Catalog of thermoplastic hose for hydraulic, paint spray, sewer cleaning, sewer jetting, miniature, pneumatic, gas, lubrication, and robotics applications. Catalog also has metric and nonmetric barbed fittings and hydraulic crimper.
DYNA FLEX Thermoplastic Hose Catalog TABLE OF
CONTENTSDESCRIPTION Thermoplastic Hose SpecificationsSAE100R7.3
(single line, non-conductive, twinline) SAE100R8.7 (single line,
non-conductive, twinline) Sewer Jetting. 11 Sewer Cleaning 12 Paint
Spray 3300 PSI 1 braid.. 13 Paint Spray 3300 PSI 2 braid.. 14 Paint
Spray 5000-6000 PSI.. 15 Print Catalog Request Form..16
PAGE
Pneumatic and Non-Conductive hose Specifications .....17
DYNA FLEX
SAE 100R7711 (BLACK)
Recommended For: Medium pressure hydraulic and pneumatic
systems. Meets or exceeds SAE 100R7 requirements. For pneumatic
systems use perforated (pin-pricked) hose. Innercore: Synthetic oil
resistant polyester tube Reinforcement: Braided high tensile
synthetic fiber Cover: Black high abrasion resistant polyurethane
Temperature Range: -65 degrees F. to +212 degrees F. (-54 degrees
C. to +100 degrees C.) Hose Part No.701-02* 711-03 711-04 711-05
711-06 711-08 711-12 711-16
Nominal I.D. In.1/8 3/16 1/4 5/16 3/8 1/2 3/4 1
Nominal O.D. In..305 .405 .505 .585 .645 .810 1.11 1.42
Maximum Oper. Press. PSI3,000 3,250 3,000 2,500 2,250 2,000
1,250 1,000
Minimum Burst Press. PSI12,000 13,000 12,000 10,000 9,000 8,000
5,000 4,000
mm.3.18 4.76 6.35 7.94 9.53 12.70 19.05 25.40
mm.7.75 10.29 12.83 14.86 16.38 20.57 28.19 36.07
BAR207 224 207 172 155 138 86 69
Min. Bend Radius BAR (In.)827 896 827 689 620 552 345 276 1/2
3/4 1-1/4 1-3/4 2 3 9-1/2 12
Wgt. Per 100 Ft. (Lbs.)2.5 5.5 7.0 10.0 10.5 15.0 29.0 40.0
* 1/8 I.D. does not apply to SAE100R7
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060
U.S.A. PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440)
946-4620 Web Site: www.dynaflexinc.com E-Mail:
[email protected]
DYNA FLEX
SAE 100R77110 (ORANGE) NON-CONDUCTIVE
Recommended For: Medium pressure hydraulic and pneumatic
systems. Meets or exceeds SAE 100R7 requirements. For pneumatic
systems, use perforated (pin-pricked) hose. Innercore: Synthetic
oil resistant polyester tube Reinforcement: Braided high tensile
synthetic fiber Cover: Orange non-conductive high abrasion
resistant polyurethane Temperature Range: -65 degrees F. to +212
degrees F. (-54 degrees C. to +100 degrees C.) Hose Part
No.7010-02* 7110-03 7110-04 7110-05 7110-06 7110-08 7110-12
7110-16
Nominal I.D. In.1/8 3/16 1/4 5/16 3/8 1/2 3/4 1
Nominal O.D. In..305 .405 .505 .585 .645 .810 1.11 1.42
Maximum Oper. Press. PSI3,000 3,250 3,000 2,500 2,250 2,000
1,250 1,000
Minimum Burst Press. PSI12,000 13,000 12,000 10,000 9,000 8,000
5,000 4,000
mm.3.18 4.76 6.35 7.94 9.53 12.70 19.05 25.40
mm.7.75 10.29 12.83 14.86 16.38 20.57 28.19 36.07
BAR207 224 207 172 155 138 86 69
Min. Bend Radius BAR (In.)827 896 827 689 620 552 345 276 1/2
