Dalian Xishun Foundry Co., Ltd - ppr pipe fittings...About Dalian Xishun Foundry AProfessional Factory since 2002 Dalian XishunFoundry Co., ltd. is located in Liaoning, Dalian which

Dalian Xishun Foundry Co., Ltd.

Quality, Integrity and innova�ve factory in China

Universal Couplings • Stepped Coupling • Flexible Couplings • Flange Adaptors

Dismantling Joints • Service Saddles • Large Tolerance Saddle • Clamp Tee

Repair Clamp • Duc�le Cast Iron Fi�ngs • Push On Type Fi�ngs

Flanged Pipe Fi�ngs • Tapping Sleeves

About Dalian Xishun Foundry A Professional Factory since 2002

Dalian XishunFoundry Co., ltd. is located in Liaoning, Dalian which is famous for its interna�onal

port and abundant iron ore, coke, steel and other industrial raw materials. Our factory was

established in 2002, and we are a professional manufacturer of duc�le iron products. We have

the independent right of import and export.

With rich resources of pig irons, coke, steel and other industrial raw materials, we are one of the leading manufacturers of Ductile iron pipes, Ductile Iron Pipe Fittings, Flange Adaptors, Couplings, Dismantling Joints, Valves, Manhole Covers, Steel Flanges, Carbon steel pipe fittings, malleable iron pipe fittings, Rubber O rings, Fasteners. Pumps, Motor Shells and other Castings and Forgings according to different standards such as ISO2531, EN545, EN14525, ISO4422, ISO7005, DIN3352, BS5163, DIN3202, BS2494, BS4504, EN124 and other relevant ISO, EN, BS, DIN, ANSI, AWWA standards.

Expor�ng to More Than 25 Countries

Our products are widely used in pipeline systems for drinkable water, sewage, oil, gas, chemical

plants and so on, and they have been widely exported to Europe, the Middle East, Southeast Asia,

Africa, and La�n and South America. Till now, we have been expor�ng our products to more than

50 countries all over the world, and they are well accepted by the customers, which help us to

build a good reputa�on both in China and abroad.

Cooperate with Us Today

We always believe that prosperity due to integrity and capacity. We’d like to cooperate with

friends from all around the world to make a win‐win situa�on and be�er future.

Ductile Iron Fittings For DI,Steel,uPVC,CI,AC,GRP Pipe ISO2531:2000/BSEN545:2000

Mob: 15205799916

E-mail: [email protected]

Universal Couplings

Universal Adaptors

Stepped Couplings

Stepped Adaptors

Flexible Couplings

Flange Adaptors

Dismantling Joints

Service Saddles

uPVC Fittlings(D.I)

Universal Couplings For DI,Steel,uPVC,CI,AC,GRP Pipe ISO2531:2000/BSEN545:2000

SPECIFICATION mm/"

PIPE O.D. RANGE mm

PIPE MATERIALS

50mm/2" 59-72 STEEL ,UPVC, DI, CI , AC ,ABS,GRP,ect.

65mm/2.5" 72 -85 STEEL ,UPVC, DI, CI, AC ,ABS,GRP,ect.

80mm/3" 88 -103 STEEL ,UPVC, DI, CI, AC ,ABS,GRP,ect.










MAX WORKING PRESURE: 16 BAR SETTING GAP: 19mm TOLERANCE ON ANGULAR DEFLECTION: 6 DEGREES EXPANSION & CONTRACTION RANGE: 0-10mm RECOMMENDED BOLT TORQUE: 70-80 Nm

MATERLAL SPECLFICATIONS

1 BOLTS AND NUTS BS970:1991 GRADE 070M20 SABS 1143:1977 GRADE4.8

2 BOLT COATLNG Hot Dipped Gaivanised:BS 729:1971 SABS 763:1988 Electro Galvanised Zinc:BS1706:1990

3 STEEL SLEEVE BSEN 10025 1997

4 CAST FOLLOWER BS 2789:1985 GRADE 420/12 SABS936:1969/BSEN1563:1997

5 RUBBER GASKET EPDM to:ISO4633:1983 & BS2494:1990:BS6920 Approved

6 SPECIALISED COATINGS Fusion Bonded Epoxy:SABS 121 7:1984(BS6920 Approved)or Rilsan Nylon11

RANGER PRODUCTS COMPLY WITH AWWA: C219, BS 534 : 19 90, BS 4772 : 1998 AND SABS 1808-2 : 1998

For DI,Steel,uPVC,CI,AC,GRP Pipe ISO2531:2000/BSEN545:2000

SPECIFICATION mm/"

PIPE O.D. RANGE mm

PIPE MATERIALS

50mm/2" 59-72 STEEL ,UPVC, DI, CI, AC ,ABS,GRP,ect.

65mm/2.5" 72-85 STEEL ,UPVC, DI, CI, AC ,ABS,GRP,ect.










