> DUAL PUMP SUBMERSIBLE CONTROLLER

For more information give us a call on +613 9525 3844 for all your expert needs

Easy to install, Dual sump pump protection

The Auto Alternating Dual Submersible Pump Controller is specifically designed for use in sewerage, waste and storm water pumping stations.

Designed to be added to larger domestic, commercial and industrial dual pump pits. The system monitors the level of your pit by auto alternating (swapping) the pumps to get a regular run in low flow, and operating both pumps at times of high flow.

PumpmatiX’s Dual Submersible Pump Control Panel is engineered to ensure the state-of-the-art technology is extremelyreliable, coming with numerous pump protection and alarm features.

Note: Control panel recommended to be installed by a licensed electrician

Dual PumpOperation

In Peak Demands

Made to Australian Standards for Plumbing

and Electrical

Pump OverloadProtection

Auto/Off/ManualPump Selection

High & Low LevelAlarm

LED FunctionIndicators

Single PumpAlternatingOperation

7 Day Anti-SeizeProtection

The Pumpmatix Dual Pump Controller is a simplified system that requires minimum connections to ensure easy use.

LOW LEVEL ALARM

SINGLE PUMP AUTO ALTERNATING

BOTH PUMPS

HIGH LEVEL ALARM

Float Voltage (Low): 5V DC Internally Supplied

Voltage Free Contacts: (BMS)NO/C Rated 240V Max 10amps

Power SupplyVoltage Op ons: 240V/415V/480V - 50Hz

Visual DisplayLED: Power On, High or Low Level AlarmPump 1 & 2 Run, Auto/Off/ManualSingle Pump Alterna ng Opera ngDual Pumps Opera ng Flashing Strobe on all faults

Audible Alarm FeaturesScreamer: 95dB on all faultsManual mute bu onAutoma cally mutes in five minutesChirps every one hour

Technical Data

Op onal ExtrasHydrosta c Level Control, So Starters

EnclosureType:Material:Dimensions:

Supplied in a IP55 enclosureABS Plas c (Indoor use only)

290 x 290 x 180mmMaterial:Dimensions:

Metal Enclosure400 x 500 x 250mm

Overload Protec on: Electronic or Themal Overloads

> HYDROSTATIC LEVEL PROBES

DTB’s submersible hydrostatic level probes are engineered to ensure the state-of-the art technology is extremely reliable, coming with numerous pump protection and alarm features.

PROGRAMMABLELEVEL SETTINGS

WORKINGLEVEL DISPAY

RE - TRANSMIT4 to 20ma

(BMS)

RELIABLE INCOMMERCIAL

INSTALLATIONS

CAN BE USED IN :GREASY + HIGH TEMP

INSTALLATIONS

CAN BE USED IN :CONCENTRATED SEWERAGE

SOLIDS INSTALLATIONS

CAN BEINTEGRATED IN TO

SUBMERSIBLE SEWERAGECONTROLLERS

VERY ACCURATE LEVEL READING

DTB INTERNATIONAL PUMPING PTY. LTD.

DTB International Pumping manufactures award winning pump systems and engineering products to meet yourspecialised needs. With years of experience DTB prides itself on high quality reliable products that you can trust. To prve our commitment to our customers we provide 24 hour on site service and support for the life of the system.

For more information get in touch with us at www.dtbpumps.com.auor give us a call on +613 9525 3844 for all your expert needs

Hydrostatic Probe :

The pressure transmitter of the probe converts the level proportional hydrostatic pressure to a standard 4 to 20mA signal.

Standard Features :

> Accuracy 0.3%> Long-term stability 0.2% / 12 months> Corrosion - resistant materials> Stainless steel housing> PE / FEP halogen free sheath cabling> Measuring range from 2 to 20m

<<

HYDROSTATIC LEVEL PROBES FEATURES

> SINGLE SUBMERSIBLE PUMP CONTROLLER

Easy to install, single sump pump protection

The Single Submersible Pump Controller is specifically designed for use in sewerage, waste and stormwater pumping stations.

Designed to run commercial or industrial single pump pits. Operating your pump and monitoring the pump pit for a high level of liquid and for pump faults to ensure damage is prevented.

It combines automatic level control, level indication, pump protection and level alarms with a simple operator interface.

PumpmatiX’s submersible pump control panels are engineered to ensure the state-of-the-art technology is extremelyreliable, coming with numerous pump protection and alarm features.

ABS /Metal Enclosure

OptionalSoft Starter

Pump Overload Protection

Auto/Off/Manual Pump Selection

High Level Alarm

LED FunctionIndicators

Optional Hydrostatic Probe

7 Day Anti-Seize Protection

The Pumpmatix Single Pump Controller is a simplified system that requires minimum connections to ensure easy use.

HIGH LEVEL ALARM

SINGLE PUMP OPERATION

Note: Control panel recommended to be installed by a licensed electrician

Float Voltage (Low): 5V DC Internally Supplied

Voltage Free Contacts: (BMS)NO/C Rated 240V Max 10amps

Power SupplyVoltage Op ons: 240V/415V/480V - 50Hz

Visual DisplayLED: Power On, High Level AlarmPump Run, Auto/Off/ManualFlashing Strobe on all faults

Audible Alarm FeaturesScreamer: 95dB on all faultsManual mute bu onAutoma cally mutes in five minutesChirps every one hour

Technical Data

Op onal ExtrasHydrosta c Level Control, So Starters

EnclosureType:Material:Dimensions:

Supplied in a IP55 enclosureABS Plas c (Indoor use only)

240 x 190 x 140mmMaterial:Dimensions:

Metal Enclosure300 x 400 x 250mm

Overload Protec on: Electronic or Themal Overloads

For more information get in touch with us at www.dtbpumps.com.au or give us a call on +613 9525 3844 for all your expert needs

> HIGH LEVEL ALARM

For more information give us a call on +613 9580 3449 for all your expert needs

Easy to install, indoor or outdoor high level alarm

The pump pit high level alarm monitors water levels in pump pits, storm water drains, tanks, pump chambers, sewerage and other types of water pump systems.

Designed to be added to simple pump pits with a small automatic pump to detect a high level of liquid in your pit. It will automatically alert you of problems with the system through an audio-visual alarm.

It combines automatic level control, level indication and level alarms with a simple operator interface.

Power Supply

Display

Enclosure

Voltage Range

Current:

LED Power On:Flashing LED

Type:Material:Dimensions:

: 240V/50Hz(double insulated)

300mA

Indica on: High Level

Supplied in a IP55 enclosureABS

140 x 150 x 75mm

Technical Data

The PumpmatiX high level alarmis a simple and easy to install

system with a plug in and play controller.

Typical High LevelFloat Switch

Water Level

Wall MountedHigh Level AlarmPanel

PumpmatiX’s submersible pump control panels are engineered to ensure the state-of-the-art technology is extremelyreliable, coming with numerous pump protection and alarm features.

Note: Control panel recommended to be installed by a licensed electrician

Plug In an Play

Automatic Alarm Mute

Hourly Alarm Chirp240V Power Supply

High Level Alarm

ABS Enlosure

Function Indicators (LED)Flashing Strobe (LED)

Float Voltage (Low): 5V DC Internally Supplied

Voltage Free Contacts: (BMS)NO/C Rated 240V Max 10amps

Audible Alarm FeaturesScreamer: 95dBManual mute bu onAutoma cally mutes in five minutesChirps every one hour