Upload
phungkhanh
View
217
Download
1
Embed Size (px)
Citation preview
The International Association for the Engineering Modelling, Analysis and Simulation Community
Principal Sponsor
3rd NAFEMS NORDIC Regional Conference:
neutral – interdisciplinary – independent
Engineering Simulation: Best Practices, New Developments, Future Trends
10 - 11 May 2016, Göteborg, Sweden
Conference agenda
Silver Sponsors
Room 1
Session 1 – Plenary Presentations
Welcome and NAFEMS IntroductionT. Morris, A. R. Oswald (NAFEMS)
Documentation of Structural Integrity for Marine Structures by Means of Non-linear FEMG. Solland (DNV GL, NOR)
Stochastic Finite Element Simulations of Real Life Frontal Crashes: With Emphasis on Chest Injury Mechanisms in Near-side Oblique Loading ConditionsJ. Iraeus (ÅF Industry / Umeå University, SWE); M. Lindquist (Umeå University, SWE)
Numerical Prediction of Glass Cartridge Robustness in Assembly Line Loading T. S. Hansen, B. U. Kristiansen (Novo Nordisk, DEN)
Lunch Break
Session 2 – Plenary Presentations
How Small (but fine) Simulations can also Radically Improve Industrial ProductsZ. Penzar, V. Schardt, C. Burgdorf (Continental, GER)
What About Quality?J. Ask (Volvo Car Corporation, SWE); M. Stallgård (FS Dynamics Sweden, SWE); O. Widlund (SP Technical Research Institute of Sweden, SWE)
Simulation for Certification of Aircraft Interior MonumentsV. Pilaka (Zodiac Aerospace, NED), J. Knourek, M. Kus (University of West Bohemia, CZE)
Principal Sponsor Presentation: The Next Step in the Evolution of SimulationP. Segaert (Siemens Industry Software, BEL)
Coffee Break
Room 1
Session 3 - Applications
Profile Selection of the Rear Underrun Protection Device (RUPD) with FEM Analyses and TopsisB. Yigit, S. Sagsöz (Anadolu Isuzu Automotive, TUR); K. Yay (Istanbul Technical University, TUR)
A Non-Linear Global-Local Analysis Using Super ElementsJ. Wind, L. Bräuner (Aarhus University, DEN)
On Dish Concentrator Engineering AnalysesR. Sjöqvist (Cleanergy, SWE)
Application of Finite Element Analysis (FEA) for Subsea Engineering in Technip NorgeZ. Gu (Technip Norge, NOR)
Room 2
Session 4 – CFD
FSI-Analysis on Vibrations of a Slender Rod Exposed to Axial Flow Calculations for Nuclear Power ApplicationsK. Bengtsson (Onsala Ingenjörsbyrå, SWE)
Computational Fluid Dynamics Simulations of Ships in High WavesD. Frisk, F. Carlsson, O. Dahlin (FS Dynamics, SWE)
Simultaneously Optimizing Vehicle Cooling Performance while Reducing Aerodynamic DragY. Dewan, M. Elmore, F. Ross (CD-adapco, USA); R. Averill (Red Cedar Technology, USA)
Investigation on the Injector Internal Flow During the Whole Transient Injection Process C. Gong, R. Baar (Technical University Berlin, GER)
Exhibition
Get together in the hardware and software exhibition
Agenda – Tuesday, 10 May
10:30
10:40
11:15
11:50
12:25
13:35
14:10
14:35
15:00
15:20
16:10
16:35
17:00
17:25
17:50
Preliminary agenda subject to alteration.
