Upload
lammien
View
228
Download
0
Embed Size (px)
Citation preview
EMS APX 7500
11/2/15 1
Feature PageZone/Modes-‐Names and Location 3,4,5
Turn On 6Parts and Controls,Volume 7
Accessing Preprogrammed Functions 8Menu and Navigation 9PTT and LED Indicators 10
Status Icons 11,12Intelligent Lighting 13
Alert Tones 14,15,16Select Zone/Channel 17
Receive and Respond to a call 18Make a Radio Call 19
Repeater or Direct Operation 20Monitoring 20
Conventional Mode Operation 21Scan and Scan Lists 22,23,24,25,26
Emergency Operation 27,28,29,30GPS 31,32,33,34,35,36,37,38
Failsoft/ Out of Range/Site Trunking 39Selecting a Radio Profile 40
Display Backlight, Digital PTT, Time-‐Out-‐Timer 41Accessing Radio Information 42,43
Radio Care 44
11/2/15 2
1 2 3 4 5 6 7 8VB FIRE/EMS HOSP/LG VB POLICE 1 VB POLICE 2 EM MGMT CHESAPEAKE NORFOLK CURRITUCKFIRE/EMS HOSP/LG POLICE 1 POLICE 2 DIG EM CHES NORFOLK CURR
1 EMS COMMAND 1 VA BEACH GEN 1 1ST DISP 1 INVEST 1 1 EM TAC 1-‐DIG 1 FIRE DISP 1 FIRE DISP 1 FIRE/EMS PRI2 FD COMMAND 2 INDEPENDENCE 2 2ND DISP 2 INVEST 2 2 EM TAC 2-‐DIG 2 FIRE TAC 2 2 FIRE TAC 2 2 FIRE/EMS SEC3 TAC 3 3 PRINCESS ANN 3 3RD DISP 3 INVEST TAC 3 EM TAC 3-‐DIG 3 FIRE TAC 3 3 FIRE TAC 3 3 FIRE TAC 14 TAC 4 4 N LEIGH 4 4TH DISP 4 -‐ 4 EM TAC 4-‐DIG 4 FIRE TAC 4 4 FIRE TAC 4 4 FIRE TAC 25 TAC 5 5 N SNGH 5 5TH DISP 5 -‐ 5 EM TAC 5-‐DIG 5 FIRE TAC 5 5 FIRE TAC 5 5 FIRE TAC 36 TAC 6 6 N CHKD 6 BEAT DISP 6 -‐ 6 EM TAC 6-‐DIG 6 FIRE TAC 6 6 FIRE TAC 6 6 -‐7 TAC 7 7 C CHESAPEAKE 7 1ST TAC 7 -‐ 7 EM TAC 1-‐ANA 7 FIRE TAC 7 7 FIRE TAC 7 7 -‐8 TAC 8 8 HOSP COORD 8 2ND TAC 8 AC 1 8 EM TAC 2-‐ANA 8 FIRE TAC 8 8 FIRE TAC 8 8 -‐9 TAC 9 9 RSLG 9 3RD TAC 9 AC 2 9 EM TAC 3-‐ANA 9 FIRE TAC 9 9 FIRE TAC 9 9 -‐10 TAC 10 10 SBLG 10 4TH TAC 10 -‐ 10 EM TC 4-‐ANA 10 FIRE TAC 10 10 FIRE TAC 10 10 -‐11 TAC 11 11 LG TAC1 11 5TH TAC 11 -‐ 11 EM TC 5-‐ANA 11 FIRE TAC 11 11 FIRE TAC 11 11 -‐12 TAC 12 12 LG TAC2 12 BEAT TAC 12 TRAF 1 12 EM TC 6-‐ANA 12 FD SPEC OPS 12 CHKD 12 -‐13 TAC 13 13 LG TAC3 13 MARINE 13 TRAF 2 13 EVENT 1 13 NIGHTINGALE 13 DEPAUL 13 -‐14 VDOT 14 MARINE MED 14 MUTUAL AID 14 TAC B14 14 EVENT 2 14 FD HAZMAT 14 NF LEIGH 14 -‐15 EMERG 15 15 EMERG 15 15 EMERG 15 15 EMERG 15 15 EMERG 15 15 CGH 15 SNGH 15 -‐16 FD/EMS TA 16 FD/EMS TA 16 VBPD TA 16 VBPD TA 16 FD/EMS TA 16 CFD TA 16 NFD TA 16 -‐
9 10 11 12 13 14 15 16PORTSMOUTH SUFFOLK NEWPORT NEWS HAMPTON ORION 1 ORION 2 ORION VB PD/FD BACKUPPORTS SUFF N NEWS HAMPTON ORION 1 ORION 2 OR VB PD/FD BU
1 FIRE DISP 1 FIRE DISP 1 FIRE DISP 1 FIRE DISP 1 IC1 1 AD1 1 VB POLICE 1 1 -‐2 FIRE 2 2 FIRE DISP 2 2 FIRE TAC 2 2 FIRE DISP 2 2 IC2 2 AD2 2 VB POLICE 2 2 -‐3 FIRE 3 3 FIRE 2 3 FIRE TAC 3 3 FIRE TAC 1 3 IC3 3 AD3 3 VB POLICE 3 3 -‐4 FIRE 4 4 FIRE 3 4 FIRE TAC 4 4 FIRE TAC 2 4 LO1 4 RPL1 4 VB FIRE 1 4 -‐5 FIRE 5 5 FIRE 4 5 FIRE TAC 5 5 FIRE TAC 3 5 LO2 5 RPL2 5 VB FIRE 2 5 -‐6 FIRE MA 6 FIRE 5 6 FIRE TAC 6 6 FIRE TAC 4 6 LO3 6 RFN1 6 VB FIRE 3 6 CH PD17 MARYVIEW 7 FD EMERG 7 FIRE OPS 7 7 FIRE TAC 5 7 OP1 7 RFN2 7 VB EM 7 CH PD28 -‐ 8 FIRE ADMIN 8 FIRE OPS 8 8 FIRE TAC 6 8 OP2 8 COV1 8 VB E1 8 CH FD19 -‐ 9 FIRE MA 9 FIRE OPS 9 9 FIRE TAC 7 9 OP3 9 COV2 9 VB E2 9 CH FD210 -‐ 10 FD AIR MA 10 FIRE OPS 10 10 FIRE TAC 8 10 OP4 10 COV3 10 VB SHERIF 1 10 CH FD311 -‐ 11 OBICI 11 FIRE OPS 11 11 CITY 1 11 OP5 11 COV4 11 VB SHERIF 2 11 -‐12 -‐ 12 BON 12 FIRE OPS 12 12 CITY 2 12 OP6 12 COV5 12 VB SHERIF 3 12 -‐13 -‐ 13 BELLE HBR 13 FIRE MA 13 EOC 13 OP7 13 -‐ 13 -‐ 13 -‐14 -‐ 14 -‐ 14 RVRSIDE HOS 14 PD/FD/HC 14 OP8 14 -‐ 14 -‐ 14 -‐15 -‐ 15 -‐ 15 MARY IM HOS 15 RIT EMER 15 OP9 15 -‐ 15 -‐ 15 -‐16 -‐ 16 -‐ 16 NNFD TA 16 CAREPLEX 16 OP10 16 -‐ 16 -‐ 16 -‐
11/2/15 3
17 18 19 20 21 22 23 24PD MUTUAL AID VB SHERIFF DIG SCHOOLS SCHOOLS PUBLIC WKS PUBLIC UTL MISC/GEN MISC/SERVM/AID SHERIFF SCHOOLS SCHOOLS PUB WRKS PUB UTL MIS/GEN MIS SER
