DISTRIBUTORS CATALOGFebruary 2016

Innovative Lock and Door ProductsFrom the makers of the Hinge Doctor ®

MEGA SCREWDRIVER

#MS1 $90.00 / Dealer $135.00

The 24 inch MEGA Screwdriver / Impact Driver has the power to break rusty and corroded screws loose and remove them with

ease. Features a non-slip handle grip, impact slider and a quick change chuck that allows the use of any standard quick change bit.

GKL Products has been developing both residential and commercial products for the lock and security industry since 1972. At GKL Products, we have manufactured our products from the best materials available and only the highest quality craftsmanship has been put into our products. A purchase of a quality GKL Product is a choice for durability and value, which will pay off over time, every time. GKL Products P.O. Box 533 Herald, CA 95638 Tel: (888) 446-4337 Fax: (209) 748-2405 Email: sales@gklproducts.com

GKL PRODUCTS“INVENTIVE IDEAS THAT WORK”

1

2

A No.12 Phillips under cut head with a No.14 oversized body. Replace stripped out hinge and strike plate screws in wood doors and frames.

Self-drilling, self-taping No.14 screws with No.12 Phillips undercut flat head. Replace stripped out hinge, strike plate and door closer screws in steel doors and frames.

COMMERCIAL 12/14 WOOD COMMERCIAL 12/14 METAL

HINGE SCREWS

Bright Brass

Satin

Brass

Satin Nickel

Antique

Brass

Oil RubbedBronze

( 50Pkg ) #HSP50WSBBR

(100Pkg) #HSP100WSBBR

( 50Pkg ) #HSP50WSSBR

(100Pkg) #HSP100WSSBR

( 50Pkg ) #HSP50WSSNR

(100Pkg) #HSP100WSSNR

( 50Pkg ) #HSP50WSABR

(100Pkg) #HSP100WSABR

( 50Pkg ) #HSP50WSOBR

(100Pkg) #HSP100WSOBR

Nickel Plated

Black Oxide

Yellow

Zinc

( 50Pkg ) #HSP50W

(100Pkg) #HSP100W

( 50Pkg ) #HSP50WB

(100Pkg) #HSP100WB

( 50Pkg ) #HSP50WYZ

(100Pkg) #HSP100WYZ

Nickel Plated

Black Oxide

( 50Pkg ) #HSP50M

(100Pkg) #HSP100M

( 50Pkg ) #HSP50MB

(100Pkg) #HSP100MB

(50Pkg) $12.50 / Dealer $30.00 (100 Pkg) $25.00 / Dealer $50.00

RESIDENTIAL 9/11 WOOD

A No.9 Phillips under cut head with a No.11 oversized body. Replace stripped out hinge and strike plate screws in wood doors and frames. Available in five different color choices

(50Pkg) $12.50 / Dealer $30.00 (100 Pkg) $25.00 / Dealer $50.00

(50Pkg) $12.50 / Dealer $30.00 (100 Pkg) $25.00 / Dealer $50.00

“SPECIAL HINGE SCREWS FOR STRIPPED OUT FRAMES”

Fits residential interior and exterior hinges

Residential interior hinges

Prison & spring hinges

#HA4D

Ball bearing hinges

#HA3D

#HA2 (The Hulk)#HA2AD #HA2BD

Commercial butt hinges

#HA1D

The Hinge Doctor® is the time saving, hinge restoration tool you have been looking for. Sagging doors are repaired in seconds with the turn of a wrench! Hinge Doctors® are available in handy kits or individually.

