Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
1
FALL PROTECT ION BROCHURE
2 3
Connecting Devices Harnesses
TITAN 1-POINT HARNESSFully adjustable design,one size fits all
Sliding back D-ring for comfortable fit,
Durable polyester webbing, Sub pelvic strap,
Manual chest and leg buckles, 45mm chest
strap with metal buckle
1 Point - Rear anchorage
Art No. 1011890
TITAN 2-POINT HARNESS & WORKPOSITIONINGFully adjustable design,one size fits all
Sliding back D-ring for comfortable fit,
front webbing loops, sub pelvic strap,
45mm chest strap with metal buckle,
manual buckles. Conforms to EN361 and EN358
Art No. 1011894
MILLER H-DESIGN Standard webbing, 2pt with webbing loops - Mating bucklesExclusive and innovative harness structure in ‘H’ - Ergonomically placed webbing - Horizontal leg strapsUnique top-down front adjustmentAdjustable chest strap, accessible back D-ring due to its bended position
Size 2 Art No. 1032840Size 3 Art No. 1032841
ELASTOKUIK COMFORTRoatating work-positioning belt, strechable shoulder straps, quick-connect bucklesConforms to EN361 and EN358
Size S Art No. 1003023Size M/L Art No. 1003022Size XL Art No. 1003024
TITAN 2-POINT HARNESSFully adjustable design,one size fits all
Sliding back D-ring for comfortable fit,
Durable polyester webbing, Sub pelvic strap,
Manual chest and leg buckles, 45mm chest strap
with metal buckle 2 Point - Front and rear an-chorage (front webbing loops)
Art No. 1011891
MILLER H-DESIGNStandard webbingExclusive and innovative harness structure in ‘H’ - Ergonomically placed webbing - Horizontal leg strapsAdjustable chest strap, accessible back D-ring due to its bended position1pt - Mating buckles
Size 3 Art No. 1032833
MILLER H-DESIGN Stretch webbing - 2pt with front D-ring - Automatic bucklesExclusive and innovative harness structure in ‘H’ - Ergonomically placed webbing - Horizontal leg strapsUnique top-down front adjustmentAdjustable chest strap, accessible back D-ring due to its bended position
Art No. 1032876Art No. 1032877
MODIFIED R5 REVOLUTION HARNESSPREMIUM 3-PTAutomatic buckles, work positioning belt and pivot link connection, Sliding back D-ring, front webbing loops and side D-rings
Size L/XL Duraflex Art No. 1031661Size XXL Duraflex Art No.1031662
RM HARNESS3pt - workpositioning
Full body harness with elasticated shoulder straps, front anchorage loops, suspension loop, back D ring and positioning belt, feature with automatic buckles
Size S Art No. 1003438Size M/L Art No. 1003439
MC03Work positioning lanyard 2m to 4m with aluminium jaw type adjuster, polyamide rope Ø16mm, Galvanised steel karabiner and alloy snap hook connector, 18mm opening
Lenght 2m Art No. 1002878Lenght 3m Art No. 1002879Lenght 4m Art No. 1002880
2M FORKED WEBBING SHOCK-ABSLANYARDWith screwgate karabiner and2 steel scaffold hooks (opening 55mm)
Art No. 1016761
FORKED MANYARDWith two 63mm scaffold hooks + galvanized connector, stretchable design for greater freedom of movement and safety, when contracted it reduces the risk of tripping, snapping and dragging, reliable visual inspection, improved durability
Length 1,5m Art No. 1013970
TRIPLE ACTION KARABINERML03 Light alloy triple action twistlockkarabiner, opening 22mm, Conforms to EN362 Class B
Art No. 1018971
ANCHORAGE SLINGWebbing anchorage slingHigh breaking strengthConforms to EN795b & EN566
Size 20mm x 1m Art No. 1008362Size 20mm x 1,2m Art No. 1008363Size 20mm x 1,5m Art No. 1008364
HANDZUP2 Aluminium side plate, ABS handle
