Upload
erkegroup
View
252
Download
0
Embed Size (px)
Citation preview
8/7/2019 ERKE Group, Soilmec SM-8G Anchoring
1/12
SM-8GHydraulic Microdrilling Rig
SM-8GSOIL INVESTIGATION
CORING
MICROPILES
JET GROUTING
TOP HAMMER
8/7/2019 ERKE Group, Soilmec SM-8G Anchoring
2/12
Safety
Designed to comply with EN and ISO safety
standards.
SM8G is manufactured, tested and certified
to give maximum operator protection
Hydraulic board control and remoteboard control (on request) are designed
for operator comfort and ease of use
Built-in safety devices in order to reduce
any possible accidental operation
Operators view is increased to give
a better visibility and guarantee the
maximum safety condition.
Easy and safe accessibility to the bonnet
for maintenance and inspection
Reduced environmental impact with
lower noise levels, reduction in exhaust
emissions and improved fuel economy
Performances
Versatile multipurpose rig for a wide range
of possible civil engineering applications.
The use of powerful engines, high
standard components and advanced
circuit design has enabled Soilmec to
increase performance and reliability
under extreme conditions.
Range of high performance rotaries
available.
The choice between different
combinations of mast length makes the
rig easily adaptable to several headroomcondition
Smart and compact design for fast
assembly and easy transport.
Minimum operating cost.
The Soilmec advantage
A real multifunctional machine designed
from scratch to give you the best drilling
solution
Long life expectancy with a high residual
value
Best price/performance ratio Built with customer in mind
Quality
Each micro drilling rig is subject to
extensive testing prior to dispatch.
Soilmec Quality System complying with
ISO 9001:2000 and ISO 14001:2004
standards.
Low maintenance requirements thanks to components of the highest quality.
Soilmec constant support thanks to
quick acting after sales service, reliable
customer care, efficient spare parts
service and fast delivery.
8/7/2019 ERKE Group, Soilmec SM-8G Anchoring
3/12
Deutz TCD 2012 L04Power @ 2000 rpm 85 kW 114 HP
Operating weight (approx) 8200 kg 18078 lbs
Feed / retraction force 100 kN 22480 lbs
Max rotary rpm 822@51 daNm 822@369 lbf.ft
5
7
6
4
1 23
1
5
3
7
2
6
4
Undercarriage
Machine Body
Control Board
Rotary
Breaker
Clamp
Mast
8/7/2019 ERKE Group, Soilmec SM-8G Anchoring
4/12
VERTICAL CONFIGURATION
SM8G is a new multipurpose drilling
rig dedicated to soil exploration and
geotechnical purposes meeting all CE
safety standards for hydraulic rig.
Thanks to high versatility of its equipments,
SM8G can support most drilling methods
on your jobsite: wire-line and conventional
continuous diamond coring; as well as DTH
and top-hammer drilling; and drilling methods
like TUBEX, ODEX and SIMMETRIX.Its special and optimized rotary assembly
allows to SM8G to be particularly suitable to
reach high drilling speed (926 rpm) for great
performance.
The Cylinder crowd system, hoist force: 100
kN, finds no comparison in the market when
compact rigs are taken into consideration.
Hydraulic side shifting of rotary drive allows
a clear access to the drill hole and a easier
loading rods.
Hydraulic standard clamp and breaker (60-
260mm) for quickly and safely making and
breaking rod joints.
Ergonomic drilling control board is connecton rig to guarantee the best view of the drill
hole.
Optional:
Fully automatic SPT hammer for testing
and sampling mounted on board.
On board triplex water/mud pump
capable of delivery of 200 l/min @ 45bar
Safety cage with low speed and low
torque kit
Different Higher torque rotary heads
Cable remote control for rig tracking
Jet grouting kit capable to reach 12m oftreatment in single pass.
8/7/2019 ERKE Group, Soilmec SM-8G Anchoring
5/12
MAIN FEATURES
Soilmec rotaries, designed and
manufactured to meet the need for
increased production and performance
on various applications, with the added
benefit of increased component life and
reliability.
Heavy duty mast design
Fixed kinematic mechanism complete
with special side tilting of +/-13
High hoist force by cylinder
Hydraulic service winch with 2000 daN
line pull
Foam pump and oil lubricator fitted on
standard composition
Automatic SPT, wire-line and mud pump
are available on request
Designed to be particularly versatile for
different drill-methods.
