Digital Multifunctional Industrial Intercom Systems · 2019. 5. 22. · Industrial intercom and PA/GA communication systems from INDUSTRONIC are modu-lar. Beside the standard intercom

Digital Multifunctional IndustrialIntercom Systems

About Company

Digital Communication and Public Address System

Digital Desktop Intercom Stations

Digital Outdoor Intercom Stations

IP Intercom Stations

Built-In Intercom Stations

IP Desktop Intercom Stations

DVE power amplifiers

Radio Base Stations and Crane Radio Stations

Central exchange unit interconnection

Accessories

3

4

10

16

22

30

34

40

46

50

52

Gesellschaft industrieller Technologien mbH is a solution provider that develops and implements industrial intercom and security systems in Europe and Asia. Our reliable solutions are based on our own developments and the equipment of leading global manufacturers.

3

INDUSTRONIC products features: ▪ Modularity; ▪ Wide range of specific-purpose equipment; ▪ Supported integration with third-party systems; ▪ Reliable functioning under severe climatic and operational conditions; ▪ Compliance with the strictest European regulations; ▪ Reliability and quality proven by numerous successful projects and brilliant reputation.

Gas Industry

Metal Industry

Oil Industry

Energy Sector

Chemical Industry

Transport

Industries:

INDUSTRONIC is the brand of the German company INDUSTRONIC Industrie-Electronic GmbH & Co. KG tracing its history since 1964. With its headquarters located in the city of Wertheim, Germany, the company possesses a well-developed global partnership network.

Industrial intercom and PA/GA communication systems from INDUSTRONIC are modu-lar. Beside the standard intercom and PA/GA functionality, the system allows digital data transfer and monitoring signals.

Suitable for use under virtually any conditions, solutions based on INDUSTRONIC equip-ment are applied in a multitude of industrial sectors. INDUSTRONIC systems reliably operate under conditions of dust pollution, contamination, as well as hazardous conditions where explosive gases and substances may occur in the atmosphere; and extremely high/low temperatures.

4

Industrial communication and public address system INTRON-D ensures reliable communication at production facilities — both in the course of standard operation and in case of emergency occurring, when the system enables transfer of information, operational instructions, and alert messages to the staff. This unit has been designed as an open modular system and it is generally used as a two-way communication and loudspeaker alarm system. It can be deployed for transmitting digital data or monitoring signals as well. The cornerstone element of the unit is the digital communication system that receives, processes, and transmits data.

DIGITAL COMMUNICATIONAND PUBLIC ADDRESS SYSTEM

5

Digital Communication and Public Address System6 7

Main Features:

Advantages:

Maximum number of intercom stationsper one unit

Maximum distance between intercom sta-tion and digital

Mains voltage range

Internal operating voltage range

Bandwidth of voice transmission, Hz

Device Specifications

INTRON-D

192

4

from 110 VAC to 120 VACor from 220 VAC to 240 VAC

42 — 72

150 — 7200

▪ Unified digital platform for public address and general alarm system (PA/GA) to annunciate alarms and warnings to moving objects, as well as for loudspeaker communication;

▪ Redundancy option for the processor and other system elements for higher reliability;

▪ Modular design of digital communication system, ready for expansion;

▪ Uniting digital communication platforms into one network (E1, DSL, SMF/MMF);

▪ Single-copper-pair connection of subscribers;

▪ Noise free speech communication;

▪ Centralized phantom-circuit power supply to digital subscribers;

▪ Online real-time switch, digital amplifier and subscriber control;

▪ Integration with third-party systems;

▪ User-friendly graphical administration and monitoring interface;

▪ Full set of certificates and permitting documents;

▪ Remote administration via Ethernet;

▪ Subscribers switching.

▪ Direct two-way public address;

▪ Individual, group, and collective calls;

▪ Support of simplex/duplex modes;

▪ Visual/acoustic indication of call, call storage and busy signaling;

▪ Single dial switch plan;

▪ Call recording;

▪ Manual/automatic message recording and re-playing;

▪ Priority levels;

▪ Alarm signal and message broadcasting;

▪ Integration with PBX, analog equipment (PGS, Orekh, Beryozka), security and fire alarm, civil defense and emergency system (P-166), conventional radio communication systems, Tetra standard systems, modBus process control systems, and access control systems;

▪ Acoustic/visual alarm monitoring;

▪ System failure messaging via e-mail.

