesofinkjetapplicationsincludingCIJcoding,textile,ceramicsandgraphics.
Process
Porvair Filtration Group supply the process industries withinnovativeandperformancedrivenfiltrationequipment(elements,cartridgesandvessels).Weprovidehighlyspecialisedfiltrationsolutionsforusethroughoutthemanufacturingprocess,offeringprovenfiltrationsolutionsfortheproductionofavastrangeofchemicalsincluding:nitricacid,maleicanhydride,ether,sulphuricacid,phosphoricacid,sodiumchlorate, solvents as well as HDPE and LLDPE.
Transportation
Porvair’sexperienceandcomprehensiveproductofferingscovereverythingfromsomeoftheworld’slargestinternalcombustionenginestointricateinlinehydraulicfiltersusedfortheprotectionofactuatorsand valves.
Water
Porvair Filtration Group supply a range of diffused aerationproductsforthetreatmentofbothindustrialandmunicipaleffluent.Wealsomanufactureproductstoeliminateorganic,chemicalandotherdebristomeetstringentregulationsfordrinkingwater,aswellasforthechemical,industrial,pharmaceuticalandsciencemarkets.
Our Locations
8
Intr
od
uctio
nPo
rva
ir Fi
ltra
tion
Gro
up
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Porvair Filtration Group’sheadofficeislocatedinSegensworth, UK. The following business units also operateoutofSegensworth:
• Aerospace and Defence
• Energy
• Nuclear
ISO9001:2008,AS9100RevC,EASA(Part21SubpartG)approved.
Porvair Filtration Group Ltd., Segensworth Division 1 Concorde Close Segensworth Fareham Hampshire PO15 5RT UK
Tel: +44(0)1489864330 Email: [email protected]
Segensworth, Hampshire, UK
New Milton, Hampshire, UK
OurNewMiltonDivisionishometoPorvair Filtration Group’sprocessdepartments,whichincorporate:
• Food and Beverage
• Pharmaceutical
• Polymer
• Printing
• Process
ISO9001:2008approved.
Porvair Filtration Group Ltd., New Milton Division Queensway StemLane New Milton Hampshire BH25 5NN UK
Tel: +44(0)1425612010 Email: [email protected]
Wrexham, UK
OurWrexhamDivisionishometothemanufacturingsiteforsinteredporousplasticandmetalmaterials.Thesematerialsareusedwithinthecompanytomakefiltersprimarilyforthechemicalprocessing,gasificationand nuclear industries, as well as a wide range of other applications.
• BiosciencesandScientific
• Porous Media and OEM Materials
• Water
ISO9001:2008approved.
Porvair Filtration Group Ltd., Wrexham Division Clywedog Road South WrexhamIndustrialEstate Wrexham LL13 9XS UK
Tel: +44(0)1978661144 Email: [email protected]
9
Ashland, Virginia, USA
TheAshlandDivisioninVirginiaisourUSAheadoffice,aswellastheUSAmanufacturerformanyoftheindustries Porvair Filtration Group are involved with.
This includes Aerospace and Defence, Biosciences andScientific,Energy,FoodandBeverage,Pharmaceutical,PorousMediaandOEMMaterials,Printing, Process, Nuclear and Water.
ISO9001:2008approved.AS9100RevCapproved.
Porvair Filtration Group Inc., Ashland Division 301 Business Lane Ashland,Virginia23005 USA
Tel: +18045501600 Email: [email protected]
Caribou, Maine, USA
Porvair Filtration Group in Caribou, Maine, focuses onthemanufactureofcustomengineeredporoussinteredmetalpowdercomponentsandassembliesforuseinawiderangeoffiltrationandflowapplications:
• ProcessandAnalyticalInstruments.
• Porous Media and OEM Materials.
ISO9001:2008approved.
Porvair Filtration Group Inc., Caribou Division 15ArmcoAvenue Caribou, Maine 04736 USA
Tel: +12074933027 Email: [email protected]
Boise, Idaho, USA
Porvair Filtration Group in Boise, Idaho, focuses on the manufactureofcustommetalfiltrationcomponentsandassemblieswithporoussinteredmetalandPTFEmediaforuseinarangeofapplicationswithin:
• Semiconductor,Solar/Photovoltaic,HBLED, and Wafer Manufacturing.
• FlatPanelDisplayandHardDiskDriveManufacturing.
Porvair Filtration Group Inc., Boise Division 1226 Caldwell Boulevard Nampa,Idaho83651 USA
Tel: +12084612090 Email: [email protected]
Xiaogan, Wuhan, China
Our Wuhan Division in China provides an operational baseformarketingourextensiverangeofproductswithin Asia.
Porvair Filtration Group, Wuhan Division Chengdong Area SquareIndustrialPark,NorthDistrict XiaonanEconomicDevelopmentZone Xiaogan, 432000 China
Tel: +86(0)7122878955 Email: [email protected]
Mumbai, Maharashtra, India
OurMumbaiDivisioninIndiaprovidesanoperationalbaseformarketingourextensiverangeofproductswithin India.
Porvair Filtration India PVT. Ltd., Mumbai Division Gangotri Glacier Annex, Kavesar OppositeVijayNagari Off Ghodbunder Road Thane(W),400607 India
Tel: +912225976464/+912225976465 Email: [email protected]
Porvair Filtration Group has a policy of continuous improvementinallareasofitsbusiness.Listening tothecustomers’presentandfuturerequirements isavitalpartofouroperationsandakeypartof driving change.
Weunderstandthatproductdevelopmentinvolvesbuildingmultidisciplinaryteams,notonlywithinthecompany,butofteninpartnershipwithourcustomers.Thiscontinuousdevelopmentofproductsandmaterialsis vital, to enable us to offer new and better solutions. Porvairhasimplementedvariousmethodologiestodrive out waste and process variance across the companytoachieveourgoalofzerodefects.
Wehaveadedicatedteamofscientists,engineers,productionandqualityprofessionalsworkingtowardsthebestpossiblefiltrationsolutionsforourcustomers.We have a fully equipped test house and laboratory, and our experienced design engineers use the latest AutoCAD®technology,with3Dsolidmodelling,integratedwithfiniteelementanalysistogivefullstructural assurance capability.
Quality is at the heart of every stage of our operation andafundamentalpartofourculture.WeareISO9001approvedandholdmanyotheraccreditationsforthevarious industries we serve.
Research and Development
Developmentplaysafundamentalpartinouroperations and, as a result, we have developed a numberofcustomdesignedproductsbasedonourestablishedporouspolymericmaterials(Vyon®)andsinteredmetalmedia(Sinterflo®),aswellasdevelopingarangeoffiltersforfueltankinertingapplications.
Althoughweoperateacrossmanyfiltrationandseparationmarketsthereissignificantinteractionbetweeneachdivisionintermsofproductresearchanddevelopment.Thenewproductdevelopmentteamisdrawnfromscientistsandengineersfromacrossall divisions encouraging new ideas and new solutions. The success of this approach has been in theinteractionofchemistsandengineersworkingtogethertofindpracticalsolutionstosomeextremelycomplexscientificchallengesidentifiedinthechosenmarketareas.
Manufacturing
Porvair Filtration Group producefiltersandfiltrationsystems,aswellasarangeofporousmaterials,at production sites within the UK, USA and China. Wemanufactureforawidevarietyofindustrial,pharmaceuticalandbiomedicalapplications,aswellassupplyingfiltrationsolutionsforextremeconditionsoftemperature,pressureandcorrosionfortheaerospaceandnuclearmarkets.
Ourproductioncapabilitiesincludethecompleteelementorcartridgeconstruction,alongwiththebuildofentiretubeplateandvesselassemblies.WeboastspecialistfabricationskillsandtechniquesinallofourmanufacturingsitesaroundtheworldaswellasextensiveISOcleanroomfacilities.
10
Intr
od
uctio
nPr
od
uc
t In
no
vatio
n, M
an
ufa
ctu
ring
, Te
stin
g a
nd
Qu
alit
y
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Product Innovation, Manufacturing, Testing and Quality
Engineering
Frominitialconceptdesignthroughmanufactureand validation to in-service support, our highly experiencedteamofdedicatedengineersworktodeveloptheoptimalfiltrationsolution.Ourteamutilisesthe latest engineering tools of 3D AutoCAD®, Finite ElementStressAnalysis,ComputationalFluidDynamics(CFD)andbespokepressurevesseldesignsoftware(PD5500,ASMEVIII,EN13445).Thisiscombinedwithourknowledgeandstrongethosofworkingcloselywithourcustomers,ensuringfiltrationsolutionsthatmeetcustomersrequirements.
Testing and Laboratory
Ourdedicatedtest,developmentandlaboratoryservicesunderpinourdesignanddevelopmentactivity;fromfiltrationmediaandmaterialcharacterisation,productverificationtestingtocustomersystemssimulationtrialsandinserviceperformanceevaluation.Ourcapabilitiesincludefiltrationcharacterisation,environmentaltestingandanalysis.
Technical Support Services
• Validation services:
- Processspecificvalidation
- Filtercompatibility
- Retention studies
- Microbial challenge tests
- Endotoxin and particulate testing
- Extractables testing
• On-site services:
- Customerplantsurveys
- Processfilteroptimisation
- Trouble-shooting
- Pre-inspection review
• Training:
- Integrity testing
- SIPandCIPmethods
Quality
Our policy is to provide products and services that consistentlysatisfythecommitmentsmadetoourcustomersbycomplyingwiththeirrequirements,workingtogetherasateamandbyachievingcontinualimprovementinourskills,systems,processesandperformance.
Wehaveadedicatedteamofqualityprofessionalswithmanyyearsexperienceindefinition,implementationandmaintenanceofqualitymanagementsystemsmeetingmultipleindustryrequirements.Thisextendsacrosstheworkforcethrough a strong quality culture and a philosophy of ‘gettingitrightfirsttime’drivenfromthetopoftheorganisation.
Ourqualitymanagementsystemsareregularlyauditedinternallyandbycustomersandregulatorybodies.WeholdISO9001atourmanufacturingsitesalongwith,EN9100 and EASA Part 21 Subpart G at facilities in the UK andUSA.WeareNQA1capablesubjecttospecificprojectrequirements.
11
13
Porvair Filtration Group manufacture a range of cleanable metallic filter cartridges and elements, which are used in the following industries:
• Aerospace and Defence
• Nuclear
• Food and Beverage
• Pharmaceutical
• Industrial Process
• ChemicalProcess
• Polymer
The robustness of design, that is provided by a fully weldedmetallicelementorcartridge,isrequiredtoresistdeteriorationinharshoperatingenvironments,includingaggressiveconditions,hightemperaturesorwhere the operating differential pressures are high.
13
Cleanable Filter Elements and Cartridges
Manufactured from randomly laid metal fibres, sinter-bonded to form a uniform high porosity filter medium, Sinterflo® F demonstrates a significantly low pressure drop, high permeability and excellent dirt holding capacity.
Moreover,sinteredmetalfibremaybepleatedtoincreasetheavailablefiltrationareaofafilterelement,thereby further increasing dirt holding capacity, minimisingmaintenanceandmaximisingon-streamprocessing.
Withthefeasibilitytoformulatemetalfibrestomeetspecificapplicationrequirements,combinedwithinherentdurability,sinteredmetalfibrefilterscanbe cleaned in situwithoutinterruptingprocessflow,therebyprovidingtheultimateinprocesseconomicsbyreducingdowntimetoaminimum.
Typical Applications
• Catalyst recovery and retention
• Gasificationandchemicalproduction
• Ventfilters
• Agrochemical
• Steamfiltration
• Culinarysteam
• Processsteam
• Pharmaceuticalpowderrecovery
• Polymermelt
Features and Benefits
• Resistanttohightemperaturesandcorrosiveenvironments.
• Highvoidvolume.
• Excellent cleanability and dirt holding capacity.
• Minimalmaintenancecosts.
• Available in 316L as standard with other alloys such as Inconel® 601, Hastelloy® X, NiCrMo Alloy 59 and Fecralloy® on request.
Sinterflo® FCylindrical Sintered Metal FibreFilterElements
Sint
erfl
o® F
Cyl
ind
rica
l Sin
tere
d M
eta
l Fib
re F
ilte
r Ele
me
nts
CleanableFilterElementsandCartridges
14
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage174.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
15Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
CLEANABLE FILTER ELEMENTS AND CARTRIDGES
Specifications
Materials of Manufacture316L stainless steel standard. Inconel®, Hastelloy®, NiCrMo Alloy 59 and Fecralloy® on request or by process selection. Additional alloys are available on request.
Element Dimensions*Diameter: 66mm(2.6")standard
Length: 05: 125mm(5") 10: 250mm(10") 20: 498mm(20") 30: 745mm(30") 40: 1012mm(40")
* Other diameters and lengths available on request.
Effective Filtration Area0.05m2 (0.55ft2)per250mm(10")element.
Gaskets and O-Rings*EPDMasstandard.Chemraz®, nitrile, PTFE, silicone, Viton®, FEP coated EPDM, FEP coated silicone, FEP coatedViton® available on request or by process selection.* FDA approved seals are available.
Typical Maximum Differential Pressure* (alllengths)Normalflowdirection: 15bar(218psi)
Reverseflowdirection: 3bar(44psi) * Grade dependant.
Operating TemperatureMaximumcontinuous: From-195°C(-319°F)
to340°C(644°F)seallimiting. From-269°C(-452°F)to1000°C(1832°F)alloylimiting.
Sinterflo® F Stainless Steel Media Grades
MicronRating(µm) Liquids(µm)* Gases(µm) (microncode) (99.9%efficiency) (99.9%efficiency)
3(0003) 3 1
5(0005) 5 1.5
10(0010) 10 3
15(0015) 15 4
20(0020) 20 6
30(0030) 30 8
40(0040) 40 11
60(0060) 60 16
* Single Pass Efficiency Test in accordance with ASTM795 ACFTD.
Typical Flow Rates in Air*
Typical Flow Rates in Steam*
Typical Flow Rates in Water*
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)
200
300
Flow Rate (litres/min)
50
100
150
20 60 1000 40 80
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)30
40
50
Flow Rate (ALPM)
10
20
0
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)
15
10
20
30
Flow Rate (ALPM)200 10000 400 800600
25
5
0.0
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.4
0.2
0.6
0.8
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
Flow Rate (US GPM)5 15 250 10 20
Typical Flow Rates in Air
Typical Flow Rates in Steam
Typical Flow Rates in Water
0.0
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
1.0
0.2
1.6
2.0
7µm
5µm
3µm
Flow Rate (US GPM)
0.4
0.6
0.8
1.2
1.4
1.8
5 15 250 10 20
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.10
0.02
0.12
Flow Rate (ACFM)
0.06
0.04
0.08
5 15 350 10 20 25 30
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.03
0.02
0.04
0.06
Flow Rate (ACFM)5 15 350 10 20
0.01
3025
0.05
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.25
0.05
0.30
0.35
Flow Rate (ACFM)
0.15
0.10
0.20
5 15 350 10 20 25 30
7µm
5µm
3µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.14
0.12
0.16
0.20
Flow Rate (ACFM)5 15 350 10 20
0.08
3025
0.18
0.06
0.04
0.02
0.10
7µm
5µm
3µm
60µm
40µm
30µm
20µm
15µm
10µm
5µm
3µm250
60µm
40µm
30µm
20µm
15µm
10µm
5µm
3µm
60µm
40µm
30µm
20µm
15µm
10µm
5µm
3µm
200 1000400 800600
* Using a 10 inch element, at ambient temperature.
Manufactured from randomly laid metal fibres, sinter-bonded to form a uniform high porosity filter medium, Sinterflo® F demonstrates a significantly low pressure drop, high permeability and excellent dirt holding capacity.
Pleatedsinteredmetalfibreincreasestheavailablefiltrationareaofafilterelement,therebyfurtherincreasingdirtholdingcapacityandsominimisingmaintenanceandmaximisingon-streamprocessing.
Withthefeasibilitytoformulatemetalfibrestomeetspecificapplicationrequirementscombinedwithinherentdurability,sinteredmetalfibrefilterscanbecleaned in situwithoutinterruptingprocessflow.Thiswillprovidetheultimateinprocesseconomicsbyreducingdowntimetoaminimum.
Typical Applications
• Catalyst recovery and retention
• Gasificationandchemicalproduction
• Ventfilters
• Agrochemical
• Steamfiltration
• Culinarysteam
• Processsteam
• Pharmaceuticalpowderrecovery
• Polymermelt
Features and Benefits
• Resistanttohightemperaturesandcorrosiveenvironments.
• Highvoidvolume.
• Excellent cleanability and dirt holding capacity.
• Minimalmaintenancecosts.
• Pleatablestructure,offeringhigherfiltrationareaper cartridge.
• Available in 316L as standard with other alloys such as Inconel® 601, Hastelloy® X, NiCrMo Alloy 59 and Fecralloy® on request.
Sinterflo® FPleated Sintered Metal Fibre Filter Cartridges
Sint
erfl
o® F
Ple
ate
d S
inte
red
Me
tal F
ibre
Filt
er C
art
ridg
es
CleanableFilterElementsandCartridges
16
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage174.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
17
Specifications
Materials of Manufacture316L stainless steel standard. Inconel®, Hastelloy®, NiCrMo Alloy 59 and Fecralloy® available on request or by process selection. Additional alloys are available on request.
Cartridge Dimensions* Diameter: 66mm(2.6")standard
Length: 05: 125mm(5") 10: 250mm(10") 20: 498mm(20") 30: 745mm(30") 40: 1012mm(40")
* Other diameters and lengths available on request.
Effective Filtration Area0.13m2 (1.40ft2)per250mm(10")cartridge.
Gaskets and O-Rings*EPDMasstandard.Chemraz®, nitrile, PTFE, silicone, Viton®, FEP coated EPDM, FEP coated silicone, FEP coatedViton® available on request or by process selection.* FDA approved seals are available.
Typical Maximum Differential Pressure* (alllengths)Normalflowdirection: 25bar(363psi)
Reverseflowdirection: 3bar(44psi) * Grade dependant.
Operating TemperatureMaximumcontinuous: From-195°C(-319°F)
to340°C(644°F)seallimiting. From-269°C(-452°F)to1000°C(1832°F)alloylimiting.
Typical Flow Rates in Air*
Typical Flow Rates in Steam*
Typical Flow Rates in Water*
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)
100
20
140
Flow Rate (litres/min)
40
60
80
20 60 1000 40 80
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)15
20
25
Flow Rate (ALPM)
5
10
0
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)
8
6
10
14
Flow Rate (ALPM)200 10000 400 800600
12
4
2
0.0
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.4
0.2
0.6
0.8
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
Flow Rate (US GPM)5 15 250 10 20
Typical Flow Rates in Air
Typical Flow Rates in Steam
Typical Flow Rates in Water
0.0
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
1.0
0.2
1.6
2.0
7µm
5µm
3µm
Flow Rate (US GPM)
0.4
0.6
0.8
1.2
1.4
1.8
5 15 250 10 20
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.10
0.02
0.12
Flow Rate (ACFM)
0.06
0.04
0.08
5 15 350 10 20 25 30
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.03
0.02
0.04
0.06
Flow Rate (ACFM)5 15 350 10 20
0.01
3025
0.05
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.25
0.05
0.30
0.35
Flow Rate (ACFM)
0.15
0.10
0.20
5 15 350 10 20 25 30
7µm
5µm
3µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.14
0.12
0.16
0.20
Flow Rate (ACFM)5 15 350 10 20
0.08
3025
0.18
0.06
0.04
0.02
0.10
7µm
5µm
3µm
60µm
40µm
30µm
20µm
15µm
10µm
5µm
3µm
120
60µm
40µm
30µm
20µm
15µm
10µm
5µm
3µm
60µm
40µm
30µm
20µm
15µm
10µm
5µm
3µm
200 1000400 800600
* Using a 10 inch cartridge, at ambient temperature.
CLEANABLE FILTER ELEMENTS AND CARTRIDGES
Sinterflo® F Stainless Steel Media Grades
MicronRating(µm) Liquids(µm)* Gases(µm) (microncode) (99.9%efficiency) (99.9%efficiency)
3(0003) 3 1
5(0005) 5 1.5
10(0010) 10 3
15(0015) 15 4
20(0020) 20 6
30(0030) 30 8
40(0040) 40 11
60(0060) 60 16
* Single Pass Efficiency Test in accordance with ASTM795 ACFTD.
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Primarily produced from 316L grade powder, however other stainless steel grades and powder alloys such as Inconel®, Hastelloy® and Monel® are available, depending upon the requirements of the operating conditions.
Thesematerialsofferresistancetomostchemicalsandcanbeusedintemperaturesupto1000ºC (1832°F).
Ourisostaticpressingensuresgreatermediauniformitywith no welds, leading to increased corrosion resistance.
Typical Applications
• Catalyst recovery and retention
• Polymermelt
• Chemicalproduction
• Steamfiltration
• Culinarysteam
• Processsteam
• Liquidsandliquidbackwash
Features and Benefits
• Extremelyrobustconstruction.
• Smoothsurfacefinishpreferableforbackwashapplications.
• Selfsupportingconstructioneliminatingtheneedfor additional hardware.
• Isostatic pressed, robust construction.
• Broadrangeoffixed,uniformporesizes.
• Ability to withstand varying process conditions.
• Available in 316L stainless steel as standard with other alloys such as 304L stainless steel, 904L stainless steel, 310 stainless steel, Inconel®, Hastelloy® and Monel® on request, as well as sinteredpowderedbronze.
Sinterflo® PCylindrical Sintered Metal PowderFilterElements
Sint
erfl
o® P
Cyl
ind
rica
l Sin
tere
d M
eta
l Po
wd
er F
ilte
r Ele
me
nts
CleanableFilterElementsandCartridges
18
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage175.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
19
Specifications
Materials of Manufacture316L stainless steel standard. 304L stainless steel, Inconel®, Hastelloy®, Monel® on request or by process selection. Additional alloys are available on request.
Element Dimensions*Diameter: 66mm(2.6")standard
Length: 05: 125mm(5") 10: 250mm(10") 20: 498mm(20") 30: 745mm(30") 40: 1012mm(40")
* Other diameters and lengths available on request.
Effective Filtration Area0.05m2 (0.55ft2)per250mm(10")element.
Gaskets and O-Rings*EPDMasstandard.Chemraz®, nitrile, PTFE, silicone, Viton®, FEP coated EPDM, FEP coated silicone, FEP coatedViton® available on request or by process selection.* FDA approved seals are available.
Typical Maximum Differential Pressure* (alllengths)
Normalflowdirection: 25bar(363psi)
Reverseflowdirection: 10bar(145psi) * Grade dependant.
Operating TemperatureMaximumcontinuous: From-195°C(-319°F)
to340°C(644°F)seallimiting. From-269°C(-452°F)to1000°C(1832°F)alloylimiting.
Typical Flow Rates in Air*
Typical Flow Rates in Steam*
Typical Flow Rates in Water*
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)
1200
1400
Flow Rate (litres/min)
600
800
1000
20 60 1000 40 80
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)150
200
250
Flow Rate (ALPM)
50
100
0
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)
60
40
120
160
Flow Rate (ALPM)200 10000 400 800600
140
20
0.0
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.4
0.2
0.6
0.8
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
Flow Rate (US GPM)5 15 250 10 20
Typical Flow Rates in Air
Typical Flow Rates in Steam
Typical Flow Rates in Water
0.0
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
1.0
0.2
1.6
2.0
7µm
5µm
3µm
Flow Rate (US GPM)
0.4
0.6
0.8
1.2
1.4
1.8
5 15 250 10 20
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.10
0.02
0.12
Flow Rate (ACFM)
0.06
0.04
0.08
5 15 350 10 20 25 30
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.03
0.02
0.04
0.06
Flow Rate (ACFM)5 15 350 10 20
0.01
3025
0.05
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.25
0.05
0.30
0.35
Flow Rate (ACFM)
0.15
0.10
0.20
5 15 350 10 20 25 30
7µm
5µm
3µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.14
0.12
0.16
0.20
Flow Rate (ACFM)5 15 350 10 20
0.08
3025
0.18
0.06
0.04
0.02
0.10
7µm
5µm
3µm
60µm
40µm
30µm
25µm
15µm
10µm
6µm
60µm
40µm
30µm
25µm
15µm
10µm
6µm
60µm
40µm
30µm
25µm
15µm
10µm
6µm
200 1000400 800600
400
200
100
80
Sinterflo® P Stainless Steel Media Grades
StainlessSteel MicronRating(µm) Liquids(µm)* Gases(µm) Grades (microncode) (99.9%efficiency) (99.99%efficiency)
* Single Pass Efficiency Test in accordance with ASTM795 ACFTD.
S10 6(0006) 6 0.7S20 10(0010) 10 0.8S30 15(0015) 15 4S36 25(0025) 25 5S40 30(0030) 30 6S41 40(0040) 40 8S50 60(0060) 60 15
* Using a 10 inch element, at ambient temperature.
CLEANABLE FILTER ELEMENTS AND CARTRIDGES
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Sinterflo® M demonstrates good permeability, high tensile strength and is available from single wrap designs through to complex multi-layered structures in pleated constructions to optimise the area available. These meshes can be manufactured in diffusion bonded versions to increase performance security of pore shape and size and have the broadest range of pore sizes of any filter media type.
Sinterflo®Mprecisionwovenmeshesaremanufacturedin various types of weaves. Plain square weave is availableforsimplesievingdutiesthroughvariousweave patterns (Reverse Plain Dutch, Broad Mesh Twill andSinglePlainWeave).DutchTwillWeaveisprovidedforthemostcomprehensiveselectionofsurfacefiltrationduties.
Typical Applications
• Catalyst recovery and retention
• Gasificationandchemicalproduction
• Ventfilters
• Agrochemical
• Steamfiltration
• Culinarysteam
• Processsteam
• Pharmaceuticalpowderrecovery
• Polymermelt
Features and Benefits
• Manufactured in various types of weaves.
• Preciseapertureinsizeandshape.
• Goodpermeability.
• All welded, robust construction.
• Availablefromsinglelayereddesignstocomplexmulti-layeredstructures.
• Availableinthebroadestrangeofporesizesofanyfiltermediatype.
• Smoothsurfacevariantpreferableforbackwashapplications.
• Available in 316L stainless steel as standard with other alloys such as 304L stainless steel, Inconel®, Hastelloy® and Monel® on request.
Sinterflo® MCylindrical Metal Mesh FilterElements
Sint
erfl
o® M
Cyl
ind
rica
l Me
tal M
esh
Filt
er E
lem
ent
s CleanableFilterElementsandCartridges
20
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage176.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
21
Specifications
Materials of Manufacture316L stainless steel standard. 304L stainless steel, Inconel®, Hastelloy® and Monel® available on request or by process selection.
Element Dimensions*Diameter: 66mm(2.6")standard
Length: 05: 125mm(5") 10: 250mm(10") 20: 498mm(20") 30: 745mm(30") 40: 1012mm(40")
* Other diameters and lengths available on request.
Effective Filtration Area0.05m2 (0.55ft2)per250mm(10")element.
Gaskets and O-Rings*EPDMasstandard.Chemraz®, nitrile, PTFE, silicone, Viton®, FEP coated EPDM, FEP coated silicone, FEP coatedViton® available on request or by process selection.* FDA approved seals are available.
Typical Maximum Differential Pressure* (alllengths)Normalflowdirection: 15bar(218psi)
Reverseflowdirection: 3bar(44psi) * Grade dependant.
Operating TemperatureMaximumcontinuous: From-195°C(-319°F)
to340°C(644°F)seallimiting. From-269°C(-452°F)to1000°C(1832°F)alloylimiting.
Typical Flow Rates in Air*
Typical Flow Rates in Steam*
Typical Flow Rates in Water*
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)
70
10
90
Flow Rate (litres/min)
20
30
40
20 60 1000 40 80
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)
6
8
12
Flow Rate (ALPM)
2
4
0
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)
3
5
7
Flow Rate (ALPM)200 10000 400 800600
2
1
0.0
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.4
0.2
0.6
0.8
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
Flow Rate (US GPM)5 15 250 10 20
Typical Flow Rates in Air
Typical Flow Rates in Steam
Typical Flow Rates in Water
0.0
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
1.0
0.2
1.6
2.0
7µm
5µm
3µm
Flow Rate (US GPM)
0.4
0.6
0.8
1.2
1.4
1.8
5 15 250 10 20
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.10
0.02
0.12
Flow Rate (ACFM)
0.06
0.04
0.08
5 15 350 10 20 25 30
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.03
0.02
0.04
0.06
Flow Rate (ACFM)5 15 350 10 20
0.01
3025
0.05
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.25
0.05
0.30
0.35
Flow Rate (ACFM)
0.15
0.10
0.20
5 15 350 10 20 25 30
7µm
5µm
3µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.14
0.12
0.16
0.20
Flow Rate (ACFM)5 15 350 10 20
0.08
3025
0.18
0.06
0.04
0.02
0.10
7µm
5µm
3µm
50µm
35µm
30µm
25µm
15µm
10µm
5µm
3µm
80
50µm
35µm
30µm
25µm
15µm
10µm
5µm
3µm
50µm
35µm
30µm
25µm
15µm
10µm
5µm
3µm
200 1000400 800600
60
50
10
6
4
Sinterflo® M Stainless Steel Media Grades
MicronRating(µm) Liquids(µm)* Gases(µm) (microncode) (99.9%efficiency) (99.9%efficiency)
3(0003) 10 2
5(0005) 18 13
10(0010) 25 18
15(0015) 35 25
20(0020) 30 20
30(0030) 40 30
35(0035) 50 45
70(0070) 75 60
* Hard spherical particle maximum passed.
* Using a 10 inch element, at ambient temperature.
CLEANABLE FILTER ELEMENTS AND CARTRIDGES
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Sinterflo® M demonstrates good permeability, high tensile strength and is available from single wrap designs through to complex multi-layered structures in pleated constructions to optimise the area available. These meshes can be manufactured in diffusion bonded versions to increase performance security of pore shape and size and have the broadest range of pore sizes of any filter media type.
Sinterflo®Mprecisionwovenmeshesaremanufacturedin various types of weaves. Plain square weave is availableforsimplesievingdutiesthroughvariousweave patterns (Reverse Plain Dutch, Broad Mesh Twill andSinglePlainWeave).DutchTwillWeaveisprovidedforthemostcomprehensiveselectionofsurfacefiltrationduties.
Sinterflo® M is available in 316L stainless steel as standard with other alloys such as 304L stainless steel, Inconel® and Monel® on request.
Typical Applications
• Catalyst recovery and retention
• Gasificationandchemicalproduction
• Ventfilters
• Agrochemical
• Steamfiltration
• Culinarysteam
• Processsteam
• Pharmaceuticalpowderrecovery
• Polymermelt
Features and Benefits
• Manufactured in various types of weaves.
• Preciseapertureinsizeandshape.
• Goodpermeability.
• All welded, robust construction.
• Availablefromsinglelayereddesignstocomplexmulti-layeredstructuresinpleatedconstructionstooptimisetheareaavailable.
• Availableinthebroadestrangeofporesizesofanyfiltermediatype.
• Smoothsurfacevariantpreferableforbackwashapplications.
• Available in 316L stainless steel as standard with other alloys such as 304L stainless steel, Inconel®, Hastelloy® and Monel® on request.
Sinterflo® MPleated Metal Mesh Filter Cartridges
Sint
erfl
o® M
Ple
ate
d M
eta
l Me
sh F
ilte
r Ca
rtrid
ge
s CleanableFilterElementsandCartridges
22
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage176.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
23
Specifications
Materials of Manufacture316L stainless steel standard. 304L stainless steel, Inconel®, Hastelloy® and Monel® on request or by process selection. Additional alloys are available on request
Cartridge Dimensions*Diameter: 66mm(2.6")standard
Length: 05: 125mm(5") 10: 250mm(10") 20: 498mm(20") 30: 745mm(30") 40: 1012mm(40")
* Other diameters and lengths available on request.
Effective Filtration Area0.13m2 (1.40ft2)per250mm(10")cartridge.
Gaskets and O-Rings*EPDMasstandard.Chemraz®, nitrile, PTFE, silicone, Viton®, FEP coated EPDM, FEP coated silicone, FEP coatedViton® available on request or by process selection.* FDA approved seals are available.
Typical Maximum Differential Pressure* (alllengths)Normalflowdirection: Upto25bar(363psi)
Reverseflowdirection: 3bar(44psi) * Grade dependant.
Operating TemperatureMaximumcontinuous: From-195°C(-319°F)
to340°C(644°F)seallimiting. From-269°C(-452°F)to1000°C(1832°F)alloylimiting.
Typical Flow Rates in Air*
Typical Flow Rates in Steam*
Typical Flow Rates in Water*
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)
50
10
70
Flow Rate (litres/min)
20
30
40
20 60 1000 40 80
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)6
8
10
Flow Rate (ALPM)
2
4
0
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)
3
4
5
Flow Rate (ALPM)200 10000 400 800600
2
1
0.0
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.4
0.2
0.6
0.8
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
Flow Rate (US GPM)5 15 250 10 20
Typical Flow Rates in Air
Typical Flow Rates in Steam
Typical Flow Rates in Water
0.0
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
1.0
0.2
1.6
2.0
7µm
5µm
3µm
Flow Rate (US GPM)
0.4
0.6
0.8
1.2
1.4
1.8
5 15 250 10 20
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.10
0.02
0.12
Flow Rate (ACFM)
0.06
0.04
0.08
5 15 350 10 20 25 30
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.03
0.02
0.04
0.06
Flow Rate (ACFM)5 15 350 10 20
0.01
3025
0.05
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.25
0.05
0.30
0.35
Flow Rate (ACFM)
0.15
0.10
0.20
5 15 350 10 20 25 30
7µm
5µm
3µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.14
0.12
0.16
0.20
Flow Rate (ACFM)5 15 350 10 20
0.08
3025
0.18
0.06
0.04
0.02
0.10
7µm
5µm
3µm
50µm
35µm
30µm
25µm
15µm
10µm
5µm
3µm
60
50µm
35µm
30µm
25µm
15µm
10µm
5µm
3µm
50µm
35µm
30µm
25µm
15µm
10µm
5µm
3µm
200 1000400 800600
Sinterflo® M Stainless Steel Media Grades
MicronRating(µm) Liquids(µm)* Gases(µm) (microncode) (99.9%efficiency) (99.9%efficiency)
3(0003) 10 2
5(0005) 18 13
10(0010) 25 18
15(0015) 35 25
20(0020) 30 20
30(0030) 40 30
35(0035) 50 45
70(0070) 75 60
* Hard spherical particle maximum passed.
* Using a 10 inch cartridge, at ambient temperature.
CLEANABLE FILTER ELEMENTS AND CARTRIDGES
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Sinterflo® MC multi-layered, diffusion-bonded stainless steel mesh is produced using a novel sintering process; it is available in both Lo Flow and Hi Flow rates, to meet your application requirements.
Thismaterialiseasilycustomengineeredtomeettherequiredspecificationofmaterials,strength,flowrequirements,thickness,micronratingandenvironment.
Dependingonatmosphericconditions,itcanbeusedintemperaturesupto540ºC(1004ºF),withintermittentoperatingpeaksupto650ºC(1202ºF).
Primarilymadefrom316Lstainlesssteel,itisalsoavailable in Inconel®, Hastelloy® and Monel®materialsforuseinthemostaggressiveenvironments.
Typical Applications
• Liquid applications
• Steamfiltration
• Culinarysteam
• Processsteam
Features and Benefits
• Asuperior,mechanicallystrongstructure.
• Fabricated shapes without expensive support structuresorjoiningstrips.
• Can be reused as the structure allows repeated cleaning,providinganeconomicalchoice.
• Non-sheddingmediathatprovidesresistancetomechanicalabrasion.
• Resistancetomostchemicals.
Sinterflo® MCMetalCompositeFilterCartridges
Sint
erfl
o® M
C M
eta
l Co
mp
osi
te F
ilte
r Ca
rtrid
ge
s CleanableFilterElementsandCartridges
24
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
25
Specifications
Materials of Manufacture316L stainless steel standard. 304L stainless steel, Inconel® 600, Hastelloy® X and Monel® available on request or by process selection.
