Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
D/N ATR 700TVL VARI-FOCAL IR CAMERACMR7484X/7488X2.2 N/P & CMR7484X/7488X2.5 N/P & CMR7484X/7488X3.6 N/P
CMR7484X/7488X2.4 N/P
MERIT LILIN ENT. CO., LTDhttp://www.meritlilin.com 66-CMR748CSE
INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
1. Read Instructions
All the safety and operating instructions should be read before the unit is operated.
2. Retain Instructions
The safety and operating instructions should be retained for future reference.
3. Head Warnings
All warnings on the unit and in the operating instructions should be adhered to.
4. Follow Instructions
All operating and user instructions should be followed.
5. Electrical Connections
Only a qualified electrician should make electrical connections.
6. Attachments
Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7. Cable Runs
All cable runs must be within permissible distance.
8. Mounting
This unit must be properly and securely mounted to a supporting structure capable of sustaining the weight
of the unit.
SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT OPEN COVER.NO USER SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within anequilateral triangle, is intended to alert the user to thepresence of uninsulated "dangerous voltage" within theproduct's enclosure that may be of sufficient magnitude
The exclamation point within an equilateral triangle isintended to alert the user to the presence of importantoperating and maintenance (servicing) instructions in
to constitute a risk of electric shock to persons.
the literature accompanying the unit.
UNPACKING
Unpack carefully. Electronic components can be damaged if improperly handled or dropped. If an item appears
to have been damaged in shipment, replace it properly in its carton and notify the shipper.
Be sure to save:
1. The shipping carton and packaging material. They are the safest material in which to make future shipments
of the equipment.
2. This Installation and Operating Instruction.
SERVICE
If the unit ever needs repair service, the customer should contact our dealer or branch for authorization to
return and shipping instructions.
1
Part Description & Dimension
SUN SHIELD
TO P CO VER
BO TTO M CHASSIS
BRACKET
PAN ADJ USTM ENT SCREW
TI LT ADJ UST M ENT SCREW
WI NDO W
105
109
200
231
160
90
Unit : mm
INSTALLATION
1. Take out the bracket f rom the box f i rs t . Put the power cable and v ideo cable through the bracket and then f ix i t to the wal l (F IG.1 & FIG.2) .
F IG .1 F IG .2
2
2. Secondly, take out the camera body and open the top cover wi th screw dr iver (FIG.3) .
F IG .3
3. Put the power cable and v ideo cable through the bracket rubble f i rs t and then go
through the bot tom of camera body (FIG.4) . P lug and f ix the power cable to the
terminal and p lug the v ideo cable to v ideo output o f the camera (FIG.5) .
F IG .4
L N
Note :
When using two-cord
power cable, please
connect them to
"Live" and "Neutral".
Live
Ear
th
Neu
tral
F IG .5
F IG .6
4. Next , use the prov ided M5.0x10 screws (s i lver -2pcs) to f ix the camera body on the bracket wi th screw dr iver (FIG.6) .
3
5. Loosen the pan and t i l t ad justment screw on the bracket to turn the camera body to the des i red angle and then t ighten the screw (FIG.7) .
F IG .7
6. F i rs t , ad just the lens on focus and zoom to form the opt imal v ideo image af ter that
t ighten the screws (FIG.8) . Then adjust the OSD menu.
Please re fer to page5 ~page17.
RIGHTLEFT
DOWN
UP
SET
FOC U S o r ZOOMZOOM o r FOC U S
6-1. USER OSD SETTING
S
A. (UP)
B. (LEFT)
et t ing swi tches and Funct ions.
: Press to move the cursor upwards
or to se lect i tems.
: Press to move the cursor to the
le f t and to se lect or ad just the
parameters o f the se lected i tem.
The parameters changes each
t ime th is but ton is pressed.
RIGHTLEFT
DOWN
UP
SET
F IG .8
F IG .9 F IG .1 0
4
C. (RIGHT)
D. (DOWN)
E. SET : Executes se lect ions and d isp lays a submenu for an i tem wi th the
mark.
: Press to move the cursor to the r ight and to se lect or
ad just the parameters o f the se lected i tem.
The parameters changes each t ime th is but ton is pressed.
: Press to move the cursor downwards or to se lect i tems.
7. Replace the top cover and t ighten the screws (FIG.9 & FIG.10) .
CONFIGURATION OF THE MENU
SETUPMENU
LENS
SHUTTER/AGC
WHITE BAL
ATR
PICT ADJUST
BACKLIGHT-BLC HLC OFF/ /
AUTO
AUTO
ATW
OFF
MIRROR-OFF/ ON
B-GAIN(000~255)
B-GAIN(000~255)
LUMINANCE-LOW MID HIGH/ /
SPEED(000~255)
MANUAL
MANUAL
PUSH
ON
BRIGHTNESS(000~255)CONTRAST(000~255)SHARPNESS(000~255)HUE(000~255)GAIN(000~255)
R-GAIN(000~255)
R-GAIN(000~255)
CONTRAST-LOW MIDLOW MID MIDHIGH HIGH/ / / /
DELAY CNT(000~255)
USER 1
USER 2
ANTI CRMANUAL-LEVEL(000~255)PUSH LOCK
ATW FRAME-x0.50 x1.00 x1.50 x2.00/ / /
ENVIRONMENT-INDOOR OUTDOOR/
HIGH LUMINANCE
LOW LUMINANCE
MODE-SHUT+AGCSHUTTER-1/60(1/50) 1/100(1/120) 1/250~1/10000/ /
AGC-6.00 12.00 18.00 24.00 30.00 36.00 42.00 44.80/ / / / / / /
MODE
MODE-AGC OFF/BRIGHTNESS(000~255)
BRIGHTNESS-x0.25 x0.50 x0.75 x1.00/ / /
AUTO IRIS/ SHUT+AUTO IRIS
SHUT (NOTES*2)
MODE-AUTO OPEN CLOSE/ /
SPEED(000~255)
TYPE-DC
5
(NOTES*1)
PRIVACY
NR
CAMERA ID
SYNC-INT
LANGUAGE-ENGLISH ESPANOL/ 中文
/ 日本語/ DEUTSCH/ FRANCAIS/ PYCCK / PORTUGUES/
OFF
NR MODE-Y/C/ OFF/ Y/ C
OFF
AREA SEL-1/8~8/8ON
Y LEVEL(000~015)
ON
C LEVEL(000~015)
TOP [000~244(NTSC), 000~288(PAL)]BOTTOM [000~244(NTSC), 000~288(PAL)]LEFT [000~474(NTSC), 000~468(PAL)]RIGHT [000~474(NTSC), 000~468(PAL)]COLOR(1~8)TRANSP-0.00 0.50 0.75 1.00/ / /
MOSAIC-OFF ON/
NN^
~
^
CAMERA RESET
6
*1:The LENS option appear on the SETUP MENU menu, and then set the LENS mode to AUTO on the SETUP MENU menu.*2:The LENS option disappear on the SETUP MENU menu or set the LENS mode to MANUAL on the SETUP MENU menu.
NOTES
TO Open and Ex i t the Menu screen
SETTING MENU AND FUNCTIONS
1. Press "SET" but ton.
The Menu screen appears on the moni tor. Check the current set t ings on the menu.
2. Push or but ton to se lect the opt ions then use or but ton to se lect a mode.
NEXT: To the next setup menu.
BACK: Return to the prev ious.
RETURN: Return to the prev ious.
SAVE ALL: Used to save the var ious set t ing of the in terna l OSD menu in the
EEPROM together.
EXIT: Ex i t the setup menu.
SETUP MENU
AUTOAUTOATWBLC
OFFOFF
LENSSHUTTER/AGCWHITE BALBACKLIGHTPICT ADJUSTATRPRIVACY
NEXTEXIT SAVE ALL
SETUP MENU
OFFINTENGLISH
NRCAMERA IDSYNCLANGUAGECAMERA RESET
BACKEXIT SAVE ALL
LENS
This funct ion is used to set the mechanica l i r is o f the lens.