Easy conversion in jet grouting
configuration
8/7/2019 ERKE Group, Soilmec SM-8G Anchoring
6/12
TECHNICAL DATA
Operating weight : 8350 kg 18408 lb
Hydraulic Rotary head
Reccomended: HR9G HR10L HR10GL
Mast assembly
Rod lenght type (c/w one rotary head) 3 m 9,8 ft
Hoist & Feed system
Feed type Cylinder
Feed stroke 3750 mm 147 in
Maximum hoist pull 100 kN 22480 lbf
Maximum feed force 73 kN 16410 lbf
Service winch complete with jib
Line pull (1st layer): 20 kN 4496 lbf
Rope diameter: 10 mm 0,4 in
Clamp & hydraulic joint breaker
Nominal size 60-260 mm 2,6-10,2 in
Maximum clamping force 125 kN 28100 lbf
Maximum breaking torque 4100 daNm 30239 lbf.ft
Jet grouting
Rod diameter 90 mm 3,5 in
Max treatment depth in single pass 12 m 40 ft
Operative weight in jet configuration 9200 kg 20282 lb
Fully automatic SPT hammer for testing and sampling
mounted on board.
On board triplex water/mud pump capable of delivery of 200
l/min @ 45bar
Safety cage with low speed and low torque kit
Different Higher torque rotary heads
Cable remote control for rig tracking Jet grouting kit capable to reach 12m of treatment in single
pass.
Top hammer kit
Standard Equipment Optional Equipment
Rotary head HR9G type complete with Rollstar gear box (max
drilling speed: 926 rpm)
Heavy duty drill mast with 3750 mm stroke
Clamp and breaker 60-260 mm
Mast side tilting +/- 13
Mast forward tilting of 7,7
Service winch complete with jib Foam pump
Inline air lubricator
Pressure washer
Prearrangement for mud pump
8/7/2019 ERKE Group, Soilmec SM-8G Anchoring
7/12
HR9G Model Rollstar
Type 6 gear box 6 gear box
Max torque 822 daNm 6063 lbf.ft
Max speed 926 rpm 926 rpm
Hollow shaft 90 mm 3,5 in
Gear box type 3 mechanical + 2 mechanical shift gears 3 mechanical + 2 mechanical shift gears
HR10G Model Volvo
Type Variable Variable
Max torque 1063 daNm 7840 lbf.ft
Max speed 381 rpm 381 rpm
Hollow shaft 76 mm 3 in
Gear box type 2 mechanical + variable motor 2 mechanical + variable motor
HR10GL Model Volvo
Type Variable VariableMax torque 1024 daNm 5133 lbf.ft
Max speed 353 rpm 862 rpm
Hollow shaft 90 mm 2,6 in
Gear box type 2 mechanical + variable motor 2 mechanical + variable motor
TECHNICAL DATA - ROTARY DRIVE
8/7/2019 ERKE Group, Soilmec SM-8G Anchoring
8/12
TECHNICAL DATA
Diesel Engine*
Model Deutz TCD2012-L04 Deutz TCD2012-L04
Rated output ISO 3046-I 85 @ 2000 rpm 114 HP
Engine conforms to Exhaust emission Stan-dard
UE 2004/26/CE Stage IIIA - US EPA
nonroad Tier 3
UE 2004/26/CE Stage IIIA - US EPAnonroad Tier 3
Diesel tank capacity 130 l 34,3 US gal
Sound power level & Sound pressure level LWA 115 - LpA 81 dB(A) LWA 115 - LpA 81 dB(A)
Hydraulic systemMain pumps: variable axial pumps L.S. 149 /min 39,4 US gal/min
Set pressure main pumps 25 MPa 250 bar
Auxiliary pumps: gear pumps 71+46+29+23 l/min 18,8+12,2+7,7+6,1 US gal/min
Hydraulic oil tank capacity 300 l/min 79,3 US gal
Undercarriage (not extendable crawler)
Chain class and pitch ** steel steel
Track shoe width 300 mm 11,8 in
Overall length 2475 mm 97,4 in
Overall width 1900 mm 74,8in
Traction force 45 kN 10116 lbf
Travelling speed 2,36 km/h 1,5 mi/h
Average ground pressure 0,071 MPa 0,7 bar* Electrical engine is available on request** Rubber track is available on request
8/7/2019 ERKE Group, Soilmec SM-8G Anchoring
9/12
TRANSPORT DATA
Mass & Transport
Transport width 1900 mm 74,8 in
Transport height 2345 mm 92,3 in
Transport length 6020 mm 237 in
Transport weight 8350 kg 18408 lb
8/7/2019 ERKE Group, Soilmec SM-8G Anchoring
10/12
SM3 * SM5 * SM5G * SM8 * SM8G * SM8GT *
Weight Weight Weight Weight Weight WeightOperating weight: 3,5t
+2,5 t
Operating weight: 5,6 t Operating weight: 5,5 t Operating weight: 8,5 t Operating weight: 8,3 t Operating weight: 9 t
Rotary Rotary Rotary Rotary Rotary Double Rotary
Max torque: up to 2000
daNm
Max torque: 972 daNm Max rpm: 862 @ 696
daNm
Max torque: 1024 daNm Max rpm: 822 @ 51
daNm
Max torque: 1663 daNm
Max torque: 816 daNm