Cartridge Dimensions*Diameter*: 66mm(2.6")standard
Length*: 05: 125mm(5") 10: 250mm(10") 20: 498mm(20") 30: 745mm(30") 40: 1012mm(40")
* Other diameters and lengths available on request.
Effective Filtration Area0.05m2 (0.55ft2)per250mm(10")cartridge.
Gaskets and O-RingsEPDMasstandard.Chemraz®, nitrile, PTFE, silicone, Viton®, FEP coated EPDM, FEP coated silicone, FEP coatedViton® available on request or by process selection.
Stainless Steel Media Grades
Liquids(µm) Gases(µm)
* Single Pass Efficiency Test in accordance with ASTM795 ACFTD.
5 3.5
8 6
10 8
15 13
20 16
30 20
35 22
70 55
CLEANABLE FILTER ELEMENTS AND CARTRIDGES
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Porvair Filtration Group’s candle filters are available in both cylindrical and pleated formats, in industry standard designs, or can be custom designed to fit any particular housing. These are available in both sintered metal fibre and woven wire mesh.
Availableinfiltrationratingsfrom3to100microns,ourcandlefiltersarenormallysuppliedwithanouterguard,bothtoprotectthemediaandtoallowreverseflowduringcleaning.Ourcandlesarereadilycleanable with current technology.
Allcandlesareprovidedwithinternalvolumereducestoavoidstagnantflowregionswithinthecandledesign.Flowdiverterfeatureswithinthevolumereducer provide good distribution over the candles as thepolymerentersthehousing.
Usingourrangeofhighstrength,highlypermeablestainlesssteelfibremedia,resultsincandlefilterswithlowinitialpressuredropsandlongon-streamlife.
Typical Applications
• Polyester bottle chip
• Polyesterfibre
• Celluloseacetatefibre
• Nylon6and66fibre
Features and Benefits
• Proven robustness for cleaning and repeat use. • Longfilterlife.
• Operateinhightemperatureenvironments.
• High carbon resistance.
• Highfiltrationareaforpleatedcandleversion.
Candle FiltersforthePolymerMeltIndustry
Ca
ndle
Filt
ers
for t
he P
oly
me
r Me
lt In
dus
try
CleanableFilterElementsandCartridges
26
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
27
Porvair Filtration Group’s RempakTM candle filters are manufactured with removable hardware fittings, and replaceable media, resulting in lower operating costs.
These are available in both cylindrical and pleated formats,inindustrystandarddesigns,orcanbecustomdesignedtofitanyparticularhousing.Theseareavailableinbothsinteredmetalfibreandwovenwiremesh.
Allcandlesareprovidedwithinternalvolumereducerstoavoidstagnantflowregionswithinthecandledesign.Flowdiverterfeatureswithinthevolumereducer provide good distribution over the candles as thepolymerentersthehousing.
Typical Applications
• Polyester bottle chip
• Polyesterfibre
• Celluloseacetatefibre
• Nylon6and66fibre
Features and Benefits
• Proven robustness for cleaning and repeat use. • Longfilterlife.
• Operateinhightemperatureenvironments.
• High carbon resistance.
RempakTM Candle FiltersforthePolymerMeltIndustry
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
CLEANABLE FILTER ELEMENTS AND CARTRIDGES
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Porvair Filtration Group manufacture a range of pleated filter elements for the aerospace and defence industries. These are used for critical contamination control in a variety of aircraft systems.
Thefiltermediaforpleatedelementscanbepolymeric,glassfibreorsinteredmetalfibreusedincombinationwithavarietyofsupportanddrainmeshestooptimisecostandperformance.Typicalabsolutefiltrationratingsare5,10,15and25micronwith a Beta ratio greater than 200.
Sinterflo® M Sintered Metal MeshOurSinterflo®Mmetalmeshpleatedfiltersdemonstrategoodpermeability,hightensilestrengthandareavailableincomplexmulti-layeredstructures.
Thesefiltersarecleanableunderspecificconditions,whichcanbedefinedbyamemberofPorvair FIltration Group’sSalesTeam.
Porvair Filtration Group also supply a range of sinteredmetalfibre,glassfibre,polymericorresin-impregnatedcellulosepleatedelements,formoreinformationpleaserefertopage37.
Typical Applications
• Hydraulic
• Lubricant
• Coolant
• Fuel
• Air
• Environmentalcontrol
Features and Benefits
• Highfiltrationefficiency. • Lightweight.
• Enhanced operating life.
Filter Assemblies
Porvairmanufacturesfilterassembliesforhydraulic,fuel,lubricationandairsystems.Applicationsinclude:
• Hydraulic pressure, return and case drain.
• Thrustreverseractuationsystems.
• FuelsupplyforbothmainengineandAPU’s.
• Fuelinertingsystems.
• Gearbox lubrication.
28
CONTENTS INDEXORDERING INFORMATION
Pleated Filter ElementsFor the Aerospace Industry
PRODUCTSINTRODUCTION
Ple
ate
d F
ilte
r Ele
me
nts
for t
he A
ero
spa
ce
Ind
ustr
yCleanableFilterElementsandCartridges
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Segensworth Division US, Ashland Division Tel:+44(0)1489864330 Tel:+18045501600 Email:[email protected] Email:[email protected]
29
CLEANABLE FILTER ELEMENTS AND CARTRIDGES
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
31
Leaf disc and solid plate filters are designed for critical hot melt polymer filtration applications such as the manufacture of PET packaging film, PEEK chip and film.
Thesefiltersaredesignedtoachievegreatergelcontrolbyprovidingsmootherflowandthereforegreatergelretentiononthefilter.
Inadditiontoofferingawiderangeoffiltermedia,Porvair’s leafdiscfiltersofferthelatestdesignfeatures,ensuring lower pressure drops leading to longer on streamlife.Therobustconstructionallowsformanycleaning cycles, reducing whole life costs.
With our wide experience and our broad range of filtermedia,ourapplicationanddesignengineerscancustomdesignoptimumfiltrationproductsforeachproductandprocess;thisincludessupportduring the design process in order to achieve on-line performance.
Our technical laboratory services include facilities wherewecancharacteriseourmediaandelements’performancebytheuseofflowtests,porosimetry,microscopy,chemicalanalysis,tensiletesting,metallographyandthequantificationofpolymercontaminantwithimageanalysis.
31
Leaf Disc and Solid Plate Filters
Porvair Filtration Group manufacture a range of stainless steel fibre and powder leaf disc filters for use within the polymer melt industry.
Stackeddisccapsulesarepreferredwhenlowresidencetimeanduniformflowareimportant,andwhere degradation is a concern. Capsules also produceasingulardownstreamflowpathwhicheliminatestheneedformixerstopreventflowlinesinfinishedfilm.
Capsulesareavailablewithdiametersof178mm(7"),254mm(10")and305mm(12"),allindustrystandardhubdesignsanddimensions,withoptionallooseorweldedspiders.Awiderangeofefficienciesareavailableincluding3to40micronsinsinteredsteelfibremediaand10to40micronsinsinteredsteelpowdermediausingstainlessorspecialitysteels.
Thestainlesssteelfibremediafiltershavethefollowingfeaturesandbenefits:
• Photo etched plate support Thenon-perforatededgeimprovesweldingstrength at the edge of the disc, increasing the strengthandrigidityofthefilter.
• Mesh separator Precision316LalloystainlesssteelmeshIncreasestheoverallstrengthandrigidityofthefilter.
• Advanced hard hub Maximumstrengthand35%moreopenarea,reducingpressuredropwithoutcompromisingdisc strength.
Typical Applications
• Polyesterfilm
• PEEKmaterial
Features and Benefits
• Optimumstrengthandperformance.
• Readily cleanable.
• Longon-streamlife.
• Constantporesizedistributionduringmanufacture.
Specifications
Materials of Manufacture304L/316Lstainlesssteelstandard.
Method of ConstructionFusion welded.
Method of SealingMetalfibregasket.
Dimensions305mm(12")x63.5mm(2.5") 305mm(12")x85.1mm(3.35") 178mm(7")x47.75mm(1.88")
Minimum Differential Pressure300bar(4351psi)at350°C(662°F)
Operating TemperatureMaximumcontinuous:upto400°C(752°F)
Disc Stack Sealing Load8tonnemaximum.
Leaf Disc FiltersForthePolymerMeltIndustry
Lea
f Dis
c F
ilte
rs fo
r the
Po
lym
er M
elt
Ind
ustr
y Le
af D
isc a
nd
So
lid P
late
Filt
ers
32
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
33
Porvair Filtration Group manufacture solid plate leaf disc filters for use within the polymer melt industry.
Oursolidplatecapsulefilterisdesignedforhighperformancefilmandfibreproduction,witharuggedconstruction offering increased strength and durability andminimalresidencetime.
Thesolidplategreatlyimprovestheappearanceandperformanceofthinfilmproductsandlimitsthecreationofgelsanddegradedpolymerathightemperatures.
WithPrologtracking,eachfilterisuniquelyidentifiedandcertifiedbyweightandbubblepointatmanufacturetoallowforpreciseverificationofthecleaning process.
Typical Applications
• Polycarbonatefilms
Features and Benefits
• Easy to clean.
• Inherent strength.
• Low interference drainage channels.
• Nofiltersupportmaterialrequired.
• Can be re-clothed.
• Lowresidencetime.
Solid Plate Leaf Disc FiltersForthePolymerMeltIndustry
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
LEAF DISC AND SOLID PLATE FILTERS
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
35
Porvair Filtration Group manufacture a range of disposable polymeric filters for use within the following industries:
BiopharmaceuticalOurdisposablepolymericcartridgefiltersareconstructedfromFDAapprovedmaterialscarryingtheCFR21numberforbiologicalsafetyandourmaterialsofconstructionmeetUSPClassVI-121°Cplastics.Designedandmanufacturedforrobustness,oursterilisinggradepolymericmembranefiltersarefullyvalidatedprovidingretentionof>107colonyformingunitspersquarecentimetreofeffectivefiltrationareaas stipulated by PDA Technical Reports 26 and 40.
Food and BeverageOurrangeoffiltersareinstalledtoeffectivelyremoveparticulates,yeast,mouldsporesandbacteriaforuseinwineries,breweries,cider,mineralwater,softdrinks,foodanddairyproducts,culinarysteam,powderhandling and sparging applications.
Industrial and Chemical ProcessOurfilterrangecanbeusedinprocessapplicationssuchasspecialistinks,UVcurableinks,laminates,coatingsandlacquers,electronicsgradechemicals,watertreatment,carbonfibreprecursor,paint,partswashing,powderhandlingandtransmission,cosmeticsand toiletries.
PrintingInprinta’sextendedrangeoffiltersofferssolutionsforinkjetrequirementsincludingcapsule,in-line,lastchance,andbulkinkfiltration.
35
Disposable Filter Elements and Cartridges
36
CONTENTS INDEXORDERING INFORMATIONPRODUCTSINTRODUCTION
Ple
ate
d F
ilte
r Ele
me
nts
for t
he A
ero
spa
ce
Ind
ustr
yDisp
osableFilterElementsandCartridges
Contact Information: UK, Segensworth Division US, Ashland Division Tel:+44(0)1489864330 Tel:+18045501600 Email:[email protected] Email:[email protected]
Porvair Filtration Group manufacture a range of pleated filter elements for the aerospace and defence industries. These are used for critical contamination control in a variety of aircraft systems.
Thefiltermediafordisposablepleatedelementscanbepolymeric,glassfibreorsinteredmetalfibreusedincombinationwithavarietyofsupportanddrainmeshestooptimisecostandperformance.Typicalabsolutefiltrationratingsare5,10,15and25micronwith a Beta ratio greater than 200.
Polymeric or Resin-Impregnated Cellulose Moderate dirt-holding capacity and lightweight. Offer a cost-effective solution for low pressure and temperaturefuelfiltration.
Glass FibreReduced pressure drop, increased dirt-holding capacity and can withstand greater pressures and temperaturesthancellulosefilters.
Sinterflo® F Sintered Metal FibreOurSinterflo®Fsinteredmetalfibrefiltersofferunparalleledperformanceandcanwithstandextremesoftemperatureandpressure.Studiesindicateasuperiorresistancetothedownstreamdepositofcontaminationandmaintainingintegrityduringdynamicflowconditions.
Porvair Filtration Group also supply a range of sintered metalmeshpleatedelements,formoreinformationplease refer to page 28.
Typical Applications
• Hydraulic
• Lubricant
• Coolant
• Fuel
• Air
• Environmentalcontrol
Features and Benefits
• Highfiltrationefficiency. • Lightweight.
• Enhanced operating life.
Filter Assemblies
Porvairmanufacturesfilterassembliesforhydraulic,fuel,lubricationandairsystems.Applicationsinclude:
• Hydraulic pressure, return and case drain.
• Thrustreverseractuationsystems.
• FuelsupplyforbothmainengineandAPU’s.
• Fuelinertingsystems.
• Gearbox lubrication.
37
Pleated Filter Elements For the Aerospace Industry
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Activated Carbon, a porous substance with strong physical adsorbtion properties, has the highest volume of adsorbing porosity of any material known.
By carbonisation and activation, activated carbon canbemadefrommanysubstancescontaininghighcarboncontentsuchascoal,wood,bambooandcoconut shells.
Activatedcarbonfiltersarewidelyappliedinindustrialprocessandciviluseasthemostefficientmethodofremovingodours,chlorine,volatileorganiccompounds(VOC),colours,tastesandothercontaminantsfromfluids.
ThePorvairCarbofil™ series is the new generation of carbon cartridges produced by the extrusion process. They provide long service life and superior adsorptionperformancecomparedtoconventionalgranular activated carbon cartridges together with minimumfines.Withahighmechanicalstrengthandlowashcontent,thecarbonblockstructurepreventschannelling,bypassing,fluidizingorunloadingofcarbonfines.
Topreventprematureblockingoftheactivatedcarbonlayer,theCarbofil™filtersincorporateaneffectivepre-filtrationlayerdesignedtointerceptgelsand large particles.
TheCarbofil™seriesactivatedcarbonfiltercartridgesusepremiumgradecoconutshellextrudedcarbonblocksandcanbesuppliedinanylengthandendcapconfiguration,tomeettherequirementsoftheprocessapplication.
Typical Applications
• PCB solutions
• Plating and coating solutions
• Industrialwatertreatment
• Drinkingwatertreatment
• ChlorineandVOCremoval
• Tastes,odoursandorganicpigments
• Chlorinatedcompoundsreduction
• Oilsandaromaticcompoundsremoval
Features and Benefits
• Safe handling without any loose powder.
• Sanitaryinstallationandremoval.
• Fitsintoavarietyofstandardfilterhousings.
• Rapid and high capacity adsorption of contaminants.
CarbofilTMActive Carbon Filter Cartridges
Ca
rbo
filTM
Ac
tive
Ca
rbo
n Fi
lter C
art
ridg
es
Disp
osableFilterElementsandCartridges
38
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage180.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
39
Specifications
Materials of ManufactureFiltermedia: PACimpregnatedcellulose
Netting: Polyethylene
Reinforcementbacking: Cellulosepolyester
Core: Polypropylene
Outersupport: Polypropylene
Endcaps: Polypropylene
Cartridge Dimensions (Nominal)Outsidediameter: 70mm(2.8”)
Insidediameter: 27mm(1.1")
Length: 254mm(10”) 508mm(20”) 762mm(30”) 1016mm(40”)
Gaskets and O-RingsEthylene Propylene.
Operating TemperatureFrom40ºF(4ºC)to125ºF(52ºC)
Cartridge Performance
Additional InformationTheCarbofil™cartridgewillcontainaverysmallamountofcarbonfines(veryfineblackpowder)andanewcartridgeafterinstallationshouldbeflushedwithsufficientwatertoremovetracesofthefinesfromyourwatersystembeforeusingthewater.Itisrecommendedthatyourun(flush)foratleast20seconds prior to using water.
Estimatedcapacitytestedatgivenflowrateusing2ppmfreeavailablechlorineatcontinuousflowtowithgreaterthan90%reduction.Increasedflowratesmayresult in less effective chlorine reduction.
Micronratingsarebasedon85%removalofgivenparticlesize.
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
WARNING
Fordrinkingwaterapplications,donotusewithwaterthatismicrobiologicallyunsafeorofunknownquality without adequate disinfection before or afterthesystem.
Filter Code Cartridge Length Micron Rating Initial ∆p (psi) Chlorine Reduction (mm) (µm) @flowratelpm @flowratelpm
CR05-N1 250mm(10") 5 1.4psi@4lpm >23,000litres@4lpm
CR05-N2 508mm(20") 5 1.5psi@8lpm >46,000litres@8lpm
CR05-N3 762mm(30") 5 1.5psi@15lpm >69,000litres@15lpm
CR05-N4 1016mm(40") 5 1.5psi@20lpm >92,000litres@20lpm
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Cryptofil™ filter cartridges are utilised for the control of Cryptosporidium oocysts in water used in the food, beverage and ultrapure water industries.
TheCryptofil™ cartridge has been developed after extensiveresearchandhasresultedinfiltermediawithcontinuouslygradedfibredensity.Thisyieldsprogressivelyfineroocystretentionthroughthedepthofthemedia.
Thisgradeddensitydepthfiltrationmechanism,combinedwithoptimisedpleatedpackconfigurationandresultanthighsurfacearea,affordshighflowcapability and exceptional oocyst retention capacity.
Cryptosporidiumoocystsremovedfromthewaterflowarecapturedwithinthemediaandarenotsubjecttoreleasebysystemfluctuations.ThevoidsvolumeofCryptofil™combinedwithadvancedcartridgeconstructionresultsinafiltercapableofretaininghighconcentrations of oocysts ensuring extended service lifeandreducedfiltrationcosts.
Typical Applications
• Mineral water
• Food processing
• Embarkationwatersupply
• Leisure
Features and Benefits
• Gradedmulti-layermedia.
• Guaranteedremovalratings.
• Highfiltrationarea.
• Cartridge integrity and low TOC levels.
• Suitableforsteamandhotwatersanitisation.
• Environmentallyfriendly.
• Full traceability.
• Controlledmanufacturingenvironment.
Cryptofil™FortheRemovalofCryptosporidiumOocysts
Cry
pto
filTM
Pre
-Filt
er C
art
ridg
es
Disp
osableFilterElementsandCartridges
40
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage180.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
41
Specifications
Materials of ManufactureFiltermedia: Polypropylene
Supportlayers: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8”)
Length: 1module: 254mm(10”) 508mm(20”) 2modules: 762mm(30”)
1016mm(40”)
Effective Filtration AreaUpto0.6m2per250mmmodule.
Cartridge TreatmentStandard: Cleanedwithoutfurthertreatment.
Flushed: Flushedwithpyrogenfreewater.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Gaskets and O-RingsEthylenePropylene,FEPencapsulated,Silicone,Viton®, Nitrile or Polypropylene felt.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi) 125°C(257°F): 1.5bar(22psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 80°C(176°F)
SterilisationIn situsteam60x30minutecyclesat130°C(266°F). Hotwater200x20minutecyclesat80°C(176°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe Cryptofil™ValidationGuide.
Integrity TestingEachCryptofil™moduleofeverycartridgeisindividually integrity tested using the Bubble Point Test. ProceduraldetailsareavailablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)CryptofilTM single cartridge exhibits theflow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
250
50
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Water Flow Rate (l/min)
0 10
100
150
200
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
A range of absolute rated cartridge filters from Porvair Filtration Group, featuring the latest developments in meltblown polypropylene filter media technology, KlearfilTM cartridges are based on a robust all polypropylene construction, offering removal ratings from 0.5 to 75 micron absolute.
Thecombinationofuptoeightseparatefiltrationlayersprovidestruedepthfiltration,withinapleatedcartridge construction. This design will reduce fouling of thefiltersurfaceareacausedbyabroadspectrumofcontaminants.
KlearfilTMcartridgesareideallysuitedforthefiltrationofprocessfluids,thatcontaincontaminantswithawiderangeofparticlesizes.
Thegradedmulti-layerpolypropylenemediaprovidespre-filtrationoftheprocessfluidpriortotheabsoluteratedfinallayer.TheuniquedesignoftheKlearfilTM cartridges helps to achieve lower running costs and a smallerprocessfootprint.
TheKlearfilTM are also highly resistant to integrity failure causedbysteamsterilisationandhaveexcellentchemicalcompatibilitycharacteristics.
Theyaresuitableforapplicationsrangingfrombioburdenreductionandtheclarificationofawiderange of process liquids and end products.
Typical Applications
• Pharmaceuticalsandbioprocessing
• Foods and beverages
• Processwatersystems
• Finechemicals
•Cosmetics
KlearfilTMcartridgescanalsobeusedaspre-filtersorfinalfiltersinbulkinkjetfiltration;suitableformanufacturewithallmajorinktypes:
• Aqueous
• UV
• Solvent
• Dye
• Pigment
Features and Benefits
• Gradedmulti-layermedia.
• Guaranteedremovalratings.
• Suitableforsteamandhotwatersanitisation.
• Environmentallyfriendly.
• Full traceability.
• Controlledmanufacturingenvironment.
KlearfilTM Absolute Rated Pleated Depth Filters
Kle
arfi
lTM P
re-F
ilte
r Ca
rtrid
ge
s Disp
osableFilterElementsandCartridges
42
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage180.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
43
Specifications
Materials of ManufactureFiltermedia: Polypropylene
Supportlayers: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8”)
Length: 1module(short): 125mm(5”) 1module: 254mm(10”), 508mm(20”) 2modules: 762mm(30”), 1016mm(40”)
Cartridge TreatmentStandard: Cleanedwithoutfurthertreatment.
Flushed: Flushedwithpyrogen-freewater.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Gaskets and O-RingsEthylenePropylene,FEPencapsulated,Silicone,Viton®, Nitrile or Polypropylene felt.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi) 125°C(257°F): 1.5bar(22psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 80°C(176°F)
SterilisationIn situsteam80x30minutecyclesat135°C(275°F). Hotwater200x20minutecyclesat85-90°C(185-194°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe KlearfilTMValidationGuide.
Integrity TestingKlearfilTMfiltercartridgesarebatchtestedforintegrityusing the Bubble Point Test. Procedural details are availablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)KlearfilTM single cartridge exhibits the flow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
600
200
100
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow (l/min)
0 10
300
500
400
K02
K01
KP5
20
10
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow (l/min)
0 10
30
50
40
K15
K10
K05
K03
K20
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
A range of absolute rated cartridge filters from Porvair Filtration Group, featuring the latest developments in borosilicate glass fibre filter media technology, MicrofilTM cartridges are constructed from robust glass fibre and polypropylene filtration layers, offering removal ratings from 0.5 to 5 micron absolute.
MicrofilTMcartridgesaresuitableforabsoluteremovalofunwantedparticulatesandforpre-filtrationtomembranefilters.
TheMicrofilTM cartridges incorporate a polypropylene pre-filtrationlayer,combinedwithahighdirtcapacityglassfibremedia.Thishastheeffectoflongerservicelife,improvedoperatingcostsandsmallerprocessfootprint.
TheMicrofilTMfiltercartridgesarealsohighlyresistanttointegrityfailurecausedbysteamsterilisationandhaveexcellentchemicalcompatibilitycharacteristics.
Theyaresuitableforapplicationsrangingfrombioburdenreductionandtheclarificationofawiderange of process liquids and end products.
Typical Applications
• Foods and beverages
• Processwatersystems
• Pharmaceuticalsandbioprocessing
• Finechemicals
•Cosmetics
Features and Benefits
• Zetapotential.
• Highfiltrationarea. • Guaranteedremovalratings.
• Suitableforsteamandhotwatersanitisation.
• ResistancetoCleaning-In-Place(CIP)regimes.
• Full traceability.
• Controlledmanufacturingenvironment.
MicrofilTMAbsolute Rated Pleated Glass Fibre Cartridge Filters
Mic
rofil
TM P
re-F
ilte
r Ca
rtrid
ge
s Disp
osableFilterElementsandCartridges
44
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage180.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
45
Specifications
Materials of ManufactureFiltermedia: Glassfibre
Pre-filtrationlayer: Polypropylene
Supportlayers: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8")
Length: 1module(short): 125mm(5") 1module: 254mm(10"), 508mm(20") 2modules: 762mm(30"), 1016mm(40")
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedwithoutfurthertreatment.
Flushed: Flushedwithpyrogen-freewater.
Gaskets and O-RingsEthylenePropylene,FEPencapsulated,Silicone,Viton®, Nitrile or Polypropylene felt.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 80°C(176°F)
SterilisationIn situsteam20x30minutecyclesat130°C(266°F). Hotwater200x20minutecyclesat85-90°C(185-194°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe MicrofilTMValidationGuide.
Integrity TestingMicrofilTMfiltercartridgesarebatchtestedforintegrityusing the Bubble Point Test. Procedural details are availablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)MicrofilTM single cartridge exhibits the flow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
80
40
20
05 15 20 30
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 10
60
MO2
MO5
MO1
MP8
25
MP5
70
50
30
10
AbsoluteRemoval EffectiveFiltrationArea Rating (each254mm(10")module)
0.5, 0.8, 1.0, 2.0 and5.0µm 0.4m2 (4.4ft2)
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
A range of absolute rated cartridge filters from Porvair Filtration Group, featuring the latest developments in meltblown polypropylene filter media technology, Polyfil™ II cartridges are based on a robust all polypropylene construction, offering removal ratings from 0.5 to 105 micron absolute.
PolyfilTMIIcartridgesaresuitableforabsoluteremovalofunwantedparticulatesandforpre-filtrationtomembranefilters.
Thegradedmulti-layerpolypropylenemediaprovidepre-filtrationoftheprocessfluidpriortotheabsoluteratedfinallayer.TheuniquedesignofthePolyfilTM II cartridges helps to achieve lower running costs and a smallerprocessfootprint.
ThePolyfilTM II are also highly resistant to integrity failure causedbysteamsterilisationandhaveexcellentchemicalcompatibilitycharacteristics.
Theyaresuitableforapplicationsrangingfrombioburdenreductionandtheclarificationofawiderange of process liquids and end products.
Typical Applications
• Pharmaceuticalsandbioprocessing
• Foods and beverages
• Inksandcoatings
• Finechemicals
•Cosmetics
• Processwatersystems
Features and Benefits
• Gradedmulti-layermedia.
• Highfiltrationarea. • Guaranteedremovalratings.
• Suitableforsteamandhotwatersanitisation.
• Environmentallyfriendly.
• Full traceability.
• Controlledmanufacturingenvironment.
PolyfilTM II Absolute Rated Pleated Polypropylene Cartridge Filters
Poly
filTM
II P
re-F
ilte
r Ca
rtrid
ge
sDisp
osableFilterElementsandCartridges
46
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage180.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
47
Specifications
Materials of ManufactureFiltermedia: Polypropylene
Supportlayers: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8”)
Length: 1module(short): 125mm(5”) 1module: 254mm(10”), 508mm(20”) 2modules: 762mm(30”), 1016mm(40”)
Effective Filtration AreaUpto0.6m2per250mmmodule(dependingonporerating).
Cartridge TreatmentStandard: Cleanedwithoutfurthertreatment.
Flushed: Flushedwithpyrogen-freewater.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Gaskets and O-RingsEthylenePropylene,FEPencapsulated,Silicone,Viton®, Nitrile or Polypropylene felt.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi) 125°C(257°F): 1.5bar(22psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30lb/in2) 80°C(176°F): 1.0bar(15lb/in2) 100°C(212°F): 0.5bar(7lb/in2)
Operating TemperatureMaximumcontinuous: 80°C(176°F)
SterilisationIn situsteam80x30minutecyclesat135°C(275°F). Hotwater200x20minutecyclesat85-90°C(185-194°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe PolyfilTMIIValidationGuide.
Integrity TestingPolyfilTMIIfiltercartridgesarebatchtestedforintegrityusing the Bubble Point Test. Procedural details are availablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)PolyfilTM II single cartridge exhibits the flow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
05 15 20 30
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow (l/min)
0 10 25
3µm
2µm
1µm
16
8
4
12
20
24
P07
P05
P03
P02
05 15 20 30
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow (l/min)
0 10 25
P15
P10
16
8
4
12
20
24
05 15 20 30
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow (l/min)
0 10 25
P60
P40
P30
P20
P90
8
4
2
6
10
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow (l/min)
0 10
P07
P05
P03
30
20
10
40
50
P02
P01
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow (l/min)
0 10
P30
P20
P15
10
5
15
20
P10
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow (l/min)
0 10
P90
P60
P40
3
2
1
4
5
05 15 20
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow (l/min)
0 10
PP8
PP5
400
200
600
800
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
TekfilTM is a high flow, graded depth filter with high contaminant capacity for long life. Constructed from FDA approved polypropylene with excellent performance characteristics, it is an economic choice for a wide range of applications.
TekfilTM is available in a range of industrial standard lengthsaseitherabsoluteornominalratedcartridges.AlsoavailableinNylonconstructionforsolventfiltration.
Typical Applications
• Foods and beverages
• Pharmaceuticals
• Finechemicalsandsolvents
• Coatings
• Photographicchemicals
• Metalfinishingelectroplating
• Watertreatmentpriortoreverseosmosis
• Cosmeticsproductfilling
TekfilTMcartridgescanalsobeusedaspre-filtersorfinalfiltersinbulkinkjetfiltration;suitableformanufacturewithallmajorinktypes:
• Aqueous
• UV
• Solvent
• Dye
• Pigment
Features and Benefits
• Gradeddepthmedia.
• Highdegreeofchemicalcompatibility.
• Absoluteandnominalremovalratings.
• Suitableforsteamandhotwatersanitisation.
• Environmentallyfriendly.
TekfilTM Polypropylene Depth Cartridge Filters
Tekfi
lTM P
re-F
ilte
r Ca
rtrid
ge
sDisp
osableFilterElementsandCartridges
48
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage180.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
49
Specifications
Materials of ManufactureFiltermedia: Polypropylene/nylon
Endfittings: Polypropylene
Cartridge Dimensions (Nominal)Diameter: 63mm(2.5”)
Length: 254mm(10”), 508mm(20”) 762mm(30”), 1016mm(40”)
Gaskets and O-RingsEthylenePropylene,FEPencapsulated,Silicone,Viton®, NitrileorPolypropylenefeltavailablefornon-crush-fitend adapters.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 3.5bar(51psi) 60°C(140°F): 1.0bar(15psi) 80°C(176°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 80°C(176°F)
ExtractablesMinimumtotalextractables.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10")TekfilTM single cartridge exhibits the flow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
05 15 20
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow (l/min)
0 10
TN20 (Nominal)
TN10 (Nominal)
TN05 (Nominal)
30
20
10
40
50
TN01 (Nominal)
010 30 40
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow (l/min)
0 20
TA90 (Absolute)
300
200
400
500
100
TA10 (Absolute)
TA05 (Absolute)
TA03 (Absolute)
TA20 (Absolute)
TA12 (Absolute)
TA01 (Absolute)
TAP5 (Absolute)
010 30 40
Pre
ssur
e D
rop
(kg
/cm
2 )
Water Flow (l/min)
0 20
TA90 (Absolute)
0.3
0.2
0.4
0.5
0.1
TA10 (Absolute)
TA05 (Absolute)
TA03 (Absolute)
TA20 (Absolute)
TA12 (Absolute)
TA01 (Absolute)
TAP5 (Absolute)
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
TekfilTM GV meltblown filter cartridges are designed specifically for the filtration of high viscosity fluids, such as paints, inks and resins. The graded density of depth filters is highly suited for the retention of gels and other deformable particles.
TheTekfilTMGVfiltersaremanufacturedbycontrollingthefibrediameterswhichmaintainhightensilestrength,highvoidvolumeandhigherdifferentialpressurethanconventionalmeltblownfilters.
TekfilTMGVcartridgesprovideabsoluteandnominalfiltrationwheretheretentionofdeformableparticlesiscriticalatcosteffectiveprices.Suitableforthefiltrationofeitherviscoseinorganicandorganicliquids,TekfilTM cartridgescanbeusedasprefiltersorfinalfilters
Extensive research and selection of the latest and mostadvancedpolypropylenemeltblownfiltermedia,resultsinimprovedperformance,leadingtoextendedfilterlifeatagivenefficiency.
Theall-polypropyleneconstructionofthefiltersarefreefromsiliconeandbindersandensureszerofibremitigationduringtherecommendedprocessconditions.
AllTekfilTMGVfiltersareavailablewithawiderangeofthermallyweldedendcaps.
Typical Applications
• Highviscosityfluids
• Paints
• Inks
• Coatings
• Resins
Features and Benefits
• Graded depth media Thegradedstructureofthemediaprovidesprefiltrationoftheprocessfluidpriortotheabsoluteratedfinallayer.Thiscombinationprovideseconomyofuseandasmallerprocessfootprint.
• High degree of chemical compatability Constructed entirely of polypropylene offering broadchemicalcompatability.
• High dirt holding capacity Four layer graded density, providing true depth filtrationandhighdirtholdingcapacityforalonger service life.
• Absolute and nominal removal ratings TekfilTMGVcartridgesarevalidatedusingrecognisedindustrystandardtestmethods.
• Environmentally friendly TekfilTMGVfiltersareenvironmentallyfriendly,allspent cartridges can be readily incinerated to trace ash.
• Silicone Free TekfilTMGVfiltersaremanufacturedfromsiliconefreematerials,thereforeensuringnocontaminationofthefilteredproduct,whichcouldleadtotherejectionofthefinalproduct.
TekfilTM GVFilter Cartridge for the Filtration of Gels and ViscousFluids
Tekfi
lTM G
V F
ilte
r Ca
rtrid
ge
sDisp
osableFilterElementsandCartridges
50
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage180.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
51
Specifications
Materials of ManufactureFiltermedia: Polypropylene
Endfittings: Polypropylene
Cartridge Dimensions (Nominal)Diameter: 63mm(2.5”)
Length: 254mm(10”), 508mm(20”) 762mm(30”), 1016mm(40”)
Gaskets and O-RingsEthylenePropylene,FEPencapsulated,Silicone,Viton®, NitrileorPolypropylenefeltavailablefornon-crush-fitend adapters.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 5bar(73psi)
Recommended Changeout Pressure2.5bar(36psi)
Operating TemperatureMaximumcontinuous: 80°C(176°F)
ExtractablesMinimumtotalextractables.
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
The Trapfil™ filter from Porvair Filtration Group has been specifically developed for the retention of diatomite and polyvinylpolypyrrolidone (PVPP) particles. It is manufactured from materials which are 100% FDA (Food and Drug Administration) approved and fully welded for strength and integrity.
TheallpolypropyleneconstructionenablestheTrapfilTM filtertoberesistanttohotcausticsolutionandstandardCIPpractices.Itisalsocompatiblewithsteamandhotwater sanitising procedures.
Designedtobebackflushed in situtoremovediatomiteandPVPPparticles.TheTrapfilTMfilterhasbeenindustryproventowithstandupto100backflushcycleswithhotcausticsolutionat70-80ºC(158-176ºF).ThisbackflushingprocesswillregeneratetheTrapfilTMfilterprovidingtheenduserwithimprovedeconomics.
TheTrapfilTMfilterisavailableinavarietyoflengthsandindustrystandardadaptors.TrapfilTM cartridges are availablein5,10and15micronratings,validatedatBeta 5000.
EachTrapfilTMfiltercarriesauniqueserialnumbertoenablefulltraceabilityofmaterialcomponents.
Typical Applications
• Stabilisation
• Clarification
Features and Benefits
• Backflushing.
• Chemicalregeneration.
• Suitableforsteamandhotwatersanitisation.
• Guaranteedremovalratings.
• Full traceability.
• Controlledmanufacturingenvironment.
TrapfilTM Polypropylene Guard Filters for Clear, Bright Beverages
Tra
pfil
TM P
re-F
ilte
r Ca
rtrid
ge
s Disp
osableFilterElementsandCartridges
52
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage180.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
53
Specifications
Materials of ManufactureFiltermedia: Polypropylene
Supportlayers: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8”)
Length: 1module: 254mm(10”), 508mm(20”) 2modules: 762mm(30”), 1016mm(40”)
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedandflushedwithpyrogen-free
water.
