Fieldbus Direct - Festo · Fieldbus Direct For extremelycompact and space-saving communication ... 5 7 CP-E08-M12x2-CL † 8inputs24VDC † Signalstatusdisplayvia8LEDs † Operatingstatusdisplay

Fieldbus Direct

For extremely compact and space-saving

communication

Info 201

The ideal fieldbus solution

for confined spaces

Info 201 – Subject to change – 2008/042 � Internet: www.festo.com/catalogue/...

Fieldbus Direct and valve terminals

CPV, CPV-SC, CPA-SC and CDVI

10 years of CPV – and still way ahead of the competition.

The genesis of all compact valve terminals impresses with its unique construc-

tional design. From an electrical point of view, the CPV offers compact and cost-

effective fieldbus connections, selectable connection technology and, with the

CPI string extension, the integration of further valve terminals and I/O modules.

It also offers maximum process reliability thanks to integrated diagnostic op-

tions. From a pneumatic point of view, the CPV guarantees maximum flow rates

in the most compact of spaces.

New poppet valves New functionalities New interfaces CPV – the number 1

Impressively direct:

the pneumatic concept

The Fieldbus Direct system en-

compasses four valve terminal series:

CPV, CPV-SC, CPA-SC and CDVI. All

Compact Performance terminals are

modular, versatile and sturdy, making

them ideal for almost every require-

ment.

CPV: an optional pneumatic multiple

connector plate simplifies the in-

stallation of the pneumatic connec-

tions as well as permitting fast and

easy replacement during servicing.

The Clean Design version CDVI really

comes into its own in corrosive envi-

ronments.

Systematically decentralised

Up to four supplementary CPI modules

and CPI valve terminals ensure

shorter tubing lengths and faster cycle

rates.

Improved: the third generation of

CPV fieldbus interfaces

Improved performance and higher in-

tegration at a lower price. Even more

economical with small and medium

numbers of inputs/outputs.

Impressively direct:

the electrical concept

The first task involved in designing a

system is the control concept. This is

where the fieldbus system is defined.

The valve terminals CPV, CPV-SC,

CPA-SC and CDVI address the need for

pneumatic control concepts. Direct

actuation makes them compatible

with all of the most commonly used

fieldbus protocols: Profibus DP, Inter-

bus, DeviceNet, CANopen, AS-inter-

face®, IP-Link, CS31, CC-Link – all

with Festo plug & work®.

Impressively extendable:

The CPI string extension enables

further valve terminals and I/O mod-

ules to be connected to the Fieldbus

Direct valve terminals. A CPI string is

integrated in the fieldbus node as an

extension for up to 32 I/Os. The CPI

strings range from 0.5 to 10 metres in

length, which means that the modules

with selectable connection technology

can be mounted directly at the loca-

tion of use (thanks to IP65/IP67).

2008/04 – Subject to change – Info 201 3� Internet: www.festo.com/catalogue/...

Standardised:

the overall system

All modules, connecting cables and

accessory parts are fully compatible in

Fieldbus Direct valve terminals such

as the CPI installation system. Stand-

alone Fieldbus Direct valve terminals

from 8 … 48 I/Os or the CPI systems

with up to 512 I/Os are based on the

same technology.

Pure efficiency:

three master platforms

Your machine and installation con-

cepts define the platform:

depending on the fitting space you

want and the number of I/Os.

Regardless of the platform you choose,

all the systems are compatible down

to the last detail for maximum free-

dom when it comes to making im-

provements. Simplified logistics, pro-

curement and efficiency-increasing

services included. Thus you have any

number of options from 16 to 512

I/Os open to you. For an optimum sys-

tem design.

Integrated: process reliability

Pneumatic components, electrical

components and networking form a

synergy in valve terminals from Festo.

Thus pneumatic and electrical diag-

nostic information is available, which

is not the case with valve actuation

via I/O modules. The result? Valuable

additional information that opens up

new synergies. This is what is meant

by Festo’s condition monitoring sys-

tems (CMS) for maximum productivity.

The CPV provides information on, for

example:

• Critical undervoltages for valves

• Short circuits

• String short circuit

• Configuration errors

Fieldbus Direct: decentralised “on-

site” installation system for 8 …48

I/Os

CPI system: for extended decentra-

lised installation of up to 128 I/Os

CPX system: for centralised installa-

tion of up to 512 I/Os


Fieldbus DirectKey features

The system

• Extremely compact and space-

saving design

• Low-cost solution for the connection

of a small number of valves to a

fieldbus

• Extremely safe, protection class up

to IP65 depending on the series

The Fieldbus Direct system comprises

four valve terminal series:

• CPV (type 10)

• CPV-SC (type 80)

• CPA-SC (type 82)

• CDVI (type 15)

The Fieldbus Direct product range is

the most compact way of connecting

valves to a fieldbus. The fieldbus

node is directly integrated in the

electrical actuation of the valve

terminal and therefore takes up only

a minimal amount of space.

Fieldbus Direct is a system for the

connection of one valve terminal to

nine different fieldbus standards.

The most important systems includ-

ing Profibus, Interbus, DeviceNet and

CANopen are supported.

The CP string extension option allows

the functions and components of the

CPI installation system to be used.

The optional string extension allows

additional valve terminals and I/O

modules to be connected to the

fieldbus node of the Fieldbus Direct

system.

The I/O modules and cables for the

CP string extension are ordered using

the order code for the CPI installation

system.

The maximum length of the CP string

extension is 10 metres, which means

that the extension modules can be

mounted directly on-site. All of the

required electrical signals are

transmitted via the CPI cable, which

means that no further installation is

needed on the extension module.



Valve terminal configurator Online via:� www.festo.com

Selecting a CPV-SC valve terminal

using the online catalogue is quick

and easy thanks to the convenient

valve terminal configurator provided.

This makes it much easier for you to

find the right product. The valve

terminals are assembled according to

your order specifications and are

individually tested. This reduces the

amount of assembly and installation

to a minimum. The valve terminal

type 80 is ordered using the order

code.

Ordering system:

� Internet: type 80

The illustration above provides an

example of a valve terminal

configuration.

The following steps explain how you

arrive at the order code:

Once you have called up the Festo

home page (www.festo.com), click on

“Automation” and select the “Cata-

logue” from the “Products” submenu;

this will take you directly to the home

page of the catalogue. Then select

“Valve terminals” and “Universal

valve terminals”.

Choose the valve terminal you want

(CPV-SC in this case) and click on the

link “Configure common options”. You

can then configure the valve terminal

step by step (from right to left) accord-

ing to your requirements. Click on the

shopping basket to save the selected

configuration (this does not create an

order).

You can switch to expert mode at any

time by clicking on “Next” and using

the “Further options” link. This

provides you with extended options

for configuring your valve terminal.

2D/3D CAD data Online via:� www.festo.com

You can request the CAD data for a

valve terminal you have configured. To

do so, perform the product search as

described above. Go to the shopping

basket and click on the CAD icon

(compass). On the next page you can

generate a 3D preview or request

another data format of your choice by

e-mail.



Switch module for CPV Direct

The bus parameters and the device

configuration of CPV Direct are set

using the removable switch module.

The integrated DIL switches are easy to

set and check, even if the mounting

position is difficult to access.

In the case of the valve terminals with

the CP system according to Specifica-

tion “B”, the DIL switches for para-

meterisation/configuration are

integrated in the basic electrical unit.

CP string extension

The optional string extension allows

an additional valve terminal and I/O

modules to be connected to the field-

bus nodes of the Fieldbus Direct sys-

tem. A CP string of the CP installation

system is integrated in the fieldbus

node as an extension. Different input

and output modules as well as CPV,

CPA, MPA and CPV-SC valve terminals

can be connected.

The maximum length of the CP string

extension is 10 metres, which means

that the extension modules can be

mounted directly on-site. All of the

required electrical signals are trans-

mitted via the CP cable, which in turn

means that no further installation is

needed on the extension module.

The CP string interface offers:

• 16 input signals

• 16 output signals for output

modules 24 V DC or solenoid coils

• Logic and sensor supply for the

input modules

• Load voltage supply for the valve

terminals

• Logic supply for the output modules

The variant according to Specification

“B” supports the connection of

• 32 inputs

• 32 outputs 24 V DC or solenoid

coils.

It goes without saying that the CP

modules without Specification “B”

can also be connected to the CPI

string extension of valve terminals.

CPV Direct with fieldbus node

Fieldbus • 8 valve slices

• 16 solenoid coils

• 16 3/2-way valves

CPV Direct with input module 24 V DC for detecting the cylinder end positions

Fieldbus• 8 valve slices with up to

16 solenoid coils

• 16 inputs M8 or M12, each with

sensor supply

Variant according to Specification

“B”

• 32 input signals

• 32 output signals/solenoid coils


Fieldbus DirectKey features – Bus connection

Fieldbus Direct system diagnostics

The fieldbus node together with the

modules connected to the CP string

offer several diagnostic options.

Diagnostic LEDs on the Fieldbus

Direct node

The fieldbus-specific LEDs display the

communication status and the

fieldbus function.

Further LEDs display the power supply

status of all connected modules as a

common message.

• Undervoltage

• Short circuit

• Interruption of voltage

Diagnostic LEDs on the CP extension

modules

LEDs on the individual CP/CPI

modules display the current status of

the switching signals of the inputs or

outputs. Additional LEDs display short

circuits or overload of the power

supply and communication faults on

the CP connection.

Diagnostic messages via the fieldbus

All available diagnostic information is

transferred to the fieldbus node by

means of the CP connection. This

means that the diagnostic information

for the entire device can be

transferred to the fieldbus master.

