Embed Size (px)
Citation preview
� Modification of Common Rail systems
� Different modification levels available
� All hydraulic parts available
The geometry and characteristics of Diesel enginecomponents are more dependent upon the applica-tion than those for gasoline engines. A single in-jector design will not fit all Diesel engines due tovarying mechanical and nozzle geometry require-ments. In addition, the injection system can varyfrom year to year even within the same make of car.Bosch Motorsport uses the same Common Rail tech-nology for racing that was developed for productionvehicle applications. This includes both solenoid(magnetic) technology and the latest cutting-edgepiezo technology.Bosch Motorsport can offer a wide variety of modi-fications to fit the system to your specifications.These modifications include:
• Definition of suitable base components from other (or larger)engine applications.
• Adaptation of components for mating, fit and orientation to suitthe selected application.
• Flow enhancement of injectors and rails.• Injector nozzle adaptation (flow rate, number of holes, spray
cone angle etc.).
Technical Specifications
Common RailPumps
CP1H, CP3, CP4
Rails Max. 6 cyl./bankPressure Sensors RDS Max. 2,400 barInjectors CRI 2 (Solenoid),
CRI 3 (Piezo)Pressure ControlValves
DRV Max. 2,400 bar
Installation Notes
When contacting us for more information on ourDiesel components, please have the following in-formation ready so that we may best determinecomponents required for your application:• The base engine / the car where this engine originally is installed• Model year and type of car / engine• The base output level and the desired output level for the engine• If it is originally equipped with Bosch components: the part
numbers of the Bosch components• Alternatively the car / engine manufacturer part number of the
original injection system.
Bosch Motorsport | Diesel System Components
Diesel System Components
Dimensions
Bosch Motorsport | Diesel System Components 2 | 2
Represented by:
Europe:Bosch Engineering GmbHMotorsportRobert-Bosch-Allee 174232 AbstattGermanyTel.: +49 7062 911 9101Fax: +49 7062 911 [email protected]
North America:Bosch Engineering North AmericaMotorsport38000 Hills Tech DriveFarmington Hills, MI 48331-3417United States of AmericaTel.: +1 248 876 2977Fax: +1 248 876 [email protected]
Asia-Pacific:Bosch Engineering Japan K.K.Motorsport18F Queen’s Tower C, 2-3-5 MinatoMirai Nishi-ku, Yokohama-shiKanagawa 220-6218JapanTel.: +81 45 650 5610Fax: +81 45 650 5611www.bosch-motorsport.jp
Australia, New Zealand and SouthAfrica:Robert Bosch Pty. LtdMotorsport1555 Centre RoadClayton, Victoria, 3168AustraliaTel.: +61 (3) 9541 [email protected]
© Bosch Engineering GmbH 2020 | Data subject to change without notice| , V, 12. Feb 2020