Gaskets and O-RingsFDA approved Ethylene Propylene, FEP encapsulated, Silicone,Viton® or Nitrile.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 80°C(176°F)
SterilisationIn situsteam100x30minutecyclesat125°C(257°F). Hotwater250x20minutecyclesat85-90°C(185-194°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe TrapfilTMValidationGuide.
Integrity TestingTrapfilTMfiltercartridgesarebatchtestedforintegrityusing the Bubble Point Test. Procedural details are availablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)TrapfilTM single cartridge exhibits the flow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
AbsoluteRemoval EffectiveFiltrationArea Rating (each254mm(10")module)
5,10and15µm 0.53m2 (5.7ft2)
30
10
5
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow (l/min)
0 10
15
25
20
R15
R10
R05
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
A range of cartridge filters from Porvair Filtration Group, featuring the latest developments in membrane technology, Aquafil™ cartridges are based on a naturally hydrophilic polyethersulphone membrane with a mirrored asymmetric pore structure. When combined with quality all-polypropylene cartridge components and high integrity manufacturing techniques common to all Porvair cartridge filters, the polyethersulphone membrane provides a high strength, long life cartridge.
AquafilTMcartridgesexploitthenarrowporesizedistributionandhighvoidvolumeofthemediatoprovideachoiceofcartridgescapableofmeetingtherequirementsofmostapplications.CarefulmediaselectionensuresthatAquafilTM cartridges are suited toretentiondownto0.2micronratings.AquafilTM cartridgesofferhighfluxratesandlowdifferentialpressures,afeaturecommontopolyethersulphonemembranes.
AquafilTMcartridgesbenefitfromthelownon-specificprotein binding characteristics of polyethersulphone membranes.Theyarealsoresistanttosteamsterilisationandhaveexcellentchemicalcompatibilitycharacteristics.Furthermore,sincetheywillnothydrolyse,AquafilTM cartridges are ideal for use in ultra purewatersupplysystems(18MΩ.cm).
Asaconsequence,AquafilTM cartridges provide acombinationoffeaturesandbenefitsuntilnowunavailablefromcartridgesbasedonPVDF,nylon,mixedestersofcelluloseorpolysulphonemembranes.Theyaresuitableforapplicationsrangingfrombioburdenreductionandtheclarificationofawiderange of process liquids and end products.
Typical Applications
• Pure water supply
• Biopharmaceuticals
• Ophthalmicsolutions
• Electronicsandsemiconductors
• Finechemicals
• Beverages
Features and Benefits
• Removalratings
• Low protein binding.
• Will not hydrolyse.
• Excellentchemicalcompatibility.
• Suitableforsteamsterilising.
• Full traceability.
• Controlledmanufacturingenvironment.
AquafilTM Single Layer Polyethersulphone MembraneCartridgeFilters
Aq
uafil
TM M
em
bra
ne C
art
ridg
e F
ilte
rs
Disp
osableFilterElementsandCartridges
54
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage181.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
55
Specifications
Materials of ManufactureFiltermembrane: Polyethersulphone
Membranesupport: Polypropylene
Irrigationmesh(support): Polypropylene
Drainagelayer: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8”)
Length: 1module: 254mm(10”) 2modules: 508mm(20”) 3modules: 762mm(30”) 4modules: 1016mm(40”)
Effective Filtration Area
Gaskets and O-RingsFDA approved Ethylene Propylene, FEP encapsulated, Silicone,Viton® or Nitrile.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 60°C(140°F)
SterilisationIn situsteam80x20minutecyclesat125°C(257°F). Hotwater100x20minutecyclesat85-90°C(185-194°F).
ExtractablesMinimumtotalextractables.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)AquafilTM single cartridge exhibits theflow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
PoreSizeRating EffectiveFiltrationArea (each254mm(10")module)
0.2, 0.45, 0.65and1.2µm 0.69m2 (7.4ft2)
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
600
400
200
05 15 20 30
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 10
BT10
100
80
40
20
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 1025
60
BT04 A65
A120
A45
A20
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
A range of microbially rated cartridge filters from Porvair Filtration Group, featuring the latest developments in membrane technology, Biofil™ II cartridges are based on a naturally hydrophilic polyethersulphone (PES) membrane with a mirrored asymmetric pore structure. When combined with quality all-polypropylene cartridge components and high integrity manufacturing techniques common to all Porvair cartridge filters, the polyethersulphone membrane provides a high strength, long life cartridge of consistently precise microbial retention.
BiofilTMIIcartridgesexploitthenarrowporesizedistributionandhighvoidvolumeofthemediatoprovideachoiceofcartridgescapableofmeetingtherequirementsofmostapplications.CarefulmediaselectionensuresthatBiofilTM II cartridges are also very suited to critical particle control down to 0.04 micronratings.BiofilTMIIcartridgesofferhighfluxratesandlowdifferentialpressures,afeaturecommontopolyethersulphonemembranes.
BiofilTMIIcartridgesbenefitfromthelownon-specificprotein binding characteristics of polyethersulphone membranes.Theyarealsohighlyresistanttointegrityfailurecausedbysteamsterilisationandhaveexcellentchemicalcompatibilitycharacteristics.Furthermore,sincetheywillnothydrolyse,BiofilTM II cartridges are idealforuseinultrapurewatersupplysystems(18MΩ.cm).
Asaconsequence,BiofilTM II cartridges provide a combinationoffeaturesandbenefitsbeforenowunavailablefromcartridgesbasedonPVDF,nylon,mixedestersofcelluloseorpolysulphonemembranes.Theyaresuitableforapplicationsrangingfromsterilefiltration,bioburdenreductionandtheclarificationofawide range of process liquids and end products.
Typical Applications
• Biopharmaceuticals
• Ophthalmicsolutions
• Electronicsandsemiconductors
• Finechemicals
• Beverages
• Pure water supply
Features and Benefits
• Guaranteedmicrobialratings.
• Low protein binding.
• Will not hydrolyse.
• Excellentchemicalcompatibility.
• Cartridge integrity and low TOC levels.
• Suitableforsteamsterilising.
• Full traceability.
• Controlledmanufacturingenvironment.
BiofilTM II Polyethersulphone MembraneCartridgeFilters
Bio
filTM
II M
em
bra
ne C
art
ridg
e F
ilte
rsDisp
osableFilterElementsandCartridges
56
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage181.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
57
Specifications
Materials of ManufactureFiltermembrane: Polyethersulphone
Membranesupport: Polypropylene
Irrigationmesh(support): Polypropylene
Drainagelayer: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8")
Length: 1module: BiofilTM II Junior 1module: 254mm(10") 2modules: 508mm(20") 3modules: 762mm(30") 4modules: 1016mm(40")
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedandflushedwithpyrogen-free
water.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Gaskets and O-RingsFDA approved Ethylene Propylene, FEP encapsulated, Silicone,Viton® or Nitrile.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 85-90°C(185-194°F)
SterilisationIn situsteam80x20minutecyclesat125°C(257°F). Hotwater100x20minutecyclesat90°C(194°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe BiofilTMIIValidationGuide.
Integrity TestingEachBiofilTMIImoduleofeverycartridgeisindividuallyintegrity tested using the Diffusive Flow Test, which correlates to the HIMA and ASTM F838-05 bacterial challenge tests. Non-destructive integrity tests, such as Pressure Hold, Diffusive Flow and Bubble Point, can beperformedbycustomers.ProceduraldetailsareavailablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)BiofilTM II single cartridge exhibits the flow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
Absolute Microbial Effective Filtration Area Rating (each254mm(10")module)
0.04, 0.1, 0.2, 0.45, 0.65and1.2µm 0.69m2 (7.4ft2)
500
400
200
05 15 20 30
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 10
BT10
100
80
40
20
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 1025
60
BT04 BT65
BT120
BT45
BT20
300
100
500
400
200
05 15 20 30
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 10
BT10
100
80
40
20
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 1025
60
BT04 BT65
BT120
BT45
BT20
300
100
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
The Porvair Filtration Group Biofil™ Plus microbial rated cartridge has been developed and manufactured for the filtration of liquids within the pharmaceutical, biotechnology and other critical applications.
BiofilTM Plus utilises a naturally hydrophilic polyethersulphone(PES)membranewithamirroredasymmetricporestructure.Thecartridge’suniquebuiltinpre-filtrationmembranelayerprovideslongerlifeand higher throughput.
Whencombinedwithqualityall-polypropylenecomponentsandhighintegritymanufacturingtechniques,theBiofil™Plusfiltercartridgeisideallysuitedtothemostdemandingprocessconditions.
Porvair’sBiofilTM Plus cartridges are constructed in a cleanroomundertightlycontrolledconditionsusingadvanced,highlyspecialisedmachinery.Qualityandconsistency of product is assured by the quality control andmanufacturingprocedures,whichareinplacethroughoutallstagesofmanufacture.
BiofilTMPlusmembranecartridgesare100%integritytestedduringmanufacturebytheforwardflowdiffusiontestmethod.
Typical Applications
• Biopharmaceuticals
• Fermentation
• Ophthalmicsolutions
• API’s
• LVP’s
• Beverages
• Pure water supply
Features and Benefits
• Guaranteedmicrobialratings.
• Low protein binding.
• Will not hydrolyse.
• Excellentchemicalcompatibility.
• Cartridge integrity and low TOC levels.
• Suitableforsteamsterilising.
• Full traceability.
• Controlledmanufacturingenvironment.
BiofilTM Plus Double Layer Polyethersulphone MembraneCartridgeFilters
Bio
filTM
Plu
s M
em
bra
ne C
art
ridg
e F
ilte
rsDisp
osableFilterElementsandCartridges
58
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage181.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
59
Specifications
Materials of ManufacturePre-filtermembrane: Polyethersulphone
Finalmembrane: Polyethersulphone
Membranesupport: Polypropylene
Irrigationmesh(support): Polypropylene
Drainagelayer: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8”)
Length: 1module: BiofilTM Plus Junior 1module: 254mm(10”) 2modules: 508mm(20”) 3modules: 762mm(30”) 4modules: 1016mm(40”)
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedandflushedwithpyrogen-free
water.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Gaskets and O-RingsFDA approved Ethylene Propylene, FEP encapsulated, Silicone,Viton® or Nitrile.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 85-90°C(185-194°F)
SterilisationIn situsteam80x20minutecyclesat125°C(257°F). Hotwater100x20minutecyclesat85-90°C(185-194°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe BiofilTMPlusValidationGuide.
Integrity TestingEachBiofilTMPlusmoduleofeverycartridgeisindividually integrity tested using the Diffusive Flow Test, which correlates to the HIMA and ASTM F838-05 bacterial challenge tests. Non-destructive integrity tests, such as Pressure Hold, Diffusive Flow and Bubble Point,canbeperformedbycustomers.ProceduraldetailsareavailablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)BiofilTM Plus single cartridge exhibits theflow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
500
400
200
05 15 20 30
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 10
BT10
100
80
40
20
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 1025
60
BT04 BT65
BT120
BT45
BT20
300
100
180
100
20
05 15 20 30
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 10
BT10
100
80
40
20
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 1025
60
BT04 BT65
BT120
BT45
BT20
80
40
60
160
120
140
Absolute Microbial Effective Filtration Area Rating (each254mm(10")module)
0.2, 0.45 and 0.65µm 0.48m2 (5.2ft2)
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Chemifil™ cartridges are manufactured using a polypropylene membrane of uniform thickness and high voids, with a homogeneous structure and controlled pore size.
Designedfortheremovalofsub-micronorganicandinorganicparticulatematter,theinherentstructuralstabilityofthemembraneeliminatesanyriskofmediamigrationandminimisesthereleaseofparticles.
Forsolventandaggressivechemicalfiltrationapplications,ChemifilTM cartridges offer a wide range ofchemicalcompatibility.Suitableforthemostdemandingmicrofiltrationapplications,thecartridgescanbeusedforthefiltrationofaggressivechemicalsolutionsincludingacids,alkalis,solventsandetchants.
ChemifilTM cartridges can also be used for a wide range ofsterileventingandgasfiltrationapplications.
Typical Applications
• Finechemicalsandsolvents
• Photoresists and developers
• Purewatersupplysystems
• Sterile process gases
• Sterile vents
Features and Benefits
• Guaranteedmicrobialratings.
• FlowΔPcharacteristics.
• Steamsterilisation.
• Cartridge integrity and low TOC levels.
• Solventsandaggressivechemicals.
• Full traceability.
• Controlledmanufacturingenvironment.
ChemifilTM Polypropylene MembraneCartridgeFilters
Che
mifi
lTM M
em
bra
ne C
art
ridg
e F
ilte
rsDisp
osableFilterElementsandCartridges
60
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage181.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
61
Specifications
Materials of ManufactureFiltermembrane: Polypropylene
Membranesupport: Polypropylene
Irrigationmesh(support): Polypropylene
Drainagelayer: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Sealing: Fusionbonding
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8”)
Length: 1module: ChemifilTM Junior 1module: 254mm(10”) 2modules: 508mm(20”) 3modules: 762mm(30”) 4modules: 1016mm(40”)
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedandflushedwithpyrogen-free
water.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Gaskets and O-RingsEthylenePropylene,FEPencapsulated,Silicone,Viton® or Nitrile.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi) 125°C(257°F): 1.5bar(22psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 80°C(176°F)
SterilisationIn situsteam100x30minutecyclesat125°C(257°F)
ExtractablesMinimumtotalextractables.Pleaserefertothe ChemifilTMValidationGuide.
Integrity TestingEachChemifilTMmoduleofeverycartridgeisindividually integrity tested using the Diffusive Flow Test, which correlates to the HIMA and ASTM F838-05 bacterial challenge tests. Non-destructive integrity tests, such as Diffusive Flow, Water Intrusion, PressureHoldandBubblePoint,canbeperformedbycustomers.ProceduraldetailsareavailablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)ChemifilTM single cartridge exhibits theflow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
Gas Flow Rates• Typicalcleanairflowrate:
A254mm(10”)ChemifilTM single cartridge exhibits theflow-∆P characteristics indicated below.
250
50
050 150 200 250
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Air Flow Rate (Nm3/hr)
0 100
C20
C10
200
100
150
800
200
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Water Flow Rate (l/min)
0 10
C20
400
600
C10
250
50
050 150 200 250
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Air Flow Rate (Nm3/hr)
0 100
C20
C10
200
100
150
800
200
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Water Flow Rate (l/min)
0 10
C20
400
600
C10
Absolute Microbial Effective Filtration Area Rating (each254mm(10")module)
0.1 and 0.2µm 0.66m2 (7.1ft2)
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
FluorofilTM cartridges are manufactured using a highly hydrophobic ePTFE membrane offering exceptionally high gas flow rates at low pressure differentials.
FluorofilTMcartridgesarerecommendedforsterilegasfiltrationandventingapplications.ThehydrophobiccharacteristicsoftheePTFEmembranemakestheFluorofilTMfiltercartridgeparticularlysuitableforwetgassterilisingapplications,suchasfermenterairfeed.
Forsolventandaggressivechemicalfiltrationapplications,FluorofilTM cartridges offer a wide range ofchemicalcompatibilitywithhighthermalstability.Suitableforthemostdemandingmicrofiltrationapplications, the cartridges can be used for the filtrationofaggressivechemicalsolutionsincludingacids,alkalis,solventsandetchants.
Typical Applications
• Sterile process gases
• Sterile vents
• Finechemicalsandsolvents
• Photoresists and developers
• Purewatersupplysystems
Features and Benefits
• Guaranteedmicrobialratings.
• Bacterial spores and viruses. • FlowΔPcharacteristics.
• Steamsterilisation.
• Cartridge integrity and low TOC levels.
• Solventsandaggressivechemicals.
• Full traceability.
• Controlledmanufacturingenvironment.
FluorofilTM ePTFEMembraneCartridge Filters
Fluo
rofil
TM M
em
bra
ne C
art
ridg
e F
ilte
rsDisp
osableFilterElementsandCartridges
62
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage181.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
63
Specifications
Materials of ManufactureFiltermembrane: ePTFE
Membranesupport: Polypropylene
Irrigationmesh(support): Polypropylene
Drainagelayer: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Sealing: Fusionbonding
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8”)
Length: 1module: FluorofilTM Junior 1module: 254mm(10”) 2modules: 508mm(20”) 3modules: 762mm(30”) 4modules: 1016mm(40”)
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedandflushed,withoutfurther
treatment.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Gaskets and O-RingsEthylenePropylene,FEPencapsulated,Silicone,Viton® or Nitrile.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi) 125°C(257°F): 1.5bar(22psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 80°C(176°F)
SterilisationIn situsteam80x20minutecyclesat125°C(257°F). Hotwater100x20minutecyclesat90°C(194°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe FluorofilTMValidationGuide.
Integrity TestingEachFluorofilTMmoduleofeverycartridgeisindividuallyintegrity tested using the Diffusive Flow Test, which correlates to the HIMA and ASTM F838-05 bacterial challenge tests. Non-destructive integrity tests, such as Diffusive Flow, Water Intrusion, Pressure Hold and BubblePoint,canbeperformedbycustomers.ProceduraldetailsareavailablefromPorvair.
Gas Flow Rates• Typicalcleanairflowrate:
A254mm(10”)FluorofilTM single cartridge exhibits the flow-∆P characteristics indicated below.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)FluorofilTM single cartridge with 0.2µmmicrobialratingexhibitstheflow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
180
80
40
050 150 200 300
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Air Flow Rate (Nm3/hr)
0 100
3barg
250
2barg
1barg
0barg
120
160
140
60
20
100
250
50
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Water Flow Rate (l/min)
0 10
0.45µm
200
100
150
180
80
40
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Water Flow Rate (l/min)
0 10
250mm Cartridge
120
160
140
60
20
100
0.2µm
0.1µm
180
80
40
050 150 200 300
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Air Flow Rate (Nm3/hr)
0 100
3barg
250
2barg
1barg
0barg
120
160
140
60
20
100
250
50
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Water Flow Rate (l/min)
0 10
0.45µm
200
100
150
180
80
40
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Water Flow Rate (l/min)
0 10
250mm Cartridge
120
160
140
60
20
100
0.2µm
0.1µm
Absolute Microbial Effective Filtration Area Rating(inliquids) (each254mm(10")module)
0.02, 0.1, 0.2 and 0.45µm 0.73m2 (7.8ft2)
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Fluorofil™ Plus cartridges are manufactured using a highly hydrophobic ePTFE membrane. The enhanced ePTFE membrane offers exceptionally high gas flow rates at low pressure differentials.
FluorofilTMPluscartridgesarerecommendedforsterilegasfiltrationandventingapplications.ThehydrophobiccharacteristicsoftheePTFEmembranemakestheFluorofilTMPlusfiltercartridgeparticularlysuitable for wet gas sterilising applications, such as fermenterairfeed.
TheconstructionoftheFluorofilTM Plus cartridge has designfeaturesthatallowhighermembranesurfacearea, lower pressure drops and incorporates a stainless steelcoreforgreatermechanicalstrengthwhenoperatedathighertemperatures.
Typical Applications
• Sterile process gases
• Sterile vents
• Biotechnology
• Powder handling and tabletting
Features and Benefits
• Guaranteedmicrobialratings.
• Bacterial spores and viruses. • FlowΔPcharacteristics.
• Mechanical strength.
• Steamsterilisation.
• Cartridge integrity and low TOC levels.
• Full traceability.
• Controlledmanufacturingenvironment.
FluorofilTM Plus High Flow Sterile Gas Filters with ePTFE Membrane
Fluo
rofil
TM P
lus
Me
mb
rane
Ca
rtrid
ge
Filt
ers
Disp
osableFilterElementsandCartridges
64
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage181.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
65
Specifications
Materials of ManufactureFiltermembrane: ePTFE
Membranesupport: Polypropylene
Irrigationmesh(support): Polypropylene
Drainagelayer: Polypropylene
Innercore: 316Lstainlesssteel
Outersupport: Polypropylene
Endfittings: Polypropylene
Sealing: Fusionbonding
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8”)
Length: 1module: 127mm(5”) 1module: 254mm(10”) 2modules: 508mm(20”) 3modules: 762mm(30”) 4modules: 1016mm(40”)
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedandflushed,withoutfurther
treatment.
Gaskets and O-RingsEthylenePropylene,FEPencapsulated,Silicone,Viton® or Nitrile.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi) 125°C(257°F): 1.5bar(22psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating Temperature Maximumcontinuous: 80°C(176°F)
SterilisationIn situsteam500x30minutecyclesat135°C(275°F). In situsteamcyclesfor200hoursat142°C(286°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe FluorofilTMPlusValidationGuide.
Integrity TestingEachFluorofilTMPlusmoduleofeverycartridgeis individually integrity tested using the Diffusive Flow Test, which correlates to the HIMA and ASTM F838-05 bacterial challenge tests. Non-destructive integrity tests, such as Diffusive Flow, Water Intrusion, PressureHoldandBubblePoint,canbeperformedbycustomers.ProceduraldetailsareavailablefromPorvair.
Gas Flow Rates• Typicalcleanairflowrate:
A254mm(10”)FluorofilTM Plus single cartridge exhibitstheflow-∆P characteristics indicated below.
160
80
40
050 150 200 300
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Airflow Rate (Nm3/hr)
0 100
3barg
250
2barg
1barg
0barg
120
140
60
20
100
Absolute Microbial Effective Filtration Area Rating (each254mm(10")module)
0.2µm 0.8m2 (8.6ft2)
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
FluorofilTM F100 cartridges are manufactured using a highly hydrophobic 1 micron PTFE membrane. The enhanced PTFE membrane offers exceptionally high liquid flow rates at low pressure differentials, making FluorofilTM F100 cartridges ideally suited to solvent filtration.
Forsolventandaggressivechemicalfiltrationapplications,FluorofilTM F100 cartridges offer a wide rangeofchemicalcompatibilitywithhighthermalstability.Suitableforthemostdemandingmicrofiltrationapplications, the cartridges can be used for the filtrationofaggressivechemicalsolutionsincludingacids,alkalis,solventsandetchants.
Typical Applications
• Carbonfinesremoval
• Finechemicalandsolvents
• Photoresists and developers
Features and Benefits
• Guaranteed particle retention in a liquid challenge.
• FlowΔPcharacteristics.
• Cartridge integrity and low TOC levels.
• Solventsandaggressivechemicals.
• Full traceability.
• Controlledmanufacturingenvironment.
FluorofilTM
F100 PTFEMembraneCartridges for Solvent Filtration
Fluo
rofil
TM F
100
Me
mb
rane
Ca
rtrid
ge
Filt
ers
Disp
osableFilterElementsandCartridges
66
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage181.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
67
Specifications
Materials of ManufactureFiltermembrane: PTFE
Membranesupport: Polypropylene
Irrigationmesh(support): Polypropylene
Drainagelayer: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Sealing: Fusionbonding
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8”)
Length: 1module: 254mm(10”) 2modules: 508mm(20”) 3modules: 762mm(30”) 4modules: 1016mm(40”)
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedandflushed,withoutfurther
treatment.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Gaskets and O-RingsFEPencapsulated,Viton®, Ethylene Propylene, Nitrile or Silicone.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating Temperature (in water)Maximumcontinuous: 80°C(176°F)
ExtractablesMinimumtotalextractables.Pleaserefertothe FluorofilTMF100ValidationGuide.
Integrity TestingEachFluorofilTMF100moduleofeverycartridgeisindividually integrity tested using the Reverse Bubble Point Test, which correlates to the particle retention ratingdeterminedbythemodifiedOSUF-2SinglePassChallenge Test. Non-destructive integrity testing, using theReverseBubblePointTest,canbeperformedbytheenduser.ProceduraldetailsareavailablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)FluorofilTM F100 single cartridge with 1.0µmparticleretentionratingexhibitstheflow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
50
20
10
040 120
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Air Flow Rate (Nm3/hr)
0 80
3barg
160
30
40
60
20
05 15 25 30
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Water Flow Rate (l/min)
0 10
50
30
40
10
20
Absolute Micron Effective Filtration Area Rating(inwater) (each254mm(10")module)
1.0µm(β5000,99.98%) 0.68m2 (7.3ft2)
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
A range of microbially rated cartridge filters from Porvair Filtration Group, featuring the latest developments in membrane technology, Hydrofil™ HT cartridges are based on a naturally hydrophilic nylon membrane. When combined with quality all-polypropylene cartridge components and high integrity manufacturing techniques common to all Porvair cartridge filters, the nylon membrane provides a high strength, long life cartridge of consistently precise particle retention across a wide range of particle sizes.
HydrofilTMcartridgesexploitthenarrowporesizedistributionandhighvoidvolumeofthemediatoprovideachoiceofcartridgescapableofmeetingtherequirementsofmostapplications.CarefulmediaselectionensuresthatHydrofilTM cartridges are also very suitedtocriticalparticlecontroldownto0.03micronratings.HydrofilTMcartridgesofferhighfluxratesandlowdifferentialpressures,afeaturecommontonylonmembranes.
HydrofilTMcartridgesbenefitfromhighproteinbindingcharacteristicsofnylonmembranes.Theyarealsohighlyresistanttointegrityfailurecausedbysteamsterilisationandhaveexcellentchemicalcompatibilitycharacteristics.
HydrofilTM cartridges are ideal for use in ultra pure water supplysystems(18MΩ.cm).
AsaconsequenceHydrofilTM cartridges provide a combinationoffeaturesandbenefitsnothithertoavailablefromcartridgesbasedonPVDF,mixedestersofcelluloseorpolysulphonemembranes.Theyaresuitableforapplicationsrangingfromsterilefiltration,bioburdenreductionandtheclarificationofawiderange of process liquids and end products.
Typical Applications
• Biopharmaceuticals
• Electronicsandsemiconductors
• Finechemicals
• Beverages
• Pure water supply
Features and Benefits
• Guaranteedmicrobialratings.
• Excellentchemicalcompatibility. • Cartridge integrity and low TOC levels.
• Suitableforsteamsterilising.
• Full traceability.
• Controlledmanufacturingenvironment.
HydrofilTMNylon6.6MembraneCartridge Filters
Hyd
rofil
TM M
em
bra
ne C
art
ridg
e F
ilte
rsDisp
osableFilterElementsandCartridges
68
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage181.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
69
Specifications
Materials of ManufactureFiltermembrane: Nylon6,6
Membranesupport: Polypropylene
Irrigationmesh(support): Polypropylene
Drainagelayer: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8”)
Length: 1module: 254mm(10”) 2modules: 508mm(20”) 3modules: 762mm(30”) 4modules: 1016mm(40”)
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedandflushedwithpyrogen-free
water.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Gaskets and O-RingsFDA approved Ethylene Propylene, FEP encapsulated, Silicone,Viton® or Nitrile.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 60°C(140°F)
SterilisationIn situsteam30x25minutecyclesat125°C(257°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe HydrofilTMValidationGuide.
Integrity TestingEachHydrofilTMmoduleofeverycartridgeisindividuallyintegrity tested using the Diffusive Flow Test, which correlates to the HIMA and ASTM F838-05 bacterial challenge tests. Non-destructive integrity tests, such as Pressure Hold, Diffusive Flow and Bubble Point, can beperformedbycustomers.ProceduraldetailsareavailablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)HydrofilTM single cartridge exhibits the flow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
600
400
200
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 10
HT45
HT20
Absolute Microbial Effective Filtration Area Rating (each254mm(10")module)
0.03, 0.1, 0.2 and 0.45µm 0.69m2 (7.4ft2)
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
The Porvair Filtration Group Hydrofil™ Plus microbial rated cartridge has been developed and manufactured for the filtration of liquids in the pharmaceutical, biotechnology and other critical applications. Hydrofil™ Plus utilises a naturally hydrophilic Nylon 6.6 membrane with a mirrored asymmetric pore structure. The cartridge’s unique built in pre-filtration membrane layer provides longer life and higher throughput.
Whencombinedwithqualityall-polypropylenecomponentsandhighintegritymanufacturingtechniques,theHydrofilTMPlusfiltercartridgeisideallysuitedtothemostdemandingprocessconditions.
Porvair HydrofilTM Plus cartridges are constructed in a cleanroomundertightlycontrolledconditionsusingadvanced,highlyspecialisedmachinery.Qualityandconsistency of product is assured by the quality control andmanufacturingprocedures,whichareinplacethroughoutallstagesofmanufacture.
HydrofilTMPlusmembranecartridgesare100%integritytestedduringmanufacturebytheforwardflowdiffusiontestmethod.
Typical Applications
• Biopharmaceuticals
• Fermentation
• API’s
• LVP’s
• Beverages
• Pure water supply
Features and Benefits
• Guaranteedmicrobialratings.
• Excellentchemicalcompatibility.
• Cartridge integrity and low TOC levels.
• Suitableforsteamsterilising.
• Full traceability.
• Controlledmanufacturingenvironment.
HydrofilTM Plus Dual Nylon 6.6 Layer MembraneCartridgeFilters
Hyd
rofil
TM P
lus
Me
mb
rane
Ca
rtrid
ge
Filt
ers
Disp
osableFilterElementsandCartridges
70
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage181.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
71
Sterilisation
Materials of ManufacturePre-filtermembrane: Nylon
Finalmembrane: Nylon
Filtermembrane: Nylon
Membranesupport: Polypropylene
Irrigationmesh(support): Polypropylene
Drainagelayer: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8”)
Length: 1module: 254mm(10”) 2modules: 508mm(20”) 3modules: 762mm(30”) 4modules: 1016mm(40”)
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedandflushedwithpyrogen-free
water.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Gaskets and O-RingsFDA approved Ethylene Propylene, FEP encapsulated, Silicone,Viton® or Nitrile.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 60°C(140°F)
SterilisationIn situsteam30x25minutecyclesat125°C(257°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe HydrofilTMValidationGuide.
Integrity TestingEachHydrofilTMPlusmoduleofeverycartridgeisindividually integrity tested using the Diffusive Flow Test, which correlates to the HIMA and ASTM F838-05 bacterial challenge tests. Non-destructive integrity tests, such as Pressure Hold, Diffusive Flow and Bubble Point,canbeperformedbycustomers.ProceduraldetailsareavailablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)HydrofilTM Plus single cartridge exhibitstheflow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
2000
400
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 10
HTP20
1000
HTP10
800
1600
1400
1800
1200
600
200
Absolute Microbial Effective Filtration Area Rating (each254mm(10")module)
0.2µm 0.5m2 (5.38ft2)
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Vinofil™ membrane cartridges have been specifically designed, by Porvair Filtration Group for wine and beer filtration, as a final filter for cold biological stabilisation. Vinofil™ cartridges utilise a double layer of naturally hydrophilic polyethersulphone (PES) membrane with a mirrored asymmetric pore structure, which provides graded filtration throughout its depth, resulting in higher throughputs and long service life. When combined with quality all-polypropylene components and high integrity manufacturing techniques, the VinofilTM filter cartridge is ideally suited to the most demanding process conditions.
VinofilTMcartridgesexploitthenarrowporesizedistributionandhighvoidvolumeofthemediatoprovideachoiceofcartridgescapableofmeetingtherequirementsofmostapplications.CarefulmediaselectionensuresthatVinofilTM cartridges are also very suited to critical particle control down to 0.2 micronratings.VinofilTMcartridgesofferhighfluxratesandlowdifferentialpressures,afeaturecommontopolyethersulphonemembranes.
VinofilTMcartridgesbenefitfromthelowbindingcharacteristicsofpolyethersulphonemembranes.Theyare also highly resistant to integrity failure caused by steamsterilisationandhaveexcellentcompatibilitywith CIP sterilising agents.
AsaconsequenceVinofilTM cartridges provide a combinationoffeaturesandbenefitsnothithertoavailablefromcartridgesbasedonPVDF,nylon,mixedestersofcelluloseorpolysulphonemembranes.Theyaresuitableforapplicationsrangingfromsterilefiltration,stabilisationandtheclarificationofawiderange of beverages.
Typical Applications
• Wineandsparklingwine
• Beer
• Mineralwaterandsoftdrinks
• Process water supply
Features and Benefits
• Guaranteedmicrobialratings.
• Low binding and fouling.
• Will not hydrolyse.
• Excellentchemicalcompatibility.
• Cartridge integrity and low TOC levels.
• Suitableforsteamsterilising.
• Full traceability.
• Controlledmanufacturingenvironment.
VinofilTM DoubleLayerMembraneFilters for Wine and Beer Filtration
Vin
ofil
TM M
em
bra
ne C
art
ridg
e F
ilte
rsDisp
osableFilterElementsandCartridges
72
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage181.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
73
Specifications
Materials of ManufactureFiltermembranes: DualPolyethersulphone
Membranesupport: Polypropylene
Irrigationmesh(support): Polypropylene
Drainagelayer: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8”)
Length: 1module(short): 125mm(5”) 1module: 254mm(10”) 2modules: 508mm(20”) 3modules: 762mm(30”) 4modules: 1016mm(40”)
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedandflushedwithpyrogen-free
water.
Gaskets and O-RingsFDA approved Ethylene Propylene, FEP encapsulated, Silicone,Viton® or Nitrile.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 85-90°C(185-194°F)
SterilisationIn situsteam80x20minutecyclesat125°C(257°F). Hotwater100x20minutecyclesat85-90°C(185-194°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe VinofilTMValidationGuide.
Integrity TestingEachVinofilTMmoduleofeverycartridgeisindividuallyintegrity tested using the Diffusive Flow Test, which correlates to the HIMA and ASTM F838-05 bacterial challenge tests. Non-destructive integrity tests, such as Pressure Hold, Diffusive Flow and Bubble Point, can beperformedbycustomers.ProceduraldetailsareavailablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)VinofilTM single cartridge exhibits the flow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
180
160
120
40
20
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow (l/min)
Clean Water Flow vs Differential Pressure
0 10
140
60
100
80
0.65µm
0.45µm
0.2µm
Absolute Microbial Effective Filtration Area Rating (each254mm(10")module)
0.2, 0.45 and 0.65µm 0.48m2 (5.2ft2)
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
A range of absolute rated cartridge filters from Porvair Filtration Group, designed for retrofitting into existing junior-style housings. Featuring the latest developments in borosilicate glass fibre filter media technology, MicrofilTM Junior cartridges are constructed from robust glass fibre and polypropylene filtration layers, offering removal ratings from 0.5 to 5 micron absolute.
MicrofilTM Junior cartridges are suitable for absolute removalofunwantedparticulatesandforpre-filtrationtomembranefilters.
TheMicrofilTM Junior cartridges incorporate a polypropylenepre-filtrationlayer,combinedwithahighdirtcapacityglassfibremedia.Thishastheeffectoflongerservicelife,improvedoperatingcostsandsmallerprocessfootprint.
TheMicrofilTMJuniorfiltercartridgesarealsohighlyresistanttointegrityfailurecausedbysteamsterilisationandhaveexcellentchemicalcompatibilitycharacteristics.
Theyaresuitableforapplicationsrangingfrombioburdenreductionandtheclarificationofawiderange of process liquids and end products.
Typical Applications
• Small-scalepharmaceuticalsandbioprocessing
• Pilot-scale studies
• Batch processing
Features and Benefits
• Zetapotential.
• Highfiltrationarea.
• Guaranteedremovalratings.
• Suitableforsteamandhotwatersanitisation.
• Full traceability.
• Controlledmanufacturingenvironment.
MicrofilTM Junior Absolute Rated Pleated Glass Fibre Cartridge FiltersforSmall-ScaleApplications
Mic
rofil
TM J
unio
r Dis
po
sab
le F
ilte
rsDisp
osableFilterElementsandCartridges
74
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage182.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
75
Specifications
Materials of ManufactureFiltermedia: Glassfibre
Pre-filtrationlayer: Polypropylene
Supportlayers: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 56mm(2.2”)
Length: 77.5mm(2.5”) 136mm(5”)
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedwithoutfurthertreatment.
Flushed: Flushedwithpyrogen-freewater.
Gaskets and O-RingsJ-style: Silicone(othermaterialsareavailable
onrequest).
S-style: Notsupplied.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 80°C(176°F)
SterilisationJ-style: In situsteam70x25minutecyclesat130°C
(266°F).
S-style: Autoclave100x25minutecyclesat125°C(257°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe MicrofilTMValidationGuide.
