EIS CD Install Solaris Patch(Vmware Lab)

# ls -altotal 4drwxr-xr-x 2 root nobody 512 Jan 4 11:44 .drwxr-xr-x 5 root root 512 Jan 18 18:39 ..# cd /cdrom# ls20040114_000414 cdrom0 eis-cd sol_9_905_x86_2# cd eis*### ls -altotal 293dr-xr-xr-x 2 root sys 2048 Dec 1 18:09 .drwxr-xr-x 5 root root 512 Jan 18 18:39 ..-r--r--r-- 1 root root 43098 Dec 1 18:09 .eis-cd1.md5dr-xr-xr-x 2 root root 2048 Nov 25 22:54 .verify-r--r--r-- 1 root root 2550 Nov 29 00:53 CONTENTS.txt-r--r--r-- 1 root root 2674 Jul 13 2000 COPYRIGHT-r--r--r-- 1 root root 1417 Jul 27 2001 DISCLAIMER.txt-r--r--r-- 1 root root 2476 Dec 1 02:08 README-29NOV05-r--r--r-- 1 root root 89296 Dec 1 01:10 history.txtdr-xr-xr-x 6 root root 2048 Sep 25 03:27 sun# ls -FCONTENTS.txt DISCLAIMER.txt history.txtCOPYRIGHT README-29NOV05 sun/# cd sun# lsinstall patch progs tools# cd install# lsbin local-bin profile-EIScopy-cd2sun.sh local-bin_x86 profile-rootcopy-dvd2sun.sh make-cd-images setup-standard.sh# ls -Fbin/ local-bin/ profile-EIScopy-cd2sun.sh* local-bin_x86/ profile-rootcopy-dvd2sun.sh* make-cd-images* setup-standard.sh*# ./setup*

Running setup-standard with EIS-CD Vn 29-NOV-05===============================================

Creating /var/sun for scripts, log files etc...Loading /opt/sun/bin...Setting up /.profile-EIS...

BEWARE: /.profile does NOT source /.profile-EISPLEASE: examine why this is not sourced!

Is the power saving daemon to be disabled? [y/n]: y/etc/power.conf has been modified.

Sun keyboard Power button to be disabled? [y/n]: y/usr/openwin/lib/speckeysd.map has been modified.

The buttons & dials have probably already been disabled....

Remote ROOT logins probably enabled: See /etc/default/login...

One or more SAN Foundation Suite Packages are not installed.

Installation of SAN Foundation Suite prevented via option!

*********************************************************** * There is a risk that the system will halt and enter * * the debugger (thus stopping operation) if a break * * signal is seen on the serial port and the system had * * been booted with kadb. * * This can happen when the device attached to the serial * * port (e.g. workstation or terminal) is powered on. * * This behaviour can be prevented by setting the * * Alternate Break Sequence in /etc/default/kbd. * ***********************************************************

Do you wish to ENABLE the alternate break sequence? [E/n]: E

Please note that the new break sequence is: ~ ^B (no spaces)(i.e. Carriage return, tilde, control-B)

Automated Core File Analysis Tool (ACT).....ACT Package is not installed - Version 8.10 available....

Do you want to install the ACT package? [y/n]: y

Processing package instance from

CS CTE Automated Crash Analysis tool (http://cpre-emea.uk/tools/act.html)(i386) 8.10 ACT

Copyright 2005 Sun Microsystems, Inc. All rights reserved.

enter base directory for install (Default /opt/CTEactx) [?,q]

Do you wish to enable the email of panic facility [y] [y,n,?] n

The selected base directory must exist beforeinstallation is attempted.

Do you want this directory created now [y,n,?,q] yUsing as the package base directory.## Processing package information.## Processing system information.## Verifying disk space requirements.## Checking for conflicts with packages already installed.## Checking for setuid/setgid programs.

This package contains scripts which will be executed with super-userpermission during the process of installing this package.

Do you want to continue with the installation of [y,n,?] y

Installing CS CTE Automated Crash Analysis tool (http://cpre-emea.uk/tools/act.html) as

## Installing part 1 of 1./opt/CTEactx/man/man1/act.1/opt/CTEactx/scripts/ACT_dumpscript[ verifying class ]/opt/CTEactx/bin/5.9/act[ verifying class ]## Executing postinstall script.Creating symbolic link for ACTInstalling ACT_dumpscript in /etc/init.dInstalling Link in /etc/rc2.d

Please Modify your PATH environment variable to include /opt/CTEactx/binPlease Modify your MANPATH environment variable to include /opt/CTEactx/man

Installation of was successful.

Explorer Package not present - will install Version 5.2,REV=2005.08.31.01.48...

Processing package instance from

Sun(TM) Explorer Data Collector(all) 5.2,REV=2005.08.31.01.48Copyright 1996-2005 Sun Microsystems, Inc.All rights reserved.## Executing checkinstall script.Using as the package base directory.## Processing package information.## Processing system information.## Verifying disk space requirements.## Checking for conflicts with packages already installed.## Checking for setuid/setgid programs.

This package contains scripts which will be executed with super-userpermission during the process of installing this package.

Do you want to continue with the installation of [y,n,?]Installing Sun(TM) Explorer Data Collector as