Aliminium compartment, stainless steel
pivoting cam, 100% polyamide braided rope,
plastic sleeve, rope is interchangeable
Art No. 1032097
TITAN FORKED WEBBING LANYARDWith screwgate karabiner and twoaluminium scaffold hooks(opening 63mm) - 2,0m
Art No. 1013431
TITAN AUTOMATIC ROPE GRABRope grab for both vertical and horizontal applications, durable and corrosion-resistant stainless steel construction, lightweight, includes rope anchorage lineTitan Automatic rope grab 12mm with
10m anchorage line Art No. 101119015m anchorage line Art No. 101170020m anchorage line Art No. 101119130m anchorage line Art No. 1011192
TWIST LOCK KARABINERCS20 Galvanised steel karabiner Weight 0.172kg, Opening 17mm Conforms to EN362 Class B
Art No. 1018963
SCREW GATE KARABINERCS20 Aluminium karabiner Weight 0.085kgOpening 17mmConforms to EN362 Class B
Art No. 1009276
SCREW GATE KARABINERCS20 Galvanised steel karabinerLength 105mm, width 58mm, diameter 10mm, weight 0.18kg, breaking strength >25kNOpening 17mm, Conforms to EN362 Class B
Art No. 1018960
4 5
Rescue & Retrieval Retractable Lanyards
AVIABLOCInertia reel fall arrester - Lifeline, maximum working capacity 2.5mReduces the force impact of a fall, integrated shock-absorber, material 48mm - retractable polyamide webbingWeight 1 unit: 1,25kg
Length 2.5m Art No. 1002871
TURBOLITEShock-absorbing lanyards used in Factor 2, below the back D-ring and not lower than foot level2m – Self retracting webbing lifelineAbrasion resistance and long service lifeCompact & lightweightWebbing and block side twistlock, scaff hook 65mm
Art No. 1018014
FALCON SRL ECO Falcon SRL Eco, Steel Spring, Galvanised steelcable, load indicator with swivel snap hookQuick-activating braking mechanism, highly visible fall indicator, screwgate karabiner, corrosion resistantHigh impact resistant nylon housing
Length 6,2m Art No. 1012433Lenght 10m Art No. 1012434
FALCON SRLFalcon SRL Stainless steel cable, loadindicator with swivel snap hook and swivelkarabiner. Quick-activating braking mechanism, highly visible fall indicator, screwgate karabiner, corrosion resistant
Length 6,2m Art No. 1011729Length 15m Art No. 1011743
FALCON ATEXQuick-activating braking mechanism, highly visible fall indicator, screwgate karabiner, corrosion resistant 10M (replaces 1015191)
Art No. 1017921
TURBOLITEBest alternative to shock-absorbing lanyards used in Factor 2 (below the back D-ring and not lower than foot level), 2m – Self retracting webbing lifeline. Abrasion resistance and long service life. Web WSA 2m C/W SGKWebbing and block side twistlock
Art No. 1018015
MILLER FALCON WEB 6MMiller Falcon Web 6m +CS20Aluminium Snaphook
Art No. 1016796
FALCON SRL ECO Falcon SRL Eco, Steel Spring, Galvanised steelQuick-activating braking mechanism, highly visible fall indicator, screwgate karabiner, corrosion resistant
Falcon SRL Eco, Steel Spring, Galvanised steel cable, load indicator with swivel snap hook
Art No. 1012436 Length 20m Art No. 1012437
FALCON SRLFalcon SRL Stainless steel cable, loadindicator with swivel snap hook and swivelkarabiner. Quick-activating braking mechanism, highly visible fall indicator, screwgate karabiner, corrosion resistant
Length 15m Art No. 1011747Lenght 20m Art No. 1011751
MIGHTYLITETM BLOCKMI57 - Galvanised or stainless steel cableAvailable with webbing, pressed steel housing,stainless steel springs, integrated fall indicator,self retracting lifeline
Lenght 30m Art No. 1004574Lenght 40m Art No. 1004575