Integrity TestingMicrofilTMJuniorfiltercartridgesarebatchtestedforintegrity using the Bubble Point Test. Procedural details areavailablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A136mm(5”)MicrofilTM Junior cartridge exhibits the flow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
180
20
02 8 10
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Water Flow Rate (l/min)
0 6
80
40
60
100
120
160
140
M01
MP8
MP5
4
AbsoluteRemoval EffectiveFiltrationArea Rating (for5"cartridge)
0.5, 0.8, 1.0, 2.0 and5.0µm 0.15m2 (1.6ft2)
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
A range of absolute rated cartridge filters from Porvair Filtration Group, designed for retrofitting into existing junior-style housings. Featuring the latest developments in meltblown polypropylene filter media technology, Polyfil™ Junior cartridges are based on a robust all polypropylene construction, offering removal ratings from 0.5 to 5 micron absolute.
PolyfilTM Junior cartridges are suitable for absolute removalofunwantedparticulatesandforpre-filtrationtomembranefilters.
Thegradedmulti-layerpolypropylenemediaprovidepre-filtrationoftheprocessfluidpriortotheabsoluteratedfinallayer.TheuniquedesignofthePolyfilTM Junior cartridges helps to achieve lower running costs andasmallerprocessfootprint.
ThePolyfilTM Junior are also resistant to integrity failure causedbysteamsterilisationandhaveexcellentchemicalcompatibilitycharacteristics.
Theyaresuitableforapplicationsrangingfrombioburdenreductionandtheclarificationofawiderange of process liquids and end products.
Typical Applications
• Small-scalepharmaceuticals
• Ophthalmicsolutions
• Electronicsandsemiconductors
• Small-scalefinechemicals
• Pilot-scale studies
• Inksandcoatings
Features and Benefits
• Gradedmulti-layermedia.
• Highfiltrationarea.
• Guaranteedremovalratings.
• Suitableforsteamandhotwatersanitisation.
• Environmentallyfriendly.
• Full traceability.
• Controlledmanufacturingenvironment.
PolyfilTM Junior Absolute Rated Pleated Polypropylene Cartridge FiltersSmall-ScaleApplications
Poly
filTM
Jun
ior D
isp
osa
ble
Filt
ers
Disp
osableFilterElementsandCartridges
76
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage182.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
77
Specifications
Materials of ManufactureFiltermedia: Polypropylene
Supportlayers: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 56mm(2.2”)
Length: 77.5mm(2.5”) 136mm(5”)
Effective Filtration AreaUpto0.15m2 (1.6ft2)per136mmmodule(dependingonporerating).
Cartridge TreatmentStandard: Cleanedwithoutfurthertreatment.
Flushed: Flushedwithpyrogen-freewater.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Gaskets and O-RingsJ-style: Silicone(othermaterialsareavailable
onrequest).
S-style: Notsupplied.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi) 125°C(257°F): 1.5bar(22psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 80°C(176°F)
SterilisationJ-style: In situsteam70x25minutecyclesat125°C
(257°F).
S-style: Autoclave100x25minutecyclesat125°C(257°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe PolyfilTMIIValidationGuide.
Integrity TestingPolyfilTMJuniorfiltercartridgesarebatchtestedforintegrity using the Bubble Point Test. Procedural details areavailablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A136mm(5”)PolyfilTM Junior cartridge exhibits the flow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
700
02 8 10
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Water Flow Rate (l/min)
0 6
200
100
500
300
600
400
P01
PP8
PP5
4
25
5
02 8 10
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Water Flow Rate (l/min)
0 6
10
20
15
P40
P20
P10
4
P05
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
A range of microbially rated cartridge filters from Porvair Filtration Group, designed for retrofitting into existing junior-style housings. Biofil™ Junior cartridges are based on a naturally hydrophilic polyethersulphone membrane with a mirrored asymmetric pore structure. When combined with quality all-polypropylene cartridge components and high integrity manufacturing techniques common to all Porvair cartridge filters, the polyethersulphone membrane provides a high strength, long life cartridge of consistently precise microbial retention.
BiofilTMJuniorcartridgesexploitthenarrowporesizedistributionandhighvoidvolumeofthemediatoprovideachoiceofcartridgescapableofmeetingtherequirementsofmostapplications.CarefulmediaselectionensuresthatBiofilTM Junior cartridges are also very suited to critical particle control down to 0.04 micronratings.BiofilTMJuniorcartridgesofferhighfluxratesandlowdifferentialpressures,afeaturecommontopolyethersulphonemembranes.
BiofilTMJuniorcartridgesbenefitfromthelownon-specificproteinbindingcharacteristicsofpolyethersulphonemembranes.Theyarealsohighlyresistanttointegrityfailurecausedbysteamsterilisationandhaveexcellentchemicalcompatibilitycharacteristics.Furthermore,sincetheywillnothydrolyse,BiofilTM Junior cartridges are ideal for use in ultrapurewatersupplysystems(18MΩ.cm).
AsaconsequenceBiofilTM Junior cartridges provide acombinationoffeaturesandbenefitsnothithertoavailablefromcartridgesbasedonPVDF,nylon,mixedestersofcelluloseorpolysulphonemembranes.Theyaresuitableforapplicationsrangingfromsterilefiltration,bioburdenreductionandtheclarificationofaof process liquids and end products.
Typical Applications
• Small-scalebiopharmaceuticals
• Ophthalmicsolutions
• Electronicsandsemiconductors
• Small-scalefinechemicals
• Pilot-scale studies
• Point-of-use water supply
Features and Benefits
• Guaranteedremovalratings.
• Low protein binding.
• Will not hydrolyse.
• Excellentchemicalcompatibility.
• Cartridge integrity and low TOC levels.
• Suitableforsteamsterilising.
• Full traceability.
• Controlledmanufacturingenvironment.
BiofilTM Junior Polyethersulphone MembraneCartridgeFiltersforSmall-ScaleApplications
Bio
filTM
Jun
ior D
isp
osa
ble
Filt
ers
Disp
osableFilterElementsandCartridges
78
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage182.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
79
Specifications
Materials of ManufactureFiltermembrane: Polyethersulphone
Membranesupport: Polypropylene
Irrigationmesh(support): Polypropylene
Drainagelayer: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 56mm(2.2”)
Length: 77.5mm(2.5”) 136mm(5”)
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedandflushedwithpyrogen-free
water.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Gaskets and O-RingsJ-style: Silicone(othermaterialsareavailable
onrequest).
S-style: Notsupplied.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 85-90°C(185-194°F)
SterilisationJ-style: In situsteam70x25minutecyclesat125°C
(257°F).
S-style: Autoclave100x25minutecyclesat125°C(257°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe BiofilTMIIValidationGuide.
Integrity TestingEachBiofilTMJuniormoduleofeverycartridgeisindividually integrity tested using the Diffusive Flow Test, which correlates to the HIMA and ASTM F838-05 bacterial challenge tests. Non-destructive integrity tests, such as Pressure Hold, Diffusive Flow and Bubble Point,canbeperformedbycustomers.ProceduraldetailsareavailablefromPorvair.
Gas Flow Rates• Typicalcleanwaterflowrate:
A136mm(5”)BiofilTM Junior cartridge exhibits the flow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
1000
400
200
05 15 20 30
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 10
0.45 micron
25
0.2 micron
800
600
Absolute Microbial Effective Filtration Area Rating (foreach5"cartridge)
0.04, 0.1, 0.2, 0.45, 0.65and1.2µm 0.19m2 (2.05ft2)
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
FluorofilTM Junior cartridges are manufactured using a highly hydrophobic ePTFE membrane and are designed for retrofitting into existing Junior-style housings. The enhanced ePTFE membrane offers exceptionally high gas flow rates at low pressure differentials (see graph).
TheJuniorrangeareavailableintwoformats:J-style,asingleopen-endedelementwithasingleinternalo-ringsealonthedownstreamendcapandS-style,asingleopen-endedelementincorporatinganintegralflangeonthedownstreamendcap.
FluorofilTMJuniorcartridgesarerecommendedforsmall-scalesterilegasfiltrationandventingapplications.ThehydrophobiccharacteristicsoftheePTFEmembranemakestheFluorofilTMJuniorfiltercartridgeparticularlysuitable for wet gas sterilising applications, such as small-scalefermenterairfeed.
Forsmall-scalesolventandaggressivechemicalfiltrationapplications,FluorofilTM Junior cartridges offer a widerangeofchemicalcompatibilitywithhighthermalstability.Suitableforthemostdemandingmicrofiltrationapplications, the cartridges can be used for the small-scalefiltrationofaggressivechemicalsolutionsincludingacids,alkalis,solventsandetchants.
FluorofilTM Juniors can be used in scale-up bench-top experimentsandpilotplantevaluationstoconfirmsuitability in new process applications.
Typical Applications
• Sterile vents
• Small-scalesterileprocessgases
• Small-scalefinechemicalsandsolvents
• Small-scalephotoresistsanddevelopers
Features and Benefits
• Zetapotential.
• Highfiltrationarea.
• Guaranteedremovalratings.
• Suitableforsteamandhotwatersanitisation.
• Full traceability.
• Controlledmanufacturingenvironment.
FluorofilTM Junior ePTFEMembraneCartridge Filters for Small-ScaleApplications
Fluo
rofil
TM J
unio
r Dis
po
sab
le F
ilte
rsDisp
osableFilterElementsandCartridges
80
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage182.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
81
Specifications
Materials of ManufactureFiltermembrane: ePTFE
Membranesupport: Polypropylene
Irrigationmesh(support): Polypropylene
Drainagelayer: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Sealing: Fusionbonding
Internaladaptorsupportring: Stainless steel
Cartridge Dimensions (Nominal)Diameter: 56mm(2.2”)
Lengths: 77.5mm(2.5”) 136mm(5”)
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedandflushed,withoutfurther
treatment.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Gaskets and O-RingsJ-style: Silicone(othermaterialsareavailable
onrequest).
S-style: Notsupplied.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi) 125°C(257°F): 1.5bar(22psi)
Operating TemperatureMaximumcontinuous: 80°C(176°F)
SterilisationAutoclave70x25minutecyclesat135°C(275°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe FluorofilTMValidationGuide.
Integrity TestingEachFluorofilTM Junior cartridge is individually integrity tested using the Diffusive Flow Test, which correlates to the HIMA and ASTM F838-05 bacterial challenge tests. Non-destructive integrity tests, such as Diffusive Flow, Water Intrusion, Pressure Hold and Bubble Point, can beperformedbycustomers.ProceduraldetailsareavailablefromPorvair.
Gas Flow Rates• Typicalcleanairflowrate:
A136mm(5”)FluorofilTM Junior cartridge exhibits the flow-∆P characteristics indicated below.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A136mm(5”)FluorofilTM Junior cartridge(J-style)with0.2µmmicrobialratingexhibitstheflow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1 centipoise, multiplytheindicateddifferential pressure by the viscosity in centipoise.
Absolute Microbial Effective Filtration Area Rating(inliquids) (for5"cartridge)
0.2µm 0.19m2 (2.05ft2)
180
80
40
020 60 80 100
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Air Flow Rate (Nm3/hr)
0 40
3barg
2barg
1barg
0barg
120
160
140
60
20
100
240
80
40
020 60 80 100
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Air Flow Rate (Nm3/hr)
0 40
3barg
2barg
1barg
0barg
120
160
140
60
20
100
220
200
180
J-Style S-Style
900
100
05 15 20
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Water Flow Rate (l/min)
0 10
400
200
300
500
600
800
700
180
80
40
020 60 80 100
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Air Flow Rate (Nm3/hr)
0 40
3barg
2barg
1barg
0barg
120
160
140
60
20
100
240
80
40
020 60 80 100
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Air Flow Rate (Nm3/hr)
0 40
3barg
2barg
1barg
0barg
120
160
140
60
20
100
220
200
180
J-Style S-Style
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Ventafil™ cartridges are manufactured using a highly hydrophobic ePTFE membrane and are designed for autoclave venting. The enhanced ePTFE membrane offers exceptionally high gas flow rates at low pressure differentials.
VentafilTM cartridges are designed with a ½" BSP malethreadforautoclaveandsmalltankventingapplications. The hydrophobic characteristics of the ePTFEmembranemakestheVentafilTMfiltercartridgeparticularlysuitableforrapidvacuumbreakinautoclaves.
Typical Applications
• Autoclave vents
• Sterile product storage vessels
Features and Benefits
• Guaranteedmicrobialratingsinaliquid challenge.
• Bacterial spores and viruses.
• FlowΔPcharacteristics.
• Steamsterilisation.
• Cartridge integrity and low TOC levels.
• Full traceability.
• Controlledmanufacturingenvironment.
VentafilTM ePTFEMembraneCartridge Filters for AutoclaveVenting
Ve
nta
filTM
Me
mb
rane
Ca
rtrid
ge
Filt
ers
Disp
osableFilterElementsandCartridges
82
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: Fororderinginformationpleasegotopage182.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
83
Specifications
Materials of ManufactureFiltermembrane: ePTFE
Membranesupport: Polypropylene
Irrigationmesh(support): Polypropylene
Drainagelayer: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Sealing: Fusionbonding
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8")
Length: 64mm(2.5") 136mm(5")
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedandflushed,withoutfurther
treatment.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Adaptor and O-RingSilicone(othermaterialsareavailableonrequest). ½"BSPmalethread.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi) 125°C(257°F): 1.5bar(22psi)
SterilisationIn situsteam70x25minutecyclesat135°C(275°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe FluorofilTMValidationGuide.
Integrity TestingEachVentafilTM cartridge is individually integrity tested using the Diffusive Flow Test, which correlates to the HIMA and ASTM F838-05 bacterial challenge tests. Non-destructive integrity tests, such as Diffusive Flow, Water Intrusion, Pressure Hold and Bubble Point, can beperformedbycustomers.ProceduraldetailsareavailablefromPorvair.
Clean Air Flow Rates• Typicalcleanairflowrate:
A136mm(5")VentafilTMcartridgeexhibitstheflow-∆P characteristics indicated below.
Clean Air Flow Rates
• Vacuumbreakapplication: Iftheinitialvacuumisat-980mbarg,thetimerequiredbeforethevacuumbreakconditionsrequired to safely open the autoclave door (at -20mbarg)areachieved,isindicatedbelow.
500
020 60 70 80
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Air Flow Rate (Nm3/hr)
0 40
200
400
300
100
5
2
0100 200 250 300
Cha
mb
er V
olu
me
(m
3 )
Time Required to Reach Vacuum Break(s) (secs)
0 150
3
1
503010
4
50
Absolute Microbial Effective Filtration Area Rating(inliquids) (for5"cartridge)
0.2µm 0.37m2 (4.0ft2)
500
020 60 70 80
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Air Flow Rate (Nm3/hr)
0 40
200
400
300
100
5
2
0100 200 250 300
Cha
mb
er V
olu
me
(m
3 )
Time Required to Reach Vacuum Break(s) (secs)
0 150
3
1
503010
4
50
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
85
Porvair Filtration Group manufacture a full range of stainless steel industrial and sanitary housings, available from 10 to 20bar (145-290psi), with both single and multi-element housings to suit every application. The housings have in-line BSP port connections for ease of installation. Tri-clover and weld connections are available.
Aspecialrangeofhigh-pressure350bar(5,076psi)rated housings are also available on request. Housings manufacturedfromotheralloysandmadetootherdesign codes are also available on request, please contact us for further details.
85
Filter Element and Cartridge Housings
Porvair Filtration Group manufacture a full range of stainless steel industrial and sanitary housings, available from 10 to 20bar (145-290psi), with both single and multi-element housings to suit every application. The housings have in-line BSP port connections for ease of installation. Tri-clover and weld connections are available.
Porvair Filtration Group’scurrentrangeoffilterhousingsareavailableinroundsfrom1-30.
Aspecialrangeofhigh-pressure350bar(5,076psi)rated housings are also available on request. Housings manufacturedfromotheralloysandmadetootherdesign codes are also available on request, please contact us for further details.
Typical Applications
• Metalfilterelements
• Disposablefiltercartridges
Features and Benefits
• Resistanttohightemperaturesandcorrosive environments. • Suitableforaggressiveairandliquidfiltration applications. • Inherent strength for long service life in arduous
applications.
• Controlledporesize,ensuresoptimumrepeatperformance.
Filter HousingsStainless Steel Industrial and Sanitary Housings
86
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Sta
inle
ss S
tee
l Filt
er H
ous
ing
sFilterElementandCartridgeHousings
Ordering Information: Fororderinginformationpleasegotopage184-185.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
87
Optional Material and Surface Treatments
• Stainless steel 316L
• Hastelloy®
• Internalweldsgroundflushandsmooth
• Electro polished
• Mirrorfinished
• Surfacefinish240grit
• Variouscoatings
Control Systems
Someofthecontroloptionsavailableare:
• Solenoid operated valve
• Controltimer
Coded Vessels
VesselscanbesuppliedtoBS5500,ASMEVIIIU’Stamp,ADM-TÜV.Otherstandardsareavailableuponrequest.
Thesystemsaredesignedandbuilttoindividualcustomersspecificationsandneeds.Atailoredpulsedjetsupplysystemisvitaltoagoodperformanceofthefilterassembly.
FILTER ELEMENT AND CARTRIDGE HOUSINGS
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Porvair Filtration Group filter housings have been designed for high efficiency filtration of gases and liquids in critical applications.
PorvairfilterhousingsareavailableinalternativematerialssuchasMonel® or Hastelloy® for applications that require a higher level of resistance to aggressive gases and liquids. BSPP pipe connections as standard, otherconnectionsareavailable.Manufacturedfromsolidsteelbarstock,inaccordancewithNACEMR-01-75specification,theycanbeusedinthepressurerangefromfullvacuumto350barg(5000psig).
Porvair range of polished stainless steel high pressure filterhousingscanbeorderedontheirownorsuppliedwithourfilterinsertsasacompleteassembly.TheseareavailableinSinterflo®FFibre,Sinterflo® M Mesh or Sinterflo®PPowderstainlesssteel.Avarietyoffiltrationratings are available, please enquire for details.
Typical Applications
• High purity bottled gas.
• Liquidorgassamplestoprocessanalysers
• Liquidorgassampleswithminimumresponsetime
• Highpressureorvacuumfiltration
• Sterile gas
• Precisionin-linevalvesandequipmentprotection
Features and Benefits
• Resistanttohightemperaturesandcorrosive environments.
• Robust and durable construction.
• Cleanable and reusable.
• Suitable for use in acidic gases.
• Idealforstacksampling.
• Low cost, long life unit.
• Canbeinstalledinpermanentanalysisequipment.
Specifications
Maximum pressure drop50bar(725psi)
Maximum pressure loss25bar(360psi)
Temperature range-250°C to 500°C (-425°F to 930°F)
High-Pressure Filter HousingsPolished Stainless Steel Housings
88
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Sta
inle
ss S
tee
l Filt
er H
ous
ing
sH
igh
Pre
ssu
re F
ilte
r Ho
usin
gs
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
89
FILTER ELEMENT AND CARTRIDGE HOUSINGS
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
91
Last chance filters perform a complimentary role to main system filters. These are designed to remove and retain contamination such as machining chips, burrs, wear debris and fluid breakdown products induced during operation or built in downstream of the main system filters.
Porvair Filtration Groupofferarangeoffilters,alldesignedtospecificperformanceandinstallationrequirements.Thesefiltersareavailableinthefollowingmediaconfigurations:
• Sinterflo®Fsinteredmetalfibre
• Sinterflo®Psinteredmetalpowder
• Sinterflo®Mmetalmesh
• Sinterflo®MCsinteredmetalmeshcomposite
• Laser drilled • Polymers:polypropylene,acetal,peek,nylon,
PTFE.
InprintaistheInkjetsalesdivisionofPorvair Filtration Group. Inprintadesignandmanufactureawiderangeofin-lineandlastchancefilterstooffersolutionsforinkjetfiltrationthroughoutthebodyoftheprinter.
Theseself-containedfilterassembliesareprovidedforvariedtypesofinkjetapplicationsincludingCIJcoding,textile,ceramicsandgraphics.
91
In-Line and Last Chance Filters
Porvair Filtration Group offer a comprehensive range of filters for complete system protection. These include metal mesh filter discs, which are available in both pleated and flat versions, to suit specific application requirements.
Themetalmeshfilterdiscsaredesignedandmanufacturedtoprovidefiltrationprotectioninliquidandgasflowsystems.
Thesecost-effectivemeshfilterdiscsprovideasignificantincreaseinfiltrationareaforasimilarinstallation.
Porvair Filtration Group’slightweightstainlesssteelfilterdiscsarecapableofoperatingwithavarietyoffluidsattemperaturesfrom-270-450°C(-454-842ºF),andwithdifferentialpressuresupto3bar(43psi).
Metalmeshfiltersareavailableintwodistincttypes,rimmedandunrimmed.
Typicalapplicationsincludespinpackfiltersusedinthemanufactureofman-madepolymerfibrematerialsfortextile products.
Typical Applications
• Liquidfiltration
• Airfiltration
• Hydraulics
• Spinpackfilters
Features and Benefits
• Low pressure drop.
• Easily cleanable.
• Highoperatingtemperatures.
Metal Mesh Filter DiscsFlat and Pleated
92
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Me
tal F
ilte
r Dis
cs
In-L
ine
an
d L
ast
Ch
an
ce
Filt
ers
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
93
Porvair Filtration Group can offer a comprehensive range of fibre disc filters for complete system protection in both gaseous and liquid applications. These can be supplied in either flat or pleated versions to suit requirements.
Inexpensiveflatdiscsaresuitedtoapplicationswherespacemaybeapremium,orwherelimitedcontaminantisexpected.
Forsystemswherealargerfiltrationareaorlowerpressuredropisrequiredbutstillwithinalimitedfootprint, we can offer a pleated disc. Both designs canbeofferedwithorwithoutasealingrimandinacomprehensiverangeoffiltrationratingstosuitavariety of operating conditions.
Typicalapplicationsincludespinpackfiltersusedinthemanufactureofmanmadepolymerfibrematerialsfortextile products.
Typical Applications
• Liquidfiltration
• Airfiltration
• Hydraulics
• Spinpackfilters
Features and Benefits
• Low pressure drop.
• Easily cleanable.
• Widerangeofoperatingtemperatures.
• Varietyoffiltrationratingsavailable.
• Lightweight and robust construction.
• Suitable for gaseous and liquid applications.
Metal Fibre Filter DiscsFlat and Pleated
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
IN-LINE AND LAST CHANCE FILTERS
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Porvair Filtration Group manufacture a wide range of metal powder filter discs, available in diameters from 0.5mm (0.02") to over 203mm (8") with a wide range of thicknesses.
Powdermetallurgytechniquesareusedtoproduceporous discs with interconnected porosity and densities rangingfrom35%to75%.Theporosityofthediscconsistsofawideporesizedistributioncentredaroundameanporesize.
Poroussinteredmetaldiscsareavailablein15differentstandardmicrongradeswithporesizesrangingfroma0.003to200micrometers.
Discsizesandtolerancesaredependentonthematerial,microngradeandthedensityrequirements.
Typical Applications
• Liquidandgasfiltration
• Frits
• Pressure snubbers
• Aerators
• Supportforchromatographycolumns
• Basecomponentsorassemblies
Features and Benefits
• Low pressure drop.
• Easily cleanable.
• Highoperatingtemperatures.
Metal Powder Filter DiscsFlat Discs
94
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Me
tal F
ilte
r Dis
cs,
In-L
ine
Ele
me
nts
and
Sc
ree
nsIn
-Lin
e a
nd
La
st C
ha
nc
e F
ilte
rs
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
95
To enhance performance capabilities, Porvair Filtration Group produce a vast range of tubular last chance filters and screens.
Designedtobefullyintegratedintocustomersystems,thesefiltersaremanufacturedusinganumberoftechniquesincludingmicroresistancewelding,fusionwelding,laserdrillingandinjectionmoulding.
Ourelementsaredesignedforlongon-streamlifeandcan be designed and constructed to withstand full systempressure.
Materials of construction • Stainlesssteelornickel-basedalloys
• Sinterflo®Fsinteredmetalfibre
• Sinterflo®Psinteredmetalpowder
• Sinterflo®Mmetalmesh
Typical Applications
• Hydraulics
• Pneumatics
• Oilandlubricationsystems
• Fuelsystems
• Printinginks
Features and Benefits
• Availableinpleatedorcylindricalelementdesigns.
• Varietyoffiltrationratingsavailabletosuitawiderange of applications.
In-Line Elements and Screens
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
IN-LINE AND LAST CHANCE FILTERS
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
In applications where the filter assembly is to be fitted for life or when it is not practical to handle the filter after use, Porvair Filtration Group can supply fully welded assemblies for direct installation into various systems. These are available in both metallic and polymeric forms, depending upon the system requirement.
Inmanyapplicationsthefilterdiscsortubularinsertsaresuppliedfullyintegratedintoaminiaturehousing,whichformspartofthecustomer’ssystemallowingeasyreplacementofthefilter.
Porvair Filtration Group’sfilterscanbeintegratedwithinavarietyofstandardindustryfittings.
Ourhousingscanbemadefromavarietyofmaterialsincludingaluminiumalloy,stainlesssteel,titaniumandengineeringthermoplastics.
Typical Applications
• Hydraulics
• Pneumatics
• Oilandlubricationsystems
• Fuelsystems
• Printinginks
Features and Benefits
• Availableinpleatedorcylindricalelementdesigns.
• Varietyoffiltrationratingsavailabletosuitawiderange of applications.
• Varietyofendfittingsavailableincludingthreadedandpush-fitbarbedconnectors.
Union Filters and Miniature Housings
96
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Uni
on
Filte
rs, M
inia
ture
and
In-L
ine
Ho
usin
gs
In-L
ine
an
d L
ast
Ch
an
ce
Filt
ers
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
97
For highly contaminated systems, Porvair Filtration Group have designed a range of in-line filter housing assemblies.
Thesefiltersfeaturearemovablepleatedorcylindricalfiltercartridgewithanincreasedfilterareaand,therefore, operational life. Additional optional features includebypassdevicesandsystemconditionmonitors.
Materials of construction • Stainlesssteelornickel-basedalloys.
• Varietyofpolymericmaterials.
Typical Applications
• Hydraulics
• Pneumatics
• Oilandlubricationsystems
• Fuelsystems
• Printinginks
Features and Benefits
• Varietyoffiltrationratingsavailabletosuitawiderange of applications.
• Varietyofendfittingsavailableincludingthreadedandpush-fitbarbedconnectors.
In-Line Filter Housings
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
IN-LINE AND LAST CHANCE FILTERS
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Fina
l Ink
and
In-L
ine
Filt
ers
In-L
ine
an
d L
ast
Ch
an
ce
Filt
ers
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
98
A final, or last chance filter, manufactured from stainless steel and is 100% chemically compatible to volatile inkjet materials.
Thisfullyweldedfiltergivesexcellentstructuralintegrityforthefiltermeshandeffectiveremovalofanyremainingcontaminantsbeforetheyreachtheprinthead.
Specifications
Filter Code8069
Materials of ManufactureFiltermedia: Stainlesssteelmesh Housingmaterial: Stainlesssteel
Micron Rating5µm,15µm,25µm,40µm
DimensionsFilterlength: 50mm(1.98") Filterwidth: 12mm(0.47")
Filter Area1.9cm2 (0.29in2)
Maximum Operating Pressure6bar(87psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
Final Ink Filters
Ordering Information: Fororderinginformationpleasegotopage186.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
99
A small in-line filter manufactured for digital inkjet printers.
Thestainlesssteelconstructionprovidesafilterwithlowextractablesand100%compatibilitywithallinkjetfluidsto ensure an extended life span.
Specifications
Filter Code8073
Materials of ManufactureFiltermedia: Stainlesssteelmesh Housingmaterial: Stainlesssteel
Micron Rating10µm
Dimensions Filterlength: 35mm(1.38") Filterwidth: 8mm(0.31")
Filter Area7cm2 (1.08in2)
Connectors2.6mmO/Dbarb
Maximum Operating Pressure6bar(87psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
In-Line FiltersStainless Steel
IN-LINE AND LAST CHANCE FILTERS
Ordering Information: Fororderinginformationpleasegotopage186.
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Ple
ate
d U
nrim
me
d a
nd M
icro
dis
c™
3SS
Dis
c F
ilte
rsIn
-Lin
e a
nd
La
st C
ha
nc
e F
ilte
rs
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
100
This is a small unrimmed stainless steel disc filter designed for use on inkjet printers.
Itisafullyweldedselfcontainedfilterwithanintegratedmeshmediainarangeofmicronratings.Completechemicalcompatibilitygivesthefilteranextended life span.
Specifications
Filter Code8071
Materials of ManufactureFiltermedia: Stainlesssteelmesh Housingmaterial: Stainlesssteel
Micron Rating2µm,5µm,10µm,20µm
DimensionsDiscdiameter: 9.5mm(0.37") Discwidth: 2.2mm(0.08")
Filter Area1.1cm2 (0.17in2)
Maximum Operating Pressure6bar(87psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
Pleated Unrimmed Disc Filters
Ordering Information: Fororderinginformationpleasegotopage186.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
101
The stainless steel in-line filter is designed to meet all digital inkjet requirements.
Superiorfiltrationintegrityisachievedthroughafullyweldedhousingincorporatingastainlesssteelmeshfilter.Fullchemicalcompatibilitygivesthefilteranextended lifespan.
Specifications
Filter Code8067
Materials of Manufacture
Filtermedia: Stainlesssteelmesh Housingmaterial: Stainlesssteel
Micron Rating5µm,10µm,20µm
DimensionsDiscdiameter: 30mm(1.18") Discwidth: 22mm(0.87")
Filter Area5cm2 (0.76in2)
ConnectorsBarb: 2.6mmO/Dbarb
4.9mmO/Dbarb
Maximum Operating Pressure6.5bar(94psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
MicrodiscTM 3SS30mmStainlessSteelDiscFilters
IN-LINE AND LAST CHANCE FILTERS
Ordering Information: Fororderinginformationpleasegotopage187.
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Mic
rod
isc
™ 4
SS D
isc
and
Grid
Filt
ers
In-L
ine
an
d L
ast
Ch
an
ce
Filt
ers
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
102
The stainless steel in-line filter, designed for graphics printers, is fully welded for complete filtration integrity.
Withexcellentflowratesthisfilteris100%chemicallycompatibletoallinkjetfluidsgivinganextendedlifespanandreducedprinterservicerequirements.
Specifications
Filter Code8077
Materials of Manufacture
Filtermedia: Stainlesssteelmesh Housingmaterial: Stainlesssteel
Micron Rating5µm,10µm,20µm
DimensionsDiscdiameter: 47mm(1.85") Discwidth: 30mm(1.18")
Filter Area13cm2 (2.01in2)
ConnectorsBarb: 2.6mmO/Dbarb
4.9mmO/Dbarb 6.5mmO/Dbarb
Jaco®: 3mmNPT: ¼" NPT
Maximum Operating Pressure6bar(87psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
MicrodiscTM 4SS47mmStainlessSteelDiscFilters
Ordering Information: Fororderinginformationpleasegotopage187.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
103
Asmallpre-headfiltermanufacturedfromstainlesssteelmesh.Thefiltercomescompletewithacompatibleo-ringandisdesignedasalastchancefiltergivingexcellentprotectiontotheprinthead.
Specifications
Filter Code8156
Materials of ManufactureFiltermedia: Stainlesssteelmesh
Micron Rating14µm
DimensionsDiscdiameter: 23mm(0.9") Discwidth: 2mm(0.08")
Filter Area4.2cm2 (0.65in2)
Maximum Operating Pressure5bar(72.5psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
Grid Filters and O-Rings
IN-LINE AND LAST CHANCE FILTERS
Ordering Information: Fororderinginformationpleasegotopage187.
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Porvair’s GasProTM high purity gas filtration products are optimised for the protection of critical valves, pressure regulators, mass flow controllers and other gas panel components used in microelectronics gas delivery equipment.
GasProTMcleanroom-packagedcompactfiltersaresuitableforoperationinharshenvironments,includinghighpressure(upto100psid@68°F(20°C))andhightemperature(850°F(455°C)),safeguardingcriticalcomponentsagainstparticledamage.
Theseinstallinto¼", ⅜" and ½"facevacuumseal(VCR®)fittings.
Porvair Filtration Group’s GasProTM range of products aremanufacturedinastateoftheartcleanroomusingISO9001CertifiedQualitySystem.
Our GasProTMGasketFiltersareprecisionweldedinaspeciallydesignedgloveboxwithatmospherepurification,pressureflushedwith0.003µmfilterednitrogen, no particle shedding, handled and packagedinClass100Cleanroom.
Typical Applications
• Microelectronicsgasdeliveryequipment
• Protection of critical valves
• Protection of pressure regulators
• Protectionofgaspanelcomponents
Features and Benefits
• Compact, in-line design Designedwithminimalsurfacearea,suitableforretrofittingintogaspanelswhilemaintainingtheoverall gas panel footprint.
• Economical Nofilterhousingisrequired.
• Removal ratings Highparticleretentionefficiencyat0.003µmand0.3µm.
• Robust construction Gasketshavea10Rasurfacefinish.Poroussinteredpowdermetalfiltersareavailablein316Lstainlesssteel, Hastelloy®C22andnickelwith0.003µmfilterremovalrating.
• Service in severe environments Excellentcorrosionresistanceandcompatiblewith a wide range of processing gases. Superior mechanicalstrengthforhighpressure(100psid@68°F (20°C))andelevatedtemperatureresistance(850°F (455°C))forinertgasapplications.
GasProTM
GasketFilters
104
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ga
sPro
™ G
ask
et F
ilte
rsIn
-Lin
e a
nd
La
st C
ha
nc
e F
ilte
rs
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team. Visit us online for current and comprehensive Gasket filter information.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
105
Specifications
Surface FinishAll GasProTMgasketshavea10Ra,orbetter,surfacefinishandareelectropolished.
Gasket Clip RetainerGasketclipretainersareavailableforsomeofourproducts, please contact a Porvair Filtration Group representativeforfurtherinformation.
Product Selection
IN-LINE AND LAST CHANCE FILTERS
GasProTM FlowRating FilterRating Gasketand Connects Filter Filter Gasket PartNumber (@90psigInlet/2psid) Filter Material Into OutsideDiameter OverallLength OutsideDiameter
9101 1slpm 0.003µm 316L Stainless Steel ¼"Tube 0.16"(4mm) 1.03"(26.1mm) 0.47"(11.9mm)
9101-R 1slpm 0.003µm 316L Stainless Steel ¼"Tube 0.16"(4mm) 1.03"(26.1mm) 0.47"(11.9mm)
9201 1slpm 0.003µm Hastelloy®C22 ¼"Tube 0.16"(4mm) 1.03"(26.1mm) 0.47"(11.9mm)
9103 3slpm 0.003µm 316L Stainless Steel ¼"Tube 0.16"(4mm) 3.03"(77mm) 0.47"(11.9mm)
9120 20slpm 0.3µm 316L Stainless Steel ¼"Tube 0.16"(4mm) 1.03"(26.1mm) 0.47"(11.9mm)
9150 50slpm 0.3µm 316L Stainless Steel ½"Tube 0.27"(7mm) 1.03"(26.1mm) 0.78"(19.8mm)
9150-R 50slpm 0.3µm 316L Stainless Steel ½"Tube 0.27"(7mm) 1.03"(26.1mm) 0.78"(19.8mm)
9302 2slpm 0.003µm Nickel ¼"Tube 0.16"(4mm) 1.03"(26.1mm) 0.47"(11.9mm)
9304 4slpm 0.003µm Nickel ¼"Tube 0.16"(4mm) 3.03"(77mm) 0.47"(11.9mm)
9320 20slpm 0.3µm Nickel ¼"Tube 0.16”(4mm) 1.03"(26.1mm) 0.47"(11.9mm)
9350 50slpm 0.3µm Nickel ½"Tube 0.27"(7mm) 1.03"(26.1mm) 0.78"(19.8mm)
9430* 30slpm 0.3µm 316L Stainless Steel ¼"Tube 0.16"(4mm) 1.03"(26.1mm) 0.47"(11.9mm)
* Filter element is made from laminated sintered wire mesh.Standard product combinations are shown in the table above, please contact a Porvair Filtration Group representative for our full product range.
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Porvair GasProTM high purity Sinterflo® P sintered powder metal media for OEM filters and purifiers, is used in critical Semiconductor and Microelectronics gas handling applications.
