Figure 1: The GT-1000 Solar PV Technology Panel

Solar Panels (2)

DC Ammeters (2)

AC Ammeters (6)

Identify and inventory the components that make up the GT-1000 Solar Photovoltaic Installer training system at this point.

Fuse Holders and Fuses (2)

Disconnect Switches (2)

30 Amp/50 Amp Breakers (2)

Load Diverter/Regulator

(continued)

Grid Tie Inverter

Two-Row Electrical Connection Blocks (5)

Diverter Load Light (Red Light)

Identify and inventory the components that make up the GT-1000 Solar Photovoltaic Installer training system at this point. (continued)

Load Lights (2)

Master AC Power Switch

120 VAC Outlet

120 VAC On/Off Switches (2)

Figure 2: The Back of the GT-1000 Panel

Figure 3: Non-Mounted GT-1000 Solar PV Technology Panel Components

Photovoltaic Mounting Post

12V, 50W Photovoltaic Panels (2)

Horizontal Support Rails (2)

Identify and inventory the following non-mounted components. These components should be on hand and available for use at this time:

Mounting Clamps (2)

12V Rechargeable Batteries (4)

Protective Battery Case with Cover

Hand Held Digital Multimeter

(continued)

Variable Intensity Light Source

12V Rechargeable Batteries (4)

Identify and inventory the following non-mounted components. These components should be on hand and available for use at this time: (continued)

Wire (Black 18 AWG)

Wire (Red 18 AWG)

(continued)

Wire (Black 12 AWG)

Wire (Red 12 AWG)

12 and 18 AWG Crimp-on Fork Lug Connectors

Universal Side Mount Kit

Hose Clamps (2)

Identify and inventory the following non-mounted components. These components should be on hand and available for use at this time: (continued)

Bucket Mounting Piece

Left and Right Vertical Support Rails

Left and Right Mounting Clips