3
The coaters want to know the advantages deriving from the corporate merger of two important companies in the world of chemical product manufacturing, such as Dollmar in Milan and Noxor in the Friuli region. Moreover, the coaters want to be acquainted with the results deriving from the aforesaid merger they may take advantage of in terms of quality, cheapness, development, etc. The aforesaid questions were asked to us by Anver members: they are reasonable mainly for the reader who wants to know what to expect in the near future and at medium term. We took the opportunity to answer these questions during the meeting by the two entrepreneurs, to hear from them what the user must expect as a result of research and development synergies in the field of metal pre-treatment before coating, as well as the treatment of water and the paint stripping of defective items. It is a very important technology that allows a complete recovery of the manufactured good that is defective due to incorrect coating without damaging the underlying metal surface or even the structure of the item. The companies Dollmar is a leading chemical factory that identifies its own 416 44_Verniciatura Industriale_518_giugno/june 2011 La Rivista del Colore Nuove sinergie New synergies Danilo O. Malavolti Anver – Vimercate (MB) Dollmar e Noxor insieme per l’innovazione nel settore del pretrattamento alla verniciatura DOLLMAR AND NOXOR TOGETHER TO INNOVATE THE COATING PRE-TREATMENT INDUSTRY Chi vernicia si chiede quali vantaggi potrebbero derivargli, dopo la con- centrazione aziendale che è avvenuta tra due aziende importanti nel mondo della fabbricazione di prodotti chimici quali la Dollmar milanese e la Noxor friulana, e di quali risultati di questa fusione potrebbe usufruire in fatto di qualità, economicità, sviluppo e così via. Per rispondere a questa ragionevole ri- chiesta, che alcuni associati dell’Anver ci hanno rivolto, ragionevole soprat- tutto per il lettore che vuole conoscere cosa deve aspettarsi nel futuro prossi- mo e a media scadenza, abbiamo colto l’occasione dell’incontro dei due imprenditori per sentire dalla loro voce quanto l’utilizzatore si deve aspettare co- me risultato delle sinergie di ricerca e sviluppo nel campo del pretrattamento dei metalli alla verniciatura, nonché del trattamento delle acque e della sverniciatura dei pezzi am- malorati. Quest’ultima è una tecnologia molto importante per recuperare completamente il manufatto difettato da una verniciatura mal riuscita senza danneggiare la sottostante superficie metallica o addirittura la struttura del pezzo. Le aziende Dollmar è un’industria chimica di primaria importanza, che

Dollmar E Noxor

Embed Size (px)

DESCRIPTION

 

Citation preview

The coaters want to know the advantages deriving from the corporate merger of two important companies in the world of chemical product manufacturing, such as Dollmar in Milan and Noxor in the Friuli region. Moreover, the coaters want to be acquainted with the results deriving from the aforesaid merger they may take advantage of in terms of quality, cheapness, development, etc.The aforesaid questions were asked to us by Anver members: they are reasonable mainly for the reader who wants to know what to expect in the near future and at medium term. We took the opportunity to answer these

questions during the meeting by the two entrepreneurs, to hear from them what the user must expect as a result of research and development synergies in the field of metal pre-treatment before coating, as well as the treatment of water and the paint stripping of defective items. It is a very important technology that allows a complete recovery of the manufactured good that is defective due to incorrect coating without damaging the underlying metal surface or even the structure of the item.

The companiesDollmar is a leading chemical factory that identifies its own

416 44_Verniciatura Industriale_518_giugno/june 2011La Rivista del Colore

Nuove sinergie New synergies

Danilo O. MalavoltiAnver – Vimercate (MB)

Dollmar e Noxor insieme per l’innovazione nel settore del pretrattamento alla verniciatura

DOLLMAR AND NOXOR TOGETHER TO INNOVATE THE COATING PRE-TREATMENT INDUSTRY

Chi vernicia si chiede quali vantaggi potrebbero derivargli, dopo la con-centrazione aziendale che è avvenuta tra due aziende importanti nel mondo della fabbricazione di prodotti chimici quali la Dollmar milanese e la Noxor friulana, e di quali risultati di questa fusione potrebbe usufruire in fatto di qualità, economicità, sviluppo e così via.Per rispondere a questa ragionevole ri-chiesta, che alcuni associati dell’Anver ci hanno rivolto, ragionevole soprat-tutto per il lettore che vuole conoscere cosa deve aspettarsi nel futuro prossi-mo e a media scadenza, abbiamo colto l’occasione dell’incontro dei due imprenditori per sentire dalla loro voce quanto l’utilizzatore si deve aspettare co-me risultato delle sinergie di ricerca e sviluppo nel campo del pretrattamento dei metalli alla verniciatura, nonché del trattamento delle acque e della sverniciatura dei pezzi am-malorati. Quest’ultima è una tecnologia molto importante per recuperare completamente il manufatto difettato da una verniciatura mal riuscita senza danneggiare la sottostante superficie metallica o addirittura la struttura del pezzo.