INTRON-D: Functionality, security, and reliabilityBASS TREBLE VOLUME

BASS TREBLE VOLUME BASS TREBLE VOLUME

Digital Communication and Public Address System8 9

Advantages: ▪ Connection to IP, digital and analog intercom stations;

▪ SIP protocols to provide integration with external intercom systems;

▪ Networking up to 250 digital exchange units via Ethernet, optic fiber, copper E1/DLS;

▪ Up to 200 priority levels, 65,000 freely programmable addresses, 1,000 selectable group calls;

▪ Single intercom and PA/GA system;

▪ Flexible networking via Ethernet and system interfaces;

▪ Subscribers switching;

▪ Continuous performance monitoring of system elements and terminal devices;

▪ Centralized Control;

▪ Modularity and expandability;

▪ Integration with third-party communication systems.

INTRON-D plus system was designed grounding on over 40 years ofexperience in developing and manufacturing the most advanced industrialintercom systems. Meeting ever-growing customer and market demands,INTRON-D plus comprises reliability and functionality of the knownINTRON-D system, in the meantime supporting network technology thatenables it to (1) flexibly integrate into any Customer’s infrastructure and(2) deliver on any tasks related to two-way PA/GA, loudspeaking andemergency alert.

INTRON-D plus

Example of designing an integrated system based on INTRON-D plus

BASS TREBLE VOLUME


IP

Ethernet Switch

BASS TREBLE VOLUME


BASS T REBLE VOLUME

BASS T REBLE VOLUME BASS TREBLE VOLUME

POWER CHANNEL A / 250W

FAULT

ON

CLIP

SIGNAL

CHANNEL A / 250W

FAULT

ON

CLIP

SIGNAL

Remote Paging Network

Digital Telephones Analog TelephonesDECT (Digital European

Branch ExchangePABX Input/Output Unit

Paging Network (outdoor loudspeakers)

WORKSHOP NO.1 WORKSHOP NO.1LOCAL CONTROL BOARDLOCAL CONTROL BOARD

Mobile Radio

Fire Alarm Visual alarm CCTV Access Control

10

Digital desktop intercom stations are designed for use atcontrol rooms and centers, measuring stations, commandposts, etc.

DIGITAL DESKTOP INTERCOMSTATIONS

11

12

DTM series

DT series

13

Dimensions:

DЕ Series

DTM series

Additional Features (model-specific):

Supply voltage range, VDC

Quiescent current consumption / max loadcurrent consumption, mA

Speaker capacity, W / Resistance, Ohm

Voice transmission frequency range, Hz

Operating temperature range, ºС

Protection class

Master unit weight, kg

Desktop intercom station withprogrammable keys/switches

Desktop intercom station withprogrammable keys/switches



Output capacity, W


Type

Auxiliary AmplifierSpecifications

DT Series

DT Series

DTM series

DTM series

42 — 72

42 — 72

50 / 140

20 / 850

45 / 1000

4 / 85 / 8

25

300 — 7000 150 — 7200

0 to +50 (32 °F to 122 °F)

IP 40 IP 42

1,3 1,1

▪ Auxiliary amplifier to enable the use of an external loudspeaker;

▪ Wireless headset or handset;

▪ Flash beacon connection.

DTM series

DT Series

Advantages:

▪ Extendible with keys and/or toggle switches;

▪ Up to 7 keypads with 16 keys each (112 subscribers) or 10 switches (70 subscribers).

▪ Display;

▪ Digital input with extended audio range (up to 7 kHz);

▪ Keypads with 15 keys each (15 to 60 keys);

▪ 4 function keys for menu control.

DT series / DTM seriesDigital Desktop Intercom Stations

14

ID Intouch (DIT)

DE Series

15

Dimensions:

DE Series

Additional Features (model-specific):






Protection class


Digital built-in modularintercom station

PC-based intercom station,compatible with INTRON-D(plus),

ID Intouch software, headset/handset,loudspeaker



Output capacity, W


Type


DE Series

DE Series

DE Series

ID Intouch (DIT)

ID Intouch (DIT)

42 — 72

42 — 72

50 / 100

20 / 850

10 / 100

5 / 8 depends onconnected

loudspeaker

25

300 — 7000 300 — 3400

0 to +50 (32 °F to 122 °F)

IP 40

0,8


▪ Wireless headset or handset;

▪ Flash beacon connection.

DE Series

ID Intouch (DIT)

Advantages:

▪ Mouse/touch screen control;

▪ Subscribers grouping;

▪ Connection of up to 320 subscribers;

▪ Option to modify configuration and user profile;

▪ Emergency call confirmation request.

▪ Extendible with keys and/or toggle switches;

▪ Up to 9 keypads with 16 keys each (144 subscribers) or 10 switches (90 subscribers);

▪ Loudspeaker and keypad modules can be attached with special mounting clips.

DE Series / ID Intouch (DIT)Digital Desktop Intercom Stations

16

DIGITAL OUTDOOR INTERCOMSTATIONS

17

Digital weatherproof outdoor intercom stations of the newDA series are part of the INTRON-D plus PA/GA systemfrom INDUSTRONIC. The design allows for clear and reliablecommunication at any time, whether you operate the intercomstation in extreme cold or heat or in noisy, dirty or dustyenvironments. The upgraded family comes with the DAE versionallowing for convenient use of accessories such as hand-heldmicrophones, handsets, or wire industrial headsets.

18 19

DA x15 Series

DA x05 Series

Dimensions:

Additional Features:





Max. sound pressure level(distance 30 cm (4.7”), dB


Protection class

Cable gland size


weatherproof



Output capacity, W


Type


DA x05 Series DA x15 Series

42 — 72

42 — 72

20 / 100

20 / 850

15 / 8

25

115

300 — 3400 / 300 — 7000

-40 to +70 (-40 ºF to +158 ºF)

IP 66

1 x M25 + 2 x M20

5

▪ Optional 25-W auxiliary amplifier installed in the intercom housing enables the use of an external loudspeaker;

▪ Connection of flash beacon;

▪ Hand-held microphone, handset or wire headset of industrial design with DAE modification;

▪ Keypads can be expanded with 6/12 additional direct call keypads;

▪ Acoustic hood for noise insulation.

DA x05 Series

DA x15 Series

Advantages:

▪ Dial keypad to connect to any intercom station;

▪ Momentary rocker switches for direct calls;

▪ Increased device capacity via additional keypads.

▪ Up to 3 momentary rocker switches;

▪ Expandable programmable keys via additional keypads.

DA x05 Series / DA x15 SeriesDigital Outdoor Intercom Stations

20

Digital Outdoor Intercom StationsDX 005 Series / DX 015 Series

DX 015 Series

DX 005 Series

21


▪ Installation of an optional 25-W auxiliary amplifier;

▪ Connection of external horn loudspeaker;

▪ Connection of flash beacon;

▪ Convenient use of external accessories with modification of DXE type;

▪ Additional acoustic hoods for noise insulation.

DX 005 Series

DX 015 Series

Advantages:

▪ Dial keypad to connect to any intercom station;

▪ Momentary rocker switches for direct calls;

▪ All ignitable electronics is integrated in a separate module, which is installed in an explosion-proof sealed compartment.

▪ Up to 3 momentary rocker switches;

▪ All ignitable electronics is integrated in a separate module, which is installed in an explosion-proof sealed compartment.

Dimensions:





Max. sound pressure level(distance 30 cm (4.7”), dB


Protection class

Cable gland size


Weather- and explosion-proof



Output capacity, W


Type


DX 005 Series DX 015 Series

42 — 72

42 — 72

20 / 100

60 / 850

15 / 8

25

106

300 — 3400

-40 to +70 (-40 ºF to +158 ºF)

IP 66

1 x M25 + 2 x M20

7

22

IP INTERCOM STATIONS

23

IP intercom station is a component of the PA/GA system fromINDUSTRONIC; optically adapted for the use at gateways,entrance areas, elevators, clean rooms, office buildings, etc. IPintercom stations are available with 3 modules (microphone,loudspeaker and key module with 1 or 2 programmable keys)and are suited for installation in both surface and built-inhousings. Their special design makes them resistant to dirt,dust, and vandalism.