MAX WORKING PRESURE: 16 BAR

SETTING GAP: 19mm

TOLERANCE ON ANGULAR DEFLECTION: 3 DEGREES

EXPANSION & CONTRACTION RANGE: 0-5mm

RECOMMENDED BOLT TORQUE: 70-80 Nm

MATERIAL SPECIFICATIONS

1 BOLTS AND NUTS

BS 970 : 1991 GRADE 070M20 SABS 1143 : 1977 GRADE 4.8

2 BOLT COATING

Hot Dipped Galvanised: BS 729 : 1971 SABS 763 : 1988 Electro Galvanised Zinc: BS 1706 : 199 0

3 CAST FOLLOWER: ADAPTOR BODY:

BS 2789 : 1985 GRADE 420/12 SABS 936 : 1969 / BS EN 1563 : 1997

4 RUBBER GASKET: EPDM to : ISO 4633 : 1983 & BS 2494 : 1990 : BS 6920 Approved

5 SPECIALISED COATINGS: Fusion Bonded Epoxy: SABS 1217 o:v e1d9)8 4o r( BRSi l6s9a2n0 NAyplporn 1 1

RANGER PRODUCTS COMPLY WITH AWWA: C219, BS 534 : 19 90, BS 4772 : 1998 AND SABS 1808-2 : 1998


Stepped Coupling For D.I Pipe-PVC Pipe Dimension in mm

PVC DN D 1

D 2 D 4 D 5 L 1 L 2 t M N

80 98 88.9 169 198 102 178 7.0 12 4

100 118 114.3 189 218 102 178 7.5 12 4

150 170 168.3 241 270 102 178 8.0 12 4

200 222 219.1 293 322 102 178 8.5 12 6

250 274 273.0 345 374 102 178 9.0 12 6

300 326 323.9 397 426 102 178 10.0 12 8

350 378 355.6 458 491 152 262 10.5 16 8

400 429 406.4 509 542 152 262 11.0 16 8

450 480 457.0 556 589 152 262 11.5 16 10

500 532 508.0 608 641 152 262 12.0 16 10

600 635 610.0 711 744 152 262 13.5 16 12

700 738 711.0 814 847 152 262 14.5 16 12

800 842 813.0 918 951 152 262 16.0 16 12

900 945 914.0 1031 1064 178 278 17.0 16 14

1000 1048 1016.0 1134 1167 178 278 18.0 16 14

1100 1152 1118.0 1245 1278 178 290 19.5 16 16

1200 1255 1220.0 1348 1381 178 290 20.5 16 18


F lexible Coupling For D.I Pipe Dimension in mm

DN D2 D4 D5 L1 L2 t M N

80 98 169 198 178 102 7.0 12 4

100 118 189 218 178 102 7.5 12 4

125 144 215 244 178 102 7.5 12 4

150 170 241 270 178 102 8.0 12 4

200 222 293 322 178 102 8.5 12 6

250 274 345 374 178 102 9.0 12 6

300 326 397 426 178 102 10.0 12 8

350 378 458 491 262 152 10.5 16 8

400 429 509 542 262 152 11.0 16 8

450 480 556 589 262 152 11.5 16 10

500 532 608 641 262 152 12.0 16 10

600 635 711 744 262 152 13.5 16 12

700 738 814 847 262 152 14.5 16 12

800 842 918 951 262 152 16.0 16 12

900 945 1031 1064 278 178 17.0 16 14

1000 1048 1134 1167 278 178 18.0 16 14

1100 1152 1245 1278 290 178 19.5 16 16

1200 1255 1348 1381 290 178 20.5 16 18

1400 1462 1555 1588 290 178 23.0 16 20

1500 1565 1658 1691 290 178 24.0 16 20

1600 1668 1761 1794 290 178 25.5 16 24

Flange Adaptors


Flange Adaptor For Ductile iron pipe ( Flange drilled to BS 4504:1989 PN 16 ) Dimension in mm

DN D2 D3 D4 D5 Do L t A B φE N M n

80 98 132 160 200 166 73 7.0 3 16.0 19 8 M12 4

100 118 156 180 220 187 76 7.5 3 16.0 19 8 M12 4

125 144 184 210 250 210 76 7.5 3 16.0 19 8 M12 4

150 170 211 240 285 240 76 8.0 3 16.0 23 8 M12 4

200 222 266 295 340 295 76 8.5 3 17.0 23 12 M12 6

250 274 319 355 400 355 90 9.0 3 19.0 28 12 M12 6

300 326 370 410 455 410 90 10.0 4 20.5 28 12 M12 6

350 378 429 470 520 470 110 10.5 4 22.5 28 16 M16 8

400 429 480 525 580 525 110 11.0 4 24.0 31 16 M16 8

450 480 544 585 640 585 110 11.5 4 26.0 31 20 M16 10

500 532 609 650 715 650 115 12.0 4 27.5 34 20 M16 10

600 635 720 770 840 770 115 13.5 5 31.0 37 20 M16 10

700 738 794 840 910 840 115 14.5 5 34.5 37 24 M16 12

800 842 901 950 1025 950 115 16.0 5 38.0 40 24 M16 12

900 945 1001 1050 1125 1050 115 17.0 5 41.5 40 28 M16 14

1000 1048 1112 1170 1255 1170 115 18.0 5 45.0 43 28 M16 14

1100 1152 1215 1270 1355 1270 130 19.5 5 48.5 43 32 M16 16

1200 1255 1328 1390 1485 1390 130 20.5 5 52.0 49 32 M16 16

1400 1462 1530 1590 1685 1590 130 23.0 5 55.0 49 36 M20 18

Bolts & Nuts Electroplated Galvanized Zinc.

