Upload
others
View
10
Download
0
Embed Size (px)
Citation preview
PASO 1 Introducir las dos tarjetas micro-SIM en la ranura externa con el borde cortado hacia dentro (Fig. 1) IMPORTANTE:
Inserte la tarjeta SIM cuando el weBBoatÂŽ 4G Plus EVO estĂŠ apagado. Recomendamos eliminar el cĂłdigo PIN de la SIM antes de insertar la tarjeta SIM en la ranura de la SIM weBBoatÂŽ. AdemĂĄs, el cĂłdigo PIN de la SIM se puede insertar desde la aplicaciĂłn (PASO 7).
PASO 2 Conecte el weBBoatÂŽ 4G Plus EVO a una fuente Vcc 12 o 24. IMPORTANTE: no estĂĄ protegido contra la sobrecorriente ni el cortocircuito. Se recomienda usar un fusible de 1A durante la instalaciĂłn.
PASO 3 Descargue e instale la aplicaciĂłn weBBoatÂŽ en su dispositivo desde la App Store (para dispositivos iOS) y desde Google Play (para dispositivos Android). Vea el cĂłdigo QR a continuaciĂłn (Fig. 2). NOTA: Esta guĂa de referencia rĂĄpida se refiere a la versiĂłn de iOS. Las pantallas para la versiĂłn de Android pueden diferir ligeramente.
PASO 4 Conecte su dispositivo mĂłvil (por ejemplo, un telĂŠfono inteligente) a la red WiFi de weBBoatÂŽ 4G Plus EVO (Fig. 3). El nombre de la red Wi-Fi (SSID) predeterminado es weBBoat_XXXX (donde XXXX es una cadena Ăşnica para cada weBBoatÂŽ 4G Plus EVO) y no estĂĄ protegida por contraseĂąa. NOTA: Glomex le aconseja, despuĂŠs de la primera configuraciĂłn, que agregue una contraseĂąa (de al menos 8 caracteres) a la red WiFi de weBBoatÂŽ 4G Plus EVO (consulte el PASO 11).
PASO 5 Abra la aplicaciĂłn weBBoatÂŽ. Toque el botĂłn â+â en la esquina superior derecha (Fig. 4). Toque el botĂłn con el cĂłdigo QR. Escanee el cĂłdigo QR en el enrutador y presione âGuardarâ (Fig. 5). DespuĂŠs de escanear el cĂłdigo QR, puede cambiar el nombre del dispositivo. Alternativamente, puede conectar el weBBoatÂŽ 4G Plus EVO tocando el botĂłn â+â en la parte superior (Fig. 4) e inserte manualmente el nĂşmero de serie ubicado debajo de la etiqueta del CĂłdigo QR del enrutador (Fig. 5). NOTA: El cĂłdigo QR y el nĂşmero de serie se pueden encontrar en la parte inferior derecha de la pĂĄgina 2 de esta guĂa de referencia rĂĄpida.
PASO 6 Seleccione el weBBoatÂŽ 4G Plus EVO en la lista (Fig. 6). Inserte la contraseĂąa de administrador: admin (Fig. 7). Luego, toque el botĂłn Iniciar sesiĂłn. NOTA PARA USUARIO DE IOS: para un acceso rĂĄpido, toque el Ăcono de estrella para seleccionar los dispositivos weBBoat en la lista.
PASO 7 En el âAsistente de configuraciĂłnâ, seleccione el idioma (inglĂŠs, italiano, francĂŠs, espaĂąol y alemĂĄn). El inglĂŠs es el ajuste predeterminado (Fig. 8). Para desbloquear la tarjeta SIM, ingrese el cĂłdigo PIN (si es necesario). Por defecto, se selecciona la opciĂłn âAuto APNâ, que permite la conexiĂłn automĂĄtica (Fig. 8). Para ingresar un APN manualmente, anule la selecciĂłn de la opciĂłn âAuto APNâ y se mostrarĂĄ un menĂş desplegable con una lista de posibles APN. Al seleccionar el valor âningunoâ de esta lista, serĂĄ posible ingresar manualmente un APN personalizado. (Fig. 9) NOTA: Verifique el APN correcto con el Proveedor de servicios de Internet (ISP) de la tarjeta SIM. Si el APN que necesita no estĂĄ incluido en la lista predeterminada, contĂĄctenos en [email protected].
PASO 8 En el âAsistente de configuraciĂłnâ, la opciĂłn Autoswitch estĂĄ deshabilitada de manera predeterminada. Habilite la funciĂłn âAutoswitchâ para cambiar automĂĄticamente de WiFi a 4G/3G si se pierde la seĂąal de Hotspot WiFi externo (es decir, marina WiFi). Cuando se utiliza la conexiĂłn 4G/3G, si el mismo Hotspot WiFi externo (es decir marina WiFi) se detecta de nuevo, weBBoatÂŽ 4G Plus EVO cambiarĂĄ la conexiĂłn de vuelta de 4G/3G a WiFi automĂĄticamente. Para habilitar esta opciĂłn, toque el botĂłn âHabilitarâ (Fig. 8). Toque el botĂłn Escanear WiFi (Fig. 10), seleccione una de las redes WiFi externas disponibles. Toque el botĂłn Aceptar para unirse a la red y luego ingrese la contraseĂąa (si es necesario). Toque el botĂłn âGuardarâ para continuar (Fig.12). ATENCIĂN: Durante la configuraciĂłn del Autoswitch, la conexiĂłn entre el dispositivo mĂłvil y el weBBoatÂŽ 4G Plus EVO podrĂa perderse. Verifique la conexiĂłn entre los dispositivos y, si es necesario, reconĂŠctelos de forma inalĂĄmbrica entre sĂ antes de continuar. Para omitir el Asistente de configuraciĂłn, toque el botĂłn âOmitirâ (no recomendado). IMPORTANTE: Toque el botĂłn âGuardarâ en el âAsistente de configuraciĂłnâ para guardar todos los ajustes de configuraciĂłn 10). En la secciĂłn âConfiguraciĂłn avanzadaâ hay
STEP 1 Insert the two Micro SIM cards in the external slot with the cut edge facing inwards (Fig. 1) IMPORTANT:
Insert the SIM card when weBBoatÂŽ 4G Plus EVO is off. We recommend to remove the SIM PIN code before inserting the SIM card into the weBBoatÂŽ SIM slot. Also, the SIM PIN code can be inserted from the App (STEP 7). NOTE: Please note that US carriers do not use PIN codes.
STEP 2 Connect the weBBoatÂŽ 4G Plus EVO to a 12 or 24 Vdc source. IMPORTANT: This unit is not protected against excessive current or short circuit. It is recommended to use a 1 amp fuse for protection purposes during installation.
STEP 3 Download and install the weBBoat APP on your device from the APP store (for iOS devices) or from Goggle Play (for Android devices). Scan the QR code below (Fig. 2). NOTE: This Quick Reference Guide refers to the iOS version. The screens for the Android will differ slightly.
STEP 4 Connect your mobile device (e.g. smartphone) to the weBBoatÂŽ 4G Plus EVO WiFi network (Fig. 3). The default WiFi network name (SSID) is weBBoat_XXXX (where XXXX is a unique string for each weBBoatÂŽ 4G Plus EVO) and itâs not password protected. NOTE: It is advised after initial setup to create a password (minimum 8 characters) to secure the weBBoat 4G Plus EVO network. (see STEP 11).