The GasProTMporousSinterflo®Psinteredpowdermetalfiltermediaconsistsofarigid,3dimensionalnetworkofextremelyfinepores.Thesehighefficiencyfiltersareofferedin316Lstainlesssteel,nickelorHastelloy® C22 media.
Thefiltermediawillwithstandapressuredifferentialof68bar(1000psi).Themechanicalstrengthofthe316Lstainlesssteelfilterhousingswillprovidereliableservicefor over 100,000 cycles in high pressure service (258bar (3750psig)@20°C(68°F)).
GasProTMhigh-purityfilterweldingisperformedinanultra-highpurityinertatmospheretoensurethebestweldquality.Allfiltersare100%integritytested,100%heliumleakchecked,cleanedanddried,thendouble-baggedinaClass100Cleanroomtoensurethehighest out-of-box quality and cleanliness.
Typical Applications
• Semiconductorandmicroelectronicsgashandling applications.
• OEMfilters
• Purifiers
Features and Benefits
• Superior filter efficiency Poroussinteredpowdermetalpointofusefiltersareproventoprovidegreaterthan9LRV(99.9999999%)particleretentionefficiencyat0.003µm(3nanometers)andatthemostpenetratingparticlesizeof0.08µmperSEMIF38-0699ingasfiltrationapplications.
• Service in severe environments PorousSinterflo®Psinteredpowdermetalmediaprovidesexcellentmechanicalstrength,enhancedcorrosionresistanceandelevatedtemperatureserviceinsevereenvironments.
• Temperature resistance The all 316L stainlesssteelornickelconstructionprovideselevatedtemperatureserviceupto500°C(930°F)andanallHastelloy® C22 construction is rated for700°C(1290°F)inreducingorinertgasapplications.
• Corrosion resistance Our GasProTMpointofusefilterhardwarefeatures5Ra, electro polished surfaces to prevent corrosion andparticleformationforyearsofreliableservice.Robust construction and excellent corrosion resistance allowforserviceinawiderangeofetchingandCVDprocessing gases.
GasProTM HighPuritySinterflo® P Metal Powder Filters
106
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ga
sPro
™ S
inte
rflo
® P
Me
tal P
ow
de
r Filt
ers
In-L
ine
an
d L
ast
Ch
an
ce
Filt
ers
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team. Visit us online for current and comprehensive Sinterflo® P filter information.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
107
Specifications
Materials of Construction9100series: 316Lmediaand316LVAR
hardware
9200series: Hastelloy®C22mediaandHastelloy® hardware
9300series: Nickelmediaand316LVARhardware
Removal Rating3nm
Filter EfficiencyGreaterthan9LRV(99.9999999%)
Tested to most penetrating particle size of 0.08µm per SEMI F38-0699 by independent laboratory.
Internal Surface Finish-5Ra electropolish
Product Selection
Operating ConditionsMaximumtemperature: Hastelloy® C22 rated to
700°C (1290°F)
Maximumservicepressure: 256bar(3750psig) @20°C (68°F)
Maximumforward/reverse differentialpressure: 68bar(1000psi)
Downstream CleanlinessVolatiles*(moisture,oxygen andTHC’seach): <10ppb
Particles: Noparticlecontribution
Quality AssuranceClass100CleanroommanufacturedinISO9001CertifiedQualitySystemfacility.
100% integrity tested.
100%heliumleaktestedto>1x10-9atmcc/second.
IN-LINE AND LAST CHANCE FILTERS
* For additional fitting types and sizes, please contact a Porvair Filtration Group distributor or representative.
Series Part Rated Description Filter Filter Filter Filter Removal Number Flow Housing Length Media Housing Rating (OutsideDiameter) (inch(mm)) (µm)
GP-9315-15-4 15slpm ¼"M/Mfaceseal 1”(25.4mm) 3.31”(84.1mm)
GP-9330-15-4 30slpm ¼"M/Mfaceseal 1”(25.4mm) 3.31”(84.1mm)
9300 GP-9375-15-4 75slpm ¼"M/Mfaceseal 1"(25.4mm) 5"(127mm) Nickel 316LVAR 0.003µm GP-93100-45-8 100slpm ½"facesealmale 2"(50.8mm) 5"(127mm)
GP-93300-45-8 300slpm ½"facesealmale 2"(50.8mm) 11.22" (285mm)
GP-9208-15-4 8slpm ¼"M/Mfaceseal 1"(25.4mm) 3.31"(84.1mm)
9200 GP-9245-45-4 45slpm ¼"M/Mfaceseal 2"(50.8mm) 5"(127mm) Hastelloy® C-22 Hastelloy® C-22 0.003µm GP-9160-45-4 100slpm ½"M/Mfaceseal 2"(50.8mm) 11.22" (285mm)
GP-9110-15-4 10slpm ¼"M/Mfaceseal 1"(25.4mm) 3.31"(84.1mm)
GP-9130-45-4 30slpm ¼"M/Mfaceseal 2"(50.8mm) 5"(127mm)
9100 GP-9160-45-4 60slpm ¼"M/Mfaceseal 2"(50.8mm) 5"(127mm) 316LStainlessSteel 316LVAR 0.003µm GP-91150-45-8 150slpm ½"facesealmale 2"(50.8mm) 11.22"(285mm)
GP-91300-45-8 300slpm ½"facesealmale 2"(50.8mm) 11.22" (285mm)
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Porvair GasProTM high purity Sinterflo® F sintered fibre metal media is used in critical Semiconductor, Photovoltaic and other Microelectronics gas handling applications.
ThisincludesgasdistributionanddeliverysystemsthatareusedwithinthethinfilmdepositionprocessusedtomakePhotovoltaic(PV)devices.PV1seriesfiltersremovesolidcontaminantsfromprocessgasessuchasargon,ammonia,nitrogenandsilaneusedinPlasmaEnhancedChemicalVaporDeposition(PECVD)systemsduringthemanufacturingoffrontglassandsolar cell panels.
GasProTMhigh-purityfilterweldingisperformedinanultra-highpurityinertatmospheretoensurethebestweldquality.Allfiltersare100%heliumleakchecked,100% integrity tested, cleaned and dried, then bagged inaClass100Cleanroomtoensurethehighestout-of-box quality and cleanliness.
PV1filtersarealsoavailablewithmorerelaxed,wettedhardwaresurfacespecificationsforadditionalcostsavings depending on the application and the service environment.
Typical Applications
• Semiconductorandmicroelectronicsgashandling applications.
• OEMfilters
• Purifiers
Features and Benefits
• Superior filter efficiency Poroussinteredfibremetalin-linefiltersareproventoprovide9LRV(99.9999999%)particleretentionefficiencyat0.003µm(3nanometers)andatthemostpenetratingparticlesizeof0.08µm.
• Service in severe environments PorousSinterflo®Fsinteredfibremetalmediaprovidesexcellentmechanicalstrength,enhancedcorrosionresistanceandelevatedtemperatureserviceoperation.
• Corrosion resistance Our GasProTMpointofusefilterhardwarefeatures7Ra, electro polished surfaces to prevent corrosion andparticleformationforyearsofreliableservice.Robust construction and excellent corrosion resistance allowforserviceinawiderangeofetchingandCVDprocessing gases.
GasProTM HighPuritySinterflo® F Metal Fibre and Photovoltaic Filters
108
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ga
sPro
™ S
inte
rflo
® F
Me
tal F
ibre
and
Pho
tovo
ltaic
Filt
ers
In-L
ine
an
d L
ast
Ch
an
ce
Filt
ers
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team. Visit us online for current and comprehensive GasProTM series and PV1 Sinterflo® F filter information.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
109
Specifications
Materials of ConstructionTEM1700series: 316Lstainlesssteelmediaand
hardware
TEM3700series: Nickelmediaand316Lstainlesssteel hardware
PV1series: 316Lstainlesssteelmediaandhardware
Removal RatingTEM1700and3700series: 3nm
PV1series: 1.0µm
Internal Surface FinishTEM1700and3700series: 7Ra
PV1series: 10Ra
Product Selection
Operating ConditionsMaximumtemperature: 454°C (850°F)
Maximumservicepressure: 3,000psi@121°C (250°F)
Downstream CleanlinessVolatiles(preconditionedoption) (moisture,oxygenand THC’seach): <10ppb
Particles: <1particle/ft3
Quality AssuranceClass100CleanroommanufacturedinISO9001CertifiedQualitySystemfacility.
100% integrity tested.
100%heliumleaktestedto>1x10-9atmcc/second.
IN-LINE AND LAST CHANCE FILTERS
* Fitting options are CMP (compression seal for tubing), VCR® (VCR® gasket face seal) and BWT (butt weld tube stubbs).** Overall housing length is dependent on the fitting(s) selected.
Series Part Rated Fitting(s)* Filter Filter Filter Filter Removal Number Flow Housing Length** Media Housing Rating (OutsideDiameter) (inch(mm)) (µm)
TEM-1770 30slpm ¼", ⅜",CMP,VCR®,BWT 1"(25.4mm) 3.3"-4.68"(84-119mm)
TEM-1700 100slpm ¼", ⅜",CMP,VCR®,BWT 1.5"(38.1mm) 3.3"-4.68"(84-119mm)
TEM-1740 150slpm ¼", ⅜",½",CMP,VCR®, BWT 2"(50.8mm) 3.3"-4.68"(84-119mm) 1700
TEM-1790 340slpm ½", ¾", 1" CMP,VCR®, BWT 3"(76.2mm) 3.3"-4.68"(84-119mm) 316L Stainless Steel 316L Stainless Steel 0.003µm
TEM-1780 708slpm ½", ¾", 1" CMP,VCR®, BWT 4"(101.6mm) 3.3"-4.68"(84-119mm)
TEM-1760 2125slpm 1", 1¼", 1½", CMP,VCR®, BWT 6"(152.4mm) 3.3"-4.68"(84-119mm)
TEM-1770 30slpm ¼", ⅜",CMP,VCR®,BWT 1"(25.4mm) 3.3"-4.68"(84-119mm)
TEM-1700 100slpm ¼", ⅜",CMP,VCR®,BWT 1.5"(38.1mm) 3.3"-4.68"(84-119mm)
TEM-1740 150slpm ¼", ⅜",½",CMP,VCR®, BWT 2"(50.8mm) 3.3"-4.68"(84-119mm) 3700
TEM-1790 340slpm ½", ¾", 1" CMP,VCR®, BWT 3"(76.2mm) 3.3"-4.68"(84-119mm) Nickel 316LStainlessSteel 0.003µm
TEM-1780 708slpm ½", ¾", 1" CMP,VCR®, BWT 4"(101.6mm) 3.3"-4.68"(84-119mm)
TEM-1760 2125slpm 1", 1¼", 1½", CMP,VCR®, BWT 6"(152.4mm) 3.3"-4.68"(84-119mm)
PV1-1100 75slpm ¼", ⅜",1½",CMP,VCR®,BWT 1"(25.4mm) 3.3"-4.68"(84-119mm) PV1
PV1-1200 200slpm ¼", ⅜",1½",CMP,VCR®,BWT 1.5"(38.1mm) 1.7"-2.1"(43.2-53.3mm) 316L Stainless Steel 316L Stainless Steel 1µm
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Porvair GasProTM high purity TeflonTM (PTFE) filters products are used in critical Semiconductor and Microelectronics gas handling applications.
GasProTMfilterswithaveryhydrophobicPTFEmembraneareidealforapplicationsthatrequirethehighestgascompatibility.Teflonmembranesupportsprovide the highest degree of cleanliness while polypropylene supported PTFE is available for less critical high purity applications.
GasProTMHighPurityTeflonfiltersofferanoutstandingcost-fluxratevaluecomparedtoall-metalfilters,maintaininghigh3nmparticleremovalefficiency.
ManufacturedinastateoftheartcleanroomusingISO9001CertifiedQualitySystem.ADIwaterflush,followedbyahighpressure,0.003µmfilterednitrogenflushremovesparticlesandpreventsparticleshedding.Theyarevacuumdriedtolessthan10ppbmoistureasneeded and the organics are less than 10ppb THC.
Allfiltersare100%heliumleakchecked,100%integritytested, cleaned and dried, then bagged in a Class 100 Cleanroomtoensurethehighestout-of-boxqualityand cleanliness.
Typical Applications
• Semiconductor,microelectronicsandphotovoltaic gas handling applications
Features and Benefits
• Superior filter efficiency OurporousPTFEfiltersareproventoprovideparticleretentionefficiencyat0.003µm(3nanometers)ingasfiltrationapplications.
• Service environment PorousPTFEfiltermediaprovidesexcellentpermeabilityandchemicalresistance.Thefilterassemblieshavea316Lstainlesssteelhousingandatemperatureresistanceupto100°C(212°F)inreducing or inert gas applications.
• Corrosion resistance Our GasProTMpointofusefilterhardwarefeatures10Ra, electro polished surfaces to prevent corrosion andparticleformationforyearsofreliableservice.Robust construction and excellent corrosion resistance allow for service in a wide range of etching gas distribution applications.
• Cleanliness OurpointofusefiltersaremanufacturedinaClass100Cleanroomtoinsureparticlefree,chemicallyclean, organic free handling and bagging, maximizingtheout-of-packagecleanliness.
• Best in class quality GasProTMTeflonfiltersare100%integritytestedandheliumleakcheckedto1x10-9atmcc/sec.
GasProTM
HighPurityTeflonFilters
110
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ga
sPro
™ T
eflo
n Fi
lters
In-L
ine
an
d L
ast
Ch
an
ce
Filt
ers
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team. Visit us online for current and comprehensive GasProTM Teflon filter information.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
111
IN-LINE AND LAST CHANCE FILTERS
Specifications
Materials of ConstructionPTFEorPolypropylene(Viton®)mediaand316Lstainlesssteel hardware
Removal Rating3nm
Internal Surface Finish10Ra
Operating ConditionsFormaximumtemperatureandmaximumservicepressure please see the table below.
Product Selection
Downstream CleanlinessVolatiles(preconditionedoption) (moisture,oxygenand THC’seach): <10ppb
Particles: <1particle/ft3
Quality AssuranceClass100CleanroommanufacturedinISO9001CertifiedQualitySystemfacility.
100% integrity tested.
100%heliumleaktestedto>1x10-9atmcc/second.
* Overall housing length is dependant on fitting selected.** Fitting options CMP: compression seal for tubing; NPT: national pipe thread - tapered; VCR®: VCR® gasket face seal; VCO: VCO O-ring seal; BWT: butt weld tube stubs.
Part FilterFlow Porous Other Housing Porous Filter Filter MaximumMaximumFitting Number Rating FilterMedia Support HardwareFilter Housing Housing Housing Service Options** (@90psig) Material Materials Material Area OD Length* Pressure Temp at250°F
TEM-000 400scfm(11327lpm) PTFE(TeflonTM) Polypro/Viton® 316L SS 28ft2 3" 45” 250psig 200°F 1",1.5";CMP,VCR®, BWT
TEM-100 300scfm(8495lpm) PTFE(TeflonTM) Polypro/Viton® 316L SS 16.5ft2 3" 35" 250psig 200°F 1",1.5";CMP,VCR®, BWT
TEM-200 200scfm(5663lpm) PTFE(TeflonTM) Polypro/Viton® 316L SS 11ft2 3" 25" 250psig 200°F 1",1.5";CMP,VCR®, BWT
TEM-300 120scfm(3998lpm) PTFE(TeflonTM) Polypro/Viton® 316L SS 6ft2 3" 15" 250psig 200°F 1",1.5";CMP,VCR®, BWT
TEM-400 75scfm(2124lpm) PTFE(TeflonTM) Polypro/Viton® 316L SS 2ft2 2.5" 7.5-8.6" 250psig 200°F 3/8",½",¾";CMP,NPT,VCR®, BWT
TEM-500 25scfm(708lpm) PTFE(TeflonTM) Polypro/Viton® 316L SS 1.2ft2 2.5" 5.0-6.2" 750psig 200°F 3/8",½";CMP,NPT,VCR®, BWT
TEM-800 10.6scfm(300lpm) PTFE(TeflonTM) Polypro/Viton® 316L SS 0.5ft2 2.0" 3.8-5.8" 750psig 200°F ¼", 3/8";CMP,VCR®,VCO
TEM-900 1.1scfm(30lpm) PTFE(TeflonTM) Polypro/Viton® 316L SS 3.1in2 1.0" 2.8-3.3" 3000psig 200°F ¼";CMP,VCR®,VCO
TEM-1100 300scfm(8495lpm) PTFE(TeflonTM) PTFE(TeflonTM) 316LSS 16.5ft2 3" 35" 250psig 350°F 1",1.5";CMP,VCR®, BWT
TEM-1200 200scfm(5663lpm) PTFE(TeflonTM) PTFE(TeflonTM) 316LSS 11ft2 3" 25" 250psig 350°F 1",1.5";CMP,VCR®, BWT
TEM-1300 125scfm(3540lpm) PTFE(TeflonTM) PTFE(TeflonTM) 316LSS 6ft2 3" 15" 250psig 350°F 1",1.5";CMP,VCR®, BWT
TEM-1400 75scfm(2124lpm) PTFE(TeflonTM) PTFE(TeflonTM) 316LSS 3ft2 3" 8.8-10.1" 750psig 350°F 3/8",½",¾";CMP,VCR®, BWT
TEM-1500 35scfm(991lpm) PTFE(TeflonTM) PTFE(TeflonTM) 316LSS 1.5ft2 3" 6.7-7.8" 750psig 350°F 3/8",½";CMP,VCR®, BWT
TEM-1800 10scfm(283lpm) PTFE(TeflonTM) PTFE(TeflonTM) 316LSS 0.5ft2 2.0" 5.0-6.2" 750psig 350°F ¼", 3/8";CMP,VCR®, BWT
TEM-1900 3.5scfm(100lpm) PTFE(TeflonTM) PTFE(TeflonTM) 316LSS 6.1in2 1.0" 4.8-5.3" 3000psig 350°F ¼", 3/8",½";CMP,VCR®, BWT
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Air filter with a hydrophobic filter membrane to act as a barrier to all contaminants.
Specifications
Filter Code8163
Materials of ManufactureFiltermedia: PTFE Housingmaterial: Polypropylene
Micron Rating0.2µm
DimensionsDiscdiameter: 15mm(0.59") Discwidth: 16mm(0.62")
ConnectorsFemaleluer/malesyringe
Maximum Operating Pressure5bar(72.5psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
MicrodiscTM 1PA15mmS-VentDiscFilters
Mic
rod
isc
™ 1
PA a
nd M
icro
dis
c™
2PA
Dis
c F
ilte
rsIn
-Lin
e a
nd
La
st C
ha
nc
e F
ilte
rs
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
112
Ordering Information: Fororderinginformationpleasegotopage188.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
113
Air filter with a hydrophobic filter membrane to act as a barrier to all contaminants.
Specifications
Filter Code8164
Materials of ManufactureFiltermedia: PTFE Housingmaterial: Polypropylene
Micron Rating0.2µm
DimensionsDiscdiameter: 25mm(0.98") Discwidth: 19mm(0.74")
ConnectorsFemaleluer/malesyringe
Maximum Operating Pressure5bar(72.5psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
MicrodiscTM 2PA25mmS-VentDiscFilters
IN-LINE AND LAST CHANCE FILTERS
Ordering Information: Fororderinginformationpleasegotopage188.
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
A filter of superior quality and design, the 33mm in-line disc filter is manufactured to the highest specifications for the super-wide format graphics market.
Thisinkjetspecificself-containedunitisdesignedaround an all Acetal or construction and is available instandardwhitehousing,orblackhousingforUVapplications.
Ultrasonically welded with no binding agents for low extractables,thefilterensurescompletecompatibilitywithinkjetsolvents.Theinnermeshensuresprecisefilterspecificationtotherequiredabsolutemicronrating.
Specifications
Filter Code8159
Materials of ManufactureFiltermedia: Stainlesssteelmesh Housingmaterial: Acetal Housingcolour: Whiteorblack
Micron Rating5µm,10µm,20µm,50µm
DimensionsDiscdiameter: 33mm(1.3”) Discwidth: 8mm(0.31”) Overallwidth: Connectordependant
Filter Area12.5cm2 (1.94in2)
ConnectorsJaco®: 3mmJaco® Luer: Femaleluer
Maximum Operating Pressure5bar(72.5psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
MicrodiscTM 3PS33mmPolymericIn-Line Disc Filters
Mic
rod
isc
™ 3
PS a
nd M
icro
dis
c™
4PS
Dis
c F
ilte
rsIn
-Lin
e a
nd
La
st C
ha
nc
e F
ilte
rs
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
114
Ordering Information: Fororderinginformationpleasegotopage188.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
115
A filter of superior quality and design, the 45mm in-line disc filter is manufactured to the highest specifications for the super-wide format graphics market.
Ultrasonically welded with no binding agents for low extractables,thefilterensurescompletecompatibilitywithinkjetsolvents.Theinnermeshensuresprecisefilterspecificationtotherequiredabsolutemicronrating.
Specifications
Filter Code8111
Materials of ManufactureFiltermedia: Stainlesssteelmesh Housingmaterial: Acetal Housingcolour: Whiteorblack
Micron Rating5µm,10µm,20µm,50µm
Dimensions Discdiameter: 45mm(1.77") Discwidth: 9mm(0.35") Overallwidth: Connectordependant
Filter Area12.5cm2 (1.94in2)
ConnectorsLuer and CPC
Maximum Operating Pressure5bar(72.5psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
MicrodiscTM 4PS45mmPolymericStandardDisc Filters
IN-LINE AND LAST CHANCE FILTERS
Ordering Information: Fororderinginformationpleasegotopage188.
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Inprinta’s black acetal pre-pump filter is manufactured specifically for use with Digital Inkjet equipment.
Thehighgradematerialsgivegoodflowratesandcompletechemicalcompatibilityunderallrequiredconditions for extended life span.
Specifications
Filter Code8074
Materials of ManufactureFiltermedia: Stainlesssteelmesh Housingmaterial: Acetal
Micron Rating5µm,10µm,15µm,20µm,50µm,
Dimensions Discdiameter: 45mm(1.77") Discwidth: 37mm(1.46")
Filter Area12.5cm2 (1.94in2)
Connectors¼"Jaco®and6mmJaco®
Maximum Operating Pressure5bar(72.5psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
MicrodiscTM 4PV45mmPolymericVolume Disc Filters
Mic
rod
isc
™ 4
PV a
nd M
icro
dis
c™
7PS
Dis
c F
ilte
rsIn
-Lin
e a
nd
La
st C
ha
nc
e F
ilte
rs
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
116
Ordering Information: Fororderinginformationpleasegotopage189.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
117
Inprinta’s MicrodiscTM 7PS is a large over-moulded polypropylene disc filter that gives excellent flow rates.
The MicrodiscTM7PSalsoensurescompletechemicalcompatibilityforallUVandsolventinkjetapplications.
Specifications
Filter Code8169
Materials of ManufactureFiltermedia: Polypropylene Housingmaterial: Polypropylene Housingcolour: Opaqueblackandnatural.
Micron Rating5µm,10µm,20µm,50µm
DimensionsDiscdiameter: 74mm(2.91") Discwidth: 47mm(1.85")
Filter Area19cm2 (2.95in2)
Connectors¼" Jaco®and6mmJaco®
Maximum Operating Pressure6bar(87psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
MicrodiscTM 7PS74mmPolymericDiscFilters
IN-LINE AND LAST CHANCE FILTERS
Ordering Information: Fororderinginformationpleasegotopage189.
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
A fully integrated polypropylene filter media precision manufactured into a polypropylene housing.
Thisin-linefilterhasexcellentchemicalcompatibilitytoinkjetfluids.Thehighefficiencyfiltersgivelongservicelifeandarebondedforminimalextractables.
Specifications
Filter Code8166/8065
Materials of ManufactureFiltermedia: Polypropylene Housingmaterial: Polypropylene
Micron Rating5µm,10µm
DimensionsFilterlength: 61mm(2.4") Filterwidth: 11mm(0.43")
ConnectorsBarb
Maximum Operating Pressure6bar(87psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
Bullet Filters5-10µm
Bulle
t and
In-L
ine
Filt
ers
In-L
ine
an
d L
ast
Ch
an
ce
Filt
ers
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
118
Ordering Information: Fororderinginformationpleasegotopage189.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
119
This filter is an inkjet in-line filter manufactured from PEEK material and a stainless steel mesh.
Thesematerialsmakeitasuperiorproductwithextendedlifeinyourinkjetprinter.
Specifications
Filter Code8098
Materials of ManufactureFiltermedia: Stainlesssteelmesh Housingmaterial: PEEK HousingColour: Opaqueblackornatural
Micron Rating3µm,5µm
DimensionsFilterlength: 44mm(1.73") Filterwidth: 15mm(0.59")
Filter Area3.5cm2 (0.54in2)
Connectors3mmJaco®
Maximum Operating Pressure6bar(87psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
In-Line Filters PEEK
IN-LINE AND LAST CHANCE FILTERS
Ordering Information: Fororderinginformationpleasegotopage189.
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
In-L
ine
UV
and
La
st C
hanc
e In
kje
t Filt
ers
In-L
ine
an
d L
ast
Ch
an
ce
Filt
ers
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
120
Inprinta’s in-line UV filter is designed to meet all inkjet requirements.
ManufacturedinPEEK,thisfiltergivesexcellentfilterintegrityandis100%compatiblewithinkjetfluids.
Specifications
Filter Code8091
Materials of ManufactureFiltermedia: Stainlesssteel Housingmaterial: PEEK
Micron Rating3µm,5µm,10µm
DimensionsFilterlength: 47mm(1.85") Filterwidth: 15mm(0.59")
Filter Area3.5cm2 (0.54in2)
Connectors3mmJaco®
Maximum Operating Pressure3bar(43.5psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
In-Line UV FiltersPEEK
Ordering Information: Fororderinginformationpleasegotopage189.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
121
IN-LINE AND LAST CHANCE FILTERS
This filter is manufactured in black acetal and designed to be used on inkjet equipment in conjunction with an Inprinta main (capsule) filter.
Situatedclosetotheprinthead,thisfilterisdesignedtocaptureanyparticlesbeforedamagecanbecausedtotheprinthead.Thisfilteris100%chemicallycompatibletoallinkjetfluidsgivinganextendedlifespan.
Specifications
Filter Code8087
Materials of ManufactureFiltermedia: Stainlesssteelmesh Housingmaterial: Acetal
Micron Rating3µm,5µm,50µm
Dimensions Filterlength: 21mm(0.83") Filterwidth: 8mm(0.31")
Filter Area 12cm2 (1.86in2)
Connectors2.6mmbarb
Maximum Operating Pressure1bar(14.5psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
Last Chance Inkjet Filters
Ordering Information: Fororderinginformationpleasegotopage189.
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
123
Inprinta is the Inkjet sales division of Porvair Filtration Group, supplying quality inkjet filtration assemblies. Inprinta’s filters are designed and manufactured in the UK for the digital printing market, with specialist applications in capsule filters.
Thismainsystemfilterisspecificallydesignedfortherequirementofdigitalinkjetprinterfiltration.The self contained unit is designed around an all-polypropylene construction with no binding agents, to givelowextractablesandensure100%compatibilitywithinkjetfluids.Allcapsulefiltersareavailableforstandardsolvent,aqueousandUVinksystems.
• Capsulefiltersarepressuretestedtoguaranteecapsule integrity.
• AllfilterhousingishighgradePolypropylene.
• AnintegratedVyon® core gives added security.
• Operatingtemperaturefrom0°Cto50°C(32ºFto122ºF).
• 6bar(87psi)operatingpressure.
Inprinta capsules are self contained, ready to use, disposabledevices.Thefilterbodyisconstructedwithnaturaloropaqueblackhousingandavailablewithawiderangeofconnectorconfigurationstosuitdifferentsystems.Allcapsuleswillprovideconsistent,reliableprintingperformancewithmaximisedprintheadprotection.
123
Disposable Capsule FiltersforInkjetFiltration
This main system filter is specifically designed for the requirement of graphics printer filtration.
Theinkjetspecific,self-containedunitisdesignedaround an all polypropylene construction with no binding agents, to give low extractables and ensure 100%compatibilitywithinkjetfluids.
AvailableforstandardorUVinks,thisunitalsohasawiderangeofconnectorsandfilterratings.
Specifications
Filter Code8089
Materials of ManufactureFiltermedia: Polypropylene Housingmaterial: Polypropylene Housingcolour: Opaqueblackandnatural
Micron Rating0.5µm,1µm,3µm,5µm,10µm,20µm,40µmand60µm(additionalratingsareavailableonrequest).
DimensionsFilterdiameter: 65mm(2.56") Filterheight: 88mm(3.46")(plusconnectors)
Filter Area500cm2 (77.5in2)
ConnectorsBarb: ¼”barb NPT: ¼”NPTmale Jaco®: ¼”Jaco® ¼”Jaco®90º 6mmJaco®90º 6mmJaco® CPC: CPC Luer: Luer Luer90º
Maximum Operating Pressure6bar(87psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
Flow Rate
MicrocapTM MainSystemCapsuleFilters
Mic
roc
ap
™ a
nd M
icro
prin
t™ C
ap
sule
Filt
ers
Disp
osableCapsuleFiltersfo
rInkjetFiltration
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
124
24
12
9
0200 600 800 1000
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Flow (ml/min)
0 400
15
21
18
6
3
0.13
0.35
0.30
0.26
0.22
0.17
0.09
0.04
0
Pre
ssur
e (
psi)
10µm
5µm
3µm
1µm
20µm
24
12
9
0200 600 800 1000
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Flow (ml/min)
0 400
15
21
18
6
3
0.13
0.35
0.30
0.26
0.22
0.17
0.09
0.04
0
Pre
ssur
e (
psi)
10µm
5µm
3µm
1µm
20µm
Ordering Information: Fororderinginformationpleasegotopage190.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
The MicroprintTM main system filter is specifically designed for the requirement of printer filtration.
Thisinkjetspecificself-containedunitisdesignedaround an all polypropylene construction with no binding agents, to give low extractables and ensure completecompatibilitywithvolatileinkjetbasedsolvents.
Easeoffittingandextendedfilterlifespanallowformaximumup-time.
Specifications
Filter Code8096
Materials of ManufactureFiltermedia: Polypropylene Housingmaterial: Polypropylene Housingcolour: Opaqueblackandnatural
Micron Rating0.5µm,1µm,3µm,5µm,10µm,20µm,40µmand60µm(additionalratingsavailableonrequest)
DimensionsFilterdiameter: 77mm(3.02”) Filterheight: 47mm(1.85”)(plusconnectors)
Filter Area500cm2 (77.5in2)
ConnectorsJaco: ¼”Jaco® 6mmJaco® CPC: CPC
Maximum Operating Pressure<6.5bar(94psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
Flow Rate
MicroprintTM Capsule Filters
125
DISPOSABLE CAPSULE FILTERS
24
12
9
0200 600 800 1000
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Flow (ml/min)
0 400
15
21
18
6
3
0.13
0.35
0.30
0.26
0.22
0.17
0.09
0.04
0
Pre
ssur
e (
psi)
10µm
5µm
3µm
1µm
20µm
24
12
9
0200 600 800 1000
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Flow (ml/min)
0 400
15
21
18
6
3
0.13
0.35
0.30
0.26
0.22
0.17
0.09
0.04
0
Pre
ssur
e (
psi)
10µm
5µm
3µm
1µm
20µm
Ordering Information: Fororderinginformationpleasegotopage190.
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Mic
roje
t™ M
ain
Sys
tem
Filt
ers
Disp
osableCapsuleFiltersfo
rInkjetFiltration
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
126
This main system filter is specifically designed for the requirement of the wide and superwide format graphics printer market.
Theinkjetspecificself-containedunitisdesignedaround an all polypropylene construction, with no binding agents, to give low extractables and ensure 100%compatibilitywithinkjetfluids.ThesefiltersaresuitableforsolventorUVinksystems.
Specifications
Filter Code8131
Materials of ManufactureFiltermedia: Polypropylene Housingmaterial: Polypropylene Housingcolour: Opaqueblackandnatural
Micron Rating5µm,10µm
DimensionsFilterlength: 100mm(3.94”)(plusconnectors) Filterwidth: 27mm(1.06”)
Filter Area500cm2 (77.5in2)
ConnectorsLuer/hosebarb
Maximum Operating Pressure6bar(87psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
MicrojetTM MainSystemFilters
Ordering Information: Fororderinginformationpleasegotopage191.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
127
DISPOSABLE CAPSULE FILTERS
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
129
Porvair Filtration Group manufacture a range of media and materials for fluidisation and powder handling units.
ThethreetypesofmaterialsthatareidealfortheseapplicationsareSinterflo®Psinteredmetalpowder,Sinterflo®MporoussinteredmeshandVyon® sintered porous plastic.
Thesematerialsareextremelystrongandfreestandingandcanbefabricatedintoshapesascomplexasfluidisingconesforuseinsilos,forexample.
ThematerialtechnologiesthatPorvair can bring to powder handling represents one of the largest selectionscurrentlyavailablefromanysinglemanufacturer.
129
Fluidisation and Powder Handling Units
For applications requiring localised fluidisation and aeration or for retrofitting into existing silos or hoppers, the Sinterflo® P aeration units can offer a simple ready-made solution to powder handling problems.
Fluidisationistheintroductionofacompressedgas,viaporousmedia,intoabulkpowder,toenablethepowdertobehavelikealiquidforeaseofmovement.
Ingeneral,thesmallerthepowderparticlesize,themorecohesiveitbecomesandthemoredifficultitistomove.WithPorvair’s extensiverangeoffluidisingmedia,wecantailoroptimalsolutionstosolvemostfluidisationchallenges.
Availableinvarioussizes,Sinterflo® units introduce low pressurefluidisingairintothematerialatorbeforeitspointofexitormovement.
Typical Applications
Sinterflo®Psinteredmetalpowderaerationpadscan be used where tolerance of high operating temperaturesofupto600ºC(1,112ºF)andhighcorrosion resistance is required.
• Localisedfluidisation
• Silo construction
• Gypsumandflyashaerationordrying
Features and Benefits
• High operating temperatures Upto600ºC(1,112ºF).
• High corrosion resistance
• Easy installation Aerationpadscompletewithcompressedairsupply adapter with BSP thread.
• Multiple sizes available Idealforretrofittingintoexistinghoppersorsilosthathavefailedtoperformeffectively.
Sinterflo® P Metal Powder Aeration Units for Powder Handling
130
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Sint
erfl
o® P
Me
tal P
ow
de
r Ae
ratio
n U
nits
Flu
idisa
tion
an
d P
ow
de
r Ha
nd
ling
Un
its
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Wrexham Division US, Ashland Division Tel:+44(0)1978661144 Tel:+18045501600 Email:[email protected] Email:[email protected]
131
Sinterflo® P Stainless Steel Aeration Unit
StainlesssteelSinterflo®unitshavebeenspecificallydesignedforuseinthefoodandpharmaceuticalindustriesandwhereresistancetochemicalattackorhightemperature(upto600ºC(1,112ºF))isrequired.
Sinterflo® P Bronze Aeration Unit
Availableassheetsupto600mm(23.62”)longand350mm(13.78”)wideorasafinishedunitasillustratedbelow,theSinterflo®Bronzesheetandaerationunitexhibits excellent strength and rigidity, and can be usedinhighertemperatureapplications(upto300ºC(572ºF))suchasconveyorsandairslidesforhotflyashandgypsumpowders.
FLUIDISATION AND POWDER HANDLING UNITS
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Sinterflo® MC Fluidising Media, multi-layered, diffusion-bonded stainless steel mesh is available in 316L and other alloys. This precision fluidising media is available in both Lo Flow and Hi Flow rates, to meet your application requirements.
Usuallyavailableinstock,forimmediatedelivery,themediaissuppliedasflat-panels,uptoaseamlesssizeof100cmx150cm(40”x60”),andinanunlimitedsizein butt-welded sheets.
Porvair Filtration Groupprovidecompletefabricationservicesforthismaterial,includingcustomsizes,shapes,mountingholesandweldingtoendfittingsorrings.Wecanalsofabricateintotubesorfluidisationconesforhopperbottoms.