No 9,109,385BNo 9,109,385THE HINGE DOCTOR®

“REPAIR SAGGING DOORS IN 15 SECONDS”

Hinge Doctor®

Video

1-4 5-10 11-20 21-30 31-49 50-99 100+

$50 $40 $39 $28 $26 $24 $22

1-4 5-10 11-20 21-30 31-49 50-99 100+

$56 $50 $42 $31 $30 $28 $24

1-4 5-10 11-20 21-30 31-49 50-99 100+

$99 $77 $66 $62 $55 $50 $44

1-4 5-10 11-20 21-30 31-49 50-99 100+

$50 $40 $39 $28 $26 $24 $22

1-4 5-10 11-20 21-30 31-49 50-99 100+

$50 $40 $39 $28 $26 $24 $22

Residential exterior hinges

1-4 5-10 11-20 21-30 31-49 50-99 100+

$70 $63 $55 $43 $41 $37 $33

3

4

1-4 5-10 11-20 21-30 31-49 50-99 100+

$163 $146 $127 $95 $91 $83 $74

For commercial, institutional and residential applications. Includes all three commercial Hinge Doctor® sizes along with the HA2 for

residential applications.

For commercial and residential applications. Includes the HA1D and HA3D along with the

HA2 for residential applications.

For commercial and institutional applications. Includes all three commercial

Hinge Doctor® sizes.

#HA 134D KIT

#HA 1-3D KIT#HA-SET 1-4D

1-4 5-10 11-20 21-30 31-49 50-99 100+

$252 $217 $186 $151 $141 $128 $113

For residential wood doors and Timely® doors & frames. Includes all three residential

Hinge Doctor® sizes.

#HA2X3D KIT

x

x

H A 1-3D Kit

ww w.h in g ed o ct or . com8 8 8- 4 4 6- 4 33 7

The Hinge Do ctor

HA 1 34D Kit

w ww .h in ge d o cto r .c om8 88 - 44 6 - 43 3 7

The H ing e Doc to r

HA -SET 1-4D

w ww .h in g ed o ct or .c om8 88 - 4 46 - 43 3 7

The Hinge Doc tor

No 9 ,1 0 9 ,3 8 5

BNo 9 ,1 0 9 ,3 8 5

HA2X3 D

w ww. h ing e d oc to r .com88 8 - 44 6 -4 3 3 7

The H ing e Doc to r

1-4 5-10 11-20 21-30 31-49 50-99 100+

$184 $154 $129 $108 $100 $91 $81

1-4 5-10 11-20 21-30 31-49 50-99 100+

$163 $146 $127 $95 $91 $83 $74

#SK1 (Spanner Key)#B15 (Snap-In Bridge)

STOREFRONT DOOR STARTER KIT

#B1A (Clear) $39.00 / Dealer $65.00#SB1 $18.00 / Dealer $30.00

#B1D (Bronze) $39.00 / Dealer $65.00

STOREFRONT DOOR MODIFICATION KIT

All it takes is a twist of the special key to snap the bridge® into an aluminum framed, narrow stile storefront door. Done in about 10 seconds and ready to accept an MS lock deadbolt, dead latch or a faceplate.

STOREFRONT DOOR PRODUCTS“REPAIR OR MODIFY STOREFRONT DOORS WITH A TWIST”

For lock installation on storefront doors when installing new MS locks or replacing stripped out MS lock mounting screws with GKL Bridges®. Includes a spanner key, 4 snap-in Bridges®, screws and shims. (2 optional screws are included for each Bridge® for additional stability and holding power if needed)

For faceplate installation on storefront doors when fitting with a panic bar or exit device. Include 3 snap-in Bridges®, 2 blank faceplates (beveled and radius), screws, shims to adjust faceplate height, 1 ADD2 hole filler disc kit and brackets to convert the ADD2 disc kit to the ADD1 disc kit.

Use this pocket-sized tool to install the Bridge® or any hole filler discs. $7.00 / Dealer $10.00

A quick twist with the Spanner Key and it’s in place and ready to accept a lock or faceplate. $3.30 / Dealer $5.50

Bridge® Installation

Video

5

6

DISC WITH THREADED RODDISC WITH BRACKETS

LARGE DISC WITH THREADED ROD

FACEPLATES

LARGE DISC WITH BRACKETS

(Radius/Round)

(Flat)

(Beveled)

Simply screw the two two discs onto the threaded rod. Discs are 1 5/8” in diameter. Includes two discs and one threaded rod.

