Upload
wong-yit-sin
View
241
Download
2
Embed Size (px)
Citation preview
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 1/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 1 of 38
Keyboard Shortcuts
ETAP allows for commonly used keyboard shortcuts which are listed below:
Undo Control + Z
Redo Control + Y
Copy Control + C
Paste Control + V
Delete Control + X
Rotate 90 degrees Clockwise Control + R
Rotate 90 degrees Counterclockwise Control + Shift + R
Save Project Control + S
Save Project As Control + Shift + S
Open Project Control + O
Create New Project Control + N
Print Control + P
Print Preview Control + Shift + P
Pan Space Bar + Left Mouse
Fit in Window Control + 0
Copy and drag element to another window Control + Shift + Left Mouse Button
Switch Windows Control + F6
Previous Window Control + Shift + F6
Select all components in the active presentation Control + A
Deselect all components in the active presentation Control + Shift + A
Switch to the System Dumpster as the Active Window Control + D
Switch directly to Edit Mode Control + E
Brings up the Find tool window Control + F
Groups selected elements together Control + G
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 2/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 2 of 38
Ungroup Selected Elements Control + U
Brings up the Options/Preferences window Control + K
Switch to the module to the right of the active study Control + M
included in the mode toolbar
Closes the project file Control + Q
Move from Dumpster in Edit Mode Control + Shift + V
For selected components, increase the symbol size to the + “Plus Sign” next size: Size Range: 1-5
For selected components, decrease the symbol size to the - “Minus Sign”
next size: Size Range: 1-5
Switch Windows Control + F6
Go back to the previous Window Control + Shift + F6
Closes the active window/presentation Control + F4
Move selected elements left by 1 unit Control + Left Arrow
Move selected elements right by 1 unit Control + Right Arrow
Move selected elements up by 1 unit Control + Up Arrow
Move selected elements down by 1 unit Control + Down Arrow
Move selected elements left by 2 units Left Arrow
Move selected elements right by 2 units Right Arrow
Move selected elements up by 2 units Up Arrow
Move selected elements down by 2 units Down Arrow
Zoom into the One Line View Control + “Plus Sign”
Zoom out of the One Line View Control + “Minus Sign”
Zoom into the One Line View Control + Mouse Scroll Wheel Up
Zoom out of the One Line View Control + Mouse Scroll Wheel Down
Permanently delete selected elements without sending them Shift + Deleteto the dumpster
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 3/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 3 of 38
Menu Bar
The Menu bar contains a comprehensive list of menu options. Each option activates a drop-down list of commands
such as, File operations, Printing, Database Conversions, Data Exchange, OLE objects, Project Standards, ProjectSettings and Project Options, Libraries, Defaults, Annotation Fonts, Base and Revision Data, and more.
Project Toolbar
The Project toolbar contains buttons that provide shortcuts for many commonly used functions. Those functions are New Project, Open Project, Save Project, Print, Print Preview, Cut, Copy, Paste, Pan, Zoom, Back, Forward, Zoom
to Fit Page, Undo, Redo, Text Box, Grid Display, Continuity Check, Switching Interlock Enforcer (SIE), HyperlinkPower Calculator, Find, and Help.
New
Open
Close
PrintPreview
Cut
Copy
PastePan
ZoomIn
ZoomOut
Back
Forward
ZoomtoFitPage
Undo
Redo
TextBox
PolylineTextBox
ShowGridLines
CheckContinuitySIE
Hyperlinks
PowerCalculator
Find
Help
Theme Toolbar
The Theme toolbar contains buttons that allow you to perform shortcuts using commands to change color and line
styles for device connectors, symbol color, and background.
ThemeManager
ThemeName
ThemeColorCoding
ThemeName
ColorsNormal
ColorsCustom
EnableContouring
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 4/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 4 of 38
3-D Database Toolbar
ETAP organizes an electrical system into a single project. Within this project, ETAP creates three major systemcomponents:
Presentation - Unlimited, independent graphical presentations of the one-line diagram that represent design data for
any purpose (such as impedance diagram, study results, or plot plan).
