Upload
jesf2014
View
480
Download
52
Tags:
Embed Size (px)
DESCRIPTION
Exporting Contour Map from Petrel To OFM
Citation preview
Exporting Contour Map from Petrel To OFM:
1) Open your Project in Petrel and show the surface that you want to export its contour map.
2) Right click on that surface and then choose Setting as shown below:
3) In the setting window, choose Style. Then click on ( make a contour object in Petrel
explorer based on the current settings) and click OK then you will find new contour map
for that surface in the Input pane as shown below:
4) Now right click on this new contour map surface and choose Export and save it as
*.CPS-3 lines, as shown below:
5) The result file will be *.CPS-3 and now use the Petrel_to_OFM.exe convertor which
already exists in Ticket no.(4160512) to change the extension of the file to *.ANO and
shown below:
6) Now, open OFM and you can import the contour map file by go to Setup and Import,
then Data loader as shown below:
7) And you will get the contour map uploaded to your OFM project as shown below: