2
Generator Welders Shindaiwa Diesel Engine Generator Welders GENERATOR/WELDER Generator Welders [SOUND PROOF] DIESEL ENGINE DGW Series Optional Extras • Fire extinguisher • Oil drain extension • Service record holder • Service kit [ SOUND PROOF ] Minimal Sound Pollution DGW420DM/ANZ SALES FEATURES 3 Way Switch Welding, Generating or Simultaneous Mode Selection Exceptional Welding Performance Redial Current and Voltage Control System Dual Operator Mode 4mm Rod 2 Persons and 8mm Rod x 1 Person Individual Circuits No Interference when welding between side A, Side B or when using AC Current Air Arc Gouging 3.2-8.0mm Rods Battery Isolator Standard on all models Super Silenced 58dbA at 7m High Generating Performance 1 x 20 Amp 3 Phase Outlet, 3 x 15A Single Phase Outlets All Auxiliary Outlets are Earth Leakage and Overload Protected Digital Metering Reliable Japanese Digital Meters, Volts, Amps and Hz VRD Voltage Reduction Device Inbuilt switch to Test VRD Capability, with LED indication (Over Under Voltage) Compact and Lightweight 480kg, 1435mm x 700mm x 848mm Waterproof Construction External water draining so tank is free from ingress of water. Environmentally Friendly Tier 4 Engine Remote Controls 2 x 9 Pin Remote control inputs Wire Feeders Dual Wire Feeder Capability with 1 x 14 Pin Input Emergency Stop Emergency Stop switch standard Auto Output Reduction Sensing Excessive Rectifier Temperature & Frequency Auto Engine Safety Shutdown Sensing Oil Pressure, Water Temp,and Battery Charge Long Range Tank 14 Hr Fuel Tank Standard Selectable Wire Feeder Voltage 115V or 42V voltage capability Bunded Tank All internal fluids are protected by 110% capacity bunded tank Switching Sealed electronic contactors protect switches from ingress of dust

DGW Series - shindaiwa.com.au · Starter Motor Burnout Protection -Overrun Protection Device Air Arc Gouging -6.5mm Gouging Capability Fine Adjust Voltage -Manual Fine Generator Adjustment

  • Upload
    others

  • View
    3

  • Download
    0

Embed Size (px)

Citation preview

Page 1: DGW Series - shindaiwa.com.au · Starter Motor Burnout Protection -Overrun Protection Device Air Arc Gouging -6.5mm Gouging Capability Fine Adjust Voltage -Manual Fine Generator Adjustment

[SOUND PROOF] DIESEL ENGINE

GENERATOR/WELDER DGW Series

More Compact

More Effic ient

More Options

Exceptional Welding Performance -Unique Current Control SystemAutomatic Engine Idle -Longer Engine Life, Less Noise and Fuel EconomyDual Operator Feature -4mm Rod x 2 Persons & 8mm Rod x 1 PersonVoltage Reduction Device -Simple Switch to check VRD Capability Constant Voltage -CV/CC Power Digital Metering -Reliable Japanese Digital Meters. Volts, Amps & HzHigh Generating Performance -15kva, 1 x 20amp 3 phase Outlet, 3 x 15amp 240v Outlets -All Auxilliary Outlets are Earth Leakage ProtectedSuper Silenced -58 db(a) Quietest in the WorldCompact and Light Weight -482 kg 1519 x 700 x 760mmWater Proof Construction -External Drain Plugs easily accessibleAuto Engine Safety Shutdown -Sensing Oil Pressure,Water Temperature & Battery ChargeAuto Output Reduction -Sensing Excessive Rectifi er Temperature & Frequency Visible Fuel Gauge -Fuel Gauge With Night IlluminationEnvironmentally Friendly -Complies with EPA-2Starter Motor Burnout Protection -Overrun Protection DeviceAir Arc Gouging -6.5mm Gouging CapabilityFine Adjust Voltage -Manual Fine Generator AdjustmentEconomical (Eco) Mode (2100 rpm) -Low Noise & Prolonged Engine Life, 10% Less Fuel -Consumption. Capable of 220amps on Single use, 4mm RodRemote Control Facility -Optional remote Control on Single Operator

SALES F EATURESDGW400DM-415A

Genera to r Welde rs

Side Service PanelLarge side panels makes for

easy access and quicker daily inspections.

