Upload
esgon
View
212
Download
0
Embed Size (px)
DESCRIPTION
http://www.esgon-ce.es/files/Deep/dse8610-data-sheet.pdf
Citation preview
DSE8610AUTO START LOAD SHARE MODULE
DSEGenset
®
The DSE8610 is an easy to usemulti-generator loadshare system,designed to synchronise up to 32generators including electronic andnon-electronic engines.
The DSE8610 monitors thegenerator and indicates operationalstatus and fault conditions,automatically starting or stoppingthe engine on load demand or faultcondition.
System alarms are annunciated onthe LCD screen (multiple languageoptions available), illuminated LEDand audible sounder.
The event log will record 250 eventsto facilitate easy maintenance. Anextensive number of fixed andflexible monitoring, metering andprotection features are included as well as comprehensivecommunication and systemexpansion options.
Using the DSE PC ConfigurationSuite Software allows easyalteration of the operationalsequences, timers and alarms. Withall communication ports capable ofbeing active at the same time, theDSE8610 is ideal for a wide varietyof demanding load shareapplications.
KEY LOAD SHARE FEATURES:• Peak lopping• Sequential set start• Manual voltage/frequencyadjustment
• R.O.C.O.F. and vector shift• Generator load demand• Automatic hours run balancing• Mains (Utility) de-coupling• Mains (Utility) de-couplingtest mode
• Dead bus sensing• Bus failure detection• Direct governor and AVR control• Volts and frequency matching• kW and kV Ar load sharing
FEATURES
ENVIRONMENTAL TESTING STANDARDS
ELECTRO MAGNETIC COMPATIBILITYBS EN 61000-6-2EMC Generic Immunity Standard for theIndustrial EnvironmentBS EN 61000-6-4EMC Generic Emission Standard for theIndustrial Environment
ELECTRICAL SAFETYBS EN 60950Safety of Information Technology Equipment,including Electrical Business Equipment
TEMPERATUREBS EN 60068Ab/Ae Cold Test -30oCBS EN 60068-2-2Bb/Be Dry Heat +70oC
VIBRATIONBS EN 60068-2-6Ten sweeps in each of three major axes5Hz to 8Hz @ +/-7.5mm, 8Hz to 500Hz @ 2gn
HUMIDITYBS EN 60068-2-30Db Damp Heat Cyclic 20/55oC @ 95% RH 48 HoursBS EN 60068-2-78Cab Damp Heat Static 40oC @ 93% RH 48 Hours
SHOCKBS EN 60068-2-27Three shocks in each of three major axes15gn in 11mS
DEGREES OF PROTECTIONPROVIDED BY ENCLOSURESBS EN 60529IP65 - Front of module when installed into thecontrol panel with the supplied sealing gasket.
COMPREHENSIVE FEATURE LIST TO SUIT A WIDE VARIETYOF LOAD SHARE APPLICATIONS
1ph2ph3phN
DSE2131DSE2133DSE2152DSE2130DSE2157DSE2548
2 1ph2ph3phN
1ph2ph3phN
RS232 ANDRS485
DSENET®
EXPANSIONUSBPORT
USBHOST
CONFIGURABLEINPUTS
DC OUTPUTS ANALOGUESENDERS
EMERGENCY STOP
DC POWER SUPPLY 8-35V
DSE86107
OTHER
D +W/L
ETHERNET
11
232 485
6 4
PCMODBUSMODEM
BUSSENSING
VOLT FREEOUTPUTS
GENERATOR SENSING CHARGEALTERNATOR
ELECTRONIC ENGINES
MAGNETICPICK-UP
VOLTSCURRENT
+
+
ISSUE 3
MSC
8610 8610 8660
DEUTZISUZUPERKINSCATERPILLARMTUVOLVOCUMMINSSCANIA
FUEL & CRANKOUTPUTSFLEXIBLE WITH CAN
DEEP SEA ELECTRONICS PLC UKHighfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PHTELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303EMAIL [email protected] WEBSITE www.deepseaplc.com