Room 1
Session 5 - Processes
Towards an Optimization Driven Concept Development Process in an Automotive ContextA. Govik (Volvo Car Corporation, SWE)
Simulation Driven Design – Structural Optimization as Design DriverL. Fredriksson (Altair Engineering, SWE)
Facilitating Design Innovation: Automation of Marine Crankshaft Design and Classification ApprovalS. Ribeiro-Ayeh (Dassault Systemes Deutschland, GER); A. Winkler (Dassault Systemes, SWE)
Coffee Break
Session 7 – Materials
Progressive Collapse Modelling of CompositesK. I. Edvardsen, G. Tørå (cDynamics, NOR)
A Study on FEA Modeling of Carbon/PEEK Lamina-ted Composites and Corresponding Material ModelsL. Coniglio (Parker Hannifin Manufacturing, BEL)
Composite Material Multi Objective Optimization of a Formula One Front WingS. Seitanis, D. Drougkas, G. Korbetis (BETA CAE Systems, GRE)
Lunch Break
Session 9 - Materials / Methods
Post-Processing Fluid and Particle Data, Perspectives from The Hot Mix Asphalt IndustryA. Hobbs (Astec, GBR); A. Holler (CEI, GER)
FEM/DEM Visualization and Simulation Data Management (SDM)O. Barrowclough, S. Briseid, H. E. I. Dahl, F. Fuchs, J. Hjelmervik, J. O. Nygaard (Sintef ICT, NOR); K. Bengtsson, J. Haenisch, O. Liestøl (Jotne EPM Technology, NOR)
The Effect of Height Restoration and Kyphoplasty Parameters on the Load Transfer Through the Lumbar SpineA. Tsouknidas, S. Chatzimoisiadis, E. Karatsis, N. Michailidis (BETA CAE Systems, GRE)
Coffee Break
Room 1
Session 11 - Misc
Water Tightness of Polyethylene Flange Joints - Finite Element Analysis and Full Scale ExperimentsJ. Sandström, J. Sällström (SP Technical Research Institute of Sweden, SWE)
An Ultra-Efficient Solver for Large-Scale Vibro-Acoustic System Simulation Through High-Order Adaptive Finite ElementsH. Beriot, P. Segaert (Siemens Industry Software, BEL)
NAFEMS EC Projects – Status and ApplicationsG. Duffett (NAFEMS)
Farewell
Room 2
Session 6 – Materials / Project
Atomic-Scale Computational Materials EngineeringM. Christensen1, X. Rozanska1, A. Mavromaras1, C. Freeman1, E. Wimmer1, P. Saxe1, A. France-Lanord1/2 (1Materials Design / 2Univ. Paris-Saclay, FRA/USA)
Simulation of the Laser Transmission Welding of Thermoplastics - Sensitivity to Process ParametersA. Majumdar, L. D´Alvise (Geonx, BEL)
SimBest Project: High Value Manufacturing Modelling and Simulation Best PracticeG. Duffett, T. Morris (NAFEMS)
Session 8 – Showcase Course: Nonlinear FEM
Showcase Course: Nonlinear FEMTutor: G. Duffett (NAFEMS)
Session 10 – The SimBest Project
Discussion Session: The SimBest Project – do the outcomes reflect
the whole simulation world?Moderated by G. Duffett (NAFEMS)
Agenda – Wednesday, 11 May
08:35
09:00
09:25
09:50
10:35
11:00
11:25
11:50
12:50
13:15
13:40
14:05
14:30
14:55
15:20
15:35 Preliminary agenda subject to alteration.
Hardware and Software Exhibition
Booth Company
05 BETA CAE Systems09 Ceetron 04 CEI - EnSight06 Dassault Simulia02 DYNAmore Nordic03 FS Dynamics10 GeonX08 Jotne07 NAFEMS01 Siemens / x-cim
10
Ceetron
09
06
Beta CAE Simulia
050403DYNA-more
FSDynamics
0201
Plenary Room
Hotel
08
Coffee Break
07
CEI
GeonX
Siemensx-cim
Jotne NAFEMS
Room 1Room 2
NAFEMS GmbH Osterham 23D-83233 Bernau, Germany
Tel. +49 (0) 80 51 – 96 59 3 49Fax +49 (0) 80 51 – 96 74 3 37e-mail: [email protected]
www.nafems.org
NAFEMSNAFEMS
SEE YOU IN STOCKHOLM 2017