Upload
vonga
View
213
Download
0
Embed Size (px)
Citation preview
www.idealcommercialheating.com
Com
mercial B
oiler Solutions
Wall Hung Condensing Boilers
Evomax
Ideal Commercial Boilers Solutions
Ideal Commercial Boilers is one of the most
respected names in the UK commercial and
domestic heating industry, operating from its
Hull manufacturing plant and offices since
1906, Ideal Commercial Boilers is one of
the few true British Manufacturers left in
the heating industry.
With over 100 years of manufacturing
experience, you can be confident to
know that our capabilities stretch beyond
traditional boiler technologies and now
include a wide range of new energy solutions
in the form of photovoltaics, solar thermal
and heat pumps; all perfectly designed to meet
your individual building requirements. Our
products are easy to specify, simple to install &
maintain and most importantly are reliable.
The Commercial Boilers Team
As industry leaders, Ideal Commercial Boilers
are committed to ensuring that all products
are engineered to the highest standards. From
dedicated one-to-one support throughout the
design, planning and after sales service stages,
you can be confident to know that we can
provide you with the Ideal Commercial Boilers
and hot water solution.
03
Contents
03
2 Introduction
4 Features & Benefits
5 Boiler Assembly
6 Performance Data & General Data
7 Optional Kits
8 Water Treatment
8-9 System Requirements
10 System Temperature Differentials,
Control Kits & Flue Systems
11-12 Flue Options
13 Flue Kit Accessories
14 Flue Resistances
15-16 Examples of calculating flue resistance
17 Flue Termination Position
18-19 Evomax Cascade Frame and Header Kits
20-31 Frame & Header Kit System
Design Options
32-33 Evomax Cascade Low Height
Frame and Header Kits
34-36 Low Height Frame & Header Kit
System Design Options
37 Case Study: Totton Health & Leisure
Training & Support
38 Ideal Commercial Training
39 Ideal Service & Support
FM 59915 OHS 593264
Ideal Commercial
Condensing
Evomax 30 -150 kW
Boiler Dim A Dim B Dim C
30, 40, 60, 80 360 130 118
100, 120 520 226 118
150 610 233 120
The following minimum clearances must be maintained for operation and servicing.
Top of boiler - dependent on flue sizeSides of boiler - 25mmBottom of boiler - 300mmFront of boiler - 450mmClearance between multiple boiler installations - 25mm
500
‘C’‘B’
‘A’
850
59 59155
81
68GasFlow Return
299
Gas
Pip
e
Flo
w/R
etur
nC
onde
nsat
e D
rain
Flu
e C
entr
e Li
ne
Flu
e C
entr
e Li
ne
2062
10-1
0155
Features and benefits
• Largest range of outputs in market (30 - 150 kW)
• Robust & light aluminium silicon alloy
heat exchanger
• Up to 110% part load efficiency
• High 5:1 turndown
• Compact – one width & height for easy siting
• Simple controls interface with large backlit display
• Comprehensive range of flue, fixing and control options
Dimensions and clearances
Evomax 30 - 150 kW
Available in outputs of 30, 40, 60, 80, 100, 120 and 150 kW,
the Evomax is designed to ensure all installation requirements
can be achieved. There is also an LPG Evomax range from
30 - 80 kW for off mains installations.
Clas
s 5
NOx
Com
pact
Disp
lay
Digi
tal
5
Prot
ectio
nFr
ost
Flue
Vari
ants
12kWCH
24kWCH
15kWCH
18kWCH
30kWCH
60kWCH
37kWCH
45kWCH
100kWCH
80kWCH
24kWDH
W 30kWDH
W
1
2
Floo
r St
andi
ngCo
mpa
ct
Diag
nost
ics
Clea
r
Wal
l Hun
gCo
mpa
ct
Stan
ding
Floo
r
Year
War
rant
y
Year
War
rant
yYe
arW
arra
nty
ABC
the
UK
Mad
e in
Clas
s 5
NOx
Com
pact
Disp
lay
Digi
tal
5
Prot
ectio
nFr
ost
Flue
Vari
ants
12kWCH
24kWCH
15kWCH
18kWCH
30kWCH
60kWCH
37kWCH
45kWCH
100kWCH
80kWCH
24kWDH
W 30kWDH
W
1
2
Floo
r St
andi
ngCo
mpa
ct
Diag
nost
ics
Clea
r
Wal
l Hun
gCo
mpa
ct
Stan
ding
Floo
r
Year
War
rant
y
Year
War
rant
yYe
arW
arra
nty
ABC
the
UK
Mad
e in
Clas
s 5
NOx
Com
pact
Disp
lay
Digi
tal
5
Prot
ectio
nFr
ost
Flue
Vari
ants
12kWCH
24kWCH
15kWCH
18kWCH
30kWCH
60kWCH
37kWCH
45kWCH
100kWCH
80kWCH
24kWDH
W 30kWDH
W
1
2
Floo
r St
andi
ngCo
mpa
ct
Diag
nost
ics
Clea
r
Wal
l Hun
gCo
mpa
ct
Stan
ding
Floo
r
Year
War
rant
y
Year
War
rant
yYe
arW
arra
nty
ABC
the
UK
Mad
e in
Clas
s 5
NOx
Com
pact
Disp
lay
Digi
tal
5
Prot
ectio
nFr
ost
Flue
Vari
ants
12kWCH
24kWCH
15kWCH
18kWCH
30kWCH
60kWCH
37kWCH
45kWCH
100kWCH
80kWCH
24kWDH
W 30kWDH
W
1
2
Floo
r St
andi
ngCo
mpa
ct
Diag
nost
ics
Clea
r
Wal
l Hun
gCo
mpa
ct
Stan
ding
Floo
r
Year
War
rant
y
Year
War
rant
yYe
arW
arra
nty
ABC
the
UK
Mad
e in
Clas
s 5
NOx
Com
pact
Disp
lay
Digi
tal
5Pr
otec
tion
Fros
t
Flue
Vari
ants
12kWCH
24kWCH
15kWCH
18kWCH
30kWCH
60kWCH
37kWCH
45kWCH
100kWCH
80kWCH
24kWDH
W 30kWDH
W
1
2Fl
oor
Stan
ding
Com
pact
Diag
nost
ics
Clea
r
Wal
l Hun
gCo
mpa
ct
Stan
ding
Floo
r
Year
War
rant
y
Year
War
rant
yYe
arW
arra
nty
ABC
the
UK
Mad
e in
For full details of all configurations & specifications, please refer to the installation manuals.
All dimensions in mm
04
• Designed for easy installation, commissioning
and servicing
• Quality product through design, component
selection and proving
• NOx <40mg/kWh (Class 5) for all natural
gas models for maximum BREEAM points
• 2 year parts and labour warranty
Ideal Commercial
308
502
309
304
306
105
302
305
208232
230231
310
301
501
Evomax 80 shown
05
Condensing
Boiler assembly - exploded view
Key
105 Auto Air Vent208 Burner Fixings230 Fan231 Gas Valve232 Venturi301 Dry Fire Thermistor302 Lead Ignition304 Ignitor Unit305 Electrode Detection306 Ignition Electrode308 Fascia Plastic309 HMI Board310 Primary PCB501 Jacket Assembly502 Door Assembly
Ideal Commercial
Model 30 30P 40 40P 60 60P 80 80P 100 120 150
Boiler Output (non-condensing) Mean 70°C (80/60)
MaxkW 30 30 40 40 60 60 80 80 100 120 150
Btu/hr 102350 102350 136500 136500 204750 204750 273000 273000 341200 409450 511800
MinkW 6 6 8 8 12 15 16 20 20 24 30
Btu/hr 20450 20450 27300 27300 40950 51200 54600 68250 68250 81900 102350
Boiler Output (condensing) Mean 40°C (50/30)
MaxkW 31.54 30.9 42.0 41.2 63.5 62.1 84.4 82.6 103.9 124.7 158.0
Btu/hr 107600 105450 143300 140600 216650 211900 288000 281850 357360 428900 539100
MinkW 6.5 6.4 8.5 8.3 12.7 15.5 17.2 21.2 21.6 26.0 32.5
Btu/hr 22200 21850 29000 28300 43350 52900 59050 72350 81620 98250 110800
Boiler Input Max Rate
NettkW 30.4 30.4 40.5 40.5 60.8 60.7 82.0 81.9 102.4 122.9 153.7
Btu/hr 103700 103700 138250 138250 207400 207400 279650 279650 349550 419500 524350
GrosskW 33.7 33 44.9 44 67.4 66 90.9 88.9 113.6 136.4 170.5
Btu/hr 115000 112600 153350 150150 230050 225200 310200 303350 387750 465300 581600
Boiler Input Min Rate
NettkW 6.1 6.1 8.1 8.1 12.2 15.2 16.4 20.5 20.5 24.6 30.7
Btu/hr 20750 20750 27650 27650 41500 51850 55950 69950 69900 83900 104900
GrosskW 6.7 6.6 9.0 8.8 13.5 16.5 18.2 22.2 22.7 27.3 34.1
Btu/hr 23000 22500 30650 30050 46000 56300 62050 75750 77550 93050 116300
Gas Rate Max Ratem3/hr 3.2 1.26 4.3 1.69 6.4 2.53 8.7 3.41 10.8 13.0 16.2
ft3/hr 113.4 44.7 151.2 59.6 226.9 89.3 305.9 120.3 382.4 458.9 573.6
Flue Gas Flow Rate
Max Ratem3/hr 47.6 46.5 63.4 62.1 95.1 93.1 128.3 125.4 160.3 192.5 240.7
ft3/hr 1680 1644 2238 2194 3360 3287 4531 4430 5662 6799 8499
CO2 (±0.5%)Max Rate % 9.7 11.4 9.7 11.4 9.7 11.4 9.7 11.4 9.7 9.7 9.7
Min Rate % 8.7 10.2 8.7 10.2 8.7 10.5 8.7 10.5 8.7 8.7 8.7
NOx Weightedmg/kWh 31.0 79 39.1 80 32.3 83.8 39.8 68 39.6 38.8 38.1
ppm 17.6 45 22.2 45 18.3 47.5 22.9 38.5 22.5 22.0 21.6
EfficiencySeasonal % 96.7 97.2 96.2 96.7 96.4 96.9 97.2 97.7 96.7 96.6 96.7
*SEDBUK 2009 % 89.6 90.6 89.3 90.3 89.4 90.5 n/a n/a n/a n/a n/a
Operating Temperature
Max ºC 82
06
Performance data
Model 30 / 30P 40 / 40P 60 / 60P 80 / 80P 100 120 150
Gas Supply 2H - G20 - 20mbar / 3P - G31 - 37mbar
Gas Supply Connection G¾
Flow Connection G1¼
Return Connection G1¼
Max Pressure (sealed system) Bar (psi) 4.0 (58)
Maximum Static Head m 40.7
Electricity Supply 230V - 50Hz
Fuse Rating A 4.0
Power Consumption W 126 207 131 265 370 403 400
IP Rating IP20
Nominal Flue Size (concentric) mm 80/1251 100/150 100/150*
Condensate Drain mm 25
Water Content l 3.0 5.0 7.0 9.2
Dry Weight Kg 49 60.30 75.70 89.75
1 optional kit available on 60/80 models for 100/150mm flue * For use with vertical flues only.