MN10 - MILLER ALUMINIUM TRIPOD2 anchorage points, self locking, fullyadjustable legs with rubber feet, complete with one pulleyAluminium tripodConforms to EN795 Class b
Height 2,10m Art No. 1005041
MI65 - MIGHTEVACMI65 - MightEvac fall arrest block, self retracting lifeline with retrieval winch, 4.8mm galvanised or stainless steel cable, pressed steel housing, corrosion-resistant
Length 15m Art No. 1005149Length 30m Art No. 1005160Length 40m Art No. 1005161
ANCHORAGE SLINGMJ00 - Webbing anchorage sling 1mMJ00 - Webbing anchorage sling 1,5m
1m Art No. 10032451,5m Art No. 1002919
MN20 - MANHANDLERMN20 - Manhandler work winch, galvanised wire ropeBrake holding friction disk, housing in steel chromate plating, swivel snap hook, bracket for tripod, Conforms to EN1496
Length 20m Art No. 1005042Length 30m Art No. 1016320
BRACKET FOR MIGHTEVACBracket for MightEvac,MightEvac block: 15m
Bracket for MightEvac,MightEvac block: 30 + 40m
15m Art No. 100533030 + 40m Art No. 1005331
SAFESCAPE ELITE TM WITH HOISTSafEscape ELITE TM with hoist and ropeHigh-quality anodised aluminium housingCentrifugal brake controls descent and reduces vibrationDescent loads possible from 30kg-250kg (2 people)Conforms to EN341:2011 and meets ANSI and OSHA requirements
20m Rope Art No. 102876940m Rope Art No. 102877160m Rope Art No. 1028773
Other models and custom lenghts available upon request
SAFESCAPE ELITE TM WITH HOIST & HANDLESafEscape ELITE TM with hoist & handleHigh-quality anodised aluminium housingCentrifugal brake controls descent and reduces vibrationDescent loads possible from 30kg-250kg (2 people)Conforms to EN341:2011 and meets ANSI and OSHA requirements
20m rope Art No. 102915050m rope Art No. 102915380m rope Art No. 1029156
Other models and custom lenghts available upon request
SCAFFOLD HOOKML04 Aluminium double action scaffold hook, opening: 63mm (Used for rescue Pole connection)
Art No. 1018977
TELESCOPIC POLEVertiGo 3m telescopic rescue pole
Art No. HSE1085
6 7
QUICKPICK STANDARD KITQuickPick Standard Kit 22.86M working length rescue system.Kit includes pulleys, rope,extension pole with clip,pigtail, rope control handle,karabiners, cross-arm anchorageconnector, Miller WristBanditTool Lanyard, kit bag, andpole bag
QuickPick Standard Kit 30.48M working length rescue system. Kit includes pulleys, rope, extension pole with clip, pigtail,rope control handle, karabiners, cross-arm anchorage connector, Miller WristBandit Tool Lanyard, kit bag,and pole bag
22.86M Art No. QP-1/75FT30.48M Art No. QP-1/100FT
QUICKPICK PREMIUM KITQuickPick Premium Kit 22.86Mworking length rescue systemwith backup braking system.Kit includes backup brakingsystem, pulleys, rope,extension pole with clip,pigtail, rope control handle,karabiners, cross-arm anchorageconnector, Miller WristBanditTool Lanyard, kit bag, andpole bag
QuickPick Premium Kit 30.38M.working length rescue system withbackup braking system. Kit includes backup braking system, pulleys, rope, extension pole with clip, pigtail, rope control handle, karabiners, cross-arm anchorage connector, Miller WristBandit Tool Lanyard, kit bag, and pole bag
22.86M Art No. QP/75FT30.38M Art No. QP/100FT
Rescue & Retrieval
The Söll Xenon 2.0 Horizontal Lifeline System is an innovative height safety solution that conforms to new EN 795:2012 standards and regulations*. It’s a high quality, durable system made of corrosion resistant stainless steel and is ideally suited to industrial applications like working on crane runways, loading bays and roofs.
