Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
EEPS | Engineered Edge Protection SystemsSpecialized Edge Protection & Falling Debris Systems Available Through Aluma Systems
The Value of Safety
The Cost of Fall Prevention Systems*
Aluma Systems (a BrandSafway Company) has an uncompromising determination to provide the highest standards of safety leadership. We comply with international codes of practice and frequently win awards for safety excellence from our customer base.
Safety and efficiency has been at our core, offering products and solutions to our formwork and general contractor customer base since 1972. We are pleased to add the Engineered Edge Protection Systems (EEPS) to our equipment portfolio as the request for safer, capable and more efficient practices are becoming the new standard.
500 LINEAR FEET OF FALL PROVENTION SYSTEM
ALUMA SYSTEMS EEPS
TYPICAL 2X4 LUMBER
TYPICAL 1/2” CABLE
MATERIAL $1,000.00 $765.63 $1,652.50
LABOR ($18/hr) $72.00 $6,750.00 $576.00
TOTAL $1,072.00 $7,515.63 $2,228.50
COST PER FOOT TO ERECT $2.14 $15.03 $4.46
WEEKLY MAINTENANCE $36.00 $362.00 $298.00
52 WEEK PROJECT $14,944.00 $26,339.63 $17,724.50
ANNUAL COST PER FOOT @ 500*
$29.89 $52.68 $35.45
REUSABLE
Zero Waste
Reduced Landfill Waste
EFFICIENCY
Quick install
Quick Connect System
No Damage or Drilling Concrete
Page 7
ACCESSIBILITY
One Gate Open Access
Stairs and Elevator Core
Page 10-13
*Estimated costs on 500 Linear feet at $18/hr
3
4
The designed and developed
EEPS Rapid Panel has been
engineered with longevity in mind.
In addition to the values that
this system brings, environmental
benefits and General Contractors
bottom line are becoming major
factors in the adoption
of Engineered Edge
Protection Systems as a
standard for fall prevention.
EEPS | Engineered Edge Protection Systems
RAPID PANEL
More than just a barrierThe EEPS Panels robust design ensures the system meets North American safety standards.
Our EEPS products are tested by Lloyds British test house to meet and exceed the test requirements set out in OSHA 1926.502.
5
PRODUCT CODE NA003
WEIGHT 47lbs
HEIGHT 3 ft 6 in
LENGTH 9 ft 6 in
INSTALLATION @9 ft ctr
PRODUCT CODE NA005
WEIGHT 32lbs
HEIGHT 3 ft 6 in
LENGTH 4 ft 7 in
INSTALLATION @4 ft 3” ctr
PRODUCT CODE NA004
WEIGHT 35lbs
HEIGHT 1 ft 9 in
LENGTH 9 ft 6 in
INSTALLATION @9’ ctr
PRODUCT CODE NA109
WEIGHT 3.25lbs
HEIGHT 42 in
LENGTH 9 ft 6 in
PRODUCT CODE NA110
WEIGHT 2.25lbs
HEIGHT 42 in
LENGTH 4 ft 7 in
Rapid Panels are shipped to
the project in stackable racks,
each holding 35 Rapid Panels.
Wind Loading Data Available On Request
STANDARD PANEL
HALF PANEL
EXTENSION PANEL
DEBRIS SOCK
HALF DEBRIS SOCK
PACKAGING OF PANELS
6
The innovative Rapid Post, with
its ease of installation and overall
performance, has become a
default safety solution for many
companies around the world.
EEPS | Engineered Edge Protection Systems
CONCRETE FRAME SOLUTIONS
Significant SavingsThe Aluma EEPS Rapid Post simplicity allows for maximum speed during erection and dismantle up to 10 times faster than traditional systems.
7
1. Up to ten times (10X) faster than traditional drill and fix systems
2. No tools required / No drill or fixings
3. Minimal training required
4. Fully compliant with OSHA1926.502
5. No penetration (Damage) of the concrete
6. Compression mechanism guaranteed for up to 2 million cycles
7. Safety device on post clearly indicates correct assembly
8. Single, double or full height edge protection for total enclosure
9. Rapid Post extends up to 11 ft 6”
10. Extend height by attaching Rapid Clamps
EEPS Rapid Post EXTRA (NA 002)
11. The NA 002 features the same benefits as the NA 001 Post except it can extend upwards of 14 ft
EEPS Rapid Post (NA 001)
NA
00
1 –
27
lbs
NA
00
2 –
35
lbs
THE RAPID POST
Add Rapid Clamps to Rapid
Post for extended height
PRODUCT CODE NA020
WEIGHT 2 lbs
Add Rapid Latches for full
height edge protection.