24

IP Intercom StationsNSO 001

25

Main Parameters:Power supply

External power supply

Standard power consumption, W

Loudspeaker, W / Ohm

Service interface

Ambient temperature, °С

Humidity, %

Protection class

EMC

Height x width x depth, mm

Weight, kg

Power supply through Ethernet (PoE)recommended

IPv4 network

Support of UDP, SCTP, RTP and RTCPprotocols

Quality of Service (QoS) - ideal latency value< 20 ms (max. 50 ms), jitter: max. 10 ms


Network Requirements

15-W PoE according to IEEE 802.3af

42 VDC to 57 VDC, 0.1 A at 48 V

3

Mini USB

7 / 8

-20 to +50 (-4 °F to 122 °F)

max. 95

IP 54

IEC/EN 61000-6-2, IEC/EN 61000-6-4

333 х 136 х 76

4,5

▪ Network connection via Ethernet;

▪ Stainless-steel modular housing;

▪ Up to 2 freely programmable keys;

▪ Adjustable microphone sensitivity and speaker volume;

▪ Monitoring of microphone function.

Advantages:

▪ RNVCB – electronics module;

▪ Modules: Microphone, loudspeaker, 1 or 2 freelyprogrammable keys;

▪ Mounting post (optional).

26

IP Intercom StationsNRO 001

27

Main Parameters:

Power supply


Amplifier capacity, W

Frequency range

Loudspeaker

Control line output


Relative humidity (non-condensing)

Protection class

EMC test (CE mark)

Power supply through Ethernet (PoE)recommended

IPv4 network

Support of UDP, SCTP, RTP and RTCPprotocols

Quality of Service (QoS) - ideal latency value< 20 ms (max. 50 ms), jitter: max. 10 ms


Network Requirements

PoE according to IEEE 802.3af, 15 W orexternal power supply (42 VDC to 57 VDC,

0.1 A at 48 V)

3

0,75

15 W / 8 Ohm

200-16000 Hz +/- 3dB

max. 350 mA, using external power supplyunit (42 VDC to 57 VDC)

-20 to +55 (-4 °F to 131 °F)

max. 95

IP 66

IEC/EN 61000-6-2, IEC/EN 61000-6-4

▪ Modular and maintenance-friendly design;

▪ Protection class IP66;

▪ 1 to 3 keypads for direct calls;

▪ Configurable and programmable by user control elements;

▪ Momentary rocker switches;

▪ Visual call or busy signaling;

▪ Microphone with electronic noise compensation and dynamic compression;

▪ Speaker volume and microphone sensitivity can be adjusted;

▪ Dry contacts;


▪ PoE or external power supply.

Advantages:

Interfaces:

▪ Glass-fiber reinforced polyester housing;

▪ 25-W auxiliary amplifier, external power supply required (e. g. in a separate box).

▪ 1 x RJ45 port 10/100 Mbps (LAN + PoE);

▪ Screw terminals for external power supply, additional loudspeaker or line output control with 2.5 mm² rated cross section;

▪ 1 x Mini USB service port.

Power supply

Quiescent current consumption, mA

Output power


External power supply 48 VDC(42 VDC to 57 VDC, 1 A at 48 V)

60

25 W / 400 Ohm

Dimensions:

28

IP Intercom StationsNRC 001

29

Dimensions:

Main Parameters:

Power supply

External power supply

Quiescent current consumption / maxcurrent consumption, mA

Amplifier output, W

Frequency range

Loudspeaker

Network interface, Mbps

Service interface


Humidity, %

Protection class

EMC

Height x width x depth

Weight, kg

Cable glands

Color


15-W PoE according to IEEE 802.3af

42 VDC to 57 VDC, 0.1 A at 48 V

60 / 270

0,75

200 Hz – 16 kHz

5 W / 8 Ohm

1 x RJ45 10/100

Mini USB

-10 to +50 (14 °F to 122 °F)

max. 95

IP 40

IEC/EN 61000-6-2, IEC/EN 61000-6-4

100 х 275 х 150

2,8

1 x M16 (up to 3 x M16 possible)

Red (RAL 3000)

▪ Robust and reliable design for indoor use;

▪ Modularity;

▪ 3 dry contacts;


▪ Busy or call storage signaling;

▪ Integrated web interface for configuration and service functions;

▪ Adjustable microphone sensitivity and speaker volume;

▪ Monitoring of microphone function.

Components and Accessories:

Network Requirements:

▪ Flame-retardant glass-fiber reinforced polyester housing;

▪ Robust ‘gooseneck’ microphone;

▪ Supplied with freely programmable keys or toggle switches;

▪ Key cover to protect the keys against accidental actuation (optional);

▪ Remote loudspeaker with 8 m cable away from the intercom station (optional).

