Small

FenderWedge - Protection and Separation

Medium

Large

X-Small

INDICATIONA unique combination of a preparation shield and a sectional matrix for Class II fillings of primary teeth. FenderPrime enables a fast, simple and safe restoration of primary teeth.

FUNCTIONFenderPrime is a plastic Wedge with a steel plate, which is inserted into the proximal space. The “boat-shape” of the tip allows the gingiva to be condensed without damages and reduces the risk for bleeding. The long FenderPrime can be bent to adopt to the contour of the tooth.

USAGEFenderPrime is available in two sizes, long and short. FenderPrime green (the long wedge) is bendable. If needed it can easily be secured with a floss.

NEW!

INDICATIONA sectional matrix for small to medium Class II composite fillings, accounting for more than half of all Class II fillings.

FUNCTIONFenderMate is a combined sectional matrix and wedge with a design that achieves a dependable matrix that is easily applied. The side of the wedge facing the adjacent tooth has an angled wing. During insertion, the wing presses the matrix firmly against the preparation, giving a tight seal at the cervical margin. To form the contact point the matrix has a pre-contoured indentation, which enables a natural contact.

USAGEFenderMate is designed to be inserted either buccally or lingually. FenderMate is available in two wedge sizes.

NEW!

INDICATIONFenderPrep protects the adjacent tooth and surrounding gingiva by all major preparations such as crowns, veneers and inlays.

FUNCTIONFenderPrep is a combined wedge and steel plate. It has a thin and “boat-shaped” tip which allows it to be inserted into tight proximal spaces at the same time as it condenses the gingiva without damages.

USAGEFenderPrep can be inserted buccaly or lingually. The steel plate is perforated thus allowing it to be bent before insertion so that it will lean against the adjacent tooth to be protected, providing better space and vision, saves time with increased safety. The wedge with its conical profile is pushed so it sits tightly.

INDICATIONFor protection and separation during tooth preparation. FUNCTIONFenderWedge is a combination of a steel plate and a plastic wedge. Inserted into the interdental space it provides a protector for the tissue and separates the teeth, simplifying the following application of a matrix. USAGEFenderWedge can be applied buccally or lingually for optimal access and vision. It is available in four color coded sizes and should be insert-ed with firm pressure providing a tight stable fit throughout preparation.

3401

-110

9 ©

Dire

cta

AB

Protection and Separation

Matrix for Class II fillings

Protection during larger preparations

Protection and matrix for primary teeth

Protection and Separation Matrix for Class II fillings

Protection during larger preparations Protection and matrix for primary teeth

Left Regular

FenderMate - Matrix for Class II composite fillings

Left Narrow

Right Regular

Right Narrow

FenderPrime - Protection and matrix for primary teeth

Long

Short

FenderPrep - Protection during larger preparations

Regular

FenderWedge® (Registered design) and FenderMate® (Registered Design and Patent pending) are registered trademarks owned by Directa AB.

Green bendable matrix Can be secured with floss

In place from buccal or lingual side Preparation with safe neighbour tooth and gingiva

Convex matrix shape creates natural contact

Flexible wing exerts pressure for maintainedseperation and cervical adaptation

Curves into place

Tight cervical marginal adaptation prevents overhangs

Preparation with safe neighbour tooth...

...and gingiva

Bend plate away from preparation before insertion

...from buccal or lingual sideSeparates during preparationStays in place

Protects adjacent tooth FenderWedge after use

Inserts as a wedge

NEW! NEW!

Protects tooth and gingiva during preparations of crowns and veneers Protection and Matrix for primary teethProtects and seperates Matrix for Class II composite fillings