1
S A Gauge manufactures easy to handle, robust testing kits designed for troubleshooting on hydraulic, air and vacuum systems. Sizes and configurations other than indicated below are also available on request. Due to continuous product development, product might vary from brochure. *E&OE. Please contact S.A Gauge to verify. TKL TKM GAUGE vacuum : 0...60 / 100 kPa compound : -100...0...+150 / 300 / 500 / 700 / 900 / 1500 / 2400 kPa pressure : 0...60 / 100 / 160 / 250 / 400 / 600 / 800 / 1000 / 1600 / 2500 / 4000 / 6000 kPa 0...6 / 10 / 16 / 25 / 40 / 60 MPa Standard pressure ranges Other units of pressure or vacuum such as psi and inHG etc. Dual scales, such as MPa / psi, or bar / psi. Optional scales Test hose to your requirements Test connectors to customer requirements Kits standard with: M16 x 2 male connector mounted on panel. (other thread sizes on request ) TKS TKM TKL TKQ Steel carry case ( with storage space for hoses & fittings underneath hinged mounting plate ) Pressure ranges Test hose Test connectors Optional extras Pressure gauge quantity and size per kit ( glycerine filled ) Lightweight steel carry case, powder coated. Size 265mm long x 210mm wide x 105mm high. 2, 3, 4, 5, or 6 x 63mm dia 2, 3, or 4 x 80mm dia 1 or 2 x 100mm dia 1 x 160mm dia ( other combinations and configurations on request ) Lightweight steel carry case, powder coated. Size 330mm long x 240mm wide x 105mm high. 2, 3, 4, 5, 6 or 8 x 63mm dia 2, 3, 4 or 6 x 80mm dia 1, 2, 3 or 4 x 100mm dia 1 x 160mm dia ( other combinations and configurations on request ) Lightweight steel carry case, powder coated. Size 360mm long x 360mm wide x 170mm high. 8 or 10 or 13 x 63mm dia 9 x 80mm dia 6 x 100mm dia 1 x 160mm dia ( other combinations and configurations on request ) Heavy duty stainless steel 304 case with rubber cover. Case dia: 160mm 3 x 50mm dia. Glycerine filled 1m test hose included M16 x 2 female swivel Test connectors to customer requirements. 1 x - 30 inHG ...0...+150 psi 1 x 0...600 psi 1 x 0...6000 psi other units of measure available on request Hose not included with kit Available in ( available as optional extra because of variable length requirements ) ( standard with M16 x 2 female swivel nuts both ends ) : In 1m, 2m, 3m, 4m lengths TKS Data Sheet P TKS3 PRESSURE MEASUREMENT Page 16 TKS Series TKL Series TKM Series TKQ Series Pressure Testing Kits GAUGE A S TKQ

Expo 2012 full - SA Gauge Pressure - Testing Kits.pdf · 2012. 11. 26. · Title: Expo 2012 full.cdr Author: jackie Created Date: 11/26/2012 2:24:01 PM

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

  • S A Gauge manufactures easy to handle, robust testing kits designed for troubleshooting on hydraulic, air and vacuum systems. Sizes andconfigurations other than indicated below are also available on request.

    Due to continuous product development, product might vary from brochure. *E&OE. Please contact S.A Gauge to verify.

    TKL

    TKM

    GAUGE

    vacuum : 0...60 / 100 kPacompound : -100...0...+150 / 300 / 500 / 700 / 900 / 1500 / 2400 kPapressure : 0...60 / 100 / 160 / 250 / 400 / 600 / 800 / 1000 / 1600 / 2500 / 4000 / 6000 kPa

    0...6 / 10 / 16 / 25 / 40 / 60 MPa

    Standard pressure ranges

    Other units of pressure or vacuum such as psi and inHG etc.Dual scales, such as MPa / psi, or bar / psi.

    Optional scales

    Test hose to your requirementsTest connectors to customer requirements

    Kits standard with: M16 x 2 male connector mounted on panel. (other thread sizes on request )

    TKS TKM TKL TKQ

    Steel carry case( with storage space forhoses & fittingsunderneath hingedmounting plate )

    Pressure ranges

    Test hose

    Test connectors

    Optional extras

    Pressure gaugequantity and sizeper kit( glycerine filled )

    Lightweight steel carry case,powder coated.Size 265mm long x 210mmwide x 105mm high.

    2, 3, 4, 5, or 6 x 63mm dia2, 3, or 4 x 80mm dia1 or 2 x 100mm dia1 x 160mm dia( other combinations andconfigurations on request )

    Lightweight steel carry case,powder coated.Size 330mm long x 240mmwide x 105mm high.

    2, 3, 4, 5, 6 or 8 x 63mm dia2, 3, 4 or 6 x 80mm dia1, 2, 3 or 4 x 100mm dia1 x 160mm dia( other combinations andconfigurations on request )

    Lightweight steel carry case,powder coated.Size 360mm long x 360mmwide x 170mm high.

    8 or 10 or 13 x 63mm dia9 x 80mm dia6 x 100mm dia1 x 160mm dia( other combinations andconfigurations on request )

    Heavy duty stainless steel304 case with rubber cover.Case dia: 160mm

    3 x 50mm dia.Glycerine filled

    1m test hose included

    M16 x 2 female swivel

    Test connectors to customerrequirements.

    1 x - 30 inHG ...0...+150 psi1 x 0...600 psi1 x 0...6000 psi

    other units of measureavailable on request

    Hose not included with kitAvailable in

    ( available as optional extra because of variable length requirements )

    ( standard with M16 x 2 female swivel nuts both ends ): In 1m, 2m, 3m, 4m lengths

    TKS

    Data Sheet P TKS3

    PRESSURE MEASUREMENT

    Page 16

    TKS Series

    TKL Series

    TKM Series

    TKQ Series

    Pressure Testing KitsGAUGE

    AS

    TKQ