Hot Dip Galvanized or S.S available at extra cost

BS 729:1971,ISO1461

Flange Body Ductile Iron BS 2789:1985 Grade 420-12

End Gland Ring Ductile Iron BS 2789:1985 Grade 420-12

Rubber Gasket SBR or EPDM BS 2494:1990 Type W

Minimum 200 um thick

Dismantling Joints(Type “A”

For Ductile Iron Flange Joints ISO2531:2000/BSEN545:2000

A double flanged composite fitting, featuring a telescopic

action between a flanged spigot and a flange adaptor, specially

designed to provide longitudinal adjustment in flanged pipe

systems. Dismantling joints also provide a simple method for

the installation and removal of flanged valves, pumps, flow

meters and flanged pipe work. Tie rods are provided for final

anchoring and location and also double as flange jointing bolts

reducing the number of these required. CJM manufactures

Dismantling Joints in a wide range of sizes & lengths, to

standard & customer specifications.

（（（（Type “A”））））

(Type “B”)

DESCRIPTION MATERIAL

1 FLANGE BODY DUCTILE IRON GGG50/ASTMA536 65-45-12

2 GLAND DUCTILE IRON GGG50/ASTMA536 65-45-12

3 FLANG SPIGOT DUCTILE IRON GGG50/ASTMA536 65-45-12

4 SEALING RING NATURAL RUBBER/SBR/NBR/EPDM

5 SHORT BOLT/NUT/ WASHER ELECTRO GALVANIZED STEEL4. 8GRADE

6 LONG BOLT/NUT/ WASHER ELECTRO GALVANIZED STEEL4.8 GRADE

7 COATING GPOXY (THICKNESS ：250-300um.)

FLANGED DRILLING TO ISO2531/BS4504 ：PN10/16/25/40

TEST PRESSURE:DN80-300 TO 25bar,DN350-600 TO 16bar,DN700- 2600 TO 10bar.

Dismantling Joints(Type “A”) For Ductile Iron Flange Joints ISO2531:2000/BSEN545:2000

Dimensions in mm

PN10 PN16 PN25 DN

(mm) D n d2 L1 L2 D n d2 L1 L2 D n d2 L1 L2

40 150 4 M16 180 280 10 150 4 M16 180 280 150 4 M16 190 3

50 165 4 M16 180 280 10 165 4 M16 180 280 165 4 M16 200 3

65 185 4 M16 180 280 10 185 4 M16 180 280 185 8 M16 200 3

80 200 8 M16 200 310 30 200 8 M16 200 310 200 8 M16 210 3

100 220 8 M16 200 310 40 220 8 M16 200 310 235 8 M20 220 3

125 250 8 M16 200 310 70 250 8 M16 200 310 270 8 M24 220 3

150 285 8 M20 200 320 70 285 8 M20 200 320 300 8 M24 230 3

175 315 8 M20 220 340 315 8 M20 220 340 330 12 M24 230 370

200 340 8 M20 220 340 34307 0 12 M20 220 340 360 12 M24 230

250 395 12 M20 220 360 0 4054 10 12 M24 230 370 425 12 M27 25

300 445 12 M20 220 360 0 4604 10 12 M24 250 410 485 16 M27 25

350 505 16 M20 230 360 0 5204 40 16 M24 260 410 555 16 M30 27

400 565 16 M24 230 370 0 5804 80 16 M27 270 430 620 16 M33 28

450 615 20 M24 250 390 0 6404 80 20 M27 270 430 670 20 M33 28

500 670 20 M24 260 390 0 7154 80 20 M30 280 440 730 20 M33 30

600 780 20 M27 260 410 0 8405 20 20 M33 300 480 845 20 M36 32

700 895 24 M27 260 410 0 9105 30 24 M33 300 480 960 24 M39 34

800 1015 24 M30 290 460 1032650 246 00 M36 320 520 1085 24 M45

900 1115 28 M30 290 460 112358 0 286 00 M36 320 520 1185 28 M45

1000 1230 28 M33 290 480 1245050 286 50 M39 340 560 1320 28 M52

1100 1340 32 M33 300 480 1355 32 M39 340 560 1420 32 M52

1200 1455 32 M36 320 520 1448550 327 20 M45 360 600 1530 32 M52

1300 1575 32 M39 340 530 1585 32 M45 370 610

1400 1675 36 M39 360 560 1685 36 M45 380 630 1755 36 M56

1500 1785 36 M39 380 590 1820 36 M52 M56

1600 1915 40 M45 390 600 1930 44 M52 1975 40 M56

Dismantling Joints(Type “B”) For Ductile Iron Flange Joints ISO2531:2000/BSEN545:2000