PRODUCT CODE NA021
WEIGHT 2 lbs
RAPID CLAMP
SHIPPING AND PACKAGING
RAPID LATCH
For ease of shipping, handling and protection of the Rapid
components, Rapid Posts and Rapid Accessories are
shipped in stackable racks and baskets.
1. 21” Extension Post with Rapid Latch and Rapid Pin
2. Support post, added to NA011 posts to enable extra height/reach of Rapid Panels
3. Used in conjunction with Dual Purpose Stand, Standard Support Post & Steel Frame Post.
Standard Support Post (NA 011)
4. 42” Standard Support Post with Rapid Latch and Rapid Pin.
5. Support post for Rapid Panels.Used in conjunction with Curb Grab, Slab Grab & Socket Bases
Extension Post for DPS (NA 012)
POST + EXTENSION ALTERNATIVES TO RAPID POSTS IN CONCRETE APPLICATIONS
8EDGE PROTECTION FEDERATION
epf RAPID-Edge Protection Systems Ltd.T: 0113 252 8883 | F: 0113 307 4990 | W: rapideps.comUNIT D TREEFIELD INDUSTRIAL ESTATE, GELDERD ROAD, GILDERSOME, LEEDS, LS27 7JU
2014 COPYRIGHT IN THIS DRAWING BELONGS TO RAPID EDGE PROTECTIONSYSTEMS LTD. AND SHOULD NOT BE COPIED OR SHOWN TO THIRD PARTIESWITHOUT THE EXPRESS PERMISSION OF RAPID EDGE PROTECTION SYSTEMS LTD.
PRODUCT DATA SHEET FOR
STANDARD SUPPORT POST
PRODUCT CODE NA011WEIGHT 8.8LBSCLOSED HEIGHT 43"
MATERIAL1.5" x 1.5" SQUARE HOLLOW SECTION.
FINISHGALVANISED.
COMPLIES WITHAMERICAN STANDARD OSHA 1926.502CANADIAN/ONTARIO STANDARD 213/91
NA0
11 -
STAN
DARD
SU
PPO
RT P
OSTRAPID-EPS
EDGE PROTECTION FEDERATION
epf
RAPID-EPS
RAPID-Edge Protection Systems Ltd.T: 0113 252 8883 | F: 0113 307 4990 | W: rapideps.comUNIT D TREEFIELD INDUSTRIAL ESTATE, GELDERD ROAD, GILDERSOME, LEEDS, LS27 7JU
2014 COPYRIGHT IN THIS DRAWING BELONGS TO RAPID EDGE PROTECTIONSYSTEMS LTD. AND SHOULD NOT BE COPIED OR SHOWN TO THIRD PARTIESWITHOUT THE EXPRESS PERMISSION OF RAPID EDGE PROTECTION SYSTEMS LTD.
PRODUCT DATA SHEET FOR
EXTENSION POST
PRODUCT CODE NA012WEIGHT 4.4LBSEXTRA HEIGHT 21"
FINISHGALVANISED.
COMPLIES WITHAMERICAN STANDARD OSHA 1926.502CANADIAN/ONTARIO STANDARD 213/91
NA0
12 -
EXTE
NSI
ON
PO
ST
21"
NA
012
– 4
lbs
NA
011
– 9
lbs
PRODUCT CODE NA007 / NA 007-EH
WEIGHT 13 lbs / 35 lbs
The Dual Purpose Stand has been fully tested
and proven to exceed North American safety
standards for edge protection/Fall Prevention.
• Installed in just minutes with two anchor bolts
• Available in standard and dual height options
• Up to 9 ft centers
• Galvanized finish
DUAL PURPOSE STAND
PRODUCT CODE NA008
WEIGHT 19 lbs
A fully tested solution where Rapid Post
or drill and fix solutions are precluded.
• Adjustable height on floor slabs:
4” - 30” in thickness
• Robust tensioning facility
• Install a safe working area in minutes
SLAB GRAB
PRODUCT CODE NA009
WEIGHT 19 lbs
This simple but very robust solution
uses the standard support post and
has been tested to exceed North
American safety standards.
• Robust tensioning facility
• Adjustment range 6 in - 21 in
• Allows installation in problematic
areas including bridge work and
parapets with upstands of up to 21 in.
CURB GRAB / PARAPETS CLAMP
NA
00
7 –1
3 lb
s
NA
00
7-EH
– 3
5 lb
s
FREE-STANDING & DEMARCATION APPLICATIONS
9
Pedestrian Segregation & Directional BarriersEnsure site visitors and operatives are safely directed away from potential hazardous areas by utilizing the simple pedestrian directional barrier solution.