The system also doubles as an anchorage point to easily rescue workers should they fall. If a fall occurs, this effective system ensures structural damage is prevented. The Lifeline System incorporates a unique, state-of-the-art shock absorber, which uses patented Miller ‘Force-dispersal Technology’ to provide fall protection for up to seven workers across a maximum span of 20m (1X19 cable, 8mm wide), depending on the line configuration.
The new Söll Xenon energy absorber functions as a four-in-one device: a tension indicator, a cable tensioner, an energy absorber and a fall indicator. Only one energy absorber is necessary for all installations, irrespective of whether it’s an overhead or standard installation (on posts or against walls).
A new Söll Xenon overhead shuttle completes the system allowing for heavy usage with self retractable lifelines up to 20kg.
COMPLIANCE AND TESTINGThe Söll Xenon 2.0 Horizontal Lifeline System complies with EN 795:2012, the latest European standard for anchor devices*.
• To demonstrate that the system would prevent structural damage following a fall as well as provide anchorage to rescue workers, it successfully passed a dynamic strength and integrity test with a mass of 100kg, plus a further 200kg for three minutes.
• To prove how effective the Miller ‘Forcedispersal Technology’ would perform if up to seven workers fell consecutively the system was put through a ‘multiple fall’ test. A test mass of 200kg (representing two workers) was initially dropped followed by five more masses weighing 100kg each (representing five workers). To test for structural integrity, an extra 650kg was added to the load for three minutes.
*System also complies with therequirements of OSHA, ANSI and AS/NZS
SÖLL XENON® 2.0 HORIZONTAL LIFELINE SYSTEMDesigned for industrial applications (crane runways, loading bays...) and roofing.
FEATURES & BENEFITS• Conforms to EN 795:2012 standard• Guarantees structural integrity and protects up to seven workers• The unique multi-functional shock absorber prevents damage to a
variety of structures• The standard and overhead shuttle have excellent sliding performance
Standard shuttle Overhead shuttle For Miller trained professional installers only
Permanent Fall Arrest Systems
TEMPORARY HORIZONTAL LIFELINEWebbing mobile lifeline with anchorage sling 20M
Art No. 1011160
RESCUE BAGMediuam Rescue Bag Holds 100M of11mm Rope
Art No. 1010191
8 9
SÖLL GLIDELOC® SAFE CLIMBING SYSTEMDesigned for industrial applications (crane runways, loading bays...) and roofing.
Söll GlideLoc® Safe Climbing System, permanently installed on buildings, towers, masts, etc… comprises a guided type fall arrester, vertical and horizontal guide rails or fall protection ladders, and a wide range of mounting brackets and accessories that adapt the system to most structures.
Enhanced SafetyIn contrast to temporary rope systems, Söll guide rails withstand constant wear and tear and allow a combination of vertical and horizontal access without having to disconnect.
VersatilityAvailable in both straight and curved form in a variety of materials to suit the workenvironment. Guide rails can be retrofitted to existing ladders.
User Comfort and ErgonomicsThe fall arrester glides smoothly along the rail without any manual guidance, reducing user fatigue. This is the only system that allows the user to lean forward or backwards.
EconomicDesigned to withstand the toughest environmental conditions, Söll fixed systems offer a long-term economical investment with minimal maintenance.
Söll GlideLoc® systems are available as ladders as well as guide railsFall protection ladders have an integrated guide rail for the guidedtype fall arrester in the centre. They are available in aluminium, galvanized steel and stainless steel, either with or without side stringers:
Anodized AluminiumFor high corrosion and distortion resistance, good appearance and ergonomic support.
Hot dipped galvanised steelThe cost effective solution for general applications.
Stainless steelSuitable for harsh environments such as chemical plants, food industry, off-shore and industrial chimneys and shafts.
SÖLL SAFELINE 2.0 HORIZONTAL LIFELINE SYSTEMDesigned for rigid roof applications.