Configuration - Unlimited, independent system configurations that identify the status of switching devices (open and
closed), motors and loads (continuous, intermittent, and spare), generator operating modes (swing, voltage controlreactive power control, power factor control) and MOVs (open, closed, throttling, and spare).
Revision Data - Base Data and unlimited Revision Data IDs that keep track of the changes and modifications to theengineering properties (for example, nameplate or settings) of elements.
1. Data Manager
2. Revision Data
3. New Presentation
4. Current Presentation
5.
Current Composite
6. Configuration Manager
7. Configuration Status
8.
Schedule Report Manager
9. Cable Manager
The Schedule Report Manager allows you to preview and print the input data, for elements shown on the Branch,
Bus and Load pages, using the Crystal Reports formats.
The Cable Manager allows the “batch” management of all the cable data, as they appear in the Cable Editors of each
cable. The Cable Manager shows cable data in a consolidated fashion in a grid; with the presence of intelligent filterscables can be searched and grouped by their relevant parameters, thereby simplifying their engineering management.Cable Manager allows batch reporting and selecting from library.
21 3 4 5 6 7 8 9
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 5/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 5 of 38
Edit Mode
Here you can graphically add, delete, relocate, and connect elements, zoom in or out, display grid off or on, changeelement size, change element orientation, change symbols, hide or show protective devices, enter properties, set
operating status, and more.
Edit Mode
Select Status Configuration
Unlimited Number of Configurations toSave Status of Switching Devices/Loads
Select Mode
Edit Mode: Drag/Drop & Connect Elements
Study Mode: Edit Mode, Load Flow, Short-Circuit, etc.
System Manager
One-Line Diagram
In Edit Mode
Help Line
Displays the description for every entry field
Edit Toolbar
AC Elements
DC Elements
Instrument
Devices
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 6/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 6 of 38
Edit Toolbars
The Edit toolbars are active when you are in Edit Mode. You can click or double-click to select, drag and drop ACDC, and instrument elements on the one-line diagrams. Additionally, you can perform the following functions:
View & Print Customizable Output Reports (Text & Crystal Reports)
Change Display Options Access Schedule Report Manager
Add New Ground Grid Systems
Add Composite Networks & Composite Motors
AC Edit Toolbar:
Pointer
Bus/Node
Auto Connection
Transformer, 2-Winding
Transformer, Open-DeltaCable
Reactor, Current Limiting
Transformer, 3-Winding
Bus DuctTransmission Line
Impedance
Power Grid (Utility System)
Wind Turbine Generator
Induction Machine
Lumped Load
Static Load
Panel System
Remote Connector
Grounding/Earthing Adapter
Static Var Compensator
Generator, Synchronous
PV Array
Motor, Synchronous
Motor Operated Valve (MOV)
Capacitor
Harmonic Filter
Phase Adapter
MG Set (Rotary UPS)
HVDC Transmission Link
Composite Motor Composite Network
Fuse
High Voltage Circuit Breaker
Recloser
Overload Heater
Single Throw Switch
Contactor
Low Voltage Circuit Breaker
Ground Switch
In-line Overload Relay
Double Throw Switch
Instrumentation Toolbar
Display Options
Ground Grid
Schedule Report Manager
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 7/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 7 of 38
Instrumentation Element Toolbar:
Current Transformer Potential Transformer
Voltmeter
Multimeter
Ammeter
Voltage Relay
Frequency Relay
Motor Relay
Differential Relay
Tag Link
Power Relay
MV Solid State Relay
Overcurrent Relay
Multi-Function Relay
DC Edit Toolbar:
Pointer DC Bus
DC Cable
DC-DC Converter
DC Impedance
Battery
DC Motor
DC Lumped Load
DC PV Array
DC Static Load
DC Composite CSD
DC Composite Motor DC Composite Network
DC Circuit Breaker
DC Switch, Single-Throw
DC Fuse
DC Switch, Double-Throw
Uninterruptible Power Supply (UPS)
Charger
Variable Frequency Drive (VFD)
Inverter
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 8/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 8 of 38
Study Modes
ETAP provides the following study modes from the one-line diagram:
1. Load Flow Analysis
2.