1. Select [LENS] opt ion.
2. Push or but ton to se lect a mode.
LENS mode changes as fo l lows:
AUTO: Select the auto i r is lens.
MANUAL: Select the manual i r is lens.
3. Select an AUTO then press "SET" but ton.
The AUTO IRIS menu appears.
AUTO → MANUAL
AUTO IRIS
DCAUTO 080
TYPEMODESPEED
RETURN
7
AUTO (AUTO IRIS)
FUNCTION OPTION DESCRIPTION
TYPE
SPEED
MODE
DC
000~255
AUTO
OPEN
CLOSE
Sets the type of mechanica l i r is .
DC: Di rect dr ive s ignal .
Sets the convergence speed of the
mechanica l i r is .
Sets the type of cont ro l to be exerc ised over
the mechanica l i r is .
AUTO: The mechanica l i r is is cont ro l led
automat ica l ly.
OPEN: The mechanica l i r is is f ixed to open.
CLOSE: The mechanica l i r is is f ixed to c lose.
1. Without LENS option in the CMR7484X/7488X2.2N/P & CMR7484X/7488X2.5N/P.2. Only DC mode on the TYPE option. Because a DC auto iris lens is used with the CMR7484X/7488X2.4N/P & CMR7484X/7488X3.6N/P.
NOTES
SHUTTER/AGC
This funct ion is used to set AE(Auto Exposure) or ME(Manual Exposure) .
1 . Select [SHUTTER/AGC] opt ion.
2. Push or but ton to se lect an AUTO or MANUAL, then press "SET" but ton.
The AUTO SETUP or MANUAL SETUP menu appears.
SHUTTER/AGC mode changes as fo l lows:
AUTO: Select the AE cont ro l .
MANUAL: Select the ME cont ro l .
AUTO → MANUAL
AUTO SETUP
SHUT+AUTO IRIS 024
AGCx0.50
HIGH LUMINANCE
BRIGHTNESS
LOW LUMINANCEMODEBRIGHTNESS
RETURN
MODE
8
AUTO SETUP
SHUT 024
AGCx0.50
HIGH LUMINANCE
BRIGHTNESS
LOW LUMINANCEMODEBRIGHTNESS
RETURN
MODE
9
AUTO (AE)
FUNCTION OPTION DESCRIPTION
HIGH
LUMINANCE
AUTO IRIS
SHUT+AUTO IRIS
1. The LENS opt ion appear on the SETUP
MENU menu, and then set the LENS mode to
AUTO on the SETUP MENU menu.
2. Speci f ies AE cont ro l on the medium and h igh
br ightness s ide.
AUTO IRIS: F ixed e lect ron ic shut ter.
[1 /60sec. (NTSC), 1 /50sec. (PAL) ]
SHUT+AUTO IRIS: Auto e lect ron ic shut ter.
[1 /60sec. (1 /50sec. )~1/100,000sec. ]
MODE
SHUT
000~255
1. The LENS opt ion d isappear on the SETUP
MENU menu or set the LENS mode to
MANUAL on the SETUP MENU menu.
2. Speci f ies AE cont ro l on the medium and h igh
br ightness s ide.
SHUT: Auto e lect ron ic shut ter.
[1 /60sec. (1 /50sec. )~1/100,000sec. ]
Speci f ies the medium and h igh br ightness s ide
reference.
BRIGHTNESS
LOW
LUMINANCE
AGC
OFF
Speci f ies AE cont ro l on the low br ightness s ide.
