Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
www.prolight.co.uk Evora 1000 Spot User Manual 2
Safety advice
WARNINGFOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP!• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.
• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.
• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessaryfortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.
• Pleasenotethatdamagescausedbyusermodificationstothisequipmentarenotsubjecttowarranty.
IMPORTANT:The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment.
OPERATING DETERMINATIONSIfthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageandthewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.
Donotendangeryourownsafetyandthesafetyofothers!
Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.
CAUTION!KEEP THIS EQUIPMENT AWAY FROM RAIN, MOISTURE AND LIQUIDS
CAUTION! TAKE CARE USING THIS EQUIPMENT!HIGH VOLTAGE-RISK OF ELECTRIC SHOCK!!
• Neverletthepowercablecomeintocontactwithothercables.Handlethepowercableandallmainsvoltageconnectionswithparticularcaution!
• Neverremovewarningorinformativelabelsfromtheunit.
• Donotopentheequipmentanddonotmodifytheunit.
• Donotconnectthisequipmenttoadimmerpack.
• Donotswitchtheequipmentonandoffinshortintervals,asthiswillreducethesystem’slife.
• Onlyusetheequipmentindoors.
• Donotexposetoflammablesources,liquidsorgases.
• Alwaysdisconnectthepowerfromthemainswhenequipmentisnotinuseorbeforecleaning!Onlyhandlethepower-cablebytheplug.Neverpullouttheplugbypullingthepower-cable.
• Makesurethattheavailablemainssupplyvoltageisbetween100~240VAC,50/60Hz.
• Makesurethatthepowercableisnevercrimpedordamaged.Checktheequipmentandthepowercableperiodically.
• Iftheequipmentisdroppedordamaged,disconnectthemainspowersupplyimmediatelyandhaveaqualifiedengineerinspecttheequipmentbeforeoperatingagain.
• Iftheequipmenthasbeenexposedtodrastictemperaturefluctuation(e.g.aftertransportation),donotconnectpowerorswitchitonimmediately.Thearisingcondensationmightdamagetheequipment.Leavetheequipmentswitchedoffuntilithasreachedroomtemperature.
• Ifyourproductfailstofunctioncorrectly,stopuseimmediately.Packtheunitsecurely(preferablyintheoriginalpackingmaterial),andreturnittoyourProLightdealerforservice.
• Onlyusefusesofsametypeandrating.
• Repairs,servicingandpowerconnectionmustonlybecarriedoutbyaqualifiedtechnician.THISUNITCONTAINSNOUSERSERVICEABLEPARTS.
• Thislightingfixtureisforprofessionaluseonly-itisnotdesignedfororsuitableforhouseholduse.Theproductmustbeinstalledbyaqualifiedtechnicianinaccordancewithlocalterritoryregulations.Thesafetyoftheinstallationistheresponsibilityoftheinstaller.Thefixturepresentsrisksofsevereinjuryordeathduetofirehazards,electricshockandfalls.
• Warning!RiskGroup2LEDproductaccordingtoEN62471.Donotviewthelightoutputwithopticalinstrumentsoranydevicethatmayconcentratethebeam.
• WARRANTY:Twoyearsfromdateofpurchase.
www.prolight.co.uk Evora 1000 Spot User Manual 3
Product overview & technical specifications
TheEvora1000Spotfeaturessupersmooth3phasemotorsandahostoffeaturesmakingthisanidealfixtureforlargereventsandvenues.The180WLEDandcolourwheelcoupledwitha3facet,indexablerotatingprismplus5facetlinearrotatingindexableprismandremotefocusproducerichvibrantcoloursand2gobowheels(9staticand7rotating)provideahostofsuperbanimatedeffects.Pan/tiltautocorrectionand16bitpositioningmakethisfixtureperfectforrentalandinstallationalike.