## Executing preinstall script.## Installing part 1 of 1./opt/SUNWexplo/LICENSEREADME/LICENSE.txt/opt/SUNWexplo/LICENSEREADME/THIRDPARTYLICENSEREADME.txt/opt/SUNWexplo/LICENSEREADME/gzip-1.2.4a.tar.gz/opt/SUNWexplo/LICENSEREADME/wget-1.9.tar.gz/opt/SUNWexplo/bin/capture.sparc/opt/SUNWexplo/bin/core_check.sh/opt/SUNWexplo/bin/diskinfo.i386/opt/SUNWexplo/bin/diskinfo.sparc/opt/SUNWexplo/bin/exp_defaults/opt/SUNWexplo/bin/explorer/opt/SUNWexplo/bin/explorer_notify_update/opt/SUNWexplo/bin/instinfo_config/opt/SUNWexplo/bin/j2se_config/opt/SUNWexplo/bin/mktime.i386/opt/SUNWexplo/bin/mktime.sparc/opt/SUNWexplo/bin/rprtfru.sparc/opt/SUNWexplo/bin/se3kxtr.ksh/opt/SUNWexplo/bin/snapshot/opt/SUNWexplo/bin/st_diag.i386/opt/SUNWexplo/bin/st_diag.sparc/opt/SUNWexplo/bin/sunone_config/opt/SUNWexplo/bin/sunone_ps/opt/SUNWexplo/bin/wget.i386/opt/SUNWexplo/bin/wget.sparc/opt/SUNWexplo/doc/CHANGES/opt/SUNWexplo/doc/README/opt/SUNWexplo/doc/README.j2se_config/opt/SUNWexplo/doc/README.man/opt/SUNWexplo/doc/README.sunone_config/opt/SUNWexplo/java/fruid-scappclient.jar/opt/SUNWexplo/java/libfru.jar/opt/SUNWexplo/lib/AMERICAS_countries.1/opt/SUNWexplo/lib/AMERICAS_countries.2/opt/SUNWexplo/lib/AMERICAS_countries.3/opt/SUNWexplo/lib/AMERICAS_countries_codes/opt/SUNWexplo/lib/APAC_countries.1/opt/SUNWexplo/lib/APAC_countries.2/opt/SUNWexplo/lib/APAC_countries.3/opt/SUNWexplo/lib/APAC_countries.4/opt/SUNWexplo/lib/APAC_countries_codes/opt/SUNWexplo/lib/EMEA_countries.1/opt/SUNWexplo/lib/EMEA_countries.2/opt/SUNWexplo/lib/EMEA_countries.3/opt/SUNWexplo/lib/EMEA_countries.4/opt/SUNWexplo/lib/EMEA_countries.5/opt/SUNWexplo/lib/EMEA_countries.6/opt/SUNWexplo/lib/EMEA_countries.7/opt/SUNWexplo/lib/EMEA_countries.8/opt/SUNWexplo/lib/EMEA_countries_codes/opt/SUNWexplo/lib/cmd.txt/opt/SUNWexplo/lib/cmd_ssh.txt/opt/SUNWexplo/lib/crontab.txt/opt/SUNWexplo/lib/exp_check/opt/SUNWexplo/lib/exp_common/opt/SUNWexplo/lib/exp_file/opt/SUNWexplo/lib/exp_ftp/opt/SUNWexplo/lib/exp_j2se/opt/SUNWexplo/lib/exp_mail/opt/SUNWexplo/lib/exp_main/opt/SUNWexplo/lib/exp_postproc/opt/SUNWexplo/lib/exp_sunone/opt/SUNWexplo/lib/exp_tools/opt/SUNWexplo/lib/exp_transport/opt/SUNWexplo/lib/libfru.so /opt/SUNWexplo/lib/libfru.so.1/opt/SUNWexplo/lib/libfrujni.so /opt/SUNWexplo/lib/libfrujni.so.1/opt/SUNWexplo/lib/libfrureg.so /opt/SUNWexplo/lib/libfrureg.so.1/opt/SUNWexplo/lib/libfrurmi.so /opt/SUNWexplo/lib/libfrurmi.so.1/opt/SUNWexplo/lib/libfruutils.so /opt/SUNWexplo/lib/libfruutils.so.1/opt/SUNWexplo/lib/locale/C/LC_MESSAGES/explorer.mo/opt/SUNWexplo/lib/locale/C/LC_MESSAGES/explorer.po/opt/SUNWexplo/lib/uu2b64/opt/SUNWexplo/man/man1m/explorer.1m/opt/SUNWexplo/man/man4/explorer.4/opt/SUNWexplo/man/man5/explorer.5/opt/SUNWexplo/tools/1280extended/opt/SUNWexplo/tools/Tx000/opt/SUNWexplo/tools/alomextended/opt/SUNWexplo/tools/b1600extended/opt/SUNWexplo/tools/b1600switch/opt/SUNWexplo/tools/cluster/opt/SUNWexplo/tools/cmdline/opt/SUNWexplo/tools/cst/opt/SUNWexplo/tools/disks/opt/SUNWexplo/tools/emc/opt/SUNWexplo/tools/etc/opt/SUNWexplo/tools/fcal/opt/SUNWexplo/tools/firelink/opt/SUNWexplo/tools/fma/opt/SUNWexplo/tools/fru/opt/SUNWexplo/tools/hds/opt/SUNWexplo/tools/init/opt/SUNWexplo/tools/instinfo/opt/SUNWexplo/tools/iplanet /opt/SUNWexplo/tools/j2se/opt/SUNWexplo/tools/ldap/opt/SUNWexplo/tools/lic/opt/SUNWexplo/tools/lp/opt/SUNWexplo/tools/lvm/opt/SUNWexplo/tools/messages/opt/SUNWexplo/tools/nbu/opt/SUNWexplo/tools/nbu_extended/opt/SUNWexplo/tools/ndd/opt/SUNWexplo/tools/netinfo/opt/SUNWexplo/tools/nhas/opt/SUNWexplo/tools/patch/opt/SUNWexplo/tools/photon/opt/SUNWexplo/tools/pkg/opt/SUNWexplo/tools/proc/opt/SUNWexplo/tools/samfs/opt/SUNWexplo/tools/sanextended/opt/SUNWexplo/tools/sap/opt/SUNWexplo/tools/sbu/opt/SUNWexplo/tools/scextended/opt/SUNWexplo/tools/se3k/opt/SUNWexplo/tools/se6130/opt/SUNWexplo/tools/se6320/opt/SUNWexplo/tools/se6920/opt/SUNWexplo/tools/sf15k_ndd/opt/SUNWexplo/tools/sf15k_sc/opt/SUNWexplo/tools/smfextended/opt/SUNWexplo/tools/sonoma/opt/SUNWexplo/tools/srscextended/opt/SUNWexplo/tools/ssa/opt/SUNWexplo/tools/ssp/opt/SUNWexplo/tools/storade/opt/SUNWexplo/tools/storedge/opt/SUNWexplo/tools/stortools/opt/SUNWexplo/tools/sunone/opt/SUNWexplo/tools/sunray/opt/SUNWexplo/tools/sysconfig/opt/SUNWexplo/tools/t3/opt/SUNWexplo/tools/t3extended/opt/SUNWexplo/tools/tape/opt/SUNWexplo/tools/test/opt/SUNWexplo/tools/u4ft/opt/SUNWexplo/tools/ufsextended/opt/SUNWexplo/tools/var/opt/SUNWexplo/tools/vtsst/opt/SUNWexplo/tools/vxfs/opt/SUNWexplo/tools/vxvm[ verifying class ]## Executing postinstall script.

Installation of was successful.

Processing package instance from

Sun(TM) Explorer Data Collector Config Files(all) 5.2,REV=2005.08.31.01.48Copyright 1996-2005 Sun Microsystems, Inc.All rights reserved.## Executing checkinstall script.Using as the package base directory.## Processing package information.## Processing system information. 2 package pathnames are already properly installed.## Verifying disk space requirements.## Checking for conflicts with packages already installed.## Checking for setuid/setgid programs.

This package contains scripts which will be executed with super-userpermission during the process of installing this package.

Do you want to continue with the installation of [y,n,?]Installing Sun(TM) Explorer Data Collector Config Files as

## Installing part 1 of 1./etc/opt/SUNWexplo/LICENSEREADME/LICENSE.txt/etc/opt/SUNWexplo/t3files.txt[ verifying class ]Modifying /etc/opt/SUNWexplo/1280input.txtModifying /etc/opt/SUNWexplo/alominput.txtModifying /etc/opt/SUNWexplo/b1600input.txtModifying /etc/opt/SUNWexplo/b1600switchinput.txtModifying /etc/opt/SUNWexplo/saninput.txtModifying /etc/opt/SUNWexplo/scinput.txtModifying /etc/opt/SUNWexplo/se6320input.txtModifying /etc/opt/SUNWexplo/se6920input.txtModifying /etc/opt/SUNWexplo/srscinput.txtModifying /etc/opt/SUNWexplo/t3input.txt[ verifying class ]## Executing postinstall script.