Forfluidisingapplicationswhereatightlycontrolledefficiencyratingisrequired,Porvair Filtration Group canprovideaprecisionfinefiltermesh(downto2micronsnominal)sinteredtothefluidisingmedia.Thisis particularly useful in reducing particulate bypass, cloggingandwhenfluidisinggasisnotflowingconstantly.
Sinterflo®MCfluidisingmediaisparticularlysuitedtodemandingapplicationswherehighoperatingtemperaturesofupto540ºC(1,000ºF),increasedchemicalorhighabrasionresistanceisessential,suchassilodischargecones,fluidisedreactorsandfluidiseddryers.
Thismaterialiseasilycustomengineeredtomeetrequiredspecificationsofmaterials,strength,flowrequirements,thickness,micronratingandenvironment.
Typical Applications
• Fluidising beds
• Fluidised gravity conveyors
• Fluidised hoppers
• Gas spargers
Features and Benefits
• High operating temperatures
• Robust and self supporting
Fabricated shapes usually do not require complexandexpensivesupportstructuresor joiningstrips.
• Application and material versatility
• Enhanced chemical resistance
Canbeconstructedfromawiderangeof materialsincluding304and316Lstainlesssteel, Hastelloy®, Inconel® and Monel®.
• Cleanability
Awiderangeofcleaningmethodscanbeused; asaresultthemediacanbesterilizedforuse withinthefoodandpharmaceuticalindustries.
• Abrasion resistance
Non-sheddingmedia,highlyresistantto mechanicalabrasion.
• Design and engineering versatility
Easilycustomengineeredtomeet requiredspecificationsofmaterials,strength, flowrequirements,thickness,micronratingand environment.
Sinterflo® MC Fluidising Media for Powder Handling
132
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Sint
erfl
o® M
C F
luid
isin
g M
ed
iaFl
uid
isatio
n a
nd
Po
wd
er H
an
dlin
g U
nits
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Wrexham Division US, Ashland Division Tel:+44(0)1978661144 Tel:+18045501600 Email:[email protected] Email:[email protected]
133
Typical Applications
Fluidised BedsIn this application air ispumpedthroughahorizontalorinclinedsectionofSinterflo® MCmediatherebylevitating a wide rangeofmaterialssuchasflour,cement,orpaintparticles.Theairinthisapplication can also be used for drying the product or insomecasesimpartingadditives.
Fluidised Gravity Conveyors In this application asecondflowofair is introduced at a 90 degree angle tothefluidisingmediatomovetheproduct forward for secondaryprocessing(i.e.roasting)ortransportation.
Fluidized HoppersWhenformedinto conical shapes Sinterflo®MCmediawill prevent ‘bridging’ ofparticles/powdersand increase the speed of discharge. This is especially critical in the unloading of railcars.
Gas Spargers Whensubmergedinaliquidenvironmentthe air passed through Sinterflo®MCmediawillcreateafinebubblefieldthataidsmoreefficientoxygenation.Thisprocessisusedintheelectro-plating,fermentationandwatertreatmentindustries.
Specifications
2
1
Diff
ere
ntia
l Pre
ssur
e (
inc
he
s o
f H20
)
SCFM/ft2
3
45
10
20
30
4050
100
50000 10050105 500 1000
360206-400
360206-200
360102-50
360102-25
360206-999
360206-600
360102-10
360102-4
Hi FlowLo Flow
FSLA-10
FSLA-4
FSLA-50
FSLA-25
FSHA-400
FSHA-200
FSHA-999
FSHA-600
FLUIDISATION AND POWDER HANDLING UNITS
Grade Airflow Nominal Thickness (SCFM/ft2@2inofH20) mm(in)
Grade Airflow Nominal Thickness (SCFM/ft2@6inofH20) mm(in)
FSLA Standard Lo Flow Fluidizing Media Grades
FSHA Standard Hi Flow Fluidizing Media Grades
FSLA-0005 5 1.37mm(0.054")
FSLA-0010 10 1.47mm(0.058")
FSLA-0025 25 1.57mm(0.062")
FSLA-0050 50 1.65mm(0.065")
FSHA-0200 200 1.02mm(0.040")
FSHA-0400 400 1.19mm(0.047")
FSHA-0600 600 1.32mm(0.052")
FSHA-1000 1000 1.63mm(0.064")
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Our Vyon® porous media is manufactured from USP Class VI approved HDPE or PP materials, making it particularly suitable for both food and pharmaceutical applications. It has a uniform pore structure giving an even total area fluidisation. It is self-supporting due to its semi-rigid nature, thereby reducing the need for the external support structures that are required with canvas and felt media.
Thismaterialcanbesuppliedasareadyfabricatedfluidisingconelinerorinflatsheetform,1000mmx750mm(40”x30”),foruseasatanklinerorinanenduser secondary fabrication.
Vyon®porouspolymersarethemosteconomicalchoicewheretemperaturesareintherangeof-70°Cto80°C(-94°Fto176°F).
Vyon®isfullycleanableformultiplere-uses,however,itsaffordabilitycomparedtostainlesssteelmaypermitmorefrequentreplacementwhereadisposalfabrication is preferred to cleaning.
Typical Applications
Food and pharmaceutical • Sugar
• Flour
• Milkpowder
• Paracetamol
• Vitamins
Industrial and construction • Cement
• Gypsum
• Soda/flyash
• Coal dust
Chemical and plastics • Titaniumdioxide
• Carbonblack
• Calciumcarbonate
• Polyethylene powder
• Epoxy and polyester paint powders
Features and Benefits
• Light weight and self supporting.
• Evenairflow.
• Nonfibreshedding.
• Low extractables.
• Naturally hydrophobic.
• Chemicallyinert.
• Material versatility.
• Easy to clean.
Vyon® Porous Polymer Fluidising Media for Powder Handling
134
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Vyo
n® P
oro
us P
oly
me
r Flu
idis
ing
Me
dia
Flu
idisa
tion
an
d P
ow
de
r Ha
nd
ling
Un
its
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Wrexham Division US, Ashland Division Tel:+44(0)1978661144 Tel:+18045501600 Email:[email protected] Email:[email protected]
135
Specifications
Mean Pore Size12-16µm
Air Flow at 10mbar2-3m3/min/m2 (71ft3/min/ft2)
Removal Efficiency (Air)6µm
Elongation at Break10%
Tensile Strength70kgf/cm2(12.8lbf-ft)
Temperature Range*-70°Cto110°C*(-92°Fto230°F)
* Depending on material type
FLUIDISATION AND POWDER HANDLING UNITS
Solidsdischarge
Fluidisedarea
Solidsdischarge
Fluidised powdercompartment
Air compartment
Plenumarea
Air
Air
Air
Plenumchamber
Fluidbed
Air
Plenumchamber
Typical Applications
Gravity discharge
Solidsdischarge
Fluidisedarea
Solidsdischarge
Fluidised powdercompartment
Air compartment
Plenumarea
Air
Air
Air
Plenumchamber
Fluidbed
Air
Plenumchamber
Solidsdischarge
Fluidisedarea
Solidsdischarge
Fluidised powdercompartment
Air compartment
Plenumarea
Air
Air
Air
Plenumchamber
Fluidbed
Air
Plenumchamber
Anti-bridging and aeration pads
Air assisted gravity conveying
Solidsdischarge
Fluidisedarea
Solidsdischarge
Fluidised powdercompartment
Air compartment
Plenumarea
Air
Air
Air
Plenumchamber
Fluidbed
Air
Plenumchamber
Dip coating
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
137
Porvair Filtration Group manufacture a range of flow and sound control units for the process industries. Using both metallic and polymeric materials, Porvair’s flow and sound control units are suitable for air, gas, liquid and silencing applications.
Many specialised applications have been developed totakeadvantageoftheuniquecharacteristicsofporousmaterials.Applicationssuchasfiltration,flowcontrol,flamearrestorsandself-lubricatingbearingsaresomeofthelargestcommercialapplications.
Porvair’s porous technology offers a cost-effective solution to diverse engineering challenges in the industrialmarketplace.
Porvair’srangeofflowcontrolunitspresenttheapplicationwithmultiplebenefits,including:highcorrosionresistance,applicationandmaterialversatility, abrasion resistance and design and engineeringflexibility.
137
Flow and Sound Control
Sinterflo® MC multi-layered, diffusion-bonded, stainless steel mesh is available in 316L and other alloys. This precision filter mesh, also known as a porous plate, is available in a range of different pore sizes ranging from 2 to 100 micron in diameter.
Porvair Filtration GroupfabricateSinterflo® MC sintered meshinastandardflatplateformat,uptoaseamlesssizeof1,000mmx1,500mm(40”x60”)andanunlimitedsizeinbutt-weldedsheets.
Thismaterialiseasilycustomengineeredfornon-standardapplicationsandcanbeformedintotubesandsmalldiscsorlargescalecircularplates.
Sinterflo® MC Filter Plates are particularly well suited todemandingapplicationswherehighoperatingtemperaturesupto540ºC(1,000ºF),increasedchemicalresistanceand/orhighabrasionresistanceisessential.Theseapplicationsincludeflamearrestors,nutschefilterplatesandpolymermeltfilters.
Typical Applications
• Wellwaterfiltrationforcropirrigation
• Sandfiltrationinoffshoreoilandgasrecovery
• Seawaterfiltrationindesalinationplants
• Marinelifefiltrationfromballastwater
Features and Benefits
• Highoperatingtemperatures.
• Robust and self supporting.
• Applicationandmaterialversatility.
• Enhancedchemicalresistance.
• Cleanability.
• Abrasion resistance.
• Design and engineering versatility.
Sinterflo® MC Filter PlatesMetalCompositeFilterPlates
Sint
erfl
o® M
C M
eta
l Co
mp
osi
te F
ilte
r Pla
tes
Flo
w a
nd
So
un
d C
on
tro
l
138
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Wrexham Division US, Ashland Division Tel:+44(0)1978661144 Tel:+18045501600 Email:[email protected] Email:[email protected]
139
FLOW AND SOUND CONTROL
Specifications
Sinterflo® MC Filter Plate Configuration
Protective Guard Layer
Filtration Layer
Distribution Layer
Support Layer
Support Layer
1
2
3
4
5
2 3 4 51
Grade Nominal Partical Control Nominal Rating Mesh Thickness (microns) (wires per inch) (inch(mm))
PSA-0005 5 325 x 2300 0.066"(1.68mm)
PSA-0010 10 200 x 1400 0.066"(1.68mm)
PSA-0015 15 165 x 1400 0.066"(1.68mm)
PSA-0020 20 165 x 800 0.069"(1.75mm)
PSA-0040 40 325 x 325 0.073"(1.85mm)
PSA-0075 75 250 x 250 0.074"(1.88mm)
PSA-0100 100 150 x 150 0.074"(1.88mm)
Standard Filter Plate Grades
Flow Versus Pressure Drop
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
140
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ga
sPro
TM R
est
rictiv
e F
low
Pro
duc
ts a
nd F
low
Re
stric
tors
Flo
w a
nd
So
un
d C
on
tro
l
Restrictive Flow Products (RFP) are restrictive flow orifices with a single opening or sintered metal flow restrictors with hundreds of small, micron sized passageways. These are flow limiting devices used to prevent an uncontrolled flow of high purity semiconductor process gases.
Flowlimitingdevicesareinstalledincompressedgassupplysystems,oringasdistributionmanifolds,tocontrolahighgasflowspike.Unintentionalhighgasflowmaybecausedbytheruptureofagassupplyline,amalfunctioningvalveorthefailureofapressureregulator.
Our GasProTMSinterflo® P Sintered Metal Flow Restrictors arehighlyreliable,lowcost,flowcontrolpartsthatwillprovideaquickreturn.
Typical Applications
• Improved gas safety management RFP’sarein-linedevicesthatpreciselylimitthegasflowincaseofcatastrophicfailureofavalve,pressureregulator,distributionmanifoldor gas supply line. They can be used in a wide range of inert, highly toxic and pyrophoric gases toreducethehandlingrisk.
• Cost reduction of exhaust venting systems ToxicgasdeliverysystemswithRFP’sinstalledcanbedesignedwithsmaller,lowerflowexhaustsystemsand,therefore,savesignificantcapitalinvestment.
• Tamper proof flow control Forprovidingfixedflowwithouttherequirementofadjustments,movingpartsorpower.Withhundredsofsmallflowchannels,ourGasProTMSinterflo®PSinteredMetalFlowRestrictorswillresistcloggingfromparticlesinthegassupply.
• Replacement of needle valves and mass flow controllers Forfixedpressure,steadyflowgasdeliveryandflowsplittingapplications.
• Laminar flow diffusers Forlowvelocitygaspressurizationorventingofvacuumchambers.
• Pressure snubbers For the prevention of pressure surges and pressureshock.
• Flame arrestors Forcreatingabarriertoflamestravellinginacombustiblegasservice.Canbecertifiedbyindependent lab testing.
GasPro™ Restrictive Flow Products and Sintered Metal Flow Restrictors
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team. Visit us online for current and comprehensive GasProTM Restrictive Flow Products and Sinterflo® P Sintered Metal Powder Flow Restrictors information.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
141
FLOW AND SOUND CONTROL
Features and Benefits
• Semiconductor industry, building and fire code compliance RFP’scanassistincomplyingwithSEMIS5-0310SafetyGuidelinesforsizingandidentifyingflowlimitingdevicesforgascylindervalves,NFPA318StandardforProtectionofSemiconductorFabrication Facilities, CGA G-13 Storage and Handling of Silane and other gas safety standards.
• Porous materials of construction 316Lstainlesssteel,nickel,Hastelloy® C22, Hastelloy® C276andothertemperatureandcorrosionresistantmaterials.
• Fitting connections 10Raorbetter,electropolishedhardwaremadefrom316LstainlesssteelVAR,nickel,Hastelloy® C22, Hastelloy®C276andothertemperatureandcorrosionresistantmaterials.
• Flow range 1to60,000sccmN2@30psigequivalent,calibratedto+/-7.5%flowtolerancetypically,butcanbeofferedaslowas+/-1%onrequest.Standardproductscanbeusedinafullvacuumandinpressuresupto150psig.Customdesignedproductscanbemanufacturedtowithstandpressuresupto3000psig.
Product Selection
• Test gases Cleandryair,nitrogen,hydrogen,helium,argonand CO2arecommonlyused.OthergasessuchasAsH3, Br2, BF3, CCl4, C2H2, CH4, Cl2, NF3, NH3, PH3, SF6 and SiH4canbecorrelatedtoanequivalentN2flowusing viscosity conversions.
• Class 100 cleanroom processing Particlefree,chemicallyclean,organicfreehandlingandbaggingofRFP’sforout-of-packagecleanliness. No particle shedding and dried to less than10ppbmoisture.Organicslessthan10ppbTHCandheliumleakcheckedtogreaterthan 1x10-9sccm/second.
• Manufactured in the USA Porvair Filtration Group’srestrictiveflowproductsaremanufacturedintheUSAusinganIS09001certifiedqualitysystem.
Part Fitting Porous Porous Main OALor Porous VCR® Fitting Flow Flow Gas Gas Inlet Gas Outlet Number Type Outside Thickness* Fitting* Thickness* Material orGasket Rate Tolerance Type Pressure Pressure Diameter* Material (sccm) (psig) (psig)
7110G-N2-30 ¼"Gasket 0.217" 0.060" 0.470"OD 0.022" 316LSS 316LSS 10 +/-20% Nitrogen 30 0
71500G-HE-30ST ¼"Gasket 0.217" 0.060" 0.470"OD 0.022" 316LSS 316LSS 500 +/-2% Helium 30 0
71500G-HE-30 ¼"Gasket 0.217" 0.060" 0.470"OD 0.022" 316LSS 316LSS 500 +/-7.5% Helium 30 0
721000G-N2-30 ¼"Gasket 0.217" 0.060" 0.470"OD 0.022" HC22 HC22 1000 +/-7.5% Nitrogen 30 0
7130000G-N2-30 ¼"Gasket 0.217" 0.060" 0.470"OD 0.022" 316LSS 316LSS 30000 +/-7.5% Nitrogen 30 0
7110-N2-30 In-line¼"VCR®0.180" 0.187" 0.625"Hex 1.55" 316LSS 316LSS 10 +/-20% Nitrogen 30 0
7125-AR-20 In-line¼"VCR®0.180" 0.187" 0.625"Hex 1.55" 316LSS 316LSS 25 +/-20% Argon 20 0
7150-N2-30 In-line¼"VCR®0.180" 0.187" 0.625"Hex 1.55" 316LSS 316LSS 50 +/-7.5% Nitrogen 30 0
72100-N2-30 In-line¼"VCR®0.180" 0.187" 0.625"Hex 1.55" HC22 HC22 100 +/-7.5% Nitrogen 30 0
71100-N2-90P In-line¼"VCR®0.180" 0.187" 0.625"Hex 1.55" 316LSS 316LSS 100 +/-7.5% Nitrogen 90 30
71100-CDA-60 In-line¼"VCR®0.180" 0.187" 0.625"Hex 1.55" 316LSS 316LSS 250 +/-7.5% Air 60 0
71100-N2-30 In-line¼"VCR®0.180" 0.187" 0.625"Hex 1.55" 316LSS 316LSS 500 +/-7.5% Nitrogen 90 0
71100-N2-0V In-line¼"VCR®0.180" 0.187" 0.625"Hex 1.55" 316LSS 316LSS 1000 +/-7.5% Nitrogen 0 Vacuum
715000-N2-30 In-line¼"VCR®0.180" 0.187" 0.625"Hex 1.55" 316LSS 316LSS 5000 +/-7.5% Nitrogen 30 0
7110000-N2-30 In-line¼"VCR®0.180" 0.187" 0.625"Hex 1.55" 316LSS 316LSS 10000 +/-7.5% Nitrogen 30 0
72100SC-N2-30 Surface‘C’ 0.187" 0.125" 1.5"Sq 0.25" HC22 HC22 100 +/-7.5% Nitrogen 30 0
715000SC-AR-30 Surface‘C’ 0.187" 0.125" 1.5"Sq 0.25" 316LSS 316LSS 5000 +/-7.5% Argon 30 0
7130000SC-N2-30 Surface‘C’ 0.187" 0.125" 1.5"Sq 0.25" 316LSS 316LSS 30000 +/-7.5% Nitrogen 30 0
* Measurements are +/-0.005".Note: The wetted surfaces of the VCR® type face seal gaskets, the VCR® fittings and surface mount adaptors are 10Ra minimum with an electopolished finish.
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
142
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ga
sPro
TM C
ham
be
r Qui
ck
Ve
nt D
iffus
er F
ilte
rsFl
ow
an
d S
ou
nd
Co
ntr
ol
Porvair GasProTM high purity gas diffuser and filter products for controlled, reduced turbulence, laminar gas flow when purging or venting load lock, transfer, cooling and vacuum chambers used in Microelectronics processing equipment.
GasProTMchamberquickventdiffuserfiltersallowlargevolumesofgastobepurgedintovacuumenvironments,whilstminimizingdisturbancetoparticleswithinthechamber.
Thesediffuserfilterscanberetrofittedintovacuumchambers,transferchambers,coolingchambers,processchambersandloadlockchambers.
ManufacturedinastateoftheartcleanroomusingISO9001CertifiedQualitySystem.ADIwaterflush,followedbyahighpressure,0.003µmfilterednitrogenflushremovesparticlesandpreventsparticleshedding.Theyarevacuumdriedtolessthan10ppbmoistureasneeded and the organics are less than 10ppb THC.
Allfiltersare100%heliumleakchecked,100%integritytested, cleaned and dried, then bagged in a Class 100 Cleanroomtoensurethehighestout-of-boxqualityand cleanliness.
Features and Benefits
• Faster venting and cost saving Reducespurgingandpressurizationtimewithoutdisruptingparticles,alsoactsasapoint-ofusefilter.
• Easy connection Usesstandardvacuumflanges,centeringringsorfacesealVCR®fittingstoconnecttoloadlockinterfacesandvacuumchambers.Aseparatehousing is not required.
• Wide range of filtration efficiency removal ratings 9Log(99.9999999%)particleretentionefficiencyat0.003,0.08,0.2,0.5,1,2,5,10or20micrometers.
• Dryness Vacuumovendriedtopptlevelsasneeded.
• Service in severe environments Excellentmechanicalstrengthfor100,000cyclesinhighpressureservice(4bar/60psid@68°F(20°C)),superiorcorrosionresistanceandcompatibilitywithawiderangeofprocessinggases.Allmetalconstructionforelevatedtemperatureresistanceforinertgasapplications.DiffuserswithViton®o-ringsrated for service at up to 212°F(100°C).
GasPro™ ChamberQuickVentDiffuser Filters
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team. Visit us online for current and comprehensive GasProTM Restrictive Flow Products and Sinterflo® P Sintered Metal Powder Flow Restrictors information.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
143
FLOW AND SOUND CONTROL
Specifications
Materials of ConstructionDiffuserfilter: 316Lstainlesssteel,
Hastelloy®C22ornickelsinteredpowdermetal
O-ringmaterial: Viton®
Removal Rating0.003µm,0.2µm,0.5µm,2µmand10µm
Product SelectionGasProTM Face Seal Filter Diffusers
GasProTMVacuumFlangeFilterDiffusers
GasProTM Centering Ring Diffusers
Downstream CleanlinessVolatiles(preconditionedoption) (moisture,oxygenand THC’seach): <10ppb
Quality AssuranceClass100CleanroommanufacturedinISO9001CertifiedQualitySystemfacility.
100% integrity tested.
100%heliumleaktestedto>1x10-9atmcc/second.
GasProTM FlowRating FilterRating* Filter Connection Diffuser Diffuser Diffuser PartNumber (@14.7psiginlet) Material OutsideDiameter Length Overall Length
8110-FS4-003 10slpm 0.003µm 316L Stainless Steel ¼"VCR® 0.50"(12.7mm) 1.50"(38.1mm) 2.39"(60.7mm)
8320-FS4-003 20slpm 0.003µm Nickel ¼"VCR® 0.50"(12.7mm) 0.75"(19.1mm) 1.64"(41.6mm)
8340-FS4-003 40slpm 0.003µm Nickel ¼"VCR® 0.50"(12.7mm) 1.50"(38.1mm) 2.39"(60.7mm)
8375-FS8-003 75slpm 0.003µm Nickel ½"VCR® 0.50"(12.7mm) 3.00"(76.2mm) 3.89"(98.8mm)
83250-FS8-003 250slpm 0.003µm Nickel ½"VCR® 1.00"(25.4mm) 3.00"(76.2mm) 4.06"(103.1mm)
GasProTM FlowRating FilterRating* Filter Connection Diffuser Diffuser Diffuser PartNumber (@14.7psiginlet) Material OutsideDiameter Length Overall Length
8360-VF16-003 60slpm 0.003µm Nickel NW16/¼"VCR® 0.64"(16.2mm) 1.75"(44.4mm) 3.19"(61.0mm)
8360-VF25-003 60slpm 0.003µm Nickel NW25/¼"VCR® 0.64"(16.2mm) 1.75"(44.4mm) 3.19"(81.0mm)
8390-VF25-003 90slpm 0.003µm Nickel NW25/¼"VCR® 0.64"(16.2mm) 2.64"(67.1mm) 4.08"(103.6mm)
8390-VF40-003 90slpm 0.003µm Nickel NW40/¼"VCR® 0.64"(16.2mm) 2.64"(67.1mm) 4.08"(103.6mm)
83250-VF40-003 250slpm 0.003µm Nickel NW40/¼"VCR® 1.00"(25.4mm) 3.00"(76.2mm) 4.06"(103.1mm)
GasProTM Flow Rating Filter Rating Filter Connection Diffuser Diffuser PartNumber (@14.7psiginlet) Material OutsideDiameter Thickness
8102-CR16-02 2slpm 0.2µm 316L Stainless Steel NW16 0.67"(16.0mm) 0.039"(1.0mm)
8112-CR25-05 12slpm 0.5µm 316L Stainless Steel NW25 1.02"(25.9mm) 0.062"(1.57mm)
8175-CR25-2 75slpm 2µm 316L Stainless Steel NW25 1.02"(25.9mm) 0.062"(1.57mm)
81190-CR40-2 190slpm 2µm 316L Stainless Steel NW40 1.61"(40.9mm) 0.062"(1.57mm)
81300-CR50-10 300slpm 10µm 316L Stainless Steel NW50 2.05"(52.1mm) 0.062"(1.57mm)
* 9 Log filtration efficiency removal rating for 0.003µm particles at rated flow, verified by independent lab testing at the most penetrating particle size of 0.08µm. Filter is made from porous Sinterflo® P sintered metal powder.
Standard product combinations are shown in the tables above, please contact a Porvair Filtration Group representative for our full product range.
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Battery Vents and Flame Arrestorsfor Process and Analytical InstrumentApplications
144
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Sint
erfl
o P
Po
rous
Po
wd
er C
ylin
de
rsFl
ow
an
d S
ou
nd
Co
ntr
ol
Porvair Filtration Group manufacture a wide range of flame arrestors from sintered metal powder and porous plastics.
Porvair’ssinteredmetalflamearrestorsareusedinmanyprocessinstrumentandanalyticalinstrumentapplications as safety devices for handling combustiblegasesforgasanalysers.
Thehighthermalconductivityoftheseflamearrestorcoolstheflamefrontorcombustionwavebyabsorbinganddissipatingtheheatoftheflame.
Porvair Sintered Metal Flame ArrestorsPorvair sinteredmetalpowderflamearrestorscomplywiththeATEXDirectiveandtheassociatedInternationalStandardsOrganization(ISO)testingguidelines:
• ISO4003ÆDeterminationofBubblePointPore SizeinPorousSinteredMetal.
• ISO4022ÆDeterminationofPermeability.
• ISO2738ÆDeterminationofDensityinPorous Materials.
Porvair Porous Plastic Battery VentsPorvair Filtration Group’s Porvent porous plastic batteryventsaremanufacturedfromVyon®, in either polyethyleneorpolypropylene.Theycanbeusedfor:flamearresting,separationandoptimumventing.
Porvair’sflamearrestorscanbemadeintothefollowingformats:
• Cutshapes,mouldings,mouldeddiscsorplugs.
• Moulded cylinders with or without housings, end caps or threads.
• Moulded discs or plugs sintered directly into stainless steel sensor housings.
• Complexshapescontainingboththreadsand end caps.
Typical Applications
• Flamearresting
• Ignitionpreventioninfluegasstacks
• Explosion proof enclosure venting
• Flashbackpreventionforweldingtorches
• Battery vents
• Sensor protection
Features and Benefits
• Excellentflame-arrestingpropertiesdueto tortuous path within the sintered porous materials.
• Optimumflowofgases.Thecontrolledporesizeanduniformdensityensureanevenflowofgasto the sensor device.
• Forsoundsystemssuchasloudspeakers,the stainlesssteelmeshhasexcellentflame-arresting properties, but with reduced sound attenuation.
• Robustandeasytoassemble.
• Our products undergo SPC inspection and conformtoalltheleadingtestauthoritiessuchas EECS, UL, FM, CAS and BASEEFA.
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Wrexham Division US, Ashland Division Tel:+44(0)1978661144 Tel:+18045501600 Email:[email protected] Email:[email protected]
145
StainlessSteel Gas,Air,Steam Liquid OD ID Length WallThicknessGrade (µm) (µm) (mm) (mm) (mm)
For size required specify: outside diameter x inside diameter x length.
* Other grades of stainless steel powders and lengths and diameters are available.
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
10 1 6 34 28 75 320 5 15 34 28 75 340 25 30 34 28 75 310 1 6 34 28 100 330 5 25 34 28 100 340 25 30 34 28 100 310 1 6 44 38 500 330 5 15 44 38 500 340 25 30 44 38 500 310 1 6 54 48 530 330 5 15 54 48 530 340 25 30 54 48 530 310 1 6 76 70 760 330 5 15 76 70 760 340 25 30 130 124 760 310 1 6 130 124 760 330 5 15 130 124 760 340 25 30 130 124 760 3
FLOW AND SOUND CONTROL
Sinterflo® P Porous Powder CylindersforGas,SteamandLiquid
Porvair Filtration Group manufacture a wide range of Sinterflo® P porous sintered stainless steel powder cylinders.
Thesecylindersareusedforfabricationintofiltersforapplicationsinaggressiveenvironments.Madebyisostaticpressing,thesecylindershavenoseamweld,leadingtouniformfiltrationandlesscorrosion.OthermaterialssuchasMonel®, Hastelloy® and Inconel® are also available.
Features and Benefits
• Withstandamaximumdifferentialpressureofupto4.9bar(71psi)andanoperatingtemperatureof-51ºCto204ºC(-60ºFto399ºF).
• High dirt holding capacity.
• Easilyre-cleanable,allowingforlongfilterlifeandreduced operating costs.
Standard Sizes for Sinterflo® P Stainless Steel Cylinders
Typical Applications
Gas Filtration • Highly aggressive gasses
Steam Filtration • Breweries
• Chemicals
• Dairies
• Food and beverage
• Pharmaceuticals
Liquid Filtration • Chemicals
• Food and beverage
• Pharmaceuticalsandcosmetics
• Solvents
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
146
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Poro
us C
ups,
Bus
hing
s a
nd S
pa
rge
rsFl
ow
an
d S
ou
nd
Co
ntr
ol
Porvair Filtration Group manufacture a wide range of cups and bushings for the process and industrial markets.
Poroussinteredmetalcupsandbushingsprovideadditionalporoussurfaceareaforlongerfilterservicelifeorforincreasedpermeabilitywhencomparedtoporoussinteredmetaldiscsofthesamediameter.
Forthebestporesizeuniformityandquality,poroussinteredcupsandbushingsarerecommendedwhenthelengthtodiameterratioislessthan3:1.
Whenthelengthtodiameterratioofapartismorethan3:1,thenaporoussinteredmetaltubeisthepreferredoptionforthebestporesizeuniformity.
Typical Applications
• Filters
• Aerators
Features and Benefits
• Large surface area.
• Increasedpermeability.
• Highoperatingtemperatures.
Porous Cups and Bushings
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Wrexham Division US, Ashland Division Tel:+44(0)1978661144 Tel:+18045501600 Email:[email protected] Email:[email protected]
Porvairofferacompleterangeofporousmaterialsforgas/liquidcontactapplicationsacrossavarietyofindustries,including:
• Food and beverage
• Wasteandwatertreatment
• Chemicalprocess
• Pharmaceuticals
Asamanufacturerofporousmediaandelements,weareabletospecify,designandmanufacturethemostefficientproductforagivenapplication.
Thekeytoefficientgastransferistogenerateveryhighvolumesoffinebubbles.Ithasbeenshownthata1mm(0.04”)bubblehas6timesthegas/liquidcontactthanthatofa6mm(0.24”)bubble.Therefore,werecognisethatbubblesizeisessentialtooptimisemasstransferandreducegasconsumptionandenergycosts.
ElementsareavailableinSinterflo® sintered porous stainlesssteelorVyon® sintered porous polyethylene or Polypropylene.
Stainless steel spargers are supplied in stainless 316L and higher alloys such as Inconel® and Hastelloy® for veryaggressiveapplications.Beingmanufacturedfromsuchresistantmaterials,Porvair spargers are cleanable andifnecessaryheatorsteamsterilisable.
Theelementsaredesignedandmanufacturedfromuniform,fine,controlledporesizemediatoachieveexcellentperformanceinthedistributionofalargenumberofsmallgasbubblesforahigherinterfacialarea.
Typical Applications
Intrusiveandnon-intrusivetangentialpipelinespargers:
• Forthetreatmentofwastewater
• Volatilestripping
• Steaminjection
Tankspargers:
• Fermentation
• Agitation
• Bioremediation
• Oxygen stripping
• De-watering
• Dissolvedairflotationprocessesusedbymajoroilcompanies
Features and Benefits
• Rugged,fixedporemedia.
• Bubblesizecanbecontrolledbyawiderangeofavailablemediaporesizes.
• Temperatureandcorrosionresistantmaterialsofconstruction.
• High quality, all-welded, robust construction.
• Higherdiffusionratesfromsmallerspargingelements.
• Cleanable.
• Spargerdiameterandconnectordesignedtomeetapplicationrequirements.
Spargersfor Liquid and Gas Contact Applications
147
FLOW AND SOUND CONTROL
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Vyon® is a porous permeable plastic material made from high density polyethylene by a modern powder sintering process.
TheVyon® silencer is a sintered polyethylene body mouldedtoahighdensitypolyethyleneadapter.
The silencer screws directly into the exhaust port of a control valve. The exhausting air escapes to the atmospherebyexpandingthroughtheporousbody.
Thenoisefromasingleunsilencedexhaustportisreducedfromabout90decibelstobetween60and70decibelswhenfittedwithaVyon® silencer. 90 decibels correspondstothenoiseproducedbyaheavytruckor underground train passing at a distance of a few feetandrepresentstheacknowledgeddangerlevelto which people should not be exposed for any length oftime.Bycomparison,60decibelscorrespondstonormalconversationatadistanceof1metre(3feet).
Vyon®silencersareavailabletopneumaticequipmentmanufacturersinourexclusivegreybody/blackadaptorcolourcombinationdirectfromPorvair Filtration Group.
Typical Applications
• Silencing
• Filtrationforpneumaticequipment
• Sound attenuation
Features and Benefits
• Significant noise reduction
Up to 30 decibels, the difference between an undergroundtrainandnormalconversation.
• Easy installation
Our silencers are available with BSP thread connections.Theyscrewdirectlyinto,andmustalwaysmatchthesizeoftheexhaustport.
• Operating conditions
Forapplicationonsystemswithworkingpressuresupto10bar(150psi).
• Minimal flow loss
Effectivelyzeroinavastnumberofapplications.
• Minimal maintenance costs
Elementscanbecleanedandreused,reducingreplacementandmaintenancecosts.
• Maintenance free
Our silencers are unaffected by water or oil. They shouldnotbeallowedtobecomeblockedorblinded with debris.
Vyon® SilencersPneumaticEquipmentSilencing
148
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Vyo
n® S
ilenc
ers
Flo
w a
nd
So
un
d C
on
tro
l
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Wrexham Division US, Ashland Division Tel:+44(0)1978661144 Tel:+18045501600 Email:[email protected] Email:[email protected]
149
Specifications
Materials of ManufactureBody: Vyon® Sintered porous HDPE Adaptor: InjectionmouldedsolidHDPE
FittingBSP(BritishStandardPipe)
Fitting Guide
Maximum Working Pressure10bar(150psi)
Noise ReductionUp to 30dB
Operating Temperature Range-70°Cto+80°C(-94°Fto176°F)
FLOW AND SOUND CONTROL
Full
He
igh
t
Bod
y H
eig
ht
Width
Fittingsize FullHeight BodyHeight Width (Inches) (mm) (mm) (mm)
⅛" 35.5(1.36") 27.8(1.09") 12.9(0.51")
¼" 42.6(1.68") 35.7(1.04") 16.6(0.65")
⅜" 67.5(2.66") 57.4(2.26") 24.4(0.96")
½" 78.5(3.09") 68(2.68") 24.8(0.98")
¾" 139.8(5.5") 124.8(4.91") 37.6(1.14")
1" 154(6.06") 135.5(5.33") 47.8(1.22")
1" 115(4.53") 95.6(3.76") 47.8(1.88")
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
151
Porvair Filtration Group have a range of diffused aeration products for the treatment of both industrial and municipal effluent.
Supportedbyastrongresearchanddevelopmentteam,thetechnicalexpertiseandcapabilityofPorvair Filtration Group ensures that we are at the forefront of cleanwaterfiltertechnology,enablingustodelivercost effective, reliable clean water solutions tailored to ourcustomersrequirements.
Aerationisaneffectivemethodforbreakingdowntheorganiccomponentsofeffluents.Sewageaerationsystemshavetwofunctions:
• To provide oxygen to feed the oxygen breathing aerobicbacteriathatdecomposesorganicmatter.
• Tostirtheeffluenttoensurethatitishomogeneousforefficientoxygenation.
Our diffused aeration products have been designed to optimisethesefunctionsandprovide:
• Easyfittingintonewinstallations.
• Easyretrofittingintoexistinginstallations.
• Highoxygentransferefficiency.
• Low operating costs.
• Lowmaintenancecosts.