Shindaiwa Diesel Engine Generator Welders

[SOUND PROOF]Minimal Sound

Pollution

Shindaiwa Diesel Engine Generator Welders

GENERATOR/WELDER

[SOUND PROOF] DIESEL ENGINE

GENERATOR/WELDER DGW Series

More Compact

More Effic ient

More Options

Exceptional Welding Performance -Unique Current Control SystemAutomatic Engine Idle -Longer Engine Life, Less Noise and Fuel EconomyDual Operator Feature -4mm Rod x 2 Persons & 8mm Rod x 1 PersonVoltage Reduction Device -Simple Switch to check VRD Capability Constant Voltage -CV/CC Power Digital Metering -Reliable Japanese Digital Meters. Volts, Amps & HzHigh Generating Performance -15kva, 1 x 20amp 3 phase Outlet, 3 x 15amp 240v Outlets -All Auxilliary Outlets are Earth Leakage ProtectedSuper Silenced -58 db(a) Quietest in the WorldCompact and Light Weight -482 kg 1519 x 700 x 760mmWater Proof Construction -External Drain Plugs easily accessibleAuto Engine Safety Shutdown -Sensing Oil Pressure,Water Temperature & Battery ChargeAuto Output Reduction -Sensing Excessive Rectifi er Temperature & Frequency Visible Fuel Gauge -Fuel Gauge With Night IlluminationEnvironmentally Friendly -Complies with EPA-2Starter Motor Burnout Protection -Overrun Protection DeviceAir Arc Gouging -6.5mm Gouging CapabilityFine Adjust Voltage -Manual Fine Generator AdjustmentEconomical (Eco) Mode (2100 rpm) -Low Noise & Prolonged Engine Life, 10% Less Fuel -Consumption. Capable of 220amps on Single use, 4mm RodRemote Control Facility -Optional remote Control on Single Operator

SALES F EATURESDGW400DM-415A

Genera to r Welde rs

Side Service PanelLarge side panels makes for

easy access and quicker daily inspections.

Shindaiwa Diesel Engine Generator Welders

[SOUND PROOF]Minimal Sound

Pollution

[SOUND PROOF] DIESEL ENGINE

DGW SeriesOptional Extras

• Fire extinguisher • Oil drain extension • Service record holder • Service kit

[SOUND PROOF]

Minimal Sound Pollution

DGW420DM/ANZ SALES FEATURES3 Way Switch Welding, Generating or Simultaneous Mode SelectionExceptional Welding Performance Redial Current and Voltage Control SystemDual Operator Mode 4mm Rod 2 Persons and 8mm Rod x 1 PersonIndividual Circuits No Interference when welding between side A, Side B or when using AC CurrentAir Arc Gouging 3.2-8.0mm RodsBattery Isolator Standard on all models Super Silenced 58dbA at 7m High Generating Performance 1 x 20 Amp 3 Phase Outlet, 3 x 15A Single Phase Outlets All Auxiliary Outlets are Earth Leakage and Overload Protected Digital Metering Reliable Japanese Digital Meters, Volts, Amps and HzVRD Voltage Reduction Device Inbuilt switch to Test VRD Capability, with LED indication (Over Under Voltage)Compact and Lightweight 480kg, 1435mm x 700mm x 848mmWaterproof Construction External water draining so tank is free from ingress of water.Environmentally Friendly Tier 4 Engine Remote Controls 2 x 9 Pin Remote control inputs Wire Feeders Dual Wire Feeder Capability with 1 x 14 Pin InputEmergency Stop Emergency Stop switch standardAuto Output Reduction Sensing Excessive Rectifier Temperature & FrequencyAuto Engine Safety Shutdown Sensing Oil Pressure, Water Temp,and Battery ChargeLong Range Tank 14 Hr Fuel Tank Standard Selectable Wire Feeder Voltage 115V or 42V voltage capabilityBunded Tank All internal fluids are protected by 110% capacity bunded tankSwitching Sealed electronic contactors protect switches from ingress of dust