FEATURES & BENEFITS• Exceptional shock absorber guarantees structural integrity for roofing
applications following EN 795:2012 standard• An easy to install system with few components that protects up to three workers• System doubles as anchorage to rescue fallen workers The Söll SafeLine 2.0
Horizontal Lifeline System is an easy to install anchorage device, ideal for roofing applications. The system consists of a limited number of components that need no specific tooling.
The Söll SafeLine 2.0 Horizontal Lifeline System conforms to new EN 795:2012 standards and regulations. It’s a high quality, durable system made of corrosion resistant stainless steel and is ideally suited to roof installations. The system also doubles as an anchorage point to easily rescue workers should they fall. If a fall occurs, this effective system prevents structural damage.
The Lifeline System incorporates a unique, state-of-the-art shock absorber, which uses Miller patented ‘Force-dispersal Technology’ to provide fall protection for up to three workers across a maximum span of 15m, depending on the characteristics of the lifeline.
Easy to install shock absorber with exceptional performance The Söll SafeLine absorber can be easily and rapidly fixed with the axles and pins provided. The black shrink tube around the shock absorber is UV-resistant.
The shock absorber has been designed to disperse energy during a fall to protect both workers and the roof structure. Its patented ‘Force-dispersal Technology’ ensures that energy is distributed evenly when the shock absorber is deployed.
Söll SafeLine can only be installed by qualified installers who have undergone appropriate training.
EASY TO ORDER KIT WITH INSTALLATION ESSENTIALSSöll Safeline is proposed as a kit containing the new shock absorber, a tensioner with integrated tension indicator, cable end clamps and an identity plate. Additionally to these essential components, only intermediate parts and the correct cable length need to be ordered.
COMFORTThe triple action karabiner is self locking and made from lightweight aluminium. It ensures extremely short arrest distances and low arrest forces.
Art No. 22697
UNIVERSAL IICan be inserted into or detached from the rail at any location. The body and the opening mechanism of the patented fall arrester are made from stainless steel.
Art No. 23531
COMFORT2
Made entirely of stainless steel. The functional design of COMFORT2 is identical to the aluminium shuttle and offers additional advantages since it is designed for severest stress, is extremely durable and easy to clean.
Art No. 23331
COMFORT UKThis triple action karabiner is self-locking and has strap webbing for rescue actions which require the cutting free of the injured person.
Art No. 23109
Permanent Fall Arrest Systems Permanent Fall Arrest Systems
10 11
SÖLL PIVOTLOCThe foldable ladder system prevents unauthorisedpersons from climbing theascent route and is visually much less obtrusive than aladder. (see page 394).
Y-SPARCost-effective alternative.The low surface area keeps wind loads applied to the sub-structure to a minimum.
TURNTABLEAllows safe continuoustransfer from laddersto horizontal rail andvice versa withoutdisconnecting.
HORIZONTAL GUIDE RAILAvailable both straightand curved, which allowssafe access along narrowplatforms.
FOLDING FOOTRESTSMust be provided asrest platforms at regulardistances in case of highascent routes for addedsafety.
ROTARY EXIT SECTIONRotary exit sectionClimbers can safely accessand egress the top of theguide rail while standing onthe upper platform.
TWIN LADDERThe operator can glidehis hands along the sidestringers when ascendingwithout having to hold ontothe rungs. Ideal for dirtysurroundings. Offers highdistortion resistance.
TWISTED CHANGE-OVER RAILAllows a climber to movesafely onto a roof or aplatform away from theedge of the roof beforedisconnecting from thesystem.
HO-VER TURN TABLESimple means of changingdirection from the end of avertical rail to a horizontalrail and vice versa.
VERTICAL GUIDE RAILCan be assembled onexisting ladders, stepirons etc. An ascent routeprotected in this way offersthe same protection as Söllsafe climbing systems.
EXIT SECTIONA climber can detach the fallarrester from the rail afterascending and insert it intothe rail before descending.