3/4 1-1/4 1-3/4 2 3 9-1/2 12
Wgt. Per 100 Ft. (Lbs.)2.5 5.5 7.0 10.0 10.5 15.0 29.0 40.0
* 1/8 I.D. does not apply to SAE100R7
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060
U.S.A. PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440)
946-4620 Web Site: www.dynaflexinc.com E-Mail:
[email protected]
DYNA FLEX
SAE 100R7 TWIN-LINE711T (BLACK) TWIN-LINE
Recommended For: Medium pressure hydraulic and pneumatic
systems. Meets or exceeds SAE 100R7 requirements. For pneumatic
systems, use perforated (pin-pricked) hose. Innercore: Synthetic
oil resistant polyester tube Reinforcement: Braided high tensile
synthetic fiber Cover: Black high abrasion resistant polyurethane
Temperature Range: -65 degrees F. to +212 degrees F. (-54 degrees
C. to +100 degrees C.) Hose Part No.711-03T 711-04T 711-06T
711-08T
Nominal I.D. In.3/16 1/4 3/8 1/2
Nominal O.D. In..400 .505 .645 .810
Maximum Oper. Press. PSI3,250 3,000 2,250 2,000
Minimum Burst Press. PSI13,000 12,000 9,000 8,000
mm.4.76 6.35 9.53 12.70
mm.10.16 12.83 16.38 20.57
BAR224 207 155 138
Min. Bend Radius BAR (In.)896 827 620 552 3/4 1-1/4 2 3
Wgt. Per 100 Ft. (Lbs.)11 14 21 30
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060
U.S.A. PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440)
946-4620 Web Site: www.dynaflexinc.com E-Mail:
[email protected]
DYNA FLEX
SAE 100R8 TWIN-LINE
8110T (ORANGE) NONCONDUCTIVE TWIN-LINE
Recommended For: Medium pressure hydraulic and pneumatic
systems. Meets or exceeds SAE 100R8 requirements. For pneumatic
systems use perforated (pin-pricked) hose. Innercore: Synthetic oil
resistant polyester tube Reinforcement: Braided high tensile aramid
fiber Cover: Orange high abrasion resistant polyurethane
Temperature Range: -65 degrees F. to +212 degrees F. (-54 degrees
C. to +100 degrees C.) Hose Part No. Nominal I.D. In.8110-03T
8110-04T 8110-06T 8110-08T
Nominal O.D. In. mm.
Maximum Oper. Press. PSI
mm.
Minimum Min. Burst Press. Bend Radius (In.) BAR PSI BAR345 345
276 241 20,000 20,000 16,000 14,000 1397 1379 1103 965 3/4 1-1/4 2
3
Wgt. Per 100 Ft. (Lbs.)5.5 7.0 10.5 15.0
3/16 4.76 1/4 6.35 3/8 9.53 1/2 12.70
.390 9.91 5,000 .480 12.19 5,000 .645 16.38 4,000 .810 20.57
3,500
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060
U.S.A. PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440)
946-4620 Web Site: www.dynaflexinc.com E-Mail:
[email protected]
DYNA FLEX
SAE 100R8811 (BLACK)
Recommended For: Medium pressure hydraulic and pneumatic
systems. Meets or exceeds SAE 100R8 requirements. For pneumatic
systems use perforated (pin-pricked) hose. Innercore: Synthetic oil
resistant polyester tube Reinforcement: Braided high tensile aramid
fiber Cover: Black high abrasion resistant polyurethane Temperature
Range: -65 degrees F. to +212 degrees F. (-54 degrees C. to +100
degrees C.) Hose Part No. Nominal I.D. In.811-03 811-04 811-06
811-08
Nominal O.D. In. mm.
Maximum Oper. Press. PSI
mm.