Crowd system Crowd system Crowd system Crowd system Crowd system Crowd system
Hoist force: 40 kN Hoist force: 40 kN Hoist force: 60 kN Hoist force: 60 kN Hoist force: 100 kN Hoist force: 100 kN
Rotary stroke Rotary stroke Rotary stroke Rotary stroke Rotary stroke Rotary stroke
Max feed stroke: 2400
mm
Max feed stroke: 2400
mm
Max feed stroke: 3400
mm
Max feed stroke: 3800
mm
Max feed stroke: 3750
mm
Max feed stroke: 3750
mm
Clamp assembly Clamp assembly Clamp assembly Clamp assembly Clamp assembly Clamp assembly
Range: 50-220 mm Range: 50-220 mm Range: 50-220 mm Range: 60-260 mm Range: 60-260 mm Range: 60-260 mm
Engine Engine Engine Engine Engine Engine
Separeted diesel power
pack 85 kW
Deutz TCD2011-L04 W
diesel engine 72 kW
Deutz TCD2011-L04 W
diesel engine 72 kW
Deutz TCD2012-L04
diesel engine 85 kW
Deutz TCD2012-L04
diesel engine 85 kW
Deutz TCD2013-L04 2V
diesel engine 116 kW
Primary technology Primary technology Primary technology Primary technology Primary technology Primary technology
Micropiles - Anchorings Micropiles - Anchorings -
Tunnelling
Soil investigation -
Micropiles
Micropiles -
Anchorings
Soil investigation -
Micropiles
Geothermal - Double
rotary
Optional kit available Optional kit available Optional kit available Optional kit available Optional kit available Optional kit available
Jet grouting -
Soil investigation
Jet grouting - Soil investi-
gation -
Top Hammer
Jet grouting -
Top Hammer
Jet grouting - Soil investi-
gation -
Top Hammer
Jet grouting -
Top Hammer
SOILMEC MICRODRILLING RIGS
* by Puntel
8/7/2019 ERKE Group, Soilmec SM-8G Anchoring
11/12
SM14 SM16G * SM16GT * SM20 * SM21 SM30
Weight Weight Weight Weight Weight WeightOperating weight: 14 t Operating weight: 16 t Operating weight: 17 t Operating weight: 21 t Operating weight: 22 Operating weight: 33
Rotary Rotary Rotary Rotary Rotary Rotary
Max torque: 1750 daNm Max rpm: 1000 @ 109
daNm
Max torque: 3200 daNm
Max torque: 1100 daNm
Max torque: 2160 daNm Max torque: 3650 daNm Max torque: 3650 daNm
Crowd system Crowd system Crowd system Crowd system Crowd system Crowd system
Hoist force: 89 kN Hoist force: 195 kN Hoist force: 195 kN Hoist force: 83 kN Hoist force: 141 kN Hoist force: 120 kN
Rotary stroke Rotary stroke Rotary stroke Rotary stroke Rotary stroke Rotary stroke
Max feed stroke: 7000
mm
Max feed stroke: 4000
mm
Max feed stroke: 4000
mm
Max feed stroke: 10200
mm
Max feed stroke: 10200
mm
Max feed stroke: 14200
mm
Clamp assembly Clamp assembly Clamp assembly Clamp assembly Clamp assembly Clamp assembly
Range: 60-415mm Range: 60-320 mm Range: 60-320 mm Range: 50-360 mm Range: 60-415mm Range: 60-415mm
Engine Engine Engine Engine Engine Engine
Cummins QSB 4.5
diesel engine 119 kW
Deutz TCD2013-L06 2V
diesel engine 176 kW
Deutz TCD2013-L06 2V
diesel engine 176 kW
Deutz TCD2012-L06
diesel engine 135 kW
Deutz TCD2013-L06 2V
diesel engine 176 kW
Cummins QSB 6.7
diesel engine 164 kW
Primary technology Primary technology Primary technology Primary technology Primary technology Primary technology
Micropiles -
Anchorings
Soil investigation -
Micropiles
Geothermal - Double
rotary
Micropiles -
Anchorings
Micropiles -
Anchorings
Jet grouting
Optional kit available Optional kit available Optional kit available Optional kit available Optional kit available Optional kit available
Jet grouting - Double
Rotary - Top Hammer -
Vibro rotary
Jet grouting -
Top Hammer
Vibro rotary Jet grouting - Double
Rotary - Top Hammer -
Vibro rotary
Jet grouting - Double
Rotary - Top Hammer
Micropiles -
Top hammer
SOILMEC MICRODRILLING RIGS
8/7/2019 ERKE Group, Soilmec SM-8G Anchoring
12/12
www.soilmec.it
Alltechnicaldataarepurelyindicativeandsubjecttochangewithoutnotice
10/2010-200-D/F-DigitalPrintRN-
IlDigitale
SOILMEC distributes machinery and structures all over the world, supported by SOILMEC subsidiary companies and dealers.
The complete Soilmec network list is available on the webpage www.soilmec.it