▪ Power supply through Ethernet (PoE) recommended;

▪ IPv4 network;

▪ Support of UDP, SCTP, RTP and RTCP protocols;

▪ Quality of Service (QoS) - ideal latency value: < 20 ms (max. 50 ms), jitter: max. 10 ms;

▪ 10Base-T/100Base-TX Ethernet (IEEE 802.3), 100 Mbps recommended;

▪ 200 kBit/s basic bandwidth and 200 kBit/s per active audio channel.

30

BUILT-IN INTERCOM STATIONS

31

Versatile vandal-proof weatherproof intercom stations ofthe DS series are designed for mounting into various wallpanels or housings. Can be used as an emergency callpoint, elevator intercom stations, etc.

Built-In Intercom StationsDS Series

32 33

Main Parameters:


Advantages:

Power supply voltage rage, V

Quiescent current consumption / maxcurrent consumption, mA




Protection class



42 — 72

20 / 100

1 / 8

300 — 3400

-20 to +55 (-4 °F to 131 °F)

IP 54

4.5 kg or 9.9 lbs (3 modules);5 kg or 11 lbs (4 modules)

▪ Stainless steel housing;

▪ Noise-compensating microphone;

▪ Monitoring of microphone function;

▪ Speaker volume and microphone sensitivity can be adjusted;

▪ Dry contacts.

▪ Rainhood;

▪ Emergency call point design.

▪ Versatile built-in and surface-housing vandal-proof intercom stations;

▪ 3/4-module design;

▪ Microphone module;

▪ Loudspeaker module;

▪ Module with 1 to 4 keys for direct calls.

Dimensions:

34

IP DESKTOP INTERCOM STATIONS

35

IP desktop intercom stations of the 12 NIB 001 seriesare part of the INTRON-D plus PA/GA system fromINDUSTRONIC. These stations were designed for indooruse in control rooms, measuring stations, or commandposts. They have 12-key keyboards with displays and12 keys for direct calls with inscription labels and visualindication. A station can be easily integrated into theexisting plant network environments.

IP Desktop Intercom Station12 NIB 001 Series

36 37

Main Parameters:

Advantages:Power consumption, W

Power supply




Protection class




2,5

PoE or external power supply(42 VDC to 57 VDC, 0.1 A at 48 V)

5 / 8

200 – 16 000

-10 to +55 (14 °F to 131 °F)

IP 41

182 х 130 х 55 mm

0,8

▪ Dial calls to any subscriber;

▪ All direct-call keys have individual ID label;

▪ Call and busy signaling; multi-color signaling on keys for preset events;

▪ ‘Gooseneck’ microphone with electronic noise compensation and dynamic compression;

▪ Microphone sensitivity and speaker volume can be adjusted both locally and via web interface;

▪ Function keys for menu control;


▪ Audio bandwidth of up to 16 kHz.

▪ Metal-base plastic housing;

▪ ‘Gooseneck’ microphone 290 mm (11.4»);

▪ 12 direct-call keys, 4 function keys, display;

▪ Optional modification: wall-mounted intercom station with a built-in microphone.

Dimensions:

IP Desktop Intercom Station

Type

IP Desktop Intercom StationAP 701 series

38 39

Main Parameters:


Advantages:


Integrated amplifier capacity, W




Touch display, cm


Protection class




6

2 x 0,75

48

2 х 8 / 8

200 — 16 000

17.8 cm (7”) / 800 x 480 pixels

-10 to +50 (14 °F to 122 °F)

IP 41

80 mm x 267 mm x 242 mm

2,5

▪ PoE or external power supply;

▪ ‘Gooseneck’ microphone according to DIN EN 60849;


▪ Resistive color touch screen for activating functions responding to pressure.

▪ Can be modularly expanded by an external handset and up to 4 additional keypads — thus a total of 108 mechanical keys is possible;

▪ Up to 10 control layers (levels) with max. 200 display buttons;

▪ Multi-Color function indication;

▪ Audio bandwidth of up to 16 kHz.

▪ 7» Color touch display;

▪ 12 direct-call keys with integrated indication;

▪ 3 function keys;

▪ In case of the ‘gooseneck’ microphone failure, the conversation automatically switches to the integrated additional microphone;

▪ Two simultaneous operating amplifiers and speakers (for higher reliability).