Installation of was successful.

Sneep Package not present - will install Version 2.5_R1.76...

Installation of was successful."ChassisSerialNumber" was not present in nvram .

****************************************************** * Please supply configuration information with care. * * Especially enter the following customer details: * * - Company Name (case sensitive) * * - System serial number * * - Contact Name * * - Contact email address * * - Address details * * The contract ID is not vital at this stage. * ******************************************************

Press RETURN to continue...

-----

Sun Microsystems, Inc. respects your desire for privacy. Personal informationcollected from this form will not be shared with organizations external to Sunwithout your consent, except to process data on Sun's behalf in connection withthis transaction. We will use your personal information for communicationsregarding Sun equipment and service related topics associated with the datasubmitted.

Sun, as a global company, may transfer your personal information to countrieswhich may not provide an adequate level of protection. Sun, however, iscommitted to providing a suitable & consistent level of protection for yourpersonal information regardless of the country in which it resides.

Completing the form below implies agreement with the above processing.

If you have any questions please refer to the Sun Privacy Policy or contact usatprivacy@sun.com. Note that entry of personal information into Explorer isoptional.

If you have any questions about this form or in the future wish to update ordelete any of the information provided, please contactexplorer-privacy@sun.com

-----

Absolute path name for Explorer defaults file? [/etc/opt/SUNWexplo/default/explorer]:

Company name []:Contract ID []:System serial number []:Contact name []:Contact email address []:Phone number []:Address (line 1) []:Address (line 2) []:City []:State []:Zip []:

Please select your geo from this list -

1) AMERICAS2) EMEA3) APAC

[AMERICAS]3APACPlease Enter the two character Country code or enter ? for a list of countries.[]:KRKR Korea, Republic of

Automatic Email Submission

Would you like all explorer output to be sent to:explorer-database-apac@sun.com

at the completion of explorer when -mail or -e is specified?[y,n] n

Alternate Email Addresses

Would you like explorer output to be sent to alternate email addresses at the completion of explorer? If not, enter a single "-"only for your reply.

To enter multiple addresses, seperate them with a comma (,). []:

Return address for explorer email output []:

To receive email notification that your explorer output has been loaded into the repository,enter the email address to send the notification to.If notification is not wanted, enter a single "-". []:

You have answered: Company name: Contract ID:

System serial number:

Contact name: Contact email address: Phone number: Address (line 1): Address (line 2): City: State: Zip: Country: Korea, Republic of Country Code: KR

Geography: APAC Mail output to: Mail output from: Mail on data load: Are these values okay?[y,n] y

Do you wish to schedule explorer in cron? [y,n] n

Jan 18 19:07:52 protos[870] explorer: Explorer defaults file updated.Jan 18 19:07:52 protos[870] explorer: Please run /bin/explorer with options to collect data.

****************************************************** * You have used an EIS-CD that is > 50 days old! * * Please ensure that you use the most recent version * ******************************************************

*********************************************************** * BEWARE: ROOT's .profile does NOT source .profile-EIS * * PLEASE: examine why this is not sourced! * * For EIS scripts to function it MUST be sourced! * * See file root-profile on EIS-CD for suggestion! * ***********************************************************

**************************************************************************** It looks as if the system serial number is not in the explorer defaults ** This may affect the compliancy numbers for this installation ** ** Please rectify this via explorer -g ** and then use /opt/SUNWsneep/bin/sneep ** to save the serial number into eeprom ****************************************************************************

setup-standard completed.