AGC: AGC ON
OFF: AGC OFF
MODE
x0.25
x0.50
x0.75
x1.00
Speci f ies the low br ightness s ide re ference.BRIGHTNESS
Set t ing of shut ter speed of AUTO IRIS mode
Please set -up proper shut ter speed for AUTO IRIS mode as be low:
SHUTTER/AGC: AUTO[SETUP MENU] → SET MODE: AUTO IRIS[AUTO SETUP]
→ RETURN → SHUTTER/AGC: MANUAL[SETUP MENU] → SET → SHUTTER:
1/60(1/50) or 1 /100(1/120) or 1 /250. . . . . [MANUAL SETUP] → RETURN → SHUTTER/
AGC: AUTO[SETUP MENU] → SAVE ALL → SET → EXIT
→
MANUAL (ME)
FUNCTION OPTION DESCRIPTION
MODE SHUT+AGC "SHUT+AGC" is the on ly opt ion avai lab le for
the ME operat ion mode. There are no other
opt ions.
MANUAL SETUP
SHUT+AGC1/606.00
MODESHUTTERAGC
RETURN
AGC
SHUTTER
6.00
12.00
18.00
24.00
30.00
36.00
42.00
44.80
1/60(NTSC), 1 /50(PAL)
1/100(NTSC), 1 /120(PAL)
1/250
1/500
1/1000
1/2000
1/4000
1/10000
Sets the AGC value(dB) for ME.
Sets the ME shut ter speed( in f ract ions of a
second) .
Please select AUTO mode on the SHUTTER/AGC option. If you select MANUAL mode, theover exposure may occur.
NOTE
10
WHITE BAL (WHITE BALANCE)
This funct ion is used to set the whi te ba lance operat ion mode.
1. Select [WHITE BAL] opt ion.
2. Push or but ton to se lect a mode.
WHITE BAL mode changes as fo l lows:
ATW → PUSH USER1 USER2 ANTI CR
PUSH LOCK ← MANUAL
→ → →
ATW
239 016x1.00INDOOR
SPEEDDELAY CNTATW FRAMEENVIROMENT
RETURN
ATW (Auto Track ing Whi te ba lance)
This funct ion automat ica l ly t racks the changes in the co lor temperature, and
adjusts the whi te ba lance.
The co lor temperatures ranging f rom 1800K to 10500K.
FUNCTION OPTION DESCRIPTION
SPEED
DELAY CNT
000~255
000~255
Adjusts the pu l l - in speed of ATW.
Sets the t ime-based hysteres is o f ATW.
11
ATW FRAME
ENVIROMENT
x0.50
x1.00
x1.50
x2.00
INDOOR
OUTDOOR
Sets the pu l l - in f rame magni f icat ion.
Sets the pu l l - in f rame( indoor /outdoor) o f ATW.
INDOOR: Select the indoor pu l l - in f rame.
OUTDOOR: Select the outdoor pu l l - in f rame.
PUSH (Ful l pu l l - in)
This funct ion ad justs the whi te ba lance regard less of the subject condi t ions.
USER2 WB
045 026
B-GAINR-GAIN
RETURN
USER1 WB
029 034
B-GAINR-GAIN
RETURN
USER1
The gain va lues for the outdoor f ixed mode are used as the ad justment i tems
of USER1 on the in terna l OSD menu.
12
USER2
The gain va lues for the f luorescent l ight f ixed mode are used as the ad justment
i tems of USER2 on the in terna l OSD menu.
FUNCTION OPTION DESCRIPTION
B-GAIN
R-GAIN
000~255
000~255
Used for the B ga in operat ion in the WB f ixed
gain mode.
Used for the R gain operat ion in the WB f ixed
gain mode.
ANTI CR (Color Rol l ing suppress ion)
This funct ion min imizes the co lor changes(co lor ro l l ing) over long per iods
caused by very smal l d i f ferences between the f l icker f requency of non- inver ter
f luorescent l ights and the dr ive f requency of the image sensor dev ices.
MANUAL (Manual WB)
The B and R gain va lues for manual WB are set on th is screen.
MANUAL WB
058LEVEL
RETURN
FUNCTION OPTION DESCRIPTION
LEVEL 000~255 Sets the B and R gain va lues for manual WB.