IncludedintherangearebothBioVyonTM sintered porouspolyethyleneandEPDMmembraneproducts:
• Vyon® disc diffusers
• Vyon® tubular diffusers
151
Disposable Diffused Aeration UnitsforWaterTreatment
The reliable Vyon® porous polyethylene disc diffusers, supplied by Porvair Filtration Group, are used in the breaking down of pollutants in sewage and industrial waste water, by the highly efficient transfer of oxygenated air.
Porvair Filtration Group porous polyethylene disc diffusersareavailableinarangeofporesizesandpermeabilities,ensuringacorrectmatchtoexactingcustomerprocessrequirements.ThisdiffuserisadirectreplacementfortheDegrémontTM230mm(9.05”)CeramicDisc.
Our diffusers can be supplied as disc only, with or withoutseal,orasacompletediffuserassembly,withtheabilitytobeeasilyretrofittedintoexistinginstallations.
Typical Applications
• Watertreatment
Features and Benefits
• Highoxygentransferefficiency.
• Low operating costs.
• Lowbackpressure.
• Resistanttochemicalattack.
• Easilyretrofittedtoexistinginstallations.
• Lightweightandresistanttodamage.
Specifications
Materials of ManufactureDisc: HighDensity
Polyethylene
Gasket: WastewaterapprovedEPDM
Fixings: StainlesssteelringandRilsan® Coated Clips
Technical InformationDiameter: 230mm(9.05”)
WallThickness: 6mm(0.24”)
Weight: 0.38kg(2.2lb)nom.
BubbleSize: 2-4mm(0.08”-0.16”)
RecommendedAirFlow: 1-5m2 (10.8 - 53.8ft2)/hr/diffuser
Vyon® Disc Diffusers High Density Polyethylene Disc Diffusers
152
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Vyo
n® D
isc
and
Tub
ula
r Diff
use
rsDisp
osableDiffusedAerationUnitsfo
rWaterTreatm
ent
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Wrexham Division US, Ashland Division Tel:+44(0)1978661144 Tel:+18045501600 Email:[email protected] Email:[email protected]
153
DISPOSABLE DIFFUSED AERATION UNITS
Porvair Filtration Group manufacture a range of thigh density polyethylene tubular diffusers. These are made with regulatory approved materials for potable water applications.
Porvair’s tubular diffusers can be used over a large pH range,arehighlychemicalresistantandcanbeusedforavarietyoforganicchemicals,acidsandalkalis.
Theycanbecustommadeinavarietyofdiametersand lengths. They are highly robust and produce uniformbubblesizeandpatterntoensureeffectiveoxygenation and long service life.
The tubular diffusers are produced over a large range ofefficienciesforeffectiveparticleremoval.
Typical Applications
• Watertreatment
• Potablewaterfiltration
• Ponds
• Rivers
• Fishfarms
Features and Benefits
• Robust and rigid.
Specifications
Materials of ManufactureTube: HighDensity
Polyethylene(HDPE)
Adapter: HighDensityPolyethylene(HDPE)
Gasket: EDPM
Technical InformationApproximateWeight: 0.3kg(0.7lb)per500mm
(19.67”)diffuser
DryPermeability: 94m3(24,832gal)/hr/500mmdiffuser@15mbar(218psi)Δp
Diffusersurfacearea: 0.1175m2 (1.26ft2)for500mm(19.67”)diffuser
Designpressure: 10-90kPa(0.1-0.9bar)
Designtemperature: 1oC to 50oC (34oF to 122oF)
TypicalSOTE%/mdepth: 6.8%
Vyon® Tubular DiffusersHigh Density Polyethylene Tubular Diffusers
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
155
Porvair continues to research new materials for filtration and separation. Examples are the development of metallic membranes or the use of specialist surface modification, to provide chemical or physical properties that are beneficial to the separation activity or the longevity of the filtration equipment.
Porvair Filtration Group currentlymanufacturesthespecialityproductStabifilTM,tocomplimentitscapabilityinthefoodandbeverageprocessingmarket.
This product has been developed as a unique technology that is at the interface of Porvair’sfiltrationandporousmaterialtechnology.
155
Speciality Products
StabifilTM has been developed as a unique technology that is at the interface of Porvair’s filtration and porous material technology. The unique manufacturing process allows contact between the adsorbent and the beverage to be at its optimal.
Theproductcanbemanufacturedintheformatofafiltercartridgeandwillfitintomostindustrystandardhousingsusedinthefoodandbeveragesindustry;thusprovidinganeconomicmeansbywhichthestabilisation process can be integrated into the processing of beverages.
StabifilTMishighlyflexibleduetotherobustnessofthecompositematerial,whichenablesittobetobeeasily incorporated into any process where beverage stabilisation is required.
Typical Applications
• Beer and wine stabilisation
• Spirits
• Vinegar
• Fruitjuice
• Purewatersupplysystems
Features and Benefits
• Highlyefficient.
• Easy regeneration.
• Robust characteristics.
• Clean and safe process.
• Rapidreplacement.
• Flexibleanddynamicstabilisation.
• Capacityiseasilyincreasedatminimalcost.
• Accurate and reproducible.
• Minimallossofbeverageinadsorbentmedia.
• Lowcapitalcostandinvestment.
StabifilTM for the Stabilisation of Beverages
Sta
bifi
lTM fo
r the
Sta
bili
satio
n o
f Be
vera
ge
sSp
ec
ialit
y Pr
od
uc
ts
156
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
157
Specifications
Cartridge ConstructionStabifilTMcartridgesareconstructedfrommaterialsproventobenon-toxicandmeetinternationallegislationincludingEC10/2011forfoodcontact,USPVIand FDA CFR Title 21.
The cartridges are built using technology that is unique to Porvair’sfiltercartridgesandporouspolymers.
No glues or resins are used to bond the adsorbent, polymerorcartridgehardware.
Product EvaluationBelow is a chart showing tannoid reduction of a selectionofbeersdosedatanequivalentof25g/hlofadsorbent.
AnumberofdifferenttypesofbeerswereprocessedthroughascaleddownStabifilTMfiltercomprisedofa PorvairS-typefiltermodule.Aspecificflowrateof20hl/hr/m2wasused,withacontacttimebetweentheadsorbentandbeerofjust12seconds.Thebeerwasprocessedwithin20minutesandrapidlyregeneratedin situ with caustic cleaning followed by a phosphoric acid wash.
A17-foldregenerationoftheStabifilTM cartridge indicatednolossofstabilisationeffect;furthermore,nopowder was present in any of the processed beer.
SPECIALITY PRODUCTS
60
Fresh 1 2 3 4 5 6 7 8 9 10 11 12 13 17
Redu
ctio
n of
Tann
oids
(%)
Regeneration Number
50
40
30
20
10
0161514
Blonde Beer 1 Blonde Beer 2 India Pale Ale Blonde Beer 1 Dark Beer
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
159
Porvair Filtration Group manufacture a range of auxiliary products to provide supplementary system support.
Forexample,differentialpressureindicators(DPI’s)provide indication of increasing differential pressure, filterblockageorby-passbybothvisualandelectricalsignal.
The DPI can also be set to provide a signal of decreasingdifferentialpressureinthesystemandinsomeinstancesthatthesystemhasbeenoperated.
These are lightweight, robust and reliable for use in hydraulic,fuelandlubeoilsystems.
159
Auxiliary Products
160
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Diff
ere
ntia
l Pre
ssur
e In
dic
ato
rsA
uxi
liary
Pro
du
cts
Contact Information: UK, Segensworth Division US, Ashland Division Tel:+44(0)1489864330 Tel:+18045501600 Email:[email protected] Email:[email protected]
Porvair Filtration Group manufacture a wide range of differential pressure indicators (DPI’s). Porvair DPI’s help protect critical aircraft systems, providing an indication of impending or actual blockage when the filter element has become blocked and requires maintenance or replacement.
Thesecomponentsfunctionbymonitoringthepressuredifferentialbetweentheupstreamanddownstreamofafilterelementtoprovideconditionmonitoringandprovideanalerttopotentiallydangeroussystemconditions,suchasdrasticflowrestrictions,filterelementdamage,lineblockageorupstreamreleaseofcontaminants.
Porvairindicatorsaredesignedandmanufacturedusing proven robust design techniques to ensure resistanceagainstthemostsevereofpressureandvibrationenvironments.
Indicationcanbebymeansofavisualorelectricaloutput,oracombinationofbothvariants.Visualindicationisprovidedbymeansofaredcolouredpop-upbuttonthatremainsintheactuatedpositionuntilmanuallyreset.Electricaloutputscanbeprovidedbyflyingleadorawidevarietyofstandardandbespokeelectricalconnectors.
Further to standard differential pressure indicators and dependentonspecificationrequirements,Porvair can incorporateadditionaldesignfeaturessuchas:
• Thermal lockout Preventing false actuations during expected high viscosity pressure conditions such as cold systemstart-up.
• Non-reset mechanisms RequiringremovaloftheDPIandaspecificorientation in order to reset, preventing a fail-safe against.
• Surge damping Providing resistance against false actuations duringinadvertentsystempressurespikes.
Typical Applications
• Fuel
• Lubricant
• Hydraulic
• Coolant
• Pneumatic
Features and Benefits
• Lightweight
• Robust structure
Options • Visual
• Electrical
Differential Pressure Indicatorsfor the Aerospace Industry
161
AUXILIARY PRODUCTS
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
163
Porvair Filtration Group manufacture an extensive range of porous metal and polymeric materials to provide optimum solutions for a wide variety of applications.
ThesematerialscanbepurchasedforOEMproductsorbeintegratedandpackageintofinishedproducts.
Ourcorematerialsare:
• Sinterflo® sintered porous metal materials Mainlysinteredporousstainlesssteelandbronze materials,sinteredmetalfibreandmulti-layer stainlesssteelmeshes.
• Vyon® sintered porous plastic materials Mainly sintered porous polyethylene and polypropylenematerials.
• BioVyonTM sintered porous plastic materials SpecialisedVyon®materialsmanufactured forapplicationsinthelifesciencemarkets.
Theapplicationsforthesematerialsinclude:
• Filtration,manyanddiverseapplicationsincludingair,water,steamandaggressivechemicals.
• Batteryventsandflamearrestorplugs.
• Flamearrestorsforgassensorprotection.
• Powderfluidisationandsolidshandling.
• Silencing.
• Vacuumtables.
• Sensor protection.
• Sparging.
• Fragranceemanationandchemicalcontrolledrelease.
• Solidphaseextractionandchromatography columnfrits.
• Medicaldevicefiltration.
163
Media and Materials
Manufactured from randomly laid metal fibres, sinter-bonded to form a uniform high porosity filter medium, Sinterflo® F demonstrates a significantly low pressure drop, high permeability and excellent dirt holding capacity.
Withthefeasibilitytoformulatemetalfibrestomeetspecificapplicationrequirements,combinedwithinherentdurability,sinteredmetalfibrefilterscanbecleanedinsituwithoutinterruptingprocessflowtherebyprovidingtheultimateinprocesseconomicsbyreducingdowntimetoaminimum.
Typical Applications
• Catalyst recovery and retention
• Gasification
• Chemicalproduction
• Ventfilters
• Agrochemicalapplications
• Liquidandgaseousammonia
• Pharmaceuticalpowderrecovery
• Steamfiltration • Culinarysteam • Processsteam
Features and Benefits
• Resistant to high temperatures and corrosive environments Suitableforaggressiveairandliquidfiltrationapplications.
• Can be cleaned in situ Reducesdowntimetoaminimumprovidingexcellentprocesseconomics.
• Pleatable structure Offers higher surface area with excellent dirt holdingcapacityforlongeron-streamlife.
• High void volume Provideshighpermeabilitycombinedwithlowpressure drop.
Sinterflo® FSintered Metal Fibre
164
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Sint
erfl
o® S
inte
red
Po
rous
Me
tals
Me
dia
an
d M
ate
rials
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Wrexham Division US, Ashland Division Tel:+44(0)1978661144 Tel:+18045501600 Email:[email protected] Email:[email protected]
165
A robust material manufactured from sinter-bonded metal powders. Primarily produced in 316L grade for use in temperatures up to 540ºC (1,004ºF), depending on process conditions, and offering resistance to most chemicals, Sinterflo® P media can also be produced in other grades of stainless steel and alloys such as Inconel®, Hastelloy® and Monel®.
Sinterflo®Ppowdermediacanbemanufacturedinbothdiscformatorincylinderformat.Forcylinders,ourisostaticpressingensuresgreatermediauniformitywithno welds, leading to increased corrosion resistance.
Typical Applications
• Catalyst recovery
• Polymermelt
• Gasification
• Chemicalproduction
• Slurry oils
• Steamfiltration • Culinarysteam • Processsteam
Features and Benefits
• Resistant to high temperatures and corrosive environments
Suitableforaggressiveairandliquidfiltrationapplications.
• Strength and Robustness
Ensuresreliabilityandlongeron-streamservicelife.
• Excellent media uniformity Allowsconsistentfiltrationandeffectiveloading.
• Seamless structure No welds provide increased corrosion resistance.
Sinterflo® PSintered Metal Powder
MEDIA AND MATERIALS
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
166
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Sint
erfl
o® S
inte
red
Po
rous
Me
tals
Me
dia
an
d M
ate
rials
Porvair Filtration Group manufacture precision woven meshes in various types of weaves from plain square mesh to Dutch (Hollander) Twill Weave to give the most defined absolute rating.
Plainsquareweaveforsimplesievingdutiesthroughvarious weave patterns (Reverse Plain Dutch, Broad MeshTwillandSinglePlainWeave)toDutchTwillWeavetoprovideforthemostcomprehensiveselectionofsurfacefiltrationduties.
Typical Applications
• Catalyst recovery and retention
• Gasification
• Chemicalproduction
• Ventfilters
• Agrochemicalapplications
• Liquidandgaseousammonia
• Steamfiltration • Culinarysteam • Processsteam
Features and Benefits
• Goodpermeability.
• High tensile strength.
• Availablefromsinglewrapdesignsthroughtocomplexmulti-layeredstructuresinpleatedconstructionstooptimisetheareaavailable.
• Somemeshesavailableinadiffusionbondedversionstoincreasedperformancesecurityofporeshapeandsize.
• Availableinthebroadestrangeofporesizesofanyfiltermediatype.
• Available in 316L stainless steel as standard with other alloys such as 304L stainless steel, 904L stainless steel, Inconel®, Hastelloy®, Monel® and Fecralloy® on request.
Sinterflo® MMetal Mesh
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Wrexham Division US, Ashland Division Tel:+44(0)1978661144 Tel:+18045501600 Email:[email protected] Email:[email protected]
Porvair Filtration Group’s sintered metal mesh composite multi-layer precision filters are produced using a novel sintering process resulting in superior mechanically strong structures.
Primarilymadefrom316Lstainlesssteel,theyarealsoavailable in Inconel®, Hastelloy® and Monel®materialsforuseinthemostaggressiveenvironments.
Dependingonatmosphericconditions,ourstainlesssteeloptioncanbeusedintemperaturesupto540ºC(1,004ºF),withintermittentoperatingpeaksupto650ºC(1,202ºF),andareresistanttomostchemicals.
Formatsavailableincludeflatsheet,customshapes,welded cones and welded cylinders, and the materialscanbemanufacturedinavarietyoflayercombinationsdependingonyourspecificapplication.
Standardmaterialcombinationscanincludeperforated plates for additional support.
Sinterflo®MCisavailableinarangeoffiltrationgradesfrom2micron.
Typical Applications
• Powderfluidisation
• Liquid applications
• Slurry oils
• Steamfiltration • Culinarysteam • Processsteam
Features and Benefits
• Fabricated shapes without expensive support structures or joining strips Offers robust and self-supporting structures.
• Can be cleaned repeatedly Suitableforreuse;providinganeconomicalchoice.
• Non-shedding media Providesresistancetomechanicalabrasion.
• Easily custom-engineered Tomeetrequiredspecificationsofmaterials,strength,flowrequirements,thickness,micronratingandenvironment.
Sinterflo® MCSintered Metal Mesh Composite
167
MEDIA AND MATERIALS
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Our Vyon® sintered porous plastic materials offer excellent chemical compatibility, exceptional strength and are resistant to most acids, bases, many organic chemicals and temperatures up to 110ºC (230ºF).
Produced in both sintered porous polyethylene and polypropylene,materialsareavailablein:
• Roll
• Sheet
• Cut shapes
• Cones
• Mouldedformats
Typical Applications
• Domesticwaterfilters
• Activatedcarbonfilters
• Chemicalfilters
• Airanddustfilters
• Fluidisationandaerationofbulksolids
• Battery vents
• Pneumaticsilencers
• Waterandeffluentaeration
• Fragranceeminators
• Vacuumplatensandcones
• Vacuumholddowntablecovers
Features and Benefits
• Strong lightweight and self supporting Aversatilematerialthatcanbemanufacturedin avarietyofshapesandsizes. • Narrow controlled pore size distribution Averyefficientandeffectivefiltrationmaterial. • High and even porosity Lowpressuredropandevenflow. • Chemically inert Resistanttomanychemicalsmakingitsuitable formanyapplications.
Vyon®
Sintered Porous Plastics
168
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Vyo
n® S
inte
red
Po
rous
Pla
stic
sM
ed
ia a
nd
Ma
teria
ls
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Wrexham Division US, Ashland Division Tel:+44(0)1978661144 Tel:+18045501600 Email:[email protected] Email:[email protected]
169
MEDIA AND MATERIALS
All Vyon® grades are available in polyethylene. Only Vyon® D, F and HP grades are available in Polypropylene.
Name FiltrationGrades Liquids(µm)* Gases(µm)
Vyon® T 10 2
Vyon® M 6 1
Vyon® D 15 6
Vyon® F 35 10
Vyon® HP 70 30
Vyon® Material Range
Through a range of proprietry techniques, Porvair offeradvancedBioVyonTMmaterialswithenhancedperformancetechniques.Belowareourmediagradesandthestandardandspecialisttreatedmaterialsavailable:
Vyon® Media Grades
Vyon™ HydrophobicOurhydrophobicVyonTMispermanentlytreatedtopreventthematerialfromwetting-outinmanyorganicsolvents.
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
170
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Bio
Vyo
n™ S
inte
red
Po
rous
Pla
stic
sM
ed
ia a
nd
Ma
teria
ls
Porvair Filtration Group is a major manufacturer and developer of sintered porous materials, offering optimum solutions in a wide range of applications. Spearheading the porous polymeric materials is BioVyonTM, manufactured to high cleanliness standards to meet the demands of the Bioscience market.
BioVyonTM sintered porous polypropylene or polyethylene is available in rolls and sheets that arecuttosize,machinedtoshapeorfabricatedtomeettheexactingrequirementsofthediagnostic,biopharmaceuticalandhealthcareindustry.BioVyonTM polyethyleneisalsoavailableinamouldedformat.
OfferinghighvoidvolumesmakesBioVyonTM ideally suitedtowicking,emanationandapplicationsrequiringhighflowwithminimumhold-up.
Produced in both sintered porous polyethylene and polypropylene,materialsareavailablein:
• Roll
• Sheet
• Cut shapes
• Cones
• Mouldedformats
Quality Assurance
BioVyonTMhasbeentestedforbiocompatibilityandbio-safetytoUSPClassVIandisapprovedto FDA 21 CFR and EC-directives. Manufactured in an ISOCleanroomenvironmentinaccordancewithcGMP,BioVyonTM’ssuitabilitytomedicaldeviceshasbeendemonstratedthroughitsDrugMasterFilestatus. Registered to ISO 9001, Porvair Filtration Group proceduresaresubjectedtohighstandardsofquality.
Typical Applications
• Medicaldevicefiltration
• Personalhealthcareandpharmaceuticalvents • Diagnostics
• Catheter vents
• Antibodypurificationproducts
• Porouschromatography
• Samplepreparationforanalyticalchromatographyapplications
• Drug delivery products
Features and Benefits
ContinuousmaterialdevelopmenthasresultedinauniquerangeofBioVyonTMmaterialseachexhibitingdifferent properties critical to these progressive markets.
BioVyon™Sintered Porous Plastics
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Wrexham Division US, Ashland Division Tel:+44(0)1978661144 Tel:+18045501600 Email:[email protected] Email:[email protected]
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK: Tel: +44(0)1489864330 US: Tel: +18045501600 Email: [email protected] Email: [email protected]
BioVyonTM Advanced Material Range
Through a range of proprietry techniques, Porvair offeradvancedBioVyonTMmaterialswithenhancedperformancetechniques.Belowareourmediagradesandthestandardandspecialisttreatedmaterialsavailable:
BioVyonTM Media Grades
BioVyon™ UltracleanOurBioVyonTMrangeofstandardultracleanmaterialsare treated to exhibit very low extractables.
BioVyon™ NanocleanOurnanocleanBioVyonTM range offers a high purity materialwithtraceextractables.
BioVyon™ Hydrophobic and OleophobicOurhydrophobicoroleophobicBioVyonTM is permanentlytreatedtopreventthematerialfromwetting-outinmanyorganicsolvents.
BioVyon™ HydrophilicOurhydrophilicBioVyonTMmaterialispermanentlytreated for instant water wettability.
BioVyon™ LaminatesUsedasasupportformembranes,ourBioVyonTM laminatematerialextendsthefiltrationrangeto0.1µmfortheretentionofmicroorganisms.
BioVyon™ CompositesOurBioVyonTMcompositesincorporateactivesubstanceswithinthesinteredporousmaterial,suchaschromatographyresins,carbonandcellulosics.
B ioVyon™ FunctionalisedOurchemicallyorbiologicallyactivesinteredporousmaterialisfunctionalisedwithamines,carbonyls,carboxylicacids,linkerchainsorligands.
171
MEDIA AND MATERIALS
Name FiltrationGrades Liquids(µm) Gases(µm)
BioVyonTM T 10 2
BioVyonTM M 6 1
BioVyonTM D 15 6
BioVyonTM F 35 10
BioVyonTM HP 70 30
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
173
Many of our standard products for the process industries can be ordered using the applicable ordering guides from this section of the catalogue. Please follow the step-by-step guide on each relevant page.
However,manyproductsarecustommadetomeetspecificprojectrequirementsandcannotbeorderedthrough this catalogue’s ordering guides. For further information,pleasecontactamemberoftheSalesTeam.
173
Ordering Guide
174
CONTENTS INDEXORDERING INFORMATIONPRODUCTSINTRODUCTION
Sint
erfl
o® M
eta
l Filt
er C
art
ridg
es
and
Ele
me
nts
Ord
erin
g G
uid
e
Sinterflo® FMetal Fibre Cartridge andElements
Micron Rating(liquid)Table 3
e.g.:0040=40micron
Sinterflo®F:3µmto60µmavailable,specify ‘Absolute’ rating.
Nominal Cartridge Length*Table 2
05 125mm(5")
10 250mm(10")
20 498mm(20")
30 745mm(30")
40 1012mm(40")
* Other non-standard lengths are available on request
End FittingsTable 1
0 DOEfitting/pleated
1 DOEfitting/cylindrical
2 SOE226fitting/pleated
3 SOE226fitting/cylindrical
4 SOE222fitting/pleated
5 SOE222fitting/cylindrical
7 SOEthreaded/pleated
8 SOEthreaded/cylindrical
Seal Material*Table 4
C Chemraz®
E EPDM
N Nitrile
P PTFE(DOEonly)
S Silicone
F FEPcoatedViton®(SOEonly)
T FEPcoatedsilicone(SOEonly)
Y FEPcoatedEPDM(SOEonly)
V Viton®
X No seal
Product Code: 250 - - C - Table 1 Table 2 Table 4 Table 5 Table 6Table 3
DOE
222
226
Threaded
end
Double Open Ended Fitting
DOE
222
226
Threaded
end
Threaded End Fitting
DOE
222
226
Threaded
end
226 Fitting
DOE
222
226
Threaded
end
222 Fitting
* Omit ‘Table 4’ for the threaded option.
Guard/Support OptionTable 5
G Guard(pleatedonly)
S Backflushsupport(cylindricalonly)
N None
Fin Option(SOE226andSOE222)
Table 6
F Fin
N Nofin
Threaded Option
Pleated
1 1" NPT
2 1.5" NPT
3 1" BSPT
4 2" BSPT
5 1.5" BSPT
6 2" NPT
7 1.25" BSPT
Cylindrical
1 1" NPT
2 1.5" NPT
3 1.5" BSPP
4 2" BSPT
5 1" BSPT
6 1.5" BSPT
Options*
* Omit ‘Table 6’ for the DOE option.
DOE: Double Open Ended fitting. SOE: Single Open Ended fitting.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
175
ORDERING GUIDE
Sinterflo® PMetal Powder Cartridge andElements
Micron Rating (liquid)Table 3
e.g.:0040=40micron
Sinterflo®P:3µmto60µmavailable,specify ‘Absolute’ rating.
Nominal Cartridge Length*Table 2
05 125mm(5")
10 250mm(10")
20 498mm(20")
30 745mm(30")
40 1012mm(40")
* Other non-standard lengths are available on request.
End FittingsTable 1
3 SOE222fitting
4 SOE226fitting
5 SOE threaded
6 DOEfitting
DOE: Double Open Ended Fitting. SOE: Single Open Ended Fitting.
DOE
222
226
Threaded
end
Double Open Ended Fitting
DOE
222
226
Threaded
end
Threaded End Fitting
DOE
222
226
Threaded
end
226 Fitting
DOE
222
226
Threaded
end
222 Fitting
Seal Material*Table 4
C Chemraz®
E EPDM
N Nitrile
P PTFE(DOEonly)
S Silicone
F FEPcoatedViton®(SOEonly)
T FEPcoatedsilicone(SOEonly)
Y FEPcoatedEPDM(SOEonly)
V Viton®
X No seal
Product Code: 405 - - -Table 1 Table 2 Table 4 Table 5Table 3
* Omit ‘Table 4’ for the threaded option.
Threaded Option*Table 5
1 1" NPT
2 1.5" NPT
3 1.5" BSPT
4 1” BSPT
5 2" BSPT
* Omit ‘Table 5’ for the DOE option.
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
176
CONTENTS INDEXORDERING INFORMATIONPRODUCTSINTRODUCTION
Sint
erfl
o® M
eta
l Filt
er C
art
ridg
es
and
Ele
me
nts
Ord
erin
g G
uid
e
Sinterflo® MMetal Mesh Cartridge andElements
Micron Rating (liquid)Table 3
e.g.:0040=40micron
Sinterflo®M:3µmto1000µmavailable,specify‘Nominal’rating.
DOE
222
226
Threaded
end
Double Open Ended Fitting
DOE
222
226
Threaded
end
Threaded End Fitting
DOE
222
226
Threaded
end
226 Fitting
DOE
222
226
Threaded
end
222 Fitting
Nominal Cartridge Length*Table 2
05 125mm(5")
10 250mm(10")
20 498mm(20")
30 745mm(30")
40 1012mm(40")
* Other non-standard lengths are available on request
End FittingTable 1
0 DOEfitting/pleated
1 DOEfitting/cylindrical
2 SOE226fitting/pleated
3 SOE226fitting/cylindrical
4 SOE222fitting/pleated
5 SOE222fitting/cylindrical
7 SOEthreaded/pleated
8 SOEthreaded/cylindrical
Seal Material*Table 4
C Chemraz®
E EPDM
N Nitrile
P PTFE(DOEonly)
S Silicone
F FEPcoatedViton®(SOEonly)
T FEPcoatedsilicone(SOEonly)
Y FEPcoatedEPDM(SOEonly)
V Viton®
X No seal
Product Code: 250 - - B - Table 1 Table 2 Table 4 Table 5 Table 6Table 3
Guard/Support OptionTable 5
G Guard(pleatedonly)
S Backflushsupport(cylindricalonly)
N None
Fin Option(SOE226andSOE222)
Table 6
F Fin
N Nofin
Threaded Option
Pleated
1 1" NPT
2 1.5" NPT
3 1" BSPT
4 2" BSPT
5 1.5" BSPT
6 2" NPT
7 1.25" BSPT
Cylindrical
1 1" NPT
2 1.5" NPT
3 1.5" BSPP
4 2" BSPT
5 1" BSPT
6 1.5" BSPT
Options*
* Omit ‘Table 6’ for the DOE option.
DOE: Double Open Ended fitting. SOE: Single Open Ended fitting.
* Omit ‘Table 4’ for the threaded option.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
177
ORDERING GUIDE
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
178
CONTENTS INDEXORDERING INFORMATIONPRODUCTSINTRODUCTION
End
Ca
p A
da
pte
rs fo
r Dis
po
sab
le C
art
ridg
es
Ord
erin
g G
uid
e
End Cap AdaptersDisposable Cartridges
Cartridge Top End Outlet End Code Description End Fitting Seal Quantity End Fitting Seal Quantity
A Code 3 Flat None Open O-ring 222 2
B Code 7 Fin None Open O-ring 226 2
C Code 8 Fin None Open O-ring 222 2
F N SOE Recess None Flat open O-ring 213 1
G GDOE(shortlength) Flatopen Flatgasket 1 Flatopen Flatgasket 1
H G SOE Flat None Flat open O-ring BS118 2 (fitintofilterhousing)
J 216(218),fin Fin None Open O-ring216 1 O-ring 218 1
K Code 2 Flat None Open O-ring 226 2
L 223,fin(nolugs) Fin None Open O-ring223 2
M DOE Flatopen Flatgasket 1 Flatopen Flatgasket 1
P Code18(retrofit) Flat None Open O-ring222 2
S Code28,fin(3lugs) Fin None Open O-ring222 2
T 223,flat(nolugs) Flat None Open O-ring223 2
U 224,fin Fin None Open O-ring224 2
V 226,fin Fin None Open O-ring226 2
W F20+Code7 Fin None Open O-ringBS226 2 (stainlesssteelcore)
X F20+Code2 Flat None Open O-ringBS226 2 (stainlesssteelcore)
Y BS832,flat Flat None Open O-ringBS832 2
Z F20+CodeY Flat None Open O-ringBS832 2 (stainlesssteelcore)
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
179
B F HGCA
K PMLJ S
T V W XU Y
Z
ORDERING GUIDE
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
180
CONTENTS INDEXORDERING INFORMATIONPRODUCTSINTRODUCTION
Dis
po
sab
le C
art
ridg
es
Ord
erin
g G
uid
e
Pre-FiltersDisposable Cartridges
Length (Nominal)Table 4
1 250mm(10")
2 510mm(20")
3 760mm(30")
4 1020mm(40")
5 125mm(5")
SealsTable 6
A Ethylene Propylene
B Silicone
C Viton®
D Nitrile
E FEPEncapsulatedViton®
G FEP Encapsulated Silicone
J DOE PTFE
Additional OptionsTable 7
A N+U
N Non-steamable(noinsert)
P Pharmaceuticalgrade**
U Unbranded
** Porvair pharmaceutical-grade filters are designed for use in cGMP manufacturing, processing or packaging facilities for injectable drug products and comply with the Federal Drug Administration’s regulations CFR Title 21, parts 211.72 ‘Filters’ and 210.3 (b) (6), and United States Pharmacopeia 788 ‘Particulate Matter in Injections’. These products contain a stainless steel insert.
AdaptersTable 5
A Code 3
B Code 7
C Code 8
F N SOE
G GDOE(shortlength)
H G SOE
J 216(218),fin
K Code 2
L 223,fin(nolugs)
M DOE
S Code28,fin(3lugs)
T 223,flat(nolugs)
U 224,fin
V 226,fin
Y BS832,flat
SOE: Single Open Ended DOE: Double Open Ended
Examplepartnumber:K01S2BBP KlearfilTM, 1µm, Standard hard cage, 510mm (20") long, Code 7, silicone seals, pharmaceutical grade.
Please refer to the individual product datasheets within this catalogue for absolute pore ratings (Table 2) and filter versions (Table 3) available for each pre-filter.
Pre-FilterTable 1
CR CarbofilTM
CP CryptofilTM
K KlearfilTM
M MicrofilTM
P PolyfilTM II
TA TekfilTM Absolute
TN TekfilTMNominal
GV TekfilTMGV
R TrapfilTM
VersionTable 3
R Rinsed
S Standard Hard Cage
Product Code: Table 7Table 1 Table 2 Table 3 Table 4 Table 5 Table 6
Absolute Pore Rating*Table 2
P5 0.5µmP6 0.6µmP8 0.8µm01 1µm02 2µm03 3µm05 5µm07 7µm10 10µm15 15µm20 20µm30 30µm40 40µm60 60µm75 75µm90 90µm105 105µm
* For the CarbofilTM filter select the 05 (5µm) option only.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
181
Membrane FiltersDisposable Cartridges
Length (Nominal)Table 4
1 250mm(10")
2 510mm(20")
3 760mm(30")
4 1020mm(40")
5 125mm(5")
Examplepartnumber:BT20S2BBP BiofilTM, 0.2µm, Standard hard cage, 510mm (20") long, Code 7, silicone seals, pharmaceutical grade.
Please refer to the individual product datasheets within this catalogue for absolute pore ratings (Table 2) and filter versions (Table 3) available for each membrane filter.
SOE: Single Open Ended. DOE: Double Open Ended.
AdaptersTable 5
A Code 3
B Code 7
C Code 8
F N SOE
G GDOE(shortlength)
H G SOE
J 216(218),fin
K Code 2
L 223,fin(nolugs)
M DOE
S Code28,fin(3lugs)
T 223,flat(nolugs)
U 224,fin
V 226,fin
W F20+Code7 (stainlesssteelcore)
X F20+Code2 (stainlesssteelcore)
Y BS832,flat
Z F20+CodeY (stainlesssteelcore)
Absolute Pore RatingTable 2
02 0.02µm04 0.04µm10 0.1µm20 0.2µm45 0.45µm65 0.65µm100 1.0µm120 1.2µm
Membrane FilterTable 1
A AquafilTM
BT BiofilTM
BTP BiofilTM Plus
C ChemifilTM
F FluorofilTM*
HT HydrofilTM
HTP HydrofilTM Plus
VT VinofilTM
VersionTable 3
L Economy*
R Rinsed
S Standard
W StainlessSteelCore**
* BiofilTM only. ** Fluorofil Plus only.
ORDERING GUIDE
SealsTable 6
A Ethylene Propylene
B Silicone
C Viton®
D Nitrile
E FEPEncapsulatedViton®
G FEP Encapsulated Silicone
J DOE PTFE
* Porvair pharmaceutical-grade filters are designed for use in cGMP manufacturing, processing or packaging facilities for injectable drug products and comply with the Federal Drug Administration’s regulations CFR Title 21, parts 211.72 ‘Filters’ and 210.3 (b) (6), and United States Pharmacopeia 788 ‘Particulate Matter in Injections’. These products contain a stainless steel insert.
Additional OptionsTable 7
A N+U
N Non-steamable(noinsert)
P Pharmaceuticalgrade*
U Unbranded
Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 Table 7Product Code: - -
* Includes the FluorofilTM, FluorofilTM Plus and FluorofilTM F100.
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
182
CONTENTS INDEXORDERING INFORMATIONPRODUCTSINTRODUCTION
Dis
po
sab
le C
art
ridg
es
Ord
erin
g G
uid
e
Junior FiltersDisposable Cartridges
Absolute Pore RatingTable 2
20 0.2µm45 0.45µmP5 0.5µmP8 0.8µm01 1µm02 2µm05 5µm
Examplepartnumber:JB2050B BiofilTM, J-Style, 0.2µm, 136mm (5") long, silicone seal.
Please refer to the individual product datasheets within this catalogue for absolute pore ratings (Table 2) available for each junior filter.