> create /SP/users/admin role=Administrator cli_mode=alomCreating user...Enter new password: ********Enter new password again: ********Created /SP/users/admin-> set /SP/users/admin password=admin1234Changing password for user /SP/users/admin...Enter new password again: *********New password was successfully set for user /SP/users/admin-> show /SP/users/admin/SP/users/admin Targets: Properties: role = Administrator password = ***** cli_mode = alom Commands: cd set show->ILOM Shell:-> set /SP/alertmgmt/rules/1 destination=pupil@ilom.com.cn level=minor type=emailSet 'destination' to 'pupil@ilom.com.cn'Set 'level' to 'minor'Set 'type' to 'email'-> show/SP/alertmgmt/rules/1 Targets: Properties: community_or_username = public destination = pupil@ilom.com.cn destination_port = 0 level = minor snmp_version = 1 type = email Commands: cd set show->ILOM ShellNTP:-> pwdCurrent default target: /-> cd /SP/clock/SP/clock-> ls/SP/clock Targets: Properties: datetime = Tue Sep 16 12:42:29 2008 usentpserver = disabled Commands: cd set show-> set usentpserver=enabledSet 'usentpserver' to 'enabled'-> ls/SP/clock Targets: Properties: datetime = Tue Sep 16 12:42:38 2008 usentpserver = enabled Commands: cd set show-> cd /SP/clients/ntp/server/1/SP/clients/ntp/server/1-> ls/SP/clients/ntp/server/1 Targets: Properties: address = 0.0.0.0 Commands: cd set show-> set address=10.30.1.105Set 'address' to '10.30.1.105'-> ls/SP/clients/ntp/server/1 Targets: Properties: address = 10.30.1.105 Commands: cd set show->ILOM Shellsyslog:-> pwdCurrent default target: /-> cd /SP/clients/syslog/SP/clients/syslog-> pwdCurrent default target: /SP/clients/syslog-> ls/SP/clients/syslog Targets: Properties: destination_ip1 = 0.0.0.0 destination_ip2 = 0.0.0.0 Commands: cd set show-> set destination_ip1=10.40.157.22Set 'destination_ip1' to '10.40.157.22'-> ls/SP/clients/syslog Targets: Properties: destination_ip1 = 10.40.157.22 destination_ip2 = 0.0.0.0 Commands: cd set show->ILOM Shell:SUNSP00144F97B6A1 login: rootPassword: Waiting for daemons to initialize...Daemons readySun(TM) Integrated Lights Out ManagerVersion 2.0.4.23.bCopyright 2008 Sun Microsystems, Inc. All rights reserved.Use is subject to license terms.Warning: password is set to factory default.-> version SP firmware 2.0.4.23.bSP firmware build number: 34167SP firmware date: Fri Jul 11 08:30:16 PDT 2008SP filesystem version: 0.1.14-> show /SP/SP Targets: alertmgmt cli clients clock console faultmgmt logs network policy powermgmt serial services sessions users Properties: customer_frudata = (none) hostname = SUNSP00144F97B6A1 reset_to_defaults = none system_identifier = Sun T5220 Commands: cd reset set show version-> show /HOST/HOST Targets: bootmode diag Properties: autorestart = reset autorunonerror = false hypervisor_version = Hypervisor 1.6.4.b 2008/07/11 08:04 macaddress = 00:14:4f:97:b6:98 obp_version = OBP 4.28.8 2008/06/25 12:21 post_version = POST 4.28.9 2008/06/30 21:57 send_break_action = (none) status = Powered off sysfw_version = Sun System Firmware 7.1.3.d 2008/07/11 08:46 Commands: cd set show-> show /SYS/SYS Targets: SERVICE LOCATE ACT PS_FAULT TEMP_FAULT FAN_FAULT MB HDD0 HDD1 HDD2 HDD3 HDD4 HDD5 HDD6 HDD7 PDB SASBP DVD TTYA USBBD FANBD0 FANBD1 PS0 PS1 VPS Properties: type = Host System keyswitch_state = Normal product_name = SPARC-Enterprise-T5220 product_part_number = 602-3822-08 product_serial_number = BEL08046RF fault_state = Faulted power_state = Off Commands: cd reset set show start stop-> ILOM Shell:-> start /SYSAre you sure you want to start /SYS (y/n)? yStarting /SYS-> start /SP/consoleAre you sure you want to start /SP/console (y/n)? ySerial console started. To stop, type #.ILOM ShellSP:-> show /SP/services/SP/services Targets: http https servicetag snmp ssh Properties: Commands: cd show-> show /SP/services/http/SP/services/http Targets: Properties: port = 80 secureredirect = enabled servicestate = disabled Commands: cd set show-> show /SP/services/https/SP/services/https Targets: Properties: port = 443 servicestate = enabled Commands: cd set show-> show /SP/services/servicetag /SP/services/servicetag Targets: Properties: product_urn = urn:uuid:6bfd9efc-e300-11db-8c3c-080020a9ed93 state = enabled Commands: cd set show-> show /SP/services/snmp /SP/services/snmp Targets: communities users Properties: engineid = (none) port = 161 sets = disabled v1 = disabled v2c = disabled v3 = enabled Commands: cd set show-> show /SP/services/ssh /SP/services/ssh Targets: keys Properties: generate_new_key_action = (Cannot show property) generate_new_key_type = none restart_sshd_action = (Cannot show property) state = enabled Commands: cd set show-> show /SP/network /SP/network Targets: Properties: commitpending = (Cannot show property) dhcp_server_ip = none ipaddress = 10.40.157.239 ipdiscovery = static ipgateway = 10.40.157.254 ipnetmask = 255.255.255.0 macaddress = 00:14:4F:97:B6:A1 pendingipaddress = 10.40.157.239 pendingipdiscovery = static pendingipgateway = 10.40.157.254 pendingipnetmask = 255.255.255.0 state = enabled Commands: cd set show-> sunserviceSP:SUNSP00144F97B6A1 login: sunservicePassword: Copyright 2007 Sun Microsystem, Inc. All rights reserved.WARNING: The "sunservice" account is provided solely to allowSun Services to perform diagnosis and recovery tasks. Customer use ofthe "sunservice" account may interfere with the correct operation ofILOM and is not supported other than to perform recovery procedures asdocumented by Sun Microsystems. Normal ILOM operations should always beperformed using the root account. Further usage of the "sunservice"account implies your agreement with these terms.