1
2
3
4
5
6
7
8
9
10
11
1
2
3
4
5
6
7
8
9
10
11
3
2
3
Permanent Fall Arrest Systems Permanent Fall Arrest Systems
SÖLL MULTIRAIL®
Stainless steel and aluminium Horizontal Rail System
FEATURES & BENEFITS• New state-of-the-art aluminium rail system
• Quick and easy installation with great fixation
distances up to 6m
• Guarantees protection for up to 6 users
• Conforms to EN 795:2012 type D standard
The Soll MultiRail HorizontalRail System conforms to
the latest Eurpoean standard EN 795:2012 type D and
CEN/TS 16415:2013 regulations for horizontal ancor
devices.
This rail offers the highest level of fall protection to
people along the entire fall risk area. Soll MultiRail is
not only for instalation at foot level or overhead but
can also be installed sideways for use as a handrail.
The high quality stainless steel product line resistant
in the toughest environmental conditions has been
extended with an aluminium system to provide
the best pice-quality solution for low-corrosive
work environments. Soll MultiRail ofers an adapted
solutions for any industrial building or wind energy
terbine. The elegant design of the aluminium
solution makes it an aesthetic safety solution for
commercial and historical buildings. Various fixation
possibilities are available for different structures.
Just a few bolts and tools are required for a quick
and easy assembly of the rail system.
Soll MultiRail provides fall protection for up to 6
workers across a maximum span of 6m, depending
on the rail configuration. If all occurs, this
effective system ensures that structural damage is
prevented through energy absorption by the several
intermediate brackets and the end-fixing devices.
Four different runners ensure smooth movement of
the worker along the rail: closed runner for frequent
use of the same rail, openable runner for flexible use
on several rail systems, wheeled runner for overhead
applications and a lockable runner for working
situations where the shuttle should not move.
Robust rail system that is quick
and easy to install.
In case of a fall,the energy
is reduced by the bending of
the rail, thereby the structure
remains protected. The low
friction mounting brackets
transmit in the event of a fall
the absolute minimum impact to
the structure. In conformaty with
the EN795:2012 standard, the
rail can absorb forces up to 70kg
without permanent deformation.
The rail is not fixed into
mounting brackets and therefore
compensates for thermal
expansion. Easy connection
of curves, T-and X-junctions
allow the system to be easily
customized to any structure.
EN 795:2012COMPLIANT
12 13
SÖLL MULTIRAIL® MOBILE ANCHOR POINTS
VERTIGO 2-PT HARNESSRear and Front Anchorage
Art No. VHF001
VERTIGO MPH2 ROPE ACCESSFULL BODY HARNESS With front, rear and side d-rings, shoulderand back strap padding, comes withdetachable standing step attachments and standard quick release buckles/d-rings. Reflective webbing.
Art No. VHS001
VERTIGO 2-PT HARNESSWith double lanyard and 2 scaffold hooks.Rear and Front Anchorage
Art No. VK003
VERTIGO 1-PT HARNESSWith double tie-back lanyard and 2 snap hooks.
Art No. VK002
VERTIGO MINERS HARNESSWith suspension leg strap, waist belt,cap lamp belt and padded leg strap.Quick release buckles.
Art No. VHM001
VERTIGO MPH2 ROPE ACCESSFULL BODY HARNESS With front, rear and side d-rings, shoulder and back strap padding, comes with detachable standing step attachments and aluminium quick release buckles/d-rings. Reflective webbing.
Art No. VHS002
VERTIGO 1-PT EASYFIT HARNESSWith double lanyard and 2 scaffold hooks
Art No. VK007
VERTIGO 1-PT EASYFIT HARNESSWith double lanyard and 2 snap hooks2x Snap Hooks
Art No. VK014
LIGHTWEIGHT
Fall Arrest Kits
VertiGo Fall arrest products are designed to meet the high demands of industry. Features include high-quality fittings, a highly visible webbing, reflective stitching and easy adjustability which promotes user acceptance
Fall Arrest and Full Body Suspension Harnesses Permanent Fall Arrest Systems
OVERHEAD RUNNER
Art No. 24168Art No. 1014608
LOCKABLE RUNNER
Art No. 26308Art No. 1032550
CLOSED RUNNER
Art No. 17407Art No. 1013517
OPENABLE RUNNER
Art No. 17792Art No. 1013518
14 15
Fall Arrest Lanyards and Rope Grabs
VERTIGO 1.8M DOUBLE TIE-BACK LANYARDWith karabiner and 2 snap hooks.