•1x180WwhiteLED
•Beamangle:12°
•44,100Lux@2m
•3.6kHzrefreshrate
•Motorisedfocus
•3facetcircularrotatingindexableprismplus5facetlinearrotatingindexableprism
•Frostfilter
•Gobowheel1:7rotating,indexable,replaceablegobos+open
•Gobowheel2:9staticgobos+open
•Colourwheel:7colours+open
•DMXchannels:15
•RDM(RemoteDeviceManagement)
•Auto,soundactiveandmaster/slavemodes
•Pan/tiltautocorrection
•16-Bitpan/tiltpositioning
•Pan:540°,Tilt:270°
•0-100%dimmingandvariablestrobe
•Suppliedwithquickreleaseomegaclamps
•6pushbuttonmenuwith1.8”LCDdisplay
•PowerCONinput/output
•3-PinXLRinput/output
•5-PinXLRinput/output
•Fancooled
Evora 1000 Spot
Specifications Evora 1000 Spot
Powerconsumption 290W
Fuse T4A250V
Powersupply 100~240V,50/60Hz
Dimensions 560x390x290mm
Weight 16.4kg
Ordercode ELUM023
0m 1m 2m 3m 4m 5m
12° - Lux 176000 44100 19560
12°
11000 7060
560mm
390mm 290mm
www.prolight.co.uk Evora 1000 Spot User Manual 4
Technical specifications
01-Earthpoint
02-LCDdisplay
03-Functionbuttons
04-Microphone
05-3-PinDMXinput
06-3-PinDMXoutput
07-5-PinDMXinput
08-5-PinDMXoutput
09-PowerCONinput
10-PowerCONoutput
11-FuseT4A250V
12-Fans
Inthebox:1 x fixture, 2 x omega clamps, 1 x power cable & 1 x user manual
POWER INPUT:100-240V~50/60Hz
FUSE: T4A 250V
3-P
IN D
MX IN
PU
T
5-P
IN D
MX IN
PU
T
3-P
IN D
MX O
UTP
UT
5-P
IN D
MX O
UTP
UT
100-240V~50/60HzPOWER OUTPUT:
POWER CONSUMPTION: 290WDISPLAY BACKUP MIC
MENU UP
LEFT ENTER RIGHT
DOWN
Evora 1000 Spot
12
07
05
11
02 03 12 01 10 08
09 06
04
12
www.prolight.co.uk Evora 1000 Spot User Manual 5
Operating instructions
Control Panel Menu:
TheLCDcontrolpanelsituatedonthefrontofthefixtureallowstheusertoaccessthemenusystemtoadjustthefixturessettings.
Whentheunithasbeenpoweredonitwillshow“Software Update Please Wait...”followedby“Motor Reset Please Wait...” and“eLumen8 Evora 1000 Spot”.Thefixturewillthenreturntoitshomescreen.
Pressingthe“MENU”buttononcewilltaketheusertothefixturesmainmenu.Usingthe“UP”and“DOWN”buttonsyoucanthennavigatebetweenthedifferentoptionsinthemainmenu.Pressingthe“ENTER”buttonononeoftheseoptionsallowsyoutoaccessthesubmenuwhereyoucanusethe“LEFT”and“RIGHT”buttonstoselectoption/valuerequired.Oncetheoption/valuehasbeenselectedpressthe“ENTER”buttononcemoretoconfirmthesetting.Toexitoutofanyoftheaboveoptions,pressandholdthe“MENU”button.
TheLCDcontrolpanelcanbeusedviatheinternalbattery.Toaccessthispressandholdthe“DISPLAY BACKUP”buttonfor5secondsuntilthefixtureshomescreenisdisplayed.TheLCDdisplaywillautomaticallyshutoffafter20secondsofinactivity.
Error Codes:
Whentheunitispoweredontheunitwillautomaticallyperformamotorreset.Ifthereisaproblemwithoneormoreofthemotorsthedisplaywillflash5timesanddisplay“pan/tilt error”ontheLCDcontrolpanel.Pleasepowertheunitoffandontoresetthemotorsagain.
DISPLAY BACKUP MIC
MENU UP
LEFT ENTER RIGHT
DOWN
Evora 1000 Spot
Offset Menu:
Toaccesstheunitsoffsetmenupressthe“MENU”buttononcetodisplay“DMX Address”ontheLCDdisplay.Pressandholdthe“ENTER” buttonuntiltheoffsetmenuisdisplayed.
Offset Menu Options/Values (Default Settings in BOLD)
Description
PanOffset -128-127(000) PanOffset
TiltOffset -128-127(000) TiltOffset
ColorOffset -128-127(000) ColorOffset
Gobo1Offset -128-127(000) GoboWheel1Offset
RGobo1Offset -128-127(000) GoboWheel1RotationOffset
Gobo2Offset -128-127(000) GoboWheel2Offset
PrismOffset 000-255(000) PrismOffset
RPrismOffset -128-127(000) PrismRotationOffset
FocusOffset 000-255(000) FocusOffset
www.prolight.co.uk Evora 1000 Spot User Manual 6
Operating instructions
Main Menu Sub Menu Options/Values (Default Settings in BOLD) Description
DMXAddress 001-512 DMXAddressSetting
ChannelMode 15Chan(15channelmode) DMXChannelSetting
ShowMode
Show 1Show2Show3Show4
ShowModes
SplitColorNo (AUTO def.)Yes (PRO def.)
SplitColourSetting
SlaveModeSlave 1 (PRO & AUTO def.)Slave2
SlaveMode
BlackoutNo (AUTO def.)Yes (PRO def.)
Blackout
SoundStateOn (AUTO def.)Off (PRO def.)