STEP 5 Open the weBBoatÂŽ App. Tap the â+â button in the top right corner (Fig. 4). Tap the QR Code button. Scan the QR Code on the router and press âSaveâ (Fig. 5). After scanning the QR code, you can rename the device if desired. Alternatively, you can connect the weBBoatÂŽ 4G Plus EVO by tapping the â+â button on the top (Fig. 4) and insert manually the Serial Number located below the QR Code on the label (Fig. 5). NOTE: The QR code and the Serial Number can be found on the bottom-right of page 2 of this quick reference guide.
STEP 6 Select the weBBoatÂŽ 4G Plus EVO from the list (Fig. 6). Type the administrator password: admin (Fig. 7). Then, tap Login button. NOTE FOR IOS USERS: for quick access, tap the star icon to select weBBoat device in the list.
STEP 7 In the âSetup Wizardâ, select the language (English, Italian, French, Spanish and German). English is the default setting (Fig. 8). To unblock the SIM card, enter the PIN code (if necessary). By default, the âAuto APNâ option, which allows automatic connection, is selected (Fig. 8). To enter an APN manually, deselect the âAuto APNâ option and a drop-down menu will be shown with a list of possible APNs. By selecting the value ânoneâ from this list, it will be possible to manually enter a custom APN. (Fig 9) NOTE: Check the correct APN with the Internet Service Provider (ISP) of the SIM card. If the APN you need is not included in the default list, please contact us at [email protected].
STEP 8 In âSetup Wizardâ, the Autoswitch option is disabled by default. Enable âAutoswitchâ function to switch automatically from WiFi to 4G/3G if the external WiFi Hotspot signal (i.e. marina WiFi) is lost. While using the 4G/3G connection, if the same external WiFi Hotspot (i.e. marina WiFi) is detected again, weBBoatÂŽ 4G Plus EVO will switch the connection back from 4G/3G to WiFi automatically. To enable this option, tap âEnableâ button (Fig. 8). Tap WiFi Scan button (Fig. 10), select one of the available external WiFi networks. Tap OK button to join the network and then enter the password (if required). Tap âSaveâ button to proceed (Fig.12). WARNING: During the Autoswitch configuration, the connection between the mobile device and weBBoatÂŽ 4G Plus EVO will be lost. Please check the connection between the devices and if needed reconnect before proceeding. To skip the Setup Wizard, tap âSkipâ button (not recommended). IMPORTANT: Tap
Quick Reference Guide â Guida Rapida â Guide de RĂŠfĂŠrence Rapide Schnellstart-Anleitung â GuĂa de Referencia RĂĄpida
PASSAGGIO 1 Inserire le due SIM Micro nelle apposite slot esterne con il bordo tagliato rivolto verso lâinterno (Fig. 1) IMPORTANTE:
Inserire la scheda SIM quando il weBBoatŽ 4G Plus EVO è spento. Si consiglia di rimuovere il codice PIN della SIM prima di inserire la scheda SIM nello slot SIM del weBBoatŽ. Il codice PIN della SIM può anche essere inserito tramite App (PASSAGGIO 7).
PASSAGGIO 2 Collegare il weBBoatÂŽ 4G Plus EVO ad una fonte di alimentazione 12 o 24 Vdc. IMPORTANTE: il weBBoatÂŽ 4G Plus EVO non è protetto da sovracorrente e cortocircuito. Si consiglia di utilizzare un fusibile da 1A durante lâinstallazione.
PASSAGGIO 3 Scaricare ed installare lâApp weBBoatÂŽ sul proprio dispositivo dallâApp Store (per dispositivi iOS) e da Google Play (per dispositivi Android). Scansionare il codice QR qui sotto (Fig. 2). NOTA: Questa guida rapida fa riferimento alla versione iOS. Le schermate per la versione Android potrebbero differire leggermente.
PASSAGGIO 4 Connettere il proprio dispositivo mobile (per esempio smartphone) alla rete Wi-Fi del weBBoatŽ 4G Plus EVO (Fig. 3). Il nome predefinito della rete WiFi (SSID) è weBBoat_XXXX (dove XXXX è una stringa univoca per ogni weBBoatŽ 4G Plus EVO) e non è protetto da password. NOTA: Glomex consiglia di aggiungere, dopo la prima installazione, una password (almeno 8 caratteri) alla rete WiFi weBBoatŽ 4G Plus EVO (si veda PASSAGGIO 11).
PASSAGGIO 5 Aprire lâApp weBBoatÂŽ. Premere il pulsante â+â in alto a destra (Fig. 4). Premere il pulsante Codice QR. Scansionare il codice QR sul router e premere âSalvaâ (Fig. 5). Dopo aver scansionato il codice QR, è possibile rinominare il dispositivo. In alternativa, è possibile collegare manualmente il weBBoatÂŽ 4G Plus EVO facendo clic sul pulsante â+â in alto (Fig. 4) e inserire manualmente il numero di serie situato nellâetichetta del codice QR del router (Fig. 5). NOTA: Il codice QR e il numero di serie si possono trovare a pagina 2 in basso a destra di questa guida rapida.
PASSAGGIO 6 Selezionare il weBBoatÂŽ 4G Plus EVO nellâelenco (fig. 6). Inserire la password amministratore: admin (Fig. 7). Quindi, premere il pulsante Login. NOTA PER LâUTENTE IOS: per lâaccesso rapido, toccare lâicona a stella per selezionare i dispositivi weBBoat nellâelenco.
PASSAGGIO 7 In âConfigurazione guidataâ, selezionare la lingua (inglese, italiano, francese, spagnolo e tedesco). La lingua inglese è lâimpostazione predefinita (Fig. 8). Per sbloccare la scheda SIM, inserire il codice PIN (se necessario). Di default lâopzione âAuto APNâ, che permette una connessione automatica, è selezionata (Fig. 8). Per inserire un APN manualmente, deselezionare lâopzione âAuto APNâ e verrĂ mostrato un menĂš a tendina con un elenco di possibili APN. Selezionando da questo elenco il valore ânessunoâ sarĂ possibile inserire manualmente un APN custom. (Fig 9) NOTA: Verificare lâAPN corretto con il Provider di servizi Internet (ISP) della scheda SIM. Se lâAPN di cui si ha bisogno non fosse incluso nellâelenco di default, siete pregati di contattarci a [email protected].