By increment ing or decrement ing the B ga in
va lue, the R gain va lue is a lso ad justed in
tandem.
PUSH LOCK (Hold)
The WB gain leve l estab l ished when operat ion has t ransfer red to the PUSH
LOCK mode is he ld .
1 . Push or but ton to se lect [PUSH LOCK] Mode then press "SET" but ton.
13
BACKLIGHT (BACKLIGHT Compensat ion)
This funct ion is used to set the back l ight compensat ion operat ion.
1. Select [BACKLIGHT] opt ion.
2. Push or but ton to se lect a mode.
BACKLGIHT mode changes as fo l lows:
BLC: Back l ight compensat ion ON.
HLC: HLC(High L ight Compensat ion) funct ion ON
High L ight Compensat ion(HLC) is a funct ion
that improves the v isual recogni t ion of
l i cense p la tes and other such ob jects by suppress ing or mask ing s t rong
hight sources(such as the headl ights o f automobi les) in dark p laces.
OFF: Back l ight Compensat ion OFF.
BLC → HLC OFF→
SETUP MENU
AUTOAUTOATW
OFFOFF
BLC
LENSSHUTTER/AGCWHITE BAL
PICT ADJUSTATRPRIVACY
NEXTEXIT SAVE ALL
BACKLIGHT
PICT ADJUST (PICTURE ADJUST)
1. Select [PICT ADJUST] opt ion and press "SET"
but ton. The PICT ADJUST menu appears.
2. Push or but ton to se lect a mode or set the
funct ion leve l (000~255) .
PICT ADJUST mode changes as fo l lows:
MIRROR → BRIGHTNESS CONTRAST
GAIN ← HUE ← SHARPNESS
→
PICT ADJUST
OFF 000 128 128 128 128
MIRRORBRIGHTNESSCONTRASTSHARPNESSHUEGAIN
RETURN
FUNCTION OPTION DESCRIPTION
BRIGHTNESS
CONTRAST
SHARPNESS
HUE
GAIN
MIRROR
000~255
000~255
000~255
000~255
000~255
OFF
ON
Sets the screen br ightness.
Sets the screen cont rast .
Sets the screen sharpness.
Adjusts the hue.
Adjusts the ga in .
Sets the hor izonta l f l ip for the d isp lay output .
OFF: Normal output .
ON: Hor izonta l f l ipped output
ATR (Adapt ive Tone Reproduct ion)
The ATR(Adapt ive Tone Reproduct ion) funct ion prov ides gradat ion compensat ion to
improve the cont rast o f sub jects whose gradat ion has been lost in cases where, for
ins tance, both low- louminance areas and h igh- luminance areas ex is t in the same
pic ture.
1. Select [ATR] opt ion.
2. Push or but ton to se lect a ON and press "SET"
but ton. The ATR menu appears.
3. Push or but ton to set the luminance leve l and
contrast leve l .
LUMINANCE leve l changes as fo l lows:
CONTRAST leve l changes as fo l lows:
LOW → MID HIGH→
ATR
LOWLOW
LUMINANCECONTRAST
RETURN
LOW → MIDLOW MID MIDHIGH HIGH→ → →
14
FUNCTION OPTION DESCRIPTION
LUMINANCE
CONTRAST
LOW
MID
HIGH
LOW
MIDLOW
MID
MIDHIGH
HIGH
Sets the extent o f the luminance compress ion.
Sets the extent o f the cont rast enhancement .
This funct ion is used to set up to e ight pr ivacy masks.
1. Select [PRIVACY] opt ion.
2. Push or but ton to se lect a ON and press
"SET" but ton. The PRIVACY menu appears.
3. Push or but ton to se lect a mode or set the
mask f rame pos i t ion.