• Quick and easy to use, the solution can be installed in minutes by assembling just three standard components.
DemarcationUtilizing the same three free standing components, safe enclosures used as waste disposal or storage areas can be created in just minutes.
• Free standing countered weighted Rapid Edge Protection can be installed quickly and easily by attaching the purpose designed ballast bracket to the flexible Hi-Vis Footplate.
• Free standing edge protection systems derive their support from weighted components fixed to additional supporting systems which can be positioned on flat surfaces within 6 ft 6” off the edge of a fall area.
• As with all Rapid systems, the free standing solution has been tested at the unique 9 ft centers.
Additional Site Demands FOOTPLATE
BALLAST BRACKET
PRODUCT CODE NA035
WEIGHT 7 lbs
Utilizing the Hi-Vis Footplate and
Standard Support Post, free standing
edge protection/fall prevention or
demarcation can be swiftly installed.
For use as a compliant edge
protection / fall prevention system,
suitable ballast blocks would be
secured to the HI-Vis Footplate.
PRODUCT CODE NA093
WEIGHT 4 lbs
With the use of the Ballast Bracket
and the required addition of ballast
blocks, brackets can be converted
to freestanding demarcation.
Example of a Demarcation
Example of a Pedestrian route
10
EEPS | Engineered Edge Protection Systems
STAIRCASE SOLUTIONS
ALL CONFIGURATIONSThe intelligence of the systems design allows for multiple configurations options for staircases and walkways
The innovative telescopic stair rail
system can provide fall protection
to the most challenging of areas.
With fail safe fittings, the solution
can be installed quickly by means
the rapid posts, clamps and dual-
purpose stands.
NA
031
– 1
5 lb
s
NA
034
– 1
1 lb
s
11
STAIRCASE ACCESSORIES & COMPONENTS
PRODUCT CODE NA010
WEIGHT 2 lbs
Can be installed on any concrete stair, either at
a precast stage using inserts, or by drilling and
installing at a later date.
THE CONCRETE SOCKET BASE (NA010)
We have a selection of Handrails spanning from
11” - 118” to accommodate any configuration.
SR0 NA078 2 lbs 11” (NOT TELESCOPIC)
SR1 NA060 2 lbs 15.4” - 17.3”
SR2 NA072 3 lbs 17.3” - 19.7”
SR3 NA073 4 lbs 19.7” - 23.2”
SR4 NA074 6 lbs 23.2” - 28.3”
SR5 NA033 7 lbs 31” - 45”
SR6 NA075 11 lbs 36.6” - 51”
SR7 NA032 15 lbs 51” - 78”
SR8 NA062 24 lbs 74.8” - 118”
The Stair Rail Connector Bracket
can be quickly installed on any rapid
post installed on a landing to provide
handrails when speed is a necessity.
PRODUCT CODE NA034
HANDRAILS
STAIRWELL CLAMP ADJUSTABLE STAIRWELL CONNECTOR BRACKET
PRODUCT CODE NA028 / NA029 / NA030
WEIGHT 9 lbs
There are 3 stairwell posts to suit
every eventuality.
The regular stairwell post (NA028) has a wedge
fitting on a single side and the left (NA029)
and right (NA030) posts have wedge fittings
facing out at 90 degrees.
STAIRWELL POSTS
NA
02
8 -
9 lb
s
NA
02
9 -
9 lb
s
NA
030
- 9
lbs
NA034
12
Using standard Rapid components,
in conjunction with an EEPS
Elevator Gate, a secure
enclosure can be built
to protect valuables
and control access.
EEPS | Engineered Edge Protection Systems
ELEVATOR PROTECTION
AN INNOVATIVE APPROACHUnlike any other system available to the construction industry, the unique Rapid Elevator Gate offers protection to multiple core openings with just one elevator gate.
The solution utilizes light but extremely robust and user friendly components that feature a secure key activated locking gate. Standard Rapid components such as the innovative Rapid Post and Panel are utilized when completely securing the protected areas.