Short-Circuit Analysis
3. Arc Flash Analysis
4.
Motor Acceleration Analysis
5. Harmonic Analysis
6. Transient Stability Analysis
7.
Star – Protection and Coordination Analysis
8. DC Load Flow Analysis
9. DC Short-Circuit Analysis
10.
DC Arc Flash Analysis
11. Battery Sizing and Discharge Analysis
12. Unbalanced Load Flow Analysis
13. Optimal Power Flow Analysis
14. Reliability Assessment
15.
Optimal Capacitor Placement
16.
Switching Sequence Management
17. Contingency Analysis
1716321 654 7 1098 11 141312 15
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 9/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 9 of 38
System Toolbar
The System toolbar is a convenient and efficient method of switching between ETAP systems. When navigatingfrom one ETAP system to another using this toolbar, ETAP will open the last accessed presentation for the selectedsystem. For example, if you are switching from Network Systems to Star Systems, ETAP will check for an existingStar View. If Star Views exist, ETAP will open the last accessed Star View and make it the active window.
System Manager
One-Line Diagrams
Star Systems
Underground Raceway Systems
Ground Grid Systems
Cable Pulling Systems
ETAP Real-Time Systems
Geographical Information Systems (Data Adapter)
AC Control Systems Diagram (CSD)
DC Control Systems Diagram (CSD)
Geographical Information Systems (GIS View)
User-defined Dynamic Model (UDM) Graphical Editor
System Dumpster
Scenario Wizard
Study Wizard
Project Wizard
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 10/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 10 of 38
ETAP Wizards
ETAP includes time-saving project management tools called the ETAP Wizards, which allow youto record and run any study at any time. The ETAP Wizards include the Scenario Wizard, StudyWizard, and Project Wizard.
Using the ETAP Wizards, you will be able to combine the orthogonal tools (Presentations,
Configurations, and Revision Data), study types, output reports, and study cases (the loading andgeneration system operation factors together with solution parameters) to perform a complete
system study with the click of a button.
Scenario Wizard:
A scenario allows you to group all study options into one place.
Study Wizard:
Study Wizard enables you to sequentially group existing scenarios into study macros.
Project Wizard:
Project Wizard enables the user to group existing study macros into project macros.
Scenario Wizard
Study Wizard
Project Wizard
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 11/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 11 of 38
Crystal Reports®
ETAP uses the Crystal Reports program to generate output reports. Crystal Reports is a reporting tool withcustomizable report formats with full-color presentation-quality. ETAP provides a number of different report formatsfor various analyses, library data, and schedules.
LoadFlow
ReportManager
Button ReportManager
Button
Input,
Results,&
Summary
Data
Selected Report Formats
SQL Database
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 12/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 12 of 38
Building a One-Line Diagram
To build or edit a one-line diagram in ETAP, you must be in Edit Mode. Click the Edit button on the Mode
toolbar.
On the AC Edit toolbar, select a Power Grid (Utility) element by clicking on the Power Grid
button. The cursor will change to the Power Grid icon when moving over the OLV. Click anywhere in
the OLV to place a Utility on your one-line diagram.
By following the same procedure, insert the following elements until your OLV appears as
follows:
You can stretch buses by placing the mouse pointer over either end of the bus, until a double
arrow appears. Then click and drag to the desired length.
Now connect the elements in the one-line. Place the mouse pointer over the connection pin of
an element, and it will turn red. Then click and drag to the connection pin of another element. Follow this procedure to connect all the elements on the one-line. In the case of buses, the entire element graphic
functions as a connection point. Notice that a node is automatically inserted when connecting the cable to thetransformer.