1 NF PDMA 1 CC1 1 ADMIN 1 ADMIN 1 HIGHWAYS 1 PUOP 1 CTSEC1 1 HOUSE2 CH PDMA 1 2 CTAC1 2 CONSTR 2 CONSTR 2 HW TAC 1 2 PU CS 2 CTSEC2 2 PARKS3 CH PDMA 2 3 CC2 3 EVENTS 3 EVENTS 3 HW TAC 2 3 PU CSTC 3 CTSEC3 3 REC4 CH PDMA 3 4 CTAC2 4 MAINT 4 MAINT 4 TRAF OPS 4 PU OPSTC 4 MS SEC 4 PAV SEC5 PO PDMA 5 CC3 5 SECURE 5 SECURE 5 BEACH 5 SWR PTC 5 PARKS 5 PERMITS6 SU PDMA 6 CTAC3 6 CUSTDL 6 CUSTDL 6 TRAF ENG 6 SWR CTC 6 REC 6 INTAKE7 NN PDMA 7 CC4 7 SUPPLY 7 SUPPLY 7 WASTE 1 7 WTR TC 7 PAV SEC 7 EOC8 NN-‐D PDMA 8 CTAC4 8 TRANSP 8 TRANSP 8 WASTE 2 8 METER 8 PERMITS 8 VIDEO9 HA PDMA 1 9 INMATE 9 REG BUS 9 REG BUS 9 WASTE 3 9 PU TAC1 9 INTAKE 9 CTY MGR10 HA PDMA 2 10 MAINT 10 SP BUS 10 SP BUS 10 WASTE TAC 10 PU TAC2 10 GSMAIN 10 COMIT11 STATE PD 11 COURTS 11 CITY BUS 11 CITY BUS 11 CSTSVC 11 PU TAC3 11 CTY MGR 11 -‐12 STATE OPS 12 CIVIL 12 BUS 4 12 BUS 4 12 -‐ 12 PU TAC4 12 COMIT 12 -‐13 FED OPS 13 DARE 13 BUS 5 13 BUS 5 13 -‐ 13 HWYS 13 PARKING 13 -‐14 FT STORY 1 14 C OPS1 14 BUS 6 14 BUS 6 14 EOC 14 NF WTR 14 GARAGE 14 -‐15 FT STORY2 15 EMERG 15 15 GAR OPS 15 GAR OPS 15 EMERG 15 15 EMERG 15 15 EMERG 15 15 EMERG 1516 VB PDMA 16 C OPS2 16 VB SCH TA 16 VB SCH TA 16 VBPW TA 16 VBPW TA 16 VBPW TA 16 VBPW TA
25 26 27 28 29 30 31 32 33DIG GEN SERV GEN SERVICES CONVTN CTR JUV DETENTION 800 MUTUAL AID 700 MA 50-‐57 700 MA 70-‐77 700 FD/MED MA 700 LAW MAGEN SERV GEN SERV CONVCTR JUV DET 800 MA 7MA50-‐57 7MA70-‐77 7F/MEDMA 7LAW MA
1 GSMAIN 1 GSMAIN 1 SECURITY 1 JUV OPS 8CALL90 7CALL50 7CALL70 7FIRE63 7LAW612 LAND1 2 LAND1 2 EVENTS 1 2 JUV TAC 8CALL90D 7CALL50D 7CALL70D 7FIRE63D 7LAW61D3 LAND2 3 LAND2 3 EVENTS 2 3 JUV INT 8TAC91 7TAC51 7TAC71 7FIRE64 7LAW624 BLDG 4 BLDG 4 EVENTS 3 4 1ST DSP 8TAC91D 7TAC51D 7TAC71D 7FIRE64D 7LAW62D5 OCEAN 5 OCEAN 5 OPERATION 5 1ST TAC 8TAC92 7TAC52 7TAC72 7MED65 7LAW816 GSTAC1 6 GSTAC1 6 MAINT-‐GND 6 VB FCMD 8TAC92D 7TAC52D 7TAC72D 7MED65D 7LAW81D7 MS-‐SEC 7 MS SEC 7 FOOD SVC 7 VB ECMD 8TAC93 7TAC53 7TAC73 7MED66 7LAW828 MS OPS 8 MS OPS 8 EM TAC1 8 VB JUV TA 8TAC93D 7TAC53D 7TAC73D 7MED66D 7LAW82D9 MS EXHBT 9 MS EXBT 9 EM TAC2 9 EM TAC 1 8TAC94 7TAC54 7TAC74 7FIRE83 7MOB5910 PARKING 10 PARKING 10 EM TAC3 10 EM TAC 2 8TAC94D 7TAC54D 7TAC74D 7FIRE83D 7MOB59D11 GARAGE 11 GARAGE 11 EM TAC4 11 EM TAC 3 -‐ 7TAC55 7TAC75 7FIRE84 7MOB7912 -‐ 12 -‐ 12 EM TAC5 12 EM TAC 4 -‐ 7TAC55D 7TAC75D 7FIRE84D 7MOB79D13 -‐ 13 -‐ 13 EM TAC6 13 EM TAC 5 -‐ 7TAC56 7TAC76 7MED86 7DATA6914 EOC 14 EOC 14 VB PD TA 14 EM TAC 6 -‐ 7TAC56D 7TAC76D 7MED86D 7DATA69D15 EMERG 15 15 EMERG 15 15 EMERG 15 15 EMERG 15 -‐ 7GTAC57 7GTAC77 7MED87 7DATA8916 VB PWTA 16 VBPW TA 16 ALL CALL 16 VBPD TA -‐ 7GTAC57D 7GTAC77D 7MED87D 7DATA89D
11/2/15 4
34 35 36 37 38 39 40 41 42VHF MA 1 VHF MA 2 VHF FED MA 1 VHF FED LAW MARINE VHF 1 MARINE VHF 2 FIRE/EMS VHF CHES FD VHF WEATHERVHF MA 1 VHF MA 2 FED MA 1 FED LAW MARINE 1 MARINE 2 FD/EMS V CHES FDV WX-‐
VCALL10 VFIRE 21 HRN FIOP LE A CHANNEL 06 CHANNEL 82A VB FIRE CFD TAC 1 WX 1VTAC11 VFIRE 22 NC1 CALL LE 1 CHANNEL 08 CHANNEL 83A FIRE MA CFD TAC 1D WX 2VTAC12 VFIRE 23 IR 1 LE 2 CHANNEL 09 -‐ VB EMS CFD TAC 2 WX 3VTAC13 VFIRE 24 IR 2 LE 3 CHANNEL 10 -‐ EMS SW1 CFD TAC 2D WX 4VTAC17 VFIRE 25 IR 3 LE 4 CHANNEL 11 -‐ EMS SW2 CFD TAC 3 WX 5VTAC17D VFIRE 26 IR 4 LE 5 CHANNEL 13 -‐ HEAR CFD TAC 3D WX 6VTAC18 VMED 28 IR 5 LE 6 CHANNEL 14 -‐ NIGHTINGALE CFD TAC 4D WX 7VTAC18D VMED 29 IR 6 LE 7 CHANNEL 16 -‐ AC 2 AC CFD TAC 5D WX 8VTAC19 VLAW 31 IR 7 LE 8 CHANNEL 17 -‐ OCEANA TOWER -‐ WX 9VTAC19D VLAW 32 IR 8 LE 9 CHANNEL 21A -‐ -‐ -‐ -‐VTAC33 SAR NFM IR 9 -‐ CHANNEL 22A -‐ -‐ -‐ -‐VTAC34 -‐ -‐ -‐ CHANNEL 23A -‐ -‐ -‐ -‐VTAC35 -‐ -‐ -‐ CHANNEL 68 -‐ -‐ -‐ -‐VTAC36 -‐ -‐ -‐ CHANNEL 69 -‐ -‐ -‐ -‐VTAC37 -‐ -‐ -‐ CHANNEL 72 -‐ -‐ -‐ -‐VTAC38 -‐ -‐ -‐ CHANNEL 81A -‐ -‐ -‐ -‐
11/2/15 5
E
To turn off the radio, press the Power On/Off Button after the
Compatibility During Power Upates and updates the software and hardware of ad(s) during power up. Follow the procedure ur radio runs this task.
y shows MAINTENANCE MODE REMOTE DEVICE;llowed by other maintenance statuses.
y shows UPDATE DONE PLEASE RESET upon.
y shows UPDATE FAILED PLEASE RESET when it ate.
ower On/Off Button to reset. The radio runs ther up operation if the software updates are
uns the Maintenance Mode if the updates are not nd repeat step 1.
INCOMPLETE appears, use Flashport Recovery to update the control heads before you power on dio again.
6
Prep
arin
g Yo
ur R
adio
for U
se
nglish
Turning On the Radio
Press the Power On/Off Button briefly to power on the radio.
