Embed Size (px)
Citation preview
WELCOME
TO
SHALOM ENTERPRISES
DOOR INTERLOCKING SYSTEM
DOOR INTER LOCKING SYSTEM We are glad to introduce ourselves as pioneers in manufacturing Door
interlocking system with micro controller/processor based with Electro Magnetic Locks to control cross contamination and air conditioning lossesi n clean rooms, sterile areas and pass boxes.
System Description: Interlocking system can control two or more doors in a way that to give
access to any one door and it will never allow to open any adjacent two doors simultaneously. The following are the most important characteristics of the interlocking system
Two Doors Closed mode: In this mode both doors are closed and locked by means of electro Magnetic Lock or Electric Door Strike. Anyone who wants to get the access can enter by passing the push button switch. When the first door is opened second door remain closed till the first one is closed i.e. both doors will not open simultaneously. There by you are preventing clean air contamination and you are saving air conditioning losses.
Two Door Open Mode: In this mode both doors are in normally closed
condition by means of door closure but unlocked. By opening door-1, door-2
automatically gets locked and will not open till the first door is closed.
Our control panels are available in 2-door, 4-door, 8-door & 16-door control
models.
In case of any emergency like fire, our system is coming with 2 relay outputs
one will open all the doors another relay close all the doors in special protection
areas.
According to your applications we will provide customized solutions. We are
satisfying our customers in pharmacy industry for the past 20 years by
providing accurate & adequate systems according to their requirement with
lowest possible prices.
Our Systems are very much applicable in the following areas.
Clean rooms
Pass boxes
Air locks
Pass through modules
Bio clean workbench
Air showers
Clean room garment locker
Operation theatres
ICU’s etc., DOOR INTERLOCKING SYSTEM
Switches
Electro Magnetic Locks
Door Interlocking Control Panel
Technical Specifications For Control Panel
SNO PARAMETER SPECIFICATIONS
1 Power supply 230V, ±10% 50 Hz single phase
2 Operating voltage 12V D.C
3 Absorbed Current 500mAmp for control panel
4 No. of manoeuvres in 24 h Continuous service
5 Environmental conditions -15° C to +60° C
6 Control unit weight 0.4kg
7 Enclosure M.S Body powder coated / SS
Technical Specifications For Feather Touch Switches
Operating voltage: 2.5V D.CAbsorbed Current: 30 mAmp
Technical Specifications For Magnetic Contact
Operating voltage : 3.5 V D.CAbsorbed Current : 25 mAmp
CONTACT USShalom Enterprises,
Plot No – 412, Mallareddy Nagar,Gajularamaram, Qutubullapur Mandal,
Hyderabad– 500 055, Ph : 040 – 3100 7374 /94,E mail : [email protected] [email protected]
Web : www.shalomsystems.net
Mumbai BranchMr. Mark Vyas
Cont: 9869083170 E mail: [email protected]
Web : www.shalomsystems.net
Thank You