• Configuration errors

• Short circuit/overload of an output

module

• Short circuit/undervoltage of the

sensor supply

• Undervoltage/load voltage of the

valves

• Interruption of a CP string to one of

the CP modules

Fieldbus

1

2

3

6

4

5

4

1 Diagnostics via fieldbus

2 Bus-specific LED

3 Diagnostics via LED on the

CP/CPI module

4 Diagnostics via CP string

5 Status display on the CP/CPI

module

6 Status display on the valve

terminal


Fieldbus DirectOverview of examples

Connection options

CPA-SC

Fieldbus CPASC valve terminals with fieldbus

interfaces can be equipped with 4

to 24 valve positions and 4 to

32 solenoid coils.

Designs

• DeviceNet connection

• Profibus connection

• 4 to 32 solenoid coils

CPV-SC

Fieldbus CPVSC1 valve terminals with fieldbus

interfaces can be equipped with 4

to 16 valve positions and 4 to

16 solenoid coils.

Designs


• Profibus connection


CDVI

In

Out

1

3

5

7

0

2

4

6

Fieldbus CDVI-DN valve terminals with fieldbus

interfaces can be equipped with 4, 6,

8 or 12 valve positions and 4 to 24

solenoid coils.

Designs




Fieldbus DirectOverview of examples

Valve terminals with CP interface

CPV valve terminal

CPV10

CPV14

CPV18

• Max. 16 valves in 8 valve slices

• Highly compact and space-saving

• Width 10, 14, 18 mm

• Nominal flow rate

400/800/1600 l/min

• CPV10, CPV14 and CPV18 with CPI

functionality

Further information


MPA valve terminal

MPA1

MPA2

• Max. 32 valves

• Modular and versatile

• Width 10, 20 mm

• Nominal flow rate 360/700 l/min

• CPI functionality

Further information


CPV-SC valve terminal

CPV-SC • Max. 16 valves

• Extremely compact

• Width 10 mm

• Nominal flow rate 170 l/min

• CPI functionality

Further information


CPA valve terminal

CPA10

CPA14

• Max. 16 valves

• Width 10, 14 mm

• Nominal flow rate 300/600 l/min

• CP functionality

Further information



Fieldbus DirectPeripherals overview

CP/CPI installation system input/output modules

CP-E16-M12x2-5POL

CP-E16N-M12x2-5POL

• 16 inputs 24 V DC

• Signal status display via 16 LEDs

• Operating status display

• M12 socket, double allocation

• 1x M9 CP/CPI connection

• PNP/NPN, IP65

CP-E16-M8

CP-E16N-M8

• 16 inputs 24 V DC



• M8 socket, single allocation

• 1x M9 CP connection

• PNP/NPN, IP65

CP-E16-M8-Z • 16 inputs 24 V DC



• Electrical isolation through

additional power supply



• Separate sensor supply

• PNP/NPN, IP65

CP-A08-M12-5POL

CP-A08N-M12

• 8 outputs 24 V DC

• Output signal display via 8 LEDs




• Separate load voltage

• Outputs resistant to overloads and

short circuits

• PNP/NPN, IP65

Detailed description of input and

output modules

� Internet: cpi



CP/CPI Compact Line input/output modules

In

Out

1

3

5

7

CP-E08-M12x2-CL • 8 inputs 24 V DC



• 4x M12 socket, 5-pin,

double allocation


• PNP, IP65/67

In

Out

1

3

5

7

0

2

4

6

CP-E08-M8-CL • 8 inputs 24 V DC




single allocation


• PNP, IP65/67

CP-E16-KL-CL • 16 inputs 24 V DC

• Indirect signal status display via

LEDs in the connection set of the

tension-spring socket


• Screw terminal or tension-spring

sockets


• PNP, IP20

CP-A04-M12x2-CL • 4 outputs 24 V DC




double allocation



short circuits

• PNP, IP65/67


output modules

� Internet: cpi



CP/CPI Eco Line input/output modules

CP-E16-M8-EL • 16 inputs 24 V DC

• Signal status display via LEDs



double allocation


• PNP





single allocation


• PNP




• 16x M8 socket, 4-pin


• PNP

CP-A08-M12-EL-Z • 8 outputs 24 V DC




double allocation



short circuits

• PNP


output modules

� Internet: cpi

CP connecting cable

The CP string is connected using pre-

assembled CP cables, which are sup-

plied in lengths from 0.5 to 8 metres.


Fieldbus Direct, CPV-DI01Technical data – Fieldbus node CPV-DI01

CPV fieldbus node for communication

between a CPV valve terminal and a

fieldbus master. The fieldbus node is

used for activation of a CPV valve

terminal with 8 valve slices and

16 solenoid coils and for displaying

the switching status via LED. The

CPV-… valves are activated via auto-

matic current reduction, which results

in less power consumption and heat

emission. 16 digital inputs and

8 digital outputs or 16 valves can be

connected via a serial CP string

extension.

DI01 supports 4 different fieldbus

protocols, which are selected by

means of DIL switches:

• Profibus DP

• Moeller SUCOnet K

• ABB CS31

• Festo fieldbus

The CPV fieldbus node is available in

three sizes, with identical perform-

ance characteristics:

• CPV10

• CPV14

• CPV18

Application

Bus connection

M12 adapterSub-D socket Sub-D socket

• 9-pin Sub-D socket

• Installation with IP65 protection

The bus connection is established via

a 9-pin Sub-D socket with a typical

Profibus allocation (to EN 50 170).

The bus connector plug (with protec-

tion class IP65 from Festo or IP20

from other manufacturers) facilitates

the connection of an incoming and an

outgoing bus cable. An active bus

terminal can be connected using the

integrated DIL switch. The Sub-D inter-

face is designed for the activation of

network components via a fibre optic

cable connection.

M12 adapter

• Plug connector 2xM12


Alternatively the bus connection can

be established via a 2x M12 adapter

(B-coded).



General technical data

Type CPV10-GE-DI01-8 CPV14-GE-DI01-8 CPV18-GE-DI01-8

Part No. 165 809 165 811 165 813

Fieldbus interface Either

• Sub-D socket, 9-pin

• Socket and plug, M12x1, 5-pin, B-coded

Electrical isolation of the fieldbus interface Via optocoupler

Baud rates [kbps] 9.6 … 12,000; automatic detection

Addressing range Profibus DP (12 MBaud)

Festo fieldbus

ABB CS31

Moeller SUCONET K

1 … 125;

set using a switch module

CP/CPI string extension Yes

16 inputs and 8 outputs (or 16 valves)

LED display (bus-specific) BUS Communication and configuration errors

LED display Product-specific Valve switching statusp y

Power Operating voltage for electrics and load supply

Product identification Product family 4: Valves

Ident. number 0xC9

Type of communication Cyclical communication

Configuration support GSD file and bitmaps

Max. no. of solenoid coils 16

Max. no. of solenoid coils with string extension 32

Max. no. of outputs 8 (1x16 solenoid coils omitted)

Max. no. of inputs 16

Device-specific diagnostics • Short circuit/overload of outputs

• Undervoltage of valves

• Undervoltage of outputs

• Undervoltage of sensor supply

• Missing module on CP/CPI string extension

• Via device-specific diagnostics (DPVO)

Operating voltage Nominal value [V DC] 24, reverse polarity protectedp g g

Permissible range [V] 20.4 … 26.4

Residual ripple [Vss] 4

Power failure bridging [ms] 10

Current consumption [mA] Max. 100 + sensor supply

Protection class to EN 60529 IP65

Materials Housing Die-cast aluminium

Cover Reinforced polyamide

Seal Nitrile rubber

Dimensions � Internet: type 10

Weight

yp

Technical data on valves



Operating and environmental conditions

Ambient temperature [°C] –5 … +50

Storage temperature [°C] –20 … +70

Fieldbus certification PNO

ATEX specification II 3 GD EEx nA II T5 T 80°C X

ATEX ambient temperature –5°C ≤ Ta ≤ +50°C

Certification cULus recognized (OL)

CE symbol (see declaration of conformity) • In accordance with EU EMC directive

• In accordance with EU explosion protection directive (ATEX)

Connection and display components

1

2

4

3

1 Red LED: Bus status/error (BUS)

2 Green LED: Power supply

(POWER)

3 Yellow LED row: For pilot solenoid

coils 12

4 Yellow LED row: For pilot solenoid

coils 14



Pin allocation for fieldbus interface (viewed on plug)

Pin Festo Sub-D Manufacturer-specific signal designation

plug (IP65) Festo fieldbus ABB CS31 PROFIBUS DP Moeller SUCONET K

interface

3

Sub-D 9-pin DIN (round)

5-pin

1 – – – n.c. – –

2 – – – n.c. – –

3 B S+ Bus1 RxD/TxD-P 3 (TA/RA) 4 (TA/RA)

4 – – – CNTR-P – –

5 – – – DGND – –

6 – – – VP – –

7 – – – n.c. – –

8 A S- Bus2 RxD/TxD-N 7 (TB/RB) 1 (TB/RB)

9 – – – n.c. – –

Housing Cable clip Screened Screened Screened 4 (screened) Housing

Pin allocation for M12 adapter

Profibus DP

(signal)

Bus In (pin) Bus Out (socket) Description

Screened M12 and 5 M12 and 5 Screened or functional earth

RxD / TxD-P 4 4 Data B

DGND – 3 Reference potential to supply

voltage positive (VP)

VP (P5V) – 1 Supply voltage positive

RxD / TxD-N 2 2 Data A


Fieldbus Direct, CPV-DI01Accessories – Fieldbus node CPV-DI01

Ordering data

Designation Type Part No.