Minimum Min. Burst Press. Bend Radius (In.) BAR PSI BAR345 345
276 241 20,000 20,000 16,000 14,000 1397 1379 1103 965 3/4 1-1/4 2
3
Wgt. Per 100 Ft. (Lbs.)5.5 7.0 10.5 15.0
3/16 4.76 1/4 6.35 3/8 9.53 1/2 12.70
.390 9.91 5,000 .480 12.19 5,000 .645 16.38 4,000 .810 20.57
3,500
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060
U.S.A. PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440)
946-4620 Web Site: www.dynaflexinc.com E-Mail:
[email protected]
DYNA FLEX
SAE 100R8 TWIN-LINE
8110T (ORANGE) NONCONDUCTIVE TWIN-LINE
Recommended For: Medium pressure hydraulic and pneumatic
systems. Meets or exceeds SAE 100R8 requirements. For pneumatic
systems use perforated (pin-pricked) hose. Innercore: Synthetic oil
resistant polyester tube Reinforcement: Braided high tensile aramid
fiber Cover: Orange high abrasion resistant polyurethane
Temperature Range: -65 degrees F. to +212 degrees F. (-54 degrees
C. to +100 degrees C.) Hose Part No. Nominal I.D. In.8110-03T
8110-04T 8110-06T 8110-08T
Nominal O.D. In. mm.
Maximum Oper. Press. PSI
mm.
Minimum Min. Burst Press. Bend Radius (In.) BAR PSI BAR345 345
276 241 20,000 20,000 16,000 14,000 1397 1379 1103 965 3/4 1-1/4 2
3
Wgt. Per 100 Ft. (Lbs.)5.5 7.0 10.5 15.0
3/16 4.76 1/4 6.35 3/8 9.53 1/2 12.70
.390 9.91 5,000 .480 12.19 5,000 .645 16.38 4,000 .810 20.57
3,500
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060
U.S.A. PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440)
946-4620 Web Site: www.dynaflexinc.com E-Mail:
[email protected]
DYNA FLEX
SAE 100R88110 (ORANGE) NONCONDUCTIVE
Recommended For: Medium pressure hydraulic and pneumatic
systems. Meets or exceeds SAE 100R8 requirements. For pneumatic
systems use perforated (pin-pricked) hose. Innercore: Synthetic oil
resistant polyester tube Reinforcement: Braided high tensile aramid
fiber Cover: Orange high abrasion resistant polyurethane
Temperature Range: -65 degrees F. to +212 degrees F. (-54 degrees
C. to +100 degrees C.) Hose Part No. Nominal I.D. In.8110-03
8110-04 8110-06 8110-08
Nominal O.D. In. mm.
Maximum Oper. Press. PSI
Minimum Burst Press. BAR1397 1379 1103 965
Min. Bend Radius (In.)3/4 1-1/4 2 3
mm.
BAR PSI345 345 276 241 20,000 20,000 16,000 14,000
Wgt. Per 100 Ft. (Lbs.)5.5 7.0 10.5 15.0
3/16 4.76 1/4 6.35 3/8 9.53 1/2 12.70
.390 9.91 5,000 .480 12.19 5,000 .645 16.38 4,000 .810 20.57
3,500
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060
U.S.A. PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440)
946-4620 Web Site: www.dynaflexinc.com E-Mail:
[email protected]
DYNA FLEX
SAE 100R8 TWIN-LINE811T (BLACK) TWIN-LINE
Recommended For: Medium pressure hydraulic and pneumatic
systems. Meets or exceeds SAE 100R8 requirements. For pneumatic
systems use perforated (pin-pricked) hose. Innercore: Synthetic oil
resistant polyester tube Reinforcement: Braided high tensile aramid
fiber Cover: Black high abrasion resistant polyurethane Temperature
Range: -65 degrees F. to +212 degrees F. (-54 degrees C. to +100
degrees C.) Hose Part No. Nominal I.D. In.811-03T 811-04T 811-06T
811-08T
Nominal O.D. In. mm.
Maximum Oper. Press. PSI
mm.