PASSAGGIO 8 In âConfigurazione guidataâ, lâopzione di Autoswitch è disattivata come impostazione predefinita. Abilitare la funzione âAutoswitchâ per passare automaticamente da WiFi a 4G / 3G se si perde il segnale dellâhotspot WiFi esterno (es. WiFi della marina). Quando si utilizza la connessione 4G/3G, se viene rilevato nuovamente lo stesso hotspot WiFi esterno (ad es. WiFi della marina), weBBoatÂŽ 4G Plus EVO passerĂ automaticamente da 4G/3G a WiFi. Per abilitare questa opzione, premere il pulsante âAbilitaâ (Fig. 8). Premere il pulsante WiFi Scan (Fig. 10), selezionare una delle reti WiFi esterne disponibili. Premere il pulsante OK per connettersi alla rete, quindi inserire la password (se necessario). Premere il tasto âSalvaâ per continuare (Fig. 12). AVVERTENZA: Durante la configurazione Autoswitch, la connessione tra il dispositivo mobile e weBBoatÂŽ 4G Plus EVO potrebbe andare persa. Si prega di verificare la connessione tra i dispositivi e, se necessario, riconnetterli in modalitĂ wireless prima di procedere. Per ignorare la Configurazione guidata, premere il pulsante âIgnoraâ (non consigliato). IMPORTANTE: Premere il tasto âSalvaâ nella âConfigurazione
ĂTAPE 1 InsĂŠrez les deux cartes SIM Micro dans la prise externe avec le bord coupĂŠ vers lâintĂŠrieur (Fig. 1). IMPORTANT : insĂŠrez la carte SIM
lorsque le weBBoatÂŽ 4G Plus EVO est ĂŠteint. Nous recommandons dâenlever le code PIN de la SIM avant de lâinserer dans le lecteur. NĂŠanmoins, le code PIN peut etre insĂŠrĂŠ depuis lâappli (ĂTAPE 7).
ĂTAPE 2 Connectez le weBBoatÂŽ 4G Plus EVO Ă une source de 12 ou de 24 Vcc. IMPORTANT : il nâest pas protĂŠgĂŠ contre les surintensitĂŠs et les courts-circuits. Il est recommandĂŠ dâutiliser un fusible de 1A lors de lâinstallation.
ĂTAPE 3 TĂŠlĂŠchargez et installez lâapplication weBBoatÂŽ dans votre appareil depuis lâApp Store (pour les appareils iOS) et depuis Google Play (pour les appareils Android) (voir Fig.2). REMARQUE: Ce guide de rĂŠfĂŠrence rapide fait rĂŠfĂŠrence Ă la version iOS. Les ĂŠcrans pour la version Android peuvent diffĂŠrer lĂŠgèrement.
ĂTAPE 4 Connectez votre appareil mobile (par exemple, un smartphone) au rĂŠseau Wi-Fi weBBoatÂŽ 4G Plus EVO. Le nom du rĂŠseau Wi-Fi par dĂŠfaut (SSID) est weBBoat_XXXX (oĂš XXXX est une chaĂŽne unique pour chaque weBBoatÂŽ 4G Plus EVO) et il nâest pas protĂŠgĂŠ par un mot de passe. REMARQUE : Glomex vous conseille, après la première installation, dâajouter un mot de passe (au moins 8 caractères) au rĂŠseau Wi-Fi weBBoatÂŽ 4G Plus EVO (voir lâĂTAPE 11).
ĂTAPE 5 Ouvrez lâapplication weBBoatÂŽ. Appuyez sur le bouton ÂŤ + Âť dans le coin droit supĂŠrieur (Fig. 4). Appuyez sur le bouton Code QR. Scannez le Code QR sur le routeur et appuyez sur ÂŤ Save Âť (Enregistrer) (Fig. 5). Après avoir scannĂŠ le code QR, vous pouvez renommer lâappareil. Autrement, vous pouvez connecter le weBBoatÂŽ 4G Plus EVO en appuyant sur le bouton ÂŤ + Âť en haut (Fig. 4) et insĂŠrer manuellement le NumĂŠro de sĂŠrie situĂŠ en-dessous de lâĂŠtiquette Code QR du routeur (Fig. 5). REMARQUE : le code QR et le NumĂŠro de sĂŠrie se trouvent en bas Ă droite de la page 2 de ce guide de rĂŠfĂŠrence rapide.
ĂTAPE 6 SĂŠlectionnez le weBBoatÂŽ 4G Plus EVO sur la liste (Fig. 6). InsĂŠrez le mot de passe administrateur : admin (Fig. 7). Puis enfoncez le bouton ÂŤ Login Âť (Connexion). REMARQUE POUR LES DISPOSITIFS IOS: pour un accès rapide, appuyez sur lâicĂ´ne ĂŠtoile pour sĂŠlectionner les pĂŠriphĂŠriques weBBoat dans la liste.
ĂTAPE 7 Sur l âÂŤAssistant de configurationÂť, sĂŠlectionnez la langue (anglais, italien, français, espagnol et allemand). Lâanglais est le paramètre par dĂŠfaut (Fig. 8). Pour dĂŠbloquer la carte SIM, saisissez le code PIN (si nĂŠcessaire). Par dĂŠfaut, lâoption âAPN automatiqueâ, qui permet la connexion automatique, est sĂŠlectionnĂŠe (Fig. 8). Pour entrer un APN manuellement, dĂŠsĂŠlectionnez lâoption âAPN automatiqueâ et un menu dĂŠroulant sâaffichera avec une liste des APN possibles. En sĂŠlectionnant la valeur âaucunâ dans cette liste, il sera possible de saisir manuellement un APN personnalisĂŠ. (Fig 9) REMARQUE: VĂŠrifiez le bon APN auprès du fournisseur dâaccès Internet (FAI) de la carte SIM. Si lâAPN dont vous avez besoin nâest pas inclus dans la liste par dĂŠfaut, veuillez nous contacter Ă [email protected].
ĂTAPE 8 Sur ÂŤ Setup Wizard Âť (configuration) lâoption Autoswitch est dĂŠsactivĂŠe par dĂŠfaut. Activez la fonction ÂŤ Autoswitch Âť pour passer automatiquement du Wi-Fi au 4G/3G si le signal de la borne Wi-Fi externe (câest-Ă -dire marina Wi-Fi) est perdu. Lorsque vous utilisez la connexion 4G/3G, si la mĂŞme borne Wi-Fi externe (câest-Ă -dire marina Wi-Fi) est dĂŠtectĂŠe Ă nouveau, le weBBoatÂŽ 4G Plus EVO rĂŠtablira la connexion du 4G/3G au Wi-Fi automatiquement. Pour activer cette option, appuyez sur le bouton ÂŤ Activer Âť (Fig. 8). Appuyez sur le bouton Wi-Fi Scan (Fig. 10), sĂŠlectionnez lâun des rĂŠseaux Wi-Fi externes disponibles. Appuyez sur le bouton OK pour rejoindre le rĂŠseau puis saisissez le mot de passe (si cela est requis). Appuyez sur le bouton ÂŤ Save Âť (Enregistrer) pour continuer (Fig.12). AVERTISSEMENT : lors de la configuration Autoswitch, la connection wi-fi entre lâappareil mobile et le weBBoatÂŽ 4G Plus EVO pourrait ĂŞtre perdue. Veuillez vĂŠrifier la connexion entre les appareils et, au besoin, les reconnecter avant de continuer. Pour ignorer lâAssistant de configuration, appuyez sur le bouton ÂŤ Skip Âť (Ignorer) (non recommandĂŠ). IMPORTANT : appuyez sur le bouton ÂŤ Save Âť (Enregistrer) dans ÂŤ Setup Wizard Âť (configuration) pour enregistrer tous les paramètres de configuration (Fig.10). Dans la section ÂŤParamètres avancĂŠsÂť, il y a une section ÂŤConfiguration de lâinterrupteur automatiqueÂť (Fig.11) dans laquelle il est
SCHRITT 1 Stecken Sie die beiden Micro-SIM-Karten so in die Kartenslots, dass die abgeschrägte Seite zur Antennenmitte
weist (Abb. 1) WICHTIG: SIM-Karte einlegen, wenn weBBoat 4G Plus EVO ausgeschaltet ist. Wir empfehlen, den SIM-PIN-Code vor dem Einsetzen der SIM-Karte in den WeBBoatÂŽ SIM-Slot zu entfernen. Der SIM-Pincode kann auch Ăźber die App (SCHRITT 7) eingesetzt werden.
