LATE MODEL WELL MAINTAINEDFABRICATING & WELDING FACILITY

8,000 Komatsu and 6,000 Lb. Hyster Pneumatic Tire Lift Trucks

140 Ton Piranha Model PII-140 Hydraulic Power Ironworker

Messer Model Edgemate EM-100 CNC Plasma Cutting Table

Cincinnati Industrial Auctioneers Inc.2020 DUNLAP ST., CINCINNATI, OHIO 45214 PHONE (513) 241-9701 / FAX (513) 241-6760INTERNET: cia-auction.com for printable brochures, catalog, terms and proxy-bidding

Cincinnati Industrial Auctioneers Inc.SALE UNDER THE MANAGEMENT OF

Featuring: 8’ X 20’ Messer Edgemate CNC Plasma CuttingTable (2004), 325 Ton X 12’ Standard Hydraulic Press Brake (2007),

Piranha PII-140 Ironworker (2002), Geka HYD-70/A Ironworker, ErcolinaTB60 Tube Bender (2002), 1/4’ X 10’ Adira Hydraulic Shear, Roundo ABType IP110/4 Power Bending Rolls, 18” Hem Saw V100LA-2 Auto Tilt

Frame Band Saw, (2) Marvel Tilt Frame Band Saws,Storage Canopies, Lift Trucks, Jib Cranes, Toolroom, Welding,

Shop & Office Equipment

SALE DATE:Tuesday,

January 11thStarting at 9:00 AM

INSPECTION:Monday, January 10th

9:00 AM to 4:00 PM

NEW11/2004

NEW10/2002

BAY WELDING &FABRICATION

BAY WELDING &FABRICATION

1568 Manufacture Drive – Williamsburg, Virginia 2318550 Miles East of Richmond Off I-64

www.cia-auction.comFeatures:Upcoming Sale InformationLiquidation & Equipment SectionEmail Auction NotificationRecent Auction ResultsLot Catalog ListingsPhoto GalleriesDownloadable FormsComplete Terms of SaleStaff ProfilesReference Information

LATE MODEL WELL MAINTAINEDFABRICATING & WELDING FACILITY

18” Hem Saw Model V100LA-2 Auto Feed Tilt Frame VerticalBand Saw

325 Ton X 12’ Standard Industrial Model AB325-12 Hydraulic Power Press Brake w/ CNC Back Gauge

Ordered Sold by Secured Party

Select Items of Major Machinery to be Offered Via

“Live Internet Bidding” at BidSpotter.com

See Instructions on Page 2

To Become a Qualified Bidder on the Internet

NEW10/2007

7

TUESDAY, JANUARY 11TH – 9:00 AMTUESDAY, JANUARY 11TH – 9:00 AM

PLASMA CUTTING TABLEMesser Model Edgemate EM-100 CNCPlasma Cutting Table; S/N EM100-04-4316,Burny Phantom Control; S/N 75421-2104, Accu-Lift Plasma Station Control, 8’ X 20’ MSV ModelS1-7X16 The Slagger Downdraft Table, S/NT40547006867, (1) Plasma & (2) Oxy-AcetyleneCutting Heads, Inner Logic Plasma System, 200Amp Proline 2200 Power Supply; S/N 0681004,Blower Unit, Appears to be a Lightly Used Machine(New 11/2004) SEE PHOTO

PRESS BRAKES325 Ton X 12’ Standard Industrial ModelAB325-12 Hydraulic Power Press Brake w/CNC Back Gauge; S/N F10071623, CNC 300Auto Gauge Automec Back Gauge Control; S/N0807-0868, CNC Back Gage, 144” Bed Length,126” Between Housings, Flush Floor Design, PalmButton & Foot Pedal (New 10/2007)

SEE PHOTO

110 Ton X 10’ Adira Model QHA-10030Hydraulic Power Upacting Press Brake; S/N3472/6795, 100” Between Housings, 122” OverallBed Length, PB Control, Hand Crank & Foot Pedal(New 1993) SEE PHOTO