Dimensions in mm

PN10 PN16 PN25 DN

(mm) D n d2 L1 L2 D n d2 L1 L2 D n d2 L1 L2

40 150 4 M16 180 280 10 150 4 M16 180 280 150 4 M16 190 3

50 165 4 M16 180 280 10 165 4 M16 180 280 165 4 M16 200 3

65 185 4 M16 180 280 10 185 4 M16 180 280 185 4 M16 200 3

80 200 4 M16 200 310 30 200 4 M16 200 310 200 4 M16 210 3

100 220 4 M16 200 310 40 220 4 M16 200 310 235 4 M20 220 3

125 250 4 M16 200 310 70 250 4 M16 200 310 270 4 M24 220 3

150 285 4 M20 200 320 70 285 4 M20 200 320 300 4 M24 230 3

175 315 4 M20 220 340 70 315 4 M20 220 340 330 6 M24 230 3

200 340 4 M20 220 340 70 340 4 M20 220 340 360 6 M24 230 3

250 395 4 M20 220 360 10 405 4 M24 230 370 425 6 M27 250 4

300 445 4 M20 220 360 10 460 4 M24 250 410 485 8 M27 250 4

350 505 4 20 230 360 520 4 M24 260 410 555 8 M30 270 440

400 565 4 M24 230 370 80 580 4 M27 270 430 620 8 M33 280 4

450 615 5 M24 250 390 640 5 M27 270 430 670 10 M33 280 480

500 670 5 M24 260 390 715 5 M30 280 440 730 10 M33 300 480

600 780 5 M27 260 410 840 5 M33 300 480 845 10 M36 320 520

700 895 6 M27 260 410 910 6 M33 300 480 960 12 M39 340 530

800 1015 6 M30 290 460 60 10256 00 6 M36 320 520 1085 12 M45 3

900 1115 7 M30 290 460 80 1125 600 7 M36 320 520 1185 14 M45 3

1000 1230 7 M33 290 480 00 12556 50 7 M39 340 560 1320 14 M52 4

1100 1340 8 M33 300 480 1355 8 M39 340 560 1420 16 M52

1200 1455 8 M36 320 520 50 14857 20 8 M45 360 600 1530 16 M52 4

1300 1575 8 M39 340 530 1585 8 M45 370 610

1400 1675 9 M39 360 560 1685 9 M45 380 630 1755 18 M56

1500 1785 9 M39 380 590 9 M52 M56

1600 1915 10 M45 390 600 10 M52 1975 20 M56

Service Saddles For DI,Steel,uPVC,CI,AC,GRP Pipe ISO2531:2000/BSEN545:2000

MATERIAL

BODY:DUCTILE CAST IRON OR CAST BRONZE 85-5-5%

STRAPS & NUTS:MILD STEEL,ZINC PLATED OR STAINLESS S TEEL NO304

GASKET:NEOPRENE OR EPDM,50-55SHORE,RESISTANT TO OIL ,ACID,NATURAL GAS

AT TEMPERATURE UP TO225 0F

COATONG

STANDARD COATING:RED OXIDE PRIMER,OR TAR EPOXY

HOT DIP GALVANIZED,FUSION-BONDED EPOXY AND RILSAN N YLON II COATING ALSO AVAILABLE.

FEATURES TECHNICAL DATA

·WI DE RANGE OF FIT

---CJM SERVICE &

WATER WORKS SADDLES ARE

DESIGNED FOR USE ON AC PIPE,

CAST CR DUCTILE IRON PIPE OR STEEL PIPE

· DOUBLE OR SINGLE STRAP CONSTRUCTION.

· STRAPS HAVE COLD ROLLED

THREADS FOR EXTRA STRENGTH

AND DURABILITY.

· WIDE RANGE OF TAP SIZES

---SADDLES ARE AVAILABLE

WITH 1/2〞THRU 2 〞IPT AND

BSPT OR CORPORATION TAP

SIZES.

· LIGHT WEIGHT/LOW COST

---SADDLES ARE RUGGEDLY

CONSTRUCTED OF HIGH GRADE

DUCTILE IRON OR BRONZE FOR

STRENGTH AND LASTING PERFORMANCE.

THIS CONSTRUCTION SAAURES LIGHT

WEIGHT HANDL ING FOR EASY,

LOW COST INSTALLATION.

· OREN SLOT ON ONE SIDE FOR

FAST,EASY INSTALLATION.

· MASSIVE O-RING PROVIDES PRIMARY SEAL-A

TIME-PROVEN DESIGN.

· SELF-SEALING HYDRO-DYNAMIC LIP.

---HIGH PRESSURE,WATER HAMMER

AND PRESSURE SURGES TIGHTEN

THE SEAL.

W.P PIPE

DN

PIPE O.D

RANGE

APPROX WEIGHT

(kg) DUCTILE (bar) BRONZE (bar)

mm mm SINGLE

STRAP

DOUBLE

STRAP

SINGLE

STRAP

DOUBLE

STRAP

SINGLE

STRAP

DOUBLE

STRAP

32 41-45 1.80 2.49 16 25 10 16

40 46-51 1.83 2.56 16 25 10 16

50 57-64 2.10 2.95 16 25 10 16

65 66-83 2.35 4.38 16 25 10 16

80 82-89 2.50 5.25 16 25 10 16

80 94-104 2.98 6.38 16 25 10 16

100 112-124 4.0 6.70 16 25 10 16

100 125-134 4.45 6.83 16 25 10 16

125 138-146 4.75 7.50 16 25 10 16

150 164-172 4.88 7.73 16 25 10 16

150 174-185 5.0 8.0 16 25 10 16

200 215-226 5.25 8.85 16 25 10 16

200 230-245 5.88 9.50 16 25 10 16

250 165-280 8.40 11.0 16 25 10 16

250 282-300 8.70 12.50 16 25 10 16

300 315-337 9.88 13.05 16 25 10 16

300 343-362 10.25 13.43 16 25 10 16

Large Tolerance Saddle ISO2531:2000/BSEN545:2000

Material:

1. Body: GGG40, coated with Rilsan

Nylon 11 blue color with 250 micrometer up.