PRIVACY
PRIVACY
1/8 020 070 020 09081.00OFF
AREA SEL TOP BOTTOM LEFT RIGHTCOLORTRANSPMOSAICRETURN
15
FUNCTION OPTION DESCRIPTION
AREA SEL
TOP
BOTTOM
LEFT
RIGHT
1/8, 2 /8 , 3 /8 , 4 /8 ,
5 /8 , 6 /8 , 7 /8 , 8 /8 ,
000~244(NTSC)
000~288(PAL)SI
000~244(NTSC)
000~288(PAL)SI
000~474(NTSC)
000~468(PAL)SI
000~474(NTSC)
000~468(PAL)SI
Selects the mask f rame to be ad justed.
Sets the top s ide of the mask f rame se lected
by the AREA SEL parameter.
Sets the bot tom s ide of the mask f rame
selected by the AREA SEL parameter.
Sets the le f t s ide of the mask f rame se lected
by the AREA SEL parameter.
Sets the r ight s ide of the mask f rame se lected
by the AREA SEL parameter.
COLOR 1~8 Sets the co lors o f the mask f rames.
TRANSP
MOSAIC
0.00
0.50
0.75
1.00
OFF
ON
Sets the t ransparency ra t io o f the mask f rames.
The same t ransparency ra t io va lue is set for
a l l the mask f rames.
Sets the mask f rame mosaic funct ion to ON or
OFF.
OFF: Mosaic funct ion OFF.
ON: Mosaic funct ion ON.
NR (Noise Reduct ion)
This funct ion is used to set the no ise reduct ion.
1. Select [NR] opt ion and press "SET" but ton.
The NR menu appears.
2. Push or but ton to se lect one of four modes
for NR or set the d i f ferent f i l te r s t rength.
NR mode changes as fo l lows:
NR
Y/C 004 004
NR MODEY LEVELC LEVEL
RETURNY/C → OFF Y C→ →
FUNCTION OPTION DESCRIPTION
NR MODE Y/C
OFF
Y
C
Sets the 2D NR f i l ter mode.
Y/C: Y and C f i l ters ON.
OFF: Through
Y: Y f i l ter ON.
C: C f i l ter ON.
Y LEVEL
C LEVEL
000~015
000~015
Sets the Y f i l ter s t rength.
Sets the C f i l ter s t rength.
16
CAMERA ID
This funct ion is used to set the camera ID.
1. Select [CAMERA ID] opt ion.
2. Use or but ton to se lect a ON and press "SET" but ton. The CAMERA ID menu
appears.
CAMERA ID
RETURN
A
(
W
B
)
X
C
_
Y
D
、Z
E
,
0
F
¥1
G
:
2
H
;
3
I
<
4
J
=
5
K
>
6
L
?
7
M
@
8
N
9
O
^
-
P
*
!
Q
.
"
R
x
#
S
+
$
T
/
%
U
&
V
'¥
CHR1 CHR2
CLR POS
CAMERA ID
RETURN
大門廳走道倉庫口安全樓梯園電巷路區室地防火左
右鄰里弄號辦公攝影機前後側房廠車段村
CHR1 CHR2
CLR POS
1
3. Use , , or but ton to se lect a le t ter, numera l or symbol .
* (B lank) : Inser ts a space at the cursor pos i t ion.
*CHR1: Let ters A to Z, numera ls 0 to 9 , symbols .
*CHR2: 40 t rad i t ional Chinese.
* : Moves cursor to le f t , r ight , up or down.
*CLR: I f you enter the wrong code, se lect CLR then press "SET" but ton.
*POS: Use , , or but ton to move pos i t ion of CAMERA ID on the screen.
1
SYNC
This funct ion is used to d isp lay the current synchronizat ion mode. The SYNC mode
is f ixed to the INT( In terna l synchronizat ion) .
SETUP MENU
OFF
ENGLISHINT
NRCAMERA ID
LANGUAGECAMERA RESET
BACKEXIT SAVE ALL
SYNC
17
CAMERA RESET
This funct ion is in i t ia l izes a l l the in terna l OSD menu set t ing together.
1 . Select [CAMERA RESET] opt ion.