After a short time, the red, yellow and green LEDs light up. The display then shows Zone and channel text, and menu items display on the screen.
The backlight will turn on to the last selected dim level.
Note: Pressing the Power On/Off Button before the LED lights up will be ignored.
If FAIL ##/## appears in the display, the radio will not function until the condition has been corrected.
If ERROR ##/## appears, some non-critical data has been changed. If either of these displays appear, if the display goes blank, or if the unit appears to be locked up, see Helpful Tips on page 111 for more information.
If CH MISMATCH appears, means that either the Control Head has been connected to an incompatible transceiver, or vice versa.
LEDs light up.
ValidatingThe radio validyour control hebelow when yo
Procedure:
1 The displapromptly fo
2 The displacompletionORThe displafails to upd
3 Press the Pusual powecomplete.ORThe radio rcomplete a
Note: If SWTool the ra
Power On/Off Button
11/2/15
E
ing the Volume
he volume, lume Knob
the volume, lume Knob wise.
Volume Knob
able Settings or Utility Functionsges the display brightness.
– Switches one of two control heads to be active at
ts – Toggles horns and lights feature on or off.
– Toggles transmit power level between high and
uncement – Audibly indicates the current feature or Channel the user has just assigned.
– Toggles voice mute on or off for the channels enabled In-Call User Alert. When Voice Mute is adio remains muted to all conventional dispatch iliated trunking group calls.
7
Iden
tifyi
ng R
adio
Con
trol
s
nglish
Radio Parts and Controls
O5 Control Head and Microphone
1213
1615
14
Volume Knob
Dim Button
Home Button
Power On/Off Button
Indicators
Mode Knob
Orange Button*Push-to-Talk (PTT) Button
11
Navigation Button
LED Indicators
Menu Entries
Menu Select Button*
Accessory Port (Microphone)1
*These controls/buttons are programmable.
109
23
45
Adjust
To increase trotate the Voclockwise.
To decrease rotate the Vocounterclock
AssignDim – Chan
Front/Rear one time.
Horns/Ligh
Low Powerlow.
Voice Annomode, Zone
Voice Mutewhich have active, the rcalls and aff
11/2/15
Identifying Radio C
ontrols
English
Accessing the Preprogrammed Functions
ne of the
able buttons.
enu entries of
istrator for the
the following y appear as
low CHAN.
8
You can access various radio functions through ofollowing ways:
• A short or long press of the relevant programm
OR
• Use the Menu Select Button (g).
Using the Menu Select ButtonsThe Menu Select Buttons allow to access the mfeatures.
Note: Check with your dealer or system adminlist of features activated in your radio.
Your radio may be preprogrammed differently fromexample, but the steps for selecting a channel mashown below:
• Press the Menu Select button (g) directly be
Menu Select Button
11/2/15
E
Navigation Buttons
tton returns you to the home (default) display. In most he current mode.
dio features, the H button is also used to save dio settings or information before returning you to en.
features do not require you to press H to go to en. Refer to the individual feature sections in
r further details on saving user-edited radio rmation.
avigation Buttonn to scroll up, down, left or right.
lease one of the button to scroll from one entry to Press and hold one of the button to have the radio gh the list automatically (release the button to
nob me Knob to adjust the volume of the speakers by kwise or counterclockwise.ob e Knob to scroll through the channels by turning it
counterclockwise.9
Iden
tifyi
ng R
adio
Con
trol
s
nglish
Using the Advance Programmable ButtonsThis feature is to help you to shorten the process of applying certain common features.
* These programmable buttons support the One Touch Buttonfeature.
(Quick Access) One Touch Button – Enters a menu with a short press on the preprogrammed One Touch button. Features assigned to these buttons are Call, Call Alert, Phone, Repeater Access, MDC RTT Button Access, Status and Message.
Using the
Home BuThe H button cases, this is t
For selected rauser-edited rathe Home scre
Note: Somethe Home screthis manual fosettings or info
Data Feature Button Use this button to access data-related features, such as the Text Messaging Service (TMS) feature screen.
Menu Select Button*
Orange Button*
4-Way NUse this butto
Press and rethe next one.toggles throustop).
Volume KUse this Voluturning it cloc
Mode KnUse this Mod
clockwise or
11/2/15
E
LED Indicator
ator shows the operational status of your radio.
– Radio is transmitting.
linking red – Radio has failed the self test upon up or encountered a fatal error.
ow – Channel is busy.
ellow – Radio is receiving a secured transmission.
en – Radio is powering up, or is on a non-priority hile in the Scan List Programming mode.
reen – Radio is receiving an individual or telephone n a Priority-Two channel while in the Scan List ing mode.
linking green – Radio is on a Priority-One channel e Scan List Programming mode.
Red LED
Yellow LED
Green LED
10
Iden
tifyi
ng S
tatu
s In
dica
tors
nglish
Push-To-Talk (PTT) Button
The PTT button on the side of the microphone serves two basic purposes:
• While a call is in progress, thePTT button allows the radio totransmit to other radios in thecall.
Press and hold down PTTbutton to talk. Release the PTTbutton to listen.
The microphone is activatedwhen the PTT button is pressed.
• While a call is not in progress, the PTT button is used to makea new call. See Making a Radio Call on page 32 for moreinformation.
PTT Button
LED indic
Solid red
Rapidly bpowering
Solid yell
Blinking y
Solid grechannel w
Blinking gcall, or is oProgramm
Rapidly bwhile in th
11/2/15
Identifying Status Indicators
English
Monitor (Carrier Squelch)Selected channel is being monitored (during conventional operation only).
In-Call User Alert
• On = The feature is enabled. Voice muting ofthe affiliated trunking talkgroup or selectedconventional channel is activated.
• Off = The feature is disabled. Voice muting ofthe affiliated trunking talkgroup or selectedconventional channel is deactivated.
Power Level
• L = Radio is set at Low power.
• H = Radio is set at High power.
ScanRadio is scanning a scan list.
Priority Channel Scan
• Blinking dot = Radio detects activity onchannel designated asPriority-One.
• Steady dot = Radio detects activity on channeldesignated as Priority-Two.
11
Status Icons
The liquid crystal display (LCD) of your radio shows the radio status, text entries, and menu entries.
The following are the icons that appear on the radio’s display.
ReceivingRadio is receiving a call or data.
TransmittingRadio is transmitting a call or data.
Received Signal Strength Indicator (RSSI)The number of bars displayed represents the received signal strength for the current site, for trunking only. The more stripes in the icon, the stronger the signal.
Direct
• On = Radio is currently configured for directradio-to-radio communication (duringconventional operation only).
• Off = Radio is connected with other radiosthrough a repeater.
u
t
V
N
M
K
H or .
i
j
11/2/15
E
User Login Indicator (IP Packet Data)
• On = User is currently associated with theradio.
• Off = User is currently not associated with theradio.
• Blinking = Device registration or userregistration with the server failed due to aninvalid username or pin.
Data ActivityData activity is present.
HexadecimalIndicates that the text entry is currently in hexadecimal mode.
12
Iden
tifyi
ng S
tatu
s In
dica
tors
nglish
Vote Scan EnabledThe vote scan feature is enabled.
Secure Operation
• On = Secure operation.
• Off = Clear operation.
• Blinking = Receiving an encrypted voice call.
AES Secure Operation
• On = AES Secure operation.
• Off = Clear operation.
• Blinking = Receiving an encrypted voice call.
Location Signal
• On = Location feature is enabled, and locationsignal is available.
• Off = Location feature is disabled.
• Blinking = Location feature is enabled, but nolocation signal is available.
k
m
l
G
n
o{
11/2/15
E
background color to help signal that a radio event
When
ergency alarm or call.
ergency alarm or call.
.
ode.
tablish a full connection with the system.
thenticate or register with the system.
ate call.
ne call.
alert.
ctive call.
13
Iden
tifyi
ng S
tatu
s In
dica
tors
nglish
Intelligent Lighting Indicators
This feature temporary changes the radio’s display backlight color and the alert text has occurred.
Note: This feature must be preprogrammed by a qualified radio technician.
