Activate Your Device

www.fleetsharp.com/getstarted Open a web browser and go to:

Follow the instructions for activating your device(s).

Create an account, or log in to your existing account.

StickerGoesHere

1

2

3

Here’s your device activation code:

If not already on file, you may be prompted for

your billing information.

Make sure the activation code in this guide matches the code on screen. Or,

if your activation code does not show up re-enter it and press continue.

Quick Start GuideELD

For more valuable information, please like us on Facebook and follow us on LinkedIn.

WE’RE CONFIDENT WE CAN MAKE IT RIGHT!If you have any questions or problems with your GPS

tracker, please give us a call before you make a return. FleetSharp Customer Support Phone: 1-877-899-2939

Email: support@fleetsharp.com

STOP

How are we doing? We'd love to know.We hope you will be pleased with your order and

the service you receive. We love to hear from customers about features they love, and ways we

can continue to improve your experience. Leave us a review where you made your purchase.

Thank you!

OBD DeviceJ-Bus Device

Your drivers will use ‘Driver ID’ to log in to the app.

Complete the form, then click ‘Save.’

C

E

Make sure to check the box to give Web Access to drivers.

Fill out the form, then click ‘Save.’

C

Set Up eFleetSuiteLogin to the ELD eFleetSuite login page. Sign in using the eFleetSuite credentials emailed to you.Please allow 2-3 business days for delivery.4Set up your home terminal(s).5

Set up your driver(s). Make sure you have the driver’s license number available.

6

Select ‘Home Terminals’ in the ‘ADMIN’ dropdown.

Select ‘Drivers’ in the ‘SETUP’ dropdown.

Click ‘New.’

A

B

A

Click ‘New.’B

The system will create a temporary password for the driver. See the Driver’s App Guide for details.

D

Want to learn more about the FleetSharp ELD system?

Visit the help pages in your ELD portal to sign up to attend one of

our informative webinars!

Get to Know the FleetSharp ELD SystemClick HOS or DVIR for a description of each log,

checklist, and report available.

Make your driver and date selections above, then click ‘View Logs’ to see Driver Logs.

Click here to add a new part to your driver’s inspection list.

Choose a part, then click here to add a new possible defect which your drivers need to inspect.

Codes will appear in parentheses following the part or defect.Your installation is complete!

Install Your DeviceYou will need your device, the cord, and thetablet. If you have ordered more than one tablet, you may choose any tablet that you have received, as these have not been paired yet. Begin with the ignition and the tablet powered off.

7

J-BUS Devices: Connect the cord to the device, then plug the device into the J-Bus port.

8

Turn on the ignition, and verify green and orange lights on the device.

9

Power on the tablet. The app will automatically start. The tablet will then recognize all devices within range. The device at the top of the list will be the one closest to you. Double checkby matching the serial number, then choose the device.

10

Per regulation, for the first 10 days the system may not display available hours on the tablet. The

system is still capturing information and generating logs,

which are available in the eFleetSuite portal.

OBD Devices: Connect the OBD extensioncord to the device, then plug the device into the OBDII port.

OBD devices only - A pop-up window will prompt you to input the current odometer reading of the vehicle.

11