2. Gasket: NBR

3. Assembling with 4 stud bolts, nuts and washers with AISI 304 material.

DN D D1 H L L1

63 3/4 38 57 124 100

63 1" 38 57 124 100

63 1 1/4" 40 62 124 100

63 1 1/2" 40 62 124 100

63 2" 40 68 124 100

75 3/4 40 63 135 110

75 1" 40 63 135 110

75 1 1/4" 40 68 135 110

75 1 1/2" 40 68 135 110

75 2" 40 73 135 110

90 3/4 40 71 150 110

90 1" 40 71 150 110

90 1 1/4” 40 75 150 110

90 1 1/2" 40 75 150 110

90 2" 50 80 150 110

110 3/4 40 71 170 120

110 1" 40 71 170 120

110 1 1/4" 40 85 170 120

110 1 1/2" 50 85 170 120

110 2" 50 90 170 120

125 1" 40 87 192 120

125 1 1/4" 40 93 192 120

125 1 1/2" 50 93 192 120

125 2" 50 98 192 120

140 1" 40 96 208 120

140 1 1/4" 40 100 208 120

140 1 1/2" 50 100 208 120

140 2" 50 106 208 120

160 1" 40 106 230 120

160 1 1/4" 40 111 230 120

160 1 1/2" 50 111 230 120

160 2" 50 116 230 120

200 1" 40 132 282 120

200 1 1/4" 40 132 282 120

200 1 1/2" 50 137 282 120

200 2" 50 137 282 120

Clamp Tee (PN10/16) For DFor DFor DFor D....IIII.... P PP Pipeiippeeipe ISO2531:2000/BSEN545:2000ISO2531:2000/BSEN545:2000ISO2531:2000/BSEN545:2000ISO2531:2000/BSEN545:2000

Material: Working pressure:

EN-GJS500 or QT 420-10 or ASTM A536 65-45-12or GGG50 Pressure test 350 psi(24 bar), working pressure 230 psi(16 bar).

Gasket: Bolts and nuts:

NBR suitable for natural gas usage, EPDM for potable water Bolts with nut and washer. Bolts BS EN20898-1: 1992 Grade 4.8

PRESSURE SIZE

（DN ）

FLANGE

DRILLING(DN)

PIPE OD

RANGE(mm) PN 10/16

BOLT SIZE

(mm)

BOLT

QUANTITY

L

(mm)

H

(mm)

C

(mm)

80 80 95-98 PN 10/16 M16�65 4 220 165 160

100 80 115-118 PN 10 /16 M16�65 4 220 175 180

100 100 115-118 PN 10/16 M16�65 4 240 180 180

150 80 167-170 PN 10 /16 M20�70 6 220 205 240

150 100 167-170 PN 10/16 M20�70 6 240 210 240

150 150 167-170 PN 10/16 M20�70 6 290 220 240

200 80 219-222 PN 10/16 M20�70 6 220 235 290

200 100 219-222 PN 10/16 M20�70 6 240 240 290

200 150 219-222 PN 10/16 M20�70 6 290 250 290

200 200 219-222 PN 10/16 M20�70 6 340 260 290

250 80 270-274 PN 10/16 M24�85 8 220 270 350

250 100 270-274 PN 10/16 M24�85 8 240 270 350

250 150 270-274 PN 10/16 M24�85 8 290 290 350

250 200 270-274 PN 10/16 M24�85 8 340 290 350

250 250 270-274 PN 10/16 M24�85 8 390 300 350

300 80 322-326 PN 10 /16 M24�85 8 220 300 400

300 100 322-326 PN 10/16 M24�85 8 240 300 400

300 150 322-326 PN 10/16 M24�85 8 290 320 400

300 200 322-326 PN 10/16 M24�85 8 340 320 400

300 250 322-326 PN 10/16 M24�85 8 390 330 400

300 300 322-326 PN 10/16 M24�85 8 440 340 400

Repair Clamp

Material:

1.Bend

Stainless steel AISI 304

2.Body

GGG40,EN-GJS.400-15UNI EN 1563

This kind of clamp are used to quick repair the leaked pipes.

Lt is consist of onestainless bend,one set of bolt,two special

Casting parts,and one sheet of NBR gasket, the cast body

Can be Rilsan 11 Nylon coating or Hot dip Galvanized.

The size range are from DN15 to DN200.

DN (mm) DN Range L (mm) Weight(kg)