SoundSetting
SoundSense 000-100(090) (PRO & AUTO def.) SoundSensitivitySetting
PanInverseNo (PRO & AUTO def.)Yes
PanInverseSetting
TiltInverseNo (PRO & AUTO def.)Yes
TiltInverseSetting
BackLightOn (AUTO def.)Off (PRO def.)
BackLightSetting
FocusAdjust 000-255(016) GoboWheel1FocusSetting
Focus2Adjust 000-255(061) GoboWheel2FocusSetting
FunctionDelay
No Delay (PRO & AUTO def.)1SDelay2SDelay3SDelay
FunctionDelaySetting
DimmerCalibr. 050-100 DimmerCalibration
AutoTest Testing AutoTest
Temp. –––C FixtureTemperature
FixtureTime –––h FixtureRunTime
FirmwareVer. V0.01J SoftwareVersion
DefaultsNoYes
PROdef.AUTOdef.
DefaultSettings
ResetNoYes
MotorReset
www.prolight.co.uk Evora 1000 Spot User Manual 7
Operating instructions
15 channel mode:
Channel Value Function
CH1 000-255 Panadjustment0-540°
CH2 000-255 Panfineadjustment
CH3 000-255 Tiltadjustment0-270°
CH4 000-255 Tiltfineadjustment
CH5 000-255 Pan/tiltspeed
CH6 000-255 Masterdimmer(0-100%)
CH7
000-007 LEDoff
008-015 LEDon
016-131 Strobe(slow-fast)
132-139 LEDon
140-181 Stroberampup(slow-fast)
182-189 LEDon
190-231 Stroberampdown(slow-fast)
232-239 LEDon
240-247 Randomstrobe(slow-fast)
248-255 LEDon
CH8(whensplitcolourisdisabledinthemenu-seepage6)
000-015 Open(white)
016-031 Red
032-047 Orange
048-063 Green
064-079 Blue
080-095 HotPink
096-111 Purple
112-127 Yellow
128-189 ColourscrollCW(fast-slow)
190-193 Colourscrollstop
194-255 ColourscrollCCW(slow-fast)
Channel Value Function
CH8(whensplitcolourisenabledinthemenu-seepage6)
000-007 Open(white)
008-016 Splitcolour(Open/Red)
017-025 Red
026-033 Splitcolour(Red/Orange)
034-042 Orange
043-050 Splitcolour(Orange/Green)
051-059 Green
060-067 Splitcolour(Green/Blue)
068-076 Blue
077-084 Splitcolour(Blue/HotPink)
085-093 HotPink
094-101 Splitcolour(HotPink/Purple)
102-110 Purple
111-118 Splitcolour(Purple/Yellow)
119-127 Yellow
128-189 ColourscrollCW(fast-slow)
190-193 Colourscrollstop
194-255 ColourscrollCCW(slow-fast)
CH9
000-007 Open
008-015 Rotatinggobo1
016-023 Rotatinggobo2
024-031 Rotatinggobo3
032-039 Rotatinggobo4
040-047 Rotatinggobo5
048-055 Rotatinggobo6
056-063 Rotatinggobo7
064-072 Gobo1shake(slow-fast)
073-081 Gobo2shake(slow-fast)
082-090 Gobo3shake(slow-fast)
091-099 Gobo4shake(slow-fast)
100-108 Gobo5shake(slow-fast)
109-117 Gobo6shake(slow-fast)
118-127 Gobo7shake(slow-fast)
128-189GobowheelscrollCW(fast-slow)
190-193 Goboscrollstop
194-255GobowheelscrollCCW(slow-fast)
www.prolight.co.uk Evora 1000 Spot User Manual 8
Operating instructions
Channel Value Function
CH10
000-127 Goborotationindex
128-189 GoborotationCW(fast-slow)
190-193 Rotationstop
194-255 GoborotationCCW(slow-fast)
CH11
000-007 Open
008-015 Staticgobo1
016-023 Staticgobo2
024-031 Staticgobo3
032-039 Staticgobo4
040-047 Staticgobo5
048-055 Staticgobo6
056-063 Staticgobo7
064-072 Gobo1shake(slow-fast)
073-081 Gobo2shake(slow-fast)
082-090 Gobo3shake(slow-fast)
091-099 Gobo4shake(slow-fast)
100-108 Gobo5shake(slow-fast)
109-117 Gobo6shake(slow-fast)
118-127 Gobo7shake(slow-fast)
128-189GobowheelscrollCW(fast-slow)
190-193 Goboscrollstop
194-255GobowheelscrollCCW(slow-fast)
CH12
000-006 Open
007-088 3facetprism
089-172 5facetprism
173-255 Frostfilter
CH13
000-127 Prismindexing
128-189 PrismrotationCCW(fast-slow)
190-193 Prismrotationstop
194-255 PrismrotationCW(slow-fast)
CH14 000-255 Focus
15 channel mode cont.:
Channel Value Function
CH15
000-069 Disableall
070-079Enableblackoutwhilstpan/tilt
080-089Disableblackoutwhilstpan/tilt
090-099Enableblackoutwhilstcolourchanging
100-109Disableblackoutwhilstcolourchanging
110-119Enableblackoutwhilstgobochanging
120-129Disableblackoutwhilstgobochanging
130-199 Nofunction
200-209 Resetmotors
210-249 Nofunction
250-255Soundactive(CH6andCH7mustbeat255)
www.prolight.co.uk Evora 1000 Spot User Manual 9
Operating instructions
Rotating gobos:
Open Gobo1 Gobo2 Gobo3
Gobo4 Gobo5 Gobo6 Gobo7
Static gobos:
Open Gobo1 Gobo2 Gobo3 Gobo4
Gobo5 Gobo6 Gobo7 Gobo8 Gobo9
www.prolight.co.uk Evora 1000 Spot User Manual 10
Setting the DMX address:
TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachfixturerequiresa“startaddress”from1-511.Afixturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannelindicatedbythestartaddress.Forexample,afixturethatoccupiesoruses7channelsofDMXandwasaddressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthechainstartsat107.