Press Brake Tooling Consisting of; 12’ 4-WayPunch & Die, 10’ 4-Way Die, Numerous OtherDies in Lengths to 10’

SHEAR1/4” X 10’ Adira Americor Model GHOE-0630 Power Squaring Shear; S/N 2308/6580,96” Squaring Arm, Front Operated Power BackGauge (New 1992) SEE PHOTO

IRONWORKERS140 Ton Piranha Model PII-140 HydraulicPower Ironworker; S/N PII140-153, Punch: 1-3/4” Dia. Thru 1” to 3/8” Dia. Thru 1-1/4”, Shear:1” X 14” to 1/2” X 20” Flat Bar, 6” X 6” X 5/8”Angle, 2” Round Bar, 1 3/8” Square Bar, 4” X 6” X3/8” Coper/Notcher, Foot Pedals (New 10/2002)

SEE PHOTO

70 Ton Geka Hydracrop Model HYD-70/AHydraulic Power Ironworker; S/N 5697, 5” X5” X 1/2” Angle, 18” X 5/8” Flat, 1-3/4” Round, 1-3/4” Square, 1-1/8” Punch Thru 3/4” Stock, Coper,Foot Pedal SEE PHOTO

PUNCHStrippit Super 30/30 Single End Punch; Cat.No. 62000, S/N 121432272, Hand Crank BackManual Gage, Foot Pedal, Tooling SEE PHOTO

BENDING ROLL7 Ga. X 50” Roundo AB Type IP110/4Power Bending Rolls; S/N 2720, 50” X 7 GaugeCap., Pendant Control, 4” Dia. Rolls Forward &Reverse Pendant (New 1995) SEE PHOTO

TUBE BENDER2” Ercolina Type TB60 MicroprocessorControl Power Tube Bender; S/N 6002029,Various Dies (New 2002) SEE PHOTO

SAWS18” Hem Saw Model V100LA-2 Auto FeedTilt Frame Vertical Band Saw; S/N 518696,18” Hydraulic Bar Feed, Control Panel, 1.25” BladeWidth, Coolant in Base SEE PHOTO

(2) 18” Marvel Armstrong Blum Series 8Mark II Tilt Frame Vertical Band Saws;S/N’s 827676, 828109, 33” X 24” Tables, CoolantIn Blase SEE PHOTO

Partial View Late Model Lincoln Welders (3) 300 Amp Lincoln Model Invertec V300-ProInverter Welding Power Sources

Partial View Late Model Miller Welders

7 Ga. X 50” Roundo AB Type IP110/4 Power BendingRolls

Messer Model Edgemate EM-100 CNC Plasma Cutting Table

WEBCAST BIDDER INSTRUCTIONS➢ All Internet bidders must register for this auction at www.bidspotter.com at least 48-Hours Prior to the

Sale Date, if you do not you will not be approved.➢ All Internet bidders must Post a Deposit of Approx. 25% of Your Planned Spending Budget or $5,000.00

Minimum with Cincinnati Industrial Auctioneers in Order to be approved to Bid. Those who do Not Post theDeposit Will Not be Approved. Period.

➢ Only Major Items Will be Available for Online Bidding. Pleaserefer to the Listing on www.bidspotter.com for Available OnlineItems.

➢ There is a 15% Buyer’s Premium in Effect for All Online Purchases.

➢ We Highly Recommend that Potential Buyers Attend this Auction & Bid Live Onsite. This will give you theAbility to Inspect the Items & Fully Appreciate Their Condition, Along with Saving You 3% of the Buyer’sPremium.

No Last Minute Registrations will be accepted. Make Sure to Register & Post Your Deposit No Later than 48-Hours Prior to the Start of the Auction.