Art No. VL003
VERTIGO 12MM NYLON ROPEProtective sleeve, 2M rope grab comeswith 10m karabiner and safety snap hook.
Art No. VWPL001
VERTIGO 1.8M ADJUSTABLE DOUBLE LANYARD With karabiner and 2 scaffold hooks.
Art No. VL002
VERTIGO 12MM NYLON ROPEProtective sleeve, 2M rope grab comeswith aluminium karabiner with captive eye and safety snap hook.
Art No. VWPL002
Horizontal Lifelines and Rescue
VERTIGO HORIZONTAL LIFELINE 20M SYSTEMThe VertiGo Horizontal Anchorage Lifeline, equipped with the VertiGo Ratchet Tensioner, allows easy tensioning of the lifeline between two supports. The system is supplied in a bag which has comfortable shoulder straps, allowing it to be carried easily. The bag is permanently attached to the assembly and once fitted, any extra webbing stays in the bag.
Art No. VHLL001
VERTIGO “R” UNIVERSAL RESCUE SYSTEMHSE Solutions introduces the VertiGo Rescue kit, one of the most versatile rescue and utility systems available today. This lightweight, compact universal system can be setup in a matter of seconds and can perform a wide variety of functions. The user can raise or lower themselves without the aid of a co-worker. Additionally the VertiGo “R” may be utilised to raise and lower tools to a worker located in a confined area.
System ComponentsThe standard components of the VertiGo “R: consists of:• Rescue utility system: raising and lowering system with a 4:1 advantage• 100m or 200m of kernmantle rope (VR001 or VR002 respectively)• Rope control handle with 1m safety cord• Two karabiners• One scaffolding hook• Telescopic pole and hook attachments
VertiGo “R” – Rescue kit 25m system complete with bag and pole Art No. VR001VertiGo “ R” – Rescue kit, 50m system complete with bag and pole Art No. VR002
APPLICATIONSThe VertiGo “R” has a large range of uses and can be used as assisted lowering, individual rope access operations in conjunction with a vertical lifeline or controlled descent rescue.
16
Accessories and Fitting Instructions
Take the harness out of the packaging, and hold by the back d-ring. Gently shake the harness so all the straps fall into place.
Unbuckle the leg and chest strap buckles if they are fastened. To unbuckle, lift the top plate so that it aligns with the slots in the bottom plate. Using thumb and finger, guide the small plate through slots.
Slip harness over the shoulders (like a jacket) so that the d-ring is located in the middle of the shoulder blades.
Pull right leg strap between legs and fasten with corresponding buckle on right hand side. To fasten, tilt the smaller top plate, and place through the slots in the bottom plate from underneath. Follow through until top plate rests flat on the bottom plate. Repeat process with the left hand leg strap. Make sure the leg straps are not crossed or twisted between your legs.
Fasten the chest strap buckle. Run your hands over the harness to ensure there is no twisting or bunching. If a strap appears to be lying incorrectly, remove your harness and refit it as per the instructions supplied. Only properly trained personnel are to use this equipment.
VERTIGO LINESMAN HELMETWITH CHIN STRAPArt No: VLH001
VertiGo Chin strapsProduct Number: VCS001
VERTIGO SHOULDER/LEG STRAPProduct Number: VWP001
VERTIGO HARNESS RELIEF STEPSold in pairs
Product Number: VSS001
FITTING INSTRUCTIONS
1 2 3 4 5
1 2 3 4 5
Block C, Tunney Ridge Business Park, Sam Green Road
Elandsfontein, Germiston, South Africa
T +27 (0)11 971 8040 | F +27 (0)11 971 8065
[email protected] | www.hsesolutions.co.za