SCHRITT 2 WeBBoatÂŽ 4G Plus EVO an eine 12 oder 24 Vdc-Stromquelle anschlieĂen. WICHTIG: Ist nicht gegen Ăberstrom und Kurzschluss gesichert. Wir empfehlen, während der Installation eine 1A-Sicherung zu verwenden.
SCHRITT 3 Laden Sie vom App-Store (fßr IOS-Geräte) und von Google Play (Android Geräte) die weBBoatŽ App auf Ihr Gerät. Sie nachstehenden QR-Code (Abb. 2) HINWEIS: Diese Kurzanleitung bezieht sich auf die iOS-Version. Die Bildschirme fßr die Android-Version kÜnnen geringfßgig abweichen.
SCHRITT 4 Verbinden Sie Ihr Mobilgerät (z.B. Smartphone) mit dem weBBoatŽ 4G Plus EVO WiFi-Netzwerk (Abb. 3) Der Standard WiFi-Netzwerkname (SSID) ist WeBBoat_XXXX (XXXX bezeichnet eine eindeutige Zeichenfolge fßr jedes WeBBoatŽ 4G Plus EVO) und es ist nicht kennwortgeschßtzt. HINWEIS: Glomex empfiehlt Ihnen nach der Ersteinrichtung das weBBoatŽ 4G Plus EVO WiFi -Netzwerk (siehe SCHRITT 11) mit einem Passwort (mindestens 8 Zeichen) zu ergänzen.
SCHRITT 5 Ăffnen Sie die weBBoatÂŽ 4G. Tippen Sie auf die Taste â+â in der rechten oberen Ecke (Abb. 4). Tippen Sie auf die Schaltfläche âQR Codeâ. Scannen Sie am Router den QR Code und bestätigen mit âSpeichernâ(Abb. 5). Nach dem Scannen des QR-Codes kĂśnnen Sie das Gerät umbenennen. Alternativ kĂśnnen Sie weBBoatÂŽ 4G Plus EVO durch einen Klick auf die Taste â+â ganz oben (Abb.4) und geben manuell die unter der QR Codeetikettierung des Routers befindliche Seriennummer ein. HINWEIS: Den QR-Code und die Seriennummer finden Sie unten rechts auf der Seite 2 dieser Kurzanleitung.
SCHRITT 6 Wählen Sie in der Liste weBBoatÂŽ 4G Plus EVO (Abb. 6) aus. Administrator-Passwort eingeben: admin (Abb. 7). Danach die Anmeldeschaltflächen anklicken. HINWEIS FĂR IOS-BENUTZER: Tippen Sie fĂźr den Schnellzugriff auf das Sternsymbol, um weBBoat-Geräte in der Liste auszuwählen.
SCHRITT 7 Wählen Sie im âSetup-Assistentenâ die Sprache (Englisch, Italienisch, FranzĂśsisch, Spanisch und Deutsch). Englisch ist die Standardeinstellung (Abb. 8). Geben Sie den PIN-Code ein (falls erforderlich), um die SIM-Karte zu entsperren. StandardmäĂig ist die Option âAuto APNâ ausgewählt, die eine automatische Verbindung ermĂśglicht (Abb. 8). Um einen APN manuell einzugeben, deaktivieren Sie die Option âAuto APNâ. Ein Dropdown-MenĂź mit einer Liste mĂśglicher APNs wird angezeigt. Durch Auswahl des Werts ânoneâ aus dieser Liste kann ein benutzerdefinierter APN manuell eingegeben werden. (Abb. 9) HINWEIS: ĂberprĂźfen Sie den korrekten APN beim Internetdienstanbieter (ISP) der SIM-Karte. Wenn der von Ihnen benĂśtigte APN nicht in der Standardliste enthalten ist, kontaktieren Sie uns bitte unter [email protected].
SCHRITT 8 StandardmäĂig ist im âEinrichtungsassistentenâ, die automatische Umschaltfunktion deaktiviert. Aktivieren Sie die âAutomatische Umschaltfunktionâ, um automatisch von WiFi zu 4G/3G umzuschalten, wenn das externe WiFi Hotspot-Signal (d.h. Marina WiFi) verloren geht. Wenn Sie 4G/3G verwenden und wieder derselbe externe WiFi Hotspot (d.h. Marina WiFi) erkannt wird, schaltet weBBoatÂŽ 4G Plus EVO automatisch von 4G/3G zu WiFi. Um diese Option zu aktivieren, tippen Sie auf âAktivierenâ (Abb. 8). Tippen Sie auf die WiFi Scan-Taste (Abb. 10) und wählen eines der verfĂźgbaren externen WiFi-Netzwerke aus. Tippen Sie auf OK, um das Netzwerk zu nutzen, und geben dann das Kennwort ein (falls erforderlich). Tippen Sie auf âSpeichernâ, um fortzufahren (Abb. 12). WARNUNG: Während der Auto-Switch-Konfiguration, kĂśnnte die Verbindung zwischen dem Mobilgerät und weBBoatÂŽ 4G Plus EVO verloren gehen. PrĂźfen Sie bitte die Verbindung zwischen den Geräten und verbinden sich bei Bedarf Ăźber Funk, ehe Sie fortsetzen. Um den Einrichtungsassistenten zu Ăźberspringen, tippen Sie auf âĂberspringenâ (nicht empfohlen). WICHTIG: Um alle Konfigurationseinstellungen (Abb.
(Fig. 9)(Fig. 8)(Fig. 7)(Fig. 6)(Fig. 5)(Fig. 4)(Fig. 3)
(Fig
. 2)
(Fig. 10)
DOWNLOAD THE APP
1
www.glomex.it [email protected] www.glomex.us - [email protected]
Codes: IT1004PLUSEVO - IT1004PLUSEVO/US - IT1004PLUSEVO/SA
Rel. 1.0 issued January 2021 - Specifications may change without notice
(Fig
. 1)
âSaveâ button in âSetup Wizardâ to save all configuration settings (Fig. 10). In the âAdvanced Settingsâ section there
is a âAutoswitch Configurationâ section (Fig. 11) in which it is possible to customize the operation of the âAutoswitchâ mode by redefining the priority of the various internet sources: WiFi (Default Priority 1), Mobile ( Default Priority 2) and SAT (Default Priority 3).
STEP 9 After tapping âSaveâ button, the Control Panel will be shown automatically. This section includes all information related to the signal, the active SIM card and the APN in use (Fig. 13). If the Autoswitch function is not enabled, enable it by tapping âAutoswitchâ button (Fig. 13).