☺Helpful Tips…
Double-clicking on an element button allowsyou to drop it more than once. When finished
just press the Esc key.
☺Helpful Tips…
You can zoom in , zoom out , and
zoom to fit page the OLV by clicking
on the respective buttons located in theProject Toolbar.
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 13/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 13 of 38
Libraries
ETAP provides customized libraries for many devices for which typical, standard, and manufacturer information has been compiled. Additional devices may be added to each library through ETAP’s library editors. ETAP library files
have the extension .lib and by default are located in the ‘Lib’ folder within the ETAP application folder. ETAPdisplays this path along with the name of the current library in the System Manager.
You may access library data through the Crystal Report format by clicking the Library button at the top of the screenand selecting Export.
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 14/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 14 of 38
Load Flow Analysis
Click the Load Flow Analysis button on the Mode toolbar to switch to Load Flow Analysis mode.
Run Load Flow Studies
Auto Run
Halt Current Calculation
Alert View
Report Manager
Load Flow Result Analyzer
Load Flow Comparator
Display Options
Unit Display Options
Power Flow Display Options
Voltage Display Options
Load Terminal Voltage
Line / Cable Voltage Drop
Panel / Single Phase System
Get Online Data
Get Archived Data
Run SLE Load Flow
Load Analyzer
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 15/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 15 of 38
Short-Circuit Analysis
ANSI Short-Circuit Toolbar
This toolbar is active when you are in Short-Circuit Mode and the standard is set to ANSI in the Short-Circuit StudyCase Editor.
3-Phase Faults – Device Duty
Panel / 1-Phase UPS / 1-Phase System Device Duty
LG, LL, LLG & 3-Phase Faults – ½ Cycle
LG, LL, LLG & 3-Phase Faults – 1.5 - 4 Cycle
LG, LL, LLG & 3-Phase Faults – 30 Cycle
Display Options
Alert View
Report Manager
Short-Circuit Result Analyzer
Halt Current Calculation
Get Online Data
Get Archived Data
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 16/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 16 of 38
IEC Short-Circuit Toolbar
This toolbar is active when you are in Short-Circuit Mode and the standard is set to IEC in the Short-Circuit StudyCase Editor.
3-Phase Faults – Device Duty (IEC 60909)
Panel / 1-Phase UPS / 1-Phase System Device Duty
LG, LL, LLG & 3-Phase Faults (IEC 60909)
3-Phase Faults – Transient Study (IEC 6136)
Display Options
Alert View
Report Manager
Plots
Short-Circuit Result Analyzer
Halt Current Calculation
Get Online Data
Get Archived Data
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 17/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 17 of 38
GOST Short-Circuit Toolbar
This toolbar is active when you are in Short-Circuit Mode and the standard is set to GOST in the Short-Circuit StudyCase Editor.
3-Phase Device Duty
Maximum LG, LL, LLG & 3-Phase Faults
Maximum LG, LL, LLG & 3-Phase Faults
Display Options
Unit Display Options
Fault Current Type Display Options
Alert View
Report Manager
Halt Current Calculation
Get Online Data
Get Archived Data
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 18/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 18 of 38
Arc Flash Analysis
Click the Arc Flash Analysis button on the Mode toolbar to switch to Arc Flash Analysis mode.
Run Global 3-Phase Arc Flash Analysis Calculation
Run Global 1-Phase Arc Flash Analysis Calculation
AF SQOP Fault Insertion (drop on bus to place an AF SQOP simulation)
AF SQOP Fault Insertion (for 1-phase to be enabled in a future release)
AF SQOP Event Viewer
Create a TCC from Arc Flash Mode (same as creating a TCC from Star mode)
Append a device to an existing TCC (same as append in Star Mode)
Display Options
Alert View
Report Manager
Arc Flash Result Analyzer
Halt Current Calculation
Get Online Data
Get Archived Data
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 19/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 19 of 38
Motor Acceleration Analysis
Click the Motor Acceleration Analysis button on the Mode toolbar to switch to Motor Acceleration Analysis mode.