Backlight Event
Orange Emergency AlertsThe radio initiates an em
The radio receives an em
Red Critical Alerts
The radio is out of range
The radio enters failsoft m
The radio is unable to es
The radio is unable to au
Green Call Alerts
The radio receives a priv
The radio receives a pho
The radio receives a call
The radio receives a sele
11/2/15
Identifying Status Indicators
English
you of your radio’s conditions. The following table
Heard
self test.
t is made.
acknowledgment.
call for greater than 6 seconds without any activity.
expired.
transmissions are not allowed.
the radio is out of range of the system.
grammed channel.
user actions occur during a preprogrammed length
14
Alert Tones
An alert tone is a sound or group of sounds. Your radio uses alert tones to inform lists these tones and when they occur.
You Hear Tone Name
Short, Low-Pitched
Tone
Radio Self Test Fail When radio fails its power-up
Reject When an unauthorized reques
Time-Out Timer Warning Four seconds before time out.
No ACK Received When radio fails to receive an
Individual Call Warning Tone When radio is in an individual
Long, Low-Pitched
Tone
Time-Out Timer Timed Out When the Time-Out Timer has
Talk Prohibit/PTT Inhibit (When PTT button is pressed)
Out of Range (When PTT button is pressed)
Invalid Mode When radio is on an unprepro
Auto Power Off Powers off the radio when no of time.
A Group of Low-Pitched
TonesBusy When system is busy.
11/2/15
E
self test.
munication.
el is received.
tate.
ived a request from a radio.
uiet channel.
te.
from previous request.
erifying system accepting transmissions.
ost.
or reprogram request ACK is received.
received.
e target radio.
tem fails.
Heard
15
Iden
tifyi
ng S
tatu
s In
dica
tors
nglish
Short,Medium-Pitched
Tone
Valid Key-Press When correct key is pressed.
Radio Self Test Pass When radio passes its power-up
Clear Voice At beginning of a non-coded com
Priority Channel Received When activity on a priority chann
Emergency Alarm Entry When entering the emergency s
Central Echo When central controller has rece
Long, Medium-Pitched
Tone
Volume Set When volume is changed on a q
Emergency Exit When exiting the emergency sta
A Group ofMedium-Pitched
Tones
Failsoft When the trunking system fails.
Automatic Call Back When voice channel is available
Talk Permit (When PTT button is pressed) v
Keyfail When encryption key has been l
Console Acknowledge When status, emergency alarm,
Received Individual Call When Call Alert or Private Call is
Call Alert Sent When Call Alert is received by th
Site Trunking When a SmartZone trunking sys
You Hear Tone Name
11/2/15
Identifying Status Indicators
English
target of Private Call.
ate Call to answer the call.
call is received.
sed) a dynamic ID has been received.
ived.
ceived.
Heard
16
Ringing
Fast Ringing When system is searching for
Enhanced Call Sent When waiting for target of Priv
Phone Call Received When a land-to-mobile phone
Gurgle Dynamic Regrouping (When the PTT button is pres
Unique, Low-Pitched
ChirpNew Message When a new message is rece
Unique, High-Pitched
ChirpPriority Status When a priority message is re
You Hear Tone Name
11/2/15
E
ing a Radio Channel
a group of radio characteristics, such as transmit/ency pairs.
wing procedure to select a channel.
ode knob until the display shows the desired
d hold > to scroll to CHAN and press the Menu utton directly below CHAN. The display shows the one and channel.
e Mode knob to the desired channel.
or the PTT button to confirm the channel.
T button to transmit on the displayed zone
17
Gen
eral
Rad
io O
pera
tion
nglish
Selecting a Zone
A zone is a group of channels.
Note: Your radio must be preprogrammed to allow you to use these features.
Procedure:
1 > or < to ZONE.
2 Press the Menu Select button directly below ZONE. Thedisplay shows the current zone and channel.
3 > or < button until the desired zone is displayed.
4 Press H or the PTT button to confirm the selected zonenumber.
5 Press the PTT button to begin transmitting on the displayedzone channel.
Select
A channel isreceive frequ
Use the follo
Procedure:
Rotate the Mchannel.
OR
1 Press anSelect bcurrent z
2 Rotate th
3 Press H
Press the PTchannel.
11/2/15
General R
adio Operation
English
Onccan
Youwill tranindimod
If thblin
and Responding to a Talkgroup Calll from a group of users, your radio must be art of that talkgroup.
ve a talkgroup call (while on the Home screen), ow your radio is preprogrammed:
ventional Only:hts up solid yellow. The display shows the ias or ID, and the caller alias or ID.
nly:shows the caller alias or ID.
rophone verticallylllly 22 h i chesc es o 5o 5ttotouth.
TT button to respond to the call. The LED lights.
PTT button to listen.
alkgroup Call on page 32 for details on making l.
18
Receiving and Responding to a Radio Call
e you have selected the required channel and/or zone, you proceed to receive and respond to calls.
will see solid red LED while the radio is transmitting. You see solid yellow LED when the radio is receiving a smission in conventional mode and there is no LED cation when the radio receives a transmission in trunking e.
e radio is receiveing a secure transmission, the yellow LED ks.
Red LED
Yellow LED
Green LED
ReceivingTo receive a calconfigured as p
Procedure:
When you receidepending on h
1 ASTRO ConThe LED ligtalkgroup alORTrunking OThe display
2 Hold the micfrom your m
3 Press the Pup solid red
4 Release the
See Making a Ta Talkgroup Cal
11/2/15
E
Talkgroup Calll to a group of users, your radio must be part of that talkgroup.
GRP and press the Menu Select button directlyP.
y shows the last-selected talkgroup. enu Select button directly below SEL.
Mode Knob to select the channel with the kgroup.
icrophone vertically 1 to 2 inches (2.5 to 5.0 cm)outh.
TT button to make the call.
nventional Only:ghts up solid red. The display shows the lias or ID.
nly:ghts up solid red.
rly into the microphone.
e PTT button to listen.
19
Gen
eral
Rad
io O
pera
tion
nglish
Making a Radio Call
You can select a zone, channel, subscriber ID, or talkgroup by using:
• The preprogrammed Zone menu
• The Mode Knob
• A preprogrammed One Touch button
• The Contacts list (see Contacts on page 45).
Note: If the feature inactivity timer is enabled, your radioautomatically exits the feature when your radio is left idle long enough for the time to expire. You will hear the Menu Inactive Exit Tone upon feature exit.
Making aTo make a calconfigured as
Procedure:
1 > or < to Tbelow TGRThe displaPress the MORRotate thedesired tal
2 Hold the mfrom your m
3 Press the P
4 ASTRO CoThe LED litalkgroup aORTrunking OThe LED li
5 Speak clea
6 Release th
11/2/15
General R
adio Operation
English
oring Features
ho switch from analog to digital radios often assume that tic on a digital channel is an indication that the radio is roperly. This is not the case.
logy quiets the transmission by removing the he signal and allowing only the clear voice or data be heard.
nnel to ensure the channel is clear before transmitting.
ing a Channel
hone off hook.
l Modes Only:
activity on that channel. Volume knob if necessary.
r no activity, press and hold the PTT button to startrsation.
des Only: 1 T button.
ar two, short, high-pitched tones, or if you hear no toneicator lights steadily, then proceed with your message. the PTT button to receive (listen).
in the range of the system, you may hear a continuous ne and the display shows OUT OF RANGE .
20
Repeater or Direct Operation
The REPEATER operation increases the radio’s range by connecting with other radios through a repeater. The transmit and receive frequencies are different.
The DIRECT or “talkaround operation” allows you to bypass the repeater and connect directly to another radio. The transmit and receive frequencies are the same.
Procedure: Press the preprogrammed Repeater/Direct switch to toggle between talkaround and repeater modes. OR Follow the procedure below.
1 > or < to DIR.
2 Press the Menu Select button directly below DIR.
3 The display shows REPEATER MODE if the radio is currentlyin Repeater mode.ORThe display shows DIRECT MODE and the Talkaround icon if the radio is currently in Direct mode (during conventional operation only).
You can repeat step 2 to toggle between the two modes. Once in Direct Mode, press PTT button to start conversation with the radios nearby.