1/4” X 10’ Adira Americor Model GHOE-0630 PowerSquaring Shear

110 Ton X 10’ Adira Model QHA-10030 Hydraulic PowerUpacting Press Brake

140 Ton Piranha Model PII-140 Hydraulic PowerIronworker

NEW11/2004

NEW1993

NEW1992

NEW1995

NEW10/2002

BAY WELDING & FABRICATIONBAY WELDING & FABRICATION

Strippit Super 30/30 SingleEnd Punch

United Air SpecialistsModel FJL2-SD FumeHog Dust Collector

(2) 18” Marvel ArmstrongBlum Series 8 Mark II TiltFrame Vertical Band Saws

1/4 Ton X 8’ ArmHandling Systems FloorMounted Jib Crane

WELDING EQUIPMENT &RELATED660 Lbs. Koike Aronson Model LD-300-ABench Top Welding Positioner 330 Lbs. Koike Aronson Model LD-50-ABench Top Welding Positioner400 Amp Miller Model Dimension 400Welding Power Source400 Amp Lincoln Model Idealarc DC-400Welding Power Source; Lincoln LN-7 Wire Feed

300 Amp Miller Model Sychrowave 300AC/DC Tungsten Tig Welder; Coolmate 3Cooling System

(3) 300 Amp Lincoln Model Invertec V300-Pro Inverter Welding Power Sources; w/ LN-7 Wire Feeds SEE PHOTO

300 Amp Lincoln Model Power Mig 300Built-In Wire Feed Welder(3) 250 Amp Lincoln Model Power Mig 255Built-In Wire Feed Welders(2) 150 Amp Miller Maxstar 152 InverterWelding Power Supplies; Snap Start II HighFrequency Arc Station & Radiator 1 CoolingSystem

Pro-Weld CD-513 Stud Welder; S/N 512-074-795, Gun & Leads

Miller Model LMSW-527 Portable SpotWelder; S/N KJ246727

Thermal Dynamics Model Pakmaster 100Plasma Cutter; S/N Y407008A190601

Thermal Dynamics Model Pakmaster 50XLPlasma Cutter; S/N N/A

(2) 5’ X 10’ Heavy Duty Cast Iron AcornStyle Welding Tables SEE PHOTO

Welding Accessories Consisting Of; Bug-OModel Hub-O Motorized Torch Unit VictorMotorized Track Burner, Large Quantity C-Type,Adjustable & Vise Grip Welding Clamps, (4) 5’ X10’ H.D. Welding Tables & Many Other RelatedItems

TOOLROOM EQUIPMENT30” Arm X 12” Col. Sharp Model RD-1230Radial Arm Drill; S/N 14190, 44 - 1500 RPM,Power Feed, 23” X 46” T-Slotted Table Base w/ 23”X 36” T-Slotted Riser Table, Power Elevation &Power Clamp & Coolant SEE PHOTO

3 HP Accupath Model AC-3KV VariableSpeed Vertical Mill; S/N 01177, 60 - 4300 RPMSpindle Speed, 10” X 54” Power Feed Table, NewallTopaz 2-Axis DRO, Power Draw Bar (New 2001)

SEE PHOTO

2 HP Bridgeport Series II Synchro-TraceVertical Mill; S/N 2-205, 11” X 58” Table, True-Trace Tracing Head w/ Hydraulic Power Supply &Bridgeport Synchro-Trace II Control

14” X 54” American Pacemaker GearedHead Lathe; S/N 74424-55, 3, 4 & 6-JawChucks, (2) Steady Rests, Taper Attachment, QuickChange Toolpost SEE PHOTO

Vilh Petersen Model VPF2 Horizontal Mill;S/N 84453, 12” X 51” T-Slotted Table, 40 - 900RPM Spindle

Machine Accessories Consisting of; 12”Rotary Table, (2) 6” Machine Vises, Collets,Perishable Tooling & Other Related Items

OUTDOOR SHELTERS &RELATED(2) 20’ W X 20’ L Modular Steel Shelters24’ Van Trailer for Flat Bed Truck1989 - 40’ Genstar 2394 Cu. Ft. ShippingContainer(8) Various Size Fabricated CantileverRacks

VEHICLE1994 Nissan Diesel Flat Bed Truck; No Title,VIN #JNALG08J1RGN75057, Miles: 95,370Showing, Speedometer Replaced at 130,000 in1999, Approx. 230,000 Total, 24’ Steel Bed