▪ Height x width x depth80 mm x 90 mm x 242 mm

▪ Weight: 0.8 kg

▪ Height x width x depth100 mm x 90 mm x 242 mm

▪ Weight: 1 kg

IP Desktop Intercom Station

Type

1 APH 01 handset

24 APK 01 additional keypad

40

POWER AMPLIFIERS

41

Digital power amplifiers are designed for use in local PAsystems. Digital input and balanced analog input, lowheat radiation at high capacity — these factors enhancesystem reliability in emergency situations. The amplifieris connected to INTRON-D plus PA/GA as a digitalintercom station, which allows for 4-km distance from the central exchange unit. The amplifier provides integrated monitoring and automated redundancy functions.

DVE power amplifiers250 DVE 13 / 500 DVE 13

42 43

Main Parameters:


Advantages:

▪ Robust steel housing;

▪ Digital power adjustment;

▪ High efficiency (>80%, class D);

▪ Low quiescent power consumption;

▪ Long life;

▪ Transformer output winding switching for 70 V and 100 V;

▪ 48 VDC and 60 VDC emergency supply;

▪ Integrated monitoring of system functioning;

▪ Compliance with EN 60849 / VDE 0828;

▪ «Sound Systems for Emergency Alert».

▪ PA area switching;

▪ Monitoring of loudspeaker circuit functioning.

▪ Digital input with extended audio bandwidth (up to 7 kHz).

▪ Output capacity 500 W;

▪ Digital input with extended audio bandwidth (up to 7 kHz).

Dimensions:

500 DVE 13

500 DVE 13

250 DVE 13

250 DVE 13


250 DVE 13 500 DVE 13

Output capacity, W

Analog Frequency Range, Hz

Main power supply, VAC

Distortion factor, %

Signal-to-noise ratio, dB

Input LF signal level, V

Emergency power supply range, VDC

Quiescent power consumption, VA

Rated power, VA

Quiescent current consumption at 60 V, A

Current consumption at rated power, A


Weight, kg

250 500 (2 x 250)

200 — 15 000

230 (+ / -10)

<1

>80

0,4 — 2

42 — 72

6 10

315 620

0,06 0,1

5 10

-5 to +50 (23 °F to 122 °F)

10 12,5

Power Amplifiers of NPA TypeNPA ((controlled by INTRON-D plus over Ethernet)

44 45

Main Parameters:

Advantages:

▪ Connection to INTRON-D plus over Ethernet

▪ Modular design allows for a maximum output power of 600 W;

▪ Can process up to 4 independent input audio channels;

▪ Up to 8 selectively addressable loudspeaker lines (PA areas);

▪ N+1 redundancy principle;

▪ Integrated web interface;

▪ Navigation through the intuitive user interface implemented in the front panel.

▪ Output capacity 300 W / 600 W;

▪ Connection via Ethernet.


Output capacity, W

Frequency range, Hz

Operating power supply voltage, VAC

Emergency power supply voltage, VDC

Efficiency, %

Temperature range, °C


Weight, kg

300/600 (depending on type)

150 – 16 000

96 – 264

42 – 72

>80

-15 to +55 (5 °F to 131 °F)

132 mm x 430 mm x 330 m(19” housing – module)

12,5

Power amplifier of NPA type is controlled byINTRON-D plus over LAN and can control up to 8 selectively addressable loudspeaker areas.

Two amplifier slots provided in the NPA unit can beequipped with amplifier modules that are available in thefollowing versions: 2 x 150 W and 1 x 300 W, configuredin various combinations.

46

RADIO BASE STATIONSAND CRANE RADIO STATIONS

47

Establishing connection to hand-held/mobile radio stations, radiobase stations are designed as the interface between radio stationsand the INTRON-D (plus) PA/GA system. Radio base stations canbe mounted in the central cabinet or within 4 km from the centralexchange unit for the highest possible efficient coverage.Crane radio stations allow for flexible wireless connection betweenmobile objects at industrial areas. Crane radio communication canbe integrated into the existing plant network and combined withINDUSTRONIC intercom stations.

Radio Base Stations and Crane Radio StationsFK Series / 0FB Series

48 49

Main Parameters:

Main Parameters:



Advantages:

Advantages:

▪ Housing made of glass-fiber reinforced polyester;

▪ Two selectable frequency ranges (as required);

▪ Digital transmission power adjustment;

▪ Vandal-proof noise-compensating ‘gooseneck’ microphone;

▪ Individual key labeling;

▪ LED call and busy signaling;

▪ Adjustable speaker volume and microphone sensitivity.