2. Press "SET" but ton to reset the camera set t ing to in i t ia l set t ing.
3. Select [SAVE ALL] opt ion on the [SETUP MENU] menu. Press "SET" but ton.
SETUP MENU
OFFINTENGLISH
NRCAMERA IDSYNCLANGUAGE
BACKEXIT SAVE ALL
CAMERA RESET
LANGUAGE
This funct ion is used to se lect the language in which to d isp lay the in terna l OSD
menu.
1. Select [LANGUAGE] opt ion.
2. Push or but ton to se lect a language.
SETUP MENU
OFFINTENGLISH
NRCAMERA IDSYNC
CAMERA RESET
BACKEXIT SAVE ALL
LANGUAGE
Model No.
Lens
Power Input Vol tage
System
Sync. Mode
Menu Contro l
P ick Up Element
Effect ive Pixe ls
Chip Size
Hor izonta l & Ver t ica l
Sync. Frequency
Scanning System
Resolut ion
Min imum I l luminat ion
Shut ter
Adapt ive Tone
Reproduct ion
S/N Rat io
Auto Gain Contro l
Whi te Balance
Noise Reduct ion
Pic ture Adjust
Pr ivacy Masking
Pr ivacy Masking Zone
OSD Language
Power Consumpt ion
Back L ight Compensat ion
Video Output
Operat ing Temperature
Gamma Character is t ic
IP Rat ing
Window
Inf rared
LEDBeam Spread
Peak Wavelength
Focal Length
I r is
Angle of v iew
H
Auto
Luminance
V
Manual
Contrast
D
CMR7484X2.2N/P
0.045Lux / F1.4, 0Lux ( IR ON)
1/60(1/50)S ~ 1/100,000S
LOW / MID / HIGH
1/60(1/50)S, 1/100(1/120)S, 1/250S, 1/500S, 1/1,000S, 1/2,000S, 1/4,000S, 1/10,000S
LOW / MIDLOW / MID / MIDHIGH / HIGH
NTSC or PAL
AC24V ( 10%)±
In terna l
OSD Contro l
1 /3" Exv iew HAD CCD Sensor
976(H) x 494(V) [NTSC]
976(H) x 582(V) [PAL]
5.58mm(H) x 4 .67mm(V)
15.734 KHz / 59.94Hz [NTSC]
15.625 KHz / 50Hz [PAL]
2:1 In ter lace
700TV L ines
More Then 50dB (AGC-OFF)
AUTO / MANUAL
ATW / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH LOCK
Y / C / Y/C / OFF
MIRROR / BRIGHTNESS / CONTRAST / SHARPNESS / HUE / GAIN
ON / OFF
8 Zones
ENGLISH/JAPANESE/GERMANS/FRENCH/RUSSIAN/PORTUGUESE/SPANISH/SIMPLY CHINESE
9.5W
BLC / HLC(High L ight Compensat ion) / OFF
IP66
ψ92 Heat Resistant Glass
850nm
30°
CVBS 1.0Vp-p, 75ohm
-10 ~ +50℃ ℃ (14℉ ~ 122℉)
γ=0.45
D/N ATR 700TVL VARI-FOCAL IR CAMERA
SPECIFICATIONS
AC100~240V
4 ~ 9mm
F1.4
69 ~ 30.7° °
51 ~ 23° °
86 ~ 38.5° °
Radiant Dis tance
Dimension
Weight
50M
Body:121.5mm(W) x 109mm(H) x 231mm(D), Bracket : 160mm(L)
1500g
Design and spec i f icat ions are subject to change wi thout not ice.
18
CMR7484X2.5N/P CMR7488X2.2N/P CMR7488X2.5N/P
8 ~ 20mm 4 ~ 9mm 8 ~ 20mm
33 ~ 14.5° °
25 ~ 11° °
41.5 ~ 18.2° °
69 ~ 30.7° °
51 ~ 23° °
86 ~ 38.5° °
33 ~ 14.5° °
25 ~ 11° °
41.5 ~ 18.2° °
12W
Model No.