General data
Evomax 30 - 150 kW
* The value is used in the UK Government’s Standard Assessment Procedure (SAP) for energy ratings of dwellings.The test data from which it has been calculated have been certified by a notified body.
Ideal Commercial
07
Condensing
Boiler Evomax
Modulating Sequencer kit ✓
Programmable Room Thermostat kit ✓
Outside sensor kit ✓
Tank Sensor kit ✓
Room sensor kit ✓
Safety Interlock kit ✓
Fittings kit ✓
Pump kit ✓
Multi boiler frame & header kits (includes low height options) ✓
Universal sequencer kit ✓
Connection kit (includes isolation valve 1¼", non return valve, saftey valve and drain cock)
✓
Optional kits
Boiler Evomax
Remote indication (run & alarm) ✓
Hours run ✓
BMS (0-10v) operation ✓
Pump overrun ✓
Large backlit LCD controls,including 5 line plain text display
✓
Included as standard
Ideal Commercial
System requirements - open vented
Feed/expansioncistern 500mm
minimum
3000mmminimum
Systemflow topump
Inverted coldfeed entry
ColdFeed
Waterlevel
(cold)
Open vent
Systemreturn
Connectionsto boiler
ima5351
3000
min
imum
CV CV
Resillientseat control
valves
Supplypipe
DTCV = Control ValveDT = Drain Tap
Airgap
Tundish
Strainer
Type BA backflowprevention device
(RP2 valve assembly)
primary flowand return
ima7
349
The information and guidance given below is not intended to override any requirements of the above publications or the requirements of the local authority, gas or water undertakings.
The vertical distance between the pump and feed/expansion cistern MUST comply with the pump manufacturer’s minimum requirements, to avoid cavitation. Should these conditions not apply either lower the pump position or raise the cistern above the minimum requirement specified by Ideal Stelrad Group.
The isolation valves should be fitted as close to the pump as possible. The boiler is fitted with an automatic air vent, located in the left top side of the interior. This air vent must never be shut off, as this could result in dry firing of the boiler and subsequent damage to the heat exchanger.
Water Treatment
These boilers incorporate an ALUMINIUM heat exchanger.
IMPORTANT. The application of any other treatment to this product may render the guarantee of Ideal Stelrad Group INVALID.
Ideal Stelrad Group recommend Water Treatment in accordance with Guidance Notes on Water Treatment in Central Heating Systems.Ideal Stelrad Group recommend the use of Fernox Copal or MB1 or GE Betz Sentinel X100 inhibitors and associated water treatment products, which must be used in accordance with the manufacturers’ instructions.
For further information contact:Fernox Manufacturing Co. Ltd., Cookson Electronics,Forsyth Road, Sheerwater, Woking, Surrey, GU21 5RZTel: +44 (0) 1799 521133
or
Sentinel Performance Solutions, The Heath Business andTechnical Park, Runcorn, Cheshire, WA7 4QXTel: 0800 389 4670www.sentinel-solutions.net
08
Ideal Commercial
Feed/expansioncistern 500mm
minimum
3000mmminimum
Systemflow topump
Inverted coldfeed entry
ColdFeed
Waterlevel
(cold)
Open vent
Systemreturn
Connectionsto boiler
ima5351
3000
min
imum
CV CV
Resillientseat control
valves
Supplypipe
DTCV = Control ValveDT = Drain Tap
Airgap
Tundish
Strainer
Type BA backflowprevention device
(RP2 valve assembly)
primary flowand return
ima7
349
System requirements - sealed system
1. General a. The information and guidance given below is not intended to override any requirements of these publications or the requirements of the local authority, gas or water undertakings.
b. The installation should be capable of working with flow temperatures of up to 90°C and a temperature differential of up to 20°C.
c. All components of the system, including the heat exchanger of the indirect cylinder, must be suitable for a working pressure of 4 bar (60 lbf/in2) and temperature of 110°C. Care should be taken in making all connections so that the risk of leakage is minimised.
d. The boiler is fitted with an automatic air vent, located in the left top side of the interior. This air vent must never be shut off, as this could result in dry firing of the boiler and subsequent damage to the heat exchanger.
2. Safety Valve A spring loaded safety valve complying with the relevant requirements of BS. 6759 Pt. 1 must be fitted in the flow pipe as close to the boiler as possible and with no intervening valve or restriction. The valve should have the following features:
a. A non-adjustable preset lift pressure not exceeding 4 bar (60 lbf/in2).
b. A manual testing device.
c. Provision for connection of a discharge pipe. The valve or discharge pipe should be positioned so that the discharge of water or steam is visible, but will not cause hazard to user or plant.
3. Pressure Gauge A pressure gauge covering at least the range 0-4bar must be fitted to the system. The gauge should be easily seen from the filling point and should preferably be connected at the same point as the expansion vessel.
4. Expansion Vessel Expansion vessels used must comply with BS. EN 13831. Connection to the system must not incorporate an isolating valve.
Note. The method of filling, refilling, topping up or flushing sealed primary hot water circuit from the mains for a non-domestic property is shown below.
09
Condensing
Ideal Commercial
Flue systems
A comprehensive range of flue kits are available from Ideal Stelrad Group. Examples of horizontal and vertical concentric and open flue options are demonstrated on the following pages. Tables are provided with these examples, giving the maximum extensions which may be added. The flue lengths achievable without any extensions are also provided.
For horizontal flues: this is the distance from the flue outlet centre line on the boiler to the outside wall. Horizontal flues termination are not available for Evomax 150.
For vertical flue: this is the distance from the top of the boiler case to the aperture in the weather collar.
If elbows are to be used, then the equivalent length of that fitting must be subtracted from the maximum flue extensions allowed for that flue option.
Note: Horizontal terminal resistance includes 1 x 90° elbow.
When installing Evomax boilers with concentric flue (horizontally or vertically) the Ideal Commercial flue system must be used.
Together with the maximum flue resistance each boiler can work against. These may be used to calculate the total flue resistance of the system, and to determine if they are acceptable to run on the boiler.
Multiple boilers may be installed with a common flue header (not supplied by Ideal Heating).
The flue system should be designed and supplied by a specialist flue company. BS 6644 and IGE UP/10 provide guidance on design and the drainage of condensate from flue stack and headers. Condensate from a flue stack and header must be collected and drained before entering the boiler.
For Ventilation requirements please refer to the installation manual.
Controls kits
- Programmable Room Thermostat kit.Timed control of central heating. Includes a built in electronic room sensor, optimised start and on/off controlled DHW.
- Modulating Sequencer kit.Controls up to 5 boilers for cascade operation.Air and Flow Header sensors are included.
- Outside Sensor kit.Provides weather compensation directly or with Programmable Room Thermostat kit.
- Tank Sensor kit.Provides DHW temperature control. Also for use with Sequencer kit.
- Room Sensor kit.Used with Modulating Sequencer kit for CH control.
- Safety Interlock kit.Provides boiler shutdown via an external signal.
- Universal Sequencer kitBasic sequence control for up to 6 boilers in cascade operation. Air and flue header sensors are included.
10
System temperature differentials
Flow rates for common systems using either 11ºC, 15ºC or 20ºC temperature differentials are given in the table below.
Flow rate (l/min) Hydraulic resistance (mbar)
Boiler 11°C 15°C 20°C 11°C 15°C 20°C
Evomax 30 / 30P 39.1 28.7 21.5 425 225 127
Evomax 40 / 40P 52.1 38.2 28.7 875 405 225
Evomax 60 / 60P 78.2 57.3 43 435 180 83
Evomax 80 / 80P 104.2 76.4 57.3 750 420 180
Evomax 100 n/a 95.6 71.7 n/a 315 134
Evomax 120 n/a n/a 86 n/a n/a 218
Evomax 150 n/a n/a 107.5 n/a n/a 230
- 30-80 kW boilers must operate with temperature differentials from 11 to 20ºC.
- 100 kW boilers must operate with temperature differentials not less than 15 to 20ºC.
- 120-150 kW boilers must operate with temperature differentials not less than 20ºC.
Ideal Commercial
Contents
158662 / 158663• Boiler adapter + screws (x6)• Air inlet grille
158769 / 158770• Terminal
Note : See Frame 14 for elbow equivalent lengths.
RF
2501
Contents• Boiler adapter + screws (x6)• Terminal• Locking Collar• Finishing plates (x2)• Bracket
RF
2498
Note : See Frame 14 for elbow equivalent lengths.
Contents
• Boiler adapter + screws (x6)• Increaser• Terminal• Locking Collars (x2)• Finishing plates (x2)• Bracket
RF
2499
Note : See Frame 14 for elbow equivalent lengths.
Evomax vertical concentric application ~ maximum lengths and pressure differentials
Model 30/30P 40/40P 60/60P 80/80P 100 120 15042 42 7.5 12 20 17.6 7.5
140 200 117 260 220 288 290Flue Size 80 / 125 100 / 150
158654 158656
Evomax 60 & 80 vertical concentric of longer length
Model 60/60P 80/80P30 35133 250
Flue Size 100 / 150158655
Evomax open application ~ maximum lengths and pressure differentials
Model 30/30P 40/40P 60/60P 80/80P 100 120 15065 70 25 22 20 49 32
140 225 150 312 220 365 430Flue Size 80/125 100/150
158662 + 158769 158663 + 158770
Vertical roof flue kit
Evomax vertical concentric flue application ~ maximum lengths and pressure differentials
Model 30 / 30P 40 / 40P 60 / 60P 80 / 80P 100 120 150
Max flue length (m) 42 42 7.5 12 20 17.6 7.5
Max flue press diff (Pa) 140 200 117 260 220 288 290
Flue Size 80/125 100/150
Vertical flue kit No 158654 158656
Contents
• Boiler adapter + screws (x6)• Terminal• Locking Collar
• Finishing plates (x2)• Bracket
11
Condensing
Concentric flue options
RF 5755
RF 5756
Evomax 60 & 80 horizontal concentric flues of longer lengths
Model 60 / 60P 80 / 80P
Max flue length (m) 30 35
Max flue press diff (Pa) 133 250
Flue Size 100/150
Wall flue kit No 158660
Contents
• Boiler adapter + screws (x6)• Increaser• 90° elbow• Terminal• Locking collars (x2)• Wall plates (x2)
To comply with CE certification, Evomax boilers must be fitted with Ideal concentric flues (when using concentric flue type).
