Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
SUBSOILER RANGEThree different jobs in one pass
DIABLO ARTIGLIO
ATTILA PINOCCHIO
MASCHIO - SUBSOILERS
The Maschio sub-soilers let you finish three different jobs in one-pass, decreasing your fuel costs: soil shattering (up to 28’’ depth), mulching and levelling. The heavy-duty frame features a simple,
robust design with few wear parts and grease points to drastically reducethe maintenance time and cost. The large range of working width range available (from 4.3’ to 23’) and the high working speed
(4-6 mph) ensure high productivity; which means a fast return on your investment!
3 DIFFERENT JOBS IN 1 PASSA COMPLETE RANGE OF SUBSOILERS● Compaction layer shattering
Maschio sub-soilers break up compaction layers, promote aeration, limit runoff and improve water infiltration which helps the soil retain moisture. The shank inclination has been designed to allow for better penetration, even in the toughest soil, while the high frame clearance and the well-spaced shanks guarantee perfect residue flow.
● Residues sizing and incorporation The rear double spike or disc rollers size residue into planter-manageable pieces, dislodge root balls and get the straw in contact with the soil for faster decomposition.
● Seed bed refinement Maschio sub-soilers leave a smooth, level surface for one follow-up pass
in the spring. The double counter-rotating spike or disc roller systems accomplish final clod sizing, soil firming and levelling. They are excellent tool for continuous corn-on-corn cropping system.
“The rear roller mixes top soil well with residues. Even in wet conditions, the machine works really well. “
Herrn Cornell, Frankfurt DE
If your goal is to till up to 22”, incorporate residues on top soil and leave the soil level enough for a single pass tool in the spring, DIABLO is what you need!
Denisov Mikhail, Volzhskiy RU
2 3
SUBSOILERS
HEAVY-DUTY SHANKS
Hydro-pneumatic system Auto-reset circuit with double nitrogen accumulator and safety
valve prevents frame damages and reduces downtime resulting from shear bolt replacement. Once the obstacle is overcome, the
system brings the shank back to its working position. The nitrogen accumulator capacities are 2 gal for the hydro-pneumatic models
with 5 shanks and 4,5 gal for the versions with 7 and 9 shanks.
Shear boltAll sub-soilers have a passive safety device which flips
back shank if maximum admissible load is exceeded. In particular 8.8 or 10.9 (only for hydro-pneumatic models)
strength class shear bolts able to resist to a load up to 7800 lb protect Maschio sub-soiler shanks.
Progressive inclination1,2” 1,4” or 1,6” thick shanks are characterized by an increasing inclination from the tip to the top (from 20° to 60°). It improves soil penetration reducing HP requirements. Clod breaking bladeCentral bolt-on blade improves clod breaking, improving compaction layer shattering.
Adjustable side blades5,5” bolt-on side tips horizontally shatter the soil. The tines overlap between the front and rear gangs guarantees superior tilling over the full working width. Side blades position can be adjusted, depending on hard-pan depth.
Quick coupling reversible tipFront tip, 3” large, shatters compact soil layers and improves shank penetration. It can be easily upset just removing two bolts when one side is wore out. The tungsten coating makes it even more lasting.
4 5
SUBSOILERS
INTENSE MIX AND LEVELLINGTwo gangs of notched discs with ø of 24’’ and thickness of 1/3’’ ensure optimal soil straw mixing even on very high density residue. The perfect overlap between front and rear gangs guarantees an extremely consistent tillage all across the working width.
SUB-CONSOLIDATIONRear disc gang down-pressure is equally
distribuited over total working width at 2-3” depth. This sub-compaction effect keeps ground
moisture at the best for an optimal rooting and increases soil bearing capacity; this means that you
can seed with the bigger planters even on wet soil. Moreover, the top soil is well refined allowing a
perfect seed emeregence.
6 7
SUBSOILERS
Heavy-duty frameDIABLO frame is extremely sturdy! The folding version is equipped with 6 cylinders, 3 per side, that ensure a constant working depth preventing frame oscillations, torsions and then damages. The ground clearance is 35” while the gangs are 49” spaced.
Great maneuvrability and easy transportCat. 4 draw bar with Ø of 2” towing eye (available also cat. 5 and 3 with towing eyes Ø of 2” and 3”, respectively) and large transport tyres (550/60-22.5) ensure an excellent manoeuvrability during transport on road and when turning at field heads.
Working depth adjustmentWorking depth is set hydraulically by the rear disc rollers and mechanically by the double front wheels (10.0/75-15.3).
No-stop tilling with no-maintenance1.4” thick shanks with tungsten coating tips come as standard on DIABLO. Shearing bolt on each shank with maximum load of 5,000 lbs prevents any frame damages.
DIABLO
8
SUBSOILERS
8 9
QUICK-MATCHINGDIABLO is equipped with a heavy-duty 2” (Cat. 4) towing eye drawbar. Drawbar inclination can be comfortably adjusted from tractor seat just acting on the hydraulic cylinder to ensure maximum stability in transport and to set shank gangs down-pressure on the run.
10 11
SUBSOILERS
The sub-soiler models PINOCCHIO, ATTILA, ARTIGLIO and ARTIGLIO MAGNUM are equipped with a double counter-rotating spike roller having Ø of 6” or 9” and a blades number variable from 16 (for 4,3’ versions) to 96 (for 16’ versions). The high number of spikes and the large diameter improve residue sizing and incorporation, clod shattering and soil levelling.