80 3" 88-110 200 7.0

100 4" 100-120 200 7.0

100 4" 108-128 200 7.5

100 4" 114-137 200 7.5

125 5" 138-160 200 8.0

150 6" 160-182 200 8.0

200 8" 195-217 200 8.5

200 8" 216-238 200 9.0

200 8" 229-249 200 9.0

250 10" 240-262 200 9.5

250 10" 250-273 200 9.5

200 8" 229-249 300 13.5

250 10" 240-262 300 14.0

250 10" 262-284 300 14.0

250 10" 273-296 300 14.0

300 12" 295-315 300 14.0

300 12" 324-346 300 16.0

350 14" 346-368 300 16.0

350 14" 365-387 300 17.0

400 16" 410-432 300 17.0

Size Inch Range U.Wgt

DN15 1/2 21-25 0.24

DN20 3/4 26-30 0.25

DN25 1 33-37 0.27

DN32 11/4 42-45 0.38

DN40 11/2 48-51 0.39

DN40 11/2 50-54 0.39

DN50 2 60-64 0.49

DN65 21/2 69-73 0.50

DN65 21/2 71-76 0.50

DN80 3 87-93 0.51

DN80 3 94-100 0.52

DN80 3 99-104 0.65

DN100 4" 105-111 0.65

DN100 4" 112-117 0.66

DN100 4" 120-126 0.66

DN100 4" 126-131 0.66

DN125 5" 131-136 0.69

DN125 5" 139-145 0.72

DN125 5" 149-155 0.72

DN150 6" 156-162 0.74

DN150 6" 167-173 0.76

DN175 7" 173-179 0.76

DN200 8" 217-223 0.80

DN200 8" 223-229 0.82

D u c t i l e C a s t I r o n F i t t i n g s For uPVC Pipes DIN 8061/8062

Mob:15205799916, 13606566995

Push On Type Fittings

For uPVC Pipes DIN 8061/8062

Push On Type Fittings For uPVC Pipes DIN 8061/8062

Measurements Of Push on Type Sockets

Dimensions in mm

DN D D1 D2 R1 R2 R3 A L

50 50.0+0.2 50.4+0.6 61.7+0.7 4.5+0.8 9±1.5 16±2 26.3 14

63 63.0+0.2 63.6+0.7 80.0+0.8 5.0+0.8 10±2 18±2 30.5 15

75 75.0+0.25 75.6+0.7 93.9+0.8 5.5+0.8 11±2 20±2 35.5 16

90 90.0+0.25 90.7+0.8 110.7+0.8 6.0+1 12±2 22±3 38.5 17

110 110.0+0.3 110.8+0.9 132.5+0.9 6.5+1 14±2 25±4 43 18

125 125.0+0.3 125.9+1.0 147.4+1.0 7.0+1 15±2 27±4 45 19

140 140.0+0.35 148.9+1.1 164.2+1.0 7.0+1 16±2 29±4 47 20

160 160.0+0.35 161.0+1.1 186.0+1.1 7.5+1.2 19±3 32±5 51 22

180 180.0+0.35 181.1+1.1 207.6+1.2 7.8+1.2 20±3 35±6 56 23

200 200.0+0.4 201.2+1.1 227.6+1.2 8.0+1.2 22±4 37±7 56 24

225 225.0+0.45 226.4+1.1 254.5+1.2 8.5+1.4 25±4 41±7 62 26

250 250.0+0.5 251.5+1.1 282.6+1.4 9.0+1.6 27±4 44±7 66.5 27

280 200.0+0.55 281.6+1.2 314.7+1.4 10.0+1.6 29±4 48±8 72.5 29

315 315.0+0.6 316.8+1.2 351.3+1.6 10.5+1.8 33±5 54±10 77.5 30

355 355.0+0.65 357.0+1.2 394.7+1.8 11.0+2 37±5 58±10 85 33

400 400.0+0.7 402.2+1.2 443.1+2.0 11.5+2 39±5 65±13 88 36

450 450.0+0.8 452.5+1.3 495.4+2.0 13.5+2.2 44±6 72±13 98 42

500 500.0+0.9 502.6+1.4 549.6+2.0 14.5+2.4 51±6 81±13 110.5 48

560 560.0+1.0 562.8+1.4 614.0+2.1 15.8+2.6 56±6 88±14 127.0 52

630 630.0+1.1 633.1+1.5 688.8+2.1 17.2+2.8 62±7 98±14 139.0 62

710 710.0+1.2 713.4+1.6 774.6+2.3 18.8+3 70±8 108±14 154.0 66



Flanged Sockets

Flanged Spigot

DN Ød D K A L

50 63 165 125 100 95

60 63 110 95

60 75 110 100

65 63 110 95

65 75 185 145 110 100

80 75 120 100

80 90 200 160 120 105

80 110 130 115

80 160 200 145

100 90 120 105

100 110 220 180 130 115

150 160 280 240 170 145

200 200 192 155

200 225 340 295 190 155

250 250 220 175

250 280 400 350 230 185

300 315 455 400 240 190

DN Ød D K A L

50 63 165 125 125 95

65 75 185 145 130 100

80 90 200 160 125 95

100 110 220 180 130 95

150 160 285 240 160 120

200 200 170 130

200 225 340 295 205 170

250 250 200 150

250 280 400 350 245 200

300 315 455 400 200 155


Double Socket Collar-Threaded Branch

Ød G A L H

63 1〞 230 95 60

63 1 1/4〞 240 95 60

63 1 1/2〞 245 95 60

63 2〞 255 95 60

75 1〞 246 100 64

75 1 1/4〞 256 100 64

75 1 1/2〞 260 100 64

75 2〞 275 100 64

90 1〞 250 105 80

90 1 1/4〞 260 105 80

90 1 1/2〞 265 105 80

90 2〞 275 105 80

90 3〞 305 105 95

110 1〞 270 115 90

110 1 1/4〞 280 115 90

110 1 1/2〞 285 115 90

110 2〞 295 115 90

110 3〞 325 115 120

110 4〞 355 115 115

160 1〞 320 145 115

160 1 1/4〞 330 145 115

160 1 1/2〞 335 145 115

160 2〞 345 145 115

160 3〞 375 145 135

200 1〞 360 155 135

200 2〞 380 155 140

225 1〞 350 155 150

225 1 1/4〞 360 155 150

225 1 1/2〞 365 155 150

225 2〞 375 155 150

250 1〞 390 175 160

250 2〞 415 175 165