Page 2: DGW Series - shindaiwa.com.au · Starter Motor Burnout Protection -Overrun Protection Device Air Arc Gouging -6.5mm Gouging Capability Fine Adjust Voltage -Manual Fine Generator Adjustment

Dim

ensi

ons

DGW SeriesGENERATOR/WELDER[SOUND PROOF] DIESEL ENGINE

[SOUND PROOF] DIESEL ENGINE

GENERATOR/WELDER DGW Series

More Compact

More Effic ient

More Options

Exceptional Welding Performance -Unique Current Control SystemAutomatic Engine Idle -Longer Engine Life, Less Noise and Fuel EconomyDual Operator Feature -4mm Rod x 2 Persons & 8mm Rod x 1 PersonVoltage Reduction Device -Simple Switch to check VRD Capability Constant Voltage -CV/CC Power Digital Metering -Reliable Japanese Digital Meters. Volts, Amps & HzHigh Generating Performance -15kva, 1 x 20amp 3 phase Outlet, 3 x 15amp 240v Outlets -All Auxilliary Outlets are Earth Leakage ProtectedSuper Silenced -58 db(a) Quietest in the WorldCompact and Light Weight -482 kg 1519 x 700 x 760mmWater Proof Construction -External Drain Plugs easily accessibleAuto Engine Safety Shutdown -Sensing Oil Pressure,Water Temperature & Battery ChargeAuto Output Reduction -Sensing Excessive Rectifi er Temperature & Frequency Visible Fuel Gauge -Fuel Gauge With Night IlluminationEnvironmentally Friendly -Complies with EPA-2Starter Motor Burnout Protection -Overrun Protection DeviceAir Arc Gouging -6.5mm Gouging CapabilityFine Adjust Voltage -Manual Fine Generator AdjustmentEconomical (Eco) Mode (2100 rpm) -Low Noise & Prolonged Engine Life, 10% Less Fuel -Consumption. Capable of 220amps on Single use, 4mm RodRemote Control Facility -Optional remote Control on Single Operator

SALES F EATURESDGW400DM-415A

Genera to r Welde rs

Side Service PanelLarge side panels makes for

easy access and quicker daily inspections.

Shindaiwa Diesel Engine Generator Welders

[SOUND PROOF]Minimal Sound

Pollution

Generator / Welders ABN 14 079 381 481

Importer & Contact DetailsEmail: [email protected] Dowd Street Welshpool WA 6106Phone: +61 8 9258 5113 Fax: +61 8 9356 5535

Shindaiwa Generator Welders

Australasian Project Supplies Pty Ltd Trading as Selling Agent:

Wel

ding

Gen

erat

orAC

Gen

erat

orEn

gine

Main Control Panel - Featuring Reliable Japanese Digital Meters. Volts, Amps & Hertz

Generating Method Rotating Field

Operation Single Dual

CC Droop

Rated Current (A) 390 200

Rated Voltage (V) 35.6 28

Duty Cycle (%) 60 100

Current Adj. Range (A) 95-400 50-210

Welding Rod (mm) 2.6-8.0 2.0-4.0

Gouging Rod mm 3.2-8.0 3.2-5.0

CV

Rated Current (A) 350 200

Rated Voltage (V) 32.5 21

Duty Cycle (%) 100 100

Voltage Adj. Range (V) 14-35 14-23.5

Welding Wire (mm) 0.6-2.0 0.6-1.2

Rated Frequency (Hz) 50

Rated Speed (min-1) 3000

Phase 1-Phase (50Hz) 3-Phase (50Hz)

Rated Voltage (V) 240 415

Power Factor 1 0.8

Rated Output (kVA) 10.8 14

Rating Continuous

Model Kubota D1105

Type Vertical, Water-Cooled 4-Cycle Diesel Engine

Displacement (L) 1.123

Rated Output (kW/min-1) 18.5/3000

Fuel ASTM no 2 Diesel Fuel

Lubricant Oil Capacity (L) 5.1

Cooling Water Capacity (L) 4.3 (Sub Tank Capacity 0.6 L included)

Starting Method Electronic Starter Motor 12V

Battery 55B24L

Fuel Tank Capacity (L) 43

Length (mm) 1435

Width (mm) 700

Height (mm) 848

Dry Weight (kg) 480

DGW420DM/ANZModel