Easy adjustmentsThe double roller sets the
working depth, using two sturdy cylinders. They can be
easily adjusted from the cab. In the presence of high quantity
of residue, it is possible to change the rear rollers inclination by
two mechanical jacks, avoiding clogging.
DOUBLE SPIKE ROLLER
12 13
SUBSOILERS
The ARTIGLIO MAGNUM requires high-power tractors (from 190 to 400 HP) and it can reach a working depth up to 28”. The shanks (from 5 to 9 according to the working width) are 1,6” thick and they are equipped with shear bolts safety system (5 spare bolts come as standard). The welded frame has an ultra-high soil clearance (3.8‘) and the two gangs are 3’ spaced. The exclusive “wave” design of frame flanks improves soil and residue flows preventing clogging even at high working speeds.
ARTIGLIO MAGNUMThe ARTIGLIO and ARTIGLIO HYDRO require from 150 to 390 HP, according to the working width
(from 8’ to 16’) and the number of shanks (from 5 to 11). The 1,2” thick shanks are equipped with shear bolts safety system (5 spare bolts come as standard) or with hydro-pneumatic auto-reset
circuit with double nitrogen accumulator and safety valve (only on HYDRO versions). These models are characterized by a completely welded frame with 3’ for both soil clearance and gangs spacing. The
working depth can be hydraulically adjusted from the cab up to 22”.
ARTIGLIO
14 15
SUBSOILERS
The PINOCCHIO model is designed for low or medium power tractors (from 50 to 160 HP). It is characterized by a maximum working depth of 18”. PINOCCHIO is available in different widths (from
4,3’ and 10’) and shanks number (from 3 to 7). The 1,2” thick shanks are equipped with shear bolts safety system and the double rear roller can be manually adjusted using a pin system. The bolt-on
frame has a ground clearance of 2,6’ while the front and the rear gangs are 2,1’ spaced.
The ATTILA and ATTILA HYDRO models have been developed for medium HP tractors (from 110 to 240 HP). They are characterized by a maximum working depth up to 18”, hydraulically adjustable from the cab. Different working widths are available (from 8” to 13”) with a shanks number variable from 5 to 9. The 1,2” thick shanks are equipped with shear bolts safety system or with hydro-pneumatic auto-reset circuit with double nitrogen accumulator and safety valves (only on HYDRO versions). The sturdy bolt-on frame has a ground clearance of 2,6’ while the front and the rear gangs are 2,8’ spaced.
PINOCCHIOATTILA
16 17
SUBSOILERS
TECHNICAL SPECIFICATIONS
HPKW inft N. TINES lbARTIGLIOMAGNUM
250/5
300/5
300/7
400/7
400/9
41502858190 - 280139 - 206
5250
5900
6900
7500
28
28
28
28
5
7
7
9
10
10
13
13
210 - 310
240 - 340
260 - 360
310 - 400
155 - 228
176 - 250
192 - 265
228 - 295
HPKW N. DISCSft N. TINES
DIABLO500/11
600/13
700/15
182 x 231116400 - 500294 - 367
18
18
2 x 27
2 x 31
13
15
20
23
450 - 550
500 - 600
368 - 441
368 - 441
in
PIVOT / BALL Ø (in)
EYE / BALL Ø (in)
CAT. 3
38
50
CAT. 4
50
51
CAT. 5
70
71
K 80
80
80
K 110
110
110
CAT.
(1) Working depth
(1) Working depth
(1)
(1)
HP inft N. TINES lb
PINOCCHIO130/3
170/5
200/5
250/5
17001834,350 - 11037 - 81
22001855,670 - 13051 - 96
23001856,570 - 13051 - 96
2500185870 - 13051 - 96
(1) Working depth
250/7 28001878100 - 16074 - 118
300/7 305018710100 - 16074 - 118
KW
HPKW inft N. TINES lb
ATTILA250/5
300/5
300/7
ATTILA HYDRO 250/5
29001858110 - 15081 - 110
3200
3750
18
18
5
7
10
10
120 - 170
150 - 200
88 - 125
110 - 147
39001858110 - 15081 - 110
(1) Working depth
300/7 505018710150 - 200110 - 147
400/9 775018913190 - 240140 - 176
HPKW inft N. TINES lb
ARTIGLIO250/5
300/5
300/7
400/7
ARTIGLIO HYDRO250/5
33502258150 - 220110 - 147
3850
4400
6200
22
22
22
5
7
7
10
10
13
170 - 220
190 - 250
210 - 270
125 - 162
140 - 184
155 - 199
400/9 685022913220 - 330161 - 242
47002258150 - 250110 - 184
(1) Working depth
300/7 570022710180 - 280132 - 206
400/9 860022913250 - 350184 - 257
500/11 7450221116250 - 390184 - 287
(1)
(1)
(1)
18 19
SUBSOILERS
11-1
4 C
od. W
0023
0010
R -
Mas
chio
Gas
pard
o M
arke
ting
Dep
artm
ent
For g
raph
ic re
ason
s, s
ome
pict
ures
and
imag
es d
o no
t sho
w th
e “E
C” s
afet
y gu
ards
.
Tec
hnica
l dat
as a
nd m
odel
s sh
own
in th
is ca
talo
gue
are
not b
indi
ng. W
e re
serv
e th
e rig
ht to
revis
e th
e co
nten
ts o
f thi
s ca
talo
gue,
to a
men
d or
impr
ove
the
spec
ificat
ions
with
out n
otice
.the winning team
DEALER:
Maschio Gaspardo North America Inc.Headquarters 112 3rd Ave EastDeWitt, IA, 52742tel. 563 659 6400fax 563 659 [email protected]