Minimum Min. Burst Press. Bend Radius (In.) BAR PSI BAR345 345
276 241 20,000 20,000 16,000 14,000 1397 1379 1103 965 3/4 1-1/4 2
3
Wgt. Per 100 Ft. (Lbs.)5.5 7.0 10.5 15.0
3/16 4.76 1/4 6.35 3/8 9.53 1/2 12.70
.390 9.91 5,000 .480 12.19 5,000 .645 16.38 4,000 .810 20.57
3,500
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060
U.S.A. PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440)
946-4620 Web Site: www.dynaflexinc.com E-Mail:
[email protected]
DYNA FLEX
SEWER JETTINGSWRB (BLACK)
Recommended For: Use on high pressure sewer cleaning and jetting
equipment. Innercore: Seamless polyester elastomer tube
Reinforcement: Braided high tensile aramid fiber Cover: Black high
abrasion resistant polyurethane Temperature Range: -40 degrees F.
to +122 degrees F. (-40 degrees C. to +50 degrees C.) Hose Part No.
Nominal I.D. In.SWRB-03 SWRB-04 SWRB-06 SWRB-08 3/16 1/4 3/8
1/2
Nominal O.D. In..390 .480 .645 .810
Minimum Maximum Oper. Press. Burst Press. PSI5,000 5,000 4,000
4,000
mm.4.76 6.35 9.53 12.70
mm.9.91 12.19 16.38 20.57
BAR345 345 276 241
PSI20,000 20,000 16,000 14,000
Min. Bend Radius BAR (In.)1397 1379 1103 965 3/4 1-1/4 2 3
Wgt. Per 100 Ft. (Lbs.)5.5 7.0 10.5 15.0
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060
U.S.A.
PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440)
946-4620 Web Site: www.dynaflexinc.com E-Mail:
[email protected]
DYNA FLEX
SEWER CLEANING HOSESWRO (ORANGE)
Recommended For: Use on high pressure sewer cleaning and jetting
equipment. Innercore: Orange, seamless elastomer tube
Reinforcement: Braided high tensile synthetic fiber Cover: Orange
high abrasion resistant polyurethane Temperature Range: -40 degrees
F. to +122 degrees F. (-40 degrees C. to +50 degrees C.) Hose Part
No. Nominal I.D. In.SWRO-12 SWRO-16 3/4 1
Nominal O.D. In.1.11 1.42
Maximum Minimum Oper. Press. Burst Press. PSI2,500 2,500
mm.19.05 25.40
mm.28.19 36.07
BAR172 172
PSI6,250 6,250
Min. Bend Radius BAR (In.)431 431 9-1/2 12
Wgt. Per 100 Ft. (Lbs.)29.0 40.0
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060
U.S.A.
PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440)
946-4620 E-Mail: [email protected] Web Site:
www.dynaflexinc.com
DYNA FLEX
PAINT SPRAY7100 (NU-BLU)
Recommended For: Use in Airless/Wireless paint spray
applications Innercore: Nylon (Flexible) Reinforcement: Braided
high tensile conductive synthetic fiber Cover: Blue high abrasion
resistant polyurethane Temperature Range: -65 degrees F. to +212
degrees F. (-54 degrees C. to +100 degrees C.) Hose Part No.
Nominal I.D. In.7100-03 7100-04 7100-06 7100-08 3/16 1/4 3/8
1/2
Nominal O.D. In..405 .505 .645 .810
Maximum Oper. Press. PSI3,300 3,300 3,300 2,000
mm.4.76 6.35 9.53 12.70
mm.10.29 12.83 16.38 20.57
BAR227 227 227 138
Min. Bend Radius (In.)3/4 1-1/4 2 3
Wgt. Per 100 Ft. (Lbs.)5.5 7.0 10.5 15.0
NOTE: Paint spray hose is furnished only as a completed
assembly. Hose will be coiled and cut to length specified by
customer. All hose assemblies come complete with hose ends, spring
guards and Warning Tags. NOT TO BE USED WITH PUMPS OR EQUIPMENT
THAT EXCEED THE MAXIMUM OPERATING PRESSURE. PHONE: (440) 946-0719
TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site:
www.dynaflexinc.com E-Mail: [email protected]
DYNA FLEX
PAINT SPRAY7102 (HI NU-BLUE TWO)
Recommended For: Use in Airless/Wireless paint spray
applications Innercore: Nylon (Flexible) Reinforcement: Two braids
high tensile conductive synthetic fiber Cover: Blue high abrasion
resistant polyurethane Temperature Range: -65 degrees F. to +212
degrees F. (-54 degrees C. to +100 degrees C.) Hose Part No.