Length (Nominal)Table 3
25 77.5mm(2.5”)
50 136mm(5”)
Product Code: Table 1 Table 2 Table 3 Table 4
Junior FilterTable 1
JB BiofilTM
JF FluorofilTM
JM MicrofilTM
JP PolyfilTM
F20VENT VentafilTM
S-Style
J-Style
SB BiofilTM
SF FluorofilTM
SM MicrofilTM
SP PolyfilTM
OptionsTable 4
B ½" BSP
X ¼" BSP
Threaded
A Ethylene Propylene
B Silicone
C Viton®
D Nitrile
E FEPEncapsulatedViton®
G FEP Encapsulated Silicone
Seals (J-Style)
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
183
ORDERING GUIDE
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
184
CONTENTS INDEXORDERING INFORMATIONPRODUCTSINTRODUCTION
Filte
r Ho
usin
gs
Ord
erin
g G
uid
e
Filter HousingsSingle and Multiple Round Housings
Product Code: FIA2110 - - -Table 1 Table 2 Table 3 Table 4 Table 5 Table 6
Bowl SealTable 6
V Viton® Standard
N Nitrile
S Silicone
E Epom
F PTFEcoatedViton® Standard
Drain TapTable 5
N Nonefitted(plugonly)
D Tapfitted
Indicator/Vent FittedTable 4
N Nonefitted
G Indicatorfitted
V Ventfitted(2way)
S Ventfitted(3way)
FIA 2110 Single Round Housing
Bowl LengthTable 1
1 310mm(12.2”) Nominal
2 580mm(22.8”) Nominal
3 800mm(31.5”) Nominal
4 187mm(7.4”) Nominal
5 1080mm(42.5”) Nominal
* Add 45mm to the bowl length for 226 style elements
Note: Other sizes and special housings can also be accommodated on request.
Connection OptionTable 2
1 1"BSPfemalepara.in/outstandard
2 3/4"BSPfemalepara.in/outviaadapter
3 2"ASA150lbflangesin/out
4 1"RJTfittingsin/out
5 1"Tri-cloverin/out
6 1/4"BSPPfemalein/outviaadapter
7 11/2"ASA150lbflangesin/out
8 1"NPTin/out
Element OptionTable 3
1 222
2 DDE
3 226p
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
185
ORDERING GUIDE
Product Code: FIA2600 - - - -Table 1 Table 2 Table 3 Table 4 Table 5
Element OptionTable 3
B Code7:226fin
C Code8:222fin
M DOEknifeedge
Connection OptionTable 4
1 2"BSPTmale
2 2"ASA150lbflanges
3 2" RJT
4 2" sch. 40 stubb pipes
5 11/2"ASA150lbflanges
6 2"NPTmale
7 11/4"BSPTmale
SealTable 4
V Viton®
N Nitrile
S Silicone
P PTFE
E EPDM
Standard LengthTable 2
10 250mm(9.8”)
20 498mm(19.6”)
30 745mm(29.3”)
40 1012mm(39.8”)
FIA 2600 Multiple Round Housing
Note: Other sizes and special housings can also be accommodated on request.
Number RoundTable 1
Availableinroundsrangingfrom2-30*.
e.g:2round=2.10round=10.
* Excluding 6 and 8 round.
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Metallic Last Chance Filtersfor the Printing Industry
Me
talli
c L
ast
Cha
nce
Filt
ers
for t
he P
rintin
g In
dus
try
Ord
erin
g G
uid
e
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
186
In-Line Filter (30mmStainlessSteel)
Final Ink Filter
Pleated Unrimmed Disc Filter
Minimumorderquantityforeachfilteris20units.
Product Code: 8069 - Table 1
Micron RatingsTable 1
0005B 5µm
0015B 15µm
0025B 25µm
0040B 40µm
Product Code: 8073 - 11 - 02 - 0010B
Product Code: 8071 - 01 - Table 1
Micron RatingsTable 1
0002B 2µm
0005B 5µm
0010B 10µm
0020B 20µm
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
187
ORDERING GUIDE
Grid Filter
Product Code: 8156
MicrodiscTM 4SS (47mmStainlessSteelDiscFilter)
Product Code: 8077 - - Table 1
Micron RatingsTable 2
0005B 5µm
0010B 10µm
0020B 20µm
Table 2
ConnectorsTable 1
11 2.6mmO/Dbarb
22 4.9mmO/Dbarb
33 3mmJaco®
44 6.5mmO/Dbarb
66 ¼" NPT
MicrodiscTM 3SS (30mmStainlessSteelDiscFilter)
Product Code: 8067 - - Table 1
Micron RatingsTable 2
0005B 5µm
0010B 10µm
0020B 20µm
Table 2
ConnectorsTable 1
11 2.6mmO/Dbarb
22 4.9mmO/Dbarb
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Disposable Air and Last Chance Filtersfor the Printing Industry
Dis
po
sab
le A
ir a
nd L
ast
Cha
nce
Filt
ers
for t
he P
rintin
g In
dus
try
Ord
erin
g G
uid
e
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
188
Minimumorderquantityforeachfilteris20units.
MicrodiscTM 4PS (45mmStandardDiscFilter)
Product Code: 8111 - - - Table 1 Table 2 Table 3
ConnectorsTable 1
33 Luer
11 CPC
Micron RatingsTable 2
0005B 5µm
0010B 10µm
0020B 20µm
0050B 50µm
HousingsTable 3
22 White acetal
33 Blackacetal
MicrodiscTM 3PS (33mmDiscFilter)
Product Code: 8159 - - - Table 1 Table 2 Table 3
ConnectorsTable 1
11 3mmJaco®
22 Femaleluer
HousingsTable 3
12 White acetal
13 Blackacetal
Micron RatingsTable 2
0005B 5µm
0010B 10µm
0020B 20µm
0050B 50µm
MicrodiscTM 1PA(15mmS-VentDiscFilter)
Product Code: 8163
MicrodiscTM 2PA(25mmS-VentDiscFilter)
Product Code: 8164
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
189
ORDERING GUIDE
MicrodiscTM 4PV (45mmPre-PumpDiscFilter)
Product Code: 8074 - - - 23Table 1 Table 2
ConnectorsTable 1
221 ¼" Jaco®
222 6mmJaco®
Micron RatingsTable 2
0005B 5µm
0010B 10µm
0015B 15µm
0020B 20µm
0050B 50µm
MicrodiscTM 7PS(74mmDiscFilter)
Product Code: 8169 - - - Table 1 Table 2 Table 3
ConnectorsTable 1
221 ¼”Jaco®
222 6mmJaco®
Micron RatingsTable 2
0005B 5µm
0010B 10µm
0020B 20µm
0050B 50µm
HousingsTable 3
11 Natural
13 Opaqueblack
Bullet Filter(5µmand10µm)
Product Codes: 8166 (5µm)and8065(10µm)
In-Line Filter (PEEK)
Product Code: 8098 - 6 - Table 1
Micron RatingsTable 1
0003B 3µm
0005B 5µm
In-Line UV Filter (PEEK)
Product Code: 8091 - 2 - Table 1
Micron RatingsTable 1
0003B 3µm
0005B 5µm
0010B 10µm
Last Chance Inkjet Filter
Product Code: 8087 - - Table 1 Table 2
ConnectorsTable 2
23 2.6mmbarb
Micron RatingsTable 1
0003B 3µm
0005B 5µm
0050B 50µm
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Capsule Filtersfor the Printing Industry
Ca
psu
le F
ilte
rs fo
r the
Prin
ting
Ind
ustr
yO
rde
ring
Gu
ide
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
190
MicrocapTM (FullyMoulded)
Minimumorderquantityforeachfilteris20units.
MicroprintTM
Filter MediaTable 2
1 PolyfilTM
2 KlearfilTM
HousingsTable 4
N Natural
C Opaqueblack
Micron RatingsTable 1
0050 0.5µm
0100 1µm
0300 3µm
0500 5µm
1000 10µm
2000 20µm
4000 40µm
6000 60µm
Product Code: 8089 - - - - Table 1 Table 2 Table 3 Table 4
HousingsTable 4
N Natural
C Opaqueblack
ConnectorsTable 3
AA ¼" barb
DD ¼"NPT(male)
FF CPC
GG1 ¼" Jaco®90°
GG2 6mmJaco®90°
JJ1 ¼" Jaco®
JJ2 6mmJaco®
PP Luer
QQ Luer90°
Micron RatingsTable 1
0050 0.5µm
0100 1µm
0300 3µm
0500 5µm
1000 10µm
2000 20µm
4000 40µm
6000 60µm
Filter MediaTable 2
1 PolyfilTM
5 KlearfilTM
ConnectorsTable 3
FF CPC
JJ1 ¼"Jaco®
JJ2 6mmJaco®
Product Code: 8096 - - - - Table 1 Table 2 Table 3 Table 4
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:[email protected] Email:[email protected]
191
ORDERING GUIDE
MicrojetTM
Product Code: 8131 - - 1 - PP - Table 1 Table 2
Micron RatingsTable 1
0500 5µm
1000 10µm
HousingsTable 2
N Natural
C Opaqueblack
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
192
CONTENTS INDEXORDERING INFORMATIONPRODUCTSINTRODUCTION
Ind
ex
by
Ap
plic
atio
n
Active Pharmaceutical Ingredients BiofilTM Plus 58-59 HydrofilTM Plus 70-71 FluorofilTM 62-63 FluorofilTM F100 66-67 PolyfilTM II 46-47
Activated Carbon Filtration Vyon® Porous Plastic 168-169
Aeration Metal Powder Filter Discs 94 Porous Cups and Bushings 146 Sinterflo® MC Fluidising Media 132-133 Sinterflo® P Metal Powder Aeration Units 130-131 Sinterflo® P Sintered Metal Powder 165 Spargers 147 Vyon® Disc Disffusers 152 Vyon® Tubular Disffusers 153
Agrochemical Filtration Sinterflo®FMetalFibreFilterElement 14-17 Sinterflo®MMetalMeshFilterElement 20-23 Sinterflo®PMetalPowderFilterElement 18-19
Air Filtration Metal Mesh Filter Discs 92 Metal Fibre Filter Discs 93
Ammonia Filtration (Liquid and Gaseous) Sinterflo®FMetalFibreFilterElement 14-17 Sinterflo®MMetalMeshFilterElement 20-23 Sinterflo®PMetalPowderFilterElement 18-19
Analytical Chromatography BioVyon™SinteredPorousPlastics 170-171
Metal Powder Filter Discs 94 Sinterflo® P Sintered Metal Powder 165
Antibiotics Biofil™II 56-57 Fluorofil™ 62-63 FluorofilTM F100 66-67 Hydrofil™ 68-69 Polyfil™ II 46-47
Autoclave Venting FluorofilTM 62-63 Ventafil™ 82-83
A Sinterflo® P Sintered Metal Powder
Ballast Water Sinterflo® MC Filter Plates 138-139
Battery Venting Sinterflo® P Metal Powder 165 Vyon® Porous Plastic 168-169 BatteryVentsandFlameArrestors 144
Beer (see Brewing)
Beverage AquafilTM 54-55 BiofilTM II 56-57 BiofilTM Plus 58-59 CryptofilTM 40-41 FluorofilTM 62-63 HydrofilTM 68-69 HydrofilTM Plus 70-71 KlearfilTM 42-43 MicrofilTM 44-45 PolyfilTM II 46-47 Sinterflo®FMetalFibreFilterElement 14-17 Sinterflo® M Metal Mesh Filter Element 20-23 Sinterflo®PPowderFilterElement 18-19 StabifilTM 156-157 TekfilTM 48-49 TrapfilTM 52-53 VinofilTM 72-73
Biopharmaceuticals AquafilTM 54-55 BiofilTM II 56-57 BiofilTM Junior 78-79 BiofilTM Plus 58-59 FluorofilTM 62-63 HydrofilTM Plus 70-71
Bioprocessing FluorofilTM 62-63 HydrofilTM 68-69 HydrofilTM Plus 70-71 KlearfilTM 42-43 MicrofilTM 44-45 MicrofilTM Junior 74-75 PolyfilTM II 46-47
Bioreactors FluorofilTM 62-63 PolyfilTM II 46-47
B
Contact Information: UK, Segensworth Division US, Ashland Division Tel:+44(0)1489864330 Tel:+18045501600 Email:[email protected] Email:[email protected]
193
Sinterflo® P Sintered Metal Powder 165 Spargers 147
Bioscience BioVyonTM Porous Plastic 170-171 Sinterflo® P Sintered Metal Powder 165
Biotechnology BiofilTM II 56-57 FluorofilTM Plus 64-65
Brewing BiofilTM II 56-57 FluorofilTM 62-63 KlearfilTM 42-43 MicrofilTM 44-45 PolyfilTM II 46-47 StabifilTM 156-157 TekfilTM 48-49 TrapfilTM 52-53 VinofilTM 72-73
Canister Collection Vessel Vents BioVyonTM Porous Plastic 156-157
Carbon Fines Removal FluorofilTM F100 66-67
Catalyst Recovery and Retention Sinterflo®FMetalFibreFilterElement 14-17 Sinterflo® M Metal Mesh Filter Element 20-23 Sinterflo®PPowderFilterElement 18-19
Catheter Valves and Vents BioVyonTM Porous Plastic 170-171
Cellulose Acetate Fibre Production Candle Filters 26 RempakTM Candle Filters 27
Chemical Production AquafilTM 54-55 BiofilTM II 56-57 BiofilTM Junior 78-79 ChemifilTM 60-61 FluorofilTM 62-63 FluorofilTM F100 66-67 FluorofilTM Junior 80-81 HydrofilTM 68-69
C
KlearfilTM 42-43 MicrofilTM 44-45 PolyfilTM II 46-47 PolyfilTM Junior 76-77 Sinterflo®FMetalFibreFilterElement 14-17 Sinterflo® M Metal Mesh Filter Element 20-23 Sinterflo®PPowderFilterElement 18-19 Sinterflo® P Porous Powder Cylinders 145 TekfilTM 48-49 Vyon®FluidizingMedia 134-135 Chromatography (seeAnalyticalChromatographyandSolidPhase
ExtractionSamplePreparation)
Clarification BiofilTM II 56-57 BiofilTM Junior 78-79 BiofilTM Plus 58-59 HydrofilTM 68-69 KlearfilTM 42-43 PolyfilTM II 46-47 TrapfilTM 52-53
Coatings MicrofilTM 44-45 PolyfilTM II 46-47 PolyfilTM Junior 76-77 TekfilTM 48-49 TekfilTMGV 50-51
Coolant Filtration Differential Pressure Indicators 161 In-LineElementsandScreens 95 PleatedElements(Aerospace) 28,37
Cosmetics BiofilTM II 56-57 FluorofilTM 62-63 KlearfilTM 42-43 MicrofilTM 44-45 PolyfilTM II 46-47 Sinterflo® P Porous Powder Cylinders 145 TekfilTM 52-53
Compressed Air FluorofilTM 62-63 PolyfilTM II 46-47
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
194
CONTENTS INDEXORDERING INFORMATIONPRODUCTSINTRODUCTION
Ind
ex
by
Ap
plic
atio
n
Dairy BiofilTM II 56-57 FluorofilTM 62-63 FluorofilTM Plus 64-65 KlearfilTM 42-43 MicrofilTM 44-45 PolyfilTM II 46-47 Sinterflo®FMetalFibreFilterElement 14-17 Sinterflo® M Metal Mesh Filter Element 20-23 Sinterflo®PPowderFilterElement 18-19
Data Storage (Hard Disk Drive) AquafilTM 54-55 BiofilTM II 56-57 ChemifilTM 60-61 FluorofilTM 62-63 GasProTMHighPurityTeflonFilters 110-111 GasProTMSinterflo® F Gas Filters 108-109 GasProTMSinterflo®PGasketFilters 106-107 HydrofilTM 68-69 PolyfilTM II 46-47
De-watering Spargers 147
Diagnostics BioVyonTM Porous Plastic 170-171
Diffusers Sinterflo® P Sintered Metal Powder 165
Drug Delivery BioVyonTM Porous Plastic 170-171
Dust Filtration Vyon® Porous Plastic 168-169 Sinterflo®FMetalFibreFilterElements 20-23
Effluent Aeration (SeeWastewaterTreatment)
Electronics AquafilTM 54-55 BiofilTM II 56-57 BiofilTM Junior 78-79 FluorofilTM 62-63 HydrofilTM 68-69 PolyfilTM II 46-47 PolyfilTM Junior 76-77
D
E
Embarkation Water Supply CryptofilTM 40-41
Emanation Vyon® Sintered Porous Plastic 168-169 BioVyonTM Porous Plastic 170-171
Ethylene Vinyl Alcohol Sinterflo®MMetalMeshFilterElements 20-23
Fermentation BiofilTM Plus 58-59 HydrofilTM Plus 70-71 FluorofilTM Plus 64-65 KlearfilTM 42-43 PolyfilTM II 46-47 Spargers 147
Fine Chemicals AquafilTM 54-55 BiofilTM II 56-57 BiofilTM Junior 78-79 ChemifilTM 60-61 FluorofilTM 62-63 FluorofilTM F100 66-67 FluorofilTM Junior 80-81 HydrofilTM 68-69 KlearfilTM 42-43 PolyfilTM II 46-47 PolyfilTM Junior 76-77 TekfilTM 48-49
Flame Arresting BatteryVentsandFlameArrestors 144 Porous Cups and Bushings 146 Sinterflo® P Sintered Metal Powder 165 Vyon® Porous Plastics 168-169
Flat Panel Display AquafilTM 54-55 BiofilTM II 56-57 ChemifilTM 60-61 FluorofilTM 62-63 GasProTMHighPurityTeflonFilters 110-111 GasProTMSinterflo® F Gas Filters 108-109 GasProTMSinterflo®PGasketFilters 106-107 HydrofilTM 68-69 PolyfilTM II 46-47
F
Contact Information: UK, Segensworth Division US, Ashland Division Tel:+44(0)1489864330 Tel:+18045501600 Email:[email protected] Email:[email protected]
195
Flow Restrictors BatteryVentsandFlameArrestors 144 In-lineElementsandScreens 95 Metal Powder Filter Discs 94 Porous Cups and Bushings 146 Sinterflo® P Sintered Metal Powder 165 Fluidisation Sinterflo® MC Fluidising Media 132-133 Sinterflo® P Metal Powder Aeration Units 130-131 Vyon®FluidizingMedia 134-135
Food Processing BiofilTM II 56-57 CryptofilTM 40-41 KlearfilTM 42-43 MicrofilTM 44-45 PolyfilTM II 46-47 Sinterflo® P Porous Powder Cylinders 145 TekfilTM 48-49 Vyon®FluidizingMedia 134-135
Fragrance Emanation (seeEmanation)
Frits BioVyonTM Porous Plastic 170-171 Sinterflo® P Sintered Metal Powder 165 Vyon® Porous Plastic 168-169
Fruit Juices FluorofilTM 62-63 KlearfilTM 42-43 StabifilTM 156-157 VinofilTM 72-73
Fuel Systems In-LineElementsandScreens 95 Differential Pressure Indicators 161 PleatedElements(Aerospace) 28,37
Gas Filtration ChemifilTM 60-61 FluorofilTM 62-63 FluorofilTM F100 66-67 FluorofilTM Junior 80-81 Metal Powder Filter Discs 94 PleatedElements(Aerospace) 28,37 Sinterflo®FMetalFibreFilterElement 14-17
G
Sinterflo®MCFluidizingMedia 132-133 Sinterflo®MMetalMeshFilterElement 20-23 Sinterflo®PMetalPowderFilterElement 18-19 Sinterflo® P Porous Powder Cylinders 145
Gasification Sinterflo®FMetalFibreFilterElement 14-17 Sinterflo®MMetalMeshFilterElement 20-23 Sinterflo®PMetalPowderFilterElement 18-19
Guard Filtration PolyfilTM II 46-47 TrapfilTM 52-53
High Purity Gas Filtration FluorofilTM 62-63 Sinterflo®FMetalFibreFilterElement 14-17 Sinterflo®PMetalPowderFilterElement 18-19 GasProTMHighPurityTeflonFilters 110-111
Hydraulics Differential Pressure Indicators 161 In-LineElementsandScreens 95 Metal Fibre Filter Discs 93 Metal Mesh Filter Discs 94 PleatedElements(Aerospace) 28,37
Ink Bullet Filter 118 FinalInkfilter 98 Grid Filter and O-ring 103 In-LineElementsandScreens 95 In-LineFilter(PEEK) 119 In-LineFilter(UV) 120 KlearfilTM 42-43 LastChanceInkjetFilter 121 MicrocapTM 124 MicrodiscTM 1PA 112 MicrodiscTM 2PA 113 MicrodiscTM 3PS 114 MicrodiscTM 4PS 115 MicrodiscTM4PV 116 MicrodiscTM 7PS 117 MicrojetTM 126 MicroprintTM 125 PleatedUnrimmedDiscFilter 100
H
I
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
196
CONTENTS INDEXORDERING INFORMATIONPRODUCTSINTRODUCTION
Ind
ex
by
Ap
plic
atio
n
PolyfilTM II 46-47 PolyfilTM Junior 76-77 TekfilTM 48-49 TekfilTMGV 50-51
Inkjet (seeInk)
Large Volume Parenterals BiofilTM Plus 58-59 HydrofilTM Plus 70-71
Life Science BiofilTM II 56-57 BioVyonTM Porous Plastic 170-171 Sinterflo® P Sintered Metal Powder 165
Liquid Filtration Metal Fibre Filter Discs 93 Metal Mesh Filter Discs 92 PleatedElements(Aerospace) 28,37 Sinterflo®MCMetalCompositeFilterElement 24-25 Sinterflo®PMetalPowderFilterElement 18-19 Sinterflo® P Porous Powder Cylinders 145
Lubricating Oil Differential Pressure Indicators 161 In-LineElementsandScreens 95 Metal Fibre Filter Discs 93 PleatedElements(Aerospace) 28,37
Media Retention (Desiccants) Sinterflo® P Metal Powder 165
Medical Device Filtration (seeBioscience)
Metal Finishing TekfilTM 48-49
Microelectronics AquafilTM 54-55 BiofilTM II 56-57 ChemifilTM 60-61 FluorofilTM 62-63 GasProTM GasketFilters 104-105
L
M
GasProTM Sinterflo® P Powder Filters 106-107 GasProTMHighPurityTeflonFilters 110-111 GasProTMSinterflo® F Gas Filters 108-109 GasProTM Restrictive Flow Products 140-141 GasProTMChamberVentDiffuserFilters 142-143 HydrofilTM 68-69 PolyfilTM II 46-47
Milk (seeDairy)
Mineral Water BiofilTM II 56-57 CryptofilTM 40-41 FluorofilTM 62-63 FluorofilTM Plus 64-65 KlearfilTM 42-43 MicrofilTM 44-45 PolyfilTM II 46-47 VinofilTM 72-73
Mining Sinterflo®MMetalMeshFilterElements 20-23
Nylon Production Candle Filters 26 RempakTM Candle Filters 27
Oil and Lubrication Systems In-LineElementsandScreens 93 PleatedElements(Aerospace) 28,37
Ophthalmic Solution BiofilTM II 56-57 BiofilTM Junior 78-79 BiofilTM Plus 58-59 PolyfilTM Junior 76-77
Oxygen Service BioVyonTM Porous plastic 170-171 Metal Fibre Filter Discs 93 Metal Powder Filter Discs 94 Sinterflo® P Sintered Metal Powder 165
N
O
Contact Information: UK, Segensworth Division US, Ashland Division Tel:+44(0)1489864330 Tel:+18045501600 Email:[email protected] Email:[email protected]
197
Particulate Filtration AquafilTM 54-55 KlearfilTM 42-43 MicrofilTM 44-45 PolyfilTM II 46-47 PolyfilTM Junior 76-77 TekfilTM 48-49 TrapfilTM 52-53
PEEK Production Leaf Discs 32
Pharmaceutical BiofilTM II 56-57 BioVyonTM Porous Plastic 170-171 FluorofilTM 62-63 KlearfilTM 42-43 MicrofilTM 44-45 MicrofilTM Junior 74-75 PolyfilTM II 46-47 PolyfilTM Junior 76-77 Sinterflo® P Porous Powder Cylinders 145 Photographic Chemicals KlearfilTM 42-43 TekfilTM 48-49
Photoresists ChemifilTM 60-61 FluorofilTM 62-63 FluorofilTM F100 66-67 FluorofilTM Junior 80-81 HydrofilTM 68-69
Photovoltaics (seeSolar)
Pneumatic Equipment In-LineElementsandScreens 95 Vyon® Silencers 148-149 Sinterflo® P Metal Powder 165 Union Filters and Miniature Housings 96 Vyon® Porous Plastic 168-169
Polycarbonate Film Production Candle Filters 26 RempakTM Candle Filters 27 Solid Plate Leaf Disc Filters 33
Polyester Fibre Production
P Candle Filters 26 RempakTM Candle Filters 27
Polyester Film Production Candle Filters 26 Leaf Disc Filter 32 RempakTM Candle Filters 27
Polymer Melt Candle Filters 26 Leaf Disc Filters 32 RempakTM Candle Filters 27 Sinterflo®PMetalPowderFilterElement 18-19
Potable Water Filtration BiofilTM II 56-57 CryptofilTM 40-41 MicrofilTM 44-45 VinofilTM 72-73 Vyon® Tubular Diffusers 153
Powder Handling FluorofilTM Plus 64-65 Sinterflo® P Metal Aeration Units 130-131 Vyon®FluidizingMedia 134-135
Pressure Snubber Vyon® Silencers 148-149 GasProTM Restrictive Flow Products 140-141 Sinterflo® P Metal Powder 165
Printing Inks Bullet Filter 118 FinalInkfilter 98 Grid Filter and O-ring 103 In-LineFilter(UV) 120 In-LineElementsandScreens 95 In-LineFilter(PEEK) 119 KlearfilTM 42-43 LastChanceInkjetFilters 121 MicrocapTM 124 MicrodiscTM 1PA 112 MicrodiscTM 2PA 113 MicrodiscTM 3PS 114 MicrodiscTM 4PS 115 MicrodiscTM4PV 116 MicrodiscTM 7PS 117 MicrojetTM 126 MicroprintTM 125 PleatedUnrimmedDiscFilter 100 PolyfilTM II 46-47 PolyfilTM Junior 76-77
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
198
CONTENTS INDEXORDERING INFORMATIONPRODUCTSINTRODUCTION
Ind
ex
by
Ap
plic
atio
n
TekfilTM 48-49 TekfilTMGV 50-51
Process Chromatography BioVyonTM Porous Plastic 170-171 Metal Mesh Filter Discs 92 Metal Powder Filter Discs 94
Process Gas FluorofilTM 62-63 FluorofilTM Plus 64-65 FluorofilTM Junior 80-81 Process Water Systems BiofilTM II 56-57 CryptofilTM 40-41 KlearfilTM 42-43 MicrofilTM 44-45 PolyfilTM II 46-47
Pure Water Supply AquafilTM 54-55 BiofilTM II 56-57 BiofilTM Plus 58-59 ChemifilTM 60-61 FluorofilTM 62-63 HydrofilTM 68-69 HydrofilTM Plus 70-71 VinofilTM 72-73
Sand Filtration Sinterflo® MC Filter Plates 132-133
Sea Water Sinterflo® MC Filter Plates 132-133
Semiconductors AquafilTM 54-55 BiofilTM II 56-57 ChemifilTM 60-61 FluorofilTM 62-63 GasProTM GasketFilters 104-105 GasProTM Sinterflo® P Powder Filters 106-107 GasProTMHighPurityTeflonFilters 110-111 GasProTMSinterflo® F Gas Filters 108-109 GasProTM Restrictive Flow Products 140-141 GasProTMChamberVentDiffuserFilters 142-143 HydrofilTM 68-69 PolyfilTM II 46-47
S
Sensor Protection BatteryVentsandFlameArrestors 129 Sinterflo® P Flow Restrictors 128 Sinterflo® P Sintered Metal Powder 151
Silencing Vyon® Silencers 148-149
Silicon (and Sapphire) Wafers AquafilTM 54-55 BiofilTM II 56-57 ChemifilTM 60-61 FluorofilTM 62-63 GasProTM GasketFilters 104-105 GasProTM Sinterflo® P Powder Filters 106-107 GasProTMHighPurityTeflonFilters 110-111 GasProTMSinterflo® F Gas Filters 108-109 GasProTM Restrictive Flow Products 140-141 GasProTMChamberVentDiffuserFilters 142-143 HydrofilTM 68-69 PolyfilTM II 46-47
Silo Construction Sinterflo® P Aeration Units 130-131
Soft Drink AquafilTM 54-55 BiofilTM II 56-57 ChemifilTM 60-61 FluorofilTM 62-63 KlearfilTM 42-43 PolyfilTM II 46-47 StabifilTM 156-157 VinofilTM 72-73 Solar AquafilTM 54-55 BiofilTM II 56-57 ChemifilTM 60-61 FluorofilTM 62-63 GasProTM GasketFilters 104-105 GasProTM Sinterflo® P Powder Filters 106-107 GasProTMHighPurityTeflonFilters 110-111 GasProTMSinterflo® F Gas Filters 108-109 GasProTM Restrictive Flow Products 140-141 GasProTMChamberVentDiffuserFilters 142-143 HydrofilTM 68-69 PolyfilTM II 46-47
Solvent Filtration ChemifilTM 60-61 FluorofilTM 62-63
Contact Information: UK, Segensworth Division US, Ashland Division Tel:+44(0)1489864330 Tel:+18045501600 Email:[email protected] Email:[email protected]
199
FluorofilTM F100 66-67 FluorofilTM Junior 80-81 HydrofilTM 68-69 PolyfilTM II 46-47 Porous Cups and Bushings 146 Sinterflo® P Porous Powder Cylinders 145 TekfilTM 48-49 Sound Attenuation Metal Powder Filter Discs 94 Porous Cups and Bushings 146 Vyon® Silencers 148-149 Sinterflo® P Sintered Metal Powder 165
Sparging Porous Cups and Bushings 146 Sinterflo®MCMetalMeshComposite 167 Sinterflo® P Sintered Metal Powder 165 Spargers 147
Spin Pack Filters Metal Fibre Filter Discs 92 Metal Mesh Filter Discs 92 Porous Cups and Bushings 146
Spirits BiofilTM II 56-57 KlearfilTM 42-43 PolyfilTM II 46-47 StabifilTM 156-157
Stabilisation BiofilTM II 56-57 FluorofilTM 62-63 FluorofilTM Junior 80-81 StabifilTM 156-157
Steam (Process and Culinary) Sinterflo®FMetalFibreFilterElement 14-17 Sinterflo®MMetalMeshFilterElement 20-23 Sinterflo®MCMetalCompositeFilterCartridge 24-25 Sinterflo®PMetalPowderFilterElement 18-19 Sinterflo® P Porous Powder Cylinders 145 Spargers 147
Sterile Product Storage Vessels FluorofilTM Junior 80-81 VentafilTM 82-83
Sterile Venting ChemifilTM 60-61
FluorofilTM 62-63 FluorofilTM Plus 64-65 FluorofilTM Junior 80-81 VentafilTM 82-83
Syringe Vent BioVyonTM Porous plastic 170-171
Table Water (SeeMineralWater)
Tabletting FluorofilTM Plus 64-65
Tanker Transfer BiofilTM II 56-57 KlearfilTM 42-43 PolyfilTM II 46-47
Toiletries and Cosmetics BiofilTM II 56-57 BiofilTM Plus 58-59 FluorofilTM 62-63 FluorofilTM Junior 80-81 KlearfilTM 42-43 PolyfilTM II 46-47 Sinterflo® P Porous Powder Cylinders 145 TekfilTM 48-49
Trap Filtration PolyfilTM II 46-47 TrapfilTM 52-53
Vaccines BiofilTM II 56-57 FluorofilTM 62-63 KlearfilTM 42-43 MicrofilTM 44-45
Vacuum Hold Down Tables Vyon® Porous Plastics 168-169 Sinterflo® P Metal Powder 165
Venting BatteryVentsandFlameArrestors 144 BioVyonTM Porous Plastics 170-171 FluorofilTM 62-63 Sinterflo®FMetalFibreFilterElement 14-17
T
V
Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
200
CONTENTS INDEXORDERING INFORMATIONPRODUCTSINTRODUCTION
Ind
ex
by
Ap
plic
atio
n
Sinterflo® MC Filter Plates 138-139 Sinterflo®MMetalMeshFilterElement 20-23 Sinterflo® P Sintered Metal Powder 165 VentafilTM 82-83
Vetinary Medication BiofilTM II 56-57 BiofilTM Plus 58-59 FluorofilTM 62-63 FluorofilTM Junior 80-81 FluorofilTM Plus 64-65 KlearfilTM 42-43 MicrofilTM 44-45 PolyfilTM II 46-47
Wastewater Treatment Spargers 147 TekfilTM 48-49 Vyon® Disc Diffusers 152 Vyon® Porous Plastic 168-169 Vyon® Tubular Diffuser 153
Water BiofilTM II 56-57 BiofilTM Plus 58-59 BiofilTM Junior 78-79 ChemifilTM 60-61 CryptofilTM 40-41 HydrofilTM 68-69 HydrofilTM Plus 70-71 MicrofilTM 44-45 PolyfilTM II 46-47 Sinterflo® MC Filter Plates 138-139 Spargers 147 StabifilTM 156-157 TekfilTM 48-49 VinofilTM 72-73 Vyon® Disc Diffusers 152 Vyon® Porous Plastic 168-169 Vyon® Tubular Diffuser 153
Water for Injection (seePureWaterSupply)
Water Treatment (seeWastewaterTreatment)
Wicking BioVyonTM Porous plastic 170-171 Metal Powder Filter Discs 94
W
Porous Cups and Bushings 146 Sinterflo® P Sintered Metal Powder 165 Vyon® Porous Plastic 168-169
Wine BiofilTM II 56-57 FluorofilTM 62-63 FluorofilTM Plus 62-63 KlearfilTM 42-43 MicrofilTM 44-45 PolyfilTM II 46-47 Sinterflo®PMetalPowderFilterElement 18-19 StabifilTM 156-157 VinofilTM 72-73
Contact Information: UK, Segensworth Division US, Ashland Division Tel:+44(0)1489864330 Tel:+18045501600 Email:[email protected] Email:[email protected]
201Contact Information: China, Wuhan Division India, Mumbai Division Tel:+86(0)7122878955 Tel:+912225976464/+912225976465 Email:[email protected] Email:[email protected]
Porvair Filtration Group Ltd.1 Concorde Close Segensworth,Fareham Hampshire,PO155RT,UKTel: +44(0)1489864330 Email:[email protected]
Porvair Filtration Group Inc.301 Business Lane Ashland,Virginia23005,USATel: +18045501600 Email:[email protected]
Porvair Filtration GroupChengdong Area SquareIndustrialPark,NorthDistrict XiaonanEconomicDevelopmentZone Xiaogan, 432000, ChinaTel: +86(0)7122878955 Email:[email protected]
Porvair Filtration India PVT. Ltd.Gangotri Glacier Annex, Kavesar OppositeVijayNagari,OffGhodbunderRoad Thane(W),400607,IndiaTel: +912225976464/+912225976465 Email:[email protected]
www.porvairfiltration.com
PFG008/Dec2014/Rev4:Feb2017
Porvair,Inprinta,SinterfloandVyonareregisteredtrademarksofPorvairplc.
Aquafil,Biofil,BioVyon,Carbofil,Chemifil,Cryptofil,Fluorofil,GasPro,Hydrofil,Klearfil,Microcap,Microdisc,Microfil,Microjet,Microprint,Polyfil,Rempak,Stabifil,Tekfil,Trapfil,VentafilandVinofilaretrademarksofPorvairplc.
AutoCADisaregisteredtrademarkofAutodeskInc.
BekaertisaprotectedtrademarkofN.V.BEKAERTS.A.
ChemrazisaregisteredtrademarkofGreene,TweedTechnologies,Inc.
DegrémontisatrademarkofDegrémont.
FecralloyisaregisteredtrademarkofSandvikIntellectualPropertyAB.
HastelloyisaregisteredtrademarkofHaynesInternationalInc.
InconelandMonelareregisteredtrademarksofSpecialMetalsCorporation.
JacoisaregisteredtrademarkofJacoManufacturingCompany.
RilsanisaregisteredtrademarkofARKEMA.
SwagelokisaregisteredtrademarkofSwagelokCompany.
TeflonisatrademarkofTheChemoursCompanyFC,L.L.C.
VitonisaregisteredtrademarkofDuPontPerformanceElastomersL.L.C.
© Copyright 2014. Porvair Filtration Group Ltd. All rights reserved.
Whilsteveryefforthasbeenmadetoensuretheaccuracyofthisdocument,duetocontinuousproductdevelopment,thedatacontainedissubjecttoconstantrevisionandPorvairFiltrationGroupLtd.reservestherighttochange,alterormodifyitscontents.