RF 5755
RF 5756
Horizontal wall flue kit
Evomax horizontal concentric flue application ~ maximum lengths and pressure differentials
Model 30 / 30P 40 / 40P 60 / 60P 80 / 80P 100 120
Max flue length (m) 42 42 7.5 12 20 17.6
Max flue press diff (Pa) 140 200 117 260 220 288
Flue Size 80/125 100/150
Wall flue kit No 158659 158661
Contents
• Boiler adapter + screws (x6)• 90° elbow• Terminal• Locking collars (x2)• Wall plates (x2)
Note: Please refer to page 14 for flue resistances.
Ideal Commercial
12
Contents
158662 / 158663• Boiler adapter + screws (x6)• Air inlet grille
158769 / 158770• Terminal
Note : See Frame 14 for elbow equivalent lengths.
RF
2501
Contents• Boiler adapter + screws (x6)• Terminal• Locking Collar• Finishing plates (x2)• Bracket
RF
2498
Note : See Frame 14 for elbow equivalent lengths.
Contents
• Boiler adapter + screws (x6)• Increaser• Terminal• Locking Collars (x2)• Finishing plates (x2)• Bracket
RF
2499
Note : See Frame 14 for elbow equivalent lengths.
Evomax vertical concentric application ~ maximum lengths and pressure differentials
Model 30/30P 40/40P 60/60P 80/80P 100 120 15042 42 7.5 12 20 17.6 7.5
140 200 117 260 220 288 290Flue Size 80 / 125 100 / 150
158654 158656
Evomax 60 & 80 vertical concentric of longer length
Model 60/60P 80/80P30 35133 250
Flue Size 100 / 150158655
Evomax open application ~ maximum lengths and pressure differentials
Model 30/30P 40/40P 60/60P 80/80P 100 120 15065 70 25 22 20 49 32
140 225 150 312 220 365 430Flue Size 80/125 100/150
158662 + 158769 158663 + 158770
Vertical roof flue kit
Contents
158662 / 158663• Boiler adapter + screws (x6)• Air inlet grille
158769 / 158770• Terminal
Note : See Frame 14 for elbow equivalent lengths.
RF
2501
Contents• Boiler adapter + screws (x6)• Terminal• Locking Collar• Finishing plates (x2)• Bracket
RF
2498
Note : See Frame 14 for elbow equivalent lengths.
Contents
• Boiler adapter + screws (x6)• Increaser• Terminal• Locking Collars (x2)• Finishing plates (x2)• Bracket
RF
2499
Note : See Frame 14 for elbow equivalent lengths.
Evomax vertical concentric application ~ maximum lengths and pressure differentials
Model 30/30P 40/40P 60/60P 80/80P 100 120 15042 42 7.5 12 20 17.6 7.5
140 200 117 260 220 288 290Flue Size 80 / 125 100 / 150
158654 158656
Evomax 60 & 80 vertical concentric of longer length
Model 60/60P 80/80P30 35133 250
Flue Size 100 / 150158655
Evomax open application ~ maximum lengths and pressure differentials
Model 30/30P 40/40P 60/60P 80/80P 100 120 15065 70 25 22 20 49 32
140 225 150 312 220 365 430Flue Size 80/125 100/150
158662 + 158769 158663 + 158770
Open flue kits options
Evomax 60 & 80 vertical concentric flues of longer length
Model 60 / 60P 80 / 80P
Max flue length (m) 30 35
Max flue press diff (Pa) 133 250
Flue Size 100/150
Vertical flue kit No 158655
Contents
• Boiler adapter + screws (x6)• Increaser• Terminal
• Locking Collars (x2)• Finishing plates (x2)• Bracket
Evomax open flue application ~ maximum lengths and pressure differentials
Model 30 / 30P 40 / 40P 60 / 60P 80 / 80P 100 120 150
Max flue length (m) 65 70 25 22 20 49 32
Max flue press diff (Pa) 140 225 150 312 220 365 430
Flue Size 80/125 100/150
Open flue kit No 158662 + 158769 158663 + 158770
Contents
158662 / 158663• Boiler adapter + screws (x6)*• Air inlet grille*
158769 / 158770• Terminal
158771 / 158772• Extension tube (x2)**
* The boiler / adapter & air inlet grille must be fitted to all installations.** At least 1 off extension tube MUST be used in the installation. This may be suitably cut to length if requires
To comply with CE certification, Evomax boilers must be fitted with Ideal boiler adapter and air inlet grille must be used on B23 flues.
Concentric flue options continued
Note: Please refer to page 14 for flue resistances.
Ideal Commercial
Accessory Part No.
80/125 100/150 80 100
1 90o elbow (concentric) 152616 152617 n/a n/a
2 45o elbow (concentric) 152618 152619 n/a n/a
3 90o elbow n/a n/a 158773 158774
4 45o elbow (pair) n/a n/a 158775 158776
5 Flat Weather Collar 152611 152612 158780 158780
6 Pitched Weather Collar 152609 152610 158779 158779
7 1m Extension (concentric) 152400 152401 n/a n/a
8 1m Extension (pair) n/a n/a 158771 158772
9 Increaser 80-100 n/a n/a 152404 n/a
Wall bracket 202242 202243 n/a n/a
13
Condensing
Flue kit accessories
Accessory Part No.
80/125 100/150 80 100
1. 90o elbow (concentric) 152616 152617 n/a n/a
2. 45o elbow (concentric) 152618 152619 n/a n/a
3. 90o elbow n/a n/a 158773 158774
4. 45o elbow (pair) n/a n/a 158775 158776
5. Flat Weather Collar 152611 152612 158780 158780
6. Pitched Weather Collar 152609 152610 158779 158779
7. 1m Extension (concentric) 152400 152401 n/a n/a
8. 1m Extension (pair) n/a n/a 158771 158772
9 Increaser 80-100 n/a n/a 152404 n/a
206210-5757
1 2
5
3
46
7
8
9
Ideal Commercial
14
Open Flue Systems ~ Equivalent flue resistances in metres
Models 30, 30P, 40, 40P, 60, 60P, 80, 80P Models 100 / 120 / 150
90° Elbow 2.1 2.7
45° Elbow 0.6 1.8
Maximum allowable pressure diff & flue length Concentric flues including terminal
Model Flue Size Pressure diff (Pa) Length (m)
30 / 30P 80 / 125 140 42
40 / 40P 80 / 125 200 42
60 / 60P80 / 125 117 7.5
100 / 150 133 30
80 / 80P80 / 125 260 12
100 / 150 250 35
100 100 / 150 220 20
120 100 / 150 288 17.6
150 100 / 150 291 7.5
For open flue systems with elbows fitted, use this table to correct the maximum extension capability. The table shows the equivalent length of flue tube for the elbow required.
Flue resistances - concentric flue systems
Flue resistances - open flue systems
For concentric flue systems with elbows fitted, use the table to correct the maximum flue extension capability. Alternatively use the table to design the flue system, deducting the individual resistance of components from the maximum pressure drop allowed in the flue for that boiler. The maximum pressure drop allowed in the flue is given below.
Pressure drop & resistances for concentric flue systems
Model 30 / 30P 40 / 40P 60 / 60P 80 / 80P 100 120 150
Flue gas flow rate (m3/hr) - max 47.6 63.4 95.1 128.3 160.3 192.5 240.7
Pa m Pa m Pa m Pa m Pa m Pa m Pa m
Terminals
Vertical roof kit 80 / 125 21 6 45 7 86 6.2 135 4.8
Vertical roof kit 100 / 150 30 7.6 70 8 65 3.5 100 3.3 172 4.3
Horizontal wall kit 80 / 125 + 90° 21 6 45 7 86 6.2 135 4.8
Horizontal wall kit 100 / 150 + 90° 30 7.6 70 8 65 3.5 100 3.3
Pipes & Elbows
45° bend 80 / 125 3.5 1.1 7.5 1.1 13.5 1.1 22 1.1
45° bend 100 / 150 8 1.2 15 1.2 24 1.2 35 1.2 50 1.2
90° bend 80 / 125 7.0 1.6 14.0 1.6 25 1.6 40 1.6
90° bend 100 / 150 13 2 23 2 37 2 50 2 75 2
Straight 1m length 80 / 125 3.3 1 4.8 1 15.6 1 21.7 1
Straight 1m length 100 / 150 4.4 1 7.1 1 11 1 16.4 1 38.7 1
Ideal Commercial
15
Condensing
Examples of calculating flue resistances/lengths - example 1
b8535- 012602
80/125. Therefore this installation is acceptable.
Example 2
Vertical Roof Flue for Evomax 80
Resistance (Pa) Resistance (m)
Flue Size 80/125 80/125
Vertical Flue Kit 80/125 135 4.8
2 x (28) 2 x (1)
2 x 45º elbow 2 x (22) 2 x (1.1)
Total Flue Resistance 235 9
Horizontal Flue for Evomax 40
Resistance (Pa) Resistance (m)
Flue Size 80/125 80/125
Horizontal Wall Flue Kit 80/125 45 7
2 x (6.3) 2 x (1)
1 x 90º elbow 14 1.6
Total Flue Resistance 59 10.6
b7535-012602
80/125. Therefore this installation is acceptable.
Example 1
Horizontal Flue for Evomax 40
Resistance (Pa) Resistance (m)
Flue Size 80/125 80/125
Horizontal Wall Flue Kit 80/125 45 7
2 x 1m extension flue 2 x (4.8) 2 x (1)
1 x 90º elbow 14 1.6
Total Flue Resistance 68.6 10.6
Example 1
The total maximum flue resistance for an Evomax 40 is 200Pa or 42m80/125. Therefore this installation is acceptable.
b8535- 012602
80/125. Therefore this installation is acceptable.
Example 2
Vertical Roof Flue for Evomax 80
Resistance (Pa) Resistance (m)
Flue Size 80/125 80/125
Vertical Flue Kit 80/125 135 4.8
2 x (28) 2 x (1)
2 x 45º elbow 2 x (22) 2 x (1.1)
Total Flue Resistance 235 9
Horizontal Flue for Evomax 40
Resistance (Pa) Resistance (m)
Flue Size 80/125 80/125
Horizontal Wall Flue Kit 80/125 45 7
2 x (6.3) 2 x (1)
1 x 90º elbow 14 1.6
Total Flue Resistance 59 10.6
b7535-012602
80/125. Therefore this installation is acceptable.
Example 1
Examples of calculating flue resistances/lengths - example 2
Vertical Roof Flue for Evomax 80
Resistance (Pa) Resistance (m)
Flue Size 80/125 80/125
Vertical Flue Kit 80/125 135 4.8
2 x 1m extension flue 2 x (21.7) 2 x (1)
1 x 90º elbow 2 x (22) 2 x (1.1)
Total Flue Resistance 222 9
Example 2
The total maximum flue resistance for an Evomax 80 is 260 Pa or 12m80/125. Therefore this installation is acceptable.