Power supply

Power supply socket, straight, M12, 4-pin FBSD-GD-7 18 497

FBSD-GD-9 18 495

Power supply socket, angled, 4-pin FBSD-WD-7 18 524

FBSD-WD-9 18 525

Fieldbus connection

Fieldbus socket, Sub-D connection FBS-SUB-9-GS-DP-B 532 216

Connecting screws for standard Sub-D (IP20) UNC-4-40/M3x5 340 960

Bus connection Micro Style M12

Bus connection Micro Style, 2xM12 FBA-2-M12-5POL-RK 533 118

Fieldbus socket for Micro Style connection, M12, 5-pin, straight FBSD-GD-9-5POL 18 324

Plug for Micro Style connection, M12, 5-pin, straight FBS-M12-5GS-PG9 175 380

Valve terminal connection

Connecting cable, angled plug, angled socket 0.25 m KVI-CP-3-WS-WD-0,25 540 327g , g p g, g

0.5 m KVI-CP-3-WS-WD-0,5 540 328

2 m KVI-CP-3-WS-WD-2 540 329

5 m KVI-CP-3-WS-WD-5 540 330

8 m KVI-CP-3-WS-WD-8 540 331

Connecting cable, straight plug, straight socket 2 m KVI-CP-3-GS-GD-2 540 332g , g p g, g

5 m KVI-CP-3-GS-GD-5 540 333

8 m KVI-CP-3-GS-GD-8 540 334

User documentation

User documentation for CPV Direct, CPV fieldbus node German P.BE-CP-DI01-DE 165 816,

DI01 English P.BE-CP-DI01-EN 165 817

Italian P.BE-CP-DI01-IT 165 818

French P.BE-CP-DI01-FR 165 819

Spanish P.BE-CP-DI01-ES 165 820

Swedish P.BE-CP-DI01-SV 165 821


Fieldbus Direct, CPV-DI02-8Technical data – Fieldbus node CPV-DI02-8

CPV fieldbus node according to the CP

system with Specification “B” for

communication between a CPV valve

terminal and a fieldbus master. The

fieldbus node is used for activation of

a CPV valve terminal with 8 valve

slices and 16 solenoid coils and for

displaying the switching status via

LED. The CPV-… valves are activated

via automatic current reduction,

which results in less power consump-

tion and heat emission. 32 digital in-

puts and outputs or 32 solenoid coils

can be connected via a serial CP string

extension.




• CPV10

• CPV14

• CPV18

Application

Bus connection

Plug connector

2xM12

Screw terminals Sub-D

fieldbus plug

Sub-D socket




a 9 pin Sub-D socket with a typical

Profibus allocation (to EN 50170). The

bus connector plug (with protection

class IP65 from Festo or IP20 from

other manufacturers) facilitates the

connection of an incoming and an






cable connection.

M12 adapter





(A-coded).

Screw terminals

• 5-pin screw terminal strip

for installation in protected environ-

ments (IP20). The bus connection is

established via a 5-pin row. If the

valve terminal is ordered with this bus

connection, the 5-pin screw terminal

strip will also be supplied. It is

designed with double screw terminals

for the incoming and the outgoing bus

cable. This connection technology

provides a T-distributor function.

-V- New




Type CPV10-GE-DI02-8 CPV14-GE-DI02-8 CPV18-GE-DI02-8

Part No. 546 188 546 190 546 192

Fieldbus interface Either • Screw terminal strip, 5-pin


• Socket and plug, M12x1, 5-pin, B-coded

CP string extension Yes

32 inputs and 32 outputs

Baud rates [kbps] 9.6 … 12,000;

automatic detection

Addressing range Profibus DP (12 MBaud) 1 … 125;


LED display Bus-specific Communication and configuration errorsp y

Product-specific Valve switching status


Ident. number 0xC9




48 with string extension

Max. no. of outputs 16 solenoid coils and 32 outputs


LED diagnostic displays POWER Operating voltage for electronics and load supplyg p y

BUS Communication and configuration errors





• Missing module on CP string extension







Protection class to EN 60529 • IP20 with 5-pin screw terminal strip

• IP65 Sub-D, socket/plug M12x1

Fieldbus certification PNO


ATEX ambient temperature [°C] –5 ≤ Ta ≤ +50




Temperature range Operating voltage [°C] –5 … +50p g

Storage [°C] –20 … +70



Seal Nitrile rubber


Weight

yp


-V- New




1

2

4

3

1 Fieldbus connection

(9-pin Sub-D socket)

2 Removable switch cover

3 Operating/load voltage

connection (4-pin M12 plug)

4 Power LEDs (PS, PL) and bus

status LEDs (BF)

Pin allocation for PROFIBUS DP interface (viewed on plug)

Pin Signal Description

1 n.c. Not connected


3 RxD/TxD-P Received/transmitted data P

4 CNTR-P Repeater control signal

5 DGND Data reference potential (M5V)

6 VP Supply voltage positive (P5V)


8 RxD/TxD-N Received/transmitted data N


Housing Screened Connection to functional earth



1 VP Supply voltage positive (P5V)




5 FE Functional earth

-V- New


Fieldbus Direct, CPV-DI02-8Accessories – Fieldbus node CPV-DI02-8

Ordering data


Power supply

Power supply socket, straight, M12x1, 4-pin FBSD-GD-7 18 497

FBSD-GD-9 18 495

Power supply socket, angled, M12x1, 4-pin FBSD-WD-7 18 524

FBSD-WD-9 18 525

Fieldbus connection


M12 adapter FBA-2-M12-5POL 525 632


Bus connection, 5-pin screw terminal strip

Open Style adapter for 5-pin terminal strip FBA-1-SL-5POL 525 634

5-pin terminal strip FBSD-KL-2x5POL 525 635



0.5 m KVI-CP-3-WS-WD-0,5 540 328

2 m KVI-CP-3-WS-WD-2 540 329

5 m KVI-CP-3-WS-WD-5 540 330

8 m KVI-CP-3-WS-WD-8 540 331


5 m KVI-CP-3-GS-GD-5 540 333

8 m KVI-CP-3-GS-GD-8 540 334

User documentation


DI02-8 English P.BE-CP-DI02-EN 548 732





-V- New


Fieldbus Direct, CPASC-AE32-DPTechnical data – Fieldbus node CPASC-AE32-DP

CPASC fieldbus node for communica-

tion between a CPASC valve terminal

and a fieldbus master. The fieldbus

node is used for activation of a CPASC

valve terminal with up to 32 solenoid

coils on max. 24 valve positions.

The CPA-SC… valves are activated via

automatic current reduction, which

results in less power consumption

and heat emission. 32 digital inputs

and outputs can be connected via a

serial CP string extension.

Application

Bus connection



Profibus allocation (to EN 50170).

The bus connector plug facilitates the


outgoing bus cable. There is no

internal bus terminating resistor.

Condition monitoring

Condition monitoring supports pre-

ventative maintenance which is part

of the function chain in automation

systems.

Each valve is assigned a switching

cycle counter that automatically

registers movements of the system

components.

Once a maximum number of activa-

tions is reached, a message is sent to

the controller via Profibus and main-

tenance can be started. In the same

way condition monitoring supports

the determining of service intervals

for the function chain.

All movements immediately after

installation are registered.

-V- New


Fieldbus Direct, CPASC-AE32-DPTechnical data – Fieldbus node CPASC-AE32-DP


Type CPASC1-AE32-DP

Module No. 541 918

Fieldbus interface Sub-D socket, 9-pin

Electrical isolation of fieldbus interface Via optocoupler

Baud rate [kbps] 9.6 … 12,000; automatic detection

Addressing range 0 … 125

Set using a rotary switch



LED display (bus-specific) BF Bus fault

LED display (product-specific) PS Electronics supply, sensor supplyp y (p p )

PL Power supply for valves

SF CP/CPI system fault

Type of communication DPV0: Cyclical communication

Protocol Profibus

Configuration support EDS file and graphics symbol



• Short circuit/overload of inputs

• Undervoltage of valve terminal

• Undervoltage of valve terminal extension

• Undervoltage of output module


• Missing module on the CP/CPI string

• Condition monitoring

Parameterisation Via GSD file

Additional functions • Condition counter

• Tool change function







Materials Reinforced polyamide


Weight

yp





CE symbol (see declaration of conformity) In accordance with EU EMC directive

-V- New


Fieldbus Direct, CPASC-AE32-DPTechnical data – Fieldbus nodeCPASC-AE32-DP


6 5 47 3 2 1

1 Connection for CP extension

2 Connection for power supply

3 Connection for fieldbus

4 Earth terminal

5 DIL switch for CP extension

6 Rotary switch for station number

7 Cover (for IP40 protection)

Pin allocation for Profibus DP interface

Pin allocation Pin Signal Description

Sub-D plug socket on the valve terminal




4 CNTR-P1) Repeater control signal


6 VP Supply voltage (P5V)




Hous-

ing

Screened Connection to housing

1) The repeater control signal CNTR-P is realised as a TTL signal.

-V- New


Fieldbus Direct, CPASC-AE32-DPAccessories – Fieldbus nodeCPASC-AE32-DP

Ordering data


Power supply Micro Style M12

M12, 5-pin, straight socket (A-coded) FBSD-GD-9-5POL 18 324



0.5 m KVI-CP-3-WS-WD-0,5 540 328

2 m KVI-CP-3-WS-WD-2 540 329

5 m KVI-CP-3-WS-WD-5 540 330

8 m KVI-CP-3-WS-WD-8 540 331


5 m KVI-CP-3-GS-GD-5 540 333

8 m KVI-CP-3-GS-GD-8 540 334

User documentation

User documentation for valve terminal CPA-SC-DP and German P.BE-CPASC-CPVSC-DP-DE 548 725

CPV-SC-DP English P.BE-CPASC-CPVSC-DP-EN 548 726

French P.BE-CPASC-CPVSC-DP-FR 548 728

Italian P.BE-CPASC-CPVSC-DP-IT 548 729

Swedish P.BE-CPASC-CPVSC-DP-SV 548 730

Spanish P.BE-CPASC-CPVSC-DP-ES 548 727

-V- New


Fieldbus Direct, CPVSC1-AE16-DPTechnical data – Fieldbus node CPVSC1-AE16-DP

CPV-SC fieldbus node for communica-

tion between a CPV-SC valve terminal


node is used for activation of a

CPV-SC valve terminal with up to

16 solenoid coils on max. 16 valve

positions and for displaying the

switching status via LED.