#LDD1A (Clear) $23.00 / Dealer $45.00

#FPRA

#FPFA

#FPBA

(Radius/Round)

(Flat)

(Beveled)

#FPRD

#FPFD

#FPBD

#LDD1D (Bronze) $23.00 / Dealer $45.00

Metal discs are 2 5/8” in diameter. Includes two discs and one threaded rod.

#LDD2A (Clear) $23.00 / Dealer $45.00

#LDD2D (Bronze) $23.00 / Dealer $45.00

Custom blank faceplates cover the cavity left by a lock removal when fitting the door with a panic bar or exit device. $2.75 / Dealer $4.50

Metal discs are 2 5/8” in diameter. Includes two discs, two brackets and two screws.

#ADD1A (Clear) $15.00 / Dealer $25.00

#ADD1D (Bronze) $15.00 / Dealer $25.00

#ADD2A (Clear) $15.00 / Dealer $25.00

#ADD2D (Bronze) $15.00 / Dealer $25.00

Slip the bracket into the hole and tighten the disc with the handy SK1 spanner key. Discs are 1 5/8” in diameter. Includes two discs, two brackets and two screws.

MST

MSCA

MSCD

THE GRIMESTOPPER

#GS-SPCR KIT $14.95 / Dealer $34.95

#GS-C/L $28.00 / Dealer $47.00

#GS-MR $28.00 / Dealer $47.00

#GS-LDB $28.00 / Dealer $47.00

The GS lock protector prevents moisture and dirt from entering the key way. Euro styles available for special order.

The GS-SPCR KIT includes two spacers and is for use with long mortise and rim cylinders.

#MSCD (Dark Bronze) $15.00 / Dealer $27.00

#MST (Template) $15.00 / Dealer $27.00

#MSCA (Clear) $15.00 / Dealer $27.00

These sturdy painted aluminum covers are used to provide mail slot security. Installation is simple and assured. Each mail slot cover comes with a convenient paper template to insure a proper fit. Metal templates are also available.

MAIL SLOT COVERS

#HS1 $39.00 / Dealer $78.00

OVERBORING JIG

The Hole Saw Alignment Guide enables you to re-bore an existing 1.5” diameter hole and turn it into a 2-1/8” diameter (or larger) hole without the use of plywood, “C” clamps, measuring centers or drill fixtures. Hole saw not included.

LDB C/L MR

SPCR KIT

HERCULOCK EMERGENCY DOOR LOCK

#HL1 $65.00 / Dealer $99.00

Easily secures Herculite doors. This emergency door lock installs in minutes for late night door lock-up. A quick fix for failed Herculite door locks.

MORE INNOVATIVE PRODUCTS“DESIGNED TO SAVE YOU TIME AND MONEY”

7

8

#MGF2 $13.00 / Dealer $20.00#MGF1 $13.00 / Dealer $20.00

#DL2 $95.00 / Dealer $150.00

#UH1AX628 (Clear)$29.00 / Dealer $49.00

#UH1DX313 (Bronze)$29.00 / Dealer $49.00

MAGNETIC FINGER MAGNETIC FINGER

#MGF3 (Call for Pricing)

THE MAGNETIC FINGER GLOVE

The MGF1 features a powerful magnet in the tip which allows you to hold and retrieve small metal objects with precise control.

Save your back and install doors in a snap with our Door Lifter. Place the Door Lifter beneath the door and easily lift the door into position by simply stepping on the lifter handle. Never leave the shop without it.

The MGF3 is a lightweight glove designed for the user who prefers the feel of a slightly thinner glove that provides maximum dexterity.

DOOR LIFTER 2

UNIVERSAL DOOR HANDLE

The MGF2 places the metal object on the tip of the finger for use in tight spots that require the object to go directly forward.

GKLproducts.com

GKL Products P.O. Box 533 Herald, CA 95638 Tel: (888) 446-4337 Fax: (209) 748-2405 Email: sales@gklproducts.com