© 2010 Eaton Corporation. All rights reserved.

This is a photographic template – yourphotograph should fit precisely within this rectangle.

Eaton Enclosure Solutions

2 22

• A 19” enclosure is a cabinet, which has been designed to allow various 19” equipment to be mounted inside including:• Networking Infrastructure• Computers/Servers• Process and Control Equipment• Instrumentation• Telecommunication Equipment• Broadcast Equipment• General Electrical Accessories

What is a 19” Enclosure?

3 33

19” enclosures provide:• Security• Space Saving• Physical Protection• Aesthetics• Suitable Environment• Manageability• Flexibiliity• Expandable installation• Peace of mind

Why have a 19” Enclosure?

4 44

451mm

1U=44.45mm

465mm

1U=44.45mm

What are ‘U’?

5 55

U

mmmm

• The width and depth of an enclosure is always measured in millimetres

• The height of an enclosure is measured in U space, for example:• 600mm x 1000mm x 42U

Note: If an enclosure is specified as 42U, it has the capability to house 42U of IT equipment

Why ‘U’ are important

6 66

Roof PlatePerforated Door19” Rail MountsHorizontal StabilizersAdjustable Feet/Castors

Cage (Captive) Nuts

Plinth

Enclosure Terminology

7 77

Baying• You can expand your

system of racks by joining them together

• Enclosures can be bayed with or without sidewalls

• Baying enclosures does not provide any additional stability

Enclosure Terminology

© 2010 Eaton Corporation. All rights reserved.

This is a photographic template – yourphotograph should fit precisely within this rectangle.

Eaton Enclosure

9 9

Features• Universal server platform (EIA 310-D Type 2,

IEC-60297-2)• Perforated doors (71% airflow)• 19” Adjustable rails front and rear • Split Rear Doors• Five-stage iron-phosphate pre-treatment with

textured powder coat finish• Cable entry knock-outs in roof• Swing-type handles with key lock insert• Leveling feet• Two piece lockable sidewalls• Castors

9

Eaton Enclosure Overview

10 10

• Load capacity• 1,000kg static load• 1,200kg with middle side brace

• Black powder-coat finish• Tested to 500 hours salt spray under

ASTM-D610-01 and ASTM B117

• Packaging• Flat-pack (one box) – requires assembly• Four Pack (four boxes) – requires

assembly• Assembled – shipped bolted to pallet • Components – for factory assembly

10

Eaton Enclosure Overview

11 11

Eaton Enclosure - Sizes

• 42U• 600mm wide, 1000mm deep• 600mm wide, 1200mm deep• 800mm wide, 1000mm deep

12 12

• Cable Management• 1U Cable Manager• 2U Cable Manager

• Castor Kit• Document Wallet• Bating Kit• Hardware Kit

• 50 x M6 Cage Nuts• 50 x M6 Screws• 50 x Plastic Washers

• Shelves• 2U Light Equipment Shelf• Vented Fixed Shelf• Telescopic Shelf

12

Eaton Enclosure Accessories

13 13