STEP 10 In the âControl Panelâ, choose one of the following Mobile modes (Fig. 13) Auto: weBBoatÂŽ 4G Plus EVO is connected to the network that provides the best Internet connection 4G only: weBBoatÂŽ 4G Plus EVO is connected to the 4G network only. 3G only: weBBoatÂŽ 4G Plus EVO is connected to the 3G network only. You can select the active SIM by clicking on the SIM selector (Fig. 13). The SIM change operation take about 15 seconds to be completed. Other ways of managing Mobile / WiFi operations from the Control Panel are: Autoswitch: as described on step 9. Mobile Only: the weBBoat is forced to work in Mobile regardless of other available Internet sources. WiFi Only: the weBBoat is forced to work in WiFi regardless of other available Internet sources. SAT Only: the weBBoat is forced to work using the SAT input regardless of other available Internet sources. NOTE: Please note that other WiFi networks nearby could affect the speed performance of the weBBoatÂŽ 4G Plus EVO.
STEP 11 To customize the name of the Wi-Fi network generated by weBBoatÂŽ 4G Plus EVO (SSID) and its password, tap the Menu button (Fig. 14) and select âAdvanced settingsâ. Go to âWiFi Configurationâ section. Change the SSID in the related field and select the encryption type. Type the password and tap Save button (Fig. 15). SUGGESTION: Choose WPA2- PSK encryption for better security. NOTE: Do not use spaces or special characters in the name of the Wi-Fi network (SSID) and password. After changing the name of the Wi-Fi network (SSID) and the password, the weBBoatÂŽ 4G Plus EVO will be rebooted automatically. Close the weBBoatÂŽ App, reconnect your mobile device (e.g. smartphone) to the new Wi-Fi network of the weBBoatÂŽ 4G Plus EVO and then reopen the App.
STEP 12 To change the Administrator password, tap the Menu button (Fig. 14) and tap âAdvanced settingsâ. In the âAdministrator Passwordâ section enter the new administrator password in both fields and tap Save button. IMPORTANT: Keep the new password in a safe place and do not forget it. If the administrator password is lost, you must restore the device to the default factory settings using the Reset button placed in the back of the router (Fig 16). To restore the device, push and hold the Reset button for at least 5 seconds. The Reset button can be released when all 5 signal strength LEDs (Fig. 17) are ON. When the weBBoatÂŽ 4G Plus EVO reboots, it will reset all custom changes to factory defaults. Close the weBBoatÂŽ App, reconnect your mobile device (e.g. smartphone) to the Wi-Fi network of the weBBoatÂŽ 4G Plus EVO and then reopen the App.
STEP 13 When firmware and Auto APN database updates are available, they will appear as an Upgrade Button in the âSystem Updatesâ menu (Fig. 18). Tap âUpgradeâ button to perform the upgrade and wait for a few minutes. IMPORTANT: When the Firmware upgrade is completed, weBBoatÂŽ 4G Plus EVO will reboot automatically. Close the weBBoatÂŽ App, reconnect your mobile device (e.g. smartphone) to the Wi-Fi network of the weBBoatÂŽ 4G Plus EVO and then reopen the App. PLEASE DO NOT POWER OFF THE WEBBOAT 4G PLUS EVO DURING THE INSTALLATION.
STEP 14 SMS MANAGEMENT The SMS section on the menu (Fig. 14) shows a number that indicates the number of received and unread SMS on the active SIM in the weBBoatÂŽ. By clicking on SMS you access the SMS section where you can read the SMS, monitor your credit and, if the SIM is enabled, send messages (Fig. 19).
una secciĂłn âConfiguraciĂłn de cambio automĂĄticoâ (Fig. 11) en la que puede personalizar el funcionamiento del modo âCambio
automĂĄticoâ redefiniendo la prioridad de las distintas fuentes de Internet: WiFi (Prioridad predeterminada 1), MĂłvil ( Prioridad predeterminada 2) y SAT (Prioridad predeterminada 3).
PASO 9 DespuĂŠs de tocar el botĂłn âGuardarâ, el Panel de control se mostrarĂĄ automĂĄticamente. Esta secciĂłn incluye toda la informaciĂłn relacionada con la seĂąal, la tarjeta SIM activa y el APN en uso (Fig. 13). Si la funciĂłn de Autoswitch no estĂĄ habilitada, actĂvela tocando el botĂłn âAutoswitchâ (Fig. 13).
PASO 10 En el âPanel de controlâ, elija uno de los siguientes modos mĂłviles (Fig. 13) AutomĂĄtico: weBBoatÂŽ 4G Plus EVO estĂĄ conectado a la red que proporciona la mejor conexiĂłn a Internet. Solo 4G: weBBoatÂŽ 4G Plus EVO estĂĄ conectado solo a la red 4G. Solo 3G: weBBoatÂŽ 4G Plus EVO estĂĄ conectado solo a la red 3G. Puede seleccionar su SIM activa preferida haciendo clic en el selector de SIM (Fig. 13). La finalizaciĂłn de la operaciĂłn de cambio de SIM tarda unos 15 segundos. Otras formas de administrar operaciones celulares / WiFi a las que se puede acceder a travĂŠs del Panel de control son: AutomĂĄtico: como se describe en el paso 9. Solo para mĂłvil: el weBBoat debe funcionar independientemente de otras fuentes de Internet disponibles en dispositivos mĂłviles. Solo WiFi: el weBBoat debe funcionar con la fuente WiFi seleccionada independientemente de otras fuentes de Internet disponibles. Solo SAT: el weBBoat debe funcionar con la entrada SAT independientemente de otras fuentes de Internet disponibles NOTA: Tenga en cuenta que otras redes WiFi cercanas podrĂan afectar el rendimiento de velocidad del weBBoatÂŽ 4G Plus EVO.
PASO 11 Para personalizar el nombre de la red Wi-Fi generada por weBBoatÂŽ 4G Plus EVO (SSID) y su contraseĂąa, pulse el botĂłn de menĂş (Fig. 14) y seleccione âConfiguraciĂłn avanzadaâ. Vaya a la secciĂłn âConfiguraciĂłn de WiFiâ. Cambie el SSID en el campo relacionado y seleccione el tipo de cifrado. Escriba la contraseĂąa y toque el botĂłn Guardar (Fig. 15). SUGERENCIA: Elija el cifrado WPA2-PSK para una mayor seguridad. NOTA: No use espacios o caracteres especiales en el nombre de la red Wi-Fi (SSID) ni la contraseĂąa. DespuĂŠs de cambiar el nombre de la red Wi-Fi (SSID) y la contraseĂąa, el weBBoatÂŽ 4G Plus EVO se reiniciarĂĄ automĂĄticamente. Cierre la aplicaciĂłn weBBoatÂŽ, vuelva a conectar el dispositivo mĂłvil (por ejemplo, telĂŠfonos inteligentes) a la nueva red Wi-Fi del weBBoatÂŽ 4G Plus EVO y vuelva a abrir la aplicaciĂłn.