The CPV-SC… valves are activated via




and outputs can be connected via a

serial CP string extension.

Application

Bus connection



Profibus allocation (to EN 50170).

The bus connector plug facilitates the


outgoing bus cable. There is no

internal bus terminating resistor.





systems.




components.



the controller via Profibus and main-







-V- New




Type CPVSC1-AE16-DP

Module No. 541 919

Fieldbus interface Sub-D socket, 9-pin


Baud rate [kbps] 9.6 … 12,000; automatic detection

Addressing range 0 … 125

Set using rotary switch


32 inputs and outputs

LED display (bus-specific) BF Bus fault

LED display (product-specific) PS Common message regarding power supplyp y (p p )


SF CP system fault

Type of communication DPV0: Cyclical communication

Protocol Profibus





• Undervoltage of valve terminal (extension)





Parameterisation Via GSD file

Additional functions • Condition counter

• Tool change function







Materials Polyamide


Weight

yp






-V- New




6

5 47 3 2 1

8






6 Earth terminal


8 Switching status display per

valve

Pin allocation for Profibus DP interface

Pin allocation Pin Signal Description

Sub-D plug socket on the valve terminal




4 CNTR-P1) Repeater control signal


6 VP Supply voltage (P5V)




Hous-

ing

Screened Connection to housing

1) The repeater control signal CNTR-P is realised as a TTL signal.

-V- New


Fieldbus Direct, CPVSC1-AE16-DPAccessories – Fieldbus node CPVSC1-AE16-DP

Ordering data



M12, 5-pin, straight socket (A-coded) FBSD-GD-9-5POL 18 324



0.5 m KVI-CP-3-WS-WD-0,5 540 328

2 m KVI-CP-3-WS-WD-2 540 329

5 m KVI-CP-3-WS-WD-5 540 330

8 m KVI-CP-3-WS-WD-8 540 331


5 m KVI-CP-3-GS-GD-5 540 333

8 m KVI-CP-3-GS-GD-8 540 334

User documentation

User documentation for valve terminal CPA-SC-DP and German P.BE-CPASC-CPVSC-DP-DE 548 725

CPV-SC-DP English P.BE-CPASC-CPVSC-DP-EN 548 726

French P.BE-CPASC-CPVSC-DP-FR 548 728

Italian P.BE-CPASC-CPVSC-DP-IT 548 729

Swedish P.BE-CPASC-CPVSC-DP-SV 548 730

Spanish P.BE-CPASC-CPVSC-DP-ES 548 727

-V- New


Fieldbus Direct, CPV-CS02-8Technical data – Fieldbus node CPV-CS02-8









LED. The CPV-… valves are activated

via automatic current reduction,

which results in less power consump-

tion and heat emission. 32 digital in-

puts and outputs or 32 solenoid coils

can be connected via a serial CP string

extension.


two sizes, with identical performance

characteristics:

• CPV10

• CPV14

Application

Bus connection

Plug connector

2xM12


fieldbus plug

Sub-D socket




a 9-pin Sub-D socket. The bus

connector plug (with protection class

IP65 from Festo or IP20 from other

manufacturers) facilitates the connec-

tion of an incoming and an outgoing

bus cable. An active bus terminal can

be connected using the integrated DIL

switch. The Sub-D interface is

designed for the activation of network

components via a fibre optic cable

connection.

M12 adapter





(B-coded).

Screw terminals












-V- New




Type CPV10-GE-CS02-8 CPV14-GE-CS02-8

Part No. 546 194 546 196

Fieldbus interface • Sub-D socket, 9-pin



32 inputs and outputs

Baud rates [kBaud] 187.5

Permanently set

Addressing range ABB CS31 0 … 60;








LED display Bus-specific Communication and configuration errorsp y

Product-specific Valve switching status






• Missing module on the CP/CPI string extension







Protection class to EN 60529 • IP65 Sub-D






Seal Nitrile rubber


Weight

yp







-V- New




1

2

4

3 5

6







status LEDs (BF)

5 CPI extension connection

6 Switching status displays of CP

solenoid coils

Pin allocation for CS31 interface (viewed on plug)


1 –

2 –

3 Bus 1

4 –

5 –

6 –

7 –

8 Bus 2

9 –

Housing Screened

-V- New


Fieldbus Direct, CPV-CS02-8Accessories – Fieldbus node CPV-CS02-8

Ordering data


Power supply

Power supply socket, straight M12x1, 4-pin FBSD-GD-7 18 497

FBSD-GD-9 18 495

Power supply socket, angled M12x1, 4-pin FBSD-WD-7 18 524

FBSD-WD-9 18 525

Fieldbus connection





0.5 m KVI-CP-3-WS-WD-0,5 540 328

2 m KVI-CP-3-WS-WD-2 540 329

5 m KVI-CP-3-WS-WD-5 540 330

8 m KVI-CP-3-WS-WD-8 540 331


5 m KVI-CP-3-GS-GD-5 540 333

8 m KVI-CP-3-GS-GD-8 540 334

User documentation


DI02-8 English P.BE-CP-DI02-EN 548 732





-V- New


Fieldbus Direct, CPV-DN2Technical data – Fieldbus node CPV-DN2







the switching status via LED.

The CPV-… valves are activated via




and 8 digital outputs or 16 solenoid

coils can be connected via a serial CP

string extension.

The CPV fieldbus node supports the

DeviceNet protocol and conforms to

the device profile of the pneumatic

valve.




• CPV10

• CPV14

• CPV18

Application

Bus connection

Plug connector

2xM12


fieldbus plug

Sub-D socket





Profibus allocation (to EN 50170). The

bus connector plug (with protection

class IP65 from Festo or IP20 from

other manufacturers) facilitates the







cable connection.

M12 adapter





(A-coded).

Screw terminals


















systems.




components.



the controller via DeviceNet and

maintenance can be started. In the

same way condition monitoring

supports the determining of service

intervals for the function chain.




Type CPV10-GE-DN2-8 CPV14-GE-DN2-8 CPV18-GE-DN2-8

Part No. 525 630 525 878 525 880



• Screw terminal strip, 5-pin

• Socket and plug, M12x1, 5-pin, A-coded

Baud rates [kbps] 125, 250, 500; set using a switch module

Addressing range 0 … 63; set using a switch module



LED diagnostics displays PS Common message regarding power supplyg p y

MNS DeviceNet status

Product family Pneumatic valve (27 dec.)

Ident. number 8942 dec.

Type of communication Polling, change of state, strobed I/O














Additional functions Condition counter


Permissible range [V DC] 20.4 … 26.4







Cover Polyamide, glass fibre (Ultramide)

Seal Nitrile rubber, Neoprene


Weight

yp







Fieldbus certification ODVA







1

5

2

3

4

6

1 Interchangeable fieldbus

connection:

– Micro Style connection

(2xM12)

– Open Style connection

(terminal strip)

– 9-pin Sub-D plug

2 Switch module (removable)


(4-pin M12 plug, operating volt-

age for electronics, load voltage

for CP valves)

4 LEDs:

– Power status (PS)

– Module/network status (MNS)

5 CP extension connection

6 Switching status displays of CPV

solenoid coils



Pin allocation for DeviceNet interface (viewed on plug)



2 CAN_L CAN Low

3 CAN_GND 0 V CAN interface


5 Screened Optional screened connection

6 GND Ground optional

7 CAN_H CAN high


9 CAN_V+ 24 V supply CAN interface


Pin Signal-specific

wire colour

Signal Description

1 blank Screened Connection to housing

2 red 24 V DC bus 24 V supply CAN interface

3 black 0 V bus 0 V CAN interface

4 white CAN_H Received/transmitted data high

5 blue CAN_L Received/transmitted data low

Pin allocation for Open Style adapter

Pin Signal-specific

wire colour

Signal Description







Fieldbus Direct, CPV-DN2Accessories – Fieldbus node CPV-DN2

Ordering data


Power supply


FBSD-GD-9 18 495


FBSD-WD-9 18 525

Fieldbus connection

Fieldbus socket, Sub-D connection FBS-SUB-9-BU-2x4-POL 197 960



Bus connection Micro Style, 2xM12 FBA-2-M12-5POL 525 632



Bus connection Open Style, 5-pin screw terminal strip

Bus connection Open Style for 5-pin terminal strip FBA-1-SL-5POL 525 634

Bus connection, 5-pin terminal strip FBSD-KL-2x5POL 525 635



0.5 m KVI-CP-3-WS-WD-0,5 540 328

2 m KVI-CP-3-WS-WD-2 540 329

5 m KVI-CP-3-WS-WD-5 540 330

8 m KVI-CP-3-WS-WD-8 540 331


5 m KVI-CP-3-GS-GD-5 540 333

8 m KVI-CP-3-GS-GD-8 540 334

User documentation

User documentation for CPV Direct, CPV fieldbus node German P.BE-CP-DN2-DE 526 016,

DN2 English P.BE-CP-DN2-EN 526 017

Italian P.BE-CP-DN2-IT 526 018

French P.BE-CP-DN2-FR 526 019

Spanish P.BE-CP-DN2-ES 526 020

Swedish P.BE-CP-DN2-SV 526 021


Fieldbus Direct, CPV-DN3-8Technical data – Fieldbus node CPV-DN3-8









LED.





and outputs or 32 solenoid coils can

be connected via a serial CPI string

extension.




• CPV10

• CPV14

• CPV18

Application

Bus connection

Plug connector

2xM12


fieldbus plug

Sub-D socket




a 9-pin Sub-D socket. The bus

connector plug (with protection class

IP65 from Festo or IP20 from other

manufacturers) facilitates the connec-


bus cable. An active bus terminal can

be connected using the integrated DIL

switch. The Sub-D interface is

designed for the activation of network

components via a fibre optic cable

connection.