Ideal Commercial
16
b9535- 012602
Therefore this installation is acceptable.
Example 3
17.6m 100/150. Therefore this installation is acceptable.
Example 4
Horizontal Flue for Evomax 120
Resistance (Pa) Resistance (m)
Flue Size 100/150 100/150
Horizontal Wall Flue Kit 100/150 100 3.3
2 x (30) 2 x (1)
1 x 90º elbow 50 2
Total Flue Resistance 210 7.3
Open Flue for Evomax 30
Resistance (m)
Flue Size 80
5 x 1m extension 5 x 1
2 x 45º elbow 2 x 0.6
Total Flue Resistance 6.2
b7535-012602
Examples of calculating flue resistances/lengths - example 4
b9535- 012602
Therefore this installation is acceptable.
Example 3
17.6m 100/150. Therefore this installation is acceptable.
Example 4
Horizontal Flue for Evomax 120
Resistance (Pa) Resistance (m)
Flue Size 100/150 100/150
Horizontal Wall Flue Kit 100/150 100 3.3
2 x (30) 2 x (1)
1 x 90º elbow 50 2
Total Flue Resistance 210 7.3
Open Flue for Evomax 30
Resistance (m)
Flue Size 80
5 x 1m extension 5 x 1
2 x 45º elbow 2 x 0.6
Total Flue Resistance 6.2
b7535-012602
Examples of calculating flue resistance/lengths - example 3
Open Flue for Evomax 30
Resistance (m)
Flue Size 80
5 x 1m extension 5 x 1
2 x 45º elbow 2 x 0.6
Total Flue Resistance 6.2
Example 3
The maximum flue extension for an Evomax 30 on open flue is 65m. Therefore this installation is acceptable.
Horizontal Flue for Evomax 120
Resistance (Pa) Resistance (m)
Flue Size 100/150 100/150
Horizontal Wall Flue Kit 100/150 100 3.3
2 x 1m extension flue 2 x (16.4) 2 x (1)
1 x 90º elbow 50 2
Total Flue Resistance 183 7.3
Example 4
The total maximum flue resistance for an Evomax 120 is 288 Pa or17.6m 100/150. Therefore this installation is acceptable.
Ideal Commercial
ima5355
boundary
boundary
JH
L
F
I
G
I
A
B
C
D, E
F
F
K
M
N
RF9807
A A
B
AA = 600mmB = 2000mm
The flue terminal shall notpenetrate the shaded areaof the roof
Aluminiumshield
1000mmmin
1000mmmin
635mmfixed
560mmfixed
1000mm
min
Flue termination position
Due to the high efficiency of these boilers pluming will occur. For this reason vertical termination is recommended, and in any case, terminal positions which could cause problems should where possible be avoided.
Particular care should be taken in the case of large multiple boiler installations, and complying with the requirements of the Clean Air Act.
The information below is extracted from BS. 5440 Pt. 1 and is for boilers with heat inputs not exceeding 70kW nett, and the latest Building Regulation Part J. Detailed reference should still be made to these standards. In IE refer to I.S. 813:2002.
Concentric Wall Terminal Positions Minimum spacing
A. Below an opening (1) 300 mm
B. Above an opening (1) 300 mm
C. Horizontally to an opening (1) 300 mm
D. Below gutters, soil pipes or drain pipes 75 mm
E. Below eves 200 mm
F. Below balcony or car port roof 200 mm
G. From a vertical drain pipe or soil pipe 200 mm
H. From an internal or external corner or to a boundary alongside the terminal 300 mm
I. Above ground, roof or balcony level 300 mm
J. From a surface or a boundary facing the terminal 600 mm
K. From a terminal facing the terminal 1200 mm
L. From an opening in the car port into the building 1200 mm
M. Vertically from a terminal on the same wall 1500 mm
N. Horizontally from a terminal on the same wall 300 mm
Concentric Roof Terminal Positions
Directly below an opening, air brick, windows, etc. 300 mm
Below plastic/painted gutters 500 mm*
Below painted surface 500 mm*
Below eaves or balcony 500 mm
From wall 1000 mm
Below Velux window 2000 mm
Above or side of Velux window 200 mm
* May be reduced to 300mm if a shield fitted.
(1) An opening here means an openable element, such as a openable window, or a fixed opening such as an air vent. However, in addition, the outlet should not be nearer than 150mm (fanned draught) to an opening into the building fabric formed for the purpose of accommodating a built in element, such as a window frame.
If the terminal is fitted less than 500 mm below plastic gutters, painted eaves or any other painted surface then an aluminium shield at least 1m long should be fitted to protect the surface.For positioning of open flue terminals reference should be made to BS. 5440 Pt. 1. In IE refer to I.S.813.2002.
17
Condensing
HEAT INPUTS IN EXCESSOF 70kW NETT For boiler installations with total heat inputs in excess of 70kW nett, reference should be made to BS6644. In IE refer to I.S.820.2000.
Ideal Commercial
Boiler Frame and Header Kits
The Frame and Header Kits are suitable for modular (cascade) boiler
installations, and are available up to a maximum output of 600 kW, in
both in-line and back-to-back arrangements.
In-line kits
Kits include flow & return headers with mixing header and gas header,
all with fixing brackets. For easy connection flexible
stainless steel pipe and connections are supplied together with
pressure relief values, boiler shut off valves and drain cock.
Appropriately sized ErP modulating shunt pumps are also included.
Flow, return and low loss headers together with the flexible boiler
connections are all pre insulated. Separate single boiler frame kits
are available for use with in-line kits if required.
Back-to-back kits
Kits include all the in-line contents plus the required special frame kits for such compact installations.
Both types of kit are available for the following number of boilers and sizes. Mixing header kits and
modulating pump kits are also available separately.
In-line kits do not include the support frame as the boilers can be wall mounted, but a frame kit is available if
the wall is unsuitable to facilitate boiler mounting.
Frame and Header Kits
Evomax Cascade
Please note, models 120 kW and 150 kW currently do not incorporate the modulating pump.For full details of all configurations & specifications, please refer to the installation manual.
Available options
Models Size
2 boilers 30-100 DN80
2 boilers 120-150 DN80
3 boilers 30-100 DN80
3 boilers (back to back) 30-100 DN100
3 boilers 120-150 DN100
4 boilers 30-100 DN100
4 boilers 120-150 DN100
5 boilers 30-100 DN100
5 boilers 120 DN100
6 boilers 30-100 DN100
18
Clas
s 5
NOx
Com
pact
Disp
lay
Digi
tal
5
Prot
ectio
nFr
ost
Flue
Vari
ants
12kWCH
24kWCH
15kWCH
18kWCH
30kWCH
60kWCH
37kWCH
45kWCH
100kWCH
80kWCH
24kWDH
W 30kWDH
W
1
2
Floo
r St
andi
ngCo
mpa
ct
Diag
nost
ics
Clea
r
Wal
l Hun
gCo
mpa
ct
Stan
ding
Floo
r
Year
War
rant
y
Year
War
rant
yYe
arW
arra
nty
ABC
the
UK
Mad
e in
Clas
s 5
NOx
Com
pact
Disp
lay
Digi
tal
5
Prot
ectio
nFr
ost
Flue
Vari
ants
12kWCH
24kWCH
15kWCH
18kWCH
30kWCH
60kWCH
37kWCH
45kWCH
100kWCH
80kWCH
24kWDH
W 30kWDH
W
1
2
Floo
r St
andi
ngCo
mpa
ct
Diag
nost
ics
Clea
r
Wal
l Hun
gCo
mpa
ct
Stan
ding
Floo
r
Year
War
rant
y
Year
War
rant
yYe
arW
arra
nty
ABC
the
UK
Mad
e in
Clas
s 5
NOx
Com
pact
Disp
lay
Digi
tal
5
Prot
ectio
nFr
ost
Flue
Vari
ants
12kWCH
24kWCH
15kWCH
18kWCH
30kWCH
60kWCH
37kWCH
45kWCH
100kWCH
80kWCH
24kWDH
W 30kWDH
W
1
2
Floo
r St
andi
ngCo
mpa
ct
Diag
nost
ics
Clea
r
Wal
l Hun
gCo
mpa
ct
Stan
ding
Floo
r
Year
War
rant
y
Year
War
rant
yYe
arW
arra
nty
ABC
the
UK
Mad
e in
Clas
s 5
NOx
Com
pact
Disp
lay
Digi
tal
5
Prot
ectio
nFr
ost
Flue
Vari
ants
12kWCH
24kWCH
15kWCH
18kWCH
30kWCH
60kWCH
37kWCH
45kWCH
100kWCH
80kWCH
24kWDH
W 30kWDH
W
1
2
Floo
r St
andi
ngCo
mpa
ct
Diag
nost
ics
Clea
r
Wal
l Hun
gCo
mpa
ct
Stan
ding
Floo
r
Year
War
rant
y
Year
War
rant
yYe
arW
arra
nty
ABC
the
UK
Mad
e in
Clas
s 5
NOx
Com
pact
Disp
lay
Digi
tal
5Pr
otec
tion
Fros
t
Flue
Vari
ants
12kWCH
24kWCH
15kWCH
18kWCH
30kWCH
60kWCH
37kWCH
45kWCH
100kWCH
80kWCH
24kWDH
W 30kWDH
W
1
2Fl
oor
Stan
ding
Com
pact
Diag
nost
ics
Clea
r
Wal
l Hun
gCo
mpa
ct
Stan
ding
Floo
r
Year
War
rant
y
Year
War
rant
yYe
arW
arra
nty
ABC
the
UK
Mad
e in
Ideal Commercial
In-line Frame & Header Kits 3 x Evomax 30 - 150 kW
300
650
552 8
50
440
530
DIM C
194
5
207 200
380
550 CRS TYP
50
500
143
500 500
50
DIM
A
DIM
B
25 1650
25
2030
Header Kits Rating DIM A (mm)
DIM B (mm)
DIM C (mm)
D(DN Flange)
Concentric Flue
UIN206875 30-80kW 128 360 413 DN80 80/125100kW 224 520 573 DN80 100/150
UIN206872 120kW 224 520 573 DN100 100/150150kW 232 610 663 DN100 100/150
2" BSP female
(D)
suit needs of each particular system.
located either on the LHS or RHS of the assembly to
Note 2: Optional frame (UIN206970) one req'd per boiler
Betweenboilers
Betweenboilers
(D) System flowflange connection
System returnflange connection
Inline frame & header Kits 120/150kW UIN206872ALL DIMENSIONS ARE IN mm
gas connection
optional frameswith 3 x Evomax 120 - 150kW boilers mounted onto
Note 1: Mixing header and gas connections can be
Inline frame & header Kits 30-100kW UIN206875with 3 x Evomax 30 - 100kW boilers mounted ontooptional frames
300
650
552
850
440
530
DIM C
194
5
207 200
380
550 CRS TYP
50
500
143
500 500
50 D
IM A
DIM
B
25 1650
25
2030
Header Kits Rating DIM A (mm)
DIM B (mm)
DIM C (mm)
D(DN Flange)
Concentric Flue
UIN206875 30-80kW 128 360 413 DN80 80/125100kW 224 520 573 DN80 100/150
UIN206872 120kW 224 520 573 DN100 100/150150kW 232 610 663 DN100 100/150
2" BSP female
(D)
suit needs of each particular system.
located either on the LHS or RHS of the assembly to
Note 2: Optional frame (UIN206970) one req'd per boiler
Betweenboilers
Betweenboilers
(D) System flowflange connection
System returnflange connection
Inline frame & header Kits 120/150kW UIN206872ALL DIMENSIONS ARE IN mm
gas connection
optional frameswith 3 x Evomax 120 - 150kW boilers mounted onto
Note 1: Mixing header and gas connections can be
Inline frame & header Kits 30-100kW UIN206875with 3 x Evomax 30 - 100kW boilers mounted ontooptional frames
If not wall mounting the boiler, a frame is required per appliance.