▪ Aluminum housing;

▪ Two selectable frequency ranges (as required);

▪ Digital transmission power adjustment.


▪ Foot call / answering switch.

▪ Integration with third-party hand-held / mobile radio stations.

▪ Direct-call keys/switches;

▪ Up to 2 keypads with 16 keys each (32 subscribers) or 10 switches (20 subscribers);

▪ 5-tone selective calling Select-V.

▪ Can be mounted in the central cabinet or within 4 km away from the central exchange unit;

▪ One radio base station can connect up to 10 radio subscribers;

▪ 5-tone selective calling Select-V.

0FB Series

0FB Series

FK Series


FK Series 0FB Series

Power supply voltage rage, V

Transmitter output, AC version, W

Transmitter output, DC version, W


Antenna resistance, Ohm

Frequency range, MHz

Frequency grid, kHz


Protection class

Weight, kg

110 VAC to 230 VAC; 110 VAC to 230 VAC60 (DC)

1 to 25

1 to 25 — / —

— / — 1 / 8

50

146 VHF to 174 VHF; 440 UHF to 470 UHF

12,5 / 20 / 25

-20 to +55 (-4 °F to 131 °F)

IP 65

5

FK Series

Crane radio station

Radio base station

Type

FK Series

0FB Series

Central communication system50 51

Central exchange units can be interconnected with the use of 12 DXI seriesdigital exchange unit interfaces that are used for integrating two or more centralexchange units. In such case, central exchange units are connected via wire(E1 or DSL) or optic (SMF/MMF) lines. Star/ring network supported.

When using INTRON-D plus, central exchange units can be interconnected viathe IP network; with that, direct interconnection of units via 12 DXI can be usedas redundant for emergency purposes.

Interconnected central exchange units form a single system that can becontrolled and/or maintained by one duty officer of the intercom center.

Interconnecting central exchange units within INTRON-D plus

Ethernet / IPBASS TREBLE VOLUME


BASS TREBLE VOLUME


BASS TREBLE VOLUME


REMOTE OBJECTS

WORKSHOP NO.3

WORKSHOP NO.3

FIBER-OPTIC COMMUNICATION LINE, DSL, E1FIBER-OPTIC COMMUNICATION LINE, DSL, E1

FIBER-OPTIC COMMUNICATION LINE, DSL, E1 FIBER-OPTIC COMMUNICATION LINE, DSL, E1

WORKSHOP NO.1

FIBER-OPTIC COMMUNICATION

LINE, DSL, E1

Accessories52

Wireless Headset

Wire Headset

Push-To-Talk Handset

Handset

INDUSTRONIC products can be upgraded with accessories designed for optimizing technologyprocesses and higher convenience in operating major equipment.

Desktop intercom station connection

Weatherproof outdoor intercom stations connection

Desktop intercom station connection

Intercom stations connection

Comprises base station (connects to the desktop intercom station) and headset.Several desktop intercom stations with headsets can easily operate in one roomwithout interfering with each other.

Used in noisy facilities.

Supports simplex/duplex.

Designed for duplex operation.

53

Wire Microphone

Acoustic Hood

Versatile Posts

Additional Keypads for Intercom Stations

Foot switch (hands free mode)

Acoustic hood for explosion-hazardous areas

Intercom stations connection

Integrated into weatherproof outdoor intercom stations (recommended)

Installation of weather-proof and explosion-proof outdoor intercom stations

Weatherproof outdoor intercom stations connection

Crane or wall-mounted weatherproof intercom stations connection

Integrated into weather-and explosion-proof intercom stations (recommended)

Used to broadcast information by staff standing/sitting within up to several metersfrom the intercom station.

Dust/damp/noise proofing.

Steel housing ensures high reliability of installation. Cable entry through post base.

Keypad with 6/12 programmable direct-call keys.

Enables the crane operator to respond to the calls (recently received from a subscriber).

Dust/damp/noise proofing; antistatic housing; designed for operation in harshenvironments.

5554

Hauptstraße 10, 14979 Großbeeren, DeutschlandTel.: +49 (0) 33 701 26330

E-Mail: [email protected]

Documents

Digital Multifunctional Industrial Intercom Systems · 2019. 5. 22. · Industrial intercom and PA/GA communication systems from INDUSTRONIC are modu-lar. Beside the standard intercom