Embed Size (px)
Citation preview
EZSpeed Audit Software QuickStart Guide v140427a!
!EZSpeed Audit: QuickStart Manual!!
� !!Main Features:!!• Design to use in an audit environment!• Single view door at the time!• Pre-selected a door or window !• User can export the data in multiple formats!• VIN recording is an available option!• Connect to one EZSpeed Wifi unit!!Software Options [tab]:!!View/Configure!User can toggle buttons to read out the EZSpeed that is connected to the Audit Software, to view and configure the specification of a door, and to review the measurements taken on multiple VIN/cars and their graphical representation. !!Vehicles!User can add new VIN/car to expand the measurement project.!!Locations The options are intuitively laid out and users can selectively measure or review the data measured on different closures on a car including (1) Left Front Door, (2) Right Front Door, (3) Left Rear Door, (4) Right Rear Door, (5) Left Front Window, (6) Right Front Window, (7) Left Rear Window, (8) Right Rear Window, (9) Trunk, (10) Sunroof. Data are automatically grouped based on user selection before measurement is taken.!!Reporting!User can export selected data in the format of Excel, CSV or Chart.
Page � / �1 4by C.J. Lo / [email protected] / +86 138 288 32372
EZSpeed Audit Software QuickStart Guide v140427a!
!Panels!!
Measurement!!This panel allows user to select or erase runs and data. All measurement details are logged including VIN, name of the vehicle, speed, the date/time when a measurement is taken and the evaluation that tells if the door speed is within or outside of tolerance, or if a door is not closed.
Tolerances!!This panel allows users to input specifications of the measurement including upper and lower tolerances, warning band, and an optional minimum gap set to enhance operation.
EZSpeed Units!!This panel displays information of a EZSpeed that is currently connected to the Audit Software
Barcode Scanner!!Audit software provides the option to use a barcode scanner that is compatible with the system.
Page � / �2 4by C.J. Lo / [email protected] / +86 138 288 32372
EZSpeed Audit Software QuickStart Guide v140427a!
!!!!!
Locations (value)!!Audit software provides real time display of the measurement values, and the minimum value that is last recorded including a traffic light display showing red (out of tolerance), yellow (warning) and green.
Locations (graphing) !!This window provides a graphical representation of measurement history of multiple cars on a selected location of a car (e.g. Right Front Door), including all speed values that contribute to closing or not-closing of a door. User can overlook the trending of the minimum door speed, audit how each speed measurement are taken, and can possibly improve the operation by pre-setting a minimum gap.
Locations (graphing cont’)!!User can hover on a data point to read the speed value off the graphical display.
Page � / �3 4by C.J. Lo / [email protected] / +86 138 288 32372
EZSpeed Audit Software QuickStart Guide v140427a!
!Reporting!!
!!!!
CSV !!CSV reporting exports measurement data including all speed values, evaluation, location of the door being measured, name of the vehicle, description, VIN, date/time of the measurement, and information of the EZSpeed.!
Excel!!Excel option exports the minimum speed or estimated closing speed, as well as the evaluation of the measurement, location of the door being measured, name of the vehicle, VIN, and date/time.
Chart!!Chart reporting outputs the graphical representation of the measurement data including speeds that are unclosed, assumed closed (automatically determined by the software if speed value is above the closed value), closed, and lowest closed speed. Such representation provide user a convenient overview from the mass data recorded.
Page � / �4 4by C.J. Lo / [email protected] / +86 138 288 32372