PASO 12 Para cambiar la contraseĂąa de administrador, toque el botĂłn de menĂş (Fig. 14) y toque âConfiguraciĂłn avanzadaâ. En la secciĂłn âContraseĂąa de administradorâ, inserte la nueva contraseĂąa de administrador en ambos campos y toque el botĂłn Guardar. IMPORTANTE: Guarde la nueva contraseĂąa en un lugar seguro y no la olvide. Si se pierde la contraseĂąa de administrador, Glomex le sugiere restaurar el dispositivo a la configuraciĂłn predeterminada de fĂĄbrica utilizando el botĂłn Restablecer ubicado en la parte posterior del enrutador (Fig. 16). Para restaurar el dispositivo, mantenga presionado el botĂłn Restablecer durante al menos 5 segundos. El botĂłn de reinicio se puede liberar cuando los 5 LED de intensidad de seĂąal (Fig. 17) estĂĄn encendidos. Cuando el weBBoatÂŽ 4G Plus EVO se reinicie, restablecerĂĄ todos los cambios del cliente a los valores predeterminados de fĂĄbrica. Cierre la aplicaciĂłn weBBoatÂŽ, vuelva a conectar su dispositivo mĂłvil (por ejemplo, un telĂŠfono inteligente) a la red Wi-Fi del weBBoatÂŽ 4G Plus EVO y luego vuelva a abrir la aplicaciĂłn.
PASO 13 Cuando el firmware y las actualizaciones de la base de datos de APN automĂĄtica estĂŠn disponibles, aparecerĂĄ un botĂłn Actualizar en el menĂş âActualizaciones del sistemaâ (Fig. 18). Toque el botĂłn âActualizarâ para realizar la actualizaciĂłn y espere unos minutos. IMPORTANTE: Cuando se haya completado la actualizaciĂłn del firmware, weBBoatÂŽ 4G Plus EVO se reiniciarĂĄ automĂĄticamente. Cierre la aplicaciĂłn weBBoatÂŽ, vuelva a conectar su dispositivo mĂłvil (por ejemplo, un telĂŠfono inteligente) a la red Wi-Fi del weBBoatÂŽ 4G Plus EVO y luego vuelva a abrir la aplicaciĂłn.POR FAVOR NO APAGUE EL WEBBOAT 4G PLUS EVO DURANTE LA INSTALACIĂN
PASO 14 GESTIĂN DE SMS El elemento del menĂş SMS (Fig. 14) muestra un nĂşmero que indica el nĂşmero de SMS recibidos y no leĂdos en la SIM activa en weBBoatÂŽ. Pulsando sobre SMS accedes al apartado de SMS donde puedes leer los SMS recibidos, controlar tu crĂŠdito y, si la SIM estĂĄ habilitada, enviar mensajes (Fig. 19).
guidataâ per salvare tutte le impostazioni di configurazione (Fig. 10). Nella sezione âImpostazioni avanzateâ è presente una sezione
âConfigurazione Autoswitchâ (Fig. 11) nella quale è possibile personalizzare il funzionamento della modalitĂ âAutoswitchâ andando a ridefinire la prioritĂ delle varie sorgenti internet: WiFi (Default PrioritĂ 1), Mobile (Default PrioritĂ 2) e SAT (Default PrioritĂ 3).
PASSAGGIO 9 Dopo aver premuto il tasto âSalvaâ, il Pannello di Controllo verrĂ mostrato automaticamente. Questa sezione include tutte le informazioni relative al segnale, la scheda SIM attiva e lâAPN in uso (Fig. 13). Se la funzione Autoswitch non è stata abilitata, abilitarla premendo il tasto âAutoswitchâ (Fig. 13).
PASSAGGIO 10 Nel âPannello di controlloâ, scegliere una delle seguenti modalitĂ Mobile (Fig. 13): Auto: weBBoatÂŽ 4G Plus EVO è collegato alla rete che fornisce la migliore connessione Internet. Solo 4G: weBBoatÂŽ 4G Plus EVO è collegato solo alla rete 4G. Solo 3G: weBBoatÂŽ 4G Plus EVO è collegato solo alla rete 3G. Ă possibile selezionare la SIM attiva preferita cliccando nel selettore relativo alle SIM (Fig. 13). Lâoperazione di cambio SIM richiede unâattesa di circa 15 sec. per il suo completamento. Altre modalitĂ di gestione del funzionamento Mobile/WiFi accessibile dal pannello di Controllo sono: Switch Automatico: come descritto al punto 9. Solo Mobile: il weBBoat è forzato a funzionare in Mobile indipendentemente da altre sorgenti Internet disponibili Solo WiFi: il weBBoat è forzato a funzionare utilizzando la sorgente WiFi selezionata indipendentemente da altre sorgenti Internet disponibili ¡ Solo SAT: il weBBoat è forzato a funzionare utilizzando lâingresso SAT indipendentemente da altre sorgenti Internet disponibili NOTA: Si prega di tenere presente che altre reti WiFi nelle vicinanze potrebbero influire sulle prestazioni di velocitĂ del weBBoatÂŽ 4G Plus EVO.
PASSAGGIO 11 Per personalizzare il nome della rete Wi-Fi generata da weBBoatÂŽ 4G Plus EVO (SSID) e la relativa password, premere il pulsante Menu (Fig. 14) e selezionare âImpostazioni avanzateâ. Entrare nella sezione âConfigurazione WiFiâ. Cambiare il SSID nel campo correlato e selezionare il tipo di crittografia. Digitare la password e premere il pulsante Salva (Fig. 15). SUGGERIMENTO: Scegliere la crittografia WPA2 - PSK per una maggiore sicurezza. NOTA: Non utilizzare spazi o caratteri speciali nel nome della rete Wi-Fi (SSID) e nella password. Dopo avere cambiato il nome della rete Wi-Fi (SSID) e la password, il weBBoatÂŽ 4G Plus EVO si riavvierĂ automaticamente. Chiudere lâapp weBBoatÂŽ, ricollegare il dispositivo mobile (ad es. Smartphone) alla nuova rete Wi-Fi del weBBoatÂŽ 4G Plus EVO e poi riaprire lâapp.
PASSAGGIO 12 Per modificare la password amministratore, premere il tasto Menu (Fig. 14) e âImpostazioni avanzateâ. Nella sezione âPassword amministratoreâ inserire la nuova password amministratore in entrambi i campi e premere il tasto âSalvaâ. IMPORTANTE: Conservare la nuova password in un posto sicuro e non dimenticarla. Se si dimentica la password amministratore, Glomex consiglia di ripristinare il dispositivo alle impostazioni predefinite di fabbrica utilizzando il pulsante Reset posto sul retro del router (Fig. 16). Per ripristinare il dispositivo, tenere premuto il pulsante Reset per almeno 5 secondi. Il pulsante Reset può essere rilasciato quando tutti e 5 i LED di potenza del segnale (Fig. 17) sono accesi. Quando weBBoatÂŽ 4G Plus EVO si riavvia, ripristinerĂ tutte le modifiche del cliente alle impostazioni di fabbrica. Chiudere lâapp weBBoatÂŽ, ricollegare il dispositivo mobile (ad es. Smartphone) alla nuova rete Wi-Fi del weBBoatÂŽ 4G Plus EVO e poi riaprire lâapp.
PASSAGGIO 13 Quando sono disponibili aggiornamenti per il Firmware e il database Auto APN, apparirĂ un pulsante âAggiornamentoâ nel menu âAggiornamenti di sistemaâ (Fig. 18). Premere il tasto âAggiornamentoâ per eseguire lâaggiornamento e attendere pochi minuti. IMPORTANTE: Al termine dellâaggiornamento firmware, weBBoatÂŽ 4G Plus EVO si riavvia in automatico. Chiudere lâapp weBBoatÂŽ, ricollegare il dispositivo mobile (ad es. Smartphone) alla rete Wi-Fi del weBBoatÂŽ 4G Plus EVO e poi riaprire lâapp. NON SPEGNERE IL WEBBOAT 4G PLUS EVO DURANTE LâINSTALLAZIONE.