M12 adapter





(B-coded).

Screw terminals












-V- New







systems.




components.











Type CPV10-GE-DN3-8 CPV14-GE-DN3-8 CPV18-GE-DN3-8

Part No. 546 198 546 200 546 202








Addressing range 0 … 63;


Product identification Product type Pneumatic valve (27 dec.)

Product code 8942 dec.

Types of communication Polling, change of state, strobed I/O






LED diagnostic displays PS Common message regarding power supply

LED display Bus-specific MNS: DeviceNet status

LED display Product-specific Valve switching statusp y








• Missing module on CP string











Materials Cover Reinforced polyamide

Materials Seal Nitrile rubber


Weight

yp


-V- New






Fieldbus certification ODVA







1

2

4

3







status LEDs (BF)

-V- New



Pin allocation for DeviceNet interface (viewed on plug)



2 CAN_L CAN Low



5 Screened Optional screened connection

6 GND Ground optional

7 CAN_H CAN high



Pin allocation for M12 Micro Style adapter

Pin Signal-specific

wire colour

Signal Description







Pin Signal-specific

wire colour

Signal Description





5 red 24 V DC bus 24 V DC supply CAN interface

-V- New


Fieldbus Direct, CPV-DN3-8Accessories – Fieldbus node CPV-DN3-8

Ordering data


Power supply


FBSD-GD-9 18 495


FBSD-WD-9 18 525

Fieldbus connection

Fieldbus socket, Sub-D connection FBS-SUB-9-BU-2x4-POL 197 960



Bus connection Micro Style, 2xM12 FBA-2-M12-5POL 525 632




Bus connection Open Style for 5-pin terminal strip FBA-1-SL-5POL 525 634

Bus connection, 5-pin terminal strip FBSD-KL-2x5POL 525 635



0.5 m KVI-CP-3-WS-WD-0,5 540 328

2 m KVI-CP-3-WS-WD-2 540 329

5 m KVI-CP-3-WS-WD-5 540 330

8 m KVI-CP-3-WS-WD-8 540 331


5 m KVI-CP-3-GS-GD-5 540 333

8 m KVI-CP-3-GS-GD-8 540 334

User documentation

User documentation for CPV Direct, CPV fieldbus node German P.BE-CP-DN3-DE 548 737,

DN3 English P.BE-CP-DN3-EN 548 738

Italian P.BE-CP-DN3-IT 548 741

French P.BE-CP-DN3-FR 548 740

Spanish P.BE-CP-DN3-ES 548 739

Swedish P.BE-CP-DN3-SV 548 742

-V- New


Fieldbus Direct, CPASC-AE32-DNTechnical data – Fieldbus node CPASC-AE32-DN

CPA-SC fieldbus node for communica-

tion between a CPA-SC valve terminal


node is used for activation of a CPA-SC

valve terminal with up to 32 solenoid

coils on max. 24 valve positions and

for displaying the switching status via

LED.

The CPA-SC… valves are activated via






string extension.

Application

Bus connection

The DeviceNet connection is estab-

lished via a 5-pin M12 plug with pins

that corresponds to the specific mini

connector. A DeviceNet installation

with a higher degree of protection is

typically configured using main and

branch lines that are connected via

T-pieces.

Various manufacturers such as Turck,

Lumberg and Rockwell offer finished

cables and terminating resistors. The

terminating resistors are attached to

the two outermost T-pieces. This

installation technique keeps the bus

closed while a bus station is being

removed.

In order to prevent confusion when

establishing a connection to the

fieldbus, a Micro Style M12, 5-pin

plug connector with a straight socket

(A-coded) is used. A Micro Style M12,

5-pin plug connector with a straight

socket (B-coded) is used for the power

supply.







systems.




components.











Type CPASC-AE32-DN

Part No. 538 652

Fieldbus interface M12x1, 5-pin, A-coded


Baud rates [kbps] 125, 250, 500; set using a DIL switch





LED display (bus-specific) MOD Module status

NET Network status

LED display (product-specific) PS Electronics supply, sensor supplyp y (p p )

PL Load supply for valves

SF CP system fault

Product identification Product type Pneumatic valve (27 dec.)

Product code 5250 dec.

Type of communication Polling, change of state, strobed I/O, explicit message

Protocol DeviceNet





Device-specific diagnostics via DeviceNet • Short circuit/overload of outputs










Permissible range [V DC] 20.4 … 26.4




Protection class to EN 60529 IP40 (with fitted cover)

Materials Reinforced polyamide


Weight

yp









6 5 4 7 3 2 18





5 Rotary switch for baud rate


7 Earth terminal


Pin allocation for fieldbus interface

Pin Signal-specific

wire colour

Signal Description







Fieldbus Direct, CPASC-AE32-DNAccessories – Fieldbus node CPASC-AE32-DN

Ordering data



Power supply socket, for Micro Style connection, M12, 5-pin, straight socket (B-coded) NTSD-GD-9-M12-5POL-RK 538 999


Fieldbus socket for Micro Style connection, M12, 5-pin, straight socket (A-coded) FBSD-GD-9-5POL 18 324



0.5 m KVI-CP-3-WS-WD-0,5 540 328

2 m KVI-CP-3-WS-WD-2 540 329

5 m KVI-CP-3-WS-WD-5 540 330

8 m KVI-CP-3-WS-WD-8 540 331


5 m KVI-CP-3-GS-GD-5 540 333

8 m KVI-CP-3-GS-GD-8 540 334

User documentation

User documentation for Fieldbus Direct, German P.BE-CPASC-CPVSC-DN-DE 539 008,

CPA-SC fieldbus node DeviceNet English P.BE-CPASC-CPVSC-DN-EN 539 009

Italian P.BE-CPASC-CPVSC-DN-IT 539 010

French P.BE-CPASC-CPVSC-DN-FR 539 011

Spanish P.BE-CPASC-CPVSC-DN-ES 539 012

Swedish P.BE-CPASC-CPVSC-DN-SV 539 013


Fieldbus Direct, CPVSC1-AE16-DNTechnical data – Fieldbus node CPVSC1-AE16-DN

CPV-SC fieldbus node for communica-

tion between a CPV-SC valve terminal


node is used for activation of a

CPV-SC valve terminal with up to

16 solenoid coils on max. 16 valve

positions and for displaying the

switching status via LED.

The CPV-SC… valves are activated via






string extension.

Application

Bus connection


lished via a 5-pin M12 plug with pins

that corresponds to the specific mini

connector. A DeviceNet installation

with a higher degree of protection is

typically configured using main and

branch lines that are connected via

T-pieces.








removed.

In order to prevent confusion when

establishing a connection to the

fieldbus, a Micro Style M12, 5-pin

plug connector with a straight socket

(A-coded) is used. A Micro Style M12,

5-pin plug connector with a straight

socket (B-coded) is used for the power

supply.







systems.




components.











Type CPVSC1-AE16-DN

Part No. 538 654

Fieldbus interface M12x1, 5-pin, A-coded








LED display (bus-specific) MOD Module status, common message regarding power supplyp y ( p )

NET Network status, power supply for valves

LED display (product-specific) PL Load supplyp y (p p )

PS Electronics supply, sensor supply

SF System fault

Type of communication Polling, change of state, strobed I/O, explicit message

Protocol DeviceNet



















Protection class to EN 60529 IP40 (with fitted cover)



Temperature range Operating voltage [°C] –5 … +50p g

Storage [°C] –20 … +50

Materials Polymer


Weight

yp





6 5 4

7

3 2 18





5 Rotary switch for baud rate


7 Earth terminal


Pin allocation for fieldbus interface

Pin Signal-specific

wire colour

Signal Description







Fieldbus Direct, CPVSC1-AE16-DNAccessories – Fieldbus node CPVSC1-AE16-DN

Ordering data



Power supply socket, for Micro Style connection, M12, 5-pin, straight socket (B-coded) NTSD-GD-9-M12-5POL-RK 538 999


Fieldbus socket for Micro Style connection, M12, 5-pin, straight socket (A-coded) FBSD-GD-9-5POL 18 324



0.5 m KVI-CP-3-WS-WD-0,5 540 328

2 m KVI-CP-3-WS-WD-2 540 329

5 m KVI-CP-3-WS-WD-5 540 330

8 m KVI-CP-3-WS-WD-8 540 331


5 m KVI-CP-3-GS-GD-5 540 333

8 m KVI-CP-3-GS-GD-8 540 334

User documentation

User documentation for Fieldbus Direct, German P.BE-CPASC-CPVSC-DN-DE 539 008,

CPV-SC fieldbus node DeviceNet English P.BE-CPASC-CPVSC-DN-EN 539 009

Italian P.BE-CPASC-CPVSC-DN-IT 539 010

French P.BE-CPASC-CPVSC-DN-FR 539 011

Spanish P.BE-CPASC-CPVSC-DN-ES 539 012

Swedish P.BE-CPASC-CPVSC-DN-SV 539 013


Fieldbus Direct, CDVI-DNTechnical data – Fieldbus node CDVI-DN

CDVI fieldbus node for communication

between a CDVI valve terminal and a


used for activation of a CDVI valve

terminal with up to 24 solenoid coils

on max. 12 valve positions and for


LED.

The CDVI… valves are activated via






string extension.

The CDVI fieldbus node supports the

DeviceNet protocol and conforms to

the device profile of the pneumatic

valve.

Application

Bus connection – General information


lished via a 5-pin M12 plug that

corresponds to the specified mini con-

nector. A DeviceNet installation with a

higher degree of protection is typically

configured using main and branch

lines that are connected via T-pieces.








removed.

The DeviceNet plug connector

(Micro Style M12, 5-pin, straight

socket (A-coded)) and the power

supply plug connector (Micro Style

M12, 5-pin, straight socket (A-coded))

are identical.

