Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
DESIGN PROJECT
BRACELET“SPARKLING DOTS”
2 /5CREATE-YOUR-STYLE.COM
Step 1
16 cm x11.5 cm x2
Swarovski crystals Supplies & Tools
SuppliesChain, silver, 19 cm17x Head pins, silver1x Jump ring, silver, 4 mm3x Jump rings, silver, 6 mm1x Lobster clasp, silver
ToolsFlat nose pliersRound nose pliersRulerSide cutter
Level of design: BEGINNERHave also a look at the text instructions at the last page!
Article Product Group Article No. Amount Size Color Color Code
Beads 5052 8 pcs. 6 mm Crystal Rose Gold 001 ROGL
Beads 5052 9 pcs. 6 mm Crystal Silver Shade 001 SSHA
STEP 1
DESIGN PROJECT BRACELET “SPARKLING DOTS”
Wiring
3 /5CREATE-YOUR-STYLE.COM
Step 2
Repeat step x16
Step 3STEP 3
STEP 2
4 /5CREATE-YOUR-STYLE.COM
STEP 4
5 /5CREATE-YOUR-STYLE.COM
DESIGN PROJECT BRACELET “SPARKLING DOTS”
STEP 1: Cut two 1.5 cm long chains and one 16 cm long chain. STEP 2: Attach the 1.5 cm long chains to one of the ends of the 16 cm long chain using 6 mm jump rings. On the other end attach a
lobster clasp using a 4 mm jump ring.
STEP 3: Insert Swarovski Bead art. 5052 6 mm Crystal Rose Gold onto the headpin and turn a loop close to the bead as shown. Repeat this step 16 more times with the other beads.
STEP 4: Attach the headpins created in step 3 to the chain and to extension with 6mm jump ring as shown in the illustrations.