Upload
gitme
View
81
Download
0
Embed Size (px)
DESCRIPTION
Elmo Camera 12v Power Supply Pin-out wiring diagram
Citation preview
8
5. CONNECTION
5. 1 Standard Connection
5. 2 Cautions on Connection
• When connecting the camera cables, be sure to turn off the camera and the other equipment connected.• We suggest using a C mount lens made for a 3CCD camera.
When using another lens, the best camera performance of this camera may not be obtained.(For example, low resolution may occur, focus may be lost through the range of a zoom lens, andflare, ghost or shading may occur)Furthermore, in order to avoid damaging the mounting portion of the camera head, use a lens whichhas projection dimension from the mounting base of less than 0.157"(4mm).
• For DC power supply connecting to DC IN 12V terminal, use UL listed and/or CSA approved ungroundingtype AC adaptor with the specifications described below.
Power supply voltage : DC12V±10%Current rating : More than 830 mA, Less than2.5ARipple voltage : Less than 50 mV(p–p)Connector : HR10A–7P–4S by HIROSE electronics Co. Ltd
Pins 1, 2 : 12VPins 3, 4 : GND
5. 3 Connector Pin Assignments
IK-TF5
DC IN 12V
RGBLens Camera cable
(option)
Image processingequipments, etc.DC power supply
Less than 4 mm
DC IN 12V RGB 1 +12V 12 +12V 23 GND 34 GND 4
56789101112131415
RGB
TXDGNDGNDGND
SYNC12VGNDRXDTRIG
HD IN/OUTVD IN/OUT
INDEX
1
2
3
412345
678910
1112131415