DMX 512:
DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligentfixturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothefixture.DMXdataissentasserialdatathattravelsfromfixturetofixtureviatheDATA“IN”andDATA“OUT”XLRterminalslocatedonallDMXfixtures(mostcontrollersonlyhaveadata“out”terminal).
DMX linking:
DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogetherandoperatefromasinglecontroller,aslongasallfixturesandthecontrollerareDMXcompliant.ToensureproperDMXdatatransmission,whenusingseveralDMXfixturestrytousetheshortestcablepathpossible.TheorderinwhichfixturesareconnectedinaDMXlinedoesnotinfluencetheDMXaddressing.Forexample;afixtureassignedtoaDMXaddressof1maybeplacedanywhereinaDMXline,atthebeginning,attheend,oranywhereinthemiddle.WhenafixtureisassignedaDMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,nomatterwhereitislocatedintheDMXchain.
DATA cable (DMX cable) requirements (for DMX operation):
ThisfixturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,seeimagebelow.
Note: DMX cable must be daisy chained and cannot be split.
DMX setup
FurtherDMXcablescanbepurchasedfromallgoodsoundandlightingsuppliersorProLightConceptsdealers.Pleasequote:
CABL10 – 2mCABL11 – 5mCABL12 – 10m
www.prolight.co.uk Evora 1000 Spot User Manual 11
Notice:
Besuretofollowthediagramsbelowwhenmakingyourowncables.DonotconnectthecablesshieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRsoutercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.
Special note:
Line termination:
Whenlongerrunsofcableareused,youmayneedtouseaterminatoronthelastunittoavoiderraticbehaviour.
Using a cable terminator will decrease the possibilities of erratic behaviour. (3-pin - Order ref: CABL90, 5-pin - Order ref: CABL89)
5-pin XLR DMX connectors:
Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRfixturesmaybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.
Terminationreducessignaltransmissionproblemsandinterference.ItisalwaysadvisabletoconnectaDMXterminal,(resistance120Ohm1/4W)betweenpin2(DMX-)andpin3(DMX+)ofthelastfixture.
5-pin XLR (socket)Pin 1: GND (screen)Pin 2: Signal (-)Pin 3: Signal (+)Pin 4: N/CPin 5: N/C
3-pin XLR (socket)Pin 1: GND (screen)Pin 2: Signal (-)Pin 3: Signal (+)
3-pin XLR (socket)Pin 1: GND (screen)Pin 2: Signal (-)Pin 3: Signal (+)
5-pin XLR (socket)Pin 1: GND (screen)Pin 2: Signal (-)Pin 3: Signal (+)Pin 4: N/CPin 5: N/C
DMX setup
www.prolight.co.uk Evora 1000 Spot User Manual 12
WEEE notice
Correct Disposal of this Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
Thismarkingshownontheproductoritsliterature,indicatesthatitshouldnotbedisposedwithotherhouseholdwastesattheendofitsworkinglife.Topreventpossibleharmtotheenvironmentorhumanhealthfromuncontrolledwastedisposal,pleaseseparatethisfromothertypesofwastesandrecycleitresponsiblytopromotethesustainablereuseofmaterialresources.
Householdusersshouldcontacteithertheretailerwheretheypurchasedthisproduct,ortheirlocalgovernmentoffice,fordetailsofwhereandhowtheycantakethisitemforenvironmentallysaferecycling.
Businessusersshouldcontacttheirsupplierandcheckthetermsandconditionsofthepurchasecontract.Thisproductshouldnotbemixedwithothercommercialwastesfordisposal.