[(flash)root@SUNSP00144F97B6A1:~]# cat /etc/versions SP firmware: 2.0.4.23.bSP firmware date: Fri Jul 11 08:30:16 PDT 2008SP firmware build number: 34167SP firmware repository: http://ilomsvn.east/svnht/platform/hotamale/branches/2.0.4.23SP platform class: huron/sp-dev.885SP filesystem: 0.1.14SP builder: kbellew@sanpen-rh5-1[(flash)root@SUNSP00144F97B6A1:~]# cat /proc/version Linux version 2.4.22 (kbellew@sanpen-rh5-1) (gcc version 3.3.4) #2 Fri Jul 11 08:18:52 PDT 2008 r34167[(flash)root@SUNSP00144F97B6A1:~]# cat /proc/cpuinfo cpu : 8xxclock : 133MHzbus clock : 66MHzrevision : 0.0 (pvr 0050 0000)bogomips : 132.71[(flash)root@SUNSP00144F97B6A1:~]# cat /proc/meminfo total: used: free: shared: buffers: cached:Mem: 64405504 61280256 3125248 0 5251072 16510976Swap: 0 0 0MemTotal: 62896 kBMemFree: 3052 kBMemShared: 0 kBBuffers: 5128 kBCached: 16124 kBSwapCached: 0 kBActive: 25176 kBInactive: 25356 kBHighTotal: 0 kBHighFree: 0 kBLowTotal: 62896 kBLowFree: 3052 kBSwapTotal: 0 kBSwapFree: 0 kB[(flash)root@SUNSP00144F97B6A1:~]# cat /proc/modules tffs_h3 585784 2immap 2160 5fpga_flash 3140 0fpga 8520 4 [fpga_flash][(flash)root@SUNSP00144F97B6A1:~]# cat /proc/filesystems nodev rootfsnodev bdevnodev procnodev sockfsnodev tmpfsnodev shmnodev pipefs ext3 ext2 cramfsnodev ramfs msdos vfatnodev nfs jffs2nodev devpts squashfs[(flash)root@SUNSP00144F97B6A1:~]# ip link1: lo: mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:002: eth0: mtu 1500 qdisc pfifo_fast qlen 100 link/ether 00:14:4f:97:b6:a1 brd ff:ff:ff:ff:ff:ff[(flash)root@SUNSP00144F97B6A1:~]# cat /etc/group root:*:0:root,operatorbin:*:1:bindaemon:*:2:daemonsys:*:3:sysadm:*:4:admtty:*:5:disk:*:6:lp:*:7:lpsync:*:8:syncshutdown:*:9:shutdownhalt:*:10:haltmail:*:11:mailnews:*:12:newsuucp:*:13:uucpftp:*:14:ftpkmem:*:15:utmp:*:16:shadow:*:17:users:*:100:nobody:*:65533:nogroup:*:65534:webR::101:root,ldapproxy,radproxy,pamproxy-admin,pamproxy-oper,admin,pupil,ilomintwebRW::102:root,ldapproxy,radproxy,pamproxy-admin,pamproxy-oper,admin,pupil,ilomintvideoR::103:root,pamproxy-admin,admin,pupil,ilomintvideoRW::104:root,pamproxy-admin,admin,pupil,ilomintsshR::105:root,ldapproxy,radproxy,pamproxy-admin,pamproxy-oper,admin,pupil,ilomintsshRW::106:root,ldapproxy,radproxy,pamproxy-admin,pamproxy-oper,admin,pupil,ilomintcuriR::107:rootcuriRW::108:rootsnmpR::109:rootsnmpRW::110:root[(flash)root@SUNSP00144F97B6A1:~]# cat /etc/passwdroot:x:0:0:privileged:/home/0:/usr/local/bin/spshsunservice:x:0:106:privileged:/home/0:/bin/bashbin:*:1:1:bin:/bin:daemon:*:2:2:daemon:/usr/sbin:sys:*:3:3:sys:/dev:adm:*:4:4:adm:/var/adm:lp:*:5:7:lp:/var/spool/lpd:sync:*:6:8:sync:/bin:/bin/syncshutdown:*:7:9:shutdown:/sbin:/sbin/shutdownhalt:*:8:10:halt:/sbin:/sbin/haltmail:*:9:11:mail:/var/spool/mail:news:*:10:12:news:/var/spool/news:uucp:*:11:13:uucp:/var/spool/uucp:operator:*:12:0:operator:/root:games:*:13:100:games:/usr/games:ftp:*:15:14:ftp:/var/ftp:man:*:16:100:man:/var/cache/man:sshd:*:17:100:sshdspecial:/home:/bin/shnobody:*:65534:65534:nobody:/home:/bin/shanonymous:x:500:500::/home:/bin/falseldapproxy:x:513:513::/home/513:/usr/local/bin/spshradproxy:x:511:511::/home/511:/usr/local/bin/spshpamproxy-admin:x:514:514::/home/514:/usr/local/bin/spshpamproxy-oper:x:515:515::/home/515:/usr/local/bin/spshadmin:x:502:502::/home/502:/usr/local/bin/spshpupil:x:503:503::/home/503:/usr/local/bin/spshilomint:x:512:512::/home/512:/usr/local/bin/spsh[(flash)root@SUNSP00144F97B6A1:~]# cat /etc/inittab# /etc/inittab: init(8) configuration.# $Id: inittab,v 1.1 2005/02/02 03:38:12 subashk Exp $## target.flashonly# The default runlevel.id:3:initdefault:# Boot-time system configuration/initialization script.# This is run first except when booting in emergency (-b) mode.si::sysinit:/etc/init.d/rcS# What to do in single-user mode.~~:S:wait:/sbin/sulogin# /etc/init.d executes the S and K scripts upon change# of runlevel.## Runlevel 0 is halt.# Runlevel 1 is single-user.# Runlevels 2-5 are multi-user.# Runlevel 6 is reboot.l0:0:wait:/etc/init.d/rc 0l1:1:wait:/etc/init.d/rc 1l2:2:wait:/etc/init.d/rc 2l3:3:wait:/etc/init.d/rc 3l4:4:wait:/etc/init.d/rc 4l5:5:wait:/etc/init.d/rc 5l6:6:wait:/etc/init.d/rc 6# Normally not reached, but fallthrough in case of emergency.z6:6:respawn:/sbin/sulogin# What to do when CTRL-ALT-DEL is pressed.ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now# Action on special keypress (ALT-UpArrow).kb::kbrequest:/bin/echo "Keyboard Request--edit /etc/inittab to let this work."# What to do when the power fails/returns.pf::powerwait:/etc/init.d/powerfail startpn::powerfailnow:/etc/init.d/powerfail nowpo::powerokwait:/etc/init.d/powerfail stopcon:2345:respawn:/usr/local/bin/getty.sh### Abusing init to keep the following daemons alive. There are two serious# problems with this scheme:# There is no control over which daemons get started when. That should be# done using the rc?.d scripts to control startup and shutdown.## If a daemon is crashing, init will either silently restart it, giving# the developer no hint that there's a problem, and also potentially # filling up /coredump with multiple corefiles; init can also choose to # suspend restarting a daemon that is crashing frequently, disabling# services necessary for proper opertation of the sp. In any case, using# init to paper over buggy daemons is only going to lead to unpredictable# behavior and reduce the reliability of the sp.## The only daemons that should be started in this manner are those that# have no dependency or provide no prerequisite to proper sp operation, and# only restart those daemons that are specifically designed to be restarted,# such as getty.