FORKLIFTS & RELATED8,000 LB Komatsu Model FD40ZT-7Pneumatic Tire Diesel Lift Truck; S/N102275A, Fork Spreaders Side Shift, Triple Mast,171” Max Lift Height, 4,500 Hours

6,000 LB Hyster Model H60XM PneumaticTire LP Gas Lift Truck; S/N D177602784P,Side Shift, Triple Mast

JIB CRANES & RELATED1/4 Ton X 8’ Arm Handling Systems FloorMounted Jib Crane; w/ 1/4 Ton Coffing PendantControl Hoist SEE PHOTO

1/4 Ton X 6’ Arm Handling Systems FloorMounted Jib Crane; w/ 1/4 Ton Coffing PendantControl Chain Hoist

1,000 LB Anver Model M100ML-W/L100M2-61 Mechanical Vacuum LifterUnit; S/N S0070007531, 6’ - 10’ Vac. Cup Spacing(New 2007)

AIR COMPRESSORS(2) 10 HP Ingersoll Rand Model 2545 Two-Stage Horizontal Tank Air Compressors;S/N’s 4029475, 3032717 SEE PHOTO

DUST & FUME COLLECTORSUnited Air Specialists Model FJL2-SDFume Hog Dust Collector; S/N 60021535

SEE PHOTO

Kemper Type 6410014 Portable DustCollector; S/N 207329 (New 2008)

(2) Ceiling Hung Smog Filters

SHOP EQUIPMENTShop Equipment Consisting of; Miller Bros.Bench Top End Mill w/ Swivel Vise Fixture & HDSteel Table, Di-Acro No. 1 Hands Punch, 12” DiscSander, Schmidt 6.5 C.F. Sand Blast Tank, S/NK8568, Kranzie Model 2T2 Manual Floor Sweeper,(3) Mag Base Drills, Various Hand & Power Tools,(3) Flammable Liquids Storage Cabinets, Fasteners& Hardware, Toolboxes, Misc. Steel, Racks, SawHorses, Fabricated Parts, Carts, Hand Trucks, Carts,Rolling Tables, D.E. Grinders, Clamps, Chairs,Stools, (3) Pallet Trucks, 10” Disc Sander, SprayGun, (3) Power Hand Grinders, Ready Heater,Dewalt Chop Saw, Shing Grass Trimmer, Shop Vac,DeWalt Compound Miter Saw, Refrigerator,Microwave, Amano PIX-55 Time Clock, (5) Fans &Other Related Items

OFFICE EQUIPMENTOffice Furniture & Computer EquipmentConsisting of; (3) Desks, (4) Chairs, Four-Drawer Files, (2) Two-Drawer Files, (2) Two-Drawer Lateral Files, Brother Fax Machine, CanonImage Class 2300 Copier, Channel Vision 8Channel Security Camera System, Microwave, GERefrigerator, Dell Desktop w/ Lexwork E210Printer, Lian Li Desktop w/ Magic Color Printer, HPDesktop & Other Related Items

325 Ton X 12’ Standard Industrial Model AB325-12 Hydraulic Power Press Brake w/ CNC Back Gauge

14” X 54” American Pacemaker Geared Head Lathe

(2) 10 HP Ingersoll Rand Model 2545 Two-StageHorizontal Tank Air Compressors

(2) 5’ X 10’ Heavy Duty Cast Iron Acorn Style WeldingTables

3 HP Accupath ModelAC-3KV Variable SpeedVertical Mill

70 Ton Geka HydracropModel HYD-70/A HydraulicPower Ironworker

30” Arm X 12” Col. SharpModel RD-1230 RadialArm Drill

2” Ercolina Type TB60Microprocessor ControlPower Tube Bender

NEW10/2007

NEW2002

Cincinnati IndustrialAuctioneers Inc.2020 DUNLAP ST., CINCINNATI, OHIO 45214PHONE (513) 241-9701 / FAX (513) 241-6760INTERNET: cia-auction.com

FIRST CLASS MAIL!