Le aziendeDollmar è un’industria chimica di primaria importanza, che

“core business” in the following industries:� degreasing and industrial cleaning� metal pre-treatment� manufacture of polyurethane and epoxy resins� environmental consultancy� pre-coating cleaning plant engineering

Noxor offers its specialisation in the field of metal pre-treatment chemical products, as well as in the field of treating industrial wastewater and other contaminants, such as greasy deposits deriving from cleaning operations and paints. They are completed by paint removers, which assure great care to the environment.As a confirmation of the internationalisation process in progress and to complete a collaboration relationship starting from the first years of 2000, with exchange of ideas and collaborations, it was absolutely necessary to combine the activities of the two companies. They are strongly growing, have credit balances and are perfectly symmetrical as for markets and technologies.The agreement allows Dollmar and Noxor to be fully operating in Italy, Europe, Brazil, Mexico and Argentina to search for:� better market synergies� wider technological innovations� ability of research, service and presence at Italian, European and international level.

Objectives

After these promises, we tried to understand the technological advantages that may derive from this Milan-Friuli mix for the coaters. Therefore, we interviewed the managers of the two companies, André Bernasconi and Gianluca Pinna (fig. 1), who brought us up to date about the advantages that the synergies of this relationship will surely guarantee to industry users.«In the agreement – Pinna explains – we divided the tasks to favour who needs to renew its own pre-treatment tunnel to remove the problems of sludge creation, slaked degreasing solutions, and to replace zinc phosphating agents that contain carcinogenic nickel salts, etc.Therefore, Dollmar will be in charge of supplying metal pre-treatment nanotechnologies, together with the Soft Rain nebulizing them, which is capable of removing any type of liquid dragging between the tanks, reducing the use of demineralised water to a few litres, without creating any waste sludge, and so on.In its turn, Noxor will be in charge of supplying all products to treat wastewater and the water in the spraying booths, with the relevant overspray, in addition to the innovative paint removers with low environmental impact, which are very useful to remove not only the films that are hardened in hooks (this is a well-known and easy-to-use technology), but mainly the damaged coatings applied on the items, whose finishing quality is rejected by the quality control.”

41744_Verniciatura Industriale_518_giugno/june 2011La Rivista del Colore

identifica il proprio “core business” nei settori dello:� sgrassaggio e lavaggio industriale� pretrattamento metallico� produzione di resine epossidiche e poliuretaniche� consulenza ambientale � impiantistica di lavaggio preverniciatura

Noxor offre una specializzazione, oltre che nel campo dei prodotti chimici di pretrattamento metallico, nel settore del trattamento delle acque reflue industriali e di altri contami-nanti quali morchie di pulitura e vernici liquide. A questo si aggiungono quelle degli svernicianti, che assicurano una completa attenzione verso l’ambiente.A conferma del processo di internazionalizzazione in atto e a completamento di un rapporto di collaborazione a partire dai primi anni 2000, con scambi di idee e collaborazioni, è stato quasi giocoforza mettere assieme le attività delle due società, che sono in ampia crescita, con bilanci economici at-tivi e che sono aziende speculari per mercati e tecnologie.L’accordo avvenuto permette a Dollmar e Noxor di comple-tare la propria presenza in Italia, in Europa, in Brasile, in Messico, in Argentina per ricercare:� migliori sinergie di mercato� più ampie introduzioni tecnologiche� capacità di ricerca, servizio e presenza a livello italiano, europeo e mondiale.