#logm:3:respawn:/usr/local/bin/logmgrevtm:3:respawn:/usr/local/bin/eventmgrplhw:3:respawn:/usr/local/bin/plathwsvcdfrud:3:respawn:/usr/local/bin/frudcnsd:3:respawn:/usr/local/bin/consdlumn:3:respawn:/usr/local/bin/lumain lupx:3:respawn:/usr/local/bin/luproxysnmp:3:respawn:/etc/snmp/snmpd.sh startwebg:3:respawn:/usr/local/bin/webgo /usr/local/www -dsccd:3:once:/usr/local/bin/sccdntpd:3:respawn:/usr/sbin/ntpd -n -gfmad:3:respawn:/opt/sun/fm/sbin/fma.sh runeald:3:respawn:/usr/local/bin/ealertd[(flash)root@SUNSP00144F97B6A1:~]# ps -eaf PID Uid VmSize Stat Command 1 root 564 S ini 2 root SW [keventd] 3 root SWN [ksoftirqd_CPU0] 4 root SW [kswapd] 5 root SW [bdflush] 6 root SW [kupdated] 7 root SW [mtdblockd] 127 root SW [tffs1] 130 root SW [kjournald] 132 root SW [loop0] 133 root SW [kjournald] 135 root SW [loop1] 136 root SW [kjournald] 141 root SW [kjournald] 200 bin 480 S /sbin/portmap 228 root 648 S /sbin/syslogd -s 100 -p /var/syslogsock 230 root 716 S /sbin/klogd -c 1 233 root 736 S /usr/sbin/cron 236 root 2660 S /usr/local/bin/IPMIMain 237 root 2472 S [dbgLevelUpdater] 246 root 2552 S [Timer] 247 root 3004 S [MsgHndlr] 248 root 2568 S [PEF] 249 root 2540 S [ChassisCtrl] 250 root 2600 S [ChassisTimer] 258 root 1340 S /usr/sbin/sshd 277 root 3004 S [MsgHndlr] 278 root 3004 S [MsgHndlr] 279 root 2708 S [LAN] 282 root 2460 S /usr/local/bin/stdiscoverer 285 root 2600 S [ChassisTimer] 286 root 2600 S [ChassisTimer] 287 root 2708 S [LAN] 288 root 2708 S [LAN] 289 root 2708 S [LAN] 290 root 2504 S /usr/local/bin/stlistener 299 root 2784 S /usr/local/bin/logmgr 300 root 568 S /usr/local/bin/eventmgr 301 root 3488 S /usr/local/bin/plathwsvcd 302 root 2676 S /usr/local/bin/frud 303 root 576 S /usr/local/bin/consd 304 root 4316 S /usr/local/bin/lumain 308 root 1368 S /bin/bash /etc/snmp/snmpd.sh start 309 root 3412 S /usr/local/bin/webgo /usr/local/www -d 310 root 2592 S /usr/local/bin/sccd 312 root 3636 S /usr/sbin/ntpd -n -g 313 root 1424 S /bin/bash /opt/sun/fm/sbin/fma.sh run 314 root 3228 S /usr/local/bin/ealertd 338 root 4800 S /usr/local/bin/snmpd -A -f -Le -p /var/run/snmpd.pid 339 root 1380 S /bin/bash /etc/snmp/snmpd.sh start 346 root 2676 S /usr/local/bin/frud 348 root 2676 S /usr/local/bin/frud 351 root 2676 S /usr/local/bin/frud 352 root 1412 S /bin/bash /opt/sun/fm/sbin/fma.sh run 354 root 740 S /opt/sun/sysevent/sbin/ksyseventd -v 5 -f 355 root 516 S /usr/bin/logger -t KSERUN 356 root 3488 S /usr/local/bin/plathwsvcd 357 root 3488 S /usr/local/bin/plathwsvcd 358 root 3488 S /usr/local/bin/plathwsvcd 359 root 3488 S /usr/local/bin/plathwsvcd 360 root 740 S /opt/sun/sysevent/sbin/ksyseventd -v 5 -f 361 root 3228 S /usr/local/bin/ealertd 363 root 740 S /opt/sun/sysevent/sbin/ksyseventd -v 5 -f 364 root 740 S /opt/sun/sysevent/sbin/ksyseventd -v 5 -f 365 root 3228 S /usr/local/bin/ealertd 366 root 3228 S /usr/local/bin/ealertd 368 root 2592 S /usr/local/bin/sccd 369 root 2592 S /usr/local/bin/sccd 370 root 740 S /opt/sun/sysevent/sbin/ksyseventd -v 5 -f 371 root 2592 S /usr/local/bin/sccd 378 root 4316 S /usr/local/bin/lumain 379 root 1424 S /bin/bash /opt/sun/fm/sbin/fma.sh run 380 root 3572 S /opt/sun/fm/sbin/fmd -o fg true -o debug all -o clien 381 root 1432 S /bin/bash /opt/sun/fm/sbin/fma.sh run 383 root 4316 S /usr/local/bin/lumain 386 root 736 S /usr/local/bin/luproxy 390 root 2784 S /usr/local/bin/logmgr 391 root 2784 S /usr/local/bin/logmgr 392 root 2784 S /usr/local/bin/logmgr 394 root 2784 S /usr/local/bin/logmgr 395 root 3572 S /opt/sun/fm/sbin/fmd -o fg true -o debug all -o clien 396 root 3572 S /opt/sun/fm/sbin/fmd -o fg true -o debug all -o clien 397 root 3572 S /opt/sun/fm/sbin/fmd -o fg true -o debug all -o clien 400 root 3572 S /opt/sun/fm/sbin/fmd -o fg true -o debug all -o clien 401 root 740 S /opt/sun/sysevent/sbin/ksyseventd -v 5 -f 403 root 3572 S /opt/sun/fm/sbin/fmd -o fg true -o debug all -o clien 405 root 3572 S /opt/sun/fm/sbin/fmd -o fg true -o debug all -o clien 408 root 740 S /opt/sun/sysevent/sbin/ksyseventd -v 5 -f 409 root 3572 S /opt/sun/fm/sbin/fmd -o fg true -o debug all -o clien 412 root 3572 S /opt/sun/fm/sbin/fmd -o fg true -o debug all -o clien 426 root 4316 S /usr/local/bin/lumain 428 root 3572 S /opt/sun/fm/sbin/fmd -o fg true -o debug all -o clien 429 root 3572 S /opt/sun/fm/sbin/fmd -o fg true -o debug all -o clien 440 root 3572 S /opt/sun/fm/sbin/fmd -o fg true -o debug all -o clien 441 root 3572 S /opt/sun/fm/sbin/fmd -o fg true -o debug all -o clien 447 root 3572 S /opt/sun/fm/sbin/fmd -o fg true -o debug all -o clien 454 root 3492 S /usr/local/bin/plathwsvcd 455 root 5436 S /usr/local/bin/vbsc 456 root 3492 S /usr/local/bin/plathwsvcd 457 root 3488 S /usr/local/bin/plathwsvcd 458 root 3492 S /usr/local/bin/plathwsvcd 459 root 3492 S /usr/local/bin/plathwsvcd 460 root 3492 S /usr/local/bin/plathwsvcd 461 root 3492 S /usr/local/bin/plathwsvcd 462 root 3492 S /usr/local/bin/plathwsvcd 463 root 3492 S /usr/local/bin/plathwsvcd 464 root 3492 S /usr/local/bin/plathwsvcd 465 root 3492 S /usr/local/bin/plathwsvcd 466 root 3488 S /usr/local/bin/plathwsvcd 467 root 3492 S /usr/local/bin/plathwsvcd 468 root 3492 S /usr/local/bin/plathwsvcd 469 root 3488 S /usr/local/bin/plathwsvcd 479 root 5436 S /usr/local/bin/vbsc 480 root 5436 S /usr/local/bin/vbsc 484 root 4800 S /usr/local/bin/snmpd -A -f -Le -p /var/run/snmpd.pid 486 root 4800 S /usr/local/bin/snmpd -A -f -Le -p /var/run/snmpd.pid 533 root 5436 S /usr/local/bin/vbsc 550 root 5436 S /usr/local/bin/vbsc 552 root 5436 S /usr/local/bin/vbsc 553 root 5436 S /usr/local/bin/vbsc 555 root 5436 S /usr/local/bin/vbsc 557 root 5436 S /usr/local/bin/vbsc 559 root 5436 S /usr/local/bin/vbsc 561 root 5436 S /usr/local/bin/vbsc 563 root 5436 S /usr/local/bin/vbsc 564 root 5436 S /usr/local/bin/vbsc 565 root 5436 S /usr/local/bin/vbsc 566 root 5436 S /usr/local/bin/vbsc 567 root 5436 S /usr/local/bin/vbsc 569 root 5436 S /usr/local/bin/vbsc 571 root 5436 S /usr/local/bin/vbsc 572 root 5436 S /usr/local/bin/vbsc 574 root 5436 S /usr/local/bin/vbsc 576 root 5436 S /usr/local/bin/vbsc 577 root 5436 S /usr/local/bin/vbsc 578 root 5436 S /usr/local/bin/vbsc 579 root 5436 S /usr/local/bin/vbsc 580 root 5436 S /usr/local/bin/vbsc 582 root 5436 S /usr/local/bin/vbsc 584 root 5436 S /usr/local/bin/vbsc 585 root 5436 S /usr/local/bin/vbsc 586 root 5436 S /usr/local/bin/vbsc 587 root 5436 S /usr/local/bin/vbsc 588 root 5436 S /usr/local/bin/vbsc 589 root 5436 S /usr/local/bin/vbsc 590 root 5436 S /usr/local/bin/vbsc 621 root 5436 S /usr/local/bin/vbsc 622 root 5436 S /usr/local/bin/vbsc 623 root 5436 S /usr/local/bin/vbsc 626 root 5436 S /usr/local/bin/vbsc 627 root 5436 S /usr/local/bin/vbsc 628 root 5436 S /usr/local/bin/vbsc 629 root 5436 S /usr/local/bin/vbsc 630 root 5436 S /usr/local/bin/vbsc 631 root 5436 S /usr/local/bin/vbsc 632 root 5436 S /usr/local/bin/vbsc 633 root 5436 S /usr/local/bin/vbsc 634 root 5436 S /usr/local/bin/vbsc 635 root 5436 S /usr/local/bin/vbsc 636 root 5436 S /usr/local/bin/vbsc 637 root 5436 S /usr/local/bin/vbsc 638 root 5436 S /usr/local/bin/vbsc 639 root 5436 S /usr/local/bin/vbsc 3451 root 1552 S -bash 3570 root 356 S sleep 60 3588 root 668 R ps -eaf [(flash)root@SUNSP00144F97B6A1:~]# ILOMroot:U-Boot 1.1.1 (Jul 11 2008 - 08:15:02)CPU: MPC885ZPnn at 133 MHz: 8 kB I-Cache 8 kB D-Cache FEC presentBoard: SPARC885 Watchdog enabledI2C: readyDRAM: trying 128 MBytestrying 64 MBytes(64 MB SDRAM) 64 MBFLASH: 32 MBIn: serialOut: serialErr: serialNet: FEC ETHERNETPOST i2c c d 18 20 23 2a 2d 2e 30 40 43 46 51 53 54 56 68 69 6a 6b 70 71 PASSEDPOST cpu PASSEDPOST ethernet PASSEDBooting linux in 5 seconds...u-boot> ?? - alias for 'help'autoscr - run script from memorybase - print or set address offsetbdinfo - print Board Info structureboot - boot default, i.e., run 'bootcmd'bootd - boot default, i.e., run 'bootcmd'bootm - boot application image from memorybootp - boot image via network using BootP/TFTP protocolbrginfo - print Baud Rate Generator (BRG) registerscarinfo - print Clocks and Reset registerschpart - change active partitioncmp - memory compareconinfo - print console devices and informationscp - memory copycrc32 - checksum calculationdhcp - invoke DHCP client to obtain IP/boot paramsdiag - perform board diagnosticsdmainfo - print SDMA/IDMA registersecho - echo args to consoleerase - erase FLASH memoryfccinfo - print FCC registersflinfo - print FLASH memory informationfsinfo - print information about filesystemsfsload - load binary file from a filesystem imagego - start application at address 'addr'help - print online helpi2cinfo - print I2C registersicrc32 - checksum calculationiloop - infinite loop on address rangeimd - i2c memory displayiminfo - print header information for application imageimls - list all images found in flashimm - i2c memory modify (auto-incrementing)imw - memory write (fill)inm - memory modify (constant address)iopget - get single I/O Port registersiopinfo - print I/O Port registersiopset - set I/O Port registersiprobe - probe to discover valid I2C chip addressesisdram - print SDRAM configuration informationitest - return true/false on integer compareloadb - load binary file over serial line (kermit mode)loads - load S-Record file over serial lineloop - infinite loop on address rangels - list files in a directory (default /)mccinfo - print MCC registersmd - memory displaymemcinfo- print Memory Controller registersmii - MII utility commandsmm - memory modify (auto-incrementing)mtest - simple RAM testmuxinfo - print CPM Multiplexing registersmw - memory write (fill)nfs - boot image via network using NFS protocolnm - memory modify (constant address)ping - send ICMP ECHO_REQUEST to network hostprintenv- print environment variablesprotect - enable or disable FLASH write protectionrarpboot- boot image via network using RARP/TFTP protocolreginfo - print register informationreset - Perform RESET of the CPUrun - run commands in an environment variablesaveenv - save environment variables to persistent storagesccinfo - print SCC registerssetenv - set environment variablessiinfo - print Serial Interface (SI) registerssitinfo - print System Integration Timers (SIT) registerssiuinfo - print System Interface Unit (SIU) registerssleep - delay execution for some timesmcinfo - print SMC registersspiinfo - print Serial Peripheral Interface (SPI) registerstftpboot- boot image via network using TFTP protocolversion - print monitor versionu-boot> versionU-Boot 1.1.1 (Jul 11 2008 - 08:15:02)u-boot> printenvbootcmd=setenv bootargs root=/dev/mtdblock4 rootfstype=squashfs ro mtdparts=phys:384K(u1),128k(e1),1536K(k1),14M(r1),384K(u2),128K(e2),1536K(k2),14M(r2); bootm 0xfe080000bootdelay=5ethaddr=00:14:4f:97:b6:a1baudrate=9600stdin=serialstdout=serialstderr=serialethact=FEC ETHERNETEnvironment size: 284/16380 bytesu-boot> setenv bootargs=root /dev/mtdblock4 rootfstype=squashfs ro init=/bin/bash mtdparts=phys:384K(u1),128k(e1),1536K(k1),14M(r1),384K(u2),128K(e2),1536K(k2),14M(r2)u-boot> bootm 0xfe080000## Booting image at fe080000 ... Image Name: Linux-2.4.22 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 814990 Bytes = 795.9 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OKdo_bootm_linux(): argv[0]=bootm argv[1]=0xfe080000## Current stack ends at 0x03D38B70 => set upper limit to 0x00800000No initrd## cmdline at 0x007FFF00 ... 0x007FFF8Fmemstart = 0x00000000memsize = 0x04000000flashstart = 0xFE000000flashsize = 0x02000000flashoffset = 0x0004C000sramstart = 0x00000000sramsize = 0x00000000EnvAddr = 0x0003AAE8EnvSize = 0x00055878sectorsize = 0x00020000sectorcount = 0x00000100booted = 0xFE080000boottype = 0x00000000primary = 0xFFFFFFFFpritype = 0x00000000secondary = 0xFFFFFFFFsectype = 0x00000000image0 = 0xFE000000image1 = 0xFF000000maximage = 0x01000000immr_base = 0xF0000000bootflags = 0x00000001intfreq = 133 MHzbusfreq = 66.500 MHzethaddr = 00:14:4F:97:B6:A1IP addr = 0.0.0.0baudrate = 9600 bps## Transferring control to Linux (at address 00000000) ...