Bus connection – Micro Style

• Plug connector 2x M12

• Installation with IP65/67

protection

Micro Style is prepared for connection

via the bus cable to an M12 plug for

the incoming cable and a socket for

the outgoing bus cable.

The bus connection fulfils the require-

ment of a T-distributor, which means

that the CDVI valve terminal can be

disconnected from the DeviceNet with-

out interrupting the bus. This method

of direct connection eliminates the

need for the branch line length in the

DeviceNet configuration.







systems.




components.











Type CDVI-DN

Part No. 197 648



Baud rates [kbps] 125, 250, 500;




LED diagnostic displays PS Common message regarding power supplyg p y


MNS DeviceNet module/network status

CP/CPI CP/CPI extension modules


Type of communication Polling, change of state


Max. no. of solenoid coils 24+16











Nominal operating voltage [V DC] 24, reverse polarity protected

Operating voltage Permissible range [V DC] 20.4 … 26.4p g g




Protection class to EN 60529 IP66, IP67, IP69k1)

Materials � Internet: type 15

Dimensions (LxWxD)

yp 5

Weight

1) To DIN 40050 Part 9 (only up to 50 bar at 80°C; with sealed CP/CPI connection)

Type 4 to NEMA 250 (hose-down test, test no. 5.7)








1 3 42 1 Fieldbus output

(socket, M12)

2 Fieldbus input

(plug, M12)

3 CP extension (M9)

with Clean Design cover

4 Power supply

(plug, M12)

5 6 5 PS Power system

Operating voltage of

electronics

PL Power load

Load voltage of valves

MNS Module/network status

CP Compact Performance

CP extension modules

6 Status display of the solenoid

coils

Pin allocation for fieldbus interface (M12 socket)

Pin Signal-specific

wire colour

Signal Description






Pin allocation for fieldbus interface (M12 plug)

Pin Signal-specific

wire colour

Signal Description







Fieldbus Direct, CDVI-DNAccessories – Fieldbus node CDVI-DN

Ordering data



Power supply socket, for Micro Style connection, M12, 5-pin, straight socket (A-coded) FBSD-GD-9-5POL 18 324


Micro Style connection, M12, 5-pin, straight socket (A-coded) FBSD-GD-9-5POL 18 324

Micro Style connection, M12, 5-pin, straight plug (A-coded) FBS-M12-5GS-PG9 17 538



0.5 m KVI-CP-3-WS-WD-0,5 540 328

2 m KVI-CP-3-WS-WD-2 540 329

5 m KVI-CP-3-WS-WD-5 540 330

8 m KVI-CP-3-WS-WD-8 540 331


5 m KVI-CP-3-GS-GD-5 540 333

8 m KVI-CP-3-GS-GD-8 540 334

User documentation

User documentation for CDVI-DN German P.BE-CDVI-DN-DE 539 044

English P.BE-CDVI-DN-EN 539 045

Italian P.BE-CDVI-DN-IT 539 048

French P.BE-CDVI-DN-FR 539 047

Spanish P.BE-CDVI-DN-ES 539 046

Swedish P.BE-CDVI-DN-SV 539 049


Fieldbus Direct, CPV-CO2Technical data – Fieldbus node CPV-CO2














string extension.




• CPV10

• CPV14

• CPV18

Application

Bus connection

Plug connector

2xM12


fieldbus plug

The branch line length does not apply

to any type of connection used.

Screw terminals


• For installations in protected

environments (IP20)


a 5-pin row.

If the valve terminal is ordered with

this bus connection, the 5-pin screw

terminal strip will also be supplied. It

is designed with double screw

terminals for the incoming and the

outgoing bus cable. This connection

technology provides a T-distributor

function.

Plug connector 2xM12




an M12 plug and socket.


ment of a T-distributor, this means

that the CPV valve terminal can be

disconnected from the bus without

interrupting the bus.

Sub-D fieldbus plug

• 9-pin Sub-D plug



a 9-pin Sub-D plug as per the CAN in

Automation (CiA) specification DS102

with additional 24 V CAN transceiver

supply (option as per DS102). The bus

connector plug facilitates the connec-


bus cable. There are spring-loaded

terminals for the four wires (CAN_L,

CAN_H, 24 V, 0 V) of the incoming and

outgoing bus cable.







systems.




components.



the controller via CANopen and main-








Type CPV10-GE-CO2-8 CPV14-GE-CO2-8 CPV18-GE-CO2-8

Part No. 525 876 525 882 525 884

Fieldbus interface Either • Sub-D socket, 9-pin



Baud rates [kbps] 125, 250, 500, 1000; set using a switch module

CP string extension Yes, 16 inputs and 8 outputs (or 16 valves)

Addressing range Node ID 1 … 127; set using a switch element

LED display (bus-specific) MNS CANopen status

LED display (product-specific) PS Electronics supply and load voltage supply

Valve switching status

Type of communication To DS401

Product identification Product family: Digital I/O DS 401, vendor code: OxD

Number of PDOs 1 Tx/Rx

Number of SDOs 1 server SDO

Configuration support EDS file and bitmaps





Device-specific diagnostics • Missing module on the CP string

• Short circuit/overload of outputs





• Via emergency message and object 1001/1002/1003


Parameterisation Via SDO











Seal Nitrile rubber


Weight

yp







Fieldbus certification CiA







1

5

2

3

4

6

1 Fieldbus connection:

– 9-pin Sub-D plug



(4-pin M12 plug, operating volt-

age for electronics, load voltage

for CP valves)

4 LEDs:

– Power status (PS)

– Module/network status (MNS)



solenoid coils



Pin allocation for CANopen interface (viewed on plug)



2 CAN_L Received/transmitted data low



5 CAN_Shld Optional screened connection

6 GND Ground

7 CAN_H Received/transmitted data high



Housing Screened Connection to FE



1 Screened Connection to housing













Fieldbus Direct, CPV-CO2Accessories – Fieldbus node CPV-CO2

Ordering data


Power supply


FBSD-GD-9 18 495


FBSD-WD-9 18 525

Bus connection

Sub-D plug for CANopen FBS-SUB-9-BU-2x5POL-B 532 219


Bus connection 2xM12


Fieldbus socket, M12, 5-pin, straight FBSD-GD-9-5POL 18 324

Plug, M12, 5-pin, straight FBS-M12-5GS-PG9 175 380






0.5 m KVI-CP-3-WS-WD-0,5 540 328

2 m KVI-CP-3-WS-WD-2 540 329

5 m KVI-CP-3-WS-WD-5 540 330

8 m KVI-CP-3-WS-WD-8 540 331


5 m KVI-CP-3-GS-GD-5 540 333

8 m KVI-CP-3-GS-GD-8 540 334

User documentation

User documentation for CPV Direct, CPV fieldbus node German P.BE-CP-CO2-DE 526 009,

CO2 English P.BE-CP-CO2-EN 526 010

Spanish P.BE-CP-CO2-ES 526 011

French P.BE-CP-CO2-FR 526 012

Italian P.BE-CP-CO2-IT 526 013

Swedish P.BE-CP-CO2-SV 526 014


Fieldbus Direct, CPV-CO3-8Technical data – Fieldbus node CPV-CO3-8


system with Specification “B”

(enhanced functionality) for communi-

cation between a CPV valve terminal


node is used for activation of a CPV

valve terminal with 8 valve slices and







and outputs or 32 solenoid coils can

be connected via a serial CPI string

extension.




• CPV10

• CPV14

• CPV18

Application

Bus connection

Plug connector

2xM12


fieldbus plug

The branch line length does not apply

to any type of connection used.

Screw terminals


• For installation in protected

environments (IP20)


a 5-pin row.

If the valve terminal is ordered with

this bus connection, the 5-pin screw

terminal strip will also be supplied. It

is designed with double screw

terminals for the incoming and the

outgoing bus cable. This connection

technology provides a T-distributor

function.

Plug connector 2xM12




an M12 plug and socket.


ment of a T-distributor, which means

that the CPV valve terminal can be

disconnected from the bus without

interrupting the bus.

Sub-D fieldbus plug

• 9-pin Sub-D plug



a 9-pin Sub-D plug as per the CAN in

Automation (CiA) specification DS102

with additional 24 V CAN transceiver

supply (option as per DS102). The bus

connector plug facilitates the connec-


bus cable. There are spring-loaded

terminals for the four wires (CAN_L,

CAN_H, 24 V, 0 V) of the incoming and

outgoing bus cable.

-V- New







systems.




components.



the controller via CANopen and main-








Type CPV10-GE-CO3-8 CPV14-GE-CO3-8 CPV18-GE-CO3-8

Part No. 546 204 546 206 546 208





Note on the fieldbus interface • 24 VDC version CAN interface via bus

• Interface to CiA DS102

CP string extension Yes, 32 inputs and 32 outputs

Baud rates [kbps] 125, 250, 500 and 1000; set using DIL switch

Addressing range Node ID 1 … 127; set using DIL switch

Product identification Product family: Digital I/O DS401, vendor code: OxD

Number of PDOs 1 Tx/Rx

Number of SDOs 1 server SDO

Configuration support EDS file and bitmaps

Max. address capacity, inputs [Byte] 8

Max. address capacity, outputs [Byte] 8





LED displays (bus-specific) MNS Bus status (module/network status)

LED displays (product-specific) Valve switching statusp y (p p )

PS Operating voltage for electronics and load supply







• Undervoltage of valve terminal extension



• Via emergency message and object 1001, 1002 and 1003

Parameterisation Via SDO











Seal Nitrile rubber


Weight

yp


-V- New






Fieldbus certification CiA

ATEX specification II 3 GD EEx nA II T5 T 80 °C X



CE, CiA certification




1

2

4

3 5

6







status LEDs (BF)

5 CPI extension connection


solenoid coils

-V- New



Pin allocation for CANopen interface (viewed on plug)