PASSAGGIO 14 GESTIONE SMS Nella voce di menÚ SMS (Fig. 14) viene mostrato un numero che indica il numero di SMS ricevuti e non letti sulla SIM attiva nel weBBoatŽ. Cliccando in SMS si accede alla sezione SMS dove è possibile leggere gli SMS ricevuti, monitorare il proprio credito e, se la SIM è abilitata, inviare messaggi (Fig. 19).
possible de personnaliser le fonctionnement du mode ÂŤInterrupteur automatiqueÂť en redĂŠfinissant la prioritĂŠ des diffĂŠrentes sources
Internet: WiFi (PrioritĂŠ par dĂŠfaut 1), Mobile ( PrioritĂŠ par dĂŠfaut 2) et SAT (prioritĂŠ par dĂŠfaut 3).
ĂTAPE 9 Après avoir appuyĂŠ sur le bouton ÂŤ Save Âť (Enregistrer), le Panneau de commande sâaffichera automatiquement. Cette section comprend toutes les informations relatives au signal, Ă la carte SIM active et Ă lâAPN utilisĂŠs (Fig. 13). Si la fonction Autoswitch nâest pas activĂŠe, activez-la en appuyant sur le bouton ÂŤ Autoswitch Âť (Fig. 13).
ĂTAPE 10 Dans le ÂŤ Control Panel Âť (Panneau de commande), choisissez lâun des modes Mobile suivants (Fig. 13) Auto : weBBoatÂŽ 4G Plus EVO est connectĂŠ au rĂŠseau qui fournit la meilleure connexion Internet 4G seulement: weBBoatÂŽ 4G Plus EVO est connectĂŠ au rĂŠseau 4G seulement 3G seulement: weBBoatÂŽ 4G Plus EVO est connectĂŠ au rĂŠseau 3G seulement. Vous pouvez sĂŠlectionner votre carte SIM active prĂŠfĂŠrĂŠe en cliquant sur le sĂŠlecteur SIM (Fig. 13). LâopĂŠration de changement de carte SIM nĂŠcessite une attente dâenviron 15 secondes. Les autres moyens de gĂŠrer le fonctionnement Mobile / WiFi accessibles depuis le panneau de contrĂ´le sont: Autoswitch: comme dĂŠcrit au ĂŠtape 9 Mobile seulement: le weBBoat est obligĂŠ de fonctionner dans Mobile indĂŠpendamment des autres sources Internet disponibles WiFi seulement: le weBBoat est obligĂŠ de fonctionner en WiFi indĂŠpendamment des autres sources Internet disponibles SAT seulement: le weBBoat est obligĂŠ de fonctionner en utilisant lâentrĂŠe SAT indĂŠpendamment des autres sources Internet disponibles. REMARQUE : Sachez que dâautres rĂŠseaux Wi-Fi Ă proximitĂŠ pourraient affecter la performance de la vitesse du weBBoatÂŽ 4G Plus EVO.
ĂTAPE 11 Pour personnaliser le nom du rĂŠseau Wi-Fi gĂŠnĂŠrĂŠ par weBBoatÂŽ 4G Plus EVO (SSID) et son mot de passe, appuyez sur le bouton Menu (Fig. 14) et sĂŠlectionnez ÂŤ Advanced settings Âť (Paramètres avancĂŠs). Dirigez-vous vers la section ÂŤ WiFi Configuration Âť (Configuration Wi-Fi). Changez le SSID dans le champ correspondant et sĂŠlectionnez le type de chiffrement. Tapez le mot de passe et appuyez sur le bouton ÂŤ Save Âť (Enregistrer) (Fig. 15). SUGGESTION : choisissez le chiffrement WPA2- PSK pour une meilleure sĂŠcuritĂŠ. REMARQUE : Nâutilisez pas dâespaces ou de caractères spĂŠciaux dans le nom du rĂŠseau Wi-Fi (SSID) et le mot de passe. Après avoir modifiĂŠ le nom du rĂŠseau Wi-Fi (SSID) et le mot de passe, le weBBoatÂŽ 4G Plus EVO sera redĂŠmarrĂŠ automatiquement. Fermez lâappli weBBoatÂŽ, reconnectez votre appareil mobile (ex., un smartphone) au nouveau rĂŠseau Wi-Fi du weBBoatÂŽ 4G Plus EVO, puis rouvrez lâappli.
ĂTAPE 12 Pour modifier le Mot de passe administrateur, appuyez sur le bouton menu (Fig. 14), puis sur ÂŤ Advanced settings Âť (Paramètres avancĂŠs). Dans la section ÂŤ Administrator Password Âť (Mot de passe administrateur), insĂŠrez le nouveau mot de passe administrateur dans les deux champs et appuyez sur le bouton ÂŤ Save Âť (Enregistrer). IMPORTANT : conservez le nouveau mot de passe dans un lieu sĂťr et ne lâoubliez pas. Si le mot de passe administrateur est perdu, Glomex vous suggère de restaurer lâappareil aux paramètres dâusine par dĂŠfaut en utilisant le bouton ÂŤ Reset Âť (RĂŠinitialiser) placĂŠ Ă lâarrière du routeur (Fig. 16). Pour restaurer lâappareil, appuyez et maintenez enfoncĂŠ le bouton ÂŤ Reset Âť (RĂŠinitialiser) pendant au moins 5 secondes. Le bouton ÂŤ Reset Âť (RĂŠinitialiser) peut ĂŞtre relâchĂŠ lorsque les 5 LED de force du signal (Fig. 17) sont allumĂŠes. Lorsque le weBBoatÂŽ 4G Plus EVO redĂŠmarre, il rĂŠinitialisera toutes les modifications du client aux dĂŠfauts dâusine. Fermez lâappli weBBoatÂŽ, reconnectez votre appareil mobile (ex., un smartphone) au rĂŠseau Wi-Fi du weBBoatÂŽ 4G Plus EVO, puis rouvrez lâappli.
ĂTAPE 13 Lorsque des mises Ă jour de la liste des microprogrammes et le base de donnĂŠes APN automatique sont disponibles, un bouton Mettre Ă jour apparaĂŽtra dans le menu ÂŤ System Updates Âť (Mises Ă jour du système) (Fig. 18). Appuyez sur le bouton ÂŤ Upgrade Âť (Mettre Ă jour) pour effectuer la mise Ă jour et attendez quelques minutes. IMPORTANT : Ă la fin de la mise Ă niveau du microprogramme, le weBBoatÂŽ 4G Plus EVO redĂŠmarrera automatiquement. Fermez lâappli weBBoatÂŽ, reconnectez votre appareil mobile (ex., un smartphone) au rĂŠseau Wi-Fi du weBBoatÂŽ 4G Plus EVO, puis rouvrez lâappli.VEUILLEZ NE PAS METTRE LE WEBBOAT 4G PLUS EVO SOUS TENSION AVANT LâINSTALLATION.