There is no need for any penetration of the working surface; multiple lift shaft protection is completed in just minutes. As with all EEPS components, the Elevator Gate has been certificated by Lloyds British in line with OSHA 1926.502
13
1. Versatile – only one anchor required
2. Higher load capacity of the Rapid Cast-In Wall Anchor allows it
to be used for single and multiple personnel hook-ups
3. Eliminates the need to stock multiple types of products.
4. Heavy duty design
5. All steel body is resistant to breakage
6. Rapid Cast-In Wall Anchor can be positioned where required
Safer… Providing More Security
7. Reduces chance of unsafe installation
8. No slings, ladders or special requirements
9. Workers can always be tethered without being put at risk
10. Significantly stronger than traditional cast-in-place
nylon tether straps
Faster… Saves Time
11. Quick to install, no additional reinforcement or special
placing requirements
12. Simply nail or wire in-place at the desired location
EEPS Rapid Anchor (NA086)
Benefits
CAST-IN WALL ANCHOR*
SINGLE GATE CONFIGURATION
RAPID GATE
Barriers + Extensions can extend to top slab height
PRODUCT CODE NA086
WEIGHT 1.11 lbs
HORIZONTAL CABLES Caution must be exercised when the
Rapid Cast-In Wall Anchor is used
with horizontal cables due to the
amplification of the horizontal load
component at the point of attachment
to the structure. Small angles of sag
can impose large amplification of loads
at the attachment points.
When the Rapid Cast-In Wall Anchor is
used with horizontal cable applications,
a professional engineer must approve
the design and use prior to installation.
PRODUCT CODE NA040
WEIGHT 72 lbs
Design of the Rapid gate allows access and
egress while maintaining 100% tie-off
*
NA108 - 5 lbs
FORMWORK APPLICATIONS FOR FORMWORK CONTRACTORS
14
Wet Deck Post (NA108) for supporting Wet Deck Panel (NA107) and is inserted into formwork clamp NA036 & NA037. Quick Connect System eliminates tie-wires.
Our standard range includes brackets to fit onto most timber (NA036 & NA037) and aluminum (NA112) formwork systems.
• Wed Deck Panel (NA107) for use on Wet Deck. Extended height & toe board for use before and after concrete is poured. The 51” High Fence Panel maintains safe height above concrete pour.
FORMWORK ACCESSORIES
NA112 – 7 lbs
NA036 & NA037 - 7 lbs
NA107 - 18 lbs
Available for Aluma Beams
Significantly reduces damage The ease of use and large
collection of accessories make
this an edge protection product
of choice for many in
the construction industry.
EEPS | Engineered Edge Protection Systems
DEBRIS FAN SOLUTIONS
Product Description Debris Fan
Fan Widths 13 - 20 ft
Max Load Capacity 2300 lbs
Corrosion Protection Hot-dip galvanized
Relevant Standards Meets ANSI A10.11
Standard Connection Vertical post
Special Features l Lifting devicel Electric hoistl Collection of accessories
Debris Netting availability in two widths protects large ranges from 13-20 ft
Lifting mini-crane available in electric or hand and drill operations
2 layer corner fan spans 10 x 10 ft squared
Large collection of accessories
15
USA
Atlanta, GAT 404.699.0979
Fontana, CAT 909.440.0051
Tampa, FLT 813.626.1133
Baltimore, MDT 301.937.5090
Linden, NJT 732.396.1269
Antioch, ILT 847.838.4366
Sacramento, CAT 530.662.5245
Houston, TXT 281.860.1900
Seattle, WAT 425.251.0270
Aluma.comPhotos and diagrams are illustrative only. All products and equipment shall be used or
offered for sale only where permitted by law or governmental regulations, codes or
ordinances and shall be used in strict conformity therewith and for the purposes and in the
manner as may be prescribed therein and in conformity with safe practice. Specifications
of products and equipment shown herein are subject to change without notice.
Serious injury may result if you fail to use safe practice in the erecting, dismantling or use
of mast climbing work platforms, scaffolding, shoring and/or forming equipment. Erectors,
dismantlers and users must be familiar with and follow current laws and regulations, safe
practice and the Safety Rules and Instructions. Individuals using this equipment must be
instructed in these requirements. Safety Rules and Instructions pertaining to the products
shown herein are provided upon sale or rental of equipment. Additional copies or further
information shall be provided upon the customer’s request. It is important to note that
current OSHA regulations require the use of guardrail systems and/or fall-protection
devices at all working levels, open sides, and at all other openings on platforms and
work areas above certain heights, as specified by OSHA. In all cases, where a worker i
s exposed to a fall hazard in the use of this equipment, guardrail systems, where
appropriate, or other personal fall-protection devices, must be utilized. Means of access
must be made available by the customer to all locations where people are expected to
work. Materials for the provision of such means of access may be job-built by the
customer or, at the customer’s option, be obtained through Aluma Systems or other
suppliers. Aluma Systems will, at the customer’s request, consult on an alternative
means of access.