Mixing header and gas connections can be located either on the LHS
or RHS of the assembly to suit needs of each particular system.
Output
DIM A
DIM B
DIM C
D (DN flange)
Concentric flue
30-80 kW 128 360 413 DN80 80/125
100 kW 224 520 573 DN80 100/150
120 kW 224 520 573 DN100 100/150
150 kW 232 610 663 DN100 100/150
19
Frame and H
eader Kits
Ideal Commercial
20
Frame and Header Kit System Design Options
Total OutputRequired kW
No. of Boilers
Side By Side Option –Boiler Models
Side by SideFootprint SizeW x D (mm)
Header KitProduct No.Side By Side
Boiler ModelsBack to BackFootprint SizeW x D (mm)
Frame/HeaderProduct No.
Back To Back
60 2 30 1480 x 573 206871 30 930x1096 206922
70 2 30 + 40 1480 x 573 206871 30 + 40 930x1096 206922
80 2 40 1480 x 573 206871 40 930x1096 206922
90 2 30 + 60 1480 x 573 206871 30 + 60 930x1096 206922
100 2 40 + 60 1480 x 573 206871 40 + 60 930x1096 206922
110 2 30 + 80 1480 x 573 206871 30 + 80 930x1096 206922
120 2 60 1480 x 573 206871 60 930x1096 206922
130 3 30, 40 + 60 2030 x 573 206875 30, 40 + 60 480x1096 206926
140 2 60 + 80 1480 x 573 206871 60 + 80 930x1096 206922
150 3 30, 40 + 80 2030 x 573 206875 30, 40 + 80 480x1096 206926
160 2 80 1480 x 573 206871 80 930x1096 206922
170 3 30, 60 + 80 2030 x 573 206875 30, 60 + 80 480x1096 206926
180 2 80 + 100 1480 x 573 206871 80 + 100 930x1096 206922
190 3 30, 60 + 100 2030 x 573 206875 30, 60 + 100 480x1096 206926
200 2 100 1480 x 573 206871 100 930x1096 206922
210 4 30, 40, 60 + 80 2580 x 573 206879 30, 40, 60 + 80 1480x1096 206930
220 3 2 x 60 + 100 2030 x 573 206875 2 x 60 + 100 1480x1096 206926
230 4 30, 40, 60 + 100 2580 x 573 206879 30, 40, 60 + 100 1480x1096 206930
240 2 120 1480 x 573 206868 120 930x1276 206619
250 4 30, 60, 2 x 80 2580 x 573 206879 30, 60, 2 x 80 1480x1096 206930
260 3 60, 2 x 100 2030 x 573 206875 60, 2 x 100 1480x1096 206926
270 2 120 + 150 1480 x 663 206868 120 + 150 930x1276 206919
280 3 80, 2 x 100 2030 x 573 206875 80, 2 x 100 1480x1096 206926
290 4 30, 60, 2 x 100 2580 x 573 206879 30, 60, 2 x 100 1480x1096 206930
300 2 150 1480 x 663 206868 150 930x1276 206919
310 4 30, 80, 2 x 100 2580 x 573 206879 30, 80, 2 x 100 1480x1096 206930
320 4 40, 80, 2 x 100 2580 x 573 206879 40, 80, 2 x 100 1480x1096 206930
330 4 30, 3 x 100 2580 x 573 206879 30, 3 x 100 1480x1096 206930
340 4 60, 80, 2 x 100 2580 x 573 206879 60, 80, 2 x 100 1480x1096 206930
350 5 30, 40, 80, 2 x 100 3130 x 573 206882 30, 40, 80, 2 x 100 2030x1096 206933
Ideal Commercial
21
Condensing
Total OutputRequired kW
No. of Boilers
Side By Side Option –Boiler Models
Side by SideFootprint SizeW x D (mm)
Header KitProduct No.Side By Side
Boiler ModelsBack to BackFootprint SizeW x D (mm)
Frame/HeaderProduct No.
Back To Back
360 3 120 2030 x 663 206872 120 1480x1276 206923
370 5 30, 40, 3 x 100 3130 x 573 206882 30, 40, 3 x 100 2030x1096 206933
380 4 80, 3 x 100 2030 x 573 206875 80, 2 x 100 1480x1096 206926
390 3 2 x 120 + 150 2030 x 663 206872 2 x 120 + 150 1480x1276 206923
400 4 100 2580 x 573 206879 100 1480x1096 206930
410 5 30, 80, 3 x 100 3130 x 573 206882 30, 80, 3 x 100 2030x1096 206933
420 3 120, 2 x 150 2030 x 663 206872 120, 2 x 150 1480x1276 206923
430 5 30, 4 x 100 2580 x 573 206879 30, 4 x 100 1480x1096 206930
440 5 40, 4 x 100 2580 x 573 206879 40, 4 x 100 1480x1096 206930
450 3 150 2030 x 663 206872 150 1480x1276 206923
460 5 60, 4 x 100 3130 x 573 206882 60, 4 x 100 2030x1096 206933
470 6 30, 40, 3 x 100 3680 x 573 206884 30, 40, 3 x 100 2030x1096 206935
480 4 120 2580 x 663 206876 120 480x1276 206927
490 6 30, 60, 4 x 100 3680 x 573 206884 30, 60, 4 x 100 2030x1096 206935
500 5 100 3130 x 573 206882 100 2030x1096 206933
510 4 3 x 120 + 150 2580 x 663 206876 3 x 120 + 150 1480x1276 206927
520 6 40, 80, 4 x 100 3680 x 573 206884 40, 80, 4 x 100 2030x1096 206935
530 6 30, 5 x 100 3680 x 573 206884 30, 5 x 100 2030x1096 206935
540 4 2 x 120, 2 x 150 2580 x 663 206876 2 x 120, 2 x 150 1480x1276 206927
550 N/A N/A N/A N/A N/A N/A
560 6 60, 5 x 100 3680 x 573 206884 60, 5 x 100 2030x1096 206935
570 4 120, 3 x 150 2580 x 663 206876 120, 3 x 150 1480x1276 206927
580 6 80, 5 x 100 3680 x 573 206884 80, 5 x 100 2030x1096 206935
590 N/A N/A N/A N/A N/A N/A
600 4 150 2580 x 663 206876 150 1480x1276 206927
Boiler Evomax
In line frame kit ✓
Mixing header kit DN80 ✓
Mixing header kit DN100 ✓
Pump kit (30-100kW) ✓
Pump kit (120-150kW) ✓
Optional kits
Ideal Commercial
22
In-line Frame & Header Kits2 x Evomax 30 - 150kW
440
300
650
DIM
C
207
530
1945
380
552
200
850
110
0 2
5
148
0 25
DIM A
550
CRS
500
143
500
DIM B
50
FL
AN
GE
CO
NN
(D)
SY
STE
M R
ETU
RN
Inlin
e fra
me
& h
eade
r Kits
30-1
00kW
U
IN20
6871
optio
nal f
ram
esw
ith
b
oile
rs m
ount
ed o
nto
FL
AN
GE
CO
NN
(D)
SY
STE
M F
LOW
Head
er K
its
Rat
ing
DIM
A
(mm
)D
IM B
(m
m)
DIM
C
(mm
)D
(DN
Fla
nge)
C
once
ntric
Fl
ue
UIN
2068
7130
-80k
W12
836
041
3D
N80
80/1
2510
0kW
224
520
573
DN
8010
0/15
0
UIN
2068
6812
0kW
224
520
573
DN
8010
0/15
015
0kW
232
610
663
DN
8010
0/15
0
2" B
SP
Fem
ale
Inlin
e fra
me
& h
eade
r Kits
120/
150k
W U
IN20
6868
with
b
oile
rs m
ount
ed o
nto
optio
nal f
ram
es
BO
ILE
RS
BE
TWE
EN
ALL
DIM
EN
SIO
NS
AR
E IN
mm
Gas
Con
nect
ion
Not
e 1:
Mix
ing
head
er a
nd g
as c
onne
ctio
ns c
an b
elo
cate
d ei
ther
on
the
LHS
or R
HS
of t
he a
ssem
bly
tosu
it ne
eds
of e
ach
parti
cula
r sys
tem
.
Not
e 2:
Opt
iona
l fra
me
(UIN
2069
70) o
ne re
q'd
per b
oile
r
2 x
Evom
ax 3
0 - 1
50kW
2 x
Evom
ax 1
20 -
150k
W
Ideal Commercial
23
Condensing
Back to Back Frame & Header Kits2 x Evomax 30 - 150kW
300
650
415
182
boi
lers
mou
nted
bk
to b
kA
LL D
IME
NS
ION
S A
RE
IN m
mFr
ame
& h
eade
r Kits
30-
100k
W U
IN20
6922
with
bo
ilers
mou
nted
bk
to b
kFr
ame
& h
eade
r Kits
120
/150
kW U
IN20
6919
with
Not
e: M
ixin
g he
ader
and
gas
con
nect
ions
can
be
suit
need
s of
eac
h pa
rticu
lar s
yste
m.
loca
ted
eith
er o
n th
e LH
S o
r RH
S o
f the
ass
embl
y to
FLA
NG
E C
ON
N(D
) SY
STE
M F
LOW
FLA
NG
E C
ON
N(D
) SY
STE
M R
ETU
RN
He
ad
er K
its
Ra
ting
DIM
A
(mm
)D
IM B
(m
m)
DIM
C
(mm
)D
(DN
Fla
ng
e)
Co
nc
en
tric
Fl
ue
UIN
2069
2230
-80k
W12
831
277
6D
N80
80/1
2510
0kW
224
504
1096
DN
8010
0/15
0
UIN
2069
1912
0kW
224
504
1096
DN
8010
0/15
015
0kW
232
520
1276
DN
8010
0/15
0
550
2
5
930
25
DIM B
DIM A DIM A
264
CR
S
500
2" B
SP
Fem
ale
Gas
Con
nect
ion
200
380
950
1945
530
DIM
C
850
2 x
Evom
ax 3
0 - 1
00kW
2 x
Evom
ax 1
20 -
150k
W
Ideal Commercial
24
In-line Frame & Header Kits3 x Evomax 30 - 150kW
300
650
552
850
440
530
DIM
C
1945
207
200
380
550
CR
S TY
P
50
500
143
500
5
00
50
DIM A
DIM B
25
165
0 2
5
203
0
He
ad
er K
its
Ra
ting
DIM
A
(mm
)D
IM B
(m
m)
DIM
C
(mm
)D
(DN
Fla
ng
e)
Co
nc
en
tric
Fl
ue
UIN
2068
7530
-80k
W12
836
041
3D
N80
80/1
2510
0kW
224
520
573
DN
8010
0/15
0
UIN
2068
7212
0kW
224
520
573
DN
100
100/
150
150k
W23
261
066
3D
N10
010
0/15
0
2" B
SP
Fem
ale
FLA
NG
E C
ON
NE
CTI
ON
(D) S
YS
TEM
RE
TUR
N
suit
need
s of
eac
h pa
rticu
lar s
yste
m.