280 2〞 460 185 175

315 2〞 450 190 195


Double Socket Collar

Double Socket Reducer

Ød A L

63 255 95

75 275 100

90 305 105

110 355 115

160 375 145

200 380 155

250 415 175

280 460 185

315 450 190

Ød1 Ød2 A L1 L2

75 63 210 100 95

90 63 215 105 95

90 75 225 105 100

110 63 240 115 95

110 75 250 115 100

110 90 250 115 105

160 90 290 145 105

160 110 300 145 115

200 90 310 155 105

200 110 310 155 115

200 160 340 155 145

225 110 315 155 115

225 160 340 155 145

225 200 350 155 155

250 110 350 175 115

250 160 370 175 145

250 200 390 175 155

250 225 400 175 155

280 160 390 185 145

280 225 410 185 155

280 250 420 185 175

315 200 400 190 155

315 225 400 190 155

315 250 420 190 175


End Cap With Thread Outlet

End Cap

Ød G A L

63 1〞 115 95

75 1〞 125 100

90 1〞 130 105

110 2〞 140 115

160 2〞 175 145

200 2〞 190 155

225 2〞 190 155

250 2〞 205 175

280 2〞 225 185

315 2〞 225 190

Ød A L

63 115 95

75 125 100

90 130 105

110 140 115

160 175 145

200 190 155

225 190 155

250 205 175

280 225 185

315 225 190



Double-Socket Bend 11.250

Double-Socket Bend 22.50

Ød L H

63 95 108.6

75 100 119.6

90 105 116.5

110 115 130.4

160 145 159.3

200 155 177.3

225 155 180.2

250 175 204

280 185 227.9

315 190 229.9

Ød L H

63 95 112.8

75 100 119.8

90 105 126.8

110 115 136.8

160 145 174.7

200 155 188.7

225 155 188.7

250 175 209.6

280 185 235.6

315 190 258.5



Double-Socket Bend 450

Double-Socket Bend 900

Ød L H

63 95 125.4

75 100 125

90 105 133

110 115 153

160 145 201

200 155 213

225 155 228.4

250 175 260

280 185 292

315 190 298

Ød L H

63 95 150

75 100 163

90 105 175

110 115 195

160 145 255

200 155 290

225 155 295

250 175 332.5

280 185 360

315 190 390



All Socket Tee

Ød1 Ød2 A L1 H L2

63 63 255 95 125 95

75 63 275 100 135 95

75 75 291 100 143 100

90 63 275 105 145 95

90 75 290 105 150 100

90 90 308 105 155 105

110 63 300 115 155 95

110 75 315 115 165 100

110 90 328 115 165 105

160 75 365 145 190 100

160 110 400 145 200 115

200 75 390 155 210 100

200 90 410 155 210 105

200 110 430 155 220 115

200 160 480 155 245 140

200 200 520 155 260 155

225 90 410 155 215 105

225 110 430 155 230 115

225 160 180 155 255 145

225 200 520 155 270 155

225 225 540 155 270 155

250 90 450 175 235 105

250 110 470 175 245 115

250 160 520 175 270 145

250 200 560 175 285 155

250 250 605 175 305 175

280 90 490 185 250 105

280 110 510 185 260 115

280 160 560 185 285 145

280 200 610 185 300 155

280 225 620 185 300 155

280 250 655 185 320 175

280 280 675 185 340 185

315 90 480 190 265 105

315 110 500 190 275 115

315 160 550 190 300 145

315 200 610 190 330 155

315 225 610 190 315 155

315 250 640 190 355 175

315 280 665 190 355 185

315 315 700 190 350 190


Double Socket Tee With Flanged Branch

DN Ød D K A L H 40 63 240 95 130

50 63 165 125 250 95 140

60 63 270 95 135

40 75 266 100 135

50 75 165 125 276 100 140

60 75 286 100 140

65 75 185 145 291 100 140

40 90 270 105 160

50 90 165 125 280 105 160

60 90 290 105 160

65 90 185 145 295 105 160

80 90 200 160 310 105 160

40 110 290 115 170

50 110 165 125 300 115 170

60 110 310 115 175

65 110 185 145 315 115 170

80 110 200 160 330 115 170

100 110 220 180 350 115 170

40 160 340 145 200

50 160 165 125 360 145 200

60 160 360 145 215

65 160 185 145 365 145 215

80 160 200 160 390 145 200

100 160 220 180 400 145 210

125 160 425 145 2250

150 160 285 240 450 145 220

50 200 380 155 220

60 200 390 155 220

80 200 410 155 223

100 200 430 155 240

125 200 455 155 230

150 200 480 155 270

200 200 534 155 280

60 225 390 155 240

80 225 200 160 410 155 250

100 225 220 180 430 155 250

125 225 455 155 245

150 225 285 240 480 155 250

200 225 340 295 530 155 250

60 250 430 175 250

80 250 450 175 250

100 250 470 175 255

150 250 520 175 265

200 250 570 175 275

250 250 620 175 285

80 280 200 160 470 185 280