5 CAN_Shld Optional screened connection

6 GND Ground




Housing Screened Connection to FE















-V- New


Fieldbus Direct, CPV-CO3-8Accessories – Fieldbus node CPV-CO3-8

Ordering data


Power supply

Power supply socket, straight, M12x1, 4 pin FBSD-GD-7 18 497

FBSD-GD-9 18 495

Power supply socket, angled, M12x1, 4 pin FBSD-WD-7 18 524

FBSD-WD-9 18 525

Bus connection

Sub-D plug for CANopen FBS-SUB-9-BU-2x5POL-B 532 219


Bus connection 2xM12


Fieldbus socket, M12, 5-pin, straight FBSD-GD-9-5POL 18 324

Plug, M12, 5-pin, straight FBS-M12-5GS-PG9 175 380






0.5 m KVI-CP-3-WS-WD-0,5 540 328

2 m KVI-CP-3-WS-WD-2 540 329

5 m KVI-CP-3-WS-WD-5 540 330

8 m KVI-CP-3-WS-WD-8 540 331


5 m KVI-CP-3-GS-GD-5 540 333

8 m KVI-CP-3-GS-GD-8 540 334

User documentation

User documentation for CPV Direct, CPV fieldbus node German P.BE-CP-CO3-DE 548 743,

CO3 English P.BE-CP-CO3-EN 548 744

Spanish P.BE-CP-CO3-ES 548 745

French P.BE-CP-CO3-FR 548 746

Italian P.BE-CP-CO3-IT 548 747

Swedish P.BE-CP-CO3-SV 548 748

-V- New


Fieldbus Direct, CPV-IBTechnical data – Fieldbus node CPV-IB


between a CPV valve terminal and an

Interbus master. The fieldbus node is











string extension.

The CPV fieldbus node IB supports the

Interbus fieldbus protocol and

represents a remote bus station.




• CPV10

• CPV14

• CPV18

Application

Bus connection

Sub-D plug

Interbus outgoing

Sub-D socket

Interbus incoming


a 9-pin Sub-D socket and a 9-pin

Sub-D plug with a typical Interbus pin

allocation.

The bus connector plugs (with protec-

tion class IP65 from Festo or IP20

from other manufacturers) facilitate

the connection of the incoming and

the outgoing bus cable. The outgoing

bus plug contains the typical Interbus

RBST bridge for identification of the

outgoing bus connection.

The Sub-D interfaces are designed for

the control of network components

using a fibre optic cable connection.




Type CPV10-GE-IB-8 CPV14-GE-IB-8 CPV18-GE-IB-8

Part No. 197 177 197 179 197 181

Fieldbus interface Sub-D, 9-pin, socket and pin


Baud rates [kbps] 500, 2000; set using a DIL switch

CP/CPI string extension Yes


Bus type Remote bus

Profile 12 (digital I/O devices)

PCP channel No

Configuration support Icons for CMD software



Max. no. of outputs 8 (16 solenoid coils omitted)


Max. no. of process data bits Inputs 32p

Outputs 32

LED displays (bus-specific) BA Bus activep y ( p )

RC Remotebus check

RD Remotebus disable

UL Operating voltage of Interbus interface

LED display (product-specific) Valve switching status

Diagnostics Short circuit, load supply, sensor supply, configuration error

Pow Operating voltage and load supply







• Missing module on the CP string

• Via peripherals errors

Parameterisation No

Additional functions Diagnostics using status bits (inputs)







Fieldbus certification Interbus club










Seal Nitrile rubber


Weight

yp





1

2

4

5

3

6

7

8

9

1 Red LED: Dia (diagnostics)

2 Green LED: Pow (power supply

display)

3 Green LED: RC (remotebus check)

4 Green LED: UL (power supply to

Interbus)

5 Green LED: BA (bus active)

6 Yellow LED: RD (remotebus dis-

able)


solenoid coils


9 Interbus connection

Pin allocation for Interbus interface, incoming (viewed on plug)


1 DO1 Data out

2 /DI1 Data in

3 GND Reference conductor/ground



6 /DO1 Data out inverse

7 /DI1 Data in inverse



Housing Screened Connection to functional earth via R/C combination

Pin allocation for Interbus interface, outgoing (viewed on socket)


1 DO2 Data out

2 /DI2 Data in

3 GND Reference conductor/ground


5 +5 V Station detection1)

6 /DO2 Data out inverse

7 /DI2 Data in inverse


9 RBST Station detection1)

Housing Screened Connection to functional earth via R/C combination

1) The incoming interface is electrically isolated from the CPX peripherals. The plug housing is connected to the FE of the CPX terminal via an R/C combination.

The CPX terminal contains the protocol chip SUPI 3 OPC. This ensures automatic detection of additional connected Interbus stations. There is therefore no need for a bridge between pin 5 and pin 9.


Fieldbus Direct, CPV-IBAccessories – Fieldbus node CPV-IB

Ordering data


Power supply


FBSD-GD-9 18 495


FBSD-WD-9 18 525

Bus connection

Fieldbus plug, Sub-D connection for Interbus incoming FBS-SUB-9-BU-IB-B 532 218

Fieldbus plug, Sub-D connection for Interbus outgoing FBS-SUB-9-GS-IB-B 532 217




0.5 m KVI-CP-3-WS-WD-0,5 540 328

2 m KVI-CP-3-WS-WD-2 540 329

5 m KVI-CP-3-WS-WD-5 540 330

8 m KVI-CP-3-WS-WD-8 540 331


5 m KVI-CP-3-GS-GD-5 540 333

8 m KVI-CP-3-GS-GD-8 540 334

User documentation

User documentation for CPV Direct, CPV fieldbus node German P.BE-CP-IB-DE 527 515,

IB English P.BE-CP-IB-EN 527 516

Spanish P.BE-CP-IB-ES 527 517

French P.BE-CP-IB-FR 527 518

Italian P.BE-CP-IB-IT 527 519

Swedish P.BE-CP-IB-SV 527 520


Fieldbus Direct, CPV-IPTechnical data – Fieldbus node CPV-IP


between a CPV valve terminal and an

IP-Link coupler box. The fieldbus node

is used for activation of a CPV valve







and heat emission.

The CPV fieldbus node supports the

fieldbus protocol IP-Link.


two sizes, with identical performance

characteristics:

• CPV10

• CPV14

Application

Bus connection Power supply

The bus connection is established

using two IP-Link fibre optic cable

connectors.

The bus connector plugs (with protec-

tion class IP65) facilitate the connec-

tion of the incoming and outgoing

fibre optic cable (FOC).

The power is supplied via a 4-pin M8

connection (socket). The supply to the

internal logic is fully electrically iso-

lated from the supply to the solenoid

coils.

The second M8 connection (pin)

enables power to be supplied to

additional CPV IP-Link valve terminals

and other IP-Link modules.




Type CPV10-GE-IP-8 CPV14-GE-IP-8

Part No. 534 509 534 507

Fieldbus interface IP-Link

Incoming, outgoing

Electrical isolation of the fieldbus interface FOC

CP string extension No

Baud rates [kbps] 2000

Data model Compact 16 outputs

Complex 24 inputs

24 outputs

Configuration support Profibus GSD fileg pp

Interbus Not necessary

CANopen EDS file

DeviceNet EDS file


LED displays (bus-specific) US Operating voltage of internal logicp y ( p )

UP Operating voltage of valves

RUN Bus active

ERR Data transmission error

Product identification Product family 4: Valves

Device-specific diagnostics IE4404

Parameterisation Via register communication:

watchdog setting for coils 1 … 16





Current consumption Logic [mA] Max. 100p

Valves Depending on valve type

Protection class to EN 60 529 IP65






Seal Nitrile rubber


Weight

yp










1

2

3

4

5

6

1 Connection for power supply,

incoming (M8, 4-pin, plug)

2 Connection for power supply,

outgoing (M8, 4-pin, socket)

3 LEDs:

– US: Operating voltage for

electronics (green)

– UP: Load voltage for valves

(green)

– RUN: Bus active (green)

– ERR: Error (red)

4 Fieldbus connection, incoming

(IP-Link fibre optic cable IP65

socket)

5 Fieldbus connection, outgoing

(IP-Link fibre optic cable IP65

socket)

6 LEDs (yellow) for switching status

display of CPV solenoid coils

Power supply, incoming

Pin Signal

1 24 V DC operating voltage for electronics (US)

2 24 V DC load voltage for valves (UP)

3 0 V electronics (US)

4 0 V valves (UP)

Power supply, outgoing

Pin Signal

1 24 V DC operating voltage for electronics (US)

2 24 V DC load voltage for valves (UP)

3 0 V electronics (US)

4 0 V valves (UP)



Equipotential bonding

Example of connection with electrical isolation of operating and load voltage with 2 PELV power supply units

1 2

12

14

12

14

12

14

12

14

12

14

12

14

12

14

12

14

Us

Up

Run

ErrIP--L24V

12

14

12

14

12

14

12

14

12

14

12

14

12

14

12

14

Us

Up

Run

ErrIP--L24V

3 4 1 2

3

1 Power supply unit for load

voltage

2 Device for isolation monitoring

3 Power supply unit for operating

voltage

CPV Direct is prepared for the

connection with electrical isolation of

operating and load voltage.

Example of connection with PELV power supply unit and equipotential bonding

1 2

3 4 1 2

1 PE and equipotential bonding

2 Load voltage (can be discon-

nected separately) plus external

fuses

The CPV valve terminal has an earth

terminal for equipotential bonding on

the end plate.

Ordering data


User documentation

User documentation for CPV Direct, CPV fieldbus node

IP

German P.BE-CPV-DI-IP-DE 534 516

IPEnglish P.BE-CPV-DI-IP-EN 534 517


Fieldbus Direct, CPV-CC-8Technical data – Fieldbus node CPV-CC-8



higher-order master for Control &

Communication-Link (CC-Link) from

Mitsubishi. The fieldbus node is used

for activation of a CPV valve terminal

with 8 valve slices and 16 solenoid

coils and for displaying the switching

status via LED.




and heat emission. A CP input module

with 16 digital inputs can be

connected via a serial CP string

extension.