## parameters(007ffe90,00000000,00000000,007fff00,007fff8f)Linux version 2.4.22 (kbellew@sanpen-rh5-1) (gcc version 3.3.4) #2 Fri Jul 11 08:18:52 PDT 2008 r34167On node 0 totalpages: 16384zone(0): 16384 pages.zone(1): 0 pages.zone(2): 0 pages.Kernel command line: root=/dev/mtdblock4 rootfstype=squashfs ro init=/bin/bash mtdparts=phys:384K(u1),128k(e1),1536K(k1),14M(r1),384K(u2),128K(e2),1536K(k2),14M(r2)Decrementer Frequency = 498750000/60m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)m8xx_wdt: keep-alive trigger installed (PITC: 0x1000)Calibrating delay loop... 132.71 BogoMIPSMemory: 62828k available (1416k kernel code, 444k data, 68k init, 0k highmem)Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)Inode cache hash table entries: 4096 (order: 3, 32768 bytes)Mount cache hash table entries: 512 (order: 0, 4096 bytes)Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)Page-cache hash table entries: 16384 (order: 4, 65536 bytes)POSIX conformance testing by UNIFIXLinux NET4.0 for Linux 2.4Based upon Swansea University Computer Society NET3.039Initializing RT netlink socketStarting kswapdJournalled Block Device driver loadedJFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.squashfs: version 3.0 (2006/03/15) Phillip LougherCPM UART driver version 0.03ttyS00 at 0x0100 is apty: 256 Unix98 ptys configuredGeneric RTC Driver v1.07eth0: FEC ENET Version 0.2, FEC irq 3, MII irq 6, addr 00:14:4f:97:b6:a1RAMDISK driver initialized: 16 RAM disks of 18432K size 1024 blocksizeeth0: Phy @ 0x0, type DM9161 (0x0181b881)loop: loaded (max 8 devices)physmap flash device: 2000000 at fe000000Amd/Fujitsu Extended Query Table v1.3 at 0x0040number of CFI chips: 1Using command line partition definitionCreating 8 MTD partitions on "Physically mapped flash":mtdblock1: 0x00000000-0x00060000 : "u1"mtdblock2: 0x00060000-0x00080000 : "e1"mtdblock3: 0x00080000-0x00200000 : "k1"mtdblock4: 0x00200000-0x01000000 : "r1"mtdblock5: 0x01000000-0x01060000 : "u2"mtdblock6: 0x01060000-0x01080000 : "e2"mtdblock7: 0x01080000-0x01200000 : "k2"mtdblock8: 0x01200000-0x02000000 : "r2"i2c-core.o: i2c core module version 2.6.1 (20010830)i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)i2c-rpx.o: i2c MPC8xx module version 2.6.1 (20010830)NET4: Linux TCP/IP 1.0 for NET4.0IP Protocols: ICMP, UDP, TCP, IGMPIP: routing cache hash table of 512 buckets, 4KbytesTCP: Hash tables configured (established 4096 bind 8192)ip_conntrack version 2.1 (512 buckets, 4096 max) - 292 bytes per conntrackip_tables: (C) 2000-2002 Netfilter core teamipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/arp_tables: (C) 2002 David S. MillerNET4: Unix domain sockets 1.0/SMP for Linux NET4.0.802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller VFS: Mounted root (squashfs filesystem) readonly.Freeing unused kernel memory: 68k initinit-2.05b# mount warning: can't open /etc/mtab: No such file or directoryinit-2.05b# mount -o rw,remount /init-2.05b# mountwarning: can't open /etc/mtab: No such file or directoryinit-2.05b# lsmodModule Size Used byinit-2.05b# insmod /lib/modules/2.4.22/misc/tffs/tffs_h3.oUsing /lib/modules/2.4.22/misc/tffs/tffs_h3.otffs: TrueFFS driver 7100.76tffs: will not use IRQtffs: Looking for G4/P4 MDOC Devices while assuming IF_CFG=16.tffs: Looking for G4/P4 MDOC Devices while assuming IF_CFG=8.tffs: Flow: G4_docWindowBaseAddress Exit (NOT FOUND).tffs: Looking for G3/P3 MDOC Devices while assuming IF_CFG=16.tffs: Looking for G3/P3 MDOC Devices while assuming IF_CFG=8.tffs: Looking for H1 DOC at address 0xc714c000 tffs: DOCH foundtffs: Socket 0 in addr 0xf4000000tffs: Device 0x0: size 0x76c0000 HW sector 0x200 (recommended 0x1000)tffs: use major device number 100Partition check:tffsa: tffsa1 tffsa2 tffsa3tffs: disk partition: dev_number=0x6401, 65534 sectors, start_sector=1tffs: disk partition: dev_number=0x6402, 65536 sectors, start_sector=65535tffs: disk partition: dev_number=0x6403, 112000 sectors, start_sector=131071init-2.05b# lsmodModule Size Used bytffs_h3 585784 0 (unused)init-2.05b# mount -t ext3 /dev/tffsa1 /storekjournald starting. Commit interval 5 secondsEXT3-fs warning: maximal mount count reached, running e2fsck is recommendedEXT3 FS 2.4-0.9.19, 19 August 2002 on tffs(100,1), internal journalEXT3-fs: mounted filesystem with ordered data mode.init-2.05b# mountwarning: can't open /etc/mtab: No such file or directoryinit-2.05b# mount -o loop /store/ParamsEXT3.bin /mntkjournald starting. Commit interval 5 secondsEXT3-fs warning: maximal mount count reached, running e2fsck is recommendedEXT3 FS 2.4-0.9.19, 19 August 2002 on loop(7,0), internal journalEXT3-fs: mounted filesystem with ordered data mode.init-2.05b# mountwarning: can't open /etc/mtab: No such file or directoryinit-2.05b# df -hFilesystem Size Used Available Use% Mounted ondf: /proc/mounts: No such file or directoryinit-2.05b# cat /mnt/clearpasswdroot:changemeanonymous:ldapproxy:XvyJPtVlXFMPradproxy:quOLpjPscUQrpamproxy-admin:lVMW9FZAHLldG1pamproxy-oper:eqUQC7NvjyjLXTadmin:admin1234ilomint:MdaMxbVguFlEinit-2.05b# nmapILOM:C:\WINNT\System32>nmap -vv -n -sT -p 1-65535 10.40.157.239Starting Nmap 4.00 ( http://www.insecure.org/nmap ) at 2008-09-16 11:15 Initiating ARP Ping Scan against 10.40.157.239 [1 port] at 11:15The ARP Ping Scan took 0.09s to scan 1 total hosts.Initiating Connect() Scan against 10.40.157.239 [65535 ports] at 11:15Discovered open port 22/tcp on 10.40.157.239Discovered open port 80/tcp on 10.40.157.239Discovered open port 443/tcp on 10.40.157.239Connect() Scan Timing: About 1.02% done; ETC: 12:04 (0:48:45 remaining)Discovered open port 642/tcp on 10.40.157.239Discovered open port 12345/tcp on 10.40.157.239Discovered open port 6481/tcp on 10.40.157.239Discovered open port 111/tcp on 10.40.157.239Discovered open port 623/tcp on 10.40.157.239The Connect() Scan took 2879.00s to scan 65535 total ports.Host 10.40.157.239 appears to be up ... good.Interesting ports on 10.40.157.239:(The 65527 ports scanned but not shown below are in state: filtered)PORT STATE SERVICE22/tcp open ssh80/tcp open http111/tcp open rpcbind443/tcp open https623/tcp open unknown642/tcp open unknown6481/tcp open unknown12345/tcp open NetBusMAC Address: 00:14:4F:97:B6:A1 (Sun Microsystems)Nmap finished: 1 IP address (1 host up) scanned in 2880.047 seconds Raw packets sent: 1 (42B) | Rcvd: 1 (42B)C:\WINNT\System32>