Monit
Radio users wthe lack of stanot working p
Digital techno“noise” from tinformation to
Monitor a cha
MonitorProcedure:
Lift the microp
Conventiona
1 Listen for 2 Adjust the
3 If you heayour conve
OR
Trunked MoPress the PT
2 If you heand the t ind3 Release
If you are notlow-pitched to
11/2/15
E
Conventional Mode Operationting a Talkgroupre:
to TGRP.
the Menu Select button directly below TGRP. They shows the last talkgroup that was selected and .
to PSET for the preset preprogrammed talkgroup.
to the required talkgroup.
e keypad to enter the number of the correspondingoup in the list.
the Menu Select button directly below SEL to saverrently selected talkgroup and return to the Home n.
encryption key associated to the new talkgroup isd, a momentary key fail tone sounds and the display KEY FAIL.
encryption key that is associated to the new talkgroup allowed, a momentary key fail tone sounds and the y shows ILLEGAL KEY.
H or the PTT button to exit.
21
Gen
eral
Rad
io O
pera
tion
nglish
This feature allows you to monitor channel traffic on conventional channels by defeating the coded squelch. Thus you can to listen to another user active on the channel. This way, you may be prevented from talking over someone else’s conversation.
Note: This feature must first be enabled by a qualified radio technician or system administrator.
Procedure:
Take the control head off hook. (This is the same as monitor on. You hear all channel traffic.)
OR
1 At Home mode where the default zone and channel arebeing displayed, > or < button to MON.
2 Press the Menu Select button directly below MONmomentarily to activate monitoring. The display shows MONITOR ON.
3 Press the Menu Select button to deactivate the monitoring.The display shows MONITOR OFF.
MONITOR ON shown on the display indicates that the radio is monitoring. Pressing the Menu Select button again turns monitor off and you don’t hear all channel traffic. If you try to transmit on a receive-only channel, you hear an invalid tone until you release the PTT button.
SelecProcedu
1 > or <
2 Pressdisplastored
3 > or <OR> or <ORUse thtalkgr
4 Pressthe cuscree
5 If the eraseshowsORIf the is not displa
6 Press
11/2/15
Advanced Features
English
the Scan List lets you change scan list members and priorities.
SCNL.
e Menu Select button directly below SCNL. Thehows the lists that can be changed.
the entry you want to edit.
e Menu Select button directly below SEL to addhange the priority of the currently displayed channel an list.
e Menu Select button directly below DEL to delete ntly displayed channel from the scan list.
e Menu Select button directly below RCL to view member of the scan list.
select more channels to be added or deleted.
keypad to go directly to additional channels to be r deleted.
Mode Knob to select additional channels to be r deleted.
22
Scan Lists
Scan lists are created and assigned to individual channels/groups. Your radio scans for voice activity by cycling through the channel/group sequence specified in the scan list for the current channel/group.
Your radio supports different types of Scan Lists:
• Trunking Priority Monitor Scan List
• Conventional Scan List
• Talkgroup Scan List
A maximum of 200 Scan Lists can be programmed in yourradio. These lists must be preprogrammed by a qualified radiotechnician.
Viewing a Scan ListProcedure:
1 > or < to SCNL.
2 Press the Menu Select button directly below SCNL.
3 > or < to view the members on the list.
4 Press the H to exit the current display and return to theHome screen.
EditingThis feature
Procedure:
1 > or < to
2 Press thdisplay s
3 > or < to
4 Press thand/or cin the scORPress ththe curreORPress ththe next
5 > or < toORUse the added oORUse the added o
11/2/15
E
6 Press H to exit scan list programming and return to the 5 Press H to exit scan list programming and return to theen.
nd Changing the Priority Status
SEL, DEL, and RCL screen, press the Menu ton directly below SEL to view and/or change the tus of the currently displayed channel.
SEL, DEL, and RCL screen, press the button or enu Select button directly below SEL, one or
to view and/or change the scan list status icon of ly displayed channel.
n indicates that the current channel is in the scann-priority channel. The LED lights up solid green.
wo Channel Scan icon indicates that the current in the scan list as the Priority-Two channel. The green.
ne Channel Scan icon indicates that the current in the scan list as the Priority-One channel. The y blinks green. You hear all traffic on the Priority-el, regardless of traffic on non-priority channels.
icates that the current channel is deleted from t.
23
Adv
ance
d Fe
atur
es
nglish
Home screen.
See Viewing and Changing the Priority Status on page 52 for more information on how to add and/or change the priority of the currently displayed channel in the scan list.
Changing the Scan List StatusProcedure:
1 Long press the preprogrammed Scan side button.
2 > or < to the member you want to edit.
3 Press the button or press the Menu Select buttondirectly below SEL once to add the currently displayed channel to the scan list.ORPress the button or press the Menu Select button directly below SEL, one or more times to change the scan list status icon of the currently displayed channel.
4 > or < to select more list members whose scan status youwant to change.ORUse the keypad to go directly to that scan list member.ORUse the Mode Knob to select another scan list member.
Home scre
Viewing aProcedure:
1 Below the Select butpriority staOR Below the press the Mmore timesthe current
2 A Scan icolist as a noORA Priority-Tchannel is LED blinksORA Priority-Ochannel is LED rapidlOne channORNo icon indthe scan lis
11/2/15
Advanced Features
English
Scan On While Disregarding the Squelchonventional Channels Only)
MON.
e Menu Select button directly below MON.
f MONITOR ON display indicates that the radio isding the squelch code.
ing for activity, you can still receive fleetwide, , dynamic regrouping, incoming telephone
t and Private Conversation/Call Alert calls.
these types of calls as you would normally on the nnel. However, when scanning different channels
group scan, incoming Private Conversation/Call ay be missed.
itting While the Scan is On
rogrammed for Talkback Scan
e PTT button to transmit on the channel indicatedisplay.
24
Scan
This feature allows you to monitor traffic on different channels by scanning a preprogrammed list of channels.
Turning Scan On or OffProcedure: Press the preprogrammed Scan button. OR Follow the procedure below.
1 > or < to SCAN.
2 Press the Menu Select button directly below SCAN.
3 The display shows SCAN OFF if scan is disabled. Press theMenu Select button directly below SCAN to enable scan.ORThe display shows SCAN ON and the scan status icon if scan is enabled. Press the Menu Select button directly below SCAN to disable scan.
4 The radio returns to the Home screen.
TurningCode (C
Procedure:
1 > or < to
2 Press th
3 The briedisregar
While scannsystem-wideinterconnec
Respond toselected chawhile in talkAlert calls m
Transm
Radio PProcedure:
1 Press thby the d
11/2/15
E
The radio does not begin scanning again for a predetermined a Nuisance Channelntinually generates unwanted calls or noise
sance” channel), you can temporarily remove the nnel from the scan list.
does not apply to priority channels or the nsmit channel.
radio is locked onto the channel to be deleted,UIS.
enu Select button directly below NUIS.
a Nuisance Channel
deleted nuisance channel, do one of the
ff, then on.
des.
radio, and then turn it back on.
e delete can be disabled by the system
25
Adv
ance
d Fe
atur
es
nglish
hang time after you release the PTT button, allowing the other party to respond. If the other party responds within the hang time, scanning does not resume until the full hang time expires after they have finished speaking, allowing the conversation to be completed.
To transmit on the selected channel if another channel is active, first turn scan off by pressing the Menu Select button below SCAN momentarily.
Radio Programmed for Non-Talkback ScanProcedure:
1 Press the PTT button at any time to transmit on the selectedchannel or fixed channel.
To make a Call Alert page, or Private Conversation call while scanning, press either the Menu Select button directly below PAGE or CALL. The call is entered on the selected channel and scanning is halted until the call is exited by pressing H or pressing the Menu Select button below either PAGE or CALL.
Deleting If a channel co(termed a “nuiunwanted cha
This capabilitydesignated tra
Procedure:
1 When the > or < to N
2 Press the M
RestoringProcedure:
To restore thefollowing:
• Turn scan oOR
• Change moOR
• Turn off the
Nuisance modadministrator.
11/2/15
Advanced Features
English
ng Priorities in a Scan List
e original channel priorities in a scan list, do one of :
off, then on.
hannels.
e radio, and then turn it back on.
p Box (HUB)ily suspend Scan Mode operation, remove the from the Hang Up Box (HUB). You are allowed to rol head while scan is suspended. However, Priority nning is not suspended. This feature applies to all nd Scan Types. Scan is resumed once the control rned to the holding clip and the preprogrammed as elapsed.
ority Scan List members are continuously scanned ly when the Scan List, Designated Tx Member field et to “Talkback” in the radio programming. erwise, all scan mode operation is suspended.