Run Dynamic Motor Starting
Run Static Motor Starting
Display Options
Alert View
Report Manager
Plots
Halt Current Calculation
Get Online Data
Get Archived Data
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 20/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 20 of 38
Harmonic Analysis
Click the Harmonic Analysis button on the Mode toolbar to switch to Harmonic Analysis mode.
Run Harmonic Load Flow
Run Frequency Scan
Display Options
Alert View
Report Manager
Plots
Halt Current Calculation
Get Online Data
Get Archived Data
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 21/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 21 of 38
Transient Stability Analysis
Click the Transient Stability Analysis button on the Mode toolbar to switch to Transient Stability Analysis mode.
Run Transient Stability
Display Options
Alert View
Report Manager
Action List
Plots
Halt Current Calculation
Get Online Data
Get Archived Data
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 22/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 22 of 38
Star Protection and Coordination Analysis
Click the Star Protection and Coordination Analysis button on the Mode toolbar to switch to Star Protection and
Coordination Analysis mode.
Create Star View
Star View Manager
Run / Update Short-Circuit Clipping kA
Run / Update 1-Phase Short-Circuit Clipping kA
Fault Insertion (PD Sequence-of-Operation)
Sequence Viewer
Path Detection Tools
Protection Zone Viewer
Star Auto-Evaluation
Star Auto-Evaluation Report Viewer
Display Options
Report Manager
Device Settings Report
Halt Current Calculation
Halt Current Calculation
Get Online Data
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 23/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 23 of 38
DC Load Flow Analysis
Click the DC Load Flow Analysis button on the Mode toolbar to switch to DC Load Flow Analysis mode.
Run DC Load Flow Studies
Display Options
Report Manager
Halt Current Calculation
Get Online Data
Get Archived Data
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 24/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 24 of 38
DC Short-Circuit Analysis
Click the DC Short-Circuit Analysis button on the Mode toolbar to switch to DC Short-Circuit Analysis mode.
Run DC Short-Circuit Studies
Display Options
Report Manager
Halt Current Calculation
Get Online Data
Get Archived Data
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 25/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 25 of 38
DC Arc Flash Analysis
Click the DC Arc Flash Analysis button on the Mode toolbar to switch to DC Arc Flash Analysis mode.
Run DC Arc Flash Studies
Create Star View
Star View Manager
Display Options
Report Manager
DC Arc Flash Result Analyzer
Halt Current Calculation
Get Online Data
Get Archived Data
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 26/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 26 of 38
Battery Discharge and Sizing
Click the Battery Discharge and Sizing button on the Mode toolbar to switch to Battery Discharge and Sizing mode.
Run Battery Sizing Study
Run Battery Discharge Calculation
Display Options
Report Manager
Plots
Halt Current Calculation
Get Online Data
Get Archived Data
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 27/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 27 of 38
Unbalanced Load Flow Analysis
Click the Unbalanced Load Flow Analysis button on the Mode toolbar to switch to Unbalanced Load Flow Analysismode.
Run Unbalanced Load Flow Studies
Run Open Phase Fault Studies
Halt Current Calculation
Alert View
Report Manager
Plots
Display Options
Unit Display Options
Power Flow Display Options
Voltage Display Options
Show Average / Phases
Load Terminal Voltage
Line / Cable Voltage Drop
Panel / Single Phase System
Get Online Data
Get Archived Data
Unbalanced Load Flow Comparator
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 28/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 28 of 38
Optimal Power Flow Analysis
Click the Optimal Power Flow Analysis button on the Mode toolbar to switch to Optimal Power Flow Analysis
mode.
Run Optimal Power Flow
Display Options
Report Manager
Halt Current Calculation
Get Online Data
Get Archived Data
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 29/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 29 of 38
Reliability Assessment
Click the Reliability Assessment button on the Mode toolbar to switch to Reliability Assessment mode.