100 280 220 180 490 185 290

150 280 285 240 540 185 290

200 280 340 295 590 185 285

250 280 400 350 640 185 290

80 315 200 160 480 190 305

100 315 220 180 500 190 310

150 315 285 240 550 190 310

200 315 340 295 600 190 290

250 315 400 350 650 190 305

300 315 455 400 700 190 310

Flanged Pipe Fittings For uPVC Pipes DIN 8061/8062


Measurements Of Flanged Dimensions in mm

Double Flanged Bend90 0

Bolt holes DN PN D K

N-d2 Bolt Size

50 PN10/16 165 125 4-Ø18 M16

65 PN10/16 185 145 4- Ø 18 M16

80 PN10/16 200 160 8- Ø 18 M16

100 PN10/16 220 180 8- Ø 18 M16

150 PN10/16 285 240 8- Ø 22 M20

PN10 340 295 8- Ø 22 M20 200

PN16 340 295 12- Ø 22 M20

PN10 400 350 12- Ø 22 M20 250

PN16 400 355 12- Ø 26 M24

PN10 455 400 12- Ø 22 M20 300

PN16 455 410 12- Ø 26 M24

DN b D K

50 150 165 125

65 165 185 145

80 165 200 160

100 180 220 180

150 220 285 240

260 340 295 200

350 400 350 250

400 455 400 300

Flanged Pipe Fittings


Double Flanged Bend45 0

Double Flanged Bend11.25 0

Double Flanged Bend22.5 0

DN b D K

50 150 165 125

65 165 185 145

80 130 200 160

100 140 220 180

150 160 285 240

180 340 295 200

350 400 350 250

400 455 400 300

DN b D K

80 130 200 160

100 140 220 180

150 160 285 240

160 340 295 200

210 400 350 250

255 455 400 300

DN b D K

80 130 200 160

100 140 220 180

150 160 285 240

160 340 295 200

210 400 350 250

255 455 400 300


Double-Flanged Bend30 0

Blank Flange

Double Flanged Pipe

DN b D K

80 130 200 160

100 140 220 180

150 160 285 240

160 340 295 200

210 400 350 250

255 455 400 300

DN D K a

50 165 125

65 185 145

80 200 160

100 220 180

150 285 240

19.0

340 295 20.0 200

400 350 22.0 250

455 400 24.5 300

L(mm)/Mass(kg) DN D K

100 150 200 250 300 400 500 600 800 1000

50 165 125 6.5 6.5 6.5 5.7 9.0 10.0 11.0 16.5 16.5

65 185 145 8.0 8.0 8.2 8.8 13.0 14.5 16.0 19.0 22.0

80 200 160 7.6 8.5 9.2 10.2 10.8 12.4 14.1 15.7 18.9 22.0

100 220 180 8.6 9.8 10.7 11.7 12.7 14.8 16.8 18.8 23.0 27.0

150 285 240 13.2 13.5 16.5 15.9 19.7 23.0 26.0 29.5 36.0 42.5

340 295 18.4 18.8 23.0 22.1 27.5 32.0 37.0 41.5 50.5 60.0 200

400 350 38.0 44.0 50.5 56.5 68.5 81.0 250

455 400 49.5 57.0 65.0 73.0 88.5 104.0 300


All Flanged Tees

DN1 DN2 L h D1 K1 D2 K2

50 50 300 150 165 125 165 125

50 157 185 145 165 125 65

65 330

165 185 145 185 145

50 160 200 160 165 125

65 165 200 160 185 145 80

80

330

165 200 160 200 160

50 170 220 180 165 125

65 175 220 180 185 145

80 175 220 180 200 160 100

100

360

180 220 180 220 180

50 500 200 285 240 165 125

65 500 207 285 240 185 145

80 205 285 240 200 160

100 210 285 240 220 180

150

150

440

220 285 240 285 240

50 520 230 340 295 165 125

65 600 240 340 295 185 145

80 235 340 295 200 160

100 240 340 295 220 180

150 250 340 295 285 240

200

200

520

260 340 295 340 290

80 270 400 350 200 160

100 275 400 350 220 180

150 300 400 350 285 240

200 325 400 350 340 295

250

250

700

350 400 350 400 350

80 290 455 400 200 160

100 300 455 400 220 180

150 325 455 400 285 240

200 350 455 400 340 295

250 375 455 400 400 350

300

300

800

400 455 400 455 400


All Flanged Cross

Double Flanged Taper

DN L D K

50 300 165 125

65 330 185 145

80 330 200 160

100 360 220 180

150 440 285 240

520 340 295 200

700 400 350 250

800 455 400 300

DN1 DN2 L D1 K1 D2 K2

65 50 185 145 165 125

50 200 160 165 125 80

65 200

200 160 185 145

50 220 180 165 125

65 220 180 185 145 100

80

200

220 180 200 160

80 285 240 200 160 150

100 200

285 240 220 180

80 340 295 200 160

100 340 295 220 180 200

150

300

340 295 285 240

100 400 350 220 180

150 400 350 285 240 250

200

300

400 350 340 295

150 455 400 285 240

200 455 400 340 295 300

250

300

455 400 400 350

Documents

Dalian Xishun Foundry Co., Ltd - ppr pipe fittings...About Dalian Xishun Foundry AProfessional Factory since 2002 Dalian XishunFoundry Co., ltd. is located in Liaoning, Dalian which