26
Changing Priorities Status While Scan is OnWhile the radio is scanning, the dynamic priority change feature allows you to temporarily change any channel in a scan list (except for the Priority-One channel) to the Priority-Two channel.
This change remains in effect until scan is turned off. Scan then reverts to the preprogrammed (original) setting.
Procedure:
1 Press the Menu Select button directly below DYNP tochange the priority of a non-priority channel in the scan list to Priority-Two.
2 Press H momentarily to exit the scan list and resumescanning.
RestoriProcedure:
To restore ththe following
• Turn scanOR
• Change cOR
• Turn off th
Hang UTo temporarcontrol headuse the contMember scaScan Lists ahead is retuhang time h
Note: Prionis sOth
11/2/15
E
situation.
emergency n over the
more
ssigned to rgency
hold the ut a
27
Adv
ance
d Fe
atur
es
nglish
Emergency Operation
The Emergency feature is used to indicate a critical
If the Orange button is preprogrammed to send an signal, this signal overrides any other communicatioselected channel.
Your radio supports 5 Emergency modes:
• Emergency Call
• Emergency Alarm
• Emergency Alarm with Call
• Silent Emergency Alarm
• Special Considerations for Emergencies
Check with your dealer or system administrator for information on the programming of this feature.
Only one of the Emergency modes above can be athe preprogrammed Emergency button or the Emefootswitch.
Note: To exit emergency at any time, press and preprogrammed Emergency button for abosecond.
11/2/15
Advanced Features
English
g an Emergency Call (Trunking Only)
eprogrammed Emergency button.
ounds and the display alternates EMERGENCY ande display.
ow-pitched tone sounds when the selected channel t support emergency.
microphone vertically 1 to 2 inches (2.0 to 2.5 cm)r mouth.
d hold the PTT button. Speak clearly into theone.
the PTT to end the transmission.
d hold the preprogrammed Emergency button untilounds to exit Emergency mode.
28
Sending an Emergency AlarmThis feature allows you to send a data transmission, which identifies the radio sending the emergency, to the dispatcher.
Procedure:
1 Press the preprogrammed Emergency button. A tonesounds and the display alternates EMERGENCY and the home display.
2 A dispatcher acknowledgment ACK RECEIVED displayfollows. AND, Trunking Only:A high-pitched tone indicates that the alarm has been received by the trunked system’s central controller.
3 Press and hold the emergency button or the PTT button toreturn to normal operation.
SendinProcedure:
1 Press pr
2 A tone sthe homORA short ldoes no
3 Hold thefrom you
4 Press anmicroph
5 Release
6 Press ana tone s
11/2/15
E
3 A high-pitched tone sounds, indicating that the alarm hasved by the trunked system’s central controller.er acknowledgment (four high-pitched tones) companied by an ACK RECEIVED display.
icrophone vertically 1 to 2 inches (2.0 to 2.5 cm)outh.
hold the PTT button. Speak clearly into thee.
e PTT to end the transmission.
hold the preprogrammed Emergency button untilnds to exit Emergency mode.
dio off also cancels the emergency state.
29
Adv
ance
d Fe
atur
es
nglish
Sending an Emergency Alarm with EmergencyCall
This feature gives your radio priority access on a channel for conventional system, and to a talkgroup for trunking system.
If the radio has both emergency call and alarm features enabled, it automatically proceeds to the call mode after the alarm is acknowledged.
Procedure:
1 Press the preprogrammed Emergency button to activatethe emergency call/alarm feature.
2 The display alternates EMERGENCY and the home display.
been receiA dispatchfollows, ac
4 Hold the mfrom your m
5 Press and microphon
6 Release th
7 Press and a tone sou
Turning the ra
11/2/15
Advanced Features
English
l that has.
eds and
mode NOnds untilrgency is
modeal)to be
30
Special Considerations for Emergencies
• If you press the emergency button while in a channeno emergency capability, a low-pitched tone sounds
• If the unit is out of the range of the system and/or themergency alarm is not acknowledged, a tone sounthe display shows NO ACKNOWLEDGE.
• If you press the emergency button, then change to athat has no emergency capability, the display showsEMERGENCY and a continuous low-pitched tone soua valid emergency mode is selected or until the emecancelled.
• When an emergency is active, changing to another where emergency is enabled (trunked or conventioncauses an emergency alarm and/or emergency call active on the new mode.
11/2/15
E
y other metal or concrete roof or structure
tall buildings or under dense tree-cover
ature extremes outside the operating limits of your
location information can be calculated in such t may take longer to do so, and your location y not be as accurate. Therefore, in any emergency
ways report your location to your dispatcher.
en where adequate signals from multiple satellites available, your GPS feature only provides an
proximate location, usually within 20 meters from ur actual location, but sometimes further away.
d that the accuracy of the location information and kes to obtain it varies depending upon es, particularly the ability to receive signals from an
umber of satellites.
e satellites used by the GPS feature are controlled the U.S. government and are subject to changes plemented in accordance with the Department of fense GPS user policy and the Federal Radio vigation Plan. These changes may affect the rformance of the GPS feature on your radio.
31
Adv
ance
d Fe
atur
es
nglish
The Global Positioning System (GPS)
This feature uses information from the Global Positioning System (GPS) satellites orbiting the Earth to determine the approximate geographical location of your radio, expressed as latitude and longitude. The availability and accuracy of this location information (and the amount of time that it takes to calculate it) varies depending on the environment in which you are using the GPS feature.
For example, GPS location fixes are very difficult to obtain indoors, in covered locations, between high buildings, or in situations where you have not established a clear broad view of the sky.
Understanding the GPS FeatureThe GPS technology uses radio signals from earth orbiting satellites, to establish the location co-ordinates, maximizing your view of clear unobstructed sky is essential for optimum performance.
Where adequate signals from multiple satellites are not available (usually because you cannot establish a view of a wide area of the sky), the GPS feature of your radio will not work. Such situations include but are not limited to:
• In underground locations
• Inside of buildings, trains, or other covered vehicles
• Under an
• Between
• In temperradio
Even wheresituations, iestimate masituation, al
Note: Evareapyo
Keep in minthe time it tacircumstancadequate n
Note: ThbyimDeNape
11/2/15
Advanced Features
English
Solocindsat
To not
• F
• Sn
Tha lorelaand
Youlocmeold
res four (4) preprogrammed waypoints. These ot be deleted.
ture inactivity timer is enabled, your radio ically exits the feature when your radio is left enough for the time to expire. You will hear u Inactive Exit Tone upon feature exit.
Waypoints Preprogrammed Waypoints
ble location ates.
Fixed location coordinates:
• Home
• Emergency
• Last Known Location
• Destination
editable, not inates.
The Home and Destination coordinates are editable.
n be deleted r all at once.
Coordinates cannot be deleted.
32
Enhancing GPS Performancemetimes, the GPS feature may be unable to complete a ation calculation successfully. You then see a message icating that your radio cannot connect to enough visible ellites.
maximize the ability of your radio to determine a fix, please e the following guidelines:
or your initial fix, hold the radio in the face position.
tay in the open. The GPS feature works best where there isothing between your radio and a large amount of open sky.
The Outdoor Location Feature (Using GPS)is feature allows you to determine your current location using cation menu, as well as your current distance and bearing in tion to another location. Radio location may be requested reported over-the-air.
r radio stores up to a maximum of sixty (60) programmable ation coordinates, also known as waypoints. When the mory is full, the next waypoints automatically replaces the est waypoints in the radio.