ĂTAPE 14 GESTION DES SMS LâĂŠlĂŠment de menu SMS (Fig. 14) affiche un nombre indiquant le nombre de SMS reçus et non lus sur la carte SIM active
dans le weBBoatŽ. En cliquant sur SMS, vous accÊdez à la section SMS oÚ vous pouvez lire les SMS reçus, surveiller votre crÊdit et, si la carte SIM est activÊe, envoyer des messages (Fig. 19).
10) zu speichern, tippen Sie im âEinrichtungsassistentenâ auf âSpeichernâ. Im Abschnitt âErweiterte Einstellungenâ befindet sich
ein Abschnitt âAutoswitch-Konfigurationâ (Abb. 11), in dem Sie den Betrieb des âAutoswitchâ -Modus anpassen kĂśnnen, indem Sie die Priorität der verschiedenen Internetquellen neu definieren: WLAN (Standardpriorität 1), Mobil (Standardpriorität 2) und SAT (Standardpriorität 3).
SCHRITT 9 Nach Antippen von âSpeichernâ wird automatisch die Systemsteuerung angezeigt. Dieser Abschnitt enthält alle signalrelevanten Informationen und die verwendete aktiv-SIM-Karte und APN (Abb. 13). Ist die Auto-Switch-Funktion nicht aktiviert, aktivieren Sie sie durch Antippen der Schaltfläche âAutoswitchâ (Abb. 13).
SCHRITT 10 In der âSystemsteuerungâ kĂśnnen Sie einige der folgenden Mobilbetriebsarten (Abb.13) auswählen. Auto: weBBoatÂŽ 4G Plus EVO ist mit dem Netzwerk verbunden, das zu einer besseren Internetanbindung fĂźhrt. Nur 4G: weBBoatÂŽ 4G Plus EVO ist nur mit dem 4G-Netzwerk verbunden. Nur 3G: weBBoatÂŽ 4G Plus EVO ist nur mit dem 3G-Netzwerk Verbunden. Sie kĂśnnen Ihre bevorzugte aktive SIM-Karte auswählen, indem Sie auf die SIM-Auswahl klicken (Abb. 13). Der Abschluss des SIM-Wechselvorgangs dauert ca. 15 Sekunden. Weitere MĂśglichkeiten zum Verwalten des Mobil- / WLAN-Betriebs, auf die Ăźber die Systemsteuerung zugegriffen werden kann, sind: Automatischer Schalter: wie in schritt 9 beschrieben. Nur fĂźr Mobilgeräte: Das weBBoat muss unabhängig von anderen verfĂźgbaren Internetquellen in Mobilgeräten arbeiten. Nur WiFi: Das weBBoat muss unabhängig von anderen verfĂźgbaren Internetquellen mit der ausgewählten WiFi-Quelle arbeiten. Nur SAT: Das weBBoat muss unabhängig von anderen verfĂźgbaren Internetquellen mit dem SAT-Eingang arbeiten HINWEIS: Bitte beachten Sie, dass andere in der Nähe befindliche WiFi-Netzwerke die Geschwindigkeit von weBBoatÂŽ 4G Plus EVO beeinträchtigen kĂśnnen.
SCHRITT 11 Um den Namen des von weBBoatÂŽ 4G Plus EVO (SSID) erzeugten WiFi-Netzwerks und das Passwort zu individualisieren, klicken Sie bitte auf die MenĂźtaste und danach auf âErweiterte Einstellungenâ (Abb.14) und wählen âErweiterte Einstellungenâ aus. Gehen Sie auf âWiFi-Konfigurationâ. Ăndern Sie im entsprechenden Feld die SSID und wählen den VerschlĂźsselungstyp aus. Geben Sie das Kennwort und tippen Sie auf Speichern (Abb. 15). EMPFEHLUNG: Wählen Sie WPA2 - PSK VerschlĂźsselung fĂźr mehr Sicherheit. HINWEIS: Verwenden Sie im Namen des WiFi-Netzwerks (SSID) und beim Passwort keine Leerzeichen oder Sonderzeichen. Nachdem der Name des WiFi-Netzwerks (SSID) und Passworts geändert wurde, wird weBBoat 4G Plus EVO automatisch neu gestartet. SchlieĂen Sie die die weBBoatÂŽ App, verbinden wieder Ihr Mobilgerät (zB Smartphone) mit dem neuen Wi-Fi-Netzwerk von weBBoatÂŽ 4G Plus EVO und Ăśffnen danach wieder die App.
SCHRITT 12 Zum Ăndern des Administrator-Passworts, klicken Sie auf die MenĂźtaste (Abb. 14) und danach auf âErweiterte Einstellungenâ. Geben Sie im Abschnitt âAdministrator-Passwortâ das neue Administrator-Passwort in beiden Feldern ein und bestätigen mit âSpeichernâ. WICHTIG: Bewahren Sie das neue Passwort sicher auf und vergessen es nicht. Wird das Administrator Passwort verloren, empfiehlt Glomex, das Gerät mit der auf der Router-RĂźckseite befindlichen Reset-Taste wieder herzustellen (Abb. 16). Um das Gerät wiederherzustellen, halten Sie die Reset-Taste mindestens 5 Sekunden gedrĂźckt. Die Reset-Taste kann losgelassen werden, wenn alle 5 Signalstärken-LEDs (Abb. 17) LEUCHTEN. Wenn weBBoatÂŽ 4G Plus EVO neu startet, werden alle kundenseitigen Ănderungen auf Werkseinstellungen zurĂźckgesetzt. SchlieĂen Sie die weBBoatÂŽ App, verbinden wieder Ihr Mobilgerät (zB Smartphone) mit dem Wi-Fi-Netzwerk von weBBoatÂŽ 4G Plus EVO und Ăśffnen danach wieder die App.
SCHRITT 13 Sind Aktualisierungen der Firmware und Auto APN Datenbank verfĂźgbar, wird im MenĂź âSystemaktualisierungenâ die Schaltfläche Aktualisieren angezeigt (Abb. 18). Tippen Sie auf âAktualisierenâ, um die Aktualisierung durchzufĂźhren, und warten ein paar Minuten. WICHTIG: Nach Abschluss des Firmware-Updates, startet weBBoatÂŽ 4G Plus EVO automatisch neu. SchlieĂen Sie die weBBoatÂŽ App, verbinden wieder Ihr Mobilgerät (zB Smartphone) mit dem Wi-Fi-Netzwerk von weBBoatÂŽ 4G Plus EVO und Ăśffnen danach wieder die App. SCHALTEN SIE WĂHREND DER INSTALLATION WEBBOAT 4G PLUS EVO NICHT AUS.
SCHRITT 14 SMS-MANAGEMENT Der MenĂźpunkt SMS (Abb. 14) zeigt eine Nummer an, die die Anzahl der empfangenen und ungelesenen SMS auf der im weBBoatÂŽ aktiv-SIM angibt. Durch Klicken auf SMS gelangen Sie in den Bereich SMS, in dem Sie die empfangene SMS lesen, Ihr Guthaben Ăźberwachen und bei aktivierter SIM-Karte Nachrichten senden kĂśnnen (Abb. 19).
(Fig. 12)(Fig. 11) (Fig. 13) (Fig. 14) (Fig. 15) (Fig. 19)(Fig. 18)
2
weBBoatÂŽ 4G Plus EVO QR Code
weBBoatÂŽ 4G Plus EVO S/N
FCC ID: 2AET4RUT950A
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
(Fig
. 16)
(Fig
. 17)