Important MailTO BE DIRECTED TO THE ATTENTION OF EXECUTIVE PERSONNEL☞

All equipment described herein will be sold “asis”, “where is” to the highest bidder or biddersfor cash in accordance with our regular termsand conditions of sale. Unless other satisfactoryarrangements are made, a 25% deposit in cash,certified or cashier’s check payable to CincinnatiIndustrial Auctioneers, Inc., is required on allpurchases. Firm and personal checks acceptedonly if accompanied by a letter from your bankguaranteeing your funds. All sales are subjectto state and/or local taxes unless a signedexemption form is presented at the time of pur-chase. All balances are due at the conclusionof the sale. No merchandise may be removedwhile the sale is in progress. All bidders mustcomply with our Standard Terms of Sale,copies of which will be available at the sale siteor can be obtained from our website.

12% ONSITE BUYER’S PREMIUM 15% ONLINE BUYER’S PREMIUM

TERMS OF SALE

SALE DATETuesday,Jan. 11th9:00 AM

Exit I-64 at Rt. 60 No. 243A Towards Busch Gardens. FollowRt. 60E Approx. 2-1/2 Miles to Blow Flats Rd. Turn Rightonto Blow Flats Rd. & Proceed 1/4 Mile to Commerce Blvd.Turn right then make an Immediate Left on Manufacture Dr.Proceed to Auction Site at End of Street. Watch for AuctionParking Signs & Arrows.

DIRECTIONS

Cincinnati Industrial AuctioneersLicense No. 2906-000234

Jeffrey L. LuggenLicense No. 2905-001388

AUCTIONEERS

TUESDAY, JANUARY 11THTUESDAY, JANUARY 11TH

LATE MODEL WELL MAINTAINED FABRICATING &WELDING FACILITY

BAY WELDING &FABRICATION

Although information has been obtained fromsources deemed reliable, the auctioneer makes nowarranty or guarantee, expressed or implied, as tothe accuracy of the information herein contained. It is for this reason that buyers should avail them-selves of the opportunity to make inspection priorto the sale. This brochure is intended to provide gen-eral information of the equipment being offered and issubject to errors, omissions, additions or deletions.Please check with the Auctioneer’s Office for a finallisting. Items offered may or may not necessarily besold as described and/or photographed in thisbrochure.

MAIL BIDS ACCEPTED WITH A 25% DEPOSIT

IMPORTANT NOTICE:

Cincinnati Industrial Auctioneers Inc.2020 DUNLAP ST., CINCINNATI, OHIO 45214 PHONE (513) 241-9701 / FAX (513) 241-6760INTERNET: cia-auction.com for printable brochures, catalog, terms and proxy-bidding

Cincinnati Industrial Auctioneers Inc.SALE UNDER THE MANAGEMENT OF

PRE-SORTFIRST CLASS

U.S. POSTAGEPAID

CINCINNATI, OHIOPERMIT NO. 3593

SALE DATE:Tuesday, January 11th

STARTING: 9:00AMINSPECTION:

Monday, January 10th10:00 AM to 4:00 PM

BAY WELDING &FABRICATION

BAY WELDING &FABRICATION

1568 Manufacture Drive – Williamsburg, Virginia 2318550 Miles East of Richmond Off I-64

Ordered Sold by Secured Party

BAY WELDING &FABRICATION

1568 Manufacture DriveWilliamsburg, Virginia 23185

50 Miles East of Richmond Off I-64

Messer Plasma Table (2004)

325 Ton Standard Press Brake (2007)325 Ton Standard Press Brake (2007)

Messer Plasma Table (2004)Messer Plasma Table (2004)

325 Ton Standard Press Brake (2007)

140 Ton Piranha Ironworker (2002)

(2) Late Model Lift Trucks(2) Late Model Lift Trucks

140 Ton Piranha Ironworker (2002)140 Ton Piranha Ironworker (2002)

(2) Late Model Lift Trucks

Ordered Sold by Secured Party