Lens
Power Input Vol tage
System
Sync. Mode
Inf rared Cut F i l ter
Menu Contro l
P ick Up Element
Effect ive Pixe ls
Chip Size
Hor izonta l & Ver t ica l
Sync. Frequency
Scanning System
Resolut ion
Min imum I l luminat ion
Shut ter
Adapt ive Tone
Reproduct ion
S/N Rat io
Auto Gain Contro l
Whi te Balance
Noise Reduct ion
Pic ture Adjust
Pr ivacy Mask ing
Pr ivacy Mask ing Zone
OSD Language
Power Consumpt ion
Back L ight Compensat ion
Video Output
Operat ing Temperature
Gamma Character is t ic
IP Rat ing
Window
Inf rared
LEDBeam Spread
Peak Wavelength
Focal Length
I r is
Angle of v iew
H
Auto
Luminance
V
Manual
Contrast
D
CMR7484X3.6N/P
0.045Lux / F1.4
0.009Lux / F1.4
0Lux
1/60(1/50)S ~ 1/100,000S
LOW / MID / HIGH
1/60(1/50)S, 1/100(1/120)S, 1/250S, 1/500S, 1/1,000S, 1/2,000S, 1/4,000S, 1/10,000S
LOW / MIDLOW / MID / MIDHIGH / HIGH
NTSC or PAL
AC24V ( 10%)±
In terna l
Auto Selectab le , Automat ic Swi tch From Color Mode to Monochrome
OSD Contro l
1 /3" Exv iew HAD CCD Sensor
976(H) x 494(V) [NTSC]
976(H) x 582(V) [PAL]
5.58mm(H) x 4 .67mm(V)
15.734 KHz / 59.94Hz [NTSC]
15.625 KHz / 50Hz [PAL]
2:1 In ter lace
Color : 700TV L ines, Mono: 750TV L ines
More Then 50dB (AGC-OFF)
AUTO / MANUAL
ATW / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH LOCK
Y / C / Y/C / OFF
MIRROR / BRIGHTNESS / CONTRAST / SHARPNESS / HUE / GAIN
ON / OFF
8 Zones
ENGLISH/JAPANESE/GERMANS/FRENCH/RUSSIAN/PORTUGUESE/SPANISH/SIMPLY CHINESE
9.5W
BLC / HLC(High L ight Compensat ion) / OFF
IP66
ψ92 Heat Resistant Glass
850nm
30°
CVBS 1.0Vp-p, 75ohm
-10 ~ +50℃ ℃ (14℉ ~ 122℉)
γ=0.45
D/N ATR 700TVL VARI-FOCAL IR CAMERA
AC100~240V
3.3 ~ 12mm
F1.4
89.8 ~ 23.9° °
63.6 ~ 17.9° °
125.7 ~ 29.9° °
Radiant Dis tance
Dimension
Weight
50M
Body:121.5mm(W) x 109mm(H) x 231mm(D), Bracket : 160mm(L)
1500g
Design and spec i f icat ions are subject to change wi thout not ice.
66-CMR748CSE-219
CMR7484X2.4N/P CMR7488X3.6N/P CMR7488X2.4N/P
9 ~ 22mm
32.1 ~ 13.1° °
23.3 ~ 9.8° °
41.9 ~ 16.3° °
12W
3.3 ~ 12mm
89.8 ~ 23.9° °
63.6 ~ 17.9° °
125.7 ~ 29.9° °
9 ~ 22mm
32.1 ~ 13.1° °
23.3 ~ 9.8° °
41.9 ~ 16.3° °
Mono
Color
IR On
D/N ATR 700TVL VARI-FOCAL IR CAMERACMR7484X/7488X2.2 N/P & CMR7484X/7488X2.5 N/P & CMR7484X/7488X3.6 N/P
CMR7484X/7488X2.4 N/P
MERIT LILIN ENT. CO., LTDhttp://www.meritlilin.com 66-CMR748CSE
INSTRUCTION MANUAL