The radio also stocoordinates cann
Note: If the feaautomatidle longthe Men
Programmable
User-configuracoordin
Only the alias isthe coord
Coordinates caone at a time, o
11/2/15
E
Accessing the Outdoor Location FeatureOR
rocedure below to turn off the GPS (This feature is a qualified radio technician.):
o LOC.
e Menu Select button directly below LOC. Theshows PREVIOUS LOC <LATITUDE>.
o check the longitude, time and date of the lastful location fix.
e Menu Select button directly below OPTN.
o TURN OFF GPS (if preprogrammed).
e Menu Select button directly below SEL to turn off. The display shows LOCATION OFF.
e Menu Select button directly below EXIT to exitre and return to the main screen.
or the PTT button (if preprogrammed) to exit this
lso exits the menu if the emergency button is
33
Adv
ance
d Fe
atur
es
nglish
Note: An ON menu key may be present on the location menu if it is preprogrammed by the dealer or system administrator.
Procedure:
1 > or < to LOC.
2 Press the Menu Select button directly below LOC. Thedisplay shows LOCATION OFF <LATITUDE>.
3 Press the Menu Select button directly below ON to turn onthe GPS. The display shows PREVIOUS LOC <LATITUDE>.
4 > or < to check the longitude, time and date of the lastsuccessful location fix.
5 Press the Menu Select button directly below RFSH to obtaina new location fix.
6 The top line temporarily displays PLEASE WAIT while thenew location is being determined.While the new location is being determined, the location signal can be a solid or blinking icon.
7 Once the location coordinates are fixed, the display showsthe current latitude. Toggle to see the longitude, time and date.The location coordinates are updated automatically every five seconds while the location signal is present.
8 Press the Menu Select button directly below EXIT to exit
Follow the penabled by
1 > or < t
2 Press thdisplay
3 > or < tsuccess
4 Press th
5 > or < t
6 Press ththe GPS
7 Press ththe featuORPress Hmenu.
The radio apressed.
11/2/15
E
4 Press the Menu Select button directly below OK once you
y shows SAVED AS <WAYPOINT NAME>.
y shows SAVED AS HOME.
y shows SAVED AS DEST..
r the PTT button (if preprogrammed) to exit this
Saved Waypoint
rrent location display:
enu Select button directly below OPTN.
AYPOINTS.
enu Select button directly below SEL.
esired waypoint.
enu Select button directly below OPTN. Thews VIEW.
enu Select button directly below SEL.
in to view longitude, time and date the waypointed.
34
Adv
ance
d Fe
atur
es
nglish
Saving a WaypointProcedure:
While in the current location display:
1 Press the Menu Select button directly below OPTN.
2 > or < to SAVE AS WAYPT and press the Menu Select button directly below SEL. OR> or < to SAVE AS HOME and press the Menu Selectbutton directly below SEL and proceed to Step 5.OR> or < to SAVE AS DEST. and press the Menu Selectbutton directly below SEL and proceed to Step 5.
3 A blinking cursor appears in the screen. Use the keypad totype the alias via multi-tap. Press < to move one space to the left.
Press > to move one space to the right.Press the Menu Select button below DEL to delete any unwanted characters.Press * to add a space.Press 0 to toggle between mixed case mode, uppercase mode, and lowercase mode.Press # to toggle between numeric and letter mode.
are done.
5 The displaORThe displaORThe displa
6 Press H omenu.
Viewing aProcedure:
While in the cu
1 Press the M
2 > or < to W
3 Press the M
4 > or < to d
5 Press the Mdisplay sho
6 Press the M
7 > or < agawas detect
11/2/15
Advanced Features
English
the Alias of a Waypoint
current location display:
e Menu Select button directly below OPTN.
WAYPOINTS.
e Menu Select button directly below SEL.
desired waypoints.
e Menu Select button directly below OPTN.
EDIT NAME and press the Menu Select buttonelow SEL.
g cursor appears in the Edit Name screen.keypad to edit the alias. to move one space to the left.
to move one space to the right.e Menu Select button below DEL to delete any d characters.
to add a space. to toggle between mixed case mode, uppercase
nd lowercase mode. to toggle between numeric and letter mode.
e Menu Select button directly below OK once you.
35
8 Press the Menu Select button directly below BACK to returnto previous Waypoint screen.ORPress H or the PTT button (if preprogrammed) to exit this menu.
Editing Procedure:
While in the
1 Press th
2 > or < to
3 Press th
4 > or < to
5 Press th
6 > or < todirectly b
7 A blinkinUse the Press <Press >Press thunwantePress *Press 0mode, aPress #
8 Press thare doneOR
11/2/15
E
Press the Menu Select button directly below CNCL to return Press the Menu Select button below EDIT to change the ordinates.
cursor appears in the EDIT LOCATION screen. move one space to the left.
move one space to the right.enu Select button below Del to delete any
characters.
enu Select button directly below OK once you
enu Select button directly below CNCL to return ious screen.
enu Select button directly below OK once youith the new coordinates.
enu Select button directly below CNCL to return ious screen then skip to step 11.
y shows {HOME} UPDATED and the radio returnspoints main screen.
y shows {DESTINATION} UPDATED and the ns to the Waypoints main screen.
r the PTT button (if preprogrammed) to exit this
36
Adv
ance
d Fe
atur
es
nglish
to the Waypoints main screen.
9 The display shows <WAYPOINT NAME> UPDATED.
10 Press H or the PTT button (if preprogrammed) to exit thismenu.
Editing the Coordinates of a WaypointProcedure:
While in the current location display:
1 Press the Menu Select button directly below OPTN.
2 > or < to WAYPOINTS and press the Menu Select buttondirectly below SEL.
3 > or < to desired waypoints.
4 Press the Menu Select button directly below OPTN.
5 > or < to EDIT LOCATION and press the Menu Selectbutton directly below SEL.
6 The first number blinks.Press < to move to the previous number/coordinates.
Press > to move to the next number/coordinates.
Press U or D to change the North (N), South (S), East (E) or West (W) direction.
number/co
7 A blinking Press < to
Press > toPress the Munwanted
8 Press the Mare done.ORPress the Mto the prev
9 Press the Mare done wORPress the Mto the prev
10 The displato the WayORThe displaradio retur
11 Press H omenu.
11/2/15
Advanced Features
English
All Saved Waypoints
e Menu Select button directly below OPTN.
WAYPOINTS and press the Menu Select buttonelow SEL.
desired waypoints and press the Menu Selectirectly below OPTN.
DELETE ALL and press the Menu Select buttonelow SEL.
lay shows ALL SAVED WAYP CONFIRM DEL?.
e Menu Select button directly below YES to delete.lay shows ALL SAVED WAYP DELETED.
e Menu Select button directly below NO to return to Waypoint screen.
or the PTT button (if preprogrammed) to exit this
37
Deleting a Single Saved WaypointProcedure:
While in the current location display:
1 Press the Menu Select button directly below OPTN.
2 > or < to WAYPOINTS.
3 Press the Menu Select button directly below SEL.
4 > or < to desired waypoints.
5 Press the Menu Select button directly below OPTN.OR Press the Menu Select button directly below DEL and then skip to step 7.
6 > or < to DELETE and press the Menu Select button directlybelow SEL.
7 The display shows <WAYPOINT NAME> CONFIRM DEL?.
8 Press the Menu Select button directly below YES to delete.The display shows <WAYPOINT NAME> DELETED.ORPress the Menu Select button directly below NO to return to previous Waypoint screen.
9 Press H or the PTT button (if preprogrammed) to exit thismenu.
DeletingProcedure:
1 Press th
2 > or < todirectly b
3 > or < tobutton d
4 > or < todirectly b
5 The disp
6 Press thThe dispORPress thprevious
7 Press Hmenu.
11/2/15
E
Location Feature While in y Modergency feature is activated by pressing the
tton, the radio exits the Location menu and home (default) display so that you can see which
ergency signal is going out on.
may re-enter the Location menu while still in de, provided that Silent Emergency has not been
ned Location off using the ON/OFF menu key, it turns back on when Emergency is activated.
lid location signal during Emergency, the current e location information received is saved as d Last Known Location waypoints, respectively.
38
Adv
ance
d Fe
atur
es
nglish
Measuring the Distance and Bearing from a Saved Waypoint
Procedure:While in the current location display:
1 Press the Menu Select button directly below OPTN.
2 > or < to DIST FRM HERE and press the Menu Select buttondirectly below SEL.
3 > or < to the required waypoint, and press the Menu Selectbutton directly below SEL.
4 The display shows the distance and bearing from the currentto the selected coordinates.
5 Press the Menu Select button directly below BACK to returnto the previous Waypoint screen.ORPress H or the PTT button (if preprogrammed) to exit this menu.