DEEP SEA ELECTRONICS INC USA3230 Williams Avenue, Rockford, IL 61101-2668 USATELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708EMAIL [email protected] WEBSITE www.deepseausa.com
055-083/12/11 (3)
KEY FEATURES• Comprehensive loadsharecapabilities
• Configurable inputs (11)• Configurable outputs (8)• Voltage measurement• Built-in governor and AVRcontrol
• kW overload alarms• Comprehensive electricalprotection
• Magnetic pick-up• Electronic engine capability • RS232 & RS485 remotecommunications
• Modbus RTU • PLC functionality• Multi event exercise timer • Back-lit LCD 4-line text display• Multiple display languages• Automatic start/Manual start• Audible alarm• Reduced file transfer time
• Fixed and flexible LED indicators • Event log (250)• Engine protection• Fault condition notification to a designated PC
• Protected front panelprogramming
• PC configuration• Fully configrable • SMS alert messaging• Compatible with DSE8700 Series
KEY BENEFITS• RS232 & RS485 can be used at the same time
• DSENet connection forsystem expansion
• PLC functionality• Auto voltage sensing • Five step dummy load support• Five step load shedding support• High number of inputs andoutputs
• Worldwide language support• Configuration Suite PC software• Direct USB connection to PC• Ethernet monitoring• USB host• Data logging & trending
EXPANSION DEVICES• DSE2131 Ratiometric InputExpansion Module
• DSE2133 RTD/ThermocoupleInput Expansion Module
• DSE2152 Analogue OutputExpansion Module
• DSE2548 LED ExpansionModule
• DSE2130 Input ExpansionModule
• DSE2157 Output ExpansionModule
• DSE124 CAN/MSC Extender
RELATED MATERIALSTITLE PART NO’SDSE8610 Installation Instructions 053-069DSE8610 Operator Manual 057-115DSE8600 PC Configuration Suite Manual 057-119DSE8660 Date Sheet 055-086
DSE8610AUTO START LOAD SHARE MODULE
®
DSEGenset
FEATURES
Registered in England & Wales No.01319649VAT No.316923457
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to changethe details shown on this data sheet without prior notice. The contents are intended for guidance only.
SPECIFICATION
DC SUPPLYCONTINUOUS VOLTAGE RATING8 V to 35 V continuous
CRANKING DROPOUTSAble to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries
MAXIMUM OPERATING CURRENT460 mA at 12 V, 245 mA at 24 V
MAXIMUM STANDBY CURRENT375 mA at 12 V, 200 mA at 24 V
CHARGE FAIL/EXCITATION RANGE0 V to 35 V
OUTPUTSOUTPUT A (FUEL)15 A DC at supply voltage
OUTPUT B (CRANK)15 A DC at supply voltage
OUTPUTS C & D8 A AC at 250 V AC (Volt free)
AUXILIARY OUTPUTS E,F,G2 A DC at supply voltage
GENERATOR & BUSVOLTAGE RANGE 15 V to 333 V AC (L-N)
FREQUENCY RANGE3.5 Hz to 75 Hz
MAGNETIC PICK-UPVOLTAGE RANGE+/- 0.5 V to 70 V
FREQUENCY RANGE10,000 Hz (max)
BUILT-IN GOVERNOR CONTROLMINIMUM LOAD IMPEDANCE 1000ΩFully isolated
GAIN VOLTAGE0 V to 10 V DCFully isolated
OFFSET VOLTAGE+/- 10 V DCFully isolated
BUILT-IN AVR CONTROLMINIMUM LOAD IMPEDANCE1000ΩFully isolated
GAIN VOLTAGE0 V to 10 V DCFully isolated
OFFSET VOLTAGE+/- 10 V DCFully isolated
DIMENSIONSOVERALL240 mm x 172 mm x 57 mm9.4” x 6.8” x 2.2”
PANEL CUTOUT220 mm x 160 mm8.7” x 6.3”
MAXIMUM PANEL THICKNESS8 mm0.3”
STORAGE TEMPERATURE RANGE-40 oC to +85 oC