FLA
NG
E C
ON
NE
CTI
ON
loca
ted
eith
er o
n th
e LH
S o
r RH
S o
f the
ass
embl
y to
Not
e 2:
Opt
iona
l fra
me
(UIN
2069
70) o
ne re
q'd
per b
oile
r
BE
TWE
EN
BE
TWE
EN
BO
ILE
RS
(D) S
YS
TEM
FLO
W
Inlin
e fra
me
& h
eade
r Kits
120
/150
kW U
IN20
6872
BO
ILE
RS
ALL
DIM
EN
SIO
NS
AR
E IN
mm
Gas
Con
nect
ion
optio
nal f
ram
esw
ith 3
x E
vom
ax 1
20 -
150k
W b
oile
rs m
ount
ed o
nto
Not
e 1:
Mix
ing
head
er a
nd g
as c
onne
ctio
ns c
an b
e
Inlin
e fra
me
& h
eade
r Kits
30-
100k
W U
IN20
6875
with
3 x
Evo
max
30
- 100
kW b
oile
rs m
ount
ed o
nto
optio
nal f
ram
es
Ideal Commercial
25
Condensing
Back to Back Frame & Header Kits3 x Evomax 30 - 150kW
300 650
182
415
DIM
A
(mm
)D
IM B
(m
m)
DIM
C
(mm
)D
(DN
Fla
ng
e)
Co
nc
en
tric
Fl
ue
UIN
2069
2630
-80k
W12
831
277
6D
N80
80/1
2510
0kW
224
504
1096
DN
8010
0/15
0
UIN
2069
2312
0kW
224
504
1096
DN
100
100/
150
150k
W23
252
012
76D
N10
010
0/15
0
Fram
e &
hea
der K
it 30
-100
kW U
IN20
6926
with
FLA
NG
E C
ON
N(D
) SY
STE
M F
LOW
ALL
DIM
EN
SIO
NS
AR
E IN
mm
boile
rs m
ount
ed b
k to
bk
BE
TWE
EN
BO
ILE
RS
parti
cula
r sys
tem
.of
the
asse
mbl
y to
sui
t nee
ds o
f eac
h
FLA
NG
E C
ON
N(D
) SY
STE
M R
ETU
RN
Not
e: M
ixin
g he
ader
and
gas
con
nect
ions
ca
n be
loca
ted
eith
er o
n th
e LH
S o
r RH
S
Fram
e &
hea
der K
it 12
0/15
0kW
UIN
2069
23 w
ith
boile
rs m
ount
ed b
k to
bk
110
0 2
5 2
5
148
0
2" B
SP
Fem
ale
Gas
Con
nect
ion
200
1945
530
950
380
850
DIM
C
500
5
00
50
DIM A
DIM B
550
CR
S
264
CR
S
DIM A
He
ad
er K
its
Ra
ting
3 x
Evom
ax 3
0 - 1
00kW
3 x
Evom
ax 1
20 -
150k
W
Ideal Commercial
26
In-line Frame & Header Kits4 x Evomax 30 - 150kW
300
650
He
ad
er K
its
Ra
ting
DIM
A
(mm
)D
IM B
(m
m)
DIM
C
(mm
)D
(DN
Fla
ng
e)
Co
nc
en
tric
Fl
ue
UIN
2068
7930
-80k
W12
836
041
3D
N10
080
/125
100k
W22
452
057
3D
N10
010
0/15
0
UIN
2068
7612
0kW
224
520
573
DN
100
100/
150
150k
W23
261
066
3D
N10
010
0/15
0
loca
ted
eith
er o
n th
e LH
S o
r RH
S o
f the
ass
embl
y to
Not
e 2:
Opt
iona
l fra
me
(UIN
2069
70) o
ne re
q'd
per b
oile
r
2" B
SP
Fem
ale
ALL
DIM
EN
SIO
NS
AR
E IN
mm
suit
need
s of
eac
h pa
rticu
lar s
yste
m.
Gas
Con
nect
ion
optio
nal f
ram
es b
oile
rs m
ount
ed o
nto
FLA
NG
E C
ON
N(D
) SY
STE
M R
ETU
RN
FLA
NG
E C
ON
N(D
) SY
STE
M F
LOW
BO
ILE
RS
BE
TWE
EN
BO
ILE
RS
BE
TWE
EN
BO
ILE
RS
BE
TWE
EN
Inlin
e fra
me
& h
eade
r Kits
120
/150
kW U
IN20
6876
Not
e 1:
Mix
ing
head
er a
nd g
as c
onne
ctio
ns c
an b
e
Inlin
e fra
me
& h
eade
r Kits
30-
100k
W U
IN20
6879
boile
rs m
ount
ed o
nto
optio
nal f
ram
es
50
550
CR
S TY
P 1
43
DIM A
500
5
00
500
5
00
DIM B
50
50
220
0 2
5 2
5
258
0
380
1945
207
DIM
C
850 530
200
552
452
with
4 x
Evo
max
30
- 100
kWw
ith 4
x E
vom
ax 1
20 -
150k
W
Ideal Commercial
27
Condensing
Back to Back Frame & Header Kits4 x Evomax 30 - 150kW
182
427
300 650
500
5
00
50
DIM A
DIM B
550
CR
S
264
CR
S
DIM A
Head
er K
its
Rat
ing
DIM
A
(mm
)D
IM B
(m
m)
DIM
C
(mm
)D
(DN
Fla
nge)
C
once
ntric
Fl
ue
UIN
2069
3030
-80k
W12
831
277
6D
N10
080
/125
100k
W22
450
410
96D
N10
010
0/15
0
UIN
2069
2712
0kW
224
504
1096
DN
100
100/
150
150k
W23
252
012
76D
N10
010
0/15
0
Fram
e &
hea
der K
its 1
20/1
50kW
UIN
2069
27 w
ith
BO
ILE
RS
ALL
DIM
EN
SIO
NS
AR
E IN
mm
BE
TWE
EN
(D) S
YS
TEM
RE
TUR
N
FL
AN
GE
CO
NN
parti
cula
r sys
tem
.of
the
asse
mbl
y to
sui
t nee
ds o
f eac
h
FLA
NG
E C
ON
N(D
) SY
STE
M F
LOW
Not
e: M
ixin
g he
ader
and
gas
con
nect
ions
ca
n be
loca
ted
eith
er o
n th
e LH
S o
r RH
S
Fram
e &
hea
der K
its 3
0-10
0kW
UIN
2069
30 w
ith
boile
rs m
ount
ed b
k to
bk
2" B
SP
Fem
ale
Gas
Con
nect
ion
200
850 530
950
380
1945
DIM
C
110
0 2
5 2
5
148
0
4 x
Evom
ax 3
0 - 1
00kW
boile
rs m
ount
ed b
k to
bk
4 x
Evom
ax 1
20 -
150k
W
Ideal Commercial
28
In-line Frame & Header Kits5 x Evomax 30 - 120kW
300 650
He
ad
er K
its
Ra
ting
DIM
A
(mm
)D
IM B
(m
m)
DIM
C
(mm
)D
(DN
Fla
ng
e)
Co
nc
en
tric
Fl
ue
UIN
2068
8230
-80k
W12
836
041
3D
N10
080
/125
100k
W22
452
057
3D
N10
010
0/15
0
UIN
2068
8012
0kW
224
520
573
DN
100
100/
150
loca
ted
eith
er o
n th
e LH
S o
r RH
S o
f the
ass
embl
y to
BO
ILE
RS
suit
need
s of
eac
h pa
rticu
lar s
yste
m.