Obbiettivi

Fatte queste premesse, abbiamo cercato di capire quali van-taggi tecnologici potrebbero derivare da questo mix milane-se-friulano per l’utilizzatore di vernici. Abbiamo così inter-vistato i responsabili delle due società, André Bernasconi e Gianluca Pinna (fig. 1), che ci hanno aggiornato sui vantaggi che le sinergie di questo rapporto faranno ricadere sicura-mente sugli utenti del settore.«Nell’accordo – ci dice Pinna – abbiamo suddiviso i compi-ti per avvantaggiare chi deve aggiornare il proprio tunnel di pretrattamento per eliminare i problemi di creazione di fanghi, soluzioni sgrassanti spente, sostituire i fosfatanti allo zinco, che contengono i sali di nichel cancerogeno e così via.Così sarà cura della Dollmar fornire le nanotecnologie di pretrattamento metallico, insieme al Soft Rain che le nebu-lizza, in grado di eliminare ogni tipo di trascinamento liqui-di da una vasca all’altra, di ridurre a pochi litri l’utilizzo di acqua demineralizzata, di non creare alcun rifiuto fangoso e così via.Sarà invece cura della Noxor fornire tutti i prodotti di trat-tamento delle acque reflue e delle acque di cabina di spruz-zatura, con il loro eccesso di overspray, oltre agli innovativi svernicianti, a basso impatto ambientale, che sono molto utili per la rimozione non solo dei film induriti sui ganci (questa è la tecnologia nota e di facile utilizzo), ma soprattutto delle vernici ammalorate applicate sui pezzi, la cui qualità di fini-tura viene scartata dal controllo di qualità».«Così sarà possibile affrontare questi mercati – ci conferma

«Therefore, it will be possible to deal with these specific markets – André Bernasconi confirms – with the purpose of developing the activities in two-digit percentages by using the most innovative technologies that are available from the two companies. Dollmar made an important choice: it decided to be present on the market of Northern Italy covering North-Eastern and Friuli regions, thanks to the indispensable supply of Noxor experience, one of the leading Italian companies in its own industry».«It is of great technological help – Pinna explains – for users-customers, as they will be granted the support by the company that “invented” the Soft Rain. It is an application revolution in nanotechnologies that technically, economically, and qualitatively replaces the traditional cycle in the pre-treatment tunnel, thus reducing investment and effectiveness costs in an extraordinary way, according to me».

Conclusion

Dollmar and Noxor created an extremely interesting union for all coaters; indeed, the concepts that characterise this corporate agreement are as follows:� complete presence all over Italy in the chemical pre-treatment industry for coating surfaces, treatment of water and paint removal with research and development abilities� competence, assistance and consulting in innovative industries� quality of the service for any type of factory.

An agreement of this type demonstrates clear advantages for the coaters that, this way, always dispose of the correct solution at the right time, thus being able to assure a safe future to its own entrepreneurial activity and employees.

� Mark 10 on information card

418 44_Verniciatura Industriale_518_giugno/june 2011La Rivista del Colore

André Bernasconi - con l’obbiettivo di svilup-pare queste attività con percentuali a due cifre, utilizzando le più innovative tecnologie dispo-nibili dalle due aziende. La Dollmar ha così operato una scelta importante: di essere presen-te nel mercato del Nord Italia, coprendo il Nord Est e il Friuli, grazie all’apporto imprescindibile dell’esperienza Noxor, tra le prime in Italia nel proprio settore».«E questo sarà di grande aiuto tecnologico – conferma Pinna – ai clienti utilizzatori, in quan-to essi sapranno di avere per scelta il supporto di un’azienda che ha “inventato” il Soft Rain, una rivoluzione applicativa delle nanotecno-logie che sostituisce tecnicamente, economi-camente, qualitativamente il tradizionale ciclo nel tunnel di pretrattamento, riducendo costi d’investimento e di operatività, in modo, direi, straordinario».

Conclusione

Con Dollmar e Noxor nasce quindi un’unione di notevole interesse per tutti coloro che ver-niciano. Infatti, i concetti che hanno permeato questo accordo aziendale, e cioè:� presenza completa in tutta Italia nel settore del pretrattamento chimico delle superfici alla verniciatura, del trattamento delle acque e della sverniciatura con capacità di ricerca e sviluppo� competenza, assistenza e consulenza nei set-tori innovativi� qualità del servizio per ogni tipo di industria, dimostrano il vantaggio degli accordi tra azien-de per l’utilizzatore che vernicia, che dispone così in qualsiasi momento della soluzione giu-sta al momento giusto per poter dare un futuro sicuro alla sua attività imprenditoriale e ai suoi dipendenti.

� Segnare 10 su cartolina informazioni