Shalom Enterprises

Door Interlocking System

SHALOM SECURITY PRODUCTS

We are glad to introduce ourselves as pioneers in

manufacturing Door interlocking system with

new micro controller based with Electro

Magnetic Locks to control cross contamination

in clean rooms and pass box.

System Description:

Interlocking system can control two or more

doors in a way that to give access to any one

door and it will never allow to open any adjacent

two doors simultaneously.

The following are the most important

characteristics of the interlocking

system:

Two Doors Closed mode: In this mode both

doors are closed and locked by means of

electro Magnetic Lock or Electric Door

Strike. Anyone who wants to get the access

can enter by passing the push button switch.

When the first door is opened second door

remain closed till the first one is closed i.e.

both doors will not open simultaneously.

There by you are preventing clean air

contamination and you are saving air

conditioning losses.

Two Door Open Mode: In this mode both

doors are normally unlocked condition. By

opening door-1, door- 2 automatically gets

locked and will not open till the first door is

closed.

Our control panels are available in 2-door, 4-

door, 8-door & 16-door control models.

DOOR INTERLOCKING SYSTEM

In case of any emergency like fire, our

system is coming with 2 relay outputs one

will open all the doors another relay close all

the doors in special protection areas.

According to your applications we will

provide customized solutions. We are

satisfying our customers in pharmacy industry

for the past 20 years by providing accurate

& adequate systems according to their

requirement with lowest possible prices

Our Systems are very much applicable in the

following areas:

1) Clean rooms

2) Pass boxes

3) Air locks

4) Pass through modules

5) Bio clean workbench

6) Air showers

7) Clean room garment locker

8) Operation theatres

9) ICU’s etc.,

Shalom Door Interlocking system

Control Panel

Electro Magnetic Door Locks and

Electric Door Strike

L, Z, & U Brackets

Door Interlocking Switches

TECHNICAL SPECIFIFCATIONS FOR CONTROL PANEL

S. No Parameter Specification

1 Power supply 230V, ±10% 50 Hz single phase

2 Operating voltage 12V D.C

3 Absorbed Current 500mAmp for control panel

4 No. of manoeuvres in 24 h Continuous service

5 Environmental conditions -15° C to +60° C

6 Degree of protection IP 55

7 Control unit weight 0.4kg

8 Enclosure M.S Body powder coated

TECHNICAL SPECIFIFCATIONS FOR FEATHER TOUCH SWITCHES

Operating voltage: 2.5V D.C

Absorbed Current: 30 mAmp

TECHNICAL SPECIFIFCATIONS FOR MAGNETIC CONTACT

Operating voltage : 3.5 V D.C

Absorbed Current : 25 mAmp

Shalom Enterprises, Plot No – 412, Mallareddy Nagar, Gajularamaram, Qutubullapur

Mandal, Hyderabad – 500 055, Ph : 040 – 3100 7374 / 3100 7394, email :

info@shalomsystems.net, mktg@shalomsystems.net, Web : www.shalomsystems.net

Mumbai Branch: Mr. Mark Vyas

Cont: 09869083170 E mail: mark@shalomsystems.net, Web : www.shalomsystems.net