Using theEmergenc
When the Emeemergency bureturns to the channel the em
However, you emergency moactivated.
If you have turautomatically
If there is a solocation and thEmergency an
11/2/15
Advanced Features
English
ut-of-RangeNGE when your radio goes out of the range of the n no longer lock onto a control channel.
tched tone sounds.
lay shows the currently selected zone/channel tion and OUT OF RANGE.
io remains in this out-of-range condition until:nto a control channel.
nto a failsoft channel.
ed off.
Trunking Featuretroller loses communication with any site, that ite trunking.
ows the currently selected zone/channel d SITE TRUNKING.
this occurs, you can communicate only with radios within your trunking site.
39
Using the Failsoft SystemThe failsoft system ensures continuous radio communications during a trunked system failure. If a trunking system fails completely, the radio goes into failsoft operation and automatically switches to its failsoft channel.
The failsoft condition is indicated by a faint beeping tone every nine seconds (radio unsquelched) until the trunking system returns to normal operation.
To continue, in Failsoft, to communicate with other talkgroups, refer to the following procedure.
Procedure:
1 Rotate the Mode Knob to change to a different repeaterfrequency.
2 Press the PTT button to talk, and release the button tolisten.
When the trunking system returns to normal operation, your radio automatically leaves failsoft operation and returns to trunked operation.
Going OOUT OF RAsystem, it ca
Procedure:
1 A low-piAND/ORThe dispcombina
2 Your radIt locks oORIt locks oOR It is turn
Using SiteIf the zone consite reverts to s
The display shcombination an
Note: Whenother
11/2/15
Advanced Features
English
Select button directly below EXIT to exit ut making any changes.
urns to the Home screen. The profile name on indicates the current selected radio profile.
ll through the menu selections.
nu Select button directly below SEL to selectadio profile.
40
ORPress the Menu the screen witho
5 The radio retthe Home screen
Selecting a Radio ProfileThis feature allows you to manually switch the visual and audio settings of the radio. The display, backlight, alert tones, and audio settings are defined according to the preprogrammed radio settings of each radio profile.
Please refer to a qualified technician for more information.
Note: If the feature inactivity timer is enabled, your radio automatically exits the feature when your radio is left idle long enough for the time to expire. You will hear the Menu Inactive Exit Tone upon feature exit.
Procedure: Use the preprogrammed Profile button and proceed to Step 3.ORFollow the procedure below.
1 > or < to PRFL.
2 Press the Menu Select button directly below PRFL toaccess the Profiles feature screen.
3 > or < to scro
4 Press the Methe required r
11/2/15
E
Time-Out Timerrns off your radio’s transmitter. You cannot r than the preset timer setting.
to do so, the radio automatically stops your and you hear a talk-prohibit tone.
faulted at 60 seconds, but it can be d from 3 to 120 seconds, in 15-second intervals, abled entirely for each radio mode, by a qualified n.
ill hear a brief, low-pitched, warning tone four nds before the transmission times out.
the PTT button longer than the preprogrammedear a short, low-pitched warning tone, the n is cut-off, and the LEDs goes out until you PTT button.
e PTT button. The LEDs relight and the timer
TT button to re-transmit. The time-out timerd the red LED lights up.
41
Adv
ance
d Fe
atur
es
nglish
Using theThis feature tutransmit longe
If you attempt transmission,
The timer is depreprogrammeor it can be disradio technicia
Note: You wseco
Procedure:
1 Hold downtime. You htransmissiorelease the
2 Release thresets.
3 Press the Prestarts an
Using the Digital PTT ID FeatureThis feature allows you to the radio ID (number) of the radio from whom you are currently receiving a transmission. This ID, consisting up to a maximum of eight characters, can be viewed by both the receiving radio and the dispatcher.
Your radio’s ID number is also automatically sent every time the PTT button is pressed. This is a per-channel feature. For digital voice transmissions, your radio’s ID is sent continuously during the voice message.
You can enable or disable the radio’s display backlight as needed, if poor light conditions make the display difficult to read.
Depending on how your radio is preprogrammed, you can also maintain a minimum backlight level on the radio’s display.
Procedure:
Note: Press the DIM button to toggle the backlight on or off.
ORPress any key of the keypad, the Menu Select or Menu Navigation buttons, or any programmable radio controls or buttons to turn the backlight on.
Controlling the Display Backlight
11/2/15
Advanced Features
English
Accessing General Radio Information at any time to return to the Home screen.
.
u Select button directly below INFO.
IO INFO and press the Menu Select button SEL.
ows the Information screen.
ll through the various information.
u Select button directly below BACK to return reen.
xit and return to the home display.
42
Your radio contains information on the following:• Radio Information
• IP Display
• Control Assignments
Note: If the feature inactivity timer is enabled, your radio
automatically exits the feature when your radio is left idle long
enough for the time to expire. You will hear the Menu Inactive Exit
Tone upon feature exit.Accessing Radio Information
This feature displays the following information of your radio:
Note: Press H
Procedure:
1 > or < to INFO
2 Press the Men
3 > or < to RAD
directly below
4 The display sh
• Host Version
• Secure Version
• DSP Version
• KG (Secure Algorithm)
• Serial Number
• MCHIB Version
• CHIB Version
• AUX CH Version
• Siren Version
• VRS Version
•
•
DVRS App Version (only whenDVRS is available)
DVRS CP Version (only whenDVRS is available)
• CH 1 – 4 Version(depending on the number ofchannels connected.)
• TIB Version
• TRC Version
• URC Version
• DVRS DSP Version (onlywhen DVRS is available)
• Model Number
• ESN
• Flash Code
• Tuning Version
• Serial Number
• Flash Size & Type
• RF Band
• Processor Version
5 > or < to scroORPress the Mento previous scORPress H to e
11/2/15
E
Viewing IP InformationViewing Control Assignments
plays the programmable radio functions controls of your radio for the currently selected
able Features on page 7 for more information rogrammable features of your radio.
FO.
enu Select button directly below INFO.
NTROL MAP and press the Menu Select buttonw SEL.
roll through the various information.
enu Select button directly below BACK to return
43
Adv
ance
d Fe
atur
es
nglish
This feature displays the device name, IP address, and status of your radio.
Note: The device name of your radio is preprogrammed. Check with your dealer or system administrator for more information.
Procedure:
Press the preprogrammed Info button and proceed to Step 3.ORFollow the procedure below.
1 > or < to INFO.
2 Press the Menu Select button directly below INFO.
3 > or < to IP INFO and press the Menu Select button directlybelow SEL.
4 > or < to scroll through the various information.ORPress the Menu Select button directly below BACK to return to previous screen. ORPress H to exit and return to the Home display.
This feature disassigned to thechannel.
See Programmon the various p
Procedure:
1 > or < to IN
2 Press the M
3 > or < to CO
directly belo
4 > or < to scORPress the M
11/2/15
E
g the External Plastic Surface
-water solution should be applied sparingly with a llic, short-bristled brush to work all loose dirt away .
ent, lint-free cloth or tissue should be used to lution and dry the radio.
t no water remains entrapped near the acks, or crevices.
Do not use solvents to clean your radio. Spiritsmay permanently damage the radio housing.
Do not submerge the radio in the detergentsolution.
44
Adv
ance
d Fe
atur
es
nglish
Cleaning the External Surface of the Radio
Procedure:
1 Combine one teaspoon of mild diswashing detergent to onegallon of water (0.5% solution).
2 Apply the solution sparingly with a stiff, non-metallic, short-bristled brush, making sure excess detergent does not get entrapped near the connectors, controls or crevices.
3 Dry the radio thoroughly with a soft, lint-free cloth.
Cleanin
The detergentstiff, non-metafrom the radio
A soft, absorbremove the so
Make sure thaconnectors, cr
•
•!
� � � � � � �
Caring for Your Radio
The following are suggestions to assist you in troubleshooting possible operating problems.
The cables that connect to the rear of the radio could have live voltage on some of their pins. Do not remove or reconnect these cables. Only a qualified radio technician should perform this task. Service performed by unauthorized personnel may cause the radio to transmit an emergency alarm even if the unit is turned off.
!� � � � � � �
11/2/15