• CPV10

• CPV14

• CPV18

Application

Bus connection

The bus connection can be selected

when ordering and is established by

means of:

• a terminal strip with IP20

protection

• a Sub-D plug with IP65 protection

from Festo

• a Sub-D plug with IP20 protection

from other manufacturers

All connection types have an inte-

grated T-distributor function and thus

support the connection of an incoming

and outgoing bus cable.

The integrated interface with RS 485

transmission technology is designed

for the typical CC-Link 3-wire connec-

tion technology (in accordance with

CLPA CC-Link Spec. V1.11).

CC-Link implementation

The CPV fieldbus node supports one

station per slave.

Cyclical data transmission for the

solenoid coils, digital inputs and

status information is conducted using

the bit and word ranges (Rx/Ry/RWr/

RWw).




Type CPV10-GE-CC-8 CPV14-GE-CC-8 CPV18-GE-CC-8

Part No. 197 959 197 967 197 969





16 inputs (connection of an additional CP valve terminal or CP output module

not possible)

Baud rates [kbps] 156 … 10,000;

set using DIL switch


set using DIL switch

No. of stations per slave 1 station

Permanent setting

Vendor code 0x0177

Product identification Machine type 0x3C

LED displays (bus-specific) RUN Communication OK

LED displays (bus-specific) Pow/Err Operating voltage/CRC error or communication error

LED displays (product-specific) Valve switching status


Max. no. of solenoid coils 16 (Ry)

Max. no. of outputs 0

Max. no. of inputs 16 (RWr)

Device-specific diagnostics • Short circuit/overload of inputs



• Missing module on the CP string

• Remote ready

• Via status byte

Parameterisation Hold/clear via DIL switch

Additional functions 8-bit system status in the bit range (Rx)





Protection class to EN 60529 IP20, IP65 (Sub-D)






Seal Nitrile rubber


Weight

yp










1

5

2

3

4

6

1 Fieldbus connection, 9-pin Sub-D

socket



(4-pin M12 plug, operating

voltage for electronics/sensors,

load voltage for CP valves)

4 LEDs:

– Data communication (RUN)

– Operating voltage/error

(Pow/Err)



solenoid coils

Pin allocation for Sub-D interface (socket view)



2 DA Data A

3 DG Data reference potential


5 n.c. FE via R/C combination (not used with CC-Link: connection via R/C

combination to FE (1 Mohm/220 nF))


7 CAN_H Data B



Housing SLD Screened

Pin allocation for terminal strip


1 FG Functional earth/housing

2 SLD Screened

3 DG Data reference potential

4 DB Data B

5 DA Data A


Fieldbus Direct, CPV-CC-8Accessories – Fieldbus node CPV-CC-8

Ordering data


Power supply

Power supply socket, straight, M12x1, 4-pin FBSD-GD-7 18 497

FBSD-GD-9 18 495

Power supply socket, angled, M12x1, 4-pin FBSD-WD-7 18 524

FBSD-WD-9 18 525


Bus connection, 5-pin terminal strip for CC-Link FBA-1-KL-5POL 197 962

Fieldbus plug, Sub-D connection FBS-SUB-9-GS-2x4POL-B 532 220




0.5 m KVI-CP-3-WS-WD-0,5 540 328

2 m KVI-CP-3-WS-WD-2 540 329

5 m KVI-CP-3-WS-WD-5 540 330

8 m KVI-CP-3-WS-WD-8 540 331


5 m KVI-CP-3-GS-GD-5 540 333

8 m KVI-CP-3-GS-GD-8 540 334

User documentation

User documentation for CPV Direct, CPV fieldbus node German P.BE-CP-CC-DE 197 963

CC English P.BE-CP-CC-EN 197 964

Japanese P.BE-CP-CC-J 197 965


Products and services – everything from a single source

Products incorporating new ideas are

created when enthusiasm for techno-

logy and efficiency come together.

Tailor-made service goes without

saying when the customer is the focus

of attention.

Pneumatic and electrical drives Valves and valve terminals Compressed air preparation

• Pneumatic cylinders

• Semi-rotary drives

• Handling modules

• Servopneumatic positioning

systems

• Electromechanical drives

• Positioning controllers and

controllers

• Standard valves

• Universal and application-

optimised valves

• Manually and mechanically

actuated valves

• Shut-off, pressure control and flow

control valves

• Proportional valves

• Safety valves

Fieldbus systems/

electrical peripherals

• Fieldbus Direct

• Installation system CP/CPI

• Modular electrical terminal CPX

• Service unit combinations

• Filter regulators

• Filters

• Pressure regulators

• Lubricators

• On-off and soft-start valves

• Dryers

• Pressure amplifiers

• Accessories for compressed air

preparation

Components

Modules

Systems

Customer-specific solutions

Industry-specific solutions

Services from Festo to increase your productivity – across the entire value creation sequence

< Engineering – for greater speed in

the development process

< Supply chain – for greater speed in

the procurement process

• CAD models

• 14 engineering tools

• Digital catalogue

• FluidDRAW®

• More than 1,000 technical

consultants and project engineers

worldwide

• Technical hotlines

• E-commerce and online shop

• Online order tracking

• Euro special manufacturing service

• Logistics optimisation


Gripping and vacuum technology Sensors and monitoring units Controllers/bus systems Accessories

• Vacuum generators

• Vacuum grippers

• Vacuum security valves

• Vacuum accessories

• Standard grippers

• Micro grippers

• Precision grippers

• Heavy-duty grippers

• Proximity sensors

• Pressure and flow sensors

• Display and operating units

• Inductive and optical proximity

sensors

• Displacement encoders for

positioning cylinders

• Optical orientation detection and

quality inspection

• Pneumatic and electropneumatic

controllers

• Programmable logic controllers

• Fieldbus systems and accessories

• Timers/counters

• Software for visualisation and data

acquisition

• Display and operating units

• Pipes

• Tubing

• Pipe connectors and fittings

• Electrical connection technology

• Silencers

• Reservoirs

• Air guns

All in all, 100% product and service quality

A customer-oriented range with unlimited flexibility:

Components combine to produce ready-to-install modules and

systems. Included in this are special designs – since at Festo, most

industry-specific products and customer-specific solutions are based

on the 23,000 plus catalogue products. Combined with the services

for the entire value creation sequence, the end result is unbeatable

economy.

< Assembly – for greater speed in the

assembly/commissioning process

< Operation – for greater speed in the

operational process

• Prepack

• Preassembly

• Turnkey pneumatics

• Handling solutions

• Spare parts service

• Energy saving service

• Compressed air consumption

analysis

• Compressed air quality analysis

• Customer service


Aspects of quality

Quality can be viewed from a number of aspects. A short virtual tour of the Research and Development

department, the Production department or the Customer Service Centre speaks more than a thou-

sand words.

3D engineering and simulation >

Innovation quality Production quality

Let’s look at some of the figures:

• 6.5% of turnover

• 2,800 patents with 100 new

applications every year

• 3D engineering and simulation

• 10,600 employees worldwide

• Each and every one of them a

lateral thinker

Your interest is quality and economy –

therefore we place considerable value

on:

• Minimum production tolerances

• Ultra-modern, proprietary pro-

duction methods

• Core competencies in production

• Defined quality standards across

the entire production chain

• Strict quality assurance systems: on

that you can depend.


Price quality Range quality Didactic quality

More service for less money.Many of

the new and further developments in

the Festo product range have one

thing in common: they are technically

superior and more attractively priced

than their predecessor product.

Examples are to be found in all prod-

uct segments: among the drives,

valves, valve terminals; among the

service units, and among the range of

accessories.

For individual solutions. Festo offers

components as industry-specific cata-

logue products as well as standards-

based and highly individual special

designs. Ready-to-install combina-

tions of these components play an

integral part in the Festo product port-

folio as modules or systems. Inciden-

tally, an increasing number of compo-

nents can be individually configured

as modular products.

To complement the products and ser-

vices for automation, Festo Didactic

offers exceptionally efficient training

hardware, learning software and sem-

inars of the highest quality. Optimally

tailored to your value creation

sequence.

In short – training in practical ap-

plications for practical application.


What must be observed when using Festo components?

Specified limit values for technical

data and any specific instructions

must be adhered to by the user in

order to ensure recommended operat-

ing conditions.

When pneumatic components are

used, the user shall ensure that they

are operated using correctly prepared

compressed air without aggressive

media.

When Festo components are used in

safety-oriented applications, the user

shall ensure that all applicable

national and local safety laws and

regulations, for example the machine

directive, together with the relevant

references to standards are observed.

Unauthorised conversions or modifi-

cations to products and systems from

Festo involve a safety risk and are

thus not permissible.

Festo does not accept any liability for

resulting damages.

You should contact Festo’s advisors if

one of the following apply to your

application:

• The ambient conditions and condi-

tions of use or the operating me-

dium differ from the specified

technical data.

• The product is to perform a safety

function.

• A risk or safety analysis is required.

• You are unsure about the product’s

suitability for use in the planned

application.

• You are unsure about the product’s

suitability for use in safety-oriented

applications.

All technical data applies at the time

of going to print.

All texts, representations, illustrations

and drawings included in this cata-

logue are the intellectual property of

Festo AG & Co. KG, and are protected

by copyright law.

All rights reserved, including transla-

tion rights. No part of this publication

may be reproduced or transmitted in

any form or by any means, electronic,

mechanical, photocopying or other-

wise, without the prior written per-

mission of Festo AG & Co. KG. All

technical data subject to change

according to technical update.

Documents

Fieldbus Direct - Festo · Fieldbus Direct For extremelycompact and space-saving communication ... 5 7 CP-E08-M12x2-CL † 8inputs24VDC † Signalstatusdisplayvia8LEDs † Operatingstatusdisplay