Nominal I.D. In.7102-03 7102-04 7102-06 7102-08 3/16 1/4 3/8
1/2
Nominal O.D. In..405 .505 .645 .810
Maximum Oper. Press. PSI3,300 3,300 3,300 2,000
mm.4.76 6.35 9.53 12.70
mm.10.29 12.83 16.38 20.57
BAR227 227 227 138
Min. Bend Radius (In.)3/4 1-1/4 2 3
Wgt. Per 100 Ft. (Lbs.)5.5 7.0 10.5 15.0
NOTE: Paint spray hose is furnished only as a completed
assembly. Hose will be coiled and cut to length specified by
customer. All hose assemblies come complete with hose ends, spring
guards and Warning Tags. NOT TO BE USED WITH PUMPS OR EQUIPMENT
THAT EXCEED THE MAXIMUM OPERATING PRESSURE. PHONE: (440) 946-0719
TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site:
www.dynaflexinc.com E-Mail: [email protected]
DYNA FLEX
PAINT SPRAY8100 (SUPR-NU SPRAY)
Recommended For: Use in Airless/Wireless paint spray
applications. Lighter than comparable wire reinforced paint spray
hoses. Innercore: Nylon (Flexible) Reinforcement: Braided high
tensile conductive aramid fiber Cover: Red high abrasion resistant
polyurethane Temperature Range: -65 degrees F. to +212 degrees F.
(-54 degrees C. to +100 degrees C.) Hose Part No. Nominal I.D.
In.8100-03 8100-04 8100-06 8100-08 3/16 1/4 3/8 1/2
Nominal O.D. In..390 .480 .645 .810
Maximum Oper. Press. PSI6,000 6,000 5,000 3,500
mm.4.76 6.35 9.53 12.70
mm.9.19 12.19 16.38 20.57
BAR413 413 345 241
Min. Bend Radius (In.)3/4 1-1/4 2 3
Wgt. Per 100 Ft. (Lbs.)5.5 7.0 10.5 15.0
NOTE: Paint spray hose is furnished only as a completed
assembly. Hose will be coiled and cut to length specified by
customer. All hose assemblies come complete with hose ends, spring
guards and Warning Tags. NOT TO BE USED WITH PUMPS OR EQUIPMENT
THAT EXCEED THE MAXIMUM OPERATING PRESSURE. DYNA FLEX, INC. 7300
INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A. PHONE: (440)
946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site:
www.dynaflexinc.com E-Mail: [email protected]
2006 Hose Catalog request form Company Name:
____________________________________ Address:
__________________________________________ City:
_____________________________________________ State:
_______________________ Zip: _________________ Phone:
_______________________FAX _________________ E-mail:
___________________________________________ Name:
____________________________________________ Number of catalogs
requested: _______________ Dyna Flex Inc. Updates: New Products,
Specials, Pricing Please select how you would like to receive
updates Fax E-mail Dyna Flex Inc. will mail catalog(s) upon Receipt
of signed catalog request form. Signature:
______________________________ Date: __________
Dyna Flex Inc. 7300 Industrial Park Blvd., Mentor, Oh 44060
Phone: 800-525-8463 Fax: 440-946-4620 E-mail: [email protected]
www.dynaflexinc.com
DYNA FLEX
Thermoplastic Hose and Fittings
Air and Pneumatic Applications:All hose assemblies should be
perforated (pin-pricked) before being used in an air or gaseous
application. This permits any gas that has migrated through the
inner core to escape through the cover and into the atmosphere
without causing damage to the hose. Please notify our sales staff
if this is a requirement for your particular hose application.
Hose Conductivity & Non-Conductivity:Exercise caution when
routing hydraulic hose by an electrical source. If you are close to
an electrical source we highly recommend using Dyna Flex Inc.
orange non-conductive hose.
Special Requirements:Hoses can be designed and constructed to
meet your specific engineering needs. Please consult our sales
staff for details