Run Distribution System Reliability Analysis
Display Options
Output Report
Plots
Halt Current Calculation
Get Online Data
Get Archived Data
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 30/38
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 31/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 31 of 38
Switching Sequence Management
Click the Switching Sequence Management button on the Mode toolbar to switch to Switching Sequence
Management mode.
Run Switching Sequence
Display Options
Report Manager
Halt Current Calculation
Get Online Data
Get Archived Data
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 32/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 32 of 38
Contingency Analysis
Click the Contingency Analysis button on the Mode toolbar to switch to Contingency Analysis mode.
Run Contingency Analysis
Display Base Load Flow
Display CA Load Flow
Display Options
Report Summary
Report Manager
Performance Index List
Halt Current Calculation
Get Online Data
Get Archived Data
Action List
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 33/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 33 of 38
Underground Raceway Systems
Click the Underground Raceway Systems button on the System toolbar to switch to Underground Raceway Systemsmode.
Edit Mode
Select Edit in the Underground Raceway Systems Mode toolbar to switch to Edit Mode.
Pointer
Existing Direct Buried Raceway
Existing Cable
Existing Duct Bank Raceway
New Conduit
Existing External Heat Source
Display Options
New Raceway
New Direct Buried Raceway
New Cable
New Duct Bank Raceway
New Location
New External Heat Source
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 34/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 34 of 38
Study Toolbar
Select U/G Cable Raceways in the Underground Raceway Systems Mode toolbar to switch to Study Mode.
Steady-State Cable Temperature Calculation
Cable Ampacity Calculation, Uniform Ampacity
Cable Ampacity Calculation, Uniform Temperature
Cable Sizing
Transient Cable Temperature Calculation
Display Options
Report Manager
Plots
Halt Current Calculation
Get Online Data
Get Archived Data
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 35/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 35 of 38
Ground Grid Systems
The Ground Grid Systems Presentation is a separate application within ETAP. New grid systems may be created byclicking on the Ground Grid element button on the AC Edit toolbar and then clicking in your OLV to place theelement. Double-click the grid graphic in the OLV to open the Ground Grid Presentation window. Choose a default
calculation method to begin.
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 36/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 36 of 38
Users may click the Ground Grid Systems button on the System toolbar to switch to Ground Grid Systems mode.
Edit Toolbar
Select the Edit button in the Ground Grid Systems Mode toolbar to switch to Edit Mode.
The IEEE Editor Toolbar appears when the IEEE Study Model is selected. The FEM Editor Toolbar appears when
the FEM Study Model is selected.
IEEE Editor Toolbar Finite Element Method (FEM) Editor Toolbar
Pointer
IEEE Rectangular Shape
IEEE T-Shape
IEEE L-Shape
IEEE Triangular Shape
Pointer
Conductor
Rod
FEM Rectangular Shape
FEM T-Shape
FEM L-Shape
FEM Triangular Shape
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 37/38
This document and the information within it are confidential and proprietary to ETAP/Operation Technology, Inc. and may not be modified, copied, published, disclosed, distributed, displayed or exhibited in either electronic or printed formats without the written authorization of ETAP/Operation
Technology, Inc., 17 Goodyear, Irvine, CA 92618, USA. © 2015 ETAP/Operation Technology, Inc. All Rights Reserved. Page 37 of 38
Study Toolbar
Select the Ground Grid Study button in the Ground Grid Systems Mode toolbar to switch to Study Mode.
Ground-Grid Calculation
Optimized Conductors
Optimized Conductors and Rods
Summary and Warning
Display Options
Plot Selection
Report Manager
Stop
8/19/2019 ETAP Shortcuts Buttons - 14.0
http://slidepdf.com/reader/full/etap-shortcuts-buttons-140 38/38
Cable Pulling Systems
Click the Cable Pulling Systems button on the System toolbar to switch to Cable Pulling Systems mode.
Existing Cable
New Cable
New Segment
Calculate Cable Pulling
Report Manager
Summary and Warning
Display Options