ALL
DIM
EN
SIO
NS
AR
E IN
mm
BE
TWE
EN
Gas
Con
nect
ion
optio
nal f
ram
e
FLA
NG
E C
ON
N(D
) SY
STE
M R
ETU
RN
FLA
NG
E C
ON
N(D
) SY
STE
M F
LOW
BO
ILE
RS
BE
TWE
EN
BO
ILE
RS
BE
TWE
EN
BO
ILE
RS
BE
TWE
EN
Inlin
e fra
me
& h
eade
r Kits
120
kW U
IN20
6880
2" B
SP
Fem
ale
Not
e 2:
Opt
iona
l fra
me
(UIN
2069
70) o
ne re
q'd
per b
oile
r
Not
e 1:
Mix
ing
head
er a
nd g
as c
onne
ctio
ns c
an b
e
Inlin
e fra
me
& h
eade
r Kits
30-
100k
W U
IN20
6882
boile
rs m
ount
ed o
nto
optio
nal f
ram
e
850
1945
380
452
530
200
552
207
DIM
C
50
550
CR
S T
YP
1
43
DIM A
500
5
00
500
5
00
500
DIM B
50
50
50
275
0
25
25
313
0
with
5 x
Evo
max
30
- 100
kWbo
ilers
mou
nted
ont
ow
ith 5
x E
vom
ax 1
20kW
Ideal Commercial
29
Condensing
Back to Back Frame & Header Kits5 x Evomax 30 - 120kW
300 650
182
427
Head
er K
its
Rat
ing
DIM
A
(mm
)D
IM B
(m
m)
DIM
C
(mm
)D
(DN
Fla
nge)
C
once
ntric
Fl
ue
UIN
2069
3330
-80k
W12
831
277
6D
N10
080
/125
100k
W22
450
410
96D
N10
010
0/15
0
UIN
2069
3112
0kW
224
504
1096
DN
100
100/
150 Fram
e &
hea
der K
its 3
0-10
0kW
UIN
2069
33 w
ith
boile
rs m
ount
ed b
k to
bk
BO
ILE
RS
ALL
DIM
EN
SIO
NS
AR
E IN
mm
BE
TWE
EN
(D) S
YS
TEM
RE
TUR
N
FL
AN
GE
CO
NN
parti
cula
r sys
tem
.of
the
asse
mbl
y to
sui
t nee
ds o
f eac
h
FLA
NG
E C
ON
N(D
) SY
STE
M F
LOW
Not
e: M
ixin
g he
ader
and
gas
con
nect
ions
ca
n be
loca
ted
eith
er o
n th
e LH
S o
r RH
S
Fram
e &
hea
der K
its 1
20kW
UIN
2069
31 w
ith
boile
rs m
ount
ed b
k to
bk
165
0 2
5 2
5
203
0
BE
TWE
EN
BO
ILE
RS
500
5
00
50
DIM A
DIM B
550
CR
S
500
264
CR
S
50
DIM A
2" B
SP
Fem
ale
Gas
Con
nect
ion
200 850
530
950
380
1945
DIM
C
5 x
Evom
ax 3
0 - 1
00kW
5 x
Evom
ax 1
20kW
Ideal Commercial
30
In-line Frame & Header Kits6 x Evomax 30 - 100kW
300 650
2" B
SP
Fem
ale
Gas
Con
nect
ion 1945
380
530
200
552
207
850
452 D
IM C
He
ad
er K
its
Ra
ting
DIM
A
(mm
)D
IM B
(m
m)
DIM
C
(mm
)D
(DN
Fla
ng
e)
Co
nc
en
tric
Fl
ue
UIN
2068
8430
-80k
W12
836
041
3D
N10
080
/125
100k
W22
452
057
3D
N10
010
0/15
0
BE
TWE
EN
ALL
DIM
EN
SIO
NS
AR
E IN
mm
BO
ILE
RS
BO
ILE
RS
optio
nal f
ram
esw
ith 6
x E
vom
ax 3
0 -1
00kW
boi
lers
mou
nted
ont
o
FLA
NG
E C
ON
N(D
) SY
STE
M R
ETU
RN
BE
TWE
EN
Inlin
e fra
me
& h
eade
r Kits
30-
100k
W U
IN20
6884
BO
ILE
RS
BE
TWE
EN
BO
ILE
RS
BE
TWE
EN
(D) S
YS
TEM
FLO
W
FL
AN
GE
CO
NN
BO
ILE
RS
BE
TWE
EN
Not
e 1:
Mix
ing
head
er a
nd g
as c
onne
ctio
ns c
an b
elo
cate
d ei
ther
on
the
LHS
or R
HS
of t
he a
ssem
bly
tosu
it ne
eds
of e
ach
parti
cula
r sys
tem
.
Not
e 2:
Opt
iona
l fra
me
(UIN
2069
70) o
ne re
q'd
per b
oile
r
330
0
25
25
368
0
DIM A
550
CR
S T
YP
500
5
0
DIM B
500
5
00
500
5
00
50
50
500
5
0
143
50
Ideal Commercial
31
Condensing
Back to Back Frame & Header Kits6 x Evomax 30 - 100kW
300 650
182
427
Head
er K
its
Rat
ing
DIM
A
(mm
)D
IM B
(m
m)
DIM
C
(mm
)D
(DN
Fla
nge)
C
once
ntric
Fl
ue
UIN
2069
3530
-80k
W12
831
277
6D
N10
080
/125
100k
W22
450
410
96D
N10
010
0/15
0
(D) S
YS
TEM
RE
TUR
N
FL
AN
GE
CO
NN
BO
ILE
RS
ALL
DIM
EN
SIO
NS
AR
E IN
mm
BE
TWE
EN
(D) S
YS
TEM
FLO
W
FL
AN
GE
CO
NN
parti
cula
r sys
tem
.of
the
asse
mbl
y to
sui
t nee
ds o
f eac
h
Not
e: M
ixin
g he
ader
and
gas
con
nect
ions
ca
n be
loca
ted
eith
er o
n th
e LH
S o
r RH
S
Fram
e &
hea
der K
its 3
0-10
0kW
UIN
2069
35 w
ith
6 x
Evo
max
30
-100
kW b
oile
rs m
ount
ed b
k to
bk
165
0 2
5 2
5
203
0
2" B
SP
Fem
ale
Gas
Con
nect
ion
200 850
530
950
380
1945
DIM
C
BE
TWE
EN
BO
ILE
RS
500
5
00
264
CR
S
500
DIM B
550
CR
S T
YP
DIM A
50
50
DIM A
Ideal Commercial
Clas
s 5
NOx
Com
pact
Disp
lay
Digi
tal
5
Prot
ectio
nFr
ost
Flue
Vari
ants
12kWCH
24kWCH
15kWCH
18kWCH
30kWCH
60kWCH
37kWCH
45kWCH
100kWCH
80kWCH
24kWDH
W 30kWDH
W
1
2
Floo
r St
andi
ngCo
mpa
ct
Diag
nost
ics
Clea
r
Wal
l Hun
gCo
mpa
ct
Stan
ding
Floo
r
Year
War
rant
y
Year
War
rant
yYe
arW
arra
nty
ABC
the
UK
Mad
e in
Clas
s 5
NOx
Com
pact
Disp
lay
Digi
tal
5
Prot
ectio
nFr
ost
Flue
Vari
ants
12kWCH
24kWCH
15kWCH
18kWCH
30kWCH
60kWCH
37kWCH
45kWCH
100kWCH
80kWCH
24kWDH
W 30kWDH
W
1
2
Floo
r St
andi
ngCo
mpa
ct
Diag
nost
ics
Clea
r
Wal
l Hun
gCo
mpa
ct
Stan
ding
Floo
r
Year
War
rant
y
Year
War
rant
yYe
arW
arra
nty
ABC
the
UK
Mad
e in
Clas
s 5
NOx
Com
pact
Disp
lay
Digi
tal
5
Prot
ectio
nFr
ost
Flue
Vari
ants
12kWCH
24kWCH
15kWCH
18kWCH
30kWCH
60kWCH
37kWCH
45kWCH
100kWCH
80kWCH
24kWDH
W 30kWDH
W
1
2
Floo
r St
andi
ngCo
mpa
ct
Diag
nost
ics
Clea
r
Wal
l Hun
gCo
mpa
ct
Stan
ding
Floo
r
Year
War
rant
y
Year
War
rant
yYe
arW
arra
nty
ABC
the
UK
Mad
e in
Clas
s 5
NOx
Com
pact
Disp
lay
Digi
tal
5
Prot
ectio
nFr
ost
Flue
Vari
ants
12kWCH
24kWCH
15kWCH
18kWCH
30kWCH
60kWCH
37kWCH
45kWCH
100kWCH
80kWCH
24kWDH
W 30kWDH
W
1
2
Floo
r St
andi
ngCo
mpa
ct
Diag
nost
ics
Clea
r
Wal
l Hun
gCo
mpa
ct
Stan
ding
Floo
r
Year
War
rant
y
Year
War
rant
yYe
arW
arra
nty
ABC
the
UK
Mad
e in
Clas
s 5
NOx
Com
pact
Disp
lay
Digi
tal
5Pr
otec
tion
Fros
t
Flue
Vari
ants
12kWCH
24kWCH
15kWCH
18kWCH
30kWCH
60kWCH
37kWCH
45kWCH
100kWCH
80kWCH
24kWDH
W 30kWDH
W
1
2Fl
oor
Stan
ding
Com
pact
Diag
nost
ics
Clea
r
Wal
l Hun
gCo
mpa
ct
Stan
ding
Floo
r
Year
War
rant
y
Year
War
rant
yYe
arW
arra
nty
ABC
the
UK
Mad
e in
Boiler Frame and Header Kits
The Low Height Frame and Header Kits make installation much
simpler in circumstances of reduced headroom, offering an
option of replacing a floor standing atmospheric boiler with a
high efficiency model.
Three options are available allowing for outputs from 30 kW to 450 kW.
Low Height Frame and Header Kits
Evomax Cascade
32
Features and benefits
• Frame and Header Kits fit easily through standard
doorways
• Lift weights are as low as possible
• The Low Height Frame and Header Kit is
supplied on one palette shrink wrapped together
with all ancillary fittings needed for assembly
• All pipe work connections are supplied with
either the boiler, header kit or are preassembled
to the header kit
• Preassembled to header; the boiler the flow
and return flexible connections, which reduce
installation time
• Delivered with header kit; connection pipe
assembly, non return valves & pipe work
connector all isolation valves, pressure relief
valve, drain cock and associated fittings
• The Low Height Frame and Header Kit can
be installed with either an Ideal Commercial
Sequencer offering direct modulation of the system,
reducing running costs, or a proprietary option
• The extremely compact dimensions allow for
replacement of existing standard efficiency floor
standing boilers, using a single wall mounted
condensing boiler up to 150 kW allowing sufficient
space to install flue system, pump and pipe
headers
• High quality and well-finished components
• Supplied with frames and low energy modulating
pumps (ErP approved)
Please note, the Evomax boilers are to be ordered separately.
Models Size
1 boiler 30-150 DN50 (2"BSP)
2 boilers 60-300 DN65
3 boilers 90-450 DN80
Available options
50
500 500 500
50
DIM
A )
DIM
B
550 144CRS
25 1650
25
(D)
(D) System flowflange connection
System returnflange connection
Betweenboilers
Betweenboilers
642
850
552
410
450
DIM C
1550
120
299
Boiler Evomax
Low loss header kit ✓
Optional kits
Ideal Commercial
In-line Frame and Header Kits 3 x Evomax 30 - 150 kW
33
Frame and H
eader Kits
50
500 500 500
50 D
IM A
)
DIM
B
550 144CRS
25 1650
25
(D)
(D) System flowflange connection
System returnflange connection
Betweenboilers
Betweenboilers
642
850
552
410
450
DIM C
1550
120
299
50
500 500 500
50
DIM
A )
DIM
B
550 144CRS
25 1650
25
(D)
(D) System flowflange connection
System returnflange connection
Betweenboilers
Betweenboilers
642
850
552
410
450
DIM C
1550
120
299
50
500 500 500
50
DIM
A )
DIM
B
550 144CRS
25 1650
25
(D)
(D) System flowflange connection
System returnflange connection
Betweenboilers
Betweenboilers
642
850
552
410
450
DIM C
1550
120
299
Output
DIM A
DIM B
DIM C
D (DN flange)
Concentric flue
30-150 kW 130 642 410 DN50 (2"BSP) 80/125
60-300 kW 226 642 570 DN65 100/150
90-450 kW 233 642 660 DN80 100/150
Ideal Commercial
8 EVOMAX - Frame & Header Kits
4 InstallatIon DraWInGs for MultIPlE BoIlEr systEMs
4.1 GEnEral
The multiple boiler systems are available in one side by side format:• 1 to 3 boilers in a linear configuration, mounted on a free-standing frame.These boiler and cascade systems are sized to provide a flow and return differential 20º∆T.
4.2 InstallatIon DraWInG WItH 1 30-150 BoIlEr
Low Height Frame & Header Kits1 x Evomax 30 - 150kW
34
Ideal Commercial
In-line Low Height Frame & Header Kits2 x Evomax 30 - 150kW
In-line Low Height Frame & Header Kits3 x Evomax 30 - 150kW
35
Frame and H
eader Kits
Ideal Commercial
Low Height Frame and Header Kit System Design Options
Total OutputRequired kW
No. of Boilers Header
Side by SideFootprint SizeW x D (mm)
Optional Low Loss Header Boiler Models Frame/Header
Product No.
30 1 DN50 550 x 642 209394 1 21001240 1 DN50 550 x 642 209394 1 21001260 1 DN50 550 x 642 209394 1 21001280 1 DN50 550 x 642 209394 1 210012
100 1 DN50 550 x 642 209394 1 210012120 1 DN50 550 x 642 209394 1 210012150 1 DN50 550 x 642 209394 1 21001260 2 DN65 1100 x 642 209395 2 x 30 21002970 2 DN65 1100 x 642 209395 1 x 30 + 1 x 40 21002980 2 DN65 1100 x 642 209395 2 x 40 21002990 2 DN65 1100 x 642 209395 1 x 60 + 1 x 30 210029
100 2 DN65 1100 x 642 209395 1 x 60 + 1 x 40 210029110 2 DN65 1100 x 642 209395 1 x 80 + 1 x 30 210029120 2 DN65 1100 x 642 209395 2 x 60 210029130 2 DN65 1100 x 642 209395 1 x 100 + 1 x 30 210029140 2 DN65 1100 x 642 209395 1 x 80 + 1 x 60 210029140 2 DN65 1100 x 642 209395 1 x 100 + 1 x 40 210029150 2 DN65 1100 x 642 209395 1 x 120 + 1 x 30 210029160 2 DN65 1100 x 642 209395 2 x 80 210029160 2 DN65 1100 x 642 209395 1 x 100 + 1 x 60 210029180 2 DN65 1100 x 642 209395 1 x 100 + 1 x 80 210029180 2 DN65 1100 x 642 209395 1 x 120 + 1 x 60 210029180 2 DN66 1101 x 642 209395 1 x 150 + 1 x 30 210029190 2 DN65 1100 x 642 209395 1 x 150 + 1 x 40 210029200 2 DN65 1100 x 642 209395 2 x 100 210029200 2 DN65 1100 x 642 209395 1 x 120 + 1 x 80 210029210 2 DN65 1100 x 642 209395 1 x 150 + 1 x 60 210029220 2 DN65 1100 x 642 209395 1 x 120 + 1 x 100 210029230 2 DN65 1100 x 642 209395 1 x 150 + 1 x 80 210029240 2 DN65 1100 x 642 209395 2 x 120 210029250 2 DN65 1100 x 642 209395 1 x 150 + 1 x 100 210029270 2 DN65 1100 x 642 209395 1 x 150 + 1 x 120 210029300 2 DN65 1100 x 642 209395 2 x 150 21002990 3 DN80 1650 x 642 252437 3 x 30 210020
100 3 DN80 1650 x 642 252437 1 x 40 + 2 x 30 210020110 3 DN80 1650 x 642 252437 2 x 40 + 1 x 30 210020120 3 DN80 1650 x 642 252437 3 x 40 210020120 3 DN80 1650 x 642 252437 1 x 60 + 2 x 30 210020130 3 DN80 1650 x 642 252437 1 x 60 + 1 x 40 + 1 x 30 210020140 3 DN80 1650 x 642 252437 1 x 60 + 2 x 40 210020150 3 DN80 1650 x 642 252437 2 x 60 + 1 x 30 210020160 3 DN80 1650 x 642 252437 1 x 80 + 2 x 40 210020170 3 DN80 1650 x 642 252437 1 x 80 + 1 x 60 + 1 x 30 210020180 3 DN80 1650 x 642 252437 3 x 60 210020180 3 DN80 1650 x 642 252437 1 x 100 + 2 x 40 210020190 3 DN80 1650 x 642 252437 2 x 80 + 1 x 30 210020200 3 DN80 1650 x 642 252437 2 x 80 + 1 x 40 210020220 3 DN80 1650 x 642 252437 2 x 80 + 1 x 60 210020230 3 DN80 1650 x 642 252437 2 x 100 + 1 x 30 210020240 3 DN80 1650 x 642 252437 3 x 80 210020240 3 DN80 1650 x 642 252437 2 x 100 + 1 x 40 210020250 3 DN80 1650 x 642 252437 1 x 120 + 1 x 100 + 1 x 30 210020260 3 DN80 1650 x 642 252437 1 x 120 + 1 x 100 + 1 x 40 210020270 3 DN80 1650 x 642 252437 2 x 120 + 1 x 30 210020280 3 DN80 1650 x 642 252437 1 x 150 + 1 x 100 + 1 x 30 210020290 3 DN80 1650 x 642 252437 1 x 150 + 1 x 100 + 1 x 40 210020300 3 DN80 1650 x 642 252437 3 x 100 210020320 3 DN80 1650 x 642 252437 2 x 100 + 1 x 120 210020320 3 DN80 1650 x 642 252437 2 x 120 + 1 x 80 210020340 3 DN80 1650 x 642 252437 2 x 120 + 1 x 100 210020350 3 DN80 1650 x 642 252437 1 x 150 + 2 x 100 210020360 3 DN80 1650 x 642 252437 3 x 120 210020370 3 DN80 1650 x 642 252437 1 x 150 + 1 x 120 + 1 x 100 210020380 3 DN80 1650 x 642 252437 2 x 150 + 1 x 80 210020390 3 DN80 1650 x 642 252437 1 x 150 + 2 x 120 210020400 3 DN80 1650 x 642 252437 2 x 150 + + 1 x 100 210020420 3 DN80 1650 x 642 252437 2 x 150 + 1 x 120 210020450 3 DN80 1650 x 642 252437 3 x 150 210020
36
Ideal Commercial
37
Condensing
COUNCIL REDUCES LEISURE CENTRE RUNNING COSTS WITH IDEAL COMMERCIAL WALL HUNG BOILERS
Totton Health and Leisure
Leading British manufacturer Ideal Commercial has
supplied five Evomax high efficiency condensing wall
hung boilers to Totton Health and Leisure Centre in
Southampton, Hampshire, providing the solution to a
challenging array of installation requirements as well
as contributing to a 15% reduction in running costs.
Rob Sowden, Commercial Gas Engineer for New
Forest District Council, specified the five Evomax
80kW boilers, not only because he had installed
them before and knew them to be extremely reliable
and easy to maintain, but also because of the space
and energy saving capabilities the Evomax boilers
could offer.
The five Evomax wall hung boilers were supplied
complete with a dedicated frame and header kit
to make installation even easier and Rob worked
alongside Ideal Commercial technical experts to
resolve siting issues.
Rob affirmed, “The one-day service course I attended
at the Ideal Commercial Training Centre gave me
many useful ideas, which enabled the installation
to be completed on time with no disruption to the
Leisure Centre’s hot water and pool temperatures".
“This has been an incredibly successful
project”Rob Sowden
38
Ideal Commercial Training
Each course covers the following:
• Product range overview
• Product specification
• Application and installation of products
• Electronic circuits and components
• Flue and accessory options
• Component overview, change and repair
• User controls
• Sequence of operation
• Fault finding
• Commissioning
The course involves discussion with tutors and
demonstrations with practical advice.
Lunch and refreshments are provided and a
certificate is awarded upon completion.
Price £80.00 for 1 day(including VAT) per person
Price £160.00 for 2 days(including VAT) per person
Training
Tel: 01482 498432
These comprehensive one-day courses can be mixed
and matched for individual installation and servicing
companies. The course uses a simple step-by-step
approach with hands on training to ensure all aspects
of commissioning, servicing, and fault finding can be
dealt with quickly and efficiently.
Commercial Boiler Training Courses
1 and 2 days
Courses are available on the following products:
• Evomax range (1 day) - Leeds & Reading
• Evomod range (1 day) - Leeds
• Imax Xtra (1 day) - Leeds
• Concord CX range (2 days - Hull only)
• Concord Super range (2 days - Hull only)
39
Ideal Service & Support
At Ideal, we are committed towards delivering
the highest levels of customer service. With
over a century of experience in the heating
industry, we know how important confidence
and trust is to our customers.
You can be confident to know that you’re
partnering with a British manufacturer that’s
supported by a dedicated national service
team, delivering help and advice to you and
your customers throughout the year.
Our rigorous research and development
procedures and manufacturing quality control
checks, ensures that all of our products are
produced to the highest standards; delivering
total comfort and peace of mind.
The call centre team, based in Hull, East
Yorkshire, is comprehensively trained to
provide tailored advice. All calls will be
answered by trained members of staff who will
take ownership of the call. All of our trained
staff are on-hand to assist with enquiries or
help diagnose and resolve faults over the
telephone. Should that not be possible,
we will arrange an appointment for one of
our engineers to visit. Our dedicated team
of engineers are fully trained to exacting
standards and are all Gas Safe registered.
Ideal Commercial Boilers Service
Sales
Tel: 01482 498690
Fax: 01482 498299
Technical
Tel: 01482 498376
Fax: 01482 498621
Ideal Commercial Boilers
P.O. Box 103
National Avenue
Kingston Upon Hull
HU5 4JN
T: 01482 492251
F: 01482 448858
www.idealcommercialheating.com
02.14 210539
Boiler outputkW 20 40 100 150 200 600 800 1000 1500 3500
Btu/h (000) 68 136 340 511 682 2047 2729 3412 5118 11942
Atmospheric Boilers
Concord CXA/H
Concord CXS/H
Concord CXSi/H
Concord ESi
High Efficiency Boilers
Concord Super Series 4
Concord Super Plus
Condensing Boilers
Pressure Jet Boilers
Buccaneer GTE
Falcon GTS
Harrier GTS
Viceroy GTS
Viscount GTS
Vanguard L
40-120
40-120
110-180
50-600
200-600
21-39
105-330
300-780
754-1450
340-3500
30-150
40-100
140-380
Evomax
30-600Evomax Cascade
80-560Imax Xtra
250-1000Evomod
The Ideal Commercial Boilers product range
ApprovalThese appliances are certified to G.A.D. 90/396 and B.E.D. 92/42 Safety and Performance Directives for gas boilers.
Ideal Commercial Boilers pursues a policy of continuous improvement in design and performance of its products and reserves the right to vary specification without notice. Statutory rights of the consumer are not affected.
Please note:The information in this brochure was correct at the time of going to print. Ideal Commercial Boilers reserve the right to make any modifications to product specifications or any other details, without prior notification. For further clarification, please enquire in